extcon: Use the extcon_set_state_sync() instead of deprecated functions
[linux-2.6/btrfs-unstable.git] / drivers / extcon / extcon-arizona.c
blob56e6c4c7c60d265912a2c2990170a48b616f9bef
1 /*
2 * extcon-arizona.c - Extcon driver Wolfson Arizona devices
4 * Copyright (C) 2012-2014 Wolfson Microelectronics plc
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/i2c.h>
20 #include <linux/slab.h>
21 #include <linux/interrupt.h>
22 #include <linux/err.h>
23 #include <linux/gpio/consumer.h>
24 #include <linux/gpio.h>
25 #include <linux/input.h>
26 #include <linux/platform_device.h>
27 #include <linux/pm_runtime.h>
28 #include <linux/property.h>
29 #include <linux/regulator/consumer.h>
30 #include <linux/extcon.h>
32 #include <sound/soc.h>
34 #include <linux/mfd/arizona/core.h>
35 #include <linux/mfd/arizona/pdata.h>
36 #include <linux/mfd/arizona/registers.h>
37 #include <dt-bindings/mfd/arizona.h>
39 #define ARIZONA_MAX_MICD_RANGE 8
41 #define ARIZONA_MICD_CLAMP_MODE_JDL 0x4
42 #define ARIZONA_MICD_CLAMP_MODE_JDH 0x5
43 #define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
44 #define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb
46 #define ARIZONA_TST_CAP_DEFAULT 0x3
47 #define ARIZONA_TST_CAP_CLAMP 0x1
49 #define ARIZONA_HPDET_MAX 10000
51 #define HPDET_DEBOUNCE 500
52 #define DEFAULT_MICD_TIMEOUT 2000
54 #define QUICK_HEADPHONE_MAX_OHM 3
55 #define MICROPHONE_MIN_OHM 1257
56 #define MICROPHONE_MAX_OHM 30000
58 #define MICD_DBTIME_TWO_READINGS 2
59 #define MICD_DBTIME_FOUR_READINGS 4
61 #define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \
62 ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \
63 ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \
64 ARIZONA_MICD_LVL_7)
66 #define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7)
68 #define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8)
70 struct arizona_extcon_info {
71 struct device *dev;
72 struct arizona *arizona;
73 struct mutex lock;
74 struct regulator *micvdd;
75 struct input_dev *input;
77 u16 last_jackdet;
79 int micd_mode;
80 const struct arizona_micd_config *micd_modes;
81 int micd_num_modes;
83 const struct arizona_micd_range *micd_ranges;
84 int num_micd_ranges;
86 int micd_timeout;
88 bool micd_reva;
89 bool micd_clamp;
91 struct delayed_work hpdet_work;
92 struct delayed_work micd_detect_work;
93 struct delayed_work micd_timeout_work;
95 bool hpdet_active;
96 bool hpdet_done;
97 bool hpdet_retried;
99 int num_hpdet_res;
100 unsigned int hpdet_res[3];
102 bool mic;
103 bool detecting;
104 int jack_flips;
106 int hpdet_ip_version;
108 struct extcon_dev *edev;
110 struct gpio_desc *micd_pol_gpio;
113 static const struct arizona_micd_config micd_default_modes[] = {
114 { ARIZONA_ACCDET_SRC, 1, 0 },
115 { 0, 2, 1 },
118 static const struct arizona_micd_range micd_default_ranges[] = {
119 { .max = 11, .key = BTN_0 },
120 { .max = 28, .key = BTN_1 },
121 { .max = 54, .key = BTN_2 },
122 { .max = 100, .key = BTN_3 },
123 { .max = 186, .key = BTN_4 },
124 { .max = 430, .key = BTN_5 },
127 /* The number of levels in arizona_micd_levels valid for button thresholds */
128 #define ARIZONA_NUM_MICD_BUTTON_LEVELS 64
130 static const int arizona_micd_levels[] = {
131 3, 6, 8, 11, 13, 16, 18, 21, 23, 26, 28, 31, 34, 36, 39, 41, 44, 46,
132 49, 52, 54, 57, 60, 62, 65, 67, 70, 73, 75, 78, 81, 83, 89, 94, 100,
133 105, 111, 116, 122, 127, 139, 150, 161, 173, 186, 196, 209, 220, 245,
134 270, 295, 321, 348, 375, 402, 430, 489, 550, 614, 681, 752, 903, 1071,
135 1257, 30000,
138 static const unsigned int arizona_cable[] = {
139 EXTCON_MECHANICAL,
140 EXTCON_JACK_MICROPHONE,
141 EXTCON_JACK_HEADPHONE,
142 EXTCON_JACK_LINE_OUT,
143 EXTCON_NONE,
146 static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
148 static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
149 bool clamp)
151 struct arizona *arizona = info->arizona;
152 unsigned int mask = 0, val = 0;
153 unsigned int cap_sel = 0;
154 int ret;
156 switch (arizona->type) {
157 case WM8998:
158 case WM1814:
159 mask = 0;
160 break;
161 case WM5110:
162 case WM8280:
163 mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
164 ARIZONA_HP1L_SHRTI;
165 if (clamp) {
166 val = ARIZONA_HP1L_SHRTO;
167 cap_sel = ARIZONA_TST_CAP_CLAMP;
168 } else {
169 val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI;
170 cap_sel = ARIZONA_TST_CAP_DEFAULT;
173 ret = regmap_update_bits(arizona->regmap,
174 ARIZONA_HP_TEST_CTRL_1,
175 ARIZONA_HP1_TST_CAP_SEL_MASK,
176 cap_sel);
177 if (ret != 0)
178 dev_warn(arizona->dev,
179 "Failed to set TST_CAP_SEL: %d\n", ret);
180 break;
181 default:
182 mask = ARIZONA_RMV_SHRT_HP1L;
183 if (clamp)
184 val = ARIZONA_RMV_SHRT_HP1L;
185 break;
188 snd_soc_dapm_mutex_lock(arizona->dapm);
190 arizona->hpdet_clamp = clamp;
192 /* Keep the HP output stages disabled while doing the clamp */
193 if (clamp) {
194 ret = regmap_update_bits(arizona->regmap,
195 ARIZONA_OUTPUT_ENABLES_1,
196 ARIZONA_OUT1L_ENA |
197 ARIZONA_OUT1R_ENA, 0);
198 if (ret != 0)
199 dev_warn(arizona->dev,
200 "Failed to disable headphone outputs: %d\n",
201 ret);
204 if (mask) {
205 ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L,
206 mask, val);
207 if (ret != 0)
208 dev_warn(arizona->dev, "Failed to do clamp: %d\n",
209 ret);
211 ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R,
212 mask, val);
213 if (ret != 0)
214 dev_warn(arizona->dev, "Failed to do clamp: %d\n",
215 ret);
218 /* Restore the desired state while not doing the clamp */
219 if (!clamp) {
220 ret = regmap_update_bits(arizona->regmap,
221 ARIZONA_OUTPUT_ENABLES_1,
222 ARIZONA_OUT1L_ENA |
223 ARIZONA_OUT1R_ENA, arizona->hp_ena);
224 if (ret != 0)
225 dev_warn(arizona->dev,
226 "Failed to restore headphone outputs: %d\n",
227 ret);
230 snd_soc_dapm_mutex_unlock(arizona->dapm);
233 static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
235 struct arizona *arizona = info->arizona;
237 mode %= info->micd_num_modes;
239 if (arizona->pdata.micd_pol_gpio > 0)
240 gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
241 info->micd_modes[mode].gpio);
