2 * This is the Fusion MPT base driver providing common API layer interface
3 * for access to MPT (Message Passing Technology) firmware.
5 * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
6 * Copyright (C) 2007-2010 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
24 * solely responsible for determining the appropriateness of using and
25 * distributing the Program and assumes all risks associated with its
26 * exercise of rights under this Agreement, including but not limited to
27 * the risks and costs of program errors, damage to or loss of data,
28 * programs or equipment, and unavailability or interruption of operations.
30 * DISCLAIMER OF LIABILITY
31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
45 #include <linux/version.h>
46 #include <linux/kernel.h>
47 #include <linux/module.h>
48 #include <linux/errno.h>
49 #include <linux/init.h>
50 #include <linux/slab.h>
51 #include <linux/types.h>
52 #include <linux/pci.h>
53 #include <linux/kdev_t.h>
54 #include <linux/blkdev.h>
55 #include <linux/delay.h>
56 #include <linux/interrupt.h>
57 #include <linux/dma-mapping.h>
58 #include <linux/sort.h>
60 #include <linux/time.h>
61 #include <linux/aer.h>
63 #include "mpt2sas_base.h"
65 static MPT_CALLBACK mpt_callbacks
[MPT_MAX_CALLBACKS
];
67 #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
68 #define MPT2SAS_MAX_REQUEST_QUEUE 600 /* maximum controller queue depth */
70 static int max_queue_depth
= -1;
71 module_param(max_queue_depth
, int, 0);
72 MODULE_PARM_DESC(max_queue_depth
, " max controller queue depth ");
74 static int max_sgl_entries
= -1;
75 module_param(max_sgl_entries
, int, 0);
76 MODULE_PARM_DESC(max_sgl_entries
, " max sg entries ");
78 static int msix_disable
= -1;
79 module_param(msix_disable
, int, 0);
80 MODULE_PARM_DESC(msix_disable
, " disable msix routed interrupts (default=0)");
82 /* diag_buffer_enable is bitwise
84 * bit 1 set = SNAPSHOT
85 * bit 2 set = EXTENDED
87 * Either bit can be set, or both
89 static int diag_buffer_enable
;
90 module_param(diag_buffer_enable
, int, 0);
91 MODULE_PARM_DESC(diag_buffer_enable
, " post diag buffers "
92 "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
94 int mpt2sas_fwfault_debug
;
95 MODULE_PARM_DESC(mpt2sas_fwfault_debug
, " enable detection of firmware fault "
96 "and halt firmware - (default=0)");
99 * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
103 _scsih_set_fwfault_debug(const char *val
, struct kernel_param
*kp
)
105 int ret
= param_set_int(val
, kp
);
106 struct MPT2SAS_ADAPTER
*ioc
;
111 printk(KERN_INFO
"setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug
);
112 list_for_each_entry(ioc
, &mpt2sas_ioc_list
, list
)
113 ioc
->fwfault_debug
= mpt2sas_fwfault_debug
;
116 module_param_call(mpt2sas_fwfault_debug
, _scsih_set_fwfault_debug
,
117 param_get_int
, &mpt2sas_fwfault_debug
, 0644);
120 * _base_fault_reset_work - workq handling ioc fault conditions
121 * @work: input argument, used to derive ioc
127 _base_fault_reset_work(struct work_struct
*work
)
129 struct MPT2SAS_ADAPTER
*ioc
=
130 container_of(work
, struct MPT2SAS_ADAPTER
, fault_reset_work
.work
);
135 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
136 if (ioc
->shost_recovery
)
138 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
140 doorbell
= mpt2sas_base_get_iocstate(ioc
, 0);
141 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
) {
142 rc
= mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
144 printk(MPT2SAS_WARN_FMT
"%s: hard reset: %s\n", ioc
->name
,
145 __func__
, (rc
== 0) ? "success" : "failed");
146 doorbell
= mpt2sas_base_get_iocstate(ioc
, 0);
147 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
)
148 mpt2sas_base_fault_info(ioc
, doorbell
&
149 MPI2_DOORBELL_DATA_MASK
);
152 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
154 if (ioc
->fault_reset_work_q
)
155 queue_delayed_work(ioc
->fault_reset_work_q
,
156 &ioc
->fault_reset_work
,
157 msecs_to_jiffies(FAULT_POLLING_INTERVAL
));
158 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
162 * mpt2sas_base_start_watchdog - start the fault_reset_work_q
163 * @ioc: per adapter object
169 mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER
*ioc
)
173 if (ioc
->fault_reset_work_q
)
176 /* initialize fault polling */
177 INIT_DELAYED_WORK(&ioc
->fault_reset_work
, _base_fault_reset_work
);
178 snprintf(ioc
->fault_reset_work_q_name
,
179 sizeof(ioc
->fault_reset_work_q_name
), "poll_%d_status", ioc
->id
);
180 ioc
->fault_reset_work_q
=
181 create_singlethread_workqueue(ioc
->fault_reset_work_q_name
);
182 if (!ioc
->fault_reset_work_q
) {
183 printk(MPT2SAS_ERR_FMT
"%s: failed (line=%d)\n",
184 ioc
->name
, __func__
, __LINE__
);
187 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
188 if (ioc
->fault_reset_work_q
)
189 queue_delayed_work(ioc
->fault_reset_work_q
,
190 &ioc
->fault_reset_work
,
191 msecs_to_jiffies(FAULT_POLLING_INTERVAL
));
192 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
196 * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
197 * @ioc: per adapter object
203 mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER
*ioc
)
206 struct workqueue_struct
*wq
;
208 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
209 wq
= ioc
->fault_reset_work_q
;
210 ioc
->fault_reset_work_q
= NULL
;
211 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
213 if (!cancel_delayed_work(&ioc
->fault_reset_work
))
215 destroy_workqueue(wq
);
220 * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
221 * @ioc: per adapter object
222 * @fault_code: fault code
227 mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER
*ioc
, u16 fault_code
)
229 printk(MPT2SAS_ERR_FMT
"fault_state(0x%04x)!\n",
230 ioc
->name
, fault_code
);
234 * mpt2sas_halt_firmware - halt's mpt controller firmware
235 * @ioc: per adapter object
237 * For debugging timeout related issues. Writing 0xCOFFEE00
238 * to the doorbell register will halt controller firmware. With
239 * the purpose to stop both driver and firmware, the enduser can
240 * obtain a ring buffer from controller UART.
