include/linux/regulator/machine.h

   1 /*
   2  * machine.h -- SoC Regulator support, machine/board driver API.
   3  *
   4  * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
   5  *
   6  * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  *
  12  * Regulator Machine/Board Interface.
  13  */
  14
  15 #ifndef __LINUX_REGULATOR_MACHINE_H_
  16 #define __LINUX_REGULATOR_MACHINE_H_
  17
  18 #include <linux/regulator/consumer.h>
  19 #include <linux/suspend.h>
  20
  21 struct regulator;
  22
  23 /*
  24  * Regulator operation constraint flags. These flags are used to enable
  25  * certain regulator operations and can be OR'ed together.
  26  *
  27  * VOLTAGE:  Regulator output voltage can be changed by software on this
  28  *           board/machine.
  29  * CURRENT:  Regulator output current can be changed by software on this
  30  *           board/machine.
  31  * MODE:     Regulator operating mode can be changed by software on this
  32  *           board/machine.
  33  * STATUS:   Regulator can be enabled and disabled.
  34  * DRMS:     Dynamic Regulator Mode Switching is enabled for this regulator.
  35  */
  36
  37 #define REGULATOR_CHANGE_VOLTAGE        0x1
  38 #define REGULATOR_CHANGE_CURRENT        0x2
  39 #define REGULATOR_CHANGE_MODE           0x4
  40 #define REGULATOR_CHANGE_STATUS         0x8
  41 #define REGULATOR_CHANGE_DRMS           0x10
  42
  43 /**
  44  * struct regulator_state - regulator state during low power syatem states
  45  *
  46  * This describes a regulators state during a system wide low power state.
  47  *
  48  * @uV: Operating voltage during suspend.
  49  * @mode: Operating mode during suspend.
  50  * @enabled: Enabled during suspend.
  51  */
  52 struct regulator_state {
  53         int uV; /* suspend voltage */
  54         unsigned int mode; /* suspend regulator operating mode */
  55         int enabled; /* is regulator enabled in this suspend state */
  56 };
  57
  58 /**
  59  * struct regulation_constraints - regulator operating constraints.
  60  *
  61  * This struct describes regulator and board/machine specific constraints.
  62  *
  63  * @name: Descriptive name for the constraints, used for display purposes.
  64  *
  65  * @min_uV: Smallest voltage consumers may set.
  66  * @max_uV: Largest voltage consumers may set.
  67  *
  68  * @min_uA: Smallest consumers consumers may set.
  69  * @max_uA: Largest current consumers may set.
  70  *
  71  * @valid_modes_mask: Mask of modes which may be configured by consumers.
  72  * @valid_ops_mask: Operations which may be performed by consumers.
  73  *
  74  * @always_on: Set if the regulator should never be disabled.
  75  * @boot_on: Set if the regulator is enabled when the system is initially
  76  *           started.
  77  * @apply_uV: Apply the voltage constraint when initialising.
  78  *
  79  * @input_uV: Input voltage for regulator when supplied by another regulator.
  80  *
  81  * @state_disk: State for regulator when system is suspended in disk mode.
  82  * @state_mem: State for regulator when system is suspended in mem mode.
  83  * @state_standby: State for regulator when system is suspended in standby
  84  *                 mode.
  85  * @initial_state: Suspend state to set by default.
  86  */
  87 struct regulation_constraints {
  88
  89         char *name;
  90
  91         /* voltage output range (inclusive) - for voltage control */
  92         int min_uV;
  93         int max_uV;
  94
  95         /* current output range (inclusive) - for current control */
  96         int min_uA;
  97         int max_uA;
  98
  99         /* valid regulator operating modes for this machine */
 100         unsigned int valid_modes_mask;
 101
 102         /* valid operations for regulator on this machine */
 103         unsigned int valid_ops_mask;
 104
 105         /* regulator input voltage - only if supply is another regulator */
 106         int input_uV;
 107
 108         /* regulator suspend states for global PMIC STANDBY/HIBERNATE */
 109         struct regulator_state state_disk;
 110         struct regulator_state state_mem;
 111         struct regulator_state state_standby;
 112         suspend_state_t initial_state; /* suspend state to set at init */
 113
 114         /* constriant flags */
 115         unsigned always_on:1;   /* regulator never off when system is on */
 116         unsigned boot_on:1;     /* bootloader/firmware enabled regulator */
 117         unsigned apply_uV:1;    /* apply uV constraint iff min == max */
 118 };
 119
 120 /**
 121  * struct regulator_consumer_supply - supply -> device mapping
 122  *
 123  * This maps a supply name to a device.
 124  *
 125  * @dev: Device structure for the consumer.
 126  * @supply: Name for the supply.
 127  */
 128 struct regulator_consumer_supply {
 129         struct device *dev;     /* consumer */
 130         const char *supply;     /* consumer supply - e.g. "vcc" */
 131 };
 132
 133 /**
 134  * struct regulator_init_data - regulator platform initialisation data.
 135  *
 136  * Initialisation constraints, our supply and consumers supplies.
 137  *
 138  * @supply_regulator_dev: Parent regulator (if any).
 139  *
 140  * @constraints: Constraints.  These must be specified for the regulator to
 141  *               be usable.
 142  * @num_consumer_supplies: Number of consumer device supplies.
 143  * @consumer_supplies: Consumer device supply configuration.
 144  *
 145  * @regulator_init: Callback invoked when the regulator has been registered.
 146  * @driver_data: Data passed to regulator_init.
 147  */
 148 struct regulator_init_data {
 149         struct device *supply_regulator_dev; /* or NULL for LINE */
 150
 151         struct regulation_constraints constraints;
 152
 153         int num_consumer_supplies;
 154         struct regulator_consumer_supply *consumer_supplies;
 155
 156         /* optional regulator machine specific init */
 157         int (*regulator_init)(void *driver_data);
 158         void *driver_data;      /* core does not touch this */
 159 };
 160
 161 int regulator_suspend_prepare(suspend_state_t state);
 162
 163 #endif