sound/soc/codecs/tas5086.c

   1 /*
   2  * TAS5086 ASoC codec driver
   3  *
   4  * Copyright (c) 2013 Daniel Mack <zonque@gmail.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version 2
   9  * of the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * TODO:
  17  *  - implement DAPM and input muxing
  18  *  - implement modulation limit
  19  *  - implement non-default PWM start
  20  *
  21  * Note that this chip has a very unusual register layout, specifically
  22  * because the registers are of unequal size, and multi-byte registers
  23  * require bulk writes to take effect. Regmap does not support that kind
  24  * of devices.
  25  *
  26  * Currently, the driver does not touch any of the registers >= 0x20, so
  27  * it doesn't matter because the entire map can be accessed as 8-bit
  28  * array. In case more features will be added in the future
  29  * that require access to higher registers, the entire regmap H/W I/O
  30  * routines have to be open-coded.
  31  */
  32
  33 #include <linux/module.h>
  34 #include <linux/slab.h>
  35 #include <linux/delay.h>
  36 #include <linux/gpio.h>
  37 #include <linux/i2c.h>
  38 #include <linux/regmap.h>
  39 #include <linux/regulator/consumer.h>
  40 #include <linux/spi/spi.h>
  41 #include <linux/of.h>
  42 #include <linux/of_device.h>
  43 #include <linux/of_gpio.h>
  44 #include <sound/pcm.h>
  45 #include <sound/pcm_params.h>
  46 #include <sound/soc.h>
  47 #include <sound/tlv.h>
  48 #include <sound/tas5086.h>
  49
  50 #define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE  |         \
  51                              SNDRV_PCM_FMTBIT_S20_3LE |         \
  52                              SNDRV_PCM_FMTBIT_S24_3LE)
  53
  54 #define TAS5086_PCM_RATES   (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100  | \
  55                              SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200  | \
  56                              SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \
  57                              SNDRV_PCM_RATE_192000)
  58
  59 /*
  60  * TAS5086 registers
  61  */
  62 #define TAS5086_CLOCK_CONTROL           0x00    /* Clock control register  */
  63 #define TAS5086_CLOCK_RATE(val)         (val << 5)
  64 #define TAS5086_CLOCK_RATE_MASK         (0x7 << 5)
  65 #define TAS5086_CLOCK_RATIO(val)        (val << 2)
  66 #define TAS5086_CLOCK_RATIO_MASK        (0x7 << 2)
  67 #define TAS5086_CLOCK_SCLK_RATIO_48     (1 << 1)
  68 #define TAS5086_CLOCK_VALID             (1 << 0)
  69
  70 #define TAS5086_DEEMPH_MASK             0x03
  71 #define TAS5086_SOFT_MUTE_ALL           0x3f
  72
  73 #define TAS5086_DEV_ID                  0x01    /* Device ID register */
  74 #define TAS5086_ERROR_STATUS            0x02    /* Error status register */
  75 #define TAS5086_SYS_CONTROL_1           0x03    /* System control register 1 */
  76 #define TAS5086_SERIAL_DATA_IF          0x04    /* Serial data interface register  */
  77 #define TAS5086_SYS_CONTROL_2           0x05    /* System control register 2 */
  78 #define TAS5086_SOFT_MUTE               0x06    /* Soft mute register */
  79 #define TAS5086_MASTER_VOL              0x07    /* Master volume  */
  80 #define TAS5086_CHANNEL_VOL(X)          (0x08 + (X))    /* Channel 1-6 volume */
  81 #define TAS5086_VOLUME_CONTROL          0x09    /* Volume control register */
  82 #define TAS5086_MOD_LIMIT               0x10    /* Modulation limit register */
  83 #define TAS5086_PWM_START               0x18    /* PWM start register */
  84 #define TAS5086_SURROUND                0x19    /* Surround register */
  85 #define TAS5086_SPLIT_CAP_CHARGE        0x1a    /* Split cap charge period register */
  86 #define TAS5086_OSC_TRIM                0x1b    /* Oscillator trim register */
  87 #define TAS5086_BKNDERR                 0x1c
  88 #define TAS5086_INPUT_MUX               0x20
  89 #define TAS5086_PWM_OUTPUT_MUX          0x25
  90
  91 #define TAS5086_MAX_REGISTER            TAS5086_PWM_OUTPUT_MUX
  92
  93 #define TAS5086_PWM_START_MIDZ_FOR_START_1      (1 << 7)
  94 #define TAS5086_PWM_START_MIDZ_FOR_START_2      (1 << 6)
  95 #define TAS5086_PWM_START_CHANNEL_MASK          (0x3f)
  96
  97 /*
  98  * Default TAS5086 power-up configuration
  99  */
 100 static const struct reg_default tas5086_reg_defaults[] = {
 101         { 0x00, 0x6c },
 102         { 0x01, 0x03 },
 103         { 0x02, 0x00 },
 104         { 0x03, 0xa0 },
 105         { 0x04, 0x05 },
 106         { 0x05, 0x60 },
 107         { 0x06, 0x00 },
 108         { 0x07, 0xff },
 109         { 0x08, 0x30 },
 110         { 0x09, 0x30 },
 111         { 0x0a, 0x30 },
 112         { 0x0b, 0x30 },
 113         { 0x0c, 0x30 },
 114         { 0x0d, 0x30 },
 115         { 0x0e, 0xb1 },