243 mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER
*ioc
)
247 if (!ioc
->fwfault_debug
)
252 doorbell
= readl(&ioc
->chip
->Doorbell
);
253 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
)
254 mpt2sas_base_fault_info(ioc
, doorbell
);
256 writel(0xC0FFEE00, &ioc
->chip
->Doorbell
);
257 printk(MPT2SAS_ERR_FMT
"Firmware is halted due to command "
258 "timeout\n", ioc
->name
);
261 panic("panic in %s\n", __func__
);
264 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
266 * _base_sas_ioc_info - verbose translation of the ioc status
267 * @ioc: per adapter object
268 * @mpi_reply: reply mf payload returned from firmware
269 * @request_hdr: request mf
274 _base_sas_ioc_info(struct MPT2SAS_ADAPTER
*ioc
, MPI2DefaultReply_t
*mpi_reply
,
275 MPI2RequestHeader_t
*request_hdr
)
277 u16 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
) &
281 char *func_str
= NULL
;
283 /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
284 if (request_hdr
->Function
== MPI2_FUNCTION_SCSI_IO_REQUEST
||
285 request_hdr
->Function
== MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH
||
286 request_hdr
->Function
== MPI2_FUNCTION_EVENT_NOTIFICATION
)
289 if (ioc_status
== MPI2_IOCSTATUS_CONFIG_INVALID_PAGE
)
292 switch (ioc_status
) {
294 /****************************************************************************
295 * Common IOCStatus values for all replies
296 ****************************************************************************/
298 case MPI2_IOCSTATUS_INVALID_FUNCTION
:
299 desc
= "invalid function";
301 case MPI2_IOCSTATUS_BUSY
:
304 case MPI2_IOCSTATUS_INVALID_SGL
:
305 desc
= "invalid sgl";
307 case MPI2_IOCSTATUS_INTERNAL_ERROR
:
308 desc
= "internal error";
310 case MPI2_IOCSTATUS_INVALID_VPID
:
311 desc
= "invalid vpid";
313 case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES
:
314 desc
= "insufficient resources";
316 case MPI2_IOCSTATUS_INVALID_FIELD
:
317 desc
= "invalid field";
319 case MPI2_IOCSTATUS_INVALID_STATE
:
320 desc
= "invalid state";
322 case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED
:
323 desc
= "op state not supported";
326 /****************************************************************************
327 * Config IOCStatus values
328 ****************************************************************************/
330 case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION
:
331 desc
= "config invalid action";
333 case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE
:
334 desc
= "config invalid type";
336 case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE
:
337 desc
= "config invalid page";
339 case MPI2_IOCSTATUS_CONFIG_INVALID_DATA
:
340 desc
= "config invalid data";
342 case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS
:
343 desc
= "config no defaults";
345 case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT
:
346 desc
= "config cant commit";
349 /****************************************************************************
351 ****************************************************************************/
353 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR
:
354 case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE
:
355 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE
:
356 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN
:
357 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN
:
358 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR
:
359 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR
:
360 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED
:
361 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH
:
362 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED
:
363 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED
:
364 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED
:
367 /****************************************************************************
368 * For use by SCSI Initiator and SCSI Target end-to-end data protection
369 ****************************************************************************/
371 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR
:
372 desc
= "eedp guard error";
374 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR
:
375 desc
= "eedp ref tag error";
377 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR
:
378 desc
= "eedp app tag error";
381 /****************************************************************************
383 ****************************************************************************/
385 case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX
:
386 desc
= "target invalid io index";
388 case MPI2_IOCSTATUS_TARGET_ABORTED
:
389 desc
= "target aborted";
391 case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE
:
392 desc
= "target no conn retryable";
394 case MPI2_IOCSTATUS_TARGET_NO_CONNECTION
:
395 desc
= "target no connection";
397 case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH
:
398 desc
= "target xfer count mismatch";
400 case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR
:
401 desc
= "target data offset error";
403 case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA
:
404 desc
= "target too much write data";
406 case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT
:
407 desc
= "target iu too short";
409 case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT
:
410 desc
= "target ack nak timeout";
412 case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED
:
413 desc
= "target nak received";
416 /****************************************************************************
417 * Serial Attached SCSI values
418 ****************************************************************************/
420 case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED
:
421 desc
= "smp request failed";
