net: add support for Cavium PTP coprocessor

[linux-2.6/btrfs-unstable.git] / block / blk-wbt.c

/*
 * buffered writeback throttling. loosely based on CoDel. We can't drop
 * packets for IO scheduling, so the logic is something like this:
 *
 * - Monitor latencies in a defined window of time.
 * - If the minimum latency in the above window exceeds some target, increment
 *   scaling step and scale down queue depth by a factor of 2x. The monitoring
 *   window is then shrunk to 100 / sqrt(scaling step + 1).
 * - For any window where we don't have solid data on what the latencies
 *   look like, retain status quo.
 * - If latencies look good, decrement scaling step.
 * - If we're only doing writes, allow the scaling step to go negative. This
 *   will temporarily boost write performance, snapping back to a stable
 *   scaling step of 0 if reads show up or the heavy writers finish. Unlike
 *   positive scaling steps where we shrink the monitoring window, a negative
 *   scaling step retains the default step==0 window size.
 *
 * Copyright (C) 2016 Jens Axboe
 *
 */
#include <linux/kernel.h>
#include <linux/blk_types.h>
#include <linux/slab.h>
#include <linux/backing-dev.h>
#include <linux/swap.h>

#include "blk-wbt.h"

#define CREATE_TRACE_POINTS
#include <trace/events/wbt.h>

enum {
        /*
         * Default setting, we'll scale up (to 75% of QD max) or down (min 1)
         * from here depending on device stats
         */
        RWB_DEF_DEPTH   = 16,

        /*
         * 100msec window
         */
        RWB_WINDOW_NSEC         = 100 * 1000 * 1000ULL,

        /*
         * Disregard stats, if we don't meet this minimum
         */
        RWB_MIN_WRITE_SAMPLES   = 3,

        /*
         * If we have this number of consecutive windows with not enough
         * information to scale up or down, scale up.
         */
        RWB_UNKNOWN_BUMP        = 5,
};

static inline bool rwb_enabled(struct rq_wb *rwb)
{
        return rwb && rwb->wb_normal != 0;
}

/*
 * Increment 'v', if 'v' is below 'below'. Returns true if we succeeded,
 * false if 'v' + 1 would be bigger than 'below'.
 */
static bool atomic_inc_below(atomic_t *v, int below)
{
        int cur = atomic_read(v);

        for (;;) {
                int old;

                if (cur >= below)
                        return false;
                old = atomic_cmpxchg(v, cur, cur + 1);
                if (old == cur)
                        break;
                cur = old;
        }

        return true;
}

static void wb_timestamp(struct rq_wb *rwb, unsigned long *var)
{
        if (rwb_enabled(rwb)) {
                const unsigned long cur = jiffies;

                if (cur != *var)
                        *var = cur;
        }
}

/*
 * If a task was rate throttled in balance_dirty_pages() within the last
 * second or so, use that to indicate a higher cleaning rate.
 */
static bool wb_recent_wait(struct rq_wb *rwb)
{
        struct bdi_writeback *wb = &rwb->queue->backing_dev_info->wb;

        return time_before(jiffies, wb->dirty_sleep + HZ);
}

static inline struct rq_wait *get_rq_wait(struct rq_wb *rwb, bool is_kswapd)
{
        return &rwb->rq_wait[is_kswapd];
}

static void rwb_wake_all(struct rq_wb *rwb)
{
        int i;

        for (i = 0; i < WBT_NUM_RWQ; i++) {
                struct rq_wait *rqw = &rwb->rq_wait[i];

                if (waitqueue_active(&rqw->wait))
                        wake_up_all(&rqw->wait);
        }
}

void __wbt_done(struct rq_wb *rwb, enum wbt_flags wb_acct)
{
        struct rq_wait *rqw;
        int inflight, limit;

        if (!(wb_acct & WBT_TRACKED))
                return;

        rqw = get_rq_wait(rwb, wb_acct & WBT_KSWAPD);
        inflight = atomic_dec_return(&rqw->inflight);

        /*
         * wbt got disabled with IO in flight. Wake up any potential
         * waiters, we don't have to do more than that.
         */
        if (unlikely(!rwb_enabled(rwb))) {
                rwb_wake_all(rwb);
                return;
        }

        /*
         * If the device does write back caching, drop further down
         * before we wake people up.
         */
        if (rwb->wc && !wb_recent_wait(rwb))
                limit = 0;
        else
                limit = rwb->wb_normal;

        /*
         * Don't wake anyone up if we are above the normal limit.
         */
        if (inflight && inflight >= limit)
                return;

        if (waitqueue_active(&rqw->wait)) {
                int diff = limit - inflight;

                if (!inflight || diff >= rwb->wb_background / 2)
                        wake_up_all(&rqw->wait);
        }
}

