Linux 4.19-rc7
[linux-2.6/btrfs-unstable.git] / drivers / regulator / ab8500.c
blob83dba3fbfe0cfcded4d3f8624bd59030ca08dcfa
1 /*
2 * Copyright (C) ST-Ericsson SA 2010
4 * License Terms: GNU General Public License v2
6 * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
7 * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
8 * Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
10 * AB8500 peripheral regulators
12 * AB8500 supports the following regulators:
13 * VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
15 * AB8505 supports the following regulators:
16 * VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
18 #include <linux/init.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/err.h>
22 #include <linux/platform_device.h>
23 #include <linux/mfd/abx500.h>
24 #include <linux/mfd/abx500/ab8500.h>
25 #include <linux/of.h>
26 #include <linux/regulator/of_regulator.h>
27 #include <linux/regulator/driver.h>
28 #include <linux/regulator/machine.h>
29 #include <linux/regulator/ab8500.h>
30 #include <linux/slab.h>
32 /**
33 * struct ab8500_shared_mode - is used when mode is shared between
34 * two regulators.
35 * @shared_regulator: pointer to the other sharing regulator
36 * @lp_mode_req: low power mode requested by this regulator
38 struct ab8500_shared_mode {
39 struct ab8500_regulator_info *shared_regulator;
40 bool lp_mode_req;
43 /**
44 * struct ab8500_regulator_info - ab8500 regulator information
45 * @dev: device pointer
46 * @desc: regulator description
47 * @regulator_dev: regulator device
48 * @shared_mode: used when mode is shared between two regulators
49 * @load_lp_uA: maximum load in idle (low power) mode
50 * @update_bank: bank to control on/off
51 * @update_reg: register to control on/off
52 * @update_mask: mask to enable/disable and set mode of regulator
53 * @update_val: bits holding the regulator current mode
54 * @update_val_idle: bits to enable the regulator in idle (low power) mode
55 * @update_val_normal: bits to enable the regulator in normal (high power) mode
56 * @mode_bank: bank with location of mode register
57 * @mode_reg: mode register
58 * @mode_mask: mask for setting mode
59 * @mode_val_idle: mode setting for low power
60 * @mode_val_normal: mode setting for normal power
61 * @voltage_bank: bank to control regulator voltage
62 * @voltage_reg: register to control regulator voltage
63 * @voltage_mask: mask to control regulator voltage
65 struct ab8500_regulator_info {
66 struct device *dev;
67 struct regulator_desc desc;
68 struct regulator_dev *regulator;
69 struct ab8500_shared_mode *shared_mode;
70 int load_lp_uA;
71 u8 update_bank;
72 u8 update_reg;
73 u8 update_mask;
74 u8 update_val;
75 u8 update_val_idle;
76 u8 update_val_normal;
77 u8 mode_bank;
78 u8 mode_reg;
79 u8 mode_mask;
80 u8 mode_val_idle;
81 u8 mode_val_normal;
82 u8 voltage_bank;
83 u8 voltage_reg;
84 u8 voltage_mask;
85 struct {
86 u8 voltage_limit;
87 u8 voltage_bank;
88 u8 voltage_reg;
89 u8 voltage_mask;
90 } expand_register;
93 /* voltage tables for the vauxn/vintcore supplies */
94 static const unsigned int ldo_vauxn_voltages[] = {
95 1100000,
96 1200000,
97 1300000,
98 1400000,
99 1500000,
100 1800000,
101 1850000,
102 1900000,
103 2500000,
104 2650000,
105 2700000,
106 2750000,
107 2800000,
108 2900000,
109 3000000,
110 3300000,
113 static const unsigned int ldo_vaux3_voltages[] = {
114 1200000,
115 1500000,
116 1800000,
117 2100000,
118 2500000,
119 2750000,
120 2790000,
121 2910000,
124 static const unsigned int ldo_vaux56_voltages[] = {
125 1800000,
126 1050000,
127 1100000,
128 1200000,
129 1500000,
130 2200000,
131 2500000,
132 2790000,
135 static const unsigned int ldo_vintcore_voltages[] = {
136 1200000,
137 1225000,
138 1250000,
139 1275000,
140 1300000,
141 1325000,
142 1350000,
145 static const unsigned int ldo_sdio_voltages[] = {
146 1160000,
147 1050000,
148 1100000,
149 1500000,
150 1800000,
151 2200000,
152 2910000,
153 3050000,
156 static const unsigned int fixed_1200000_voltage[] = {
157 1200000,
160 static const unsigned int fixed_1800000_voltage[] = {
161 1800000,
164 static const unsigned int fixed_2000000_voltage[] = {
165 2000000,
168 static const unsigned int fixed_2050000_voltage[] = {
169 2050000,
172 static const unsigned int fixed_3300000_voltage[] = {
173 3300000,
176 static const unsigned int ldo_vana_voltages[] = {
177 1050000,
178 1075000,
179 1100000,
180 1125000,
181 1150000,
182 1175000,
183 1200000,
184 1225000,
187 static const unsigned int ldo_vaudio_voltages[] = {
188 2000000,
189 2100000,
190 2200000,
191 2300000,
192 2400000,
193 2500000,
194 2600000,
195 2600000, /* Duplicated in Vaudio and IsoUicc Control register. */
198 static const unsigned int ldo_vdmic_voltages[] = {
199 1800000,
200 1900000,
201 2000000,
202 2850000,
205 static DEFINE_MUTEX(shared_mode_mutex);
206 static struct ab8500_shared_mode ldo_anamic1_shared;
207 static struct ab8500_shared_mode ldo_anamic2_shared;
209 static int ab8500_regulator_enable(struct regulator_dev *rdev)
211 int ret;
212 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
214 if (info == NULL) {
215 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
216 return -EINVAL;
219 ret = abx500_mask_and_set_register_interruptible(info->dev,
220 info->update_bank, info->update_reg,
221 info->update_mask, info->update_val);
222 if (ret < 0) {
223 dev_err(rdev_get_dev(rdev),
224 "couldn't set enable bits for regulator\n");
225 return ret;
228 dev_vdbg(rdev_get_dev(rdev),
229 "%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
