arm64: Don't use is_module_addr in setting page attributes

[linux-2.6/btrfs-unstable.git] / arch / x86 / xen / setup.c

/*
 * Machine specific setup for xen
 *
 * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
 */

#include <linux/module.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/memblock.h>
#include <linux/cpuidle.h>
#include <linux/cpufreq.h>

#include <asm/elf.h>
#include <asm/vdso.h>
#include <asm/e820.h>
#include <asm/setup.h>
#include <asm/acpi.h>
#include <asm/numa.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>

#include <xen/xen.h>
#include <xen/page.h>
#include <xen/interface/callback.h>
#include <xen/interface/memory.h>
#include <xen/interface/physdev.h>
#include <xen/features.h>
#include "xen-ops.h"
#include "vdso.h"
#include "p2m.h"
#include "mmu.h"

/* Amount of extra memory space we add to the e820 ranges */
struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata;

/* Number of pages released from the initial allocation. */
unsigned long xen_released_pages;

/*
 * Buffer used to remap identity mapped pages. We only need the virtual space.
 * The physical page behind this address is remapped as needed to different
 * buffer pages.
 */
#define REMAP_SIZE      (P2M_PER_PAGE - 3)
static struct {
        unsigned long   next_area_mfn;
        unsigned long   target_pfn;
        unsigned long   size;
        unsigned long   mfns[REMAP_SIZE];
} xen_remap_buf __initdata __aligned(PAGE_SIZE);
static unsigned long xen_remap_mfn __initdata = INVALID_P2M_ENTRY;

/* 
 * The maximum amount of extra memory compared to the base size.  The
 * main scaling factor is the size of struct page.  At extreme ratios
 * of base:extra, all the base memory can be filled with page
 * structures for the extra memory, leaving no space for anything
 * else.
 * 
 * 10x seems like a reasonable balance between scaling flexibility and
 * leaving a practically usable system.
 */
#define EXTRA_MEM_RATIO         (10)

static void __init xen_add_extra_mem(phys_addr_t start, phys_addr_t size)
{
        int i;

        for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
                /* Add new region. */
                if (xen_extra_mem[i].size == 0) {
                        xen_extra_mem[i].start = start;
                        xen_extra_mem[i].size  = size;
                        break;
                }
                /* Append to existing region. */
                if (xen_extra_mem[i].start + xen_extra_mem[i].size == start) {
                        xen_extra_mem[i].size += size;
                        break;
                }
        }
        if (i == XEN_EXTRA_MEM_MAX_REGIONS)
                printk(KERN_WARNING "Warning: not enough extra memory regions\n");

        memblock_reserve(start, size);
}

static void __init xen_del_extra_mem(phys_addr_t start, phys_addr_t size)
{
        int i;
        phys_addr_t start_r, size_r;

        for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
                start_r = xen_extra_mem[i].start;
                size_r = xen_extra_mem[i].size;

                /* Start of region. */
                if (start_r == start) {
                        BUG_ON(size > size_r);
                        xen_extra_mem[i].start += size;
                        xen_extra_mem[i].size -= size;
                        break;
                }
                /* End of region. */
                if (start_r + size_r == start + size) {
                        BUG_ON(size > size_r);
                        xen_extra_mem[i].size -= size;
                        break;
                }
                /* Mid of region. */
                if (start > start_r && start < start_r + size_r) {
                        BUG_ON(start + size > start_r + size_r);
                        xen_extra_mem[i].size = start - start_r;
                        /* Calling memblock_reserve() again is okay. */
                        xen_add_extra_mem(start + size, start_r + size_r -
                                          (start + size));
                        break;
                }
        }
        memblock_free(start, size);
}