 116         { 0x0f, 0x00 },
 117         { 0x10, 0x02 },
 118         { 0x11, 0x00 },
 119         { 0x12, 0x00 },
 120         { 0x13, 0x00 },
 121         { 0x14, 0x00 },
 122         { 0x15, 0x00 },
 123         { 0x16, 0x00 },
 124         { 0x17, 0x00 },
 125         { 0x18, 0x3f },
 126         { 0x19, 0x00 },
 127         { 0x1a, 0x18 },
 128         { 0x1b, 0x82 },
 129         { 0x1c, 0x05 },
 130 };
 131
 132 static int tas5086_register_size(struct device *dev, unsigned int reg)
 133 {
 134         switch (reg) {
 135         case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR:
 136                 return 1;
 137         case TAS5086_INPUT_MUX:
 138         case TAS5086_PWM_OUTPUT_MUX:
 139                 return 4;
 140         }
 141
 142         dev_err(dev, "Unsupported register address: %d\n", reg);
 143         return 0;
 144 }
 145
 146 static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
 147 {
 148         switch (reg) {
 149         case 0x0f:
 150         case 0x11 ... 0x17:
 151         case 0x1d ... 0x1f:
 152                 return false;
 153         default:
 154                 return true;
 155         }
 156 }
 157
 158 static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
 159 {
 160         switch (reg) {
 161         case TAS5086_DEV_ID:
 162         case TAS5086_ERROR_STATUS:
 163                 return true;
 164         }
 165
 166         return false;
 167 }
 168
 169 static bool tas5086_writeable_reg(struct device *dev, unsigned int reg)
 170 {
 171         return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
 172 }
 173
 174 static int tas5086_reg_write(void *context, unsigned int reg,
 175                               unsigned int value)
 176 {
 177         struct i2c_client *client = context;
 178         unsigned int i, size;
 179         uint8_t buf[5];
 180         int ret;
 181
 182         size = tas5086_register_size(&client->dev, reg);
 183         if (size == 0)
 184                 return -EINVAL;
 185
 186         buf[0] = reg;
 187
 188         for (i = size; i >= 1; --i) {
 189                 buf[i] = value;
 190                 value >>= 8;
 191         }
 192
 193         ret = i2c_master_send(client, buf, size + 1);
 194         if (ret == size + 1)
 195                 return 0;
 196         else if (ret < 0)
 197                 return ret;
 198         else
 199                 return -EIO;
 200 }
 201
 202 static int tas5086_reg_read(void *context, unsigned int reg,
 203                              unsigned int *value)
 204 {
 205         struct i2c_client *client = context;
 206         uint8_t send_buf, recv_buf[4];
 207         struct i2c_msg msgs[2];
 208         unsigned int size;
 209         unsigned int i;
 210         int ret;
 211
 212         size = tas5086_register_size(&client->dev, reg);
 213         if (size == 0)
 214                 return -EINVAL;
 215
 216         send_buf = reg;
 217
 218         msgs[0].addr = client->addr;
 219         msgs[0].len = sizeof(send_buf);
 220         msgs[0].buf = &send_buf;
 221         msgs[0].flags = 0;
 222
 223         msgs[1].addr = client->addr;
 224         msgs[1].len = size;
 225         msgs[1].buf = recv_buf;
 226         msgs[1].flags = I2C_M_RD;
 227
 228         ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 229         if (ret < 0)
 230                 return ret;
 231         else if (ret != ARRAY_SIZE(msgs))
 232                 return -EIO;
 233
 234         *value = 0;
 235
 236         for (i = 0; i < size; i++) {
 237                 *value <<= 8;
 238                 *value |= recv_buf[i];
 239         }
 240
 241         return 0;
 242 }
 243
 244 static const char * const supply_names[] = {
 245         "dvdd", "avdd"
 246 };
 247
 248 struct tas5086_private {
 249         struct regmap   *regmap;
 250         unsigned int    mclk, sclk;
 251         unsigned int    format;
 252         bool            deemph;
 253         unsigned int    charge_period;
 254         unsigned int    pwm_start_mid_z;
 255         /* Current sample rate for de-emphasis control */
 256         int             rate;
 257         /* GPIO driving Reset pin, if any */
 258         int             gpio_nreset;
 259         struct          regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
 260 };
 261
 262 static int tas5086_deemph[] = { 0, 32000, 44100, 48000 };
 263
 264 static int tas5086_set_deemph(struct snd_soc_component *component)
 265 {
 266         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 267         int i, val = 0;
 268
 269         if (priv->deemph) {
 270                 for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) {
 271                         if (tas5086_deemph[i] == priv->rate) {