230 info->desc.name, info->update_bank, info->update_reg,
231 info->update_mask, info->update_val);
233 return ret;
236 static int ab8500_regulator_disable(struct regulator_dev *rdev)
238 int ret;
239 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
241 if (info == NULL) {
242 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
243 return -EINVAL;
246 ret = abx500_mask_and_set_register_interruptible(info->dev,
247 info->update_bank, info->update_reg,
248 info->update_mask, 0x0);
249 if (ret < 0) {
250 dev_err(rdev_get_dev(rdev),
251 "couldn't set disable bits for regulator\n");
252 return ret;
255 dev_vdbg(rdev_get_dev(rdev),
256 "%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
257 info->desc.name, info->update_bank, info->update_reg,
258 info->update_mask, 0x0);
260 return ret;
263 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
265 int ret;
266 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
267 u8 regval;
269 if (info == NULL) {
270 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
271 return -EINVAL;
274 ret = abx500_get_register_interruptible(info->dev,
275 info->update_bank, info->update_reg, &regval);
276 if (ret < 0) {
277 dev_err(rdev_get_dev(rdev),
278 "couldn't read 0x%x register\n", info->update_reg);
279 return ret;
282 dev_vdbg(rdev_get_dev(rdev),
283 "%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
284 " 0x%x\n",
285 info->desc.name, info->update_bank, info->update_reg,
286 info->update_mask, regval);
288 if (regval & info->update_mask)
289 return 1;
290 else
291 return 0;
294 static unsigned int ab8500_regulator_get_optimum_mode(
295 struct regulator_dev *rdev, int input_uV,
296 int output_uV, int load_uA)
298 unsigned int mode;
300 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
302 if (info == NULL) {
303 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
304 return -EINVAL;
307 if (load_uA <= info->load_lp_uA)
308 mode = REGULATOR_MODE_IDLE;
309 else
310 mode = REGULATOR_MODE_NORMAL;
312 return mode;
315 static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
316 unsigned int mode)
318 int ret = 0;
319 u8 bank, reg, mask, val;
320 bool lp_mode_req = false;
321 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
323 if (info == NULL) {
324 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
325 return -EINVAL;
328 if (info->mode_mask) {
329 bank = info->mode_bank;
330 reg = info->mode_reg;
331 mask = info->mode_mask;
332 } else {
333 bank = info->update_bank;
334 reg = info->update_reg;
335 mask = info->update_mask;
338 if (info->shared_mode)
339 mutex_lock(&shared_mode_mutex);
341 switch (mode) {
342 case REGULATOR_MODE_NORMAL:
343 if (info->shared_mode)
344 lp_mode_req = false;
346 if (info->mode_mask)
347 val = info->mode_val_normal;
348 else
349 val = info->update_val_normal;
350 break;
351 case REGULATOR_MODE_IDLE:
352 if (info->shared_mode) {
353 struct ab8500_regulator_info *shared_regulator;
355 shared_regulator = info->shared_mode->shared_regulator;
356 if (!shared_regulator->shared_mode->lp_mode_req) {
357 /* Other regulator prevent LP mode */
358 info->shared_mode->lp_mode_req = true;
359 goto out_unlock;
362 lp_mode_req = true;
365 if (info->mode_mask)
366 val = info->mode_val_idle;
367 else
368 val = info->update_val_idle;
369 break;
370 default:
371 ret = -EINVAL;
372 goto out_unlock;
375 if (info->mode_mask || ab8500_regulator_is_enabled(rdev)) {
376 ret = abx500_mask_and_set_register_interruptible(info->dev,
377 bank, reg, mask, val);
378 if (ret < 0) {
379 dev_err(rdev_get_dev(rdev),
380 "couldn't set regulator mode\n");
381 goto out_unlock;
384 dev_vdbg(rdev_get_dev(rdev),
385 "%s-set_mode (bank, reg, mask, value): "
386 "0x%x, 0x%x, 0x%x, 0x%x\n",
387 info->desc.name, bank, reg,
388 mask, val);
391 if (!info->mode_mask)
392 info->update_val = val;
394 if (info->shared_mode)
395 info->shared_mode->lp_mode_req = lp_mode_req;
397 out_unlock:
398 if (info->shared_mode)
399 mutex_unlock(&shared_mode_mutex);
401 return ret;
404 static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
406 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
407 int ret;
408 u8 val;
409 u8 val_normal;
410 u8 val_idle;
412 if (info == NULL) {
413 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
414 return -EINVAL;
417 /* Need special handling for shared mode */
418 if (info->shared_mode) {
419 if (info->shared_mode->lp_mode_req)
420 return REGULATOR_MODE_IDLE;
421 else
422 return REGULATOR_MODE_NORMAL;
425 if (info->mode_mask) {
426 /* Dedicated register for handling mode */
427 ret = abx500_get_register_interruptible(info->dev,
428 info->mode_bank, info->mode_reg, &val);
429 val = val & info->mode_mask;
431 val_normal = info->mode_val_normal;
432 val_idle = info->mode_val_idle;
433 } else {
434 /* Mode register same as enable register */
435 val = info->update_val;
436 val_normal = info->update_val_normal;
437 val_idle = info->update_val_idle;
440 if (val == val_normal)
441 ret = REGULATOR_MODE_NORMAL;
442 else if (val == val_idle)
443 ret = REGULATOR_MODE_IDLE;
444 else
445 ret = -EINVAL;
447 return ret;
450 static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
452 int ret, voltage_shift;
453 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
454 u8 regval;
456 if (info == NULL) {
457 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
458 return -EINVAL;
461 voltage_shift = ffs(info->voltage_mask) - 1;
463 ret = abx500_get_register_interruptible(info->dev,
464 info->voltage_bank, info->voltage_reg, &regval);