/*
 * Called during boot before the p2m list can take entries beyond the
 * hypervisor supplied p2m list. Entries in extra mem are to be regarded as
 * invalid.
 */
unsigned long __ref xen_chk_extra_mem(unsigned long pfn)
{
        int i;
        phys_addr_t addr = PFN_PHYS(pfn);

        for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
                if (addr >= xen_extra_mem[i].start &&
                    addr < xen_extra_mem[i].start + xen_extra_mem[i].size)
                        return INVALID_P2M_ENTRY;
        }

        return IDENTITY_FRAME(pfn);
}

/*
 * Mark all pfns of extra mem as invalid in p2m list.
 */
void __init xen_inv_extra_mem(void)
{
        unsigned long pfn, pfn_s, pfn_e;
        int i;

        for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
                if (!xen_extra_mem[i].size)
                        continue;
                pfn_s = PFN_DOWN(xen_extra_mem[i].start);
                pfn_e = PFN_UP(xen_extra_mem[i].start + xen_extra_mem[i].size);
                for (pfn = pfn_s; pfn < pfn_e; pfn++)
                        set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
        }
}

/*
 * Finds the next RAM pfn available in the E820 map after min_pfn.
 * This function updates min_pfn with the pfn found and returns
 * the size of that range or zero if not found.
 */
static unsigned long __init xen_find_pfn_range(
        const struct e820entry *list, size_t map_size,
        unsigned long *min_pfn)
{
        const struct e820entry *entry;
        unsigned int i;
        unsigned long done = 0;

        for (i = 0, entry = list; i < map_size; i++, entry++) {
                unsigned long s_pfn;
                unsigned long e_pfn;

                if (entry->type != E820_RAM)
                        continue;

                e_pfn = PFN_DOWN(entry->addr + entry->size);

                /* We only care about E820 after this */
                if (e_pfn < *min_pfn)
                        continue;

                s_pfn = PFN_UP(entry->addr);

                /* If min_pfn falls within the E820 entry, we want to start
                 * at the min_pfn PFN.
                 */
                if (s_pfn <= *min_pfn) {
                        done = e_pfn - *min_pfn;
                } else {
                        done = e_pfn - s_pfn;
                        *min_pfn = s_pfn;
                }
                break;
        }

        return done;
}

static int __init xen_free_mfn(unsigned long mfn)
{
        struct xen_memory_reservation reservation = {
                .address_bits = 0,
                .extent_order = 0,
                .domid        = DOMID_SELF
        };

        set_xen_guest_handle(reservation.extent_start, &mfn);
        reservation.nr_extents = 1;

        return HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation);
}

/*
 * This releases a chunk of memory and then does the identity map. It's used
 * as a fallback if the remapping fails.
 */
static void __init xen_set_identity_and_release_chunk(unsigned long start_pfn,
        unsigned long end_pfn, unsigned long nr_pages, unsigned long *released)
{
        unsigned long pfn, end;
        int ret;

        WARN_ON(start_pfn > end_pfn);

        /* Release pages first. */
        end = min(end_pfn, nr_pages);
        for (pfn = start_pfn; pfn < end; pfn++) {
                unsigned long mfn = pfn_to_mfn(pfn);

                /* Make sure pfn exists to start with */
                if (mfn == INVALID_P2M_ENTRY || mfn_to_pfn(mfn) != pfn)
                        continue;

                ret = xen_free_mfn(mfn);
                WARN(ret != 1, "Failed to release pfn %lx err=%d\n", pfn, ret);

                if (ret == 1) {
                        (*released)++;
                        if (!__set_phys_to_machine(pfn, INVALID_P2M_ENTRY))
                                break;
                } else
                        break;
        }

        set_phys_range_identity(start_pfn, end_pfn);
}

/*
 * Helper function to update the p2m and m2p tables and kernel mapping.
 */
static void __init xen_update_mem_tables(unsigned long pfn, unsigned long mfn)
{
        struct mmu_update update = {
                .ptr = ((uint64_t)mfn << PAGE_SHIFT) | MMU_MACHPHYS_UPDATE,
                .val = pfn
        };

        /* Update p2m */
        if (!set_phys_to_machine(pfn, mfn)) {
                WARN(1, "Failed to set p2m mapping for pfn=%ld mfn=%ld\n",
                     pfn, mfn);
                BUG();
        }

