ibmvnic: Move login to its own routine

[linux-2.6/btrfs-unstable.git] / include / drm / drm_atomic.h

/*
 * Copyright (C) 2014 Red Hat
 * Copyright (C) 2014 Intel Corp.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 * Rob Clark <robdclark@gmail.com>
 * Daniel Vetter <daniel.vetter@ffwll.ch>
 */

#ifndef DRM_ATOMIC_H_
#define DRM_ATOMIC_H_

#include <drm/drm_crtc.h>

/**
 * struct drm_crtc_commit - track modeset commits on a CRTC
 *
 * This structure is used to track pending modeset changes and atomic commit on
 * a per-CRTC basis. Since updating the list should never block this structure
 * is reference counted to allow waiters to safely wait on an event to complete,
 * without holding any locks.
 *
 * It has 3 different events in total to allow a fine-grained synchronization
 * between outstanding updates::
 *
 *      atomic commit thread                    hardware
 *
 *      write new state into hardware   ---->   ...
 *      signal hw_done
 *                                              switch to new state on next
 *      ...                                     v/hblank
 *
 *      wait for buffers to show up             ...
 *
 *      ...                                     send completion irq
 *                                              irq handler signals flip_done
 *      cleanup old buffers
 *
 *      signal cleanup_done
 *
 *      wait for flip_done              <----
 *      clean up atomic state
 *
 * The important bit to know is that cleanup_done is the terminal event, but the
 * ordering between flip_done and hw_done is entirely up to the specific driver
 * and modeset state change.
 *
 * For an implementation of how to use this look at
 * drm_atomic_helper_setup_commit() from the atomic helper library.
 */
struct drm_crtc_commit {
        /**
         * @crtc:
         *
         * DRM CRTC for this commit.
         */
        struct drm_crtc *crtc;

        /**
         * @ref:
         *
         * Reference count for this structure. Needed to allow blocking on
         * completions without the risk of the completion disappearing
         * meanwhile.
         */
        struct kref ref;

        /**
         * @flip_done:
         *
         * Will be signaled when the hardware has flipped to the new set of
         * buffers. Signals at the same time as when the drm event for this
         * commit is sent to userspace, or when an out-fence is singalled. Note
         * that for most hardware, in most cases this happens after @hw_done is
         * signalled.
         */
        struct completion flip_done;

        /**
         * @hw_done:
         *
         * Will be signalled when all hw register changes for this commit have
         * been written out. Especially when disabling a pipe this can be much
         * later than than @flip_done, since that can signal already when the
         * screen goes black, whereas to fully shut down a pipe more register
         * I/O is required.
         *
         * Note that this does not need to include separately reference-counted
         * resources like backing storage buffer pinning, or runtime pm
         * management.
         */
        struct completion hw_done;

        /**
         * @cleanup_done:
         *
         * Will be signalled after old buffers have been cleaned up by calling
         * drm_atomic_helper_cleanup_planes(). Since this can only happen after
         * a vblank wait completed it might be a bit later. This completion is
         * useful to throttle updates and avoid hardware updates getting ahead
         * of the buffer cleanup too much.
         */
        struct completion cleanup_done;

        /**
         * @commit_entry:
         *
         * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
         * $drm_crtc.commit_lock.
         */
        struct list_head commit_entry;

        /**
         * @event:
         *
         * &drm_pending_vblank_event pointer to clean up private events.
         */
        struct drm_pending_vblank_event *event;
};

struct __drm_planes_state {
        struct drm_plane *ptr;
        struct drm_plane_state *state;
};

struct __drm_crtcs_state {
        struct drm_crtc *ptr;
        struct drm_crtc_state *state;
        struct drm_crtc_commit *commit;
        s32 __user *out_fence_ptr;
        unsigned last_vblank_count;
};

struct __drm_connnectors_state {
        struct drm_connector *ptr;
        struct drm_connector_state *state;
};

/**
 * struct drm_atomic_state - the global state object for atomic updates
 * @ref: count of all references to this state (will not be freed until zero)
 * @dev: parent DRM device
 * @allow_modeset: allow full modeset
 * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics
 * @legacy_set_config: Disable conflicting encoders instead of failing with -EINVAL.
 * @planes: pointer to array of structures with per-plane data
 * @crtcs: pointer to array of CRTC pointers
 * @num_connector: size of the @connectors and @connector_states arrays
 * @connectors: pointer to array of structures with per-connector data
 * @acquire_ctx: acquire context for this atomic modeset state update
 */
struct drm_atomic_state {
        struct kref ref;

        struct drm_device *dev;
        bool allow_modeset : 1;
        bool legacy_cursor_update : 1;
        bool legacy_set_config : 1;
        struct __drm_planes_state *planes;
        struct __drm_crtcs_state *crtcs;
        int num_connector;
        struct __drm_connnectors_state *connectors;

        struct drm_modeset_acquire_ctx *acquire_ctx;