242 else
243 gpiod_set_value_cansleep(info->micd_pol_gpio,
244 info->micd_modes[mode].gpio);
246 regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
247 ARIZONA_MICD_BIAS_SRC_MASK,
248 info->micd_modes[mode].bias <<
249 ARIZONA_MICD_BIAS_SRC_SHIFT);
250 regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
251 ARIZONA_ACCDET_SRC, info->micd_modes[mode].src);
253 info->micd_mode = mode;
255 dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
258 static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
260 switch (info->micd_modes[0].bias) {
261 case 1:
262 return "MICBIAS1";
263 case 2:
264 return "MICBIAS2";
265 case 3:
266 return "MICBIAS3";
267 default:
268 return "MICVDD";
272 static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info)
274 struct arizona *arizona = info->arizona;
275 const char *widget = arizona_extcon_get_micbias(info);
276 struct snd_soc_dapm_context *dapm = arizona->dapm;
277 int ret;
279 ret = snd_soc_dapm_force_enable_pin(dapm, widget);
280 if (ret != 0)
281 dev_warn(arizona->dev, "Failed to enable %s: %d\n",
282 widget, ret);
284 snd_soc_dapm_sync(dapm);
286 if (!arizona->pdata.micd_force_micbias) {
287 ret = snd_soc_dapm_disable_pin(arizona->dapm, widget);
288 if (ret != 0)
289 dev_warn(arizona->dev, "Failed to disable %s: %d\n",
290 widget, ret);
292 snd_soc_dapm_sync(dapm);
296 static void arizona_start_mic(struct arizona_extcon_info *info)
298 struct arizona *arizona = info->arizona;
299 bool change;
300 int ret;
301 unsigned int mode;
303 /* Microphone detection can't use idle mode */
304 pm_runtime_get(info->dev);
306 if (info->detecting) {
307 ret = regulator_allow_bypass(info->micvdd, false);
308 if (ret != 0) {
309 dev_err(arizona->dev,
310 "Failed to regulate MICVDD: %d\n",
311 ret);
315 ret = regulator_enable(info->micvdd);
316 if (ret != 0) {
317 dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
318 ret);
321 if (info->micd_reva) {
322 regmap_write(arizona->regmap, 0x80, 0x3);
323 regmap_write(arizona->regmap, 0x294, 0);
324 regmap_write(arizona->regmap, 0x80, 0x0);
327 if (info->detecting && arizona->pdata.micd_software_compare)
328 mode = ARIZONA_ACCDET_MODE_ADC;
329 else
330 mode = ARIZONA_ACCDET_MODE_MIC;
332 regmap_update_bits(arizona->regmap,
333 ARIZONA_ACCESSORY_DETECT_MODE_1,
334 ARIZONA_ACCDET_MODE_MASK, mode);
336 arizona_extcon_pulse_micbias(info);
338 regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
339 ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
340 &change);
341 if (!change) {
342 regulator_disable(info->micvdd);
343 pm_runtime_put_autosuspend(info->dev);
347 static void arizona_stop_mic(struct arizona_extcon_info *info)
349 struct arizona *arizona = info->arizona;
350 const char *widget = arizona_extcon_get_micbias(info);
351 struct snd_soc_dapm_context *dapm = arizona->dapm;
352 bool change;
353 int ret;
355 regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
356 ARIZONA_MICD_ENA, 0,
357 &change);
359 ret = snd_soc_dapm_disable_pin(dapm, widget);
360 if (ret != 0)
361 dev_warn(arizona->dev,
362 "Failed to disable %s: %d\n",
363 widget, ret);
365 snd_soc_dapm_sync(dapm);
367 if (info->micd_reva) {
368 regmap_write(arizona->regmap, 0x80, 0x3);
369 regmap_write(arizona->regmap, 0x294, 2);
370 regmap_write(arizona->regmap, 0x80, 0x0);
373 ret = regulator_allow_bypass(info->micvdd, true);
374 if (ret != 0) {
375 dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
376 ret);
379 if (change) {
380 regulator_disable(info->micvdd);
381 pm_runtime_mark_last_busy(info->dev);
382 pm_runtime_put_autosuspend(info->dev);
386 static struct {
387 unsigned int threshold;
388 unsigned int factor_a;
389 unsigned int factor_b;
390 } arizona_hpdet_b_ranges[] = {
391 { 100, 5528, 362464 },
392 { 169, 11084, 6186851 },
393 { 169, 11065, 65460395 },
396 #define ARIZONA_HPDET_B_RANGE_MAX 0x3fb
398 static struct {
399 int min;
400 int max;
401 } arizona_hpdet_c_ranges[] = {
402 { 0, 30 },
403 { 8, 100 },
404 { 100, 1000 },
405 { 1000, 10000 },
408 static int arizona_hpdet_read(struct arizona_extcon_info *info)
410 struct arizona *arizona = info->arizona;
411 unsigned int val, range;
412 int ret;
414 ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val);
415 if (ret != 0) {
416 dev_err(arizona->dev, "Failed to read HPDET status: %d\n",
417 ret);
418 return ret;
421 switch (info->hpdet_ip_version) {
422 case 0:
423 if (!(val & ARIZONA_HP_DONE)) {
424 dev_err(arizona->dev, "HPDET did not complete: %x\n",
425 val);
426 return -EAGAIN;
429 val &= ARIZONA_HP_LVL_MASK;
430 break;
432 case 1:
433 if (!(val & ARIZONA_HP_DONE_B)) {
434 dev_err(arizona->dev, "HPDET did not complete: %x\n",
435 val);
436 return -EAGAIN;
439 ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val);
440 if (ret != 0) {
441 dev_err(arizona->dev, "Failed to read HP value: %d\n",
442 ret);
443 return -EAGAIN;
446 regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
447 &range);
448 range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
449 >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
451 if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
452 (val < arizona_hpdet_b_ranges[range].threshold ||
453 val >= ARIZONA_HPDET_B_RANGE_MAX)) {
454 range++;
455 dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
456 range);
457 regmap_update_bits(arizona->regmap,
458 ARIZONA_HEADPHONE_DETECT_1,
459 ARIZONA_HP_IMPEDANCE_RANGE_MASK,
460 range <<
461 ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
462 return -EAGAIN;
465 /* If we go out of range report top of range */
466 if (val < arizona_hpdet_b_ranges[range].threshold ||
467 val >= ARIZONA_HPDET_B_RANGE_MAX) {
468 dev_dbg(arizona->dev, "Measurement out of range\n");
469 return ARIZONA_HPDET_MAX;
472 dev_dbg(arizona->dev, "HPDET read %d in range %d\n",
473 val, range);
475 val = arizona_hpdet_b_ranges[range].factor_b
476 / ((val * 100) -
477 arizona_hpdet_b_ranges[range].factor_a);
478 break;
480 case 2:
481 if (!(val & ARIZONA_HP_DONE_B)) {
482 dev_err(arizona->dev, "HPDET did not complete: %x\n",
483 val);
484 return -EAGAIN;