423 case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN
:
424 desc
= "smp data overrun";
427 /****************************************************************************
428 * Diagnostic Buffer Post / Diagnostic Release values
429 ****************************************************************************/
431 case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
:
432 desc
= "diagnostic released";
441 switch (request_hdr
->Function
) {
442 case MPI2_FUNCTION_CONFIG
:
443 frame_sz
= sizeof(Mpi2ConfigRequest_t
) + ioc
->sge_size
;
444 func_str
= "config_page";
446 case MPI2_FUNCTION_SCSI_TASK_MGMT
:
447 frame_sz
= sizeof(Mpi2SCSITaskManagementRequest_t
);
448 func_str
= "task_mgmt";
450 case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL
:
451 frame_sz
= sizeof(Mpi2SasIoUnitControlRequest_t
);
452 func_str
= "sas_iounit_ctl";
454 case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR
:
455 frame_sz
= sizeof(Mpi2SepRequest_t
);
456 func_str
= "enclosure";
458 case MPI2_FUNCTION_IOC_INIT
:
459 frame_sz
= sizeof(Mpi2IOCInitRequest_t
);
460 func_str
= "ioc_init";
462 case MPI2_FUNCTION_PORT_ENABLE
:
463 frame_sz
= sizeof(Mpi2PortEnableRequest_t
);
464 func_str
= "port_enable";
466 case MPI2_FUNCTION_SMP_PASSTHROUGH
:
467 frame_sz
= sizeof(Mpi2SmpPassthroughRequest_t
) + ioc
->sge_size
;
468 func_str
= "smp_passthru";
472 func_str
= "unknown";
476 printk(MPT2SAS_WARN_FMT
"ioc_status: %s(0x%04x), request(0x%p),"
477 " (%s)\n", ioc
->name
, desc
, ioc_status
, request_hdr
, func_str
);
479 _debug_dump_mf(request_hdr
, frame_sz
/4);
483 * _base_display_event_data - verbose translation of firmware asyn events
484 * @ioc: per adapter object
485 * @mpi_reply: reply mf payload returned from firmware
490 _base_display_event_data(struct MPT2SAS_ADAPTER
*ioc
,
491 Mpi2EventNotificationReply_t
*mpi_reply
)
496 if (!(ioc
->logging_level
& MPT_DEBUG_EVENTS
))
499 event
= le16_to_cpu(mpi_reply
->Event
);
502 case MPI2_EVENT_LOG_DATA
:
505 case MPI2_EVENT_STATE_CHANGE
:
506 desc
= "Status Change";
508 case MPI2_EVENT_HARD_RESET_RECEIVED
:
509 desc
= "Hard Reset Received";
511 case MPI2_EVENT_EVENT_CHANGE
:
512 desc
= "Event Change";
514 case MPI2_EVENT_TASK_SET_FULL
:
515 desc
= "Task Set Full";
517 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
:
518 desc
= "Device Status Change";
520 case MPI2_EVENT_IR_OPERATION_STATUS
:
521 desc
= "IR Operation Status";
523 case MPI2_EVENT_SAS_DISCOVERY
:
525 Mpi2EventDataSasDiscovery_t
*event_data
=
526 (Mpi2EventDataSasDiscovery_t
*)mpi_reply
->EventData
;
527 printk(MPT2SAS_INFO_FMT
"Discovery: (%s)", ioc
->name
,
528 (event_data
->ReasonCode
== MPI2_EVENT_SAS_DISC_RC_STARTED
) ?
530 if (event_data
->DiscoveryStatus
)
531 printk("discovery_status(0x%08x)",
532 le32_to_cpu(event_data
->DiscoveryStatus
));
536 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE
:
537 desc
= "SAS Broadcast Primitive";
539 case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE
:
540 desc
= "SAS Init Device Status Change";
542 case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW
:
543 desc
= "SAS Init Table Overflow";
545 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
:
546 desc
= "SAS Topology Change List";
548 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
:
549 desc
= "SAS Enclosure Device Status Change";
551 case MPI2_EVENT_IR_VOLUME
:
554 case MPI2_EVENT_IR_PHYSICAL_DISK
:
555 desc
= "IR Physical Disk";
557 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST
:
558 desc
= "IR Configuration Change List";
560 case MPI2_EVENT_LOG_ENTRY_ADDED
:
561 desc
= "Log Entry Added";
568 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
, desc
);
573 * _base_sas_log_info - verbose translation of firmware log info
574 * @ioc: per adapter object
575 * @log_info: log info
580 _base_sas_log_info(struct MPT2SAS_ADAPTER
*ioc
, u32 log_info
)
591 union loginfo_type sas_loginfo
;
592 char *originator_str
= NULL
;
594 sas_loginfo
.loginfo
= log_info
;
595 if (sas_loginfo
.dw
.bus_type
!= 3 /*SAS*/)
598 /* each nexus loss loginfo */
599 if (log_info
== 0x31170000)
602 /* eat the loginfos associated with task aborts */
603 if (ioc
->ignore_loginfos
&& (log_info
== 30050000 || log_info
==
604 0x31140000 || log_info
== 0x31130000))
607 switch (sas_loginfo
.dw
.originator
) {
609 originator_str
= "IOP";
612 originator_str
= "PL";
615 originator_str
= "IR";
619 printk(MPT2SAS_WARN_FMT
"log_info(0x%08x): originator(%s), "
620 "code(0x%02x), sub_code(0x%04x)\n", ioc
->name
, log_info
,
621 originator_str
, sas_loginfo
.dw
.code
,
622 sas_loginfo
.dw
.subcode
);
626 * _base_display_reply_info -
627 * @ioc: per adapter object
628 * @smid: system request message index
629 * @msix_index: MSIX table index supplied by the OS
630 * @reply: reply message frame(lower 32bit addr)
635 _base_display_reply_info(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
638 MPI2DefaultReply_t
*mpi_reply
;
641 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
642 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
);
643 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
644 if ((ioc_status
& MPI2_IOCSTATUS_MASK
) &&
645 (ioc
->logging_level
& MPT_DEBUG_REPLY
)) {
646 _base_sas_ioc_info(ioc
, mpi_reply
,
647 mpt2sas_base_get_msg_frame(ioc
, smid
));
650 if (ioc_status
& MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE
)
651 _base_sas_log_info(ioc
, le32_to_cpu(mpi_reply
->IOCLogInfo
));
655 * mpt2sas_base_done - base internal command completion routine
656 * @ioc: per adapter object
657 * @smid: system request message index
658 * @msix_index: MSIX table index supplied by the OS
659 * @reply: reply message frame(lower 32bit addr)
661 * Return 1 meaning mf should be freed from _base_interrupt
662 * 0 means the mf is freed from this function.