 272                                 val = i;
 273                                 break;
 274                         }
 275                 }
 276         }
 277
 278         return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1,
 279                                   TAS5086_DEEMPH_MASK, val);
 280 }
 281
 282 static int tas5086_get_deemph(struct snd_kcontrol *kcontrol,
 283                               struct snd_ctl_elem_value *ucontrol)
 284 {
 285         struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
 286         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 287
 288         ucontrol->value.integer.value[0] = priv->deemph;
 289
 290         return 0;
 291 }
 292
 293 static int tas5086_put_deemph(struct snd_kcontrol *kcontrol,
 294                               struct snd_ctl_elem_value *ucontrol)
 295 {
 296         struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
 297         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 298
 299         priv->deemph = ucontrol->value.integer.value[0];
 300
 301         return tas5086_set_deemph(component);
 302 }
 303
 304
 305 static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 306                                   int clk_id, unsigned int freq, int dir)
 307 {
 308         struct snd_soc_component *component = codec_dai->component;
 309         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 310
 311         switch (clk_id) {
 312         case TAS5086_CLK_IDX_MCLK:
 313                 priv->mclk = freq;
 314                 break;
 315         case TAS5086_CLK_IDX_SCLK:
 316                 priv->sclk = freq;
 317                 break;
 318         }
 319
 320         return 0;
 321 }
 322
 323 static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai,
 324                                unsigned int format)
 325 {
 326         struct snd_soc_component *component = codec_dai->component;
 327         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 328
 329         /* The TAS5086 can only be slave to all clocks */
 330         if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
 331                 dev_err(component->dev, "Invalid clocking mode\n");
 332                 return -EINVAL;
 333         }
 334
 335         /* we need to refer to the data format from hw_params() */
 336         priv->format = format;
 337
 338         return 0;
 339 }
 340
 341 static const int tas5086_sample_rates[] = {
 342         32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000
 343 };
 344
 345 static const int tas5086_ratios[] = {
 346         64, 128, 192, 256, 384, 512
 347 };
 348
 349 static int index_in_array(const int *array, int len, int needle)
 350 {
 351         int i;
 352
 353         for (i = 0; i < len; i++)
 354                 if (array[i] == needle)
 355                         return i;
 356
 357         return -ENOENT;
 358 }
 359
 360 static int tas5086_hw_params(struct snd_pcm_substream *substream,
 361                              struct snd_pcm_hw_params *params,
 362                              struct snd_soc_dai *dai)
 363 {
 364         struct snd_soc_component *component = dai->component;
 365         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 366         int val;
 367         int ret;
 368
 369         priv->rate = params_rate(params);
 370
 371         /* Look up the sample rate and refer to the offset in the list */
 372         val = index_in_array(tas5086_sample_rates,
 373                              ARRAY_SIZE(tas5086_sample_rates), priv->rate);
 374
 375         if (val < 0) {
 376                 dev_err(component->dev, "Invalid sample rate\n");
 377                 return -EINVAL;
 378         }
 379
 380         ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
 381                                  TAS5086_CLOCK_RATE_MASK,
 382                                  TAS5086_CLOCK_RATE(val));
 383         if (ret < 0)
 384                 return ret;
 385
 386         /* MCLK / Fs ratio */
 387         val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios),
 388                              priv->mclk / priv->rate);
 389         if (val < 0) {
 390                 dev_err(component->dev, "Invalid MCLK / Fs ratio\n");
 391                 return -EINVAL;
 392         }
 393
 394         ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
 395                                  TAS5086_CLOCK_RATIO_MASK,
 396                                  TAS5086_CLOCK_RATIO(val));
 397         if (ret < 0)
 398                 return ret;
 399
 400
 401         ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
 402                                  TAS5086_CLOCK_SCLK_RATIO_48,
 403                                  (priv->sclk == 48 * priv->rate) ?