487 val &= ARIZONA_HP_LVL_B_MASK;
488 /* Convert to ohms, the value is in 0.5 ohm increments */
489 val /= 2;
491 regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
492 &range);
493 range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
494 >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
496 /* Skip up a range, or report? */
497 if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
498 (val >= arizona_hpdet_c_ranges[range].max)) {
499 range++;
500 dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
501 arizona_hpdet_c_ranges[range].min,
502 arizona_hpdet_c_ranges[range].max);
503 regmap_update_bits(arizona->regmap,
504 ARIZONA_HEADPHONE_DETECT_1,
505 ARIZONA_HP_IMPEDANCE_RANGE_MASK,
506 range <<
507 ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
508 return -EAGAIN;
511 if (range && (val < arizona_hpdet_c_ranges[range].min)) {
512 dev_dbg(arizona->dev, "Reporting range boundary %d\n",
513 arizona_hpdet_c_ranges[range].min);
514 val = arizona_hpdet_c_ranges[range].min;
516 break;
518 default:
519 dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
520 info->hpdet_ip_version);
521 return -EINVAL;
524 dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
525 return val;
528 static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
529 bool *mic)
531 struct arizona *arizona = info->arizona;
532 int id_gpio = arizona->pdata.hpdet_id_gpio;
535 * If we're using HPDET for accessory identification we need
536 * to take multiple measurements, step through them in sequence.
538 if (arizona->pdata.hpdet_acc_id) {
539 info->hpdet_res[info->num_hpdet_res++] = *reading;
541 /* Only check the mic directly if we didn't already ID it */
542 if (id_gpio && info->num_hpdet_res == 1) {
543 dev_dbg(arizona->dev, "Measuring mic\n");
545 regmap_update_bits(arizona->regmap,
546 ARIZONA_ACCESSORY_DETECT_MODE_1,
547 ARIZONA_ACCDET_MODE_MASK |
548 ARIZONA_ACCDET_SRC,
549 ARIZONA_ACCDET_MODE_HPR |
550 info->micd_modes[0].src);
552 gpio_set_value_cansleep(id_gpio, 1);
554 regmap_update_bits(arizona->regmap,
555 ARIZONA_HEADPHONE_DETECT_1,
556 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
557 return -EAGAIN;
560 /* OK, got both. Now, compare... */
561 dev_dbg(arizona->dev, "HPDET measured %d %d\n",
562 info->hpdet_res[0], info->hpdet_res[1]);
564 /* Take the headphone impedance for the main report */
565 *reading = info->hpdet_res[0];
567 /* Sometimes we get false readings due to slow insert */
568 if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) {
569 dev_dbg(arizona->dev, "Retrying high impedance\n");
570 info->num_hpdet_res = 0;
571 info->hpdet_retried = true;
572 arizona_start_hpdet_acc_id(info);
573 pm_runtime_put(info->dev);
574 return -EAGAIN;
578 * If we measure the mic as high impedance
580 if (!id_gpio || info->hpdet_res[1] > 50) {
581 dev_dbg(arizona->dev, "Detected mic\n");
582 *mic = true;
583 info->detecting = true;
584 } else {
585 dev_dbg(arizona->dev, "Detected headphone\n");
588 /* Make sure everything is reset back to the real polarity */
589 regmap_update_bits(arizona->regmap,
590 ARIZONA_ACCESSORY_DETECT_MODE_1,
591 ARIZONA_ACCDET_SRC,
592 info->micd_modes[0].src);
595 return 0;
598 static irqreturn_t arizona_hpdet_irq(int irq, void *data)
600 struct arizona_extcon_info *info = data;
601 struct arizona *arizona = info->arizona;
602 int id_gpio = arizona->pdata.hpdet_id_gpio;
603 unsigned int report = EXTCON_JACK_HEADPHONE;
604 int ret, reading;
605 bool mic = false;
607 mutex_lock(&info->lock);
609 /* If we got a spurious IRQ for some reason then ignore it */
610 if (!info->hpdet_active) {
611 dev_warn(arizona->dev, "Spurious HPDET IRQ\n");
612 mutex_unlock(&info->lock);
613 return IRQ_NONE;
616 /* If the cable was removed while measuring ignore the result */
617 ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
618 if (ret < 0) {
619 dev_err(arizona->dev, "Failed to check cable state: %d\n",
620 ret);
621 goto out;
622 } else if (!ret) {
623 dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
624 goto done;
627 ret = arizona_hpdet_read(info);
628 if (ret == -EAGAIN)
629 goto out;
630 else if (ret < 0)
631 goto done;
632 reading = ret;
634 /* Reset back to starting range */
635 regmap_update_bits(arizona->regmap,
636 ARIZONA_HEADPHONE_DETECT_1,
637 ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
640 ret = arizona_hpdet_do_id(info, &reading, &mic);
641 if (ret == -EAGAIN)
642 goto out;
643 else if (ret < 0)
644 goto done;
646 /* Report high impedence cables as line outputs */
647 if (reading >= 5000)
648 report = EXTCON_JACK_LINE_OUT;
649 else
650 report = EXTCON_JACK_HEADPHONE;
652 ret = extcon_set_state_sync(info->edev, report, true);
653 if (ret != 0)
654 dev_err(arizona->dev, "Failed to report HP/line: %d\n",
655 ret);
657 done:
658 /* Reset back to starting range */
659 regmap_update_bits(arizona->regmap,
660 ARIZONA_HEADPHONE_DETECT_1,
661 ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
664 arizona_extcon_hp_clamp(info, false);
666 if (id_gpio)
667 gpio_set_value_cansleep(id_gpio, 0);
669 /* Revert back to MICDET mode */
670 regmap_update_bits(arizona->regmap,
671 ARIZONA_ACCESSORY_DETECT_MODE_1,
672 ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
674 /* If we have a mic then reenable MICDET */
675 if (mic || info->mic)
676 arizona_start_mic(info);
678 if (info->hpdet_active) {
679 pm_runtime_put_autosuspend(info->dev);
680 info->hpdet_active = false;
683 info->hpdet_done = true;
685 out:
686 mutex_unlock(&info->lock);
688 return IRQ_HANDLED;
691 static void arizona_identify_headphone(struct arizona_extcon_info *info)
693 struct arizona *arizona = info->arizona;
694 int ret;
696 if (info->hpdet_done)
697 return;
699 dev_dbg(arizona->dev, "Starting HPDET\n");
701 /* Make sure we keep the device enabled during the measurement */
702 pm_runtime_get(info->dev);
704 info->hpdet_active = true;
706 if (info->mic)
707 arizona_stop_mic(info);
709 arizona_extcon_hp_clamp(info, true);
711 ret = regmap_update_bits(arizona->regmap,
712 ARIZONA_ACCESSORY_DETECT_MODE_1,
713 ARIZONA_ACCDET_MODE_MASK,