665 mpt2sas_base_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
668 MPI2DefaultReply_t
*mpi_reply
;
670 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
671 if (mpi_reply
&& mpi_reply
->Function
== MPI2_FUNCTION_EVENT_ACK
)
674 if (ioc
->base_cmds
.status
== MPT2_CMD_NOT_USED
)
677 ioc
->base_cmds
.status
|= MPT2_CMD_COMPLETE
;
679 ioc
->base_cmds
.status
|= MPT2_CMD_REPLY_VALID
;
680 memcpy(ioc
->base_cmds
.reply
, mpi_reply
, mpi_reply
->MsgLength
*4);
682 ioc
->base_cmds
.status
&= ~MPT2_CMD_PENDING
;
683 complete(&ioc
->base_cmds
.done
);
688 * _base_async_event - main callback handler for firmware asyn events
689 * @ioc: per adapter object
690 * @msix_index: MSIX table index supplied by the OS
691 * @reply: reply message frame(lower 32bit addr)
693 * Return 1 meaning mf should be freed from _base_interrupt
694 * 0 means the mf is freed from this function.
697 _base_async_event(struct MPT2SAS_ADAPTER
*ioc
, u8 msix_index
, u32 reply
)
699 Mpi2EventNotificationReply_t
*mpi_reply
;
700 Mpi2EventAckRequest_t
*ack_request
;
703 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
706 if (mpi_reply
->Function
!= MPI2_FUNCTION_EVENT_NOTIFICATION
)
708 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
709 _base_display_event_data(ioc
, mpi_reply
);
711 if (!(mpi_reply
->AckRequired
& MPI2_EVENT_NOTIFICATION_ACK_REQUIRED
))
713 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
715 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
716 ioc
->name
, __func__
);
720 ack_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
721 memset(ack_request
, 0, sizeof(Mpi2EventAckRequest_t
));
722 ack_request
->Function
= MPI2_FUNCTION_EVENT_ACK
;
723 ack_request
->Event
= mpi_reply
->Event
;
724 ack_request
->EventContext
= mpi_reply
->EventContext
;
725 ack_request
->VF_ID
= 0; /* TODO */
726 ack_request
->VP_ID
= 0;
727 mpt2sas_base_put_smid_default(ioc
, smid
);
731 /* scsih callback handler */
732 mpt2sas_scsih_event_callback(ioc
, msix_index
, reply
);
734 /* ctl callback handler */
735 mpt2sas_ctl_event_callback(ioc
, msix_index
, reply
);
741 * _base_get_cb_idx - obtain the callback index
742 * @ioc: per adapter object
743 * @smid: system request message index
745 * Return callback index.
748 _base_get_cb_idx(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
753 if (smid
>= ioc
->hi_priority_smid
) {
754 if (smid
< ioc
->internal_smid
) {
755 i
= smid
- ioc
->hi_priority_smid
;
756 cb_idx
= ioc
->hpr_lookup
[i
].cb_idx
;
758 i
= smid
- ioc
->internal_smid
;
759 cb_idx
= ioc
->internal_lookup
[i
].cb_idx
;
763 cb_idx
= ioc
->scsi_lookup
[i
].cb_idx
;
769 * _base_mask_interrupts - disable interrupts
770 * @ioc: per adapter object
772 * Disabling ResetIRQ, Reply and Doorbell Interrupts
777 _base_mask_interrupts(struct MPT2SAS_ADAPTER
*ioc
)
781 ioc
->mask_interrupts
= 1;
782 him_register
= readl(&ioc
->chip
->HostInterruptMask
);
783 him_register
|= MPI2_HIM_DIM
+ MPI2_HIM_RIM
+ MPI2_HIM_RESET_IRQ_MASK
;
784 writel(him_register
, &ioc
->chip
->HostInterruptMask
);
785 readl(&ioc
->chip
->HostInterruptMask
);
789 * _base_unmask_interrupts - enable interrupts
790 * @ioc: per adapter object
792 * Enabling only Reply Interrupts
797 _base_unmask_interrupts(struct MPT2SAS_ADAPTER
*ioc
)
801 him_register
= readl(&ioc
->chip
->HostInterruptMask
);
802 him_register
&= ~MPI2_HIM_RIM
;
803 writel(him_register
, &ioc
->chip
->HostInterruptMask
);
804 ioc
->mask_interrupts
= 0;
807 union reply_descriptor
{
816 * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
817 * @irq: irq number (not used)
818 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
819 * @r: pt_regs pointer (not used)
821 * Return IRQ_HANDLE if processed, else IRQ_NONE.
824 _base_interrupt(int irq
, void *bus_id
)
826 union reply_descriptor rd
;
828 u8 request_desript_type
;
833 struct MPT2SAS_ADAPTER
*ioc
= bus_id
;
834 Mpi2ReplyDescriptorsUnion_t
*rpf
;
837 if (ioc
->mask_interrupts
)
840 rpf
= &ioc
->reply_post_free
[ioc
->reply_post_host_index
];
841 request_desript_type
= rpf
->Default
.ReplyFlags
842 & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK
;
843 if (request_desript_type
== MPI2_RPY_DESCRIPT_FLAGS_UNUSED
)
848 rd
.word
= rpf
->Words
;
849 if (rd
.u
.low
== UINT_MAX
|| rd
.u
.high
== UINT_MAX
)
853 smid
= le16_to_cpu(rpf
->Default
.DescriptorTypeDependent1
);
854 msix_index
= rpf
->Default
.MSIxIndex
;
855 if (request_desript_type
==
856 MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY
) {
858 (rpf
->AddressReply
.ReplyFrameAddress
);
859 } else if (request_desript_type
==
860 MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER
)
862 else if (request_desript_type
==
863 MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS
)
866 cb_idx
= _base_get_cb_idx(ioc
, smid
);
867 if (smid
&& cb_idx
!= 0xFF) {
868 rc
= mpt_callbacks
[cb_idx
](ioc
, smid
, msix_index
,
871 _base_display_reply_info(ioc
, smid
, msix_index
,
874 mpt2sas_base_free_smid(ioc
, smid
);
877 _base_async_event(ioc
, msix_index
, reply
);
879 /* reply free queue handling */
881 ioc
->reply_free_host_index
=
882 (ioc
->reply_free_host_index
==
883 (ioc
->reply_free_queue_depth
- 1)) ?