/*
 * Called on completion of a request. Note that it's also called when
 * a request is merged, when the request gets freed.
 */
void wbt_done(struct rq_wb *rwb, struct blk_issue_stat *stat)
{
        if (!rwb)
                return;

        if (!wbt_is_tracked(stat)) {
                if (rwb->sync_cookie == stat) {
                        rwb->sync_issue = 0;
                        rwb->sync_cookie = NULL;
                }

                if (wbt_is_read(stat))
                        wb_timestamp(rwb, &rwb->last_comp);
        } else {
                WARN_ON_ONCE(stat == rwb->sync_cookie);
                __wbt_done(rwb, wbt_stat_to_mask(stat));
        }
        wbt_clear_state(stat);
}

/*
 * Return true, if we can't increase the depth further by scaling
 */
static bool calc_wb_limits(struct rq_wb *rwb)
{
        unsigned int depth;
        bool ret = false;

        if (!rwb->min_lat_nsec) {
                rwb->wb_max = rwb->wb_normal = rwb->wb_background = 0;
                return false;
        }

        /*
         * For QD=1 devices, this is a special case. It's important for those
         * to have one request ready when one completes, so force a depth of
         * 2 for those devices. On the backend, it'll be a depth of 1 anyway,
         * since the device can't have more than that in flight. If we're
         * scaling down, then keep a setting of 1/1/1.
         */
        if (rwb->queue_depth == 1) {
                if (rwb->scale_step > 0)
                        rwb->wb_max = rwb->wb_normal = 1;
                else {
                        rwb->wb_max = rwb->wb_normal = 2;
                        ret = true;
                }
                rwb->wb_background = 1;
        } else {
                /*
                 * scale_step == 0 is our default state. If we have suffered
                 * latency spikes, step will be > 0, and we shrink the
                 * allowed write depths. If step is < 0, we're only doing
                 * writes, and we allow a temporarily higher depth to
                 * increase performance.
                 */
                depth = min_t(unsigned int, RWB_DEF_DEPTH, rwb->queue_depth);
                if (rwb->scale_step > 0)
                        depth = 1 + ((depth - 1) >> min(31, rwb->scale_step));
                else if (rwb->scale_step < 0) {
                        unsigned int maxd = 3 * rwb->queue_depth / 4;

                        depth = 1 + ((depth - 1) << -rwb->scale_step);
                        if (depth > maxd) {
                                depth = maxd;
                                ret = true;
                        }
                }

                /*
                 * Set our max/normal/bg queue depths based on how far
                 * we have scaled down (->scale_step).
                 */
                rwb->wb_max = depth;
                rwb->wb_normal = (rwb->wb_max + 1) / 2;
                rwb->wb_background = (rwb->wb_max + 3) / 4;
        }

        return ret;
}

static inline bool stat_sample_valid(struct blk_rq_stat *stat)
{
        /*
         * We need at least one read sample, and a minimum of
         * RWB_MIN_WRITE_SAMPLES. We require some write samples to know
         * that it's writes impacting us, and not just some sole read on
         * a device that is in a lower power state.
         */
        return (stat[READ].nr_samples >= 1 &&
                stat[WRITE].nr_samples >= RWB_MIN_WRITE_SAMPLES);
}

static u64 rwb_sync_issue_lat(struct rq_wb *rwb)
{
        u64 now, issue = READ_ONCE(rwb->sync_issue);

        if (!issue || !rwb->sync_cookie)
                return 0;

        now = ktime_to_ns(ktime_get());
        return now - issue;
}

enum {
        LAT_OK = 1,
        LAT_UNKNOWN,
        LAT_UNKNOWN_WRITES,
        LAT_EXCEEDED,
};

static int latency_exceeded(struct rq_wb *rwb, struct blk_rq_stat *stat)
{
        struct backing_dev_info *bdi = rwb->queue->backing_dev_info;
        u64 thislat;

        /*
         * If our stored sync issue exceeds the window size, or it
         * exceeds our min target AND we haven't logged any entries,
         * flag the latency as exceeded. wbt works off completion latencies,
         * but for a flooded device, a single sync IO can take a long time
         * to complete after being issued. If this time exceeds our
         * monitoring window AND we didn't see any other completions in that
         * window, then count that sync IO as a violation of the latency.
         */
        thislat = rwb_sync_issue_lat(rwb);
        if (thislat > rwb->cur_win_nsec ||
            (thislat > rwb->min_lat_nsec && !stat[READ].nr_samples)) {
                trace_wbt_lat(bdi, thislat);
                return LAT_EXCEEDED;
        }