        /* Update m2p */
        if (HYPERVISOR_mmu_update(&update, 1, NULL, DOMID_SELF) < 0) {
                WARN(1, "Failed to set m2p mapping for mfn=%ld pfn=%ld\n",
                     mfn, pfn);
                BUG();
        }

        /* Update kernel mapping, but not for highmem. */
        if (pfn >= PFN_UP(__pa(high_memory - 1)))
                return;

        if (HYPERVISOR_update_va_mapping((unsigned long)__va(pfn << PAGE_SHIFT),
                                         mfn_pte(mfn, PAGE_KERNEL), 0)) {
                WARN(1, "Failed to update kernel mapping for mfn=%ld pfn=%ld\n",
                      mfn, pfn);
                BUG();
        }
}

/*
 * This function updates the p2m and m2p tables with an identity map from
 * start_pfn to start_pfn+size and prepares remapping the underlying RAM of the
 * original allocation at remap_pfn. The information needed for remapping is
 * saved in the memory itself to avoid the need for allocating buffers. The
 * complete remap information is contained in a list of MFNs each containing
 * up to REMAP_SIZE MFNs and the start target PFN for doing the remap.
 * This enables us to preserve the original mfn sequence while doing the
 * remapping at a time when the memory management is capable of allocating
 * virtual and physical memory in arbitrary amounts, see 'xen_remap_memory' and
 * its callers.
 */
static void __init xen_do_set_identity_and_remap_chunk(
        unsigned long start_pfn, unsigned long size, unsigned long remap_pfn)
{
        unsigned long buf = (unsigned long)&xen_remap_buf;
        unsigned long mfn_save, mfn;
        unsigned long ident_pfn_iter, remap_pfn_iter;
        unsigned long ident_end_pfn = start_pfn + size;
        unsigned long left = size;
        unsigned int i, chunk;

        WARN_ON(size == 0);

        BUG_ON(xen_feature(XENFEAT_auto_translated_physmap));

        mfn_save = virt_to_mfn(buf);

        for (ident_pfn_iter = start_pfn, remap_pfn_iter = remap_pfn;
             ident_pfn_iter < ident_end_pfn;
             ident_pfn_iter += REMAP_SIZE, remap_pfn_iter += REMAP_SIZE) {
                chunk = (left < REMAP_SIZE) ? left : REMAP_SIZE;

                /* Map first pfn to xen_remap_buf */
                mfn = pfn_to_mfn(ident_pfn_iter);
                set_pte_mfn(buf, mfn, PAGE_KERNEL);

                /* Save mapping information in page */
                xen_remap_buf.next_area_mfn = xen_remap_mfn;
                xen_remap_buf.target_pfn = remap_pfn_iter;
                xen_remap_buf.size = chunk;
                for (i = 0; i < chunk; i++)
                        xen_remap_buf.mfns[i] = pfn_to_mfn(ident_pfn_iter + i);

                /* Put remap buf into list. */
                xen_remap_mfn = mfn;

                /* Set identity map */
                set_phys_range_identity(ident_pfn_iter, ident_pfn_iter + chunk);

                left -= chunk;
        }

        /* Restore old xen_remap_buf mapping */
        set_pte_mfn(buf, mfn_save, PAGE_KERNEL);
}

/*
 * This function takes a contiguous pfn range that needs to be identity mapped
 * and:
 *
 *  1) Finds a new range of pfns to use to remap based on E820 and remap_pfn.
 *  2) Calls the do_ function to actually do the mapping/remapping work.
 *
 * The goal is to not allocate additional memory but to remap the existing
 * pages. In the case of an error the underlying memory is simply released back
 * to Xen and not remapped.
 */
static unsigned long __init xen_set_identity_and_remap_chunk(
        const struct e820entry *list, size_t map_size, unsigned long start_pfn,
        unsigned long end_pfn, unsigned long nr_pages, unsigned long remap_pfn,
        unsigned long *released, unsigned long *remapped)
{
        unsigned long pfn;
        unsigned long i = 0;
        unsigned long n = end_pfn - start_pfn;

        while (i < n) {
                unsigned long cur_pfn = start_pfn + i;
                unsigned long left = n - i;
                unsigned long size = left;
                unsigned long remap_range_size;