465 if (ret < 0) {
466 dev_err(rdev_get_dev(rdev),
467 "couldn't read voltage reg for regulator\n");
468 return ret;
471 dev_vdbg(rdev_get_dev(rdev),
472 "%s-get_voltage (bank, reg, mask, shift, value): "
473 "0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
474 info->desc.name, info->voltage_bank,
475 info->voltage_reg, info->voltage_mask,
476 voltage_shift, regval);
478 return (regval & info->voltage_mask) >> voltage_shift;
481 static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
482 unsigned selector)
484 int ret, voltage_shift;
485 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
486 u8 regval;
488 if (info == NULL) {
489 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
490 return -EINVAL;
493 voltage_shift = ffs(info->voltage_mask) - 1;
495 /* set the registers for the request */
496 regval = (u8)selector << voltage_shift;
497 ret = abx500_mask_and_set_register_interruptible(info->dev,
498 info->voltage_bank, info->voltage_reg,
499 info->voltage_mask, regval);
500 if (ret < 0)
501 dev_err(rdev_get_dev(rdev),
502 "couldn't set voltage reg for regulator\n");
504 dev_vdbg(rdev_get_dev(rdev),
505 "%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
506 " 0x%x\n",
507 info->desc.name, info->voltage_bank, info->voltage_reg,
508 info->voltage_mask, regval);
510 return ret;
513 static struct regulator_ops ab8500_regulator_volt_mode_ops = {
514 .enable = ab8500_regulator_enable,
515 .disable = ab8500_regulator_disable,
516 .is_enabled = ab8500_regulator_is_enabled,
517 .get_optimum_mode = ab8500_regulator_get_optimum_mode,
518 .set_mode = ab8500_regulator_set_mode,
519 .get_mode = ab8500_regulator_get_mode,
520 .get_voltage_sel = ab8500_regulator_get_voltage_sel,
521 .set_voltage_sel = ab8500_regulator_set_voltage_sel,
522 .list_voltage = regulator_list_voltage_table,
525 static struct regulator_ops ab8500_regulator_volt_ops = {
526 .enable = ab8500_regulator_enable,
527 .disable = ab8500_regulator_disable,
528 .is_enabled = ab8500_regulator_is_enabled,
529 .get_voltage_sel = ab8500_regulator_get_voltage_sel,
530 .set_voltage_sel = ab8500_regulator_set_voltage_sel,
531 .list_voltage = regulator_list_voltage_table,
534 static struct regulator_ops ab8500_regulator_mode_ops = {
535 .enable = ab8500_regulator_enable,
536 .disable = ab8500_regulator_disable,
537 .is_enabled = ab8500_regulator_is_enabled,
538 .get_optimum_mode = ab8500_regulator_get_optimum_mode,
539 .set_mode = ab8500_regulator_set_mode,
540 .get_mode = ab8500_regulator_get_mode,
541 .list_voltage = regulator_list_voltage_table,
544 static struct regulator_ops ab8500_regulator_ops = {
545 .enable = ab8500_regulator_enable,
546 .disable = ab8500_regulator_disable,
547 .is_enabled = ab8500_regulator_is_enabled,
548 .list_voltage = regulator_list_voltage_table,
551 static struct regulator_ops ab8500_regulator_anamic_mode_ops = {
552 .enable = ab8500_regulator_enable,
553 .disable = ab8500_regulator_disable,
554 .is_enabled = ab8500_regulator_is_enabled,
555 .set_mode = ab8500_regulator_set_mode,
556 .get_mode = ab8500_regulator_get_mode,
557 .list_voltage = regulator_list_voltage_table,
560 /* AB8500 regulator information */
561 static struct ab8500_regulator_info
562 ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
564 * Variable Voltage Regulators
565 * name, min mV, max mV,
566 * update bank, reg, mask, enable val
567 * volt bank, reg, mask
569 [AB8500_LDO_AUX1] = {
570 .desc = {
571 .name = "LDO-AUX1",
572 .ops = &ab8500_regulator_volt_mode_ops,
573 .type = REGULATOR_VOLTAGE,
574 .id = AB8500_LDO_AUX1,
575 .owner = THIS_MODULE,
576 .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
577 .volt_table = ldo_vauxn_voltages,
578 .enable_time = 200,
579 .supply_name = "vin",
581 .load_lp_uA = 5000,
582 .update_bank = 0x04,
583 .update_reg = 0x09,
584 .update_mask = 0x03,
585 .update_val = 0x01,
586 .update_val_idle = 0x03,
587 .update_val_normal = 0x01,
588 .voltage_bank = 0x04,
589 .voltage_reg = 0x1f,
590 .voltage_mask = 0x0f,
592 [AB8500_LDO_AUX2] = {
593 .desc = {
594 .name = "LDO-AUX2",
595 .ops = &ab8500_regulator_volt_mode_ops,
596 .type = REGULATOR_VOLTAGE,
597 .id = AB8500_LDO_AUX2,
598 .owner = THIS_MODULE,
599 .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
600 .volt_table = ldo_vauxn_voltages,
601 .enable_time = 200,
602 .supply_name = "vin",
604 .load_lp_uA = 5000,
605 .update_bank = 0x04,
606 .update_reg = 0x09,
607 .update_mask = 0x0c,
608 .update_val = 0x04,
609 .update_val_idle = 0x0c,
610 .update_val_normal = 0x04,
611 .voltage_bank = 0x04,
612 .voltage_reg = 0x20,
613 .voltage_mask = 0x0f,
615 [AB8500_LDO_AUX3] = {
616 .desc = {
617 .name = "LDO-AUX3",
618 .ops = &ab8500_regulator_volt_mode_ops,
619 .type = REGULATOR_VOLTAGE,
620 .id = AB8500_LDO_AUX3,
621 .owner = THIS_MODULE,
622 .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
623 .volt_table = ldo_vaux3_voltages,
624 .enable_time = 450,
625 .supply_name = "vin",
627 .load_lp_uA = 5000,
628 .update_bank = 0x04,
629 .update_reg = 0x0a,
630 .update_mask = 0x03,
631 .update_val = 0x01,
632 .update_val_idle = 0x03,
633 .update_val_normal = 0x01,
634 .voltage_bank = 0x04,
635 .voltage_reg = 0x21,
636 .voltage_mask = 0x07,
638 [AB8500_LDO_INTCORE] = {
639 .desc = {
640 .name = "LDO-INTCORE",
641 .ops = &ab8500_regulator_volt_mode_ops,
642 .type = REGULATOR_VOLTAGE,
643 .id = AB8500_LDO_INTCORE,
644 .owner = THIS_MODULE,
645 .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
646 .volt_table = ldo_vintcore_voltages,
647 .enable_time = 750,