        /*
         * No read/write mix, if stat isn't valid
         */
        if (!stat_sample_valid(stat)) {
                /*
                 * If we had writes in this stat window and the window is
                 * current, we're only doing writes. If a task recently
                 * waited or still has writes in flights, consider us doing
                 * just writes as well.
                 */
                if (stat[WRITE].nr_samples || wb_recent_wait(rwb) ||
                    wbt_inflight(rwb))
                        return LAT_UNKNOWN_WRITES;
                return LAT_UNKNOWN;
        }

        /*
         * If the 'min' latency exceeds our target, step down.
         */
        if (stat[READ].min > rwb->min_lat_nsec) {
                trace_wbt_lat(bdi, stat[READ].min);
                trace_wbt_stat(bdi, stat);
                return LAT_EXCEEDED;
        }

        if (rwb->scale_step)
                trace_wbt_stat(bdi, stat);

        return LAT_OK;
}

static void rwb_trace_step(struct rq_wb *rwb, const char *msg)
{
        struct backing_dev_info *bdi = rwb->queue->backing_dev_info;

        trace_wbt_step(bdi, msg, rwb->scale_step, rwb->cur_win_nsec,
                        rwb->wb_background, rwb->wb_normal, rwb->wb_max);
}

static void scale_up(struct rq_wb *rwb)
{
        /*
         * Hit max in previous round, stop here
         */
        if (rwb->scaled_max)
                return;

        rwb->scale_step--;
        rwb->unknown_cnt = 0;

        rwb->scaled_max = calc_wb_limits(rwb);

        rwb_wake_all(rwb);

        rwb_trace_step(rwb, "step up");
}

/*
 * Scale rwb down. If 'hard_throttle' is set, do it quicker, since we
 * had a latency violation.
 */
static void scale_down(struct rq_wb *rwb, bool hard_throttle)
{
        /*
         * Stop scaling down when we've hit the limit. This also prevents
         * ->scale_step from going to crazy values, if the device can't
         * keep up.
         */
        if (rwb->wb_max == 1)
                return;

        if (rwb->scale_step < 0 && hard_throttle)
                rwb->scale_step = 0;
        else
                rwb->scale_step++;

        rwb->scaled_max = false;
        rwb->unknown_cnt = 0;
        calc_wb_limits(rwb);
        rwb_trace_step(rwb, "step down");
}

static void rwb_arm_timer(struct rq_wb *rwb)
{
        if (rwb->scale_step > 0) {
                /*
                 * We should speed this up, using some variant of a fast
                 * integer inverse square root calculation. Since we only do
                 * this for every window expiration, it's not a huge deal,
                 * though.
                 */
                rwb->cur_win_nsec = div_u64(rwb->win_nsec << 4,
                                        int_sqrt((rwb->scale_step + 1) << 8));
        } else {
                /*
                 * For step < 0, we don't want to increase/decrease the
                 * window size.
                 */
                rwb->cur_win_nsec = rwb->win_nsec;
        }

        blk_stat_activate_nsecs(rwb->cb, rwb->cur_win_nsec);
}

static void wb_timer_fn(struct blk_stat_callback *cb)
{
        struct rq_wb *rwb = cb->data;
        unsigned int inflight = wbt_inflight(rwb);
        int status;

        status = latency_exceeded(rwb, cb->stat);

        trace_wbt_timer(rwb->queue->backing_dev_info, status, rwb->scale_step,
                        inflight);

        /*
         * If we exceeded the latency target, step down. If we did not,
         * step one level up. If we don't know enough to say either exceeded
         * or ok, then don't do anything.
         */
        switch (status) {
        case LAT_EXCEEDED:
                scale_down(rwb, true);
                break;
        case LAT_OK:
                scale_up(rwb);
                break;
        case LAT_UNKNOWN_WRITES:
                /*
                 * We started a the center step, but don't have a valid
                 * read/write sample, but we do have writes going on.
                 * Allow step to go negative, to increase write perf.
                 */
                scale_up(rwb);
                break;
        case LAT_UNKNOWN:
                if (++rwb->unknown_cnt < RWB_UNKNOWN_BUMP)
                        break;
                /*
                 * We get here when previously scaled reduced depth, and we
                 * currently don't have a valid read/write sample. For that
                 * case, slowly return to center state (step == 0).
                 */
                if (rwb->scale_step > 0)
                        scale_up(rwb);
                else if (rwb->scale_step < 0)
                        scale_down(rwb, false);
                break;
        default:
                break;
        }