        /**
         * @commit_work:
         *
         * Work item which can be used by the driver or helpers to execute the
         * commit without blocking.
         */
        struct work_struct commit_work;
};

void __drm_crtc_commit_free(struct kref *kref);

/**
 * drm_crtc_commit_get - acquire a reference to the CRTC commit
 * @commit: CRTC commit
 *
 * Increases the reference of @commit.
 */
static inline void drm_crtc_commit_get(struct drm_crtc_commit *commit)
{
        kref_get(&commit->ref);
}

/**
 * drm_crtc_commit_put - release a reference to the CRTC commmit
 * @commit: CRTC commit
 *
 * This releases a reference to @commit which is freed after removing the
 * final reference. No locking required and callable from any context.
 */
static inline void drm_crtc_commit_put(struct drm_crtc_commit *commit)
{
        kref_put(&commit->ref, __drm_crtc_commit_free);
}

struct drm_atomic_state * __must_check
drm_atomic_state_alloc(struct drm_device *dev);
void drm_atomic_state_clear(struct drm_atomic_state *state);

/**
 * drm_atomic_state_get - acquire a reference to the atomic state
 * @state: The atomic state
 *
 * Returns a new reference to the @state
 */
static inline struct drm_atomic_state *
drm_atomic_state_get(struct drm_atomic_state *state)
{
        kref_get(&state->ref);
        return state;
}

void __drm_atomic_state_free(struct kref *ref);

/**
 * drm_atomic_state_put - release a reference to the atomic state
 * @state: The atomic state
 *
 * This releases a reference to @state which is freed after removing the
 * final reference. No locking required and callable from any context.
 */
static inline void drm_atomic_state_put(struct drm_atomic_state *state)
{
        kref_put(&state->ref, __drm_atomic_state_free);
}

int  __must_check
drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state);
void drm_atomic_state_default_clear(struct drm_atomic_state *state);
void drm_atomic_state_default_release(struct drm_atomic_state *state);

struct drm_crtc_state * __must_check
drm_atomic_get_crtc_state(struct drm_atomic_state *state,
                          struct drm_crtc *crtc);
int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
                struct drm_crtc_state *state, struct drm_property *property,
                uint64_t val);
struct drm_plane_state * __must_check
drm_atomic_get_plane_state(struct drm_atomic_state *state,
                           struct drm_plane *plane);
int drm_atomic_plane_set_property(struct drm_plane *plane,
                struct drm_plane_state *state, struct drm_property *property,
                uint64_t val);
struct drm_connector_state * __must_check
drm_atomic_get_connector_state(struct drm_atomic_state *state,
                               struct drm_connector *connector);
int drm_atomic_connector_set_property(struct drm_connector *connector,
                struct drm_connector_state *state, struct drm_property *property,
                uint64_t val);

/**
 * drm_atomic_get_existing_crtc_state - get crtc state, if it exists
 * @state: global atomic state object
 * @crtc: crtc to grab
 *
 * This function returns the crtc state for the given crtc, or NULL
 * if the crtc is not part of the global atomic state.
 */
static inline struct drm_crtc_state *
drm_atomic_get_existing_crtc_state(struct drm_atomic_state *state,
                                   struct drm_crtc *crtc)
{
        return state->crtcs[drm_crtc_index(crtc)].state;
}

/**
 * drm_atomic_get_existing_plane_state - get plane state, if it exists
 * @state: global atomic state object
 * @plane: plane to grab
 *
 * This function returns the plane state for the given plane, or NULL
 * if the plane is not part of the global atomic state.
 */
static inline struct drm_plane_state *
drm_atomic_get_existing_plane_state(struct drm_atomic_state *state,
                                    struct drm_plane *plane)
{
        return state->planes[drm_plane_index(plane)].state;
}