                /* Do not remap pages beyond the current allocation */
                if (cur_pfn >= nr_pages) {
                        /* Identity map remaining pages */
                        set_phys_range_identity(cur_pfn, cur_pfn + size);
                        break;
                }
                if (cur_pfn + size > nr_pages)
                        size = nr_pages - cur_pfn;

                remap_range_size = xen_find_pfn_range(list, map_size,
                                                      &remap_pfn);
                if (!remap_range_size) {
                        pr_warning("Unable to find available pfn range, not remapping identity pages\n");
                        xen_set_identity_and_release_chunk(cur_pfn,
                                cur_pfn + left, nr_pages, released);
                        break;
                }
                /* Adjust size to fit in current e820 RAM region */
                if (size > remap_range_size)
                        size = remap_range_size;

                xen_do_set_identity_and_remap_chunk(cur_pfn, size, remap_pfn);

                /* Update variables to reflect new mappings. */
                i += size;
                remap_pfn += size;
                *remapped += size;
        }

        /*
         * If the PFNs are currently mapped, the VA mapping also needs
         * to be updated to be 1:1.
         */
        for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++)
                (void)HYPERVISOR_update_va_mapping(
                        (unsigned long)__va(pfn << PAGE_SHIFT),
                        mfn_pte(pfn, PAGE_KERNEL_IO), 0);

        return remap_pfn;
}

static void __init xen_set_identity_and_remap(
        const struct e820entry *list, size_t map_size, unsigned long nr_pages,
        unsigned long *released, unsigned long *remapped)
{
        phys_addr_t start = 0;
        unsigned long last_pfn = nr_pages;
        const struct e820entry *entry;
        unsigned long num_released = 0;
        unsigned long num_remapped = 0;
        int i;

        /*
         * Combine non-RAM regions and gaps until a RAM region (or the
         * end of the map) is reached, then set the 1:1 map and
         * remap the memory in those non-RAM regions.
         *
         * The combined non-RAM regions are rounded to a whole number
         * of pages so any partial pages are accessible via the 1:1
         * mapping.  This is needed for some BIOSes that put (for
         * example) the DMI tables in a reserved region that begins on
         * a non-page boundary.
         */
        for (i = 0, entry = list; i < map_size; i++, entry++) {
                phys_addr_t end = entry->addr + entry->size;
                if (entry->type == E820_RAM || i == map_size - 1) {
                        unsigned long start_pfn = PFN_DOWN(start);
                        unsigned long end_pfn = PFN_UP(end);

                        if (entry->type == E820_RAM)
                                end_pfn = PFN_UP(entry->addr);

                        if (start_pfn < end_pfn)
                                last_pfn = xen_set_identity_and_remap_chunk(
                                                list, map_size, start_pfn,
                                                end_pfn, nr_pages, last_pfn,
                                                &num_released, &num_remapped);
                        start = end;
                }
        }

        *released = num_released;
        *remapped = num_remapped;

        pr_info("Released %ld page(s)\n", num_released);
}

/*
 * Remap the memory prepared in xen_do_set_identity_and_remap_chunk().
 * The remap information (which mfn remap to which pfn) is contained in the
 * to be remapped memory itself in a linked list anchored at xen_remap_mfn.
 * This scheme allows to remap the different chunks in arbitrary order while
 * the resulting mapping will be independant from the order.
 */
void __init xen_remap_memory(void)
{
        unsigned long buf = (unsigned long)&xen_remap_buf;
        unsigned long mfn_save, mfn, pfn;
        unsigned long remapped = 0;
        unsigned int i;
        unsigned long pfn_s = ~0UL;
        unsigned long len = 0;

        mfn_save = virt_to_mfn(buf);

        while (xen_remap_mfn != INVALID_P2M_ENTRY) {
                /* Map the remap information */
                set_pte_mfn(buf, xen_remap_mfn, PAGE_KERNEL);