714 arizona->pdata.hpdet_channel);
715 if (ret != 0) {
716 dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
717 goto err;
720 ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
721 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
722 if (ret != 0) {
723 dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
724 ret);
725 goto err;
728 return;
730 err:
731 regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
732 ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
734 /* Just report headphone */
735 ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
736 if (ret != 0)
737 dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
739 if (info->mic)
740 arizona_start_mic(info);
742 info->hpdet_active = false;
745 static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
747 struct arizona *arizona = info->arizona;
748 int hp_reading = 32;
749 bool mic;
750 int ret;
752 dev_dbg(arizona->dev, "Starting identification via HPDET\n");
754 /* Make sure we keep the device enabled during the measurement */
755 pm_runtime_get_sync(info->dev);
757 info->hpdet_active = true;
759 arizona_extcon_hp_clamp(info, true);
761 ret = regmap_update_bits(arizona->regmap,
762 ARIZONA_ACCESSORY_DETECT_MODE_1,
763 ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
764 info->micd_modes[0].src |
765 arizona->pdata.hpdet_channel);
766 if (ret != 0) {
767 dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
768 goto err;
771 if (arizona->pdata.hpdet_acc_id_line) {
772 ret = regmap_update_bits(arizona->regmap,
773 ARIZONA_HEADPHONE_DETECT_1,
774 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
775 if (ret != 0) {
776 dev_err(arizona->dev,
777 "Can't start HPDETL measurement: %d\n",
778 ret);
779 goto err;
781 } else {
782 arizona_hpdet_do_id(info, &hp_reading, &mic);
785 return;
787 err:
788 regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
789 ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
791 /* Just report headphone */
792 ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
793 if (ret != 0)
794 dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
796 info->hpdet_active = false;
799 static void arizona_micd_timeout_work(struct work_struct *work)
801 struct arizona_extcon_info *info = container_of(work,
802 struct arizona_extcon_info,
803 micd_timeout_work.work);
805 mutex_lock(&info->lock);
807 dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n");
809 info->detecting = false;
811 arizona_identify_headphone(info);
813 arizona_stop_mic(info);
815 mutex_unlock(&info->lock);
818 static void arizona_micd_detect(struct work_struct *work)
820 struct arizona_extcon_info *info = container_of(work,
821 struct arizona_extcon_info,
822 micd_detect_work.work);
823 struct arizona *arizona = info->arizona;
824 unsigned int val = 0, lvl;
825 int ret, i, key;
827 cancel_delayed_work_sync(&info->micd_timeout_work);
829 mutex_lock(&info->lock);
831 /* If the cable was removed while measuring ignore the result */
832 ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
833 if (ret < 0) {
834 dev_err(arizona->dev, "Failed to check cable state: %d\n",
835 ret);
836 mutex_unlock(&info->lock);
837 return;
838 } else if (!ret) {
839 dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
840 mutex_unlock(&info->lock);
841 return;
844 if (info->detecting && arizona->pdata.micd_software_compare) {
845 /* Must disable MICD before we read the ADCVAL */
846 regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
847 ARIZONA_MICD_ENA, 0);
848 ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_4, &val);
849 if (ret != 0) {
850 dev_err(arizona->dev,
851 "Failed to read MICDET_ADCVAL: %d\n",
852 ret);
853 mutex_unlock(&info->lock);
854 return;
857 dev_dbg(arizona->dev, "MICDET_ADCVAL: %x\n", val);
859 val &= ARIZONA_MICDET_ADCVAL_MASK;
860 if (val < ARRAY_SIZE(arizona_micd_levels))
861 val = arizona_micd_levels[val];
862 else
863 val = INT_MAX;
865 if (val <= QUICK_HEADPHONE_MAX_OHM)
866 val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_0;
867 else if (val <= MICROPHONE_MIN_OHM)
868 val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_1;
869 else if (val <= MICROPHONE_MAX_OHM)
870 val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_8;
871 else
872 val = ARIZONA_MICD_LVL_8;
875 for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) {
876 ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
877 if (ret != 0) {
878 dev_err(arizona->dev,
879 "Failed to read MICDET: %d\n", ret);
880 mutex_unlock(&info->lock);
881 return;
884 dev_dbg(arizona->dev, "MICDET: %x\n", val);
886 if (!(val & ARIZONA_MICD_VALID)) {
887 dev_warn(arizona->dev,
888 "Microphone detection state invalid\n");
889 mutex_unlock(&info->lock);
890 return;
894 if (i == 10 && !(val & MICD_LVL_0_TO_8)) {
895 dev_err(arizona->dev, "Failed to get valid MICDET value\n");
896 mutex_unlock(&info->lock);
897 return;
900 /* Due to jack detect this should never happen */
901 if (!(val & ARIZONA_MICD_STS)) {
902 dev_warn(arizona->dev, "Detected open circuit\n");
903 info->mic = false;
904 arizona_stop_mic(info);
905 info->detecting = false;
906 arizona_identify_headphone(info);
907 goto handled;
910 /* If we got a high impedence we should have a headset, report it. */
911 if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
912 info->mic = true;
913 info->detecting = false;
915 arizona_identify_headphone(info);
917 ret = extcon_set_state_sync(info->edev,
918 EXTCON_JACK_MICROPHONE, true);
919 if (ret != 0)
920 dev_err(arizona->dev, "Headset report failed: %d\n",
921 ret);
923 /* Don't need to regulate for button detection */
924 ret = regulator_allow_bypass(info->micvdd, true);
925 if (ret != 0) {
926 dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
927 ret);
930 goto handled;
933 /* If we detected a lower impedence during initial startup
934 * then we probably have the wrong polarity, flip it. Don't
935 * do this for the lowest impedences to speed up detection of
936 * plain headphones. If both polarities report a low
937 * impedence then give up and report headphones.