/**
 * drm_atomic_get_existing_connector_state - get connector state, if it exists
 * @state: global atomic state object
 * @connector: connector to grab
 *
 * This function returns the connector state for the given connector,
 * or NULL if the connector is not part of the global atomic state.
 */
static inline struct drm_connector_state *
drm_atomic_get_existing_connector_state(struct drm_atomic_state *state,
                                        struct drm_connector *connector)
{
        int index = drm_connector_index(connector);

        if (index >= state->num_connector)
                return NULL;

        return state->connectors[index].state;
}

/**
 * __drm_atomic_get_current_plane_state - get current plane state
 * @state: global atomic state object
 * @plane: plane to grab
 *
 * This function returns the plane state for the given plane, either from
 * @state, or if the plane isn't part of the atomic state update, from @plane.
 * This is useful in atomic check callbacks, when drivers need to peek at, but
 * not change, state of other planes, since it avoids threading an error code
 * back up the call chain.
 *
 * WARNING:
 *
 * Note that this function is in general unsafe since it doesn't check for the
 * required locking for access state structures. Drivers must ensure that it is
 * safe to access the returned state structure through other means. One common
 * example is when planes are fixed to a single CRTC, and the driver knows that
 * the CRTC lock is held already. In that case holding the CRTC lock gives a
 * read-lock on all planes connected to that CRTC. But if planes can be
 * reassigned things get more tricky. In that case it's better to use
 * drm_atomic_get_plane_state and wire up full error handling.
 *
 * Returns:
 *
 * Read-only pointer to the current plane state.
 */
static inline const struct drm_plane_state *
__drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
                                     struct drm_plane *plane)
{
        if (state->planes[drm_plane_index(plane)].state)
                return state->planes[drm_plane_index(plane)].state;

        return plane->state;
}

int __must_check
drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state,
                             struct drm_display_mode *mode);
int __must_check
drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state,
                                  struct drm_property_blob *blob);
int __must_check
drm_atomic_set_crtc_for_plane(struct drm_plane_state *plane_state,
                              struct drm_crtc *crtc);
void drm_atomic_set_fb_for_plane(struct drm_plane_state *plane_state,
                                 struct drm_framebuffer *fb);
void drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state,
                                    struct dma_fence *fence);
int __must_check
drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
                                  struct drm_crtc *crtc);
int __must_check
drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
                                   struct drm_crtc *crtc);
int __must_check
drm_atomic_add_affected_planes(struct drm_atomic_state *state,
                               struct drm_crtc *crtc);

void drm_atomic_legacy_backoff(struct drm_atomic_state *state);

void
drm_atomic_clean_old_fb(struct drm_device *dev, unsigned plane_mask, int ret);

int __must_check drm_atomic_check_only(struct drm_atomic_state *state);
int __must_check drm_atomic_commit(struct drm_atomic_state *state);
int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state);

void drm_state_dump(struct drm_device *dev, struct drm_printer *p);

#define for_each_connector_in_state(__state, connector, connector_state, __i) \
        for ((__i) = 0;                                                 \
             (__i) < (__state)->num_connector &&                                \
             ((connector) = (__state)->connectors[__i].ptr,                     \
             (connector_state) = (__state)->connectors[__i].state, 1);  \
             (__i)++)                                                   \
                for_each_if (connector)

#define for_each_crtc_in_state(__state, crtc, crtc_state, __i)  \
        for ((__i) = 0;                                         \
             (__i) < (__state)->dev->mode_config.num_crtc &&    \
             ((crtc) = (__state)->crtcs[__i].ptr,                       \
             (crtc_state) = (__state)->crtcs[__i].state, 1);    \
             (__i)++)                                           \
                for_each_if (crtc_state)

#define for_each_plane_in_state(__state, plane, plane_state, __i)               \
        for ((__i) = 0;                                                 \
             (__i) < (__state)->dev->mode_config.num_total_plane &&     \
             ((plane) = (__state)->planes[__i].ptr,                             \
             (plane_state) = (__state)->planes[__i].state, 1);          \
             (__i)++)                                                   \
                for_each_if (plane_state)

/**
 * drm_atomic_crtc_needs_modeset - compute combined modeset need
 * @state: &drm_crtc_state for the CRTC
 *
 * To give drivers flexibility &struct drm_crtc_state has 3 booleans to track
 * whether the state CRTC changed enough to need a full modeset cycle:
 * connectors_changed, mode_changed and active_changed. This helper simply
 * combines these three to compute the overall need for a modeset for @state.
 *
 * The atomic helper code sets these booleans, but drivers can and should
 * change them appropriately to accurately represent whether a modeset is
 * really needed. In general, drivers should avoid full modesets whenever
 * possible.
 *
 * For example if the CRTC mode has changed, and the hardware is able to enact
 * the requested mode change without going through a full modeset, the driver
 * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
 * implementation.
 */
static inline bool
drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
{
        return state->mode_changed || state->active_changed ||
               state->connectors_changed;
}

#endif /* DRM_ATOMIC_H_ */