884 0 : ioc
->reply_free_host_index
+ 1;
885 ioc
->reply_free
[ioc
->reply_free_host_index
] =
888 writel(ioc
->reply_free_host_index
,
889 &ioc
->chip
->ReplyFreeHostIndex
);
894 rpf
->Words
= ULLONG_MAX
;
895 ioc
->reply_post_host_index
= (ioc
->reply_post_host_index
==
896 (ioc
->reply_post_queue_depth
- 1)) ? 0 :
897 ioc
->reply_post_host_index
+ 1;
898 request_desript_type
=
899 ioc
->reply_post_free
[ioc
->reply_post_host_index
].Default
.
900 ReplyFlags
& MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK
;
902 if (request_desript_type
== MPI2_RPY_DESCRIPT_FLAGS_UNUSED
)
904 if (!ioc
->reply_post_host_index
)
905 rpf
= ioc
->reply_post_free
;
916 writel(ioc
->reply_post_host_index
, &ioc
->chip
->ReplyPostHostIndex
);
921 * mpt2sas_base_release_callback_handler - clear interupt callback handler
922 * @cb_idx: callback index
927 mpt2sas_base_release_callback_handler(u8 cb_idx
)
929 mpt_callbacks
[cb_idx
] = NULL
;
933 * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler
934 * @cb_func: callback function
939 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func
)
943 for (cb_idx
= MPT_MAX_CALLBACKS
-1; cb_idx
; cb_idx
--)
944 if (mpt_callbacks
[cb_idx
] == NULL
)
947 mpt_callbacks
[cb_idx
] = cb_func
;
952 * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler
957 mpt2sas_base_initialize_callback_handler(void)
961 for (cb_idx
= 0; cb_idx
< MPT_MAX_CALLBACKS
; cb_idx
++)
962 mpt2sas_base_release_callback_handler(cb_idx
);
966 * mpt2sas_base_build_zero_len_sge - build zero length sg entry
967 * @ioc: per adapter object
968 * @paddr: virtual address for SGE
970 * Create a zero length scatter gather entry to insure the IOCs hardware has
971 * something to use if the target device goes brain dead and tries
972 * to send data even when none is asked for.
977 mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER
*ioc
, void *paddr
)
979 u32 flags_length
= (u32
)((MPI2_SGE_FLAGS_LAST_ELEMENT
|
980 MPI2_SGE_FLAGS_END_OF_BUFFER
| MPI2_SGE_FLAGS_END_OF_LIST
|
981 MPI2_SGE_FLAGS_SIMPLE_ELEMENT
) <<
982 MPI2_SGE_FLAGS_SHIFT
);
983 ioc
->base_add_sg_single(paddr
, flags_length
, -1);
987 * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
988 * @paddr: virtual address for SGE
989 * @flags_length: SGE flags and data transfer length
990 * @dma_addr: Physical address
995 _base_add_sg_single_32(void *paddr
, u32 flags_length
, dma_addr_t dma_addr
)
997 Mpi2SGESimple32_t
*sgel
= paddr
;
999 flags_length
|= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING
|
1000 MPI2_SGE_FLAGS_SYSTEM_ADDRESS
) << MPI2_SGE_FLAGS_SHIFT
;
1001 sgel
->FlagsLength
= cpu_to_le32(flags_length
);
1002 sgel
->Address
= cpu_to_le32(dma_addr
);
1007 * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
1008 * @paddr: virtual address for SGE
1009 * @flags_length: SGE flags and data transfer length
1010 * @dma_addr: Physical address
1015 _base_add_sg_single_64(void *paddr
, u32 flags_length
, dma_addr_t dma_addr
)
1017 Mpi2SGESimple64_t
*sgel
= paddr
;
1019 flags_length
|= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING
|
1020 MPI2_SGE_FLAGS_SYSTEM_ADDRESS
) << MPI2_SGE_FLAGS_SHIFT
;
1021 sgel
->FlagsLength
= cpu_to_le32(flags_length
);
1022 sgel
->Address
= cpu_to_le64(dma_addr
);
1025 #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
1028 * _base_config_dma_addressing - set dma addressing
1029 * @ioc: per adapter object
1030 * @pdev: PCI device struct
1032 * Returns 0 for success, non-zero for failure.
1035 _base_config_dma_addressing(struct MPT2SAS_ADAPTER
*ioc
, struct pci_dev
*pdev
)
1040 if (sizeof(dma_addr_t
) > 4) {
1041 const uint64_t required_mask
=
1042 dma_get_required_mask(&pdev
->dev
);
1043 if ((required_mask
> DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev
,
1044 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev
,
1045 DMA_BIT_MASK(64))) {
1046 ioc
->base_add_sg_single
= &_base_add_sg_single_64
;
1047 ioc
->sge_size
= sizeof(Mpi2SGESimple64_t
);
1053 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))
1054 && !pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32))) {
1055 ioc
->base_add_sg_single
= &_base_add_sg_single_32
;
1056 ioc
->sge_size
= sizeof(Mpi2SGESimple32_t
);
1063 printk(MPT2SAS_INFO_FMT
"%s BIT PCI BUS DMA ADDRESSING SUPPORTED, "
1064 "total mem (%ld kB)\n", ioc
->name
, desc
, convert_to_kb(s
.totalram
));
1070 * _base_save_msix_table - backup msix vector table
1071 * @ioc: per adapter object
1073 * This address an errata where diag reset clears out the table
1076 _base_save_msix_table(struct MPT2SAS_ADAPTER
*ioc
)
1080 if (!ioc
->msix_enable
|| ioc
->msix_table_backup
== NULL
)
1083 for (i
= 0; i
< ioc
->msix_vector_count
; i
++)
1084 ioc
->msix_table_backup
[i
] = ioc
->msix_table
[i
];
1088 * _base_restore_msix_table - this restores the msix vector table
1089 * @ioc: per adapter object
1093 _base_restore_msix_table(struct MPT2SAS_ADAPTER
*ioc
)
1097 if (!ioc
->msix_enable
|| ioc
->msix_table_backup
== NULL
)
1100 for (i
= 0; i
< ioc
->msix_vector_count
; i
++)
1101 ioc
->msix_table
[i
] = ioc
->msix_table_backup
[i
];
1105 * _base_check_enable_msix - checks MSIX capabable.
