[PATCH] USB: remove .owner field from struct usb_driver

[linux-2.6/btrfs-unstable.git] / drivers / usb / serial / empeg.c

/*
 * USB Empeg empeg-car player driver
 *
 *      Copyright (C) 2000, 2001
 *          Gary Brubaker (xavyer@ix.netcom.com)
 *
 *      Copyright (C) 1999 - 2001
 *          Greg Kroah-Hartman (greg@kroah.com)
 *
 *      This program is free software; you can redistribute it and/or modify
 *      it under the terms of the GNU General Public License, as published by
 *      the Free Software Foundation, version 2.
 *
 * See Documentation/usb/usb-serial.txt for more information on using this driver
 * 
 * (07/16/2001) gb
 *      remove unused code in empeg_close() (thanks to Oliver Neukum for pointing this
 *      out) and rewrote empeg_set_termios().
 * 
 * (05/30/2001) gkh
 *      switched from using spinlock to a semaphore, which fixes lots of problems.
 *
 * (04/08/2001) gb
 *      Identify version on module load.
 * 
 * (01/22/2001) gb
 *      Added write_room() and chars_in_buffer() support. 
 * 
 * (12/21/2000) gb
 *      Moved termio stuff inside the port->active check.
 *      Moved MOD_DEC_USE_COUNT to end of empeg_close().
 * 
 * (12/03/2000) gb
 *      Added port->tty->ldisc.set_termios(port->tty, NULL) to empeg_open()
 *      This notifies the tty driver that the termios have changed.
 * 
 * (11/13/2000) gb
 *      Moved tty->low_latency = 1 from empeg_read_bulk_callback() to empeg_open()
 *      (It only needs to be set once - Doh!)
 * 
 * (11/11/2000) gb
 *      Updated to work with id_table structure.
 * 
 * (11/04/2000) gb
 *      Forked this from visor.c, and hacked it up to work with an
 *      Empeg ltd. empeg-car player.  Constructive criticism welcomed.
 *      I would like to say, 'Thank You' to Greg Kroah-Hartman for the
 *      use of his code, and for his guidance, advice and patience. :)
 *      A 'Thank You' is in order for John Ripley of Empeg ltd for his
 *      advice, and patience too.
 * 
 */

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"

static int debug;

/*
 * Version Information
 */
#define DRIVER_VERSION "v1.2"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
#define DRIVER_DESC "USB Empeg Mark I/II Driver"

#define EMPEG_VENDOR_ID                 0x084f
#define EMPEG_PRODUCT_ID                0x0001

/* function prototypes for an empeg-car player */
static int  empeg_open                  (struct usb_serial_port *port, struct file *filp);
static void empeg_close                 (struct usb_serial_port *port, struct file *filp);
static int  empeg_write                 (struct usb_serial_port *port,
                                        const unsigned char *buf,
                                        int count);
static int  empeg_write_room            (struct usb_serial_port *port);
static int  empeg_chars_in_buffer       (struct usb_serial_port *port);
static void empeg_throttle              (struct usb_serial_port *port);
static void empeg_unthrottle            (struct usb_serial_port *port);
static int  empeg_startup               (struct usb_serial *serial);
static void empeg_shutdown              (struct usb_serial *serial);
static int  empeg_ioctl                 (struct usb_serial_port *port,
                                        struct file * file,
                                        unsigned int cmd,
                                        unsigned long arg);
static void empeg_set_termios           (struct usb_serial_port *port, struct termios *old_termios);
static void empeg_write_bulk_callback   (struct urb *urb, struct pt_regs *regs);
static void empeg_read_bulk_callback    (struct urb *urb, struct pt_regs *regs);

static struct usb_device_id id_table [] = {
        { USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
        { }                                     /* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table);

static struct usb_driver empeg_driver = {
        .name =         "empeg",
        .probe =        usb_serial_probe,
        .disconnect =   usb_serial_disconnect,
        .id_table =     id_table,
        .no_dynamic_id =        1,
};