939 if (info->detecting && (val & MICD_LVL_1_TO_7)) {
940 if (info->jack_flips >= info->micd_num_modes * 10) {
941 dev_dbg(arizona->dev, "Detected HP/line\n");
943 info->detecting = false;
945 arizona_identify_headphone(info);
947 arizona_stop_mic(info);
948 } else {
949 info->micd_mode++;
950 if (info->micd_mode == info->micd_num_modes)
951 info->micd_mode = 0;
952 arizona_extcon_set_mode(info, info->micd_mode);
954 info->jack_flips++;
957 goto handled;
961 * If we're still detecting and we detect a short then we've
962 * got a headphone. Otherwise it's a button press.
964 if (val & MICD_LVL_0_TO_7) {
965 if (info->mic) {
966 dev_dbg(arizona->dev, "Mic button detected\n");
968 lvl = val & ARIZONA_MICD_LVL_MASK;
969 lvl >>= ARIZONA_MICD_LVL_SHIFT;
971 for (i = 0; i < info->num_micd_ranges; i++)
972 input_report_key(info->input,
973 info->micd_ranges[i].key, 0);
975 WARN_ON(!lvl);
976 WARN_ON(ffs(lvl) - 1 >= info->num_micd_ranges);
977 if (lvl && ffs(lvl) - 1 < info->num_micd_ranges) {
978 key = info->micd_ranges[ffs(lvl) - 1].key;
979 input_report_key(info->input, key, 1);
980 input_sync(info->input);
983 } else if (info->detecting) {
984 dev_dbg(arizona->dev, "Headphone detected\n");
985 info->detecting = false;
986 arizona_stop_mic(info);
988 arizona_identify_headphone(info);
989 } else {
990 dev_warn(arizona->dev, "Button with no mic: %x\n",
991 val);
993 } else {
994 dev_dbg(arizona->dev, "Mic button released\n");
995 for (i = 0; i < info->num_micd_ranges; i++)
996 input_report_key(info->input,
997 info->micd_ranges[i].key, 0);
998 input_sync(info->input);
999 arizona_extcon_pulse_micbias(info);
1002 handled:
1003 if (info->detecting) {
1004 if (arizona->pdata.micd_software_compare)
1005 regmap_update_bits(arizona->regmap,
1006 ARIZONA_MIC_DETECT_1,
1007 ARIZONA_MICD_ENA,
1008 ARIZONA_MICD_ENA);
1010 queue_delayed_work(system_power_efficient_wq,
1011 &info->micd_timeout_work,
1012 msecs_to_jiffies(info->micd_timeout));
1015 pm_runtime_mark_last_busy(info->dev);
1016 mutex_unlock(&info->lock);
1019 static irqreturn_t arizona_micdet(int irq, void *data)
1021 struct arizona_extcon_info *info = data;
1022 struct arizona *arizona = info->arizona;
1023 int debounce = arizona->pdata.micd_detect_debounce;
1025 cancel_delayed_work_sync(&info->micd_detect_work);
1026 cancel_delayed_work_sync(&info->micd_timeout_work);
1028 mutex_lock(&info->lock);
1029 if (!info->detecting)
1030 debounce = 0;
1031 mutex_unlock(&info->lock);
1033 if (debounce)
1034 queue_delayed_work(system_power_efficient_wq,
1035 &info->micd_detect_work,
1036 msecs_to_jiffies(debounce));
1037 else
1038 arizona_micd_detect(&info->micd_detect_work.work);
1040 return IRQ_HANDLED;
1043 static void arizona_hpdet_work(struct work_struct *work)
1045 struct arizona_extcon_info *info = container_of(work,
1046 struct arizona_extcon_info,
1047 hpdet_work.work);
1049 mutex_lock(&info->lock);
1050 arizona_start_hpdet_acc_id(info);
1051 mutex_unlock(&info->lock);
1054 static irqreturn_t arizona_jackdet(int irq, void *data)
1056 struct arizona_extcon_info *info = data;
1057 struct arizona *arizona = info->arizona;
1058 unsigned int val, present, mask;
1059 bool cancelled_hp, cancelled_mic;
1060 int ret, i;
1062 cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work);
1063 cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work);
1065 pm_runtime_get_sync(info->dev);
1067 mutex_lock(&info->lock);
1069 if (info->micd_clamp) {
1070 mask = ARIZONA_MICD_CLAMP_STS;
1071 present = 0;
1072 } else {
1073 mask = ARIZONA_JD1_STS;
1074 if (arizona->pdata.jd_invert)
1075 present = 0;
1076 else
1077 present = ARIZONA_JD1_STS;
1080 ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
1081 if (ret != 0) {
1082 dev_err(arizona->dev, "Failed to read jackdet status: %d\n",
1083 ret);
1084 mutex_unlock(&info->lock);
1085 pm_runtime_put_autosuspend(info->dev);
1086 return IRQ_NONE;
1089 val &= mask;
1090 if (val == info->last_jackdet) {
1091 dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n");
1092 if (cancelled_hp)
1093 queue_delayed_work(system_power_efficient_wq,
1094 &info->hpdet_work,
1095 msecs_to_jiffies(HPDET_DEBOUNCE));
1097 if (cancelled_mic) {
1098 int micd_timeout = info->micd_timeout;
1100 queue_delayed_work(system_power_efficient_wq,
1101 &info->micd_timeout_work,
1102 msecs_to_jiffies(micd_timeout));
1105 goto out;
1107 info->last_jackdet = val;
1109 if (info->last_jackdet == present) {
1110 dev_dbg(arizona->dev, "Detected jack\n");
1111 ret = extcon_set_state_sync(info->edev,
1112 EXTCON_MECHANICAL, true);
1114 if (ret != 0)
1115 dev_err(arizona->dev, "Mechanical report failed: %d\n",
1116 ret);
1118 if (!arizona->pdata.hpdet_acc_id) {
1119 info->detecting = true;
1120 info->mic = false;
1121 info->jack_flips = 0;
1123 arizona_start_mic(info);
1124 } else {
1125 queue_delayed_work(system_power_efficient_wq,
1126 &info->hpdet_work,
1127 msecs_to_jiffies(HPDET_DEBOUNCE));
1130 if (info->micd_clamp || !arizona->pdata.jd_invert)
1131 regmap_update_bits(arizona->regmap,
1132 ARIZONA_JACK_DETECT_DEBOUNCE,
1133 ARIZONA_MICD_CLAMP_DB |
1134 ARIZONA_JD1_DB, 0);
1135 } else {
1136 dev_dbg(arizona->dev, "Detected jack removal\n");
1138 arizona_stop_mic(info);
1140 info->num_hpdet_res = 0;
1141 for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++)
1142 info->hpdet_res[i] = 0;
1143 info->mic = false;
1144 info->hpdet_done = false;
1145 info->hpdet_retried = false;
1147 for (i = 0; i < info->num_micd_ranges; i++)
1148 input_report_key(info->input,
1149 info->micd_ranges[i].key, 0);
1150 input_sync(info->input);
1152 for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
