s390: clarify compressed image code path
[linux-2.6/btrfs-unstable.git] / arch / arm / mach-sa1100 / generic.c
blob345e63f4eb71f53d0038adc005c8a0f052714b2b
1 /*
2 * linux/arch/arm/mach-sa1100/generic.c
4 * Author: Nicolas Pitre
6 * Code common to all SA11x0 machines.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
12 #include <linux/gpio.h>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/dma-mapping.h>
18 #include <linux/pm.h>
19 #include <linux/cpufreq.h>
20 #include <linux/ioport.h>
21 #include <linux/platform_device.h>
22 #include <linux/reboot.h>
23 #include <linux/irqchip/irq-sa11x0.h>
25 #include <video/sa1100fb.h>
27 #include <soc/sa1100/pwer.h>
29 #include <asm/div64.h>
30 #include <asm/mach/map.h>
31 #include <asm/mach/flash.h>
32 #include <asm/irq.h>
33 #include <asm/system_misc.h>
35 #include <mach/hardware.h>
36 #include <mach/irqs.h>
38 #include "generic.h"
39 #include <clocksource/pxa.h>
41 unsigned int reset_status;
42 EXPORT_SYMBOL(reset_status);
44 #define NR_FREQS 16
47 * This table is setup for a 3.6864MHz Crystal.
49 struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
50 { .frequency = 59000, /* 59.0 MHz */},
51 { .frequency = 73700, /* 73.7 MHz */},
52 { .frequency = 88500, /* 88.5 MHz */},
53 { .frequency = 103200, /* 103.2 MHz */},
54 { .frequency = 118000, /* 118.0 MHz */},
55 { .frequency = 132700, /* 132.7 MHz */},
56 { .frequency = 147500, /* 147.5 MHz */},
57 { .frequency = 162200, /* 162.2 MHz */},
58 { .frequency = 176900, /* 176.9 MHz */},
59 { .frequency = 191700, /* 191.7 MHz */},
60 { .frequency = 206400, /* 206.4 MHz */},
61 { .frequency = 221200, /* 221.2 MHz */},
62 { .frequency = 235900, /* 235.9 MHz */},
63 { .frequency = 250700, /* 250.7 MHz */},
64 { .frequency = 265400, /* 265.4 MHz */},
65 { .frequency = 280200, /* 280.2 MHz */},
66 { .frequency = CPUFREQ_TABLE_END, },
69 unsigned int sa11x0_getspeed(unsigned int cpu)
71 if (cpu)
72 return 0;
73 return sa11x0_freq_table[PPCR & 0xf].frequency;
77 * Default power-off for SA1100
79 static void sa1100_power_off(void)
81 mdelay(100);
82 local_irq_disable();
83 /* disable internal oscillator, float CS lines */
84 PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
85 /* enable wake-up on GPIO0 (Assabet...) */
86 PWER = GFER = GRER = 1;
88 * set scratchpad to zero, just in case it is used as a
89 * restart address by the bootloader.
91 PSPR = 0;
92 /* enter sleep mode */
93 PMCR = PMCR_SF;
96 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
98 if (mode == REBOOT_SOFT) {
99 /* Jump into ROM at address 0 */
100 soft_restart(0);
101 } else {
102 /* Use on-chip reset capability */
103 RSRR = RSRR_SWR;
107 static void sa11x0_register_device(struct platform_device *dev, void *data)
109 int err;
110 dev->dev.platform_data = data;
111 err = platform_device_register(dev);
112 if (err)
113 printk(KERN_ERR "Unable to register device %s: %d\n",
114 dev->name, err);
118 static struct resource sa11x0udc_resources[] = {
119 [0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K),
120 [1] = DEFINE_RES_IRQ(IRQ_Ser0UDC),
123 static u64 sa11x0udc_dma_mask = 0xffffffffUL;
125 static struct platform_device sa11x0udc_device = {
126 .name = "sa11x0-udc",
127 .id = -1,
128 .dev = {
129 .dma_mask = &sa11x0udc_dma_mask,
130 .coherent_dma_mask = 0xffffffff,
132 .num_resources = ARRAY_SIZE(sa11x0udc_resources),
133 .resource = sa11x0udc_resources,
136 static struct resource sa11x0uart1_resources[] = {
137 [0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K),
138 [1] = DEFINE_RES_IRQ(IRQ_Ser1UART),
141 static struct platform_device sa11x0uart1_device = {
142 .name = "sa11x0-uart",
143 .id = 1,
144 .num_resources = ARRAY_SIZE(sa11x0uart1_resources),
145 .resource = sa11x0uart1_resources,
148 static struct resource sa11x0uart3_resources[] = {