static struct usb_serial_driver empeg_device = {
        .driver = {
                .owner =        THIS_MODULE,
                .name =         "empeg",
        },
        .id_table =             id_table,
        .num_interrupt_in =     0,
        .num_bulk_in =          1,
        .num_bulk_out =         1,
        .num_ports =            1,
        .open =                 empeg_open,
        .close =                empeg_close,
        .throttle =             empeg_throttle,
        .unthrottle =           empeg_unthrottle,
        .attach =               empeg_startup,
        .shutdown =             empeg_shutdown,
        .ioctl =                empeg_ioctl,
        .set_termios =          empeg_set_termios,
        .write =                empeg_write,
        .write_room =           empeg_write_room,
        .chars_in_buffer =      empeg_chars_in_buffer,
        .write_bulk_callback =  empeg_write_bulk_callback,
        .read_bulk_callback =   empeg_read_bulk_callback,
};

#define NUM_URBS                        16
#define URB_TRANSFER_BUFFER_SIZE        4096

static struct urb       *write_urb_pool[NUM_URBS];
static spinlock_t       write_urb_pool_lock;
static int              bytes_in;
static int              bytes_out;

/******************************************************************************
 * Empeg specific driver functions
 ******************************************************************************/
static int empeg_open (struct usb_serial_port *port, struct file *filp)
{
        struct usb_serial *serial = port->serial;
        int result = 0;

        dbg("%s - port %d", __FUNCTION__, port->number);

        /* Force default termio settings */
        empeg_set_termios (port, NULL) ;

        bytes_in = 0;
        bytes_out = 0;

        /* Start reading from the device */
        usb_fill_bulk_urb(
                port->read_urb,
                serial->dev, 
                usb_rcvbulkpipe(serial->dev,
                        port->bulk_in_endpointAddress),
                port->read_urb->transfer_buffer,
                port->read_urb->transfer_buffer_length,
                empeg_read_bulk_callback,
                port);

        result = usb_submit_urb(port->read_urb, GFP_KERNEL);

        if (result)
                dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);

        return result;
}


static void empeg_close (struct usb_serial_port *port, struct file * filp)
{
        dbg("%s - port %d", __FUNCTION__, port->number);

        /* shutdown our bulk read */
        usb_kill_urb(port->read_urb);
        /* Uncomment the following line if you want to see some statistics in your syslog */
        /* dev_info (&port->dev, "Bytes In = %d  Bytes Out = %d\n", bytes_in, bytes_out); */
}


static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, int count)
{
        struct usb_serial *serial = port->serial;
        struct urb *urb;
        const unsigned char *current_position = buf;
        unsigned long flags;
        int status;
        int i;
        int bytes_sent = 0;
        int transfer_size;

        dbg("%s - port %d", __FUNCTION__, port->number);

        while (count > 0) {

                /* try to find a free urb in our list of them */
                urb = NULL;

                spin_lock_irqsave (&write_urb_pool_lock, flags);

                for (i = 0; i < NUM_URBS; ++i) {
                        if (write_urb_pool[i]->status != -EINPROGRESS) {
                                urb = write_urb_pool[i];
                                break;
                        }
                }

                spin_unlock_irqrestore (&write_urb_pool_lock, flags);

                if (urb == NULL) {
                        dbg("%s - no more free urbs", __FUNCTION__);
                        goto exit;
                }

                if (urb->transfer_buffer == NULL) {
                        urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
                        if (urb->transfer_buffer == NULL) {
                                dev_err(&port->dev, "%s no more kernel memory...\n", __FUNCTION__);
                                goto exit;
                        }
                }

                transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE);

                memcpy (urb->transfer_buffer, current_position, transfer_size);

                usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, urb->transfer_buffer);

                /* build up our urb */
                usb_fill_bulk_urb (
                        urb,
                        serial->dev,
                        usb_sndbulkpipe(serial->dev,
                                port->bulk_out_endpointAddress), 
                        urb->transfer_buffer,
                        transfer_size,
                        empeg_write_bulk_callback,
                        port);

                /* send it down the pipe */
                status = usb_submit_urb(urb, GFP_ATOMIC);
                if (status) {
                        dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __FUNCTION__, status);
                        bytes_sent = status;
                        break;
                }

                current_position += transfer_size;
                bytes_sent += transfer_size;
                count -= transfer_size;
                bytes_out += transfer_size;

        }

exit:
        return bytes_sent;

} 


static int empeg_write_room (struct usb_serial_port *port)
{
        unsigned long flags;
        int i;
        int room = 0;

        dbg("%s - port %d", __FUNCTION__, port->number);

        spin_lock_irqsave (&write_urb_pool_lock, flags);

        /* tally up the number of bytes available */
        for (i = 0; i < NUM_URBS; ++i) {
                if (write_urb_pool[i]->status != -EINPROGRESS) {
                        room += URB_TRANSFER_BUFFER_SIZE;
                }
        } 

        spin_unlock_irqrestore (&write_urb_pool_lock, flags);

        dbg("%s - returns %d", __FUNCTION__, room);

        return (room);

}


static int empeg_chars_in_buffer (struct usb_serial_port *port)
{
        unsigned long flags;
        int i;
        int chars = 0;

        dbg("%s - port %d", __FUNCTION__, port->number);

        spin_lock_irqsave (&write_urb_pool_lock, flags);

        /* tally up the number of bytes waiting */
        for (i = 0; i < NUM_URBS; ++i) {
                if (write_urb_pool[i]->status == -EINPROGRESS) {
                        chars += URB_TRANSFER_BUFFER_SIZE;
                }
        }

        spin_unlock_irqrestore (&write_urb_pool_lock, flags);

        dbg("%s - returns %d", __FUNCTION__, chars);

        return (chars);

}


static void empeg_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
        struct usb_serial_port *port = (struct usb_serial_port *)urb->context;

        dbg("%s - port %d", __FUNCTION__, port->number);

        if (urb->status) {
                dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
                return;
        }

        schedule_work(&port->work);
}


static void empeg_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
        struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
        struct tty_struct *tty;
        unsigned char *data = urb->transfer_buffer;
        int i;
        int result;

        dbg("%s - port %d", __FUNCTION__, port->number);

        if (urb->status) {
                dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
                return;
        }

        usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);

        tty = port->tty;

        if (urb->actual_length) {
                for (i = 0; i < urb->actual_length ; ++i) {
                        /* gb - 2000/11/13
                         * If we insert too many characters we'll overflow the buffer.
                         * This means we'll lose bytes - Decidedly bad.
                         */
                        if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
                                tty_flip_buffer_push(tty);
                                }
                        tty_insert_flip_char(tty, data[i], 0);
                }
                /* gb - 2000/11/13
                 * Goes straight through instead of scheduling - if tty->low_latency is set.
                 */
                tty_flip_buffer_push(tty);
                bytes_in += urb->actual_length;
        }

        /* Continue trying to always read  */
        usb_fill_bulk_urb(
                port->read_urb,
                port->serial->dev, 
                usb_rcvbulkpipe(port->serial->dev,
                        port->bulk_in_endpointAddress),
                port->read_urb->transfer_buffer,
                port->read_urb->transfer_buffer_length,
                empeg_read_bulk_callback,
                port);

        result = usb_submit_urb(port->read_urb, GFP_ATOMIC);

        if (result)
                dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);

        return;

}


static void empeg_throttle (struct usb_serial_port *port)
{
        dbg("%s - port %d", __FUNCTION__, port->number);
        usb_kill_urb(port->read_urb);
}


static void empeg_unthrottle (struct usb_serial_port *port)
{
        int result;

        dbg("%s - port %d", __FUNCTION__, port->number);

        port->read_urb->dev = port->serial->dev;

        result = usb_submit_urb(port->read_urb, GFP_ATOMIC);

        if (result)
                dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);

        return;
}


static int  empeg_startup (struct usb_serial *serial)
{
        int r;

        dbg("%s", __FUNCTION__);

        if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
                err("active config #%d != 1 ??",
                        serial->dev->actconfig->desc.bConfigurationValue);
                return -ENODEV;
        }
        dbg("%s - reset config", __FUNCTION__);
        r = usb_reset_configuration (serial->dev);

        /* continue on with initialization */
        return r;