649 .load_lp_uA = 5000,
650 .update_bank = 0x03,
651 .update_reg = 0x80,
652 .update_mask = 0x44,
653 .update_val = 0x44,
654 .update_val_idle = 0x44,
655 .update_val_normal = 0x04,
656 .voltage_bank = 0x03,
657 .voltage_reg = 0x80,
658 .voltage_mask = 0x38,
662 * Fixed Voltage Regulators
663 * name, fixed mV,
664 * update bank, reg, mask, enable val
666 [AB8500_LDO_TVOUT] = {
667 .desc = {
668 .name = "LDO-TVOUT",
669 .ops = &ab8500_regulator_mode_ops,
670 .type = REGULATOR_VOLTAGE,
671 .id = AB8500_LDO_TVOUT,
672 .owner = THIS_MODULE,
673 .n_voltages = 1,
674 .volt_table = fixed_2000000_voltage,
675 .enable_time = 500,
677 .load_lp_uA = 1000,
678 .update_bank = 0x03,
679 .update_reg = 0x80,
680 .update_mask = 0x82,
681 .update_val = 0x02,
682 .update_val_idle = 0x82,
683 .update_val_normal = 0x02,
685 [AB8500_LDO_AUDIO] = {
686 .desc = {
687 .name = "LDO-AUDIO",
688 .ops = &ab8500_regulator_ops,
689 .type = REGULATOR_VOLTAGE,
690 .id = AB8500_LDO_AUDIO,
691 .owner = THIS_MODULE,
692 .n_voltages = 1,
693 .enable_time = 140,
694 .volt_table = fixed_2000000_voltage,
696 .update_bank = 0x03,
697 .update_reg = 0x83,
698 .update_mask = 0x02,
699 .update_val = 0x02,
701 [AB8500_LDO_ANAMIC1] = {
702 .desc = {
703 .name = "LDO-ANAMIC1",
704 .ops = &ab8500_regulator_ops,
705 .type = REGULATOR_VOLTAGE,
706 .id = AB8500_LDO_ANAMIC1,
707 .owner = THIS_MODULE,
708 .n_voltages = 1,
709 .enable_time = 500,
710 .volt_table = fixed_2050000_voltage,
712 .update_bank = 0x03,
713 .update_reg = 0x83,
714 .update_mask = 0x08,
715 .update_val = 0x08,
717 [AB8500_LDO_ANAMIC2] = {
718 .desc = {
719 .name = "LDO-ANAMIC2",
720 .ops = &ab8500_regulator_ops,
721 .type = REGULATOR_VOLTAGE,
722 .id = AB8500_LDO_ANAMIC2,
723 .owner = THIS_MODULE,
724 .n_voltages = 1,
725 .enable_time = 500,
726 .volt_table = fixed_2050000_voltage,
728 .update_bank = 0x03,
729 .update_reg = 0x83,
730 .update_mask = 0x10,
731 .update_val = 0x10,
733 [AB8500_LDO_DMIC] = {
734 .desc = {
735 .name = "LDO-DMIC",
736 .ops = &ab8500_regulator_ops,
737 .type = REGULATOR_VOLTAGE,
738 .id = AB8500_LDO_DMIC,
739 .owner = THIS_MODULE,
740 .n_voltages = 1,
741 .enable_time = 420,
742 .volt_table = fixed_1800000_voltage,
744 .update_bank = 0x03,
745 .update_reg = 0x83,
746 .update_mask = 0x04,
747 .update_val = 0x04,
751 * Regulators with fixed voltage and normal/idle modes
753 [AB8500_LDO_ANA] = {
754 .desc = {
755 .name = "LDO-ANA",
756 .ops = &ab8500_regulator_mode_ops,
757 .type = REGULATOR_VOLTAGE,
758 .id = AB8500_LDO_ANA,
759 .owner = THIS_MODULE,
760 .n_voltages = 1,
761 .enable_time = 140,
762 .volt_table = fixed_1200000_voltage,
764 .load_lp_uA = 1000,
765 .update_bank = 0x04,
766 .update_reg = 0x06,
767 .update_mask = 0x0c,
768 .update_val = 0x04,
769 .update_val_idle = 0x0c,
770 .update_val_normal = 0x04,
774 /* AB8505 regulator information */
775 static struct ab8500_regulator_info
776 ab8505_regulator_info[AB8505_NUM_REGULATORS] = {
778 * Variable Voltage Regulators
779 * name, min mV, max mV,
780 * update bank, reg, mask, enable val
781 * volt bank, reg, mask
783 [AB8505_LDO_AUX1] = {
784 .desc = {
785 .name = "LDO-AUX1",
786 .ops = &ab8500_regulator_volt_mode_ops,
787 .type = REGULATOR_VOLTAGE,
788 .id = AB8505_LDO_AUX1,
789 .owner = THIS_MODULE,
790 .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
791 .volt_table = ldo_vauxn_voltages,
793 .load_lp_uA = 5000,
794 .update_bank = 0x04,
795 .update_reg = 0x09,
796 .update_mask = 0x03,
797 .update_val = 0x01,
798 .update_val_idle = 0x03,
799 .update_val_normal = 0x01,
800 .voltage_bank = 0x04,
801 .voltage_reg = 0x1f,
802 .voltage_mask = 0x0f,
804 [AB8505_LDO_AUX2] = {
805 .desc = {
806 .name = "LDO-AUX2",
807 .ops = &ab8500_regulator_volt_mode_ops,
808 .type = REGULATOR_VOLTAGE,
809 .id = AB8505_LDO_AUX2,
810 .owner = THIS_MODULE,
811 .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
812 .volt_table = ldo_vauxn_voltages,
814 .load_lp_uA = 5000,
815 .update_bank = 0x04,
816 .update_reg = 0x09,
817 .update_mask = 0x0c,
818 .update_val = 0x04,
819 .update_val_idle = 0x0c,
820 .update_val_normal = 0x04,
821 .voltage_bank = 0x04,
822 .voltage_reg = 0x20,
823 .voltage_mask = 0x0f,
825 [AB8505_LDO_AUX3] = {
826 .desc = {
827 .name = "LDO-AUX3",
828 .ops = &ab8500_regulator_volt_mode_ops,
829 .type = REGULATOR_VOLTAGE,
830 .id = AB8505_LDO_AUX3,
831 .owner = THIS_MODULE,
832 .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
833 .volt_table = ldo_vaux3_voltages,
835 .load_lp_uA = 5000,
836 .update_bank = 0x04,
837 .update_reg = 0x0a,
838 .update_mask = 0x03,
839 .update_val = 0x01,
840 .update_val_idle = 0x03,
841 .update_val_normal = 0x01,
842 .voltage_bank = 0x04,
843 .voltage_reg = 0x21,
844 .voltage_mask = 0x07,
846 [AB8505_LDO_AUX4] = {
847 .desc = {
848 .name = "LDO-AUX4",
849 .ops = &ab8500_regulator_volt_mode_ops,
850 .type = REGULATOR_VOLTAGE,
851 .id = AB8505_LDO_AUX4,
852 .owner = THIS_MODULE,
853 .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
854 .volt_table = ldo_vauxn_voltages,
856 .load_lp_uA = 5000,
857 /* values for Vaux4Regu register */
858 .update_bank = 0x04,
859 .update_reg = 0x2e,
860 .update_mask = 0x03,
861 .update_val = 0x01,
862 .update_val_idle = 0x03,
863 .update_val_normal = 0x01,
864 /* values for Vaux4SEL register */
865 .voltage_bank = 0x04,
866 .voltage_reg = 0x2f,
867 .voltage_mask = 0x0f,
869 [AB8505_LDO_AUX5] = {
870 .desc = {
871 .name = "LDO-AUX5",
872 .ops = &ab8500_regulator_volt_mode_ops,
873 .type = REGULATOR_VOLTAGE,
874 .id = AB8505_LDO_AUX5,
875 .owner = THIS_MODULE,