149 [0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K),
150 [1] = DEFINE_RES_IRQ(IRQ_Ser3UART),
153 static struct platform_device sa11x0uart3_device = {
154 .name = "sa11x0-uart",
155 .id = 3,
156 .num_resources = ARRAY_SIZE(sa11x0uart3_resources),
157 .resource = sa11x0uart3_resources,
160 static struct resource sa11x0mcp_resources[] = {
161 [0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K),
162 [1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4),
163 [2] = DEFINE_RES_IRQ(IRQ_Ser4MCP),
166 static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
168 static struct platform_device sa11x0mcp_device = {
169 .name = "sa11x0-mcp",
170 .id = -1,
171 .dev = {
172 .dma_mask = &sa11x0mcp_dma_mask,
173 .coherent_dma_mask = 0xffffffff,
175 .num_resources = ARRAY_SIZE(sa11x0mcp_resources),
176 .resource = sa11x0mcp_resources,
179 void __init sa11x0_ppc_configure_mcp(void)
181 /* Setup the PPC unit for the MCP */
182 PPDR &= ~PPC_RXD4;
183 PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
184 PSDR |= PPC_RXD4;
185 PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
186 PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
189 void sa11x0_register_mcp(struct mcp_plat_data *data)
191 sa11x0_register_device(&sa11x0mcp_device, data);
194 static struct resource sa11x0ssp_resources[] = {
195 [0] = DEFINE_RES_MEM(0x80070000, SZ_64K),
196 [1] = DEFINE_RES_IRQ(IRQ_Ser4SSP),
199 static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
201 static struct platform_device sa11x0ssp_device = {
202 .name = "sa11x0-ssp",
203 .id = -1,
204 .dev = {
205 .dma_mask = &sa11x0ssp_dma_mask,
206 .coherent_dma_mask = 0xffffffff,
208 .num_resources = ARRAY_SIZE(sa11x0ssp_resources),
209 .resource = sa11x0ssp_resources,
212 static struct resource sa11x0fb_resources[] = {
213 [0] = DEFINE_RES_MEM(0xb0100000, SZ_64K),
214 [1] = DEFINE_RES_IRQ(IRQ_LCD),
217 static struct platform_device sa11x0fb_device = {
218 .name = "sa11x0-fb",
219 .id = -1,
220 .dev = {
221 .coherent_dma_mask = 0xffffffff,
223 .num_resources = ARRAY_SIZE(sa11x0fb_resources),
224 .resource = sa11x0fb_resources,
227 void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
229 sa11x0_register_device(&sa11x0fb_device, inf);
232 static struct platform_device sa11x0pcmcia_device = {
233 .name = "sa11x0-pcmcia",
234 .id = -1,
237 static struct platform_device sa11x0mtd_device = {
238 .name = "sa1100-mtd",
239 .id = -1,
242 void sa11x0_register_mtd(struct flash_platform_data *flash,
243 struct resource *res, int nr)
245 flash->name = "sa1100";
246 sa11x0mtd_device.resource = res;
247 sa11x0mtd_device.num_resources = nr;
248 sa11x0_register_device(&sa11x0mtd_device, flash);
251 static struct resource sa11x0ir_resources[] = {
252 DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
253 DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
254 DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
255 DEFINE_RES_IRQ(IRQ_Ser2ICP),
258 static struct platform_device sa11x0ir_device = {
259 .name = "sa11x0-ir",
260 .id = -1,
261 .num_resources = ARRAY_SIZE(sa11x0ir_resources),
262 .resource = sa11x0ir_resources,
265 void sa11x0_register_irda(struct irda_platform_data *irda)
267 sa11x0_register_device(&sa11x0ir_device, irda);
270 static struct resource sa1100_rtc_resources[] = {
271 DEFINE_RES_MEM(0x90010000, 0x40),
272 DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
273 DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
276 static struct platform_device sa11x0rtc_device = {
277 .name = "sa1100-rtc",
278 .id = -1,
279 .num_resources = ARRAY_SIZE(sa1100_rtc_resources),
280 .resource = sa1100_rtc_resources,
283 static struct resource sa11x0dma_resources[] = {
284 DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE),
285 DEFINE_RES_IRQ(IRQ_DMA0),
286 DEFINE_RES_IRQ(IRQ_DMA1),
287 DEFINE_RES_IRQ(IRQ_DMA2),