1106 * @ioc: per adapter object
1108 * Check to see if card is capable of MSIX, and set number
1109 * of avaliable msix vectors
1112 _base_check_enable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1115 u16 message_control
;
1116 u32 msix_table_offset
;
1118 base
= pci_find_capability(ioc
->pdev
, PCI_CAP_ID_MSIX
);
1120 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"msix not "
1121 "supported\n", ioc
->name
));
1125 /* get msix vector count */
1126 pci_read_config_word(ioc
->pdev
, base
+ 2, &message_control
);
1127 ioc
->msix_vector_count
= (message_control
& 0x3FF) + 1;
1129 /* get msix table */
1130 pci_read_config_dword(ioc
->pdev
, base
+ 4, &msix_table_offset
);
1131 msix_table_offset
&= 0xFFFFFFF8;
1132 ioc
->msix_table
= (u32
*)((void *)ioc
->chip
+ msix_table_offset
);
1134 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"msix is supported, "
1135 "vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc
->name
,
1136 ioc
->msix_vector_count
, msix_table_offset
, ioc
->msix_table
));
1141 * _base_disable_msix - disables msix
1142 * @ioc: per adapter object
1146 _base_disable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1148 if (ioc
->msix_enable
) {
1149 pci_disable_msix(ioc
->pdev
);
1150 kfree(ioc
->msix_table_backup
);
1151 ioc
->msix_table_backup
= NULL
;
1152 ioc
->msix_enable
= 0;
1157 * _base_enable_msix - enables msix, failback to io_apic
1158 * @ioc: per adapter object
1162 _base_enable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1164 struct msix_entry entries
;
1168 if (msix_disable
== -1 || msix_disable
== 0)
1174 if (_base_check_enable_msix(ioc
) != 0)
1177 ioc
->msix_table_backup
= kcalloc(ioc
->msix_vector_count
,
1178 sizeof(u32
), GFP_KERNEL
);
1179 if (!ioc
->msix_table_backup
) {
1180 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"allocation for "
1181 "msix_table_backup failed!!!\n", ioc
->name
));
1185 memset(&entries
, 0, sizeof(struct msix_entry
));
1186 r
= pci_enable_msix(ioc
->pdev
, &entries
, 1);
1188 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"pci_enable_msix "
1189 "failed (r=%d) !!!\n", ioc
->name
, r
));
1193 r
= request_irq(entries
.vector
, _base_interrupt
, IRQF_SHARED
,
1196 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"unable to allocate "
1197 "interrupt %d !!!\n", ioc
->name
, entries
.vector
));
1198 pci_disable_msix(ioc
->pdev
);
1202 ioc
->pci_irq
= entries
.vector
;
1203 ioc
->msix_enable
= 1;
1206 /* failback to io_apic interrupt routing */
1209 r
= request_irq(ioc
->pdev
->irq
, _base_interrupt
, IRQF_SHARED
,
1212 printk(MPT2SAS_ERR_FMT
"unable to allocate interrupt %d!\n",
1213 ioc
->name
, ioc
->pdev
->irq
);
1218 ioc
->pci_irq
= ioc
->pdev
->irq
;
1226 * mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
1227 * @ioc: per adapter object
1229 * Returns 0 for success, non-zero for failure.
1232 mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER
*ioc
)
1234 struct pci_dev
*pdev
= ioc
->pdev
;
1241 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n",
1242 ioc
->name
, __func__
));
1244 ioc
->bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
1245 if (pci_enable_device_mem(pdev
)) {
1246 printk(MPT2SAS_WARN_FMT
"pci_enable_device_mem: "
1247 "failed\n", ioc
->name
);
1252 if (pci_request_selected_regions(pdev
, ioc
->bars
,
1253 MPT2SAS_DRIVER_NAME
)) {
1254 printk(MPT2SAS_WARN_FMT
"pci_request_selected_regions: "
1255 "failed\n", ioc
->name
);
1260 /* AER (Advanced Error Reporting) hooks */
1261 pci_enable_pcie_error_reporting(pdev
);
1263 pci_set_master(pdev
);
1265 if (_base_config_dma_addressing(ioc
, pdev
) != 0) {
1266 printk(MPT2SAS_WARN_FMT
"no suitable DMA mask for %s\n",
1267 ioc
->name
, pci_name(pdev
));
1272 for (i
= 0, memap_sz
= 0, pio_sz
= 0 ; i
< DEVICE_COUNT_RESOURCE
; i
++) {
1273 if (pci_resource_flags(pdev
, i
) & IORESOURCE_IO
) {
1276 pio_chip
= (u64
)pci_resource_start(pdev
, i
);
1277 pio_sz
= pci_resource_len(pdev
, i
);
1281 /* verify memory resource is valid before using */
1282 if (pci_resource_flags(pdev
, i
) & IORESOURCE_MEM
) {
1283 ioc
->chip_phys
= pci_resource_start(pdev
, i
);
1284 chip_phys
= (u64
)ioc
->chip_phys
;
1285 memap_sz
= pci_resource_len(pdev
, i
);
1286 ioc
->chip
= ioremap(ioc
->chip_phys
, memap_sz
);
1287 if (ioc
->chip
== NULL
) {
1288 printk(MPT2SAS_ERR_FMT
"unable to map "
1289 "adapter memory!\n", ioc
->name
);
1297 _base_mask_interrupts(ioc
);
1298 r
= _base_enable_msix(ioc
);
1302 printk(MPT2SAS_INFO_FMT
"%s: IRQ %d\n",
1303 ioc
->name
, ((ioc
->msix_enable
) ? "PCI-MSI-X enabled" :
1304 "IO-APIC enabled"), ioc
->pci_irq
);
1305 printk(MPT2SAS_INFO_FMT
"iomem(0x%016llx), mapped(0x%p), size(%d)\n",
1306 ioc
->name
, (unsigned long long)chip_phys
, ioc
->chip
, memap_sz
);
1307 printk(MPT2SAS_INFO_FMT
"ioport(0x%016llx), size(%d)\n",
1308 ioc
->name
, (unsigned long long)pio_chip
, pio_sz
);
1317 pci_release_selected_regions(ioc
->pdev
, ioc
->bars
);
1318 pci_disable_pcie_error_reporting(pdev
);
1319 pci_disable_device(pdev
);
1324 * mpt2sas_base_get_msg_frame - obtain request mf pointer
1325 * @ioc: per adapter object
1326 * @smid: system request message index(smid zero is invalid)
1328 * Returns virt pointer to message frame.