876 .n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
877 .volt_table = ldo_vaux56_voltages,
879 .load_lp_uA = 2000,
880 /* values for CtrlVaux5 register */
881 .update_bank = 0x01,
882 .update_reg = 0x55,
883 .update_mask = 0x18,
884 .update_val = 0x10,
885 .update_val_idle = 0x18,
886 .update_val_normal = 0x10,
887 .voltage_bank = 0x01,
888 .voltage_reg = 0x55,
889 .voltage_mask = 0x07,
891 [AB8505_LDO_AUX6] = {
892 .desc = {
893 .name = "LDO-AUX6",
894 .ops = &ab8500_regulator_volt_mode_ops,
895 .type = REGULATOR_VOLTAGE,
896 .id = AB8505_LDO_AUX6,
897 .owner = THIS_MODULE,
898 .n_voltages = ARRAY_SIZE(ldo_vaux56_voltages),
899 .volt_table = ldo_vaux56_voltages,
901 .load_lp_uA = 2000,
902 /* values for CtrlVaux6 register */
903 .update_bank = 0x01,
904 .update_reg = 0x56,
905 .update_mask = 0x18,
906 .update_val = 0x10,
907 .update_val_idle = 0x18,
908 .update_val_normal = 0x10,
909 .voltage_bank = 0x01,
910 .voltage_reg = 0x56,
911 .voltage_mask = 0x07,
913 [AB8505_LDO_INTCORE] = {
914 .desc = {
915 .name = "LDO-INTCORE",
916 .ops = &ab8500_regulator_volt_mode_ops,
917 .type = REGULATOR_VOLTAGE,
918 .id = AB8505_LDO_INTCORE,
919 .owner = THIS_MODULE,
920 .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
921 .volt_table = ldo_vintcore_voltages,
923 .load_lp_uA = 5000,
924 .update_bank = 0x03,
925 .update_reg = 0x80,
926 .update_mask = 0x44,
927 .update_val = 0x04,
928 .update_val_idle = 0x44,
929 .update_val_normal = 0x04,
930 .voltage_bank = 0x03,
931 .voltage_reg = 0x80,
932 .voltage_mask = 0x38,
936 * Fixed Voltage Regulators
937 * name, fixed mV,
938 * update bank, reg, mask, enable val
940 [AB8505_LDO_ADC] = {
941 .desc = {
942 .name = "LDO-ADC",
943 .ops = &ab8500_regulator_mode_ops,
944 .type = REGULATOR_VOLTAGE,
945 .id = AB8505_LDO_ADC,
946 .owner = THIS_MODULE,
947 .n_voltages = 1,
948 .volt_table = fixed_2000000_voltage,
949 .enable_time = 10000,
951 .load_lp_uA = 1000,
952 .update_bank = 0x03,
953 .update_reg = 0x80,
954 .update_mask = 0x82,
955 .update_val = 0x02,
956 .update_val_idle = 0x82,
957 .update_val_normal = 0x02,
959 [AB8505_LDO_USB] = {
960 .desc = {
961 .name = "LDO-USB",
962 .ops = &ab8500_regulator_mode_ops,
963 .type = REGULATOR_VOLTAGE,
964 .id = AB8505_LDO_USB,
965 .owner = THIS_MODULE,
966 .n_voltages = 1,
967 .volt_table = fixed_3300000_voltage,
969 .update_bank = 0x03,
970 .update_reg = 0x82,
971 .update_mask = 0x03,
972 .update_val = 0x01,
973 .update_val_idle = 0x03,
974 .update_val_normal = 0x01,
976 [AB8505_LDO_AUDIO] = {
977 .desc = {
978 .name = "LDO-AUDIO",
979 .ops = &ab8500_regulator_volt_ops,
980 .type = REGULATOR_VOLTAGE,
981 .id = AB8505_LDO_AUDIO,
982 .owner = THIS_MODULE,
983 .n_voltages = ARRAY_SIZE(ldo_vaudio_voltages),
984 .volt_table = ldo_vaudio_voltages,
986 .update_bank = 0x03,
987 .update_reg = 0x83,
988 .update_mask = 0x02,
989 .update_val = 0x02,
990 .voltage_bank = 0x01,
991 .voltage_reg = 0x57,
992 .voltage_mask = 0x70,
994 [AB8505_LDO_ANAMIC1] = {
995 .desc = {
996 .name = "LDO-ANAMIC1",
997 .ops = &ab8500_regulator_anamic_mode_ops,
998 .type = REGULATOR_VOLTAGE,
999 .id = AB8505_LDO_ANAMIC1,
1000 .owner = THIS_MODULE,
1001 .n_voltages = 1,
1002 .volt_table = fixed_2050000_voltage,
1004 .shared_mode = &ldo_anamic1_shared,
1005 .update_bank = 0x03,
1006 .update_reg = 0x83,
1007 .update_mask = 0x08,
1008 .update_val = 0x08,
1009 .mode_bank = 0x01,
1010 .mode_reg = 0x54,
1011 .mode_mask = 0x04,
1012 .mode_val_idle = 0x04,
1013 .mode_val_normal = 0x00,
1015 [AB8505_LDO_ANAMIC2] = {
1016 .desc = {
1017 .name = "LDO-ANAMIC2",
1018 .ops = &ab8500_regulator_anamic_mode_ops,
1019 .type = REGULATOR_VOLTAGE,
1020 .id = AB8505_LDO_ANAMIC2,
1021 .owner = THIS_MODULE,
1022 .n_voltages = 1,
1023 .volt_table = fixed_2050000_voltage,
1025 .shared_mode = &ldo_anamic2_shared,
1026 .update_bank = 0x03,
1027 .update_reg = 0x83,
1028 .update_mask = 0x10,
1029 .update_val = 0x10,
1030 .mode_bank = 0x01,
1031 .mode_reg = 0x54,
1032 .mode_mask = 0x04,
1033 .mode_val_idle = 0x04,
1034 .mode_val_normal = 0x00,
1036 [AB8505_LDO_AUX8] = {
1037 .desc = {
1038 .name = "LDO-AUX8",
1039 .ops = &ab8500_regulator_ops,
1040 .type = REGULATOR_VOLTAGE,
1041 .id = AB8505_LDO_AUX8,
1042 .owner = THIS_MODULE,
1043 .n_voltages = 1,
1044 .volt_table = fixed_1800000_voltage,
1046 .update_bank = 0x03,
1047 .update_reg = 0x83,
1048 .update_mask = 0x04,
1049 .update_val = 0x04,
1052 * Regulators with fixed voltage and normal/idle modes
1054 [AB8505_LDO_ANA] = {
1055 .desc = {
1056 .name = "LDO-ANA",
1057 .ops = &ab8500_regulator_volt_mode_ops,
1058 .type = REGULATOR_VOLTAGE,
1059 .id = AB8505_LDO_ANA,
1060 .owner = THIS_MODULE,
1061 .n_voltages = ARRAY_SIZE(ldo_vana_voltages),
1062 .volt_table = ldo_vana_voltages,
1064 .load_lp_uA = 1000,
1065 .update_bank = 0x04,
1066 .update_reg = 0x06,
1067 .update_mask = 0x0c,
1068 .update_val = 0x04,
1069 .update_val_idle = 0x0c,
1070 .update_val_normal = 0x04,
1071 .voltage_bank = 0x04,
1072 .voltage_reg = 0x29,
1073 .voltage_mask = 0x7,
1077 static struct ab8500_shared_mode ldo_anamic1_shared = {
1078 .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC2],
1081 static struct ab8500_shared_mode ldo_anamic2_shared = {
1082 .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC1],
1085 struct ab8500_reg_init {
1086 u8 bank;
1087 u8 addr;
1088 u8 mask;
1091 #define REG_INIT(_id, _bank, _addr, _mask) \
1092 [_id] = { \
1093 .bank = _bank, \
1094 .addr = _addr, \
1095 .mask = _mask, \
1098 /* AB8500 register init */