1153 ret = extcon_set_state_sync(info->edev,
1154 arizona_cable[i], false);
1155 if (ret != 0)
1156 dev_err(arizona->dev,
1157 "Removal report failed: %d\n", ret);
1160 regmap_update_bits(arizona->regmap,
1161 ARIZONA_JACK_DETECT_DEBOUNCE,
1162 ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB,
1163 ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
1166 if (arizona->pdata.micd_timeout)
1167 info->micd_timeout = arizona->pdata.micd_timeout;
1168 else
1169 info->micd_timeout = DEFAULT_MICD_TIMEOUT;
1171 out:
1172 /* Clear trig_sts to make sure DCVDD is not forced up */
1173 regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
1174 ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
1175 ARIZONA_MICD_CLAMP_RISE_TRIG_STS |
1176 ARIZONA_JD1_FALL_TRIG_STS |
1177 ARIZONA_JD1_RISE_TRIG_STS);
1179 mutex_unlock(&info->lock);
1181 pm_runtime_mark_last_busy(info->dev);
1182 pm_runtime_put_autosuspend(info->dev);
1184 return IRQ_HANDLED;
1187 /* Map a level onto a slot in the register bank */
1188 static void arizona_micd_set_level(struct arizona *arizona, int index,
1189 unsigned int level)
1191 int reg;
1192 unsigned int mask;
1194 reg = ARIZONA_MIC_DETECT_LEVEL_4 - (index / 2);
1196 if (!(index % 2)) {
1197 mask = 0x3f00;
1198 level <<= 8;
1199 } else {
1200 mask = 0x3f;
1203 /* Program the level itself */
1204 regmap_update_bits(arizona->regmap, reg, mask, level);
1207 static int arizona_extcon_get_micd_configs(struct device *dev,
1208 struct arizona *arizona)
1210 const char * const prop = "wlf,micd-configs";
1211 const int entries_per_config = 3;
1212 struct arizona_micd_config *micd_configs;
1213 int nconfs, ret;
1214 int i, j;
1215 u32 *vals;
1217 nconfs = device_property_read_u32_array(arizona->dev, prop, NULL, 0);
1218 if (nconfs <= 0)
1219 return 0;
1221 vals = kcalloc(nconfs, sizeof(u32), GFP_KERNEL);
1222 if (!vals)
1223 return -ENOMEM;
1225 ret = device_property_read_u32_array(arizona->dev, prop, vals, nconfs);
1226 if (ret < 0)
1227 goto out;
1229 nconfs /= entries_per_config;
1231 micd_configs = devm_kzalloc(dev,
1232 nconfs * sizeof(struct arizona_micd_range),
1233 GFP_KERNEL);
1234 if (!micd_configs) {
1235 ret = -ENOMEM;
1236 goto out;
1239 for (i = 0, j = 0; i < nconfs; ++i) {
1240 micd_configs[i].src = vals[j++] ? ARIZONA_ACCDET_SRC : 0;
1241 micd_configs[i].bias = vals[j++];
1242 micd_configs[i].gpio = vals[j++];
1245 arizona->pdata.micd_configs = micd_configs;
1246 arizona->pdata.num_micd_configs = nconfs;
1248 out:
1249 kfree(vals);
1250 return ret;
1253 static int arizona_extcon_device_get_pdata(struct device *dev,
1254 struct arizona *arizona)
1256 struct arizona_pdata *pdata = &arizona->pdata;
1257 unsigned int val = ARIZONA_ACCDET_MODE_HPL;
1258 int ret;
1260 device_property_read_u32(arizona->dev, "wlf,hpdet-channel", &val);
1261 switch (val) {
1262 case ARIZONA_ACCDET_MODE_HPL:
1263 case ARIZONA_ACCDET_MODE_HPR:
1264 pdata->hpdet_channel = val;
1265 break;
1266 default:
1267 dev_err(arizona->dev,
1268 "Wrong wlf,hpdet-channel DT value %d\n", val);
1269 pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
1272 device_property_read_u32(arizona->dev, "wlf,micd-detect-debounce",
1273 &pdata->micd_detect_debounce);
1275 device_property_read_u32(arizona->dev, "wlf,micd-bias-start-time",
1276 &pdata->micd_bias_start_time);
1278 device_property_read_u32(arizona->dev, "wlf,micd-rate",
1279 &pdata->micd_rate);
1281 device_property_read_u32(arizona->dev, "wlf,micd-dbtime",
1282 &pdata->micd_dbtime);
1284 device_property_read_u32(arizona->dev, "wlf,micd-timeout-ms",
1285 &pdata->micd_timeout);
1287 pdata->micd_force_micbias = device_property_read_bool(arizona->dev,
1288 "wlf,micd-force-micbias");
1290 pdata->micd_software_compare = device_property_read_bool(arizona->dev,
1291 "wlf,micd-software-compare");
1293 pdata->jd_invert = device_property_read_bool(arizona->dev,
1294 "wlf,jd-invert");
1296 device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw);
1298 pdata->jd_gpio5 = device_property_read_bool(arizona->dev,
1299 "wlf,use-jd2");
1300 pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev,
1301 "wlf,use-jd2-nopull");
1303 ret = arizona_extcon_get_micd_configs(dev, arizona);
1304 if (ret < 0)
1305 dev_err(arizona->dev, "Failed to read micd configs: %d\n", ret);
1307 return 0;
1310 static int arizona_extcon_probe(struct platform_device *pdev)
1312 struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
1313 struct arizona_pdata *pdata = &arizona->pdata;
1314 struct arizona_extcon_info *info;
1315 unsigned int val;
1316 unsigned int clamp_mode;
1317 int jack_irq_fall, jack_irq_rise;
1318 int ret, mode, i, j;
1320 if (!arizona->dapm || !arizona->dapm->card)
1321 return -EPROBE_DEFER;
1323 info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
1324 if (!info)
1325 return -ENOMEM;
1327 if (!dev_get_platdata(arizona->dev))
1328 arizona_extcon_device_get_pdata(&pdev->dev, arizona);
1330 info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
1331 if (IS_ERR(info->micvdd)) {
1332 ret = PTR_ERR(info->micvdd);
1333 dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret);
1334 return ret;
1337 mutex_init(&info->lock);
1338 info->arizona = arizona;
1339 info->dev = &pdev->dev;
1340 info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS);
1341 INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work);
1342 INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect);
1343 INIT_DELAYED_WORK(&info->micd_timeout_work, arizona_micd_timeout_work);
1344 platform_set_drvdata(pdev, info);
1346 switch (arizona->type) {
1347 case WM5102:
1348 switch (arizona->rev) {
1349 case 0:
1350 info->micd_reva = true;