                BUG_ON(xen_remap_mfn != xen_remap_buf.mfns[0]);

                pfn = xen_remap_buf.target_pfn;
                for (i = 0; i < xen_remap_buf.size; i++) {
                        mfn = xen_remap_buf.mfns[i];
                        xen_update_mem_tables(pfn, mfn);
                        remapped++;
                        pfn++;
                }
                if (pfn_s == ~0UL || pfn == pfn_s) {
                        pfn_s = xen_remap_buf.target_pfn;
                        len += xen_remap_buf.size;
                } else if (pfn_s + len == xen_remap_buf.target_pfn) {
                        len += xen_remap_buf.size;
                } else {
                        xen_del_extra_mem(PFN_PHYS(pfn_s), PFN_PHYS(len));
                        pfn_s = xen_remap_buf.target_pfn;
                        len = xen_remap_buf.size;
                }

                mfn = xen_remap_mfn;
                xen_remap_mfn = xen_remap_buf.next_area_mfn;
        }

        if (pfn_s != ~0UL && len)
                xen_del_extra_mem(PFN_PHYS(pfn_s), PFN_PHYS(len));

        set_pte_mfn(buf, mfn_save, PAGE_KERNEL);

        pr_info("Remapped %ld page(s)\n", remapped);
}

static unsigned long __init xen_get_max_pages(void)
{
        unsigned long max_pages = MAX_DOMAIN_PAGES;
        domid_t domid = DOMID_SELF;
        int ret;

        /*
         * For the initial domain we use the maximum reservation as
         * the maximum page.
         *
         * For guest domains the current maximum reservation reflects
         * the current maximum rather than the static maximum. In this
         * case the e820 map provided to us will cover the static
         * maximum region.
         */
        if (xen_initial_domain()) {
                ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
                if (ret > 0)
                        max_pages = ret;
        }

        return min(max_pages, MAX_DOMAIN_PAGES);
}

static void __init xen_align_and_add_e820_region(phys_addr_t start,
                                                 phys_addr_t size, int type)
{
        phys_addr_t end = start + size;

        /* Align RAM regions to page boundaries. */
        if (type == E820_RAM) {
                start = PAGE_ALIGN(start);
                end &= ~((phys_addr_t)PAGE_SIZE - 1);
        }

        e820_add_region(start, end - start, type);
}

static void __init xen_ignore_unusable(struct e820entry *list, size_t map_size)
{
        struct e820entry *entry;
        unsigned int i;

        for (i = 0, entry = list; i < map_size; i++, entry++) {
                if (entry->type == E820_UNUSABLE)
                        entry->type = E820_RAM;
        }
}

/**
 * machine_specific_memory_setup - Hook for machine specific memory setup.
 **/
char * __init xen_memory_setup(void)
{
        static struct e820entry map[E820MAX] __initdata;

        unsigned long max_pfn = xen_start_info->nr_pages;
        phys_addr_t mem_end;
        int rc;
        struct xen_memory_map memmap;
        unsigned long max_pages;
        unsigned long extra_pages = 0;
        unsigned long remapped_pages;
        int i;
        int op;

        max_pfn = min(MAX_DOMAIN_PAGES, max_pfn);
        mem_end = PFN_PHYS(max_pfn);

        memmap.nr_entries = E820MAX;
        set_xen_guest_handle(memmap.buffer, map);

        op = xen_initial_domain() ?
                XENMEM_machine_memory_map :
                XENMEM_memory_map;
        rc = HYPERVISOR_memory_op(op, &memmap);
        if (rc == -ENOSYS) {
                BUG_ON(xen_initial_domain());
                memmap.nr_entries = 1;
                map[0].addr = 0ULL;
                map[0].size = mem_end;
                /* 8MB slack (to balance backend allocations). */
                map[0].size += 8ULL << 20;
                map[0].type = E820_RAM;
                rc = 0;
        }
        BUG_ON(rc);
        BUG_ON(memmap.nr_entries == 0);