1099 static struct ab8500_reg_init ab8500_reg_init[] = {
1101 * 0x30, VanaRequestCtrl
1102 * 0xc0, VextSupply1RequestCtrl
1104 REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xf0),
1106 * 0x03, VextSupply2RequestCtrl
1107 * 0x0c, VextSupply3RequestCtrl
1108 * 0x30, Vaux1RequestCtrl
1109 * 0xc0, Vaux2RequestCtrl
1111 REG_INIT(AB8500_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
1113 * 0x03, Vaux3RequestCtrl
1114 * 0x04, SwHPReq
1116 REG_INIT(AB8500_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
1118 * 0x08, VanaSysClkReq1HPValid
1119 * 0x20, Vaux1SysClkReq1HPValid
1120 * 0x40, Vaux2SysClkReq1HPValid
1121 * 0x80, Vaux3SysClkReq1HPValid
1123 REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xe8),
1125 * 0x10, VextSupply1SysClkReq1HPValid
1126 * 0x20, VextSupply2SysClkReq1HPValid
1127 * 0x40, VextSupply3SysClkReq1HPValid
1129 REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x70),
1131 * 0x08, VanaHwHPReq1Valid
1132 * 0x20, Vaux1HwHPReq1Valid
1133 * 0x40, Vaux2HwHPReq1Valid
1134 * 0x80, Vaux3HwHPReq1Valid
1136 REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xe8),
1138 * 0x01, VextSupply1HwHPReq1Valid
1139 * 0x02, VextSupply2HwHPReq1Valid
1140 * 0x04, VextSupply3HwHPReq1Valid
1142 REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x07),
1144 * 0x08, VanaHwHPReq2Valid
1145 * 0x20, Vaux1HwHPReq2Valid
1146 * 0x40, Vaux2HwHPReq2Valid
1147 * 0x80, Vaux3HwHPReq2Valid
1149 REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xe8),
1151 * 0x01, VextSupply1HwHPReq2Valid
1152 * 0x02, VextSupply2HwHPReq2Valid
1153 * 0x04, VextSupply3HwHPReq2Valid
1155 REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x07),
1157 * 0x20, VanaSwHPReqValid
1158 * 0x80, Vaux1SwHPReqValid
1160 REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xa0),
1162 * 0x01, Vaux2SwHPReqValid
1163 * 0x02, Vaux3SwHPReqValid
1164 * 0x04, VextSupply1SwHPReqValid
1165 * 0x08, VextSupply2SwHPReqValid
1166 * 0x10, VextSupply3SwHPReqValid
1168 REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x1f),
1170 * 0x02, SysClkReq2Valid1
1171 * 0x04, SysClkReq3Valid1
1172 * 0x08, SysClkReq4Valid1
1173 * 0x10, SysClkReq5Valid1
1174 * 0x20, SysClkReq6Valid1
1175 * 0x40, SysClkReq7Valid1
1176 * 0x80, SysClkReq8Valid1
1178 REG_INIT(AB8500_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe),
1180 * 0x02, SysClkReq2Valid2
1181 * 0x04, SysClkReq3Valid2
1182 * 0x08, SysClkReq4Valid2
1183 * 0x10, SysClkReq5Valid2
1184 * 0x20, SysClkReq6Valid2
1185 * 0x40, SysClkReq7Valid2
1186 * 0x80, SysClkReq8Valid2
1188 REG_INIT(AB8500_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe),
1190 * 0x02, VTVoutEna
1191 * 0x04, Vintcore12Ena
1192 * 0x38, Vintcore12Sel
1193 * 0x40, Vintcore12LP
1194 * 0x80, VTVoutLP
1196 REG_INIT(AB8500_REGUMISC1, 0x03, 0x80, 0xfe),
1198 * 0x02, VaudioEna
1199 * 0x04, VdmicEna
1200 * 0x08, Vamic1Ena
1201 * 0x10, Vamic2Ena
1203 REG_INIT(AB8500_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
1205 * 0x01, Vamic1_dzout
1206 * 0x02, Vamic2_dzout
1208 REG_INIT(AB8500_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
1210 * 0x03, VpllRegu (NOTE! PRCMU register bits)
1211 * 0x0c, VanaRegu
1213 REG_INIT(AB8500_VPLLVANAREGU, 0x04, 0x06, 0x0f),
1215 * 0x01, VrefDDREna
1216 * 0x02, VrefDDRSleepMode
1218 REG_INIT(AB8500_VREFDDR, 0x04, 0x07, 0x03),
1220 * 0x03, VextSupply1Regu
1221 * 0x0c, VextSupply2Regu
1222 * 0x30, VextSupply3Regu
1223 * 0x40, ExtSupply2Bypass
1224 * 0x80, ExtSupply3Bypass
1226 REG_INIT(AB8500_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
1228 * 0x03, Vaux1Regu
1229 * 0x0c, Vaux2Regu
1231 REG_INIT(AB8500_VAUX12REGU, 0x04, 0x09, 0x0f),
1233 * 0x03, Vaux3Regu
1235 REG_INIT(AB8500_VRF1VAUX3REGU, 0x04, 0x0a, 0x03),
1237 * 0x0f, Vaux1Sel
1239 REG_INIT(AB8500_VAUX1SEL, 0x04, 0x1f, 0x0f),
1241 * 0x0f, Vaux2Sel
1243 REG_INIT(AB8500_VAUX2SEL, 0x04, 0x20, 0x0f),
1245 * 0x07, Vaux3Sel
1247 REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x07),
1249 * 0x01, VextSupply12LP
1251 REG_INIT(AB8500_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
1253 * 0x04, Vaux1Disch
1254 * 0x08, Vaux2Disch
1255 * 0x10, Vaux3Disch
1256 * 0x20, Vintcore12Disch
1257 * 0x40, VTVoutDisch
1258 * 0x80, VaudioDisch
1260 REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
1262 * 0x02, VanaDisch
1263 * 0x04, VdmicPullDownEna
1264 * 0x10, VdmicDisch
1266 REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
1269 /* AB8505 register init */
1270 static struct ab8500_reg_init ab8505_reg_init[] = {
1272 * 0x03, VarmRequestCtrl
1273 * 0x0c, VsmpsCRequestCtrl
1274 * 0x30, VsmpsARequestCtrl
1275 * 0xc0, VsmpsBRequestCtrl
1277 REG_INIT(AB8505_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
1279 * 0x03, VsafeRequestCtrl
1280 * 0x0c, VpllRequestCtrl
1281 * 0x30, VanaRequestCtrl
1283 REG_INIT(AB8505_REGUREQUESTCTRL2, 0x03, 0x04, 0x3f),
1285 * 0x30, Vaux1RequestCtrl
1286 * 0xc0, Vaux2RequestCtrl
1288 REG_INIT(AB8505_REGUREQUESTCTRL3, 0x03, 0x05, 0xf0),
1290 * 0x03, Vaux3RequestCtrl
1291 * 0x04, SwHPReq
1293 REG_INIT(AB8505_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
1295 * 0x01, VsmpsASysClkReq1HPValid
1296 * 0x02, VsmpsBSysClkReq1HPValid
1297 * 0x04, VsafeSysClkReq1HPValid
1298 * 0x08, VanaSysClkReq1HPValid
1299 * 0x10, VpllSysClkReq1HPValid
1300 * 0x20, Vaux1SysClkReq1HPValid
1301 * 0x40, Vaux2SysClkReq1HPValid
1302 * 0x80, Vaux3SysClkReq1HPValid
1304 REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
1306 * 0x01, VsmpsCSysClkReq1HPValid
1307 * 0x02, VarmSysClkReq1HPValid
1308 * 0x04, VbbSysClkReq1HPValid
1309 * 0x08, VsmpsMSysClkReq1HPValid
1311 REG_INIT(AB8505_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x0f),
1313 * 0x01, VsmpsAHwHPReq1Valid
1314 * 0x02, VsmpsBHwHPReq1Valid
1315 * 0x04, VsafeHwHPReq1Valid
1316 * 0x08, VanaHwHPReq1Valid
1317 * 0x10, VpllHwHPReq1Valid
1318 * 0x20, Vaux1HwHPReq1Valid
1319 * 0x40, Vaux2HwHPReq1Valid
1320 * 0x80, Vaux3HwHPReq1Valid
1322 REG_INIT(AB8505_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
1324 * 0x08, VsmpsMHwHPReq1Valid
1326 REG_INIT(AB8505_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x08),
1328 * 0x01, VsmpsAHwHPReq2Valid
1329 * 0x02, VsmpsBHwHPReq2Valid
1330 * 0x04, VsafeHwHPReq2Valid
1331 * 0x08, VanaHwHPReq2Valid
1332 * 0x10, VpllHwHPReq2Valid
1333 * 0x20, Vaux1HwHPReq2Valid
1334 * 0x40, Vaux2HwHPReq2Valid
1335 * 0x80, Vaux3HwHPReq2Valid
1337 REG_INIT(AB8505_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
1339 * 0x08, VsmpsMHwHPReq2Valid
1341 REG_INIT(AB8505_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x08),
1343 * 0x01, VsmpsCSwHPReqValid
1344 * 0x02, VarmSwHPReqValid
1345 * 0x04, VsmpsASwHPReqValid
1346 * 0x08, VsmpsBSwHPReqValid
1347 * 0x10, VsafeSwHPReqValid
1348 * 0x20, VanaSwHPReqValid
1349 * 0x40, VpllSwHPReqValid
1350 * 0x80, Vaux1SwHPReqValid
1352 REG_INIT(AB8505_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
1354 * 0x01, Vaux2SwHPReqValid
1355 * 0x02, Vaux3SwHPReqValid
1356 * 0x20, VsmpsMSwHPReqValid
1358 REG_INIT(AB8505_REGUSWHPREQVALID2, 0x03, 0x0e, 0x23),
1360 * 0x02, SysClkReq2Valid1
1361 * 0x04, SysClkReq3Valid1
1362 * 0x08, SysClkReq4Valid1
1364 REG_INIT(AB8505_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0x0e),
1366 * 0x02, SysClkReq2Valid2
1367 * 0x04, SysClkReq3Valid2
1368 * 0x08, SysClkReq4Valid2
1370 REG_INIT(AB8505_REGUSYSCLKREQVALID2, 0x03, 0x10, 0x0e),
1372 * 0x01, Vaux4SwHPReqValid
1373 * 0x02, Vaux4HwHPReq2Valid
1374 * 0x04, Vaux4HwHPReq1Valid
1375 * 0x08, Vaux4SysClkReq1HPValid
1377 REG_INIT(AB8505_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
1379 * 0x02, VadcEna
1380 * 0x04, VintCore12Ena
1381 * 0x38, VintCore12Sel
1382 * 0x40, VintCore12LP
1383 * 0x80, VadcLP
1385 REG_INIT(AB8505_REGUMISC1, 0x03, 0x80, 0xfe),
1387 * 0x02, VaudioEna
1388 * 0x04, VdmicEna
1389 * 0x08, Vamic1Ena
1390 * 0x10, Vamic2Ena
1392 REG_INIT(AB8505_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
1394 * 0x01, Vamic1_dzout
1395 * 0x02, Vamic2_dzout
1397 REG_INIT(AB8505_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
1399 * 0x03, VsmpsARegu
1400 * 0x0c, VsmpsASelCtrl
1401 * 0x10, VsmpsAAutoMode
1402 * 0x20, VsmpsAPWMMode
1404 REG_INIT(AB8505_VSMPSAREGU, 0x04, 0x03, 0x3f),
1406 * 0x03, VsmpsBRegu
1407 * 0x0c, VsmpsBSelCtrl
1408 * 0x10, VsmpsBAutoMode
1409 * 0x20, VsmpsBPWMMode
1411 REG_INIT(AB8505_VSMPSBREGU, 0x04, 0x04, 0x3f),
1413 * 0x03, VsafeRegu
1414 * 0x0c, VsafeSelCtrl
1415 * 0x10, VsafeAutoMode
1416 * 0x20, VsafePWMMode
1418 REG_INIT(AB8505_VSAFEREGU, 0x04, 0x05, 0x3f),
1420 * 0x03, VpllRegu (NOTE! PRCMU register bits)
1421 * 0x0c, VanaRegu
1423 REG_INIT(AB8505_VPLLVANAREGU, 0x04, 0x06, 0x0f),
1425 * 0x03, VextSupply1Regu
1426 * 0x0c, VextSupply2Regu
1427 * 0x30, VextSupply3Regu
1428 * 0x40, ExtSupply2Bypass
1429 * 0x80, ExtSupply3Bypass
1431 REG_INIT(AB8505_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
1433 * 0x03, Vaux1Regu
1434 * 0x0c, Vaux2Regu
1436 REG_INIT(AB8505_VAUX12REGU, 0x04, 0x09, 0x0f),
1438 * 0x0f, Vaux3Regu
1440 REG_INIT(AB8505_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
1442 * 0x3f, VsmpsASel1
1444 REG_INIT(AB8505_VSMPSASEL1, 0x04, 0x13, 0x3f),
1446 * 0x3f, VsmpsASel2
1448 REG_INIT(AB8505_VSMPSASEL2, 0x04, 0x14, 0x3f),
1450 * 0x3f, VsmpsASel3
1452 REG_INIT(AB8505_VSMPSASEL3, 0x04, 0x15, 0x3f),
1454 * 0x3f, VsmpsBSel1
1456 REG_INIT(AB8505_VSMPSBSEL1, 0x04, 0x17, 0x3f),
1458 * 0x3f, VsmpsBSel2
1460 REG_INIT(AB8505_VSMPSBSEL2, 0x04, 0x18, 0x3f),
1462 * 0x3f, VsmpsBSel3
1464 REG_INIT(AB8505_VSMPSBSEL3, 0x04, 0x19, 0x3f),
1466 * 0x7f, VsafeSel1
1468 REG_INIT(AB8505_VSAFESEL1, 0x04, 0x1b, 0x7f),
1470 * 0x3f, VsafeSel2
1472 REG_INIT(AB8505_VSAFESEL2, 0x04, 0x1c, 0x7f),
1474 * 0x3f, VsafeSel3
1476 REG_INIT(AB8505_VSAFESEL3, 0x04, 0x1d, 0x7f),
1478 * 0x0f, Vaux1Sel
1480 REG_INIT(AB8505_VAUX1SEL, 0x04, 0x1f, 0x0f),
1482 * 0x0f, Vaux2Sel
1484 REG_INIT(AB8505_VAUX2SEL, 0x04, 0x20, 0x0f),
1486 * 0x07, Vaux3Sel
1487 * 0x30, VRF1Sel
1489 REG_INIT(AB8505_VRF1VAUX3SEL, 0x04, 0x21, 0x37),
1491 * 0x03, Vaux4RequestCtrl
1493 REG_INIT(AB8505_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
1495 * 0x03, Vaux4Regu
1497 REG_INIT(AB8505_VAUX4REGU, 0x04, 0x2e, 0x03),
1499 * 0x0f, Vaux4Sel
1501 REG_INIT(AB8505_VAUX4SEL, 0x04, 0x2f, 0x0f),
1503 * 0x04, Vaux1Disch
1504 * 0x08, Vaux2Disch
1505 * 0x10, Vaux3Disch
1506 * 0x20, Vintcore12Disch
1507 * 0x40, VTVoutDisch
1508 * 0x80, VaudioDisch
1510 REG_INIT(AB8505_REGUCTRLDISCH, 0x04, 0x43, 0xfc),
1512 * 0x02, VanaDisch
1513 * 0x04, VdmicPullDownEna
1514 * 0x10, VdmicDisch
1516 REG_INIT(AB8505_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
1518 * 0x01, Vaux4Disch
1520 REG_INIT(AB8505_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
1522 * 0x07, Vaux5Sel
1523 * 0x08, Vaux5LP
1524 * 0x10, Vaux5Ena
1525 * 0x20, Vaux5Disch
1526 * 0x40, Vaux5DisSfst
1527 * 0x80, Vaux5DisPulld
1529 REG_INIT(AB8505_CTRLVAUX5, 0x01, 0x55, 0xff),
1531 * 0x07, Vaux6Sel
1532 * 0x08, Vaux6LP
1533 * 0x10, Vaux6Ena
1534 * 0x80, Vaux6DisPulld
1536 REG_INIT(AB8505_CTRLVAUX6, 0x01, 0x56, 0x9f),
1539 static struct of_regulator_match ab8500_regulator_match[] = {
1540 { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
1541 { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
1542 { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
1543 { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
1544 { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
1545 { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
1546 { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
1547 { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
1548 { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
1549 { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
1552 static struct of_regulator_match ab8505_regulator_match[] = {
1553 { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8505_LDO_AUX1, },
1554 { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8505_LDO_AUX2, },
1555 { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8505_LDO_AUX3, },
1556 { .name = "ab8500_ldo_aux4", .driver_data = (void *) AB8505_LDO_AUX4, },
1557 { .name = "ab8500_ldo_aux5", .driver_data = (void *) AB8505_LDO_AUX5, },
1558 { .name = "ab8500_ldo_aux6", .driver_data = (void *) AB8505_LDO_AUX6, },
1559 { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8505_LDO_INTCORE, },
1560 { .name = "ab8500_ldo_adc", .driver_data = (void *) AB8505_LDO_ADC, },
1561 { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8505_LDO_AUDIO, },
1562 { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, },
1563 { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
1564 { .name = "ab8500_ldo_aux8", .driver_data = (void *) AB8505_LDO_AUX8, },
1565 { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8505_LDO_ANA, },
1568 static struct {
1569 struct ab8500_regulator_info *info;
1570 int info_size;
1571 struct ab8500_reg_init *init;
1572 int init_size;
1573 struct of_regulator_match *match;
1574 int match_size;
1575 } abx500_regulator;
1577 static void abx500_get_regulator_info(struct ab8500 *ab8500)
1579 if (is_ab8505(ab8500)) {
1580 abx500_regulator.info = ab8505_regulator_info;
1581 abx500_regulator.info_size = ARRAY_SIZE(ab8505_regulator_info);
1582 abx500_regulator.init = ab8505_reg_init;
1583 abx500_regulator.init_size = AB8505_NUM_REGULATOR_REGISTERS;
1584 abx500_regulator.match = ab8505_regulator_match;
1585 abx500_regulator.match_size = ARRAY_SIZE(ab8505_regulator_match);
1586 } else {
1587 abx500_regulator.info = ab8500_regulator_info;
1588 abx500_regulator.info_size = ARRAY_SIZE(ab8500_regulator_info);
1589 abx500_regulator.init = ab8500_reg_init;
1590 abx500_regulator.init_size = AB8500_NUM_REGULATOR_REGISTERS;
1591 abx500_regulator.match = ab8500_regulator_match;
1592 abx500_regulator.match_size = ARRAY_SIZE(ab8500_regulator_match);
1596 static int ab8500_regulator_register(struct platform_device *pdev,
1597 struct regulator_init_data *init_data,
1598 int id, struct device_node *np)
1600 struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
1601 struct ab8500_regulator_info *info = NULL;
1602 struct regulator_config config = { };
1604 /* assign per-regulator data */
1605 info = &abx500_regulator.info[id];
1606 info->dev = &pdev->dev;
1608 config.dev = &pdev->dev;
1609 config.init_data = init_data;
1610 config.driver_data = info;
1611 config.of_node = np;
1613 /* fix for hardware before ab8500v2.0 */
1614 if (is_ab8500_1p1_or_earlier(ab8500)) {
1615 if (info->desc.id == AB8500_LDO_AUX3) {
1616 info->desc.n_voltages =
1617 ARRAY_SIZE(ldo_vauxn_voltages);
1618 info->desc.volt_table = ldo_vauxn_voltages;
1619 info->voltage_mask = 0xf;
1623 /* register regulator with framework */
1624 info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
1625 &config);
1626 if (IS_ERR(info->regulator)) {
1627 dev_err(&pdev->dev, "failed to register regulator %s\n",
1628 info->desc.name);
1629 return PTR_ERR(info->regulator);
1632 return 0;
1635 static int ab8500_regulator_probe(struct platform_device *pdev)
1637 struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
1638 struct device_node *np = pdev->dev.of_node;
1639 struct of_regulator_match *match;
1640 int err, i;
1642 if (!ab8500) {
1643 dev_err(&pdev->dev, "null mfd parent\n");
1644 return -EINVAL;
1647 abx500_get_regulator_info(ab8500);
1649 err = of_regulator_match(&pdev->dev, np,
1650 abx500_regulator.match,
1651 abx500_regulator.match_size);
1652 if (err < 0) {
1653 dev_err(&pdev->dev,
1654 "Error parsing regulator init data: %d\n", err);
1655 return err;
1658 match = abx500_regulator.match;
1659 for (i = 0; i < abx500_regulator.info_size; i++) {
1660 err = ab8500_regulator_register(pdev, match[i].init_data, i,
1661 match[i].of_node);
1662 if (err)
1663 return err;
1666 return 0;
1669 static struct platform_driver ab8500_regulator_driver = {
1670 .probe = ab8500_regulator_probe,
1671 .driver = {
1672 .name = "ab8500-regulator",
1676 static int __init ab8500_regulator_init(void)
1678 int ret;
1680 ret = platform_driver_register(&ab8500_regulator_driver);
1681 if (ret != 0)
1682 pr_err("Failed to register ab8500 regulator: %d\n", ret);
1684 return ret;
1686 subsys_initcall(ab8500_regulator_init);
1688 static void __exit ab8500_regulator_exit(void)
1690 platform_driver_unregister(&ab8500_regulator_driver);
1692 module_exit(ab8500_regulator_exit);
1694 MODULE_LICENSE("GPL v2");
1695 MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
1696 MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
1697 MODULE_AUTHOR("Daniel Willerud <daniel.willerud@stericsson.com>");
1698 MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
1699 MODULE_ALIAS("platform:ab8500-regulator");