include/asm-sh/landisk/iodata_landisk.h

   1 #ifndef __ASM_SH_IODATA_LANDISK_H
   2 #define __ASM_SH_IODATA_LANDISK_H
   3
   4 /*
   5  * linux/include/asm-sh/landisk/iodata_landisk.h
   6  *
   7  * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
   8  *
   9  * IO-DATA LANDISK support
  10  */
  11
  12 /* Box specific addresses.  */
  13
  14 #define PA_USB          0xa4000000      /* USB Controller M66590 */
  15
  16 #define PA_ATARST       0xb0000000      /* ATA/FATA Access Control Register */
  17 #define PA_LED          0xb0000001      /* LED Control Register */
  18 #define PA_STATUS       0xb0000002      /* Switch Status Register */
  19 #define PA_SHUTDOWN     0xb0000003      /* Shutdown Control Register */
  20 #define PA_PCIPME       0xb0000004      /* PCI PME Status Register */
  21 #define PA_IMASK        0xb0000005      /* Interrupt Mask Register */
  22 /* 2003.10.31 I-O DATA NSD NWG  add.    for shutdown port clear */
  23 #define PA_PWRINT_CLR   0xb0000006      /* Shutdown Interrupt clear Register */
  24
  25 #define PA_AREA5_IO     0xb4000000      /* Area 5 IO Memory */
  26 #define PA_AREA6_IO     0xb8000000      /* Area 6 IO Memory */
  27 #define PA_LCD_CLRDSP   0x00            /* LCD Clear Display Offset */
  28 #define PA_LCD_RTNHOME  0x00            /* LCD Return Home Offset */
  29 #define PA_LCD_ENTMODE  0x00            /* LCD Entry Mode Offset */
  30 #define PA_LCD_DSPCTL   0x00            /* LCD Display ON/OFF Control Offset */
  31 #define PA_LCD_FUNC     0x00            /* LCD Function Set Offset */
  32 #define PA_LCD_CGRAM    0x00            /* LCD Set CGRAM Address Offset */
  33 #define PA_LCD_DDRAM    0x00            /* LCD Set DDRAM Address Offset */
  34 #define PA_LCD_RDFLAG   0x01            /* LCD Read Busy Flag Offset */
  35 #define PA_LCD_WTDATA   0x02            /* LCD Write Datat to RAM Offset */
  36 #define PA_LCD_RDDATA   0x03            /* LCD Read Data from RAM Offset */
  37 #define PA_PIDE_OFFSET  0x40            /* CF IDE Offset */
  38 #define PA_SIDE_OFFSET  0x40            /* HDD IDE Offset */
  39
  40 #define IRQ_PCIINTA     5               /* PCI INTA IRQ */
  41 #define IRQ_PCIINTB     6               /* PCI INTB IRQ */
  42 #define IRQ_PCIINDC     7               /* PCI INTC IRQ */
  43 #define IRQ_PCIINTD     8               /* PCI INTD IRQ */
  44 #define IRQ_ATA         9               /* ATA IRQ */
  45 #define IRQ_FATA        10              /* FATA IRQ */
  46 #define IRQ_POWER       11              /* Power Switch IRQ */
  47 #define IRQ_BUTTON      12              /* USL-5P Button IRQ */
  48 #define IRQ_FAULT       13              /* USL-5P Fault  IRQ */
  49
  50 #define SHUTDOWN_BTN_MAJOR      99      /* Shutdown button device major no. */
  51
  52 #define SHUTDOWN_LOOP_CNT       5       /* Shutdown button Detection loop */
  53 #define SHUTDOWN_DELAY          200     /* Shutdown button delay value(ms) */
  54
  55
  56 /* added by kogiidena */
  57 /*
  58  *  landisk_ledparam
  59  *
  60  * led  ------10 -6543210 -6543210 -6543210
  61  *     |000000..|0.......|0.......|U.......|
  62  *     |  HARD  |fastblik| blink  |   on   |
  63  *
  64  *   led0: power       U:update flag
  65  *   led1: error
  66  *   led2: usb1
  67  *   led3: usb2
  68  *   led4: usb3
  69  *   led5: usb4
  70  *   led6: usb5
  71  *
  72  */
  73 extern int landisk_ledparam;    /* from setup.c */
  74 extern int landisk_buzzerparam; /* from setup.c */
  75 extern int landisk_arch;        /* from setup.c */
  76
  77 #endif  /* __ASM_SH_IODATA_LANDISK_H */
  78