 404                                         TAS5086_CLOCK_SCLK_RATIO_48 : 0);
 405         if (ret < 0)
 406                 return ret;
 407
 408         /*
 409          * The chip has a very unituitive register mapping and muxes information
 410          * about data format and sample depth into the same register, but not on
 411          * a logical bit-boundary. Hence, we have to refer to the format passed
 412          * in the set_dai_fmt() callback and set up everything from here.
 413          *
 414          * First, determine the 'base' value, using the format ...
 415          */
 416         switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
 417         case SND_SOC_DAIFMT_RIGHT_J:
 418                 val = 0x00;
 419                 break;
 420         case SND_SOC_DAIFMT_I2S:
 421                 val = 0x03;
 422                 break;
 423         case SND_SOC_DAIFMT_LEFT_J:
 424                 val = 0x06;
 425                 break;
 426         default:
 427                 dev_err(component->dev, "Invalid DAI format\n");
 428                 return -EINVAL;
 429         }
 430
 431         /* ... then add the offset for the sample bit depth. */
 432         switch (params_width(params)) {
 433         case 16:
 434                 val += 0;
 435                 break;
 436         case 20:
 437                 val += 1;
 438                 break;
 439         case 24:
 440                 val += 2;
 441                 break;
 442         default:
 443                 dev_err(component->dev, "Invalid bit width\n");
 444                 return -EINVAL;
 445         }
 446
 447         ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val);
 448         if (ret < 0)
 449                 return ret;
 450
 451         /* clock is considered valid now */
 452         ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
 453                                  TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID);
 454         if (ret < 0)
 455                 return ret;
 456
 457         return tas5086_set_deemph(component);
 458 }
 459
 460 static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 461 {
 462         struct snd_soc_component *component = dai->component;
 463         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 464         unsigned int val = 0;
 465
 466         if (mute)
 467                 val = TAS5086_SOFT_MUTE_ALL;
 468
 469         return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val);
 470 }
 471
 472 static void tas5086_reset(struct tas5086_private *priv)
 473 {
 474         if (gpio_is_valid(priv->gpio_nreset)) {
 475                 /* Reset codec - minimum assertion time is 400ns */
 476                 gpio_direction_output(priv->gpio_nreset, 0);
 477                 udelay(1);
 478                 gpio_set_value(priv->gpio_nreset, 1);
 479
 480                 /* Codec needs ~15ms to wake up */
 481                 msleep(15);
 482         }
 483 }
 484
 485 /* charge period values in microseconds */
 486 static const int tas5086_charge_period[] = {
 487           13000,  16900,   23400,   31200,   41600,   54600,   72800,   96200,
 488          130000, 156000,  234000,  312000,  416000,  546000,  728000,  962000,
 489         1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000,
 490 };
 491
 492 static int tas5086_init(struct device *dev, struct tas5086_private *priv)
 493 {
 494         int ret, i;
 495
 496         /*
 497          * If any of the channels is configured to start in Mid-Z mode,
 498          * configure 'part 1' of the PWM starts to use Mid-Z, and tell
 499          * all configured mid-z channels to start start under 'part 1'.