1351 break;
1352 default:
1353 info->micd_clamp = true;
1354 info->hpdet_ip_version = 1;
1355 break;
1357 break;
1358 case WM5110:
1359 case WM8280:
1360 switch (arizona->rev) {
1361 case 0 ... 2:
1362 break;
1363 default:
1364 info->micd_clamp = true;
1365 info->hpdet_ip_version = 2;
1366 break;
1368 break;
1369 case WM8998:
1370 case WM1814:
1371 info->micd_clamp = true;
1372 info->hpdet_ip_version = 2;
1373 break;
1374 default:
1375 break;
1378 info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable);
1379 if (IS_ERR(info->edev)) {
1380 dev_err(&pdev->dev, "failed to allocate extcon device\n");
1381 return -ENOMEM;
1384 ret = devm_extcon_dev_register(&pdev->dev, info->edev);
1385 if (ret < 0) {
1386 dev_err(arizona->dev, "extcon_dev_register() failed: %d\n",
1387 ret);
1388 return ret;
1391 info->input = devm_input_allocate_device(&pdev->dev);
1392 if (!info->input) {
1393 dev_err(arizona->dev, "Can't allocate input dev\n");
1394 ret = -ENOMEM;
1395 goto err_register;
1398 info->input->name = "Headset";
1399 info->input->phys = "arizona/extcon";
1401 if (pdata->num_micd_configs) {
1402 info->micd_modes = pdata->micd_configs;
1403 info->micd_num_modes = pdata->num_micd_configs;
1404 } else {
1405 info->micd_modes = micd_default_modes;
1406 info->micd_num_modes = ARRAY_SIZE(micd_default_modes);
1409 if (arizona->pdata.gpsw > 0)
1410 regmap_update_bits(arizona->regmap, ARIZONA_GP_SWITCH_1,
1411 ARIZONA_SW1_MODE_MASK, arizona->pdata.gpsw);
1413 if (arizona->pdata.micd_pol_gpio > 0) {
1414 if (info->micd_modes[0].gpio)
1415 mode = GPIOF_OUT_INIT_HIGH;
1416 else
1417 mode = GPIOF_OUT_INIT_LOW;
1419 ret = devm_gpio_request_one(&pdev->dev,
1420 arizona->pdata.micd_pol_gpio,
1421 mode,
1422 "MICD polarity");
1423 if (ret != 0) {
1424 dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
1425 arizona->pdata.micd_pol_gpio, ret);
1426 goto err_register;
1428 } else {
1429 if (info->micd_modes[0].gpio)
1430 mode = GPIOD_OUT_HIGH;
1431 else
1432 mode = GPIOD_OUT_LOW;
1434 /* We can't use devm here because we need to do the get
1435 * against the MFD device, as that is where the of_node
1436 * will reside, but if we devm against that the GPIO
1437 * will not be freed if the extcon driver is unloaded.
1439 info->micd_pol_gpio = gpiod_get_optional(arizona->dev,
1440 "wlf,micd-pol",
1441 GPIOD_OUT_LOW);
1442 if (IS_ERR(info->micd_pol_gpio)) {
1443 ret = PTR_ERR(info->micd_pol_gpio);
1444 dev_err(arizona->dev,
1445 "Failed to get microphone polarity GPIO: %d\n",
1446 ret);
1447 goto err_register;
1451 if (arizona->pdata.hpdet_id_gpio > 0) {
1452 ret = devm_gpio_request_one(&pdev->dev,
1453 arizona->pdata.hpdet_id_gpio,
1454 GPIOF_OUT_INIT_LOW,
1455 "HPDET");
1456 if (ret != 0) {
1457 dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
1458 arizona->pdata.hpdet_id_gpio, ret);
1459 goto err_gpio;
1463 if (arizona->pdata.micd_bias_start_time)
1464 regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
1465 ARIZONA_MICD_BIAS_STARTTIME_MASK,
1466 arizona->pdata.micd_bias_start_time
1467 << ARIZONA_MICD_BIAS_STARTTIME_SHIFT);
1469 if (arizona->pdata.micd_rate)
1470 regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
1471 ARIZONA_MICD_RATE_MASK,
1472 arizona->pdata.micd_rate
1473 << ARIZONA_MICD_RATE_SHIFT);
1475 switch (arizona->pdata.micd_dbtime) {
1476 case MICD_DBTIME_FOUR_READINGS:
1477 regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
1478 ARIZONA_MICD_DBTIME_MASK,
1479 ARIZONA_MICD_DBTIME);
1480 break;
1481 case MICD_DBTIME_TWO_READINGS:
1482 regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
1483 ARIZONA_MICD_DBTIME_MASK, 0);
1484 break;
1485 default:
1486 break;
1489 BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) <
1490 ARIZONA_NUM_MICD_BUTTON_LEVELS);
1492 if (arizona->pdata.num_micd_ranges) {
1493 info->micd_ranges = pdata->micd_ranges;
1494 info->num_micd_ranges = pdata->num_micd_ranges;
1495 } else {
1496 info->micd_ranges = micd_default_ranges;
1497 info->num_micd_ranges = ARRAY_SIZE(micd_default_ranges);
1500 if (arizona->pdata.num_micd_ranges > ARIZONA_MAX_MICD_RANGE) {
1501 dev_err(arizona->dev, "Too many MICD ranges: %d\n",
1502 arizona->pdata.num_micd_ranges);
1505 if (info->num_micd_ranges > 1) {
1506 for (i = 1; i < info->num_micd_ranges; i++) {
1507 if (info->micd_ranges[i - 1].max >
1508 info->micd_ranges[i].max) {
1509 dev_err(arizona->dev,
1510 "MICD ranges must be sorted\n");
1511 ret = -EINVAL;
1512 goto err_gpio;
1517 /* Disable all buttons by default */
1518 regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2,
1519 ARIZONA_MICD_LVL_SEL_MASK, 0x81);
1521 /* Set up all the buttons the user specified */
1522 for (i = 0; i < info->num_micd_ranges; i++) {
1523 for (j = 0; j < ARIZONA_NUM_MICD_BUTTON_LEVELS; j++)
1524 if (arizona_micd_levels[j] >= info->micd_ranges[i].max)
1525 break;
1527 if (j == ARIZONA_NUM_MICD_BUTTON_LEVELS) {
1528 dev_err(arizona->dev, "Unsupported MICD level %d\n",
1529 info->micd_ranges[i].max);
1530 ret = -EINVAL;
1531 goto err_gpio;
1534 dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n",
1535 arizona_micd_levels[j], i);
1537 arizona_micd_set_level(arizona, i, j);
1538 input_set_capability(info->input, EV_KEY,
1539 info->micd_ranges[i].key);
1541 /* Enable reporting of that range */
1542 regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2,
1543 1 << i, 1 << i);
1546 /* Set all the remaining keys to a maximum */
1547 for (; i < ARIZONA_MAX_MICD_RANGE; i++)
1548 arizona_micd_set_level(arizona, i, 0x3f);
1551 * If we have a clamp use it, activating in conjunction with
1552 * GPIO5 if that is connected for jack detect operation.