        /*
         * Re-arm timer, if we have IO in flight
         */
        if (rwb->scale_step || inflight)
                rwb_arm_timer(rwb);
}

void wbt_update_limits(struct rq_wb *rwb)
{
        rwb->scale_step = 0;
        rwb->scaled_max = false;
        calc_wb_limits(rwb);

        rwb_wake_all(rwb);
}

static bool close_io(struct rq_wb *rwb)
{
        const unsigned long now = jiffies;

        return time_before(now, rwb->last_issue + HZ / 10) ||
                time_before(now, rwb->last_comp + HZ / 10);
}

#define REQ_HIPRIO      (REQ_SYNC | REQ_META | REQ_PRIO)

static inline unsigned int get_limit(struct rq_wb *rwb, unsigned long rw)
{
        unsigned int limit;

        /*
         * At this point we know it's a buffered write. If this is
         * kswapd trying to free memory, or REQ_SYNC is set, then
         * it's WB_SYNC_ALL writeback, and we'll use the max limit for
         * that. If the write is marked as a background write, then use
         * the idle limit, or go to normal if we haven't had competing
         * IO for a bit.
         */
        if ((rw & REQ_HIPRIO) || wb_recent_wait(rwb) || current_is_kswapd())
                limit = rwb->wb_max;
        else if ((rw & REQ_BACKGROUND) || close_io(rwb)) {
                /*
                 * If less than 100ms since we completed unrelated IO,
                 * limit us to half the depth for background writeback.
                 */
                limit = rwb->wb_background;
        } else
                limit = rwb->wb_normal;

        return limit;
}

static inline bool may_queue(struct rq_wb *rwb, struct rq_wait *rqw,
                             wait_queue_entry_t *wait, unsigned long rw)
{
        /*
         * inc it here even if disabled, since we'll dec it at completion.
         * this only happens if the task was sleeping in __wbt_wait(),
         * and someone turned it off at the same time.
         */
        if (!rwb_enabled(rwb)) {
                atomic_inc(&rqw->inflight);
                return true;
        }

        /*
         * If the waitqueue is already active and we are not the next
         * in line to be woken up, wait for our turn.
         */
        if (waitqueue_active(&rqw->wait) &&
            rqw->wait.head.next != &wait->entry)
                return false;

        return atomic_inc_below(&rqw->inflight, get_limit(rwb, rw));
}

/*
 * Block if we will exceed our limit, or if we are currently waiting for
 * the timer to kick off queuing again.
 */
static void __wbt_wait(struct rq_wb *rwb, unsigned long rw, spinlock_t *lock)
        __releases(lock)
        __acquires(lock)
{
        struct rq_wait *rqw = get_rq_wait(rwb, current_is_kswapd());
        DEFINE_WAIT(wait);

        if (may_queue(rwb, rqw, &wait, rw))
                return;

        do {
                prepare_to_wait_exclusive(&rqw->wait, &wait,
                                                TASK_UNINTERRUPTIBLE);

                if (may_queue(rwb, rqw, &wait, rw))
                        break;

                if (lock) {
                        spin_unlock_irq(lock);
                        io_schedule();
                        spin_lock_irq(lock);
                } else
                        io_schedule();
        } while (1);

        finish_wait(&rqw->wait, &wait);
}

static inline bool wbt_should_throttle(struct rq_wb *rwb, struct bio *bio)
{
        const int op = bio_op(bio);

        /*
         * If not a WRITE, do nothing
         */
        if (op != REQ_OP_WRITE)
                return false;

        /*
         * Don't throttle WRITE_ODIRECT
         */
        if ((bio->bi_opf & (REQ_SYNC | REQ_IDLE)) == (REQ_SYNC | REQ_IDLE))
                return false;

        return true;
}

/*
 * Returns true if the IO request should be accounted, false if not.
 * May sleep, if we have exceeded the writeback limits. Caller can pass
 * in an irq held spinlock, if it holds one when calling this function.
 * If we do sleep, we'll release and re-grab it.
 */
enum wbt_flags wbt_wait(struct rq_wb *rwb, struct bio *bio, spinlock_t *lock)
{
        unsigned int ret = 0;

        if (!rwb_enabled(rwb))
                return 0;

        if (bio_op(bio) == REQ_OP_READ)
                ret = WBT_READ;

        if (!wbt_should_throttle(rwb, bio)) {
                if (ret & WBT_READ)
                        wb_timestamp(rwb, &rwb->last_issue);
                return ret;
        }