 500          */
 501         if (priv->pwm_start_mid_z)
 502                 regmap_write(priv->regmap, TAS5086_PWM_START,
 503                              TAS5086_PWM_START_MIDZ_FOR_START_1 |
 504                                 priv->pwm_start_mid_z);
 505
 506         /* lookup and set split-capacitor charge period */
 507         if (priv->charge_period == 0) {
 508                 regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
 509         } else {
 510                 i = index_in_array(tas5086_charge_period,
 511                                    ARRAY_SIZE(tas5086_charge_period),
 512                                    priv->charge_period);
 513                 if (i >= 0)
 514                         regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE,
 515                                      i + 0x08);
 516                 else
 517                         dev_warn(dev,
 518                                  "Invalid split-cap charge period of %d ns.\n",
 519                                  priv->charge_period);
 520         }
 521
 522         /* enable factory trim */
 523         ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00);
 524         if (ret < 0)
 525                 return ret;
 526
 527         /* start all channels */
 528         ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20);
 529         if (ret < 0)
 530                 return ret;
 531
 532         /* mute all channels for now */
 533         ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE,
 534                            TAS5086_SOFT_MUTE_ALL);
 535         if (ret < 0)
 536                 return ret;
 537
 538         return 0;
 539 }
 540
 541 /* TAS5086 controls */
 542 static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1);
 543
 544 static const struct snd_kcontrol_new tas5086_controls[] = {
 545         SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL,
 546                        0, 0xff, 1, tas5086_dac_tlv),
 547         SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume",
 548                          TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1),
 549                          0, 0xff, 1, tas5086_dac_tlv),
 550         SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume",
 551                          TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3),
 552                          0, 0xff, 1, tas5086_dac_tlv),
 553         SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume",
 554                          TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5),
 555                          0, 0xff, 1, tas5086_dac_tlv),
 556         SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0,
 557                             tas5086_get_deemph, tas5086_put_deemph),
 558 };
 559
 560 /* Input mux controls */
 561 static const char *tas5086_dapm_sdin_texts[] =
 562 {
 563         "SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R",
 564         "SDIN3-L", "SDIN3-R", "Ground (0)", "nc"
 565 };
 566
 567 static const struct soc_enum tas5086_dapm_input_mux_enum[] = {
 568         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts),
 569         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts),
 570         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts),
 571         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8,  8, tas5086_dapm_sdin_texts),
 572         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4,  8, tas5086_dapm_sdin_texts),
 573         SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0,  8, tas5086_dapm_sdin_texts),
 574 };
 575
 576 static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = {
 577         SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]),
 578         SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]),
 579         SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]),
 580         SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]),
 581         SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]),
 582         SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]),
 583 };
 584
 585 /* Output mux controls */
 586 static const char *tas5086_dapm_channel_texts[] =
 587         { "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux",
 588           "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" };
 589
 590 static const struct soc_enum tas5086_dapm_output_mux_enum[] = {
 591         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts),
 592         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts),
 593         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts),
 594         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8,  6, tas5086_dapm_channel_texts),
 595         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4,  6, tas5086_dapm_channel_texts),
 596         SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0,  6, tas5086_dapm_channel_texts),
 597 };
 598
 599 static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = {
 600         SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]),
 601         SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]),
 602         SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]),
 603         SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]),
 604         SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]),
 605         SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]),
 606 };
 607
 608 static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = {
 609         SND_SOC_DAPM_INPUT("SDIN1-L"),
 610         SND_SOC_DAPM_INPUT("SDIN1-R"),
 611         SND_SOC_DAPM_INPUT("SDIN2-L"),
 612         SND_SOC_DAPM_INPUT("SDIN2-R"),
 613         SND_SOC_DAPM_INPUT("SDIN3-L"),