1554 if (info->micd_clamp) {
1555 if (arizona->pdata.jd_gpio5) {
1556 /* Put the GPIO into input mode with optional pull */
1557 val = 0xc101;
1558 if (arizona->pdata.jd_gpio5_nopull)
1559 val &= ~ARIZONA_GPN_PU;
1561 regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
1562 val);
1564 if (arizona->pdata.jd_invert)
1565 clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H;
1566 else
1567 clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H;
1568 } else {
1569 if (arizona->pdata.jd_invert)
1570 clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH;
1571 else
1572 clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL;
1575 regmap_update_bits(arizona->regmap,
1576 ARIZONA_MICD_CLAMP_CONTROL,
1577 ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode);
1579 regmap_update_bits(arizona->regmap,
1580 ARIZONA_JACK_DETECT_DEBOUNCE,
1581 ARIZONA_MICD_CLAMP_DB,
1582 ARIZONA_MICD_CLAMP_DB);
1585 arizona_extcon_set_mode(info, 0);
1587 pm_runtime_enable(&pdev->dev);
1588 pm_runtime_idle(&pdev->dev);
1589 pm_runtime_get_sync(&pdev->dev);
1591 if (info->micd_clamp) {
1592 jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
1593 jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
1594 } else {
1595 jack_irq_rise = ARIZONA_IRQ_JD_RISE;
1596 jack_irq_fall = ARIZONA_IRQ_JD_FALL;
1599 ret = arizona_request_irq(arizona, jack_irq_rise,
1600 "JACKDET rise", arizona_jackdet, info);
1601 if (ret != 0) {
1602 dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
1603 ret);
1604 goto err_gpio;
1607 ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1);
1608 if (ret != 0) {
1609 dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n",
1610 ret);
1611 goto err_rise;
1614 ret = arizona_request_irq(arizona, jack_irq_fall,
1615 "JACKDET fall", arizona_jackdet, info);
1616 if (ret != 0) {
1617 dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret);
1618 goto err_rise_wake;
1621 ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1);
1622 if (ret != 0) {
1623 dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n",
1624 ret);
1625 goto err_fall;
1628 ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET,
1629 "MICDET", arizona_micdet, info);
1630 if (ret != 0) {
1631 dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret);
1632 goto err_fall_wake;
1635 ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET,
1636 "HPDET", arizona_hpdet_irq, info);
1637 if (ret != 0) {
1638 dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret);
1639 goto err_micdet;
1642 arizona_clk32k_enable(arizona);
1643 regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE,
1644 ARIZONA_JD1_DB, ARIZONA_JD1_DB);
1645 regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
1646 ARIZONA_JD1_ENA, ARIZONA_JD1_ENA);
1648 ret = regulator_allow_bypass(info->micvdd, true);
1649 if (ret != 0)
1650 dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n",
1651 ret);
1653 pm_runtime_put(&pdev->dev);
1655 ret = input_register_device(info->input);
1656 if (ret) {
1657 dev_err(&pdev->dev, "Can't register input device: %d\n", ret);
1658 goto err_hpdet;
1661 return 0;
1663 err_hpdet:
1664 arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
1665 err_micdet:
1666 arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
1667 err_fall_wake:
1668 arizona_set_irq_wake(arizona, jack_irq_fall, 0);
1669 err_fall:
1670 arizona_free_irq(arizona, jack_irq_fall, info);
1671 err_rise_wake:
1672 arizona_set_irq_wake(arizona, jack_irq_rise, 0);
1673 err_rise:
1674 arizona_free_irq(arizona, jack_irq_rise, info);
1675 err_gpio:
1676 gpiod_put(info->micd_pol_gpio);
1677 err_register:
1678 pm_runtime_disable(&pdev->dev);
1679 return ret;
1682 static int arizona_extcon_remove(struct platform_device *pdev)
1684 struct arizona_extcon_info *info = platform_get_drvdata(pdev);
1685 struct arizona *arizona = info->arizona;
1686 int jack_irq_rise, jack_irq_fall;
1688 gpiod_put(info->micd_pol_gpio);
1690 pm_runtime_disable(&pdev->dev);
1692 regmap_update_bits(arizona->regmap,
1693 ARIZONA_MICD_CLAMP_CONTROL,
1694 ARIZONA_MICD_CLAMP_MODE_MASK, 0);
1696 if (info->micd_clamp) {
1697 jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
1698 jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
1699 } else {
1700 jack_irq_rise = ARIZONA_IRQ_JD_RISE;
1701 jack_irq_fall = ARIZONA_IRQ_JD_FALL;
1704 arizona_set_irq_wake(arizona, jack_irq_rise, 0);
1705 arizona_set_irq_wake(arizona, jack_irq_fall, 0);
1706 arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
1707 arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
1708 arizona_free_irq(arizona, jack_irq_rise, info);
1709 arizona_free_irq(arizona, jack_irq_fall, info);
1710 cancel_delayed_work_sync(&info->hpdet_work);
1711 regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
1712 ARIZONA_JD1_ENA, 0);
1713 arizona_clk32k_disable(arizona);
1715 return 0;
1718 static struct platform_driver arizona_extcon_driver = {
1719 .driver = {
1720 .name = "arizona-extcon",
1722 .probe = arizona_extcon_probe,
1723 .remove = arizona_extcon_remove,
1726 module_platform_driver(arizona_extcon_driver);
1728 MODULE_DESCRIPTION("Arizona Extcon driver");
1729 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1730 MODULE_LICENSE("GPL");
1731 MODULE_ALIAS("platform:extcon-arizona");