}


static void empeg_shutdown (struct usb_serial *serial)
{
        dbg ("%s", __FUNCTION__);
}


static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
        dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);

        return -ENOIOCTLCMD;
}


static void empeg_set_termios (struct usb_serial_port *port, struct termios *old_termios)
{

        dbg("%s - port %d", __FUNCTION__, port->number);

        if ((!port->tty) || (!port->tty->termios)) {
                dbg("%s - no tty structures", __FUNCTION__);
                return;
        }

        /*
         * The empeg-car player wants these particular tty settings.
         * You could, for example, change the baud rate, however the
         * player only supports 115200 (currently), so there is really
         * no point in support for changes to the tty settings.
         * (at least for now)
         *
         * The default requirements for this device are:
         */
        port->tty->termios->c_iflag
                &= ~(IGNBRK     /* disable ignore break */
                | BRKINT        /* disable break causes interrupt */
                | PARMRK        /* disable mark parity errors */
                | ISTRIP        /* disable clear high bit of input characters */
                | INLCR         /* disable translate NL to CR */
                | IGNCR         /* disable ignore CR */
                | ICRNL         /* disable translate CR to NL */
                | IXON);        /* disable enable XON/XOFF flow control */

        port->tty->termios->c_oflag
                &= ~OPOST;      /* disable postprocess output characters */

        port->tty->termios->c_lflag
                &= ~(ECHO       /* disable echo input characters */
                | ECHONL        /* disable echo new line */
                | ICANON        /* disable erase, kill, werase, and rprnt special characters */
                | ISIG          /* disable interrupt, quit, and suspend special characters */
                | IEXTEN);      /* disable non-POSIX special characters */

        port->tty->termios->c_cflag
                &= ~(CSIZE      /* no size */
                | PARENB        /* disable parity bit */
                | CBAUD);       /* clear current baud rate */

        port->tty->termios->c_cflag
                |= (CS8         /* character size 8 bits */
                | B115200);     /* baud rate 115200 */

        /*
         * Force low_latency on; otherwise the pushes are scheduled;
         * this is bad as it opens up the possibility of dropping bytes
         * on the floor.  We don't want to drop bytes on the floor. :)
         */
        port->tty->low_latency = 1;

        return;
}


static int __init empeg_init (void)
{
        struct urb *urb;
        int i, retval;

        /* create our write urb pool and transfer buffers */ 
        spin_lock_init (&write_urb_pool_lock);
        for (i = 0; i < NUM_URBS; ++i) {
                urb = usb_alloc_urb(0, GFP_KERNEL);
                write_urb_pool[i] = urb;
                if (urb == NULL) {
                        err("No more urbs???");
                        continue;
                }

                urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
                if (!urb->transfer_buffer) {
                        err("%s - out of memory for urb buffers.", 
                            __FUNCTION__);
                        continue;
                }
        }

        retval = usb_serial_register(&empeg_device);
        if (retval)
                goto failed_usb_serial_register;
        retval = usb_register(&empeg_driver);
        if (retval)
                goto failed_usb_register;

        info(DRIVER_VERSION ":" DRIVER_DESC);

        return 0;
failed_usb_register:
        usb_serial_deregister(&empeg_device);
failed_usb_serial_register:
        for (i = 0; i < NUM_URBS; ++i) {
                if (write_urb_pool[i]) {
                        kfree(write_urb_pool[i]->transfer_buffer);
                        usb_free_urb(write_urb_pool[i]);
                }
        }
        return retval;
}


static void __exit empeg_exit (void)
{
        int i;
        unsigned long flags;

        usb_deregister(&empeg_driver);
        usb_serial_deregister (&empeg_device);

        spin_lock_irqsave (&write_urb_pool_lock, flags);

        for (i = 0; i < NUM_URBS; ++i) {
                if (write_urb_pool[i]) {
                        /* FIXME - uncomment the following usb_kill_urb call when
                         * the host controllers get fixed to set urb->dev = NULL after
                         * the urb is finished.  Otherwise this call oopses. */
                        /* usb_kill_urb(write_urb_pool[i]); */
                        kfree(write_urb_pool[i]->transfer_buffer);
                        usb_free_urb (write_urb_pool[i]);
                }
        }

        spin_unlock_irqrestore (&write_urb_pool_lock, flags);
}


module_init(empeg_init);
module_exit(empeg_exit);

MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");