 614         SND_SOC_DAPM_INPUT("SDIN3-R"),
 615         SND_SOC_DAPM_INPUT("SDIN4-L"),
 616         SND_SOC_DAPM_INPUT("SDIN4-R"),
 617
 618         SND_SOC_DAPM_OUTPUT("PWM1"),
 619         SND_SOC_DAPM_OUTPUT("PWM2"),
 620         SND_SOC_DAPM_OUTPUT("PWM3"),
 621         SND_SOC_DAPM_OUTPUT("PWM4"),
 622         SND_SOC_DAPM_OUTPUT("PWM5"),
 623         SND_SOC_DAPM_OUTPUT("PWM6"),
 624
 625         SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0,
 626                          &tas5086_dapm_input_mux_controls[0]),
 627         SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0,
 628                          &tas5086_dapm_input_mux_controls[1]),
 629         SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0,
 630                          &tas5086_dapm_input_mux_controls[2]),
 631         SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0,
 632                          &tas5086_dapm_input_mux_controls[3]),
 633         SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0,
 634                          &tas5086_dapm_input_mux_controls[4]),
 635         SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0,
 636                          &tas5086_dapm_input_mux_controls[5]),
 637
 638         SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0,
 639                          &tas5086_dapm_output_mux_controls[0]),
 640         SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0,
 641                          &tas5086_dapm_output_mux_controls[1]),
 642         SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0,
 643                          &tas5086_dapm_output_mux_controls[2]),
 644         SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0,
 645                          &tas5086_dapm_output_mux_controls[3]),
 646         SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0,
 647                          &tas5086_dapm_output_mux_controls[4]),
 648         SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0,
 649                          &tas5086_dapm_output_mux_controls[5]),
 650 };
 651
 652 static const struct snd_soc_dapm_route tas5086_dapm_routes[] = {
 653         /* SDIN inputs -> channel muxes */
 654         { "Channel 1 Mux", "SDIN1-L", "SDIN1-L" },
 655         { "Channel 1 Mux", "SDIN1-R", "SDIN1-R" },
 656         { "Channel 1 Mux", "SDIN2-L", "SDIN2-L" },
 657         { "Channel 1 Mux", "SDIN2-R", "SDIN2-R" },
 658         { "Channel 1 Mux", "SDIN3-L", "SDIN3-L" },
 659         { "Channel 1 Mux", "SDIN3-R", "SDIN3-R" },
 660
 661         { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
 662         { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
 663         { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
 664         { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
 665         { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
 666         { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
 667
 668         { "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
 669         { "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
 670         { "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
 671         { "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
 672         { "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
 673         { "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },
 674
 675         { "Channel 3 Mux", "SDIN1-L", "SDIN1-L" },
 676         { "Channel 3 Mux", "SDIN1-R", "SDIN1-R" },
 677         { "Channel 3 Mux", "SDIN2-L", "SDIN2-L" },
 678         { "Channel 3 Mux", "SDIN2-R", "SDIN2-R" },
 679         { "Channel 3 Mux", "SDIN3-L", "SDIN3-L" },
 680         { "Channel 3 Mux", "SDIN3-R", "SDIN3-R" },
 681
 682         { "Channel 4 Mux", "SDIN1-L", "SDIN1-L" },
 683         { "Channel 4 Mux", "SDIN1-R", "SDIN1-R" },
 684         { "Channel 4 Mux", "SDIN2-L", "SDIN2-L" },
 685         { "Channel 4 Mux", "SDIN2-R", "SDIN2-R" },
 686         { "Channel 4 Mux", "SDIN3-L", "SDIN3-L" },
 687         { "Channel 4 Mux", "SDIN3-R", "SDIN3-R" },
 688
 689         { "Channel 5 Mux", "SDIN1-L", "SDIN1-L" },
 690         { "Channel 5 Mux", "SDIN1-R", "SDIN1-R" },
 691         { "Channel 5 Mux", "SDIN2-L", "SDIN2-L" },
 692         { "Channel 5 Mux", "SDIN2-R", "SDIN2-R" },
 693         { "Channel 5 Mux", "SDIN3-L", "SDIN3-L" },
 694         { "Channel 5 Mux", "SDIN3-R", "SDIN3-R" },
 695
 696         { "Channel 6 Mux", "SDIN1-L", "SDIN1-L" },
 697         { "Channel 6 Mux", "SDIN1-R", "SDIN1-R" },
 698         { "Channel 6 Mux", "SDIN2-L", "SDIN2-L" },
 699         { "Channel 6 Mux", "SDIN2-R", "SDIN2-R" },
 700         { "Channel 6 Mux", "SDIN3-L", "SDIN3-L" },
 701         { "Channel 6 Mux", "SDIN3-R", "SDIN3-R" },
 702
 703         /* Channel muxes -> PWM muxes */
 704         { "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 705         { "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 706         { "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 707         { "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 708         { "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 709         { "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" },
 710
 711         { "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 712         { "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 713         { "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 714         { "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 715         { "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 716         { "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" },
 717