1331 mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1333 return (void *)(ioc
->request
+ (smid
* ioc
->request_sz
));
1337 * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request
1338 * @ioc: per adapter object
1339 * @smid: system request message index
1341 * Returns virt pointer to sense buffer.
1344 mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1346 return (void *)(ioc
->sense
+ ((smid
- 1) * SCSI_SENSE_BUFFERSIZE
));
1350 * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request
1351 * @ioc: per adapter object
1352 * @smid: system request message index
1354 * Returns phys pointer to the low 32bit address of the sense buffer.
1357 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1359 return cpu_to_le32(ioc
->sense_dma
+
1360 ((smid
- 1) * SCSI_SENSE_BUFFERSIZE
));
1364 * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address
1365 * @ioc: per adapter object
1366 * @phys_addr: lower 32 physical addr of the reply
1368 * Converts 32bit lower physical addr into a virt address.
1371 mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER
*ioc
, u32 phys_addr
)
1375 return ioc
->reply
+ (phys_addr
- (u32
)ioc
->reply_dma
);
1379 * mpt2sas_base_get_smid - obtain a free smid from internal queue
1380 * @ioc: per adapter object
1381 * @cb_idx: callback index
1383 * Returns smid (zero is invalid)
1386 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
)
1388 unsigned long flags
;
1389 struct request_tracker
*request
;
1392 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1393 if (list_empty(&ioc
->internal_free_list
)) {
1394 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1395 printk(MPT2SAS_ERR_FMT
"%s: smid not available\n",
1396 ioc
->name
, __func__
);
1400 request
= list_entry(ioc
->internal_free_list
.next
,
1401 struct request_tracker
, tracker_list
);
1402 request
->cb_idx
= cb_idx
;
1403 smid
= request
->smid
;
1404 list_del(&request
->tracker_list
);
1405 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1410 * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
1411 * @ioc: per adapter object
1412 * @cb_idx: callback index
1413 * @scmd: pointer to scsi command object
1415 * Returns smid (zero is invalid)
1418 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
,
1419 struct scsi_cmnd
*scmd
)
1421 unsigned long flags
;
1422 struct request_tracker
*request
;
1425 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1426 if (list_empty(&ioc
->free_list
)) {
1427 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1428 printk(MPT2SAS_ERR_FMT
"%s: smid not available\n",
1429 ioc
->name
, __func__
);
1433 request
= list_entry(ioc
->free_list
.next
,
1434 struct request_tracker
, tracker_list
);
1435 request
->scmd
= scmd
;
1436 request
->cb_idx
= cb_idx
;
1437 smid
= request
->smid
;
1438 list_del(&request
->tracker_list
);
1439 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1444 * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
1445 * @ioc: per adapter object
1446 * @cb_idx: callback index
1448 * Returns smid (zero is invalid)
1451 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
)
1453 unsigned long flags
;
1454 struct request_tracker
*request
;
1457 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1458 if (list_empty(&ioc
->hpr_free_list
)) {
1459 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1463 request
= list_entry(ioc
->hpr_free_list
.next
,
1464 struct request_tracker
, tracker_list
);
1465 request
->cb_idx
= cb_idx
;
1466 smid
= request
->smid
;
1467 list_del(&request
->tracker_list
);
1468 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1474 * mpt2sas_base_free_smid - put smid back on free_list
1475 * @ioc: per adapter object
1476 * @smid: system request message index
1481 mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1483 unsigned long flags
;
1486 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1487 if (smid
>= ioc
->hi_priority_smid
) {
1488 if (smid
< ioc
->internal_smid
) {
1490 i
= smid
- ioc
->hi_priority_smid
;
1491 ioc
->hpr_lookup
[i
].cb_idx
= 0xFF;
1492 list_add_tail(&ioc
->hpr_lookup
[i
].tracker_list
,
1493 &ioc
->hpr_free_list
);
1495 /* internal queue */
1496 i
= smid
- ioc
->internal_smid
;
1497 ioc
->internal_lookup
[i
].cb_idx
= 0xFF;
1498 list_add_tail(&ioc
->internal_lookup
[i
].tracker_list
,
1499 &ioc
->internal_free_list
);
1501 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1507 ioc
->scsi_lookup
[i
].cb_idx
= 0xFF;
1508 ioc
->scsi_lookup
[i
].scmd
= NULL
;
1509 list_add_tail(&ioc
->scsi_lookup
[i
].tracker_list
,
1511 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1514 * See _wait_for_commands_to_complete() call with regards to this code.
