License cleanup: add SPDX GPL-2.0 license identifier to files with no license
[linux-2.6/btrfs-unstable.git] / arch / x86 / include / asm / iosf_mbi.h
blob7d87437bd0306b7c632f3394ca9989826212a62c
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * Intel OnChip System Fabric MailBox access support
4 */
6 #ifndef IOSF_MBI_SYMS_H
7 #define IOSF_MBI_SYMS_H
9 #include <linux/notifier.h>
11 #define MBI_MCR_OFFSET 0xD0
12 #define MBI_MDR_OFFSET 0xD4
13 #define MBI_MCRX_OFFSET 0xD8
15 #define MBI_RD_MASK 0xFEFFFFFF
16 #define MBI_WR_MASK 0X01000000
18 #define MBI_MASK_HI 0xFFFFFF00
19 #define MBI_MASK_LO 0x000000FF
20 #define MBI_ENABLE 0xF0
22 /* IOSF SB read/write opcodes */
23 #define MBI_MMIO_READ 0x00
24 #define MBI_MMIO_WRITE 0x01
25 #define MBI_CFG_READ 0x04
26 #define MBI_CFG_WRITE 0x05
27 #define MBI_CR_READ 0x06
28 #define MBI_CR_WRITE 0x07
29 #define MBI_REG_READ 0x10
30 #define MBI_REG_WRITE 0x11
31 #define MBI_ESRAM_READ 0x12
32 #define MBI_ESRAM_WRITE 0x13
34 /* Baytrail available units */
35 #define BT_MBI_UNIT_AUNIT 0x00
36 #define BT_MBI_UNIT_SMC 0x01
37 #define BT_MBI_UNIT_CPU 0x02
38 #define BT_MBI_UNIT_BUNIT 0x03
39 #define BT_MBI_UNIT_PMC 0x04
40 #define BT_MBI_UNIT_GFX 0x06
41 #define BT_MBI_UNIT_SMI 0x0C
42 #define BT_MBI_UNIT_USB 0x43
43 #define BT_MBI_UNIT_SATA 0xA3
44 #define BT_MBI_UNIT_PCIE 0xA6
46 /* Quark available units */
47 #define QRK_MBI_UNIT_HBA 0x00
48 #define QRK_MBI_UNIT_HB 0x03
49 #define QRK_MBI_UNIT_RMU 0x04
50 #define QRK_MBI_UNIT_MM 0x05
51 #define QRK_MBI_UNIT_SOC 0x31
53 /* Action values for the pmic_bus_access_notifier functions */
54 #define MBI_PMIC_BUS_ACCESS_BEGIN 1
55 #define MBI_PMIC_BUS_ACCESS_END 2
57 #if IS_ENABLED(CONFIG_IOSF_MBI)
59 bool iosf_mbi_available(void);
61 /**
62 * iosf_mbi_read() - MailBox Interface read command
63 * @port: port indicating subunit being accessed
64 * @opcode: port specific read or write opcode
65 * @offset: register address offset
66 * @mdr: register data to be read
68 * Locking is handled by spinlock - cannot sleep.
69 * Return: Nonzero on error
71 int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr);
73 /**
74 * iosf_mbi_write() - MailBox unmasked write command
75 * @port: port indicating subunit being accessed
76 * @opcode: port specific read or write opcode
77 * @offset: register address offset
78 * @mdr: register data to be written
80 * Locking is handled by spinlock - cannot sleep.
81 * Return: Nonzero on error
83 int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
85 /**
86 * iosf_mbi_modify() - MailBox masked write command
87 * @port: port indicating subunit being accessed
88 * @opcode: port specific read or write opcode
89 * @offset: register address offset
90 * @mdr: register data being modified
91 * @mask: mask indicating bits in mdr to be modified
93 * Locking is handled by spinlock - cannot sleep.
94 * Return: Nonzero on error
96 int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
98 /**
99 * iosf_mbi_punit_acquire() - Acquire access to the P-Unit
101 * One some systems the P-Unit accesses the PMIC to change various voltages
102 * through the same bus as other kernel drivers use for e.g. battery monitoring.
104 * If a driver sends requests to the P-Unit which require the P-Unit to access
105 * the PMIC bus while another driver is also accessing the PMIC bus various bad
106 * things happen.
108 * To avoid these problems this function must be called before accessing the
109 * P-Unit or the PMIC, be it through iosf_mbi* functions or through other means.
111 * Note on these systems the i2c-bus driver will request a sempahore from the
112 * P-Unit for exclusive access to the PMIC bus when i2c drivers are accessing
113 * it, but this does not appear to be sufficient, we still need to avoid making
114 * certain P-Unit requests during the access window to avoid problems.
116 * This function locks a mutex, as such it may sleep.
118 void iosf_mbi_punit_acquire(void);
121 * iosf_mbi_punit_release() - Release access to the P-Unit
123 void iosf_mbi_punit_release(void);
126 * iosf_mbi_register_pmic_bus_access_notifier - Register PMIC bus notifier
128 * This function can be used by drivers which may need to acquire P-Unit
129 * managed resources from interrupt context, where iosf_mbi_punit_acquire()
130 * can not be used.
132 * This function allows a driver to register a notifier to get notified (in a
133 * process context) before other drivers start accessing the PMIC bus.
135 * This allows the driver to acquire any resources, which it may need during
136 * the window the other driver is accessing the PMIC, before hand.
138 * @nb: notifier_block to register
140 int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb);
143 * iosf_mbi_register_pmic_bus_access_notifier - Unregister PMIC bus notifier
145 * @nb: notifier_block to unregister
147 int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb);
150 * iosf_mbi_call_pmic_bus_access_notifier_chain - Call PMIC bus notifier chain
152 * @val: action to pass into listener's notifier_call function
153 * @v: data pointer to pass into listener's notifier_call function
155 int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v);
157 #else /* CONFIG_IOSF_MBI is not enabled */
158 static inline
159 bool iosf_mbi_available(void)
161 return false;
164 static inline
165 int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
167 WARN(1, "IOSF_MBI driver not available");
168 return -EPERM;
171 static inline
172 int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
174 WARN(1, "IOSF_MBI driver not available");
175 return -EPERM;
178 static inline
179 int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
181 WARN(1, "IOSF_MBI driver not available");
182 return -EPERM;
185 static inline void iosf_mbi_punit_acquire(void) {}
186 static inline void iosf_mbi_punit_release(void) {}
188 static inline
189 int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb)
191 return 0;
194 static inline
195 int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb)
197 return 0;
200 static inline
201 int iosf_mbi_call_pmic_bus_access_notifier_chain(unsigned long val, void *v)
203 return 0;
206 #endif /* CONFIG_IOSF_MBI */
208 #endif /* IOSF_MBI_SYMS_H */