 718         { "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 719         { "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 720         { "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 721         { "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 722         { "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 723         { "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" },
 724
 725         { "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 726         { "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 727         { "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 728         { "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 729         { "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 730         { "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" },
 731
 732         { "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 733         { "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 734         { "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 735         { "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 736         { "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 737         { "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" },
 738
 739         { "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 740         { "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 741         { "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 742         { "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 743         { "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 744         { "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" },
 745
 746         /* The PWM muxes are directly connected to the PWM outputs */
 747         { "PWM1", NULL, "PWM1 Mux" },
 748         { "PWM2", NULL, "PWM2 Mux" },
 749         { "PWM3", NULL, "PWM3 Mux" },
 750         { "PWM4", NULL, "PWM4 Mux" },
 751         { "PWM5", NULL, "PWM5 Mux" },
 752         { "PWM6", NULL, "PWM6 Mux" },
 753
 754 };
 755
 756 static const struct snd_soc_dai_ops tas5086_dai_ops = {
 757         .hw_params      = tas5086_hw_params,
 758         .set_sysclk     = tas5086_set_dai_sysclk,
 759         .set_fmt        = tas5086_set_dai_fmt,
 760         .mute_stream    = tas5086_mute_stream,
 761 };
 762
 763 static struct snd_soc_dai_driver tas5086_dai = {
 764         .name = "tas5086-hifi",
 765         .playback = {
 766                 .stream_name    = "Playback",
 767                 .channels_min   = 2,
 768                 .channels_max   = 6,
 769                 .rates          = TAS5086_PCM_RATES,
 770                 .formats        = TAS5086_PCM_FORMATS,
 771         },
 772         .ops = &tas5086_dai_ops,
 773 };
 774
 775 #ifdef CONFIG_PM
 776 static int tas5086_soc_suspend(struct snd_soc_component *component)
 777 {
 778         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 779         int ret;
 780
 781         /* Shut down all channels */
 782         ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60);
 783         if (ret < 0)
 784                 return ret;
 785
 786         regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
 787
 788         return 0;
 789 }
 790
 791 static int tas5086_soc_resume(struct snd_soc_component *component)
 792 {
 793         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 794         int ret;
 795
 796         ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
 797         if (ret < 0)
 798                 return ret;
 799
 800         tas5086_reset(priv);
 801         regcache_mark_dirty(priv->regmap);
 802
 803         ret = tas5086_init(component->dev, priv);
 804         if (ret < 0)
 805                 return ret;
 806
 807         ret = regcache_sync(priv->regmap);
 808         if (ret < 0)
 809                 return ret;
 810
 811         return 0;
 812 }
 813 #else
 814 #define tas5086_soc_suspend     NULL
 815 #define tas5086_soc_resume      NULL
 816 #endif /* CONFIG_PM */
 817
 818 #ifdef CONFIG_OF
 819 static const struct of_device_id tas5086_dt_ids[] = {
 820         { .compatible = "ti,tas5086", },
 821         { }
 822 };
 823 MODULE_DEVICE_TABLE(of, tas5086_dt_ids);
 824 #endif
 825
 826 static int tas5086_probe(struct snd_soc_component *component)
 827 {
 828         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 829         int i, ret;
 830
 831         ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
 832         if (ret < 0) {
 833                 dev_err(component->dev, "Failed to enable regulators: %d\n", ret);
 834                 return ret;
 835         }
 836
 837         priv->pwm_start_mid_z = 0;
 838         priv->charge_period = 1300000; /* hardware default is 1300 ms */
 839
 840         if (of_match_device(of_match_ptr(tas5086_dt_ids), component->dev)) {
 841                 struct device_node *of_node = component->dev->of_node;
 842
 843                 of_property_read_u32(of_node, "ti,charge-period",
 844                                      &priv->charge_period);
 845
 846                 for (i = 0; i < 6; i++) {
 847                         char name[25];
 848
 849                         snprintf(name, sizeof(name),
 850                                  "ti,mid-z-channel-%d", i + 1);
 851
 852                         if (of_get_property(of_node, name, NULL) != NULL)
 853                                 priv->pwm_start_mid_z |= 1 << i;
 854                 }
 855         }
 856
 857         tas5086_reset(priv);
 858         ret = tas5086_init(component->dev, priv);
 859         if (ret < 0)
 860                 goto exit_disable_regulators;
 861
 862         /* set master volume to 0 dB */
 863         ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30);
 864         if (ret < 0)
 865                 goto exit_disable_regulators;
 866
 867         return 0;
 868