        /*
         * Xen won't allow a 1:1 mapping to be created to UNUSABLE
         * regions, so if we're using the machine memory map leave the
         * region as RAM as it is in the pseudo-physical map.
         *
         * UNUSABLE regions in domUs are not handled and will need
         * a patch in the future.
         */
        if (xen_initial_domain())
                xen_ignore_unusable(map, memmap.nr_entries);

        /* Make sure the Xen-supplied memory map is well-ordered. */
        sanitize_e820_map(map, memmap.nr_entries, &memmap.nr_entries);

        max_pages = xen_get_max_pages();
        if (max_pages > max_pfn)
                extra_pages += max_pages - max_pfn;

        /*
         * Set identity map on non-RAM pages and prepare remapping the
         * underlying RAM.
         */
        xen_set_identity_and_remap(map, memmap.nr_entries, max_pfn,
                                   &xen_released_pages, &remapped_pages);

        extra_pages += xen_released_pages;
        extra_pages += remapped_pages;

        /*
         * Clamp the amount of extra memory to a EXTRA_MEM_RATIO
         * factor the base size.  On non-highmem systems, the base
         * size is the full initial memory allocation; on highmem it
         * is limited to the max size of lowmem, so that it doesn't
         * get completely filled.
         *
         * In principle there could be a problem in lowmem systems if
         * the initial memory is also very large with respect to
         * lowmem, but we won't try to deal with that here.
         */
        extra_pages = min(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)),
                          extra_pages);
        i = 0;
        while (i < memmap.nr_entries) {
                phys_addr_t addr = map[i].addr;
                phys_addr_t size = map[i].size;
                u32 type = map[i].type;

                if (type == E820_RAM) {
                        if (addr < mem_end) {
                                size = min(size, mem_end - addr);
                        } else if (extra_pages) {
                                size = min(size, PFN_PHYS(extra_pages));
                                extra_pages -= PFN_DOWN(size);
                                xen_add_extra_mem(addr, size);
                                xen_max_p2m_pfn = PFN_DOWN(addr + size);
                        } else
                                type = E820_UNUSABLE;
                }

                xen_align_and_add_e820_region(addr, size, type);

                map[i].addr += size;
                map[i].size -= size;
                if (map[i].size == 0)
                        i++;
        }

        /*
         * Set the rest as identity mapped, in case PCI BARs are
         * located here.
         *
         * PFNs above MAX_P2M_PFN are considered identity mapped as
         * well.
         */
        set_phys_range_identity(map[i-1].addr / PAGE_SIZE, ~0ul);

        /*
         * In domU, the ISA region is normal, usable memory, but we
         * reserve ISA memory anyway because too many things poke
         * about in there.
         */
        e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
                        E820_RESERVED);

        /*
         * Reserve Xen bits:
         *  - mfn_list
         *  - xen_start_info
         * See comment above "struct start_info" in <xen/interface/xen.h>
         * We tried to make the the memblock_reserve more selective so
         * that it would be clear what region is reserved. Sadly we ran
         * in the problem wherein on a 64-bit hypervisor with a 32-bit
         * initial domain, the pt_base has the cr3 value which is not
         * neccessarily where the pagetable starts! As Jan put it: "
         * Actually, the adjustment turns out to be correct: The page
         * tables for a 32-on-64 dom0 get allocated in the order "first L1",
         * "first L2", "first L3", so the offset to the page table base is
         * indeed 2. When reading xen/include/public/xen.h's comment
         * very strictly, this is not a violation (since there nothing is said
         * that the first thing in the page table space is pointed to by
         * pt_base; I admit that this seems to be implied though, namely
         * do I think that it is implied that the page table space is the
         * range [pt_base, pt_base + nt_pt_frames), whereas that
         * range here indeed is [pt_base - 2, pt_base - 2 + nt_pt_frames),
         * which - without a priori knowledge - the kernel would have
         * difficulty to figure out)." - so lets just fall back to the
         * easy way and reserve the whole region.
         */
        memblock_reserve(__pa(xen_start_info->mfn_list),
                         xen_start_info->pt_base - xen_start_info->mfn_list);

        sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);

        return "Xen";
}

/*
 * Machine specific memory setup for auto-translated guests.
 */
char * __init xen_auto_xlated_memory_setup(void)
{
        static struct e820entry map[E820MAX] __initdata;

        struct xen_memory_map memmap;
        int i;
        int rc;

        memmap.nr_entries = E820MAX;
        set_xen_guest_handle(memmap.buffer, map);

        rc = HYPERVISOR_memory_op(XENMEM_memory_map, &memmap);
        if (rc < 0)
                panic("No memory map (%d)\n", rc);

        sanitize_e820_map(map, ARRAY_SIZE(map), &memmap.nr_entries);

        for (i = 0; i < memmap.nr_entries; i++)
                e820_add_region(map[i].addr, map[i].size, map[i].type);

        memblock_reserve(__pa(xen_start_info->mfn_list),
                         xen_start_info->pt_base - xen_start_info->mfn_list);

        return "Xen";
}

/*
 * Set the bit indicating "nosegneg" library variants should be used.
 * We only need to bother in pure 32-bit mode; compat 32-bit processes
 * can have un-truncated segments, so wrapping around is allowed.
 */
static void __init fiddle_vdso(void)
{
#ifdef CONFIG_X86_32
        /*
         * This could be called before selected_vdso32 is initialized, so
         * just fiddle with both possible images.  vdso_image_32_syscall
         * can't be selected, since it only exists on 64-bit systems.
         */
        u32 *mask;
        mask = vdso_image_32_int80.data +
                vdso_image_32_int80.sym_VDSO32_NOTE_MASK;
        *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
        mask = vdso_image_32_sysenter.data +
                vdso_image_32_sysenter.sym_VDSO32_NOTE_MASK;
        *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
#endif
}

static int register_callback(unsigned type, const void *func)
{
        struct callback_register callback = {
                .type = type,
                .address = XEN_CALLBACK(__KERNEL_CS, func),
                .flags = CALLBACKF_mask_events,
        };

        return HYPERVISOR_callback_op(CALLBACKOP_register, &callback);
}

void xen_enable_sysenter(void)
{
        int ret;
        unsigned sysenter_feature;

#ifdef CONFIG_X86_32
        sysenter_feature = X86_FEATURE_SEP;
#else
        sysenter_feature = X86_FEATURE_SYSENTER32;
#endif

        if (!boot_cpu_has(sysenter_feature))
                return;

        ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
        if(ret != 0)
                setup_clear_cpu_cap(sysenter_feature);
}

void xen_enable_syscall(void)
{
#ifdef CONFIG_X86_64
        int ret;

        ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
        if (ret != 0) {
                printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
                /* Pretty fatal; 64-bit userspace has no other
                   mechanism for syscalls. */
        }

        if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
                ret = register_callback(CALLBACKTYPE_syscall32,
                                        xen_syscall32_target);
                if (ret != 0)
                        setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
        }
#endif /* CONFIG_X86_64 */
}

void __init xen_pvmmu_arch_setup(void)
{
        HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
        HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);

        HYPERVISOR_vm_assist(VMASST_CMD_enable,
                             VMASST_TYPE_pae_extended_cr3);

        if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) ||
            register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
                BUG();

        xen_enable_sysenter();
        xen_enable_syscall();
}

/* This function is not called for HVM domains */
void __init xen_arch_setup(void)
{
        xen_panic_handler_init();
        if (!xen_feature(XENFEAT_auto_translated_physmap))
                xen_pvmmu_arch_setup();

#ifdef CONFIG_ACPI
        if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
                printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
                disable_acpi();
        }
#endif

        memcpy(boot_command_line, xen_start_info->cmd_line,
               MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
               COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);

        /* Set up idle, making sure it calls safe_halt() pvop */
        disable_cpuidle();
        disable_cpufreq();
        WARN_ON(xen_set_default_idle());
        fiddle_vdso();
#ifdef CONFIG_NUMA
        numa_off = 1;
#endif
}