288 DEFINE_RES_IRQ(IRQ_DMA3),
289 DEFINE_RES_IRQ(IRQ_DMA4),
290 DEFINE_RES_IRQ(IRQ_DMA5),
293 static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32);
295 static struct platform_device sa11x0dma_device = {
296 .name = "sa11x0-dma",
297 .id = -1,
298 .dev = {
299 .dma_mask = &sa11x0dma_dma_mask,
300 .coherent_dma_mask = 0xffffffff,
302 .num_resources = ARRAY_SIZE(sa11x0dma_resources),
303 .resource = sa11x0dma_resources,
306 static struct platform_device *sa11x0_devices[] __initdata = {
307 &sa11x0udc_device,
308 &sa11x0uart1_device,
309 &sa11x0uart3_device,
310 &sa11x0ssp_device,
311 &sa11x0pcmcia_device,
312 &sa11x0rtc_device,
313 &sa11x0dma_device,
316 static int __init sa1100_init(void)
318 pm_power_off = sa1100_power_off;
319 return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
322 arch_initcall(sa1100_init);
324 void __init sa11x0_init_late(void)
326 sa11x0_pm_init();
330 * Common I/O mapping:
332 * Typically, static virtual address mappings are as follow:
334 * 0xf0000000-0xf3ffffff: miscellaneous stuff (CPLDs, etc.)
335 * 0xf4000000-0xf4ffffff: SA-1111
336 * 0xf5000000-0xf5ffffff: reserved (used by cache flushing area)
337 * 0xf6000000-0xfffeffff: reserved (internal SA1100 IO defined above)
338 * 0xffff0000-0xffff0fff: SA1100 exception vectors
339 * 0xffff2000-0xffff2fff: Minicache copy_user_page area
341 * Below 0xe8000000 is reserved for vm allocation.
343 * The machine specific code must provide the extra mapping beside the
344 * default mapping provided here.
347 static struct map_desc standard_io_desc[] __initdata = {
348 { /* PCM */
349 .virtual = 0xf8000000,
350 .pfn = __phys_to_pfn(0x80000000),
351 .length = 0x00100000,
352 .type = MT_DEVICE
353 }, { /* SCM */
354 .virtual = 0xfa000000,
355 .pfn = __phys_to_pfn(0x90000000),
356 .length = 0x00100000,
357 .type = MT_DEVICE
358 }, { /* MER */
359 .virtual = 0xfc000000,
360 .pfn = __phys_to_pfn(0xa0000000),
361 .length = 0x00100000,
362 .type = MT_DEVICE
363 }, { /* LCD + DMA */
364 .virtual = 0xfe000000,
365 .pfn = __phys_to_pfn(0xb0000000),
366 .length = 0x00200000,
367 .type = MT_DEVICE
371 void __init sa1100_map_io(void)
373 iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
376 void __init sa1100_timer_init(void)
378 pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400);
381 static struct resource irq_resource =
382 DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
384 void __init sa1100_init_irq(void)
386 request_resource(&iomem_resource, &irq_resource);
388 sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
390 sa1100_init_gpio();
394 * Disable the memory bus request/grant signals on the SA1110 to
395 * ensure that we don't receive spurious memory requests. We set
396 * the MBGNT signal false to ensure the SA1111 doesn't own the
397 * SDRAM bus.
399 void sa1110_mb_disable(void)
401 unsigned long flags;
403 local_irq_save(flags);
405 PGSR &= ~GPIO_MBGNT;
406 GPCR = GPIO_MBGNT;
407 GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
409 GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);
411 local_irq_restore(flags);
415 * If the system is going to use the SA-1111 DMA engines, set up
416 * the memory bus request/grant pins.
418 void sa1110_mb_enable(void)
420 unsigned long flags;
422 local_irq_save(flags);
424 PGSR &= ~GPIO_MBGNT;
425 GPCR = GPIO_MBGNT;
426 GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
428 GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
429 TUCR |= TUCR_MR;
431 local_irq_restore(flags);
434 int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
436 if (on)
437 PWER |= BIT(gpio);
438 else
439 PWER &= ~BIT(gpio);
441 return 0;
444 int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
446 if (BIT(irq) != IC_RTCAlrm)
447 return -EINVAL;
449 if (on)
450 PWER |= PWER_RTC;
451 else
452 PWER &= ~PWER_RTC;
454 return 0;