 869 exit_disable_regulators:
 870         regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
 871
 872         return ret;
 873 }
 874
 875 static void tas5086_remove(struct snd_soc_component *component)
 876 {
 877         struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
 878
 879         if (gpio_is_valid(priv->gpio_nreset))
 880                 /* Set codec to the reset state */
 881                 gpio_set_value(priv->gpio_nreset, 0);
 882
 883         regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
 884 };
 885
 886 static const struct snd_soc_component_driver soc_component_dev_tas5086 = {
 887         .probe                  = tas5086_probe,
 888         .remove                 = tas5086_remove,
 889         .suspend                = tas5086_soc_suspend,
 890         .resume                 = tas5086_soc_resume,
 891         .controls               = tas5086_controls,
 892         .num_controls           = ARRAY_SIZE(tas5086_controls),
 893         .dapm_widgets           = tas5086_dapm_widgets,
 894         .num_dapm_widgets       = ARRAY_SIZE(tas5086_dapm_widgets),
 895         .dapm_routes            = tas5086_dapm_routes,
 896         .num_dapm_routes        = ARRAY_SIZE(tas5086_dapm_routes),
 897         .idle_bias_on           = 1,
 898         .use_pmdown_time        = 1,
 899         .endianness             = 1,
 900         .non_legacy_dai_naming  = 1,
 901 };
 902
 903 static const struct i2c_device_id tas5086_i2c_id[] = {
 904         { "tas5086", 0 },
 905         { }
 906 };
 907 MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id);
 908
 909 static const struct regmap_config tas5086_regmap = {
 910         .reg_bits               = 8,
 911         .val_bits               = 32,
 912         .max_register           = TAS5086_MAX_REGISTER,
 913         .reg_defaults           = tas5086_reg_defaults,
 914         .num_reg_defaults       = ARRAY_SIZE(tas5086_reg_defaults),
 915         .cache_type             = REGCACHE_RBTREE,
 916         .volatile_reg           = tas5086_volatile_reg,
 917         .writeable_reg          = tas5086_writeable_reg,
 918         .readable_reg           = tas5086_accessible_reg,
 919         .reg_read               = tas5086_reg_read,
 920         .reg_write              = tas5086_reg_write,
 921 };
 922
 923 static int tas5086_i2c_probe(struct i2c_client *i2c,
 924                              const struct i2c_device_id *id)
 925 {
 926         struct tas5086_private *priv;
 927         struct device *dev = &i2c->dev;
 928         int gpio_nreset = -EINVAL;
 929         int i, ret;
 930
 931         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 932         if (!priv)
 933                 return -ENOMEM;
 934
 935         for (i = 0; i < ARRAY_SIZE(supply_names); i++)
 936                 priv->supplies[i].supply = supply_names[i];
 937
 938         ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
 939                                       priv->supplies);
 940         if (ret < 0) {
 941                 dev_err(dev, "Failed to get regulators: %d\n", ret);
 942                 return ret;
 943         }
 944
 945         priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap);
 946         if (IS_ERR(priv->regmap)) {
 947                 ret = PTR_ERR(priv->regmap);
 948                 dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
 949                 return ret;
 950         }
 951
 952         i2c_set_clientdata(i2c, priv);
 953
 954         if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) {
 955                 struct device_node *of_node = dev->of_node;
 956                 gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0);
 957         }
 958
 959         if (gpio_is_valid(gpio_nreset))
 960                 if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset"))
 961                         gpio_nreset = -EINVAL;
 962
 963         priv->gpio_nreset = gpio_nreset;
 964
 965         ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
 966         if (ret < 0) {
 967                 dev_err(dev, "Failed to enable regulators: %d\n", ret);
 968                 return ret;
 969         }
 970
 971         tas5086_reset(priv);
 972
 973         /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */
 974         ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i);
 975         if (ret == 0 && i != 0x3) {
 976                 dev_err(dev,
 977                         "Failed to identify TAS5086 codec (got %02x)\n", i);
 978                 ret = -ENODEV;
 979         }
 980
 981         /*
 982          * The chip has been identified, so we can turn off the power
 983          * again until the dai link is set up.
 984          */
 985         regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
 986
 987         if (ret == 0)
 988                 ret = devm_snd_soc_register_component(&i2c->dev,
 989                                              &soc_component_dev_tas5086,
 990                                              &tas5086_dai, 1);
 991
 992         return ret;
 993 }
 994
 995 static int tas5086_i2c_remove(struct i2c_client *i2c)
 996 {
 997         return 0;
 998 }
 999
1000 static struct i2c_driver tas5086_i2c_driver = {
1001         .driver = {
1002                 .name   = "tas5086",
1003                 .of_match_table = of_match_ptr(tas5086_dt_ids),
1004         },
1005         .id_table       = tas5086_i2c_id,
1006         .probe          = tas5086_i2c_probe,
1007         .remove         = tas5086_i2c_remove,
1008 };
1009
1010 module_i2c_driver(tas5086_i2c_driver);
1011
1012 MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>");
1013 MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver");
1014 MODULE_LICENSE("GPL");