1516 if (ioc
->shost_recovery
&& ioc
->pending_io_count
) {
1517 if (ioc
->pending_io_count
== 1)
1518 wake_up(&ioc
->reset_wq
);
1519 ioc
->pending_io_count
--;
1524 * _base_writeq - 64 bit write to MMIO
1525 * @ioc: per adapter object
1527 * @addr: address in MMIO space
1528 * @writeq_lock: spin lock
1530 * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
1531 * care of 32 bit environment where its not quarenteed to send the entire word
1535 static inline void _base_writeq(__u64 b
, volatile void __iomem
*addr
,
1536 spinlock_t
*writeq_lock
)
1538 unsigned long flags
;
1539 __u64 data_out
= cpu_to_le64(b
);
1541 spin_lock_irqsave(writeq_lock
, flags
);
1542 writel((u32
)(data_out
), addr
);
1543 writel((u32
)(data_out
>> 32), (addr
+ 4));
1544 spin_unlock_irqrestore(writeq_lock
, flags
);
1547 static inline void _base_writeq(__u64 b
, volatile void __iomem
*addr
,
1548 spinlock_t
*writeq_lock
)
1550 writeq(cpu_to_le64(b
), addr
);
1555 * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
1556 * @ioc: per adapter object
1557 * @smid: system request message index
1558 * @handle: device handle
1563 mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u16 handle
)
1565 Mpi2RequestDescriptorUnion_t descriptor
;
1566 u64
*request
= (u64
*)&descriptor
;
1569 descriptor
.SCSIIO
.RequestFlags
= MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO
;
1570 descriptor
.SCSIIO
.MSIxIndex
= 0; /* TODO */
1571 descriptor
.SCSIIO
.SMID
= cpu_to_le16(smid
);
1572 descriptor
.SCSIIO
.DevHandle
= cpu_to_le16(handle
);
1573 descriptor
.SCSIIO
.LMID
= 0;
1574 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1575 &ioc
->scsi_lookup_lock
);
1580 * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
1581 * @ioc: per adapter object
1582 * @smid: system request message index
1587 mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1589 Mpi2RequestDescriptorUnion_t descriptor
;
1590 u64
*request
= (u64
*)&descriptor
;
1592 descriptor
.HighPriority
.RequestFlags
=
1593 MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
;
1594 descriptor
.HighPriority
.MSIxIndex
= 0; /* TODO */
1595 descriptor
.HighPriority
.SMID
= cpu_to_le16(smid
);
1596 descriptor
.HighPriority
.LMID
= 0;
1597 descriptor
.HighPriority
.Reserved1
= 0;
1598 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1599 &ioc
->scsi_lookup_lock
);
1603 * mpt2sas_base_put_smid_default - Default, primarily used for config pages
1604 * @ioc: per adapter object
1605 * @smid: system request message index
1610 mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1612 Mpi2RequestDescriptorUnion_t descriptor
;
1613 u64
*request
= (u64
*)&descriptor
;
1615 descriptor
.Default
.RequestFlags
= MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE
;
1616 descriptor
.Default
.MSIxIndex
= 0; /* TODO */
1617 descriptor
.Default
.SMID
= cpu_to_le16(smid
);
1618 descriptor
.Default
.LMID
= 0;
1619 descriptor
.Default
.DescriptorTypeDependent
= 0;
1620 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1621 &ioc
->scsi_lookup_lock
);
1625 * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
1626 * @ioc: per adapter object
1627 * @smid: system request message index
1628 * @io_index: value used to track the IO
1633 mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
,
1636 Mpi2RequestDescriptorUnion_t descriptor
;
1637 u64
*request
= (u64
*)&descriptor
;
1639 descriptor
.SCSITarget
.RequestFlags
=
1640 MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET
;
1641 descriptor
.SCSITarget
.MSIxIndex
= 0; /* TODO */
1642 descriptor
.SCSITarget
.SMID
= cpu_to_le16(smid
);
1643 descriptor
.SCSITarget
.LMID
= 0;
1644 descriptor
.SCSITarget
.IoIndex
= cpu_to_le16(io_index
);
1645 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1646 &ioc
->scsi_lookup_lock
);
1650 * _base_display_dell_branding - Disply branding string
1651 * @ioc: per adapter object
1656 _base_display_dell_branding(struct MPT2SAS_ADAPTER
*ioc
)
1658 char dell_branding
[MPT2SAS_DELL_BRANDING_SIZE
];
1660 if (ioc
->pdev
->subsystem_vendor
!= PCI_VENDOR_ID_DELL
)
1663 memset(dell_branding
, 0, MPT2SAS_DELL_BRANDING_SIZE
);
1664 switch (ioc
->pdev
->subsystem_device
) {
1665 case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID
:
1666 strncpy(dell_branding
, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING
,
1667 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1669 case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID
:
1670 strncpy(dell_branding
, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING
,
1671 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1673 case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID
:
1674 strncpy(dell_branding
,
1675 MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING
,
1676 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1678 case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID
:
1679 strncpy(dell_branding
,
1680 MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING
,
1681 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1683 case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID
:
1684 strncpy(dell_branding
,
1685 MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING
,
1686 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1688 case MPT2SAS_DELL_PERC_H200_SSDID
:
1689 strncpy(dell_branding
, MPT2SAS_DELL_PERC_H200_BRANDING
,
1690 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1692 case MPT2SAS_DELL_6GBPS_SAS_SSDID
:
1693 strncpy(dell_branding
, MPT2SAS_DELL_6GBPS_SAS_BRANDING
,
1694 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1697 sprintf(dell_branding
, "0x%4X", ioc
->pdev
->subsystem_device
);
1701 printk(MPT2SAS_INFO_FMT
"%s: Vendor(0x%04X), Device(0x%04X),"
1702 " SSVID(0x%04X), SSDID(0x%04X)\n", ioc
->name
, dell_branding
,
1703 ioc
->pdev
->vendor
, ioc
->pdev
->device
, ioc
->pdev
->subsystem_vendor
,
1704 ioc
->pdev
->subsystem_device
);
1708 * _base_display_ioc_capabilities - Disply IOC's capabilities.
1709 * @ioc: per adapter object
1714 _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER
*ioc
)
1719 u32 iounit_pg1_flags
;
1721 pci_read_config_byte(ioc
->pdev
, PCI_CLASS_REVISION
, &revision
);
1722 strncpy(desc
, ioc
->manu_pg0
.ChipName
, 16);
1723 printk(MPT2SAS_INFO_FMT
"%s: FWVersion(%02d.%02d.%02d.%02d), "
1724 "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
1726 (ioc
->facts
.FWVersion
.Word
& 0xFF000000) >> 24,
1727 (ioc
->facts
.FWVersion
.Word
& 0x00FF0000) >> 16,
1728 (ioc
->facts
.FWVