mm: page_alloc: embed OOM killing naturally into allocation slowpath
[linux-2.6/btrfs-unstable.git] / arch / x86 / kernel / irqinit.c
blob70e181ea1eac1f2da444482e6714e61b52d5a19e
1 #include <linux/linkage.h>
2 #include <linux/errno.h>
3 #include <linux/signal.h>
4 #include <linux/sched.h>
5 #include <linux/ioport.h>
6 #include <linux/interrupt.h>
7 #include <linux/timex.h>
8 #include <linux/random.h>
9 #include <linux/kprobes.h>
10 #include <linux/init.h>
11 #include <linux/kernel_stat.h>
12 #include <linux/device.h>
13 #include <linux/bitops.h>
14 #include <linux/acpi.h>
15 #include <linux/io.h>
16 #include <linux/delay.h>
18 #include <linux/atomic.h>
19 #include <asm/timer.h>
20 #include <asm/hw_irq.h>
21 #include <asm/pgtable.h>
22 #include <asm/desc.h>
23 #include <asm/apic.h>
24 #include <asm/setup.h>
25 #include <asm/i8259.h>
26 #include <asm/traps.h>
27 #include <asm/prom.h>
30 * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
31 * (these are usually mapped to vectors 0x30-0x3f)
35 * The IO-APIC gives us many more interrupt sources. Most of these
36 * are unused but an SMP system is supposed to have enough memory ...
37 * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
38 * across the spectrum, so we really want to be prepared to get all
39 * of these. Plus, more powerful systems might have more than 64
40 * IO-APIC registers.
42 * (these are usually mapped into the 0x30-0xff vector range)
46 * IRQ2 is cascade interrupt to second interrupt controller
48 static struct irqaction irq2 = {
49 .handler = no_action,
50 .name = "cascade",
51 .flags = IRQF_NO_THREAD,
54 DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
55 [0 ... NR_VECTORS - 1] = VECTOR_UNDEFINED,
58 int vector_used_by_percpu_irq(unsigned int vector)
60 int cpu;
62 for_each_online_cpu(cpu) {
63 if (per_cpu(vector_irq, cpu)[vector] > VECTOR_UNDEFINED)
64 return 1;
67 return 0;
70 void __init init_ISA_irqs(void)
72 struct irq_chip *chip = legacy_pic->chip;
73 int i;
75 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
76 init_bsp_APIC();
77 #endif
78 legacy_pic->init(0);
80 for (i = 0; i < nr_legacy_irqs(); i++)
81 irq_set_chip_and_handler(i, chip, handle_level_irq);
84 void __init init_IRQ(void)
86 int i;
89 * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
90 * If these IRQ's are handled by legacy interrupt-controllers like PIC,
91 * then this configuration will likely be static after the boot. If
92 * these IRQ's are handled by more mordern controllers like IO-APIC,
93 * then this vector space can be freed and re-used dynamically as the
94 * irq's migrate etc.
96 for (i = 0; i < nr_legacy_irqs(); i++)
97 per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
99 x86_init.irqs.intr_init();
102 static void __init smp_intr_init(void)
104 #ifdef CONFIG_SMP
106 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
107 * IPI, driven by wakeup.
109 alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
111 /* IPI for generic function call */
112 alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
114 /* IPI for generic single function call */
115 alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
116 call_function_single_interrupt);
118 /* Low priority IPI to cleanup after moving an irq */
119 set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
120 set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
122 /* IPI used for rebooting/stopping */
123 alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
124 #endif /* CONFIG_SMP */
127 static void __init apic_intr_init(void)
129 smp_intr_init();
131 #ifdef CONFIG_X86_THERMAL_VECTOR
132 alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
133 #endif
134 #ifdef CONFIG_X86_MCE_THRESHOLD
135 alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
136 #endif
138 #ifdef CONFIG_X86_LOCAL_APIC
139 /* self generated IPI for local APIC timer */
140 alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
142 /* IPI for X86 platform specific use */
143 alloc_intr_gate(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi);
144 #ifdef CONFIG_HAVE_KVM
145 /* IPI for KVM to deliver posted interrupt */
146 alloc_intr_gate(POSTED_INTR_VECTOR, kvm_posted_intr_ipi);
147 #endif
149 /* IPI vectors for APIC spurious and error interrupts */
150 alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
151 alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
153 /* IRQ work interrupts: */
154 # ifdef CONFIG_IRQ_WORK
155 alloc_intr_gate(IRQ_WORK_VECTOR, irq_work_interrupt);
156 # endif
158 #endif
161 void __init native_init_IRQ(void)
163 int i;
165 /* Execute any quirks before the call gates are initialised: */
166 x86_init.irqs.pre_vector_init();
168 apic_intr_init();
171 * Cover the whole vector space, no vector can escape
172 * us. (some of these will be overridden and become
173 * 'special' SMP interrupts)
175 i = FIRST_EXTERNAL_VECTOR;
176 #ifndef CONFIG_X86_LOCAL_APIC
177 #define first_system_vector NR_VECTORS
178 #endif
179 for_each_clear_bit_from(i, used_vectors, first_system_vector) {
180 /* IA32_SYSCALL_VECTOR could be used in trap_init already. */
181 set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
183 #ifdef CONFIG_X86_LOCAL_APIC
184 for_each_clear_bit_from(i, used_vectors, NR_VECTORS)
185 set_intr_gate(i, spurious_interrupt);
186 #endif
188 if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
189 setup_irq(2, &irq2);
191 #ifdef CONFIG_X86_32
192 irq_ctx_init(smp_processor_id());
193 #endif