        __wbt_wait(rwb, bio->bi_opf, lock);

        if (!blk_stat_is_active(rwb->cb))
                rwb_arm_timer(rwb);

        if (current_is_kswapd())
                ret |= WBT_KSWAPD;

        return ret | WBT_TRACKED;
}

void wbt_issue(struct rq_wb *rwb, struct blk_issue_stat *stat)
{
        if (!rwb_enabled(rwb))
                return;

        /*
         * Track sync issue, in case it takes a long time to complete. Allows
         * us to react quicker, if a sync IO takes a long time to complete.
         * Note that this is just a hint. 'stat' can go away when the
         * request completes, so it's important we never dereference it. We
         * only use the address to compare with, which is why we store the
         * sync_issue time locally.
         */
        if (wbt_is_read(stat) && !rwb->sync_issue) {
                rwb->sync_cookie = stat;
                rwb->sync_issue = blk_stat_time(stat);
        }
}

void wbt_requeue(struct rq_wb *rwb, struct blk_issue_stat *stat)
{
        if (!rwb_enabled(rwb))
                return;
        if (stat == rwb->sync_cookie) {
                rwb->sync_issue = 0;
                rwb->sync_cookie = NULL;
        }
}

void wbt_set_queue_depth(struct rq_wb *rwb, unsigned int depth)
{
        if (rwb) {
                rwb->queue_depth = depth;
                wbt_update_limits(rwb);
        }
}

void wbt_set_write_cache(struct rq_wb *rwb, bool write_cache_on)
{
        if (rwb)
                rwb->wc = write_cache_on;
}

/*
 * Disable wbt, if enabled by default.
 */
void wbt_disable_default(struct request_queue *q)
{
        struct rq_wb *rwb = q->rq_wb;

        if (rwb && rwb->enable_state == WBT_STATE_ON_DEFAULT)
                wbt_exit(q);
}
EXPORT_SYMBOL_GPL(wbt_disable_default);

/*
 * Enable wbt if defaults are configured that way
 */
void wbt_enable_default(struct request_queue *q)
{
        /* Throttling already enabled? */
        if (q->rq_wb)
                return;

        /* Queue not registered? Maybe shutting down... */
        if (!test_bit(QUEUE_FLAG_REGISTERED, &q->queue_flags))
                return;

        if ((q->mq_ops && IS_ENABLED(CONFIG_BLK_WBT_MQ)) ||
            (q->request_fn && IS_ENABLED(CONFIG_BLK_WBT_SQ)))
                wbt_init(q);
}
EXPORT_SYMBOL_GPL(wbt_enable_default);

u64 wbt_default_latency_nsec(struct request_queue *q)
{
        /*
         * We default to 2msec for non-rotational storage, and 75msec
         * for rotational storage.
         */
        if (blk_queue_nonrot(q))
                return 2000000ULL;
        else
                return 75000000ULL;
}

static int wbt_data_dir(const struct request *rq)
{
        return rq_data_dir(rq);
}

int wbt_init(struct request_queue *q)
{
        struct rq_wb *rwb;
        int i;

        BUILD_BUG_ON(WBT_NR_BITS > BLK_STAT_RES_BITS);

        rwb = kzalloc(sizeof(*rwb), GFP_KERNEL);
        if (!rwb)
                return -ENOMEM;

        rwb->cb = blk_stat_alloc_callback(wb_timer_fn, wbt_data_dir, 2, rwb);
        if (!rwb->cb) {
                kfree(rwb);
                return -ENOMEM;
        }

        for (i = 0; i < WBT_NUM_RWQ; i++) {
                atomic_set(&rwb->rq_wait[i].inflight, 0);
                init_waitqueue_head(&rwb->rq_wait[i].wait);
        }

        rwb->last_comp = rwb->last_issue = jiffies;
        rwb->queue = q;
        rwb->win_nsec = RWB_WINDOW_NSEC;
        rwb->enable_state = WBT_STATE_ON_DEFAULT;
        wbt_update_limits(rwb);

        /*
         * Assign rwb and add the stats callback.
         */
        q->rq_wb = rwb;
        blk_stat_add_callback(q, rwb->cb);

        rwb->min_lat_nsec = wbt_default_latency_nsec(q);

        wbt_set_queue_depth(rwb, blk_queue_depth(q));
        wbt_set_write_cache(rwb, test_bit(QUEUE_FLAG_WC, &q->queue_flags));

        return 0;
}

void wbt_exit(struct request_queue *q)
{
        struct rq_wb *rwb = q->rq_wb;

        if (rwb) {
                blk_stat_remove_callback(q, rwb->cb);
                blk_stat_free_callback(rwb->cb);
                q->rq_wb = NULL;
                kfree(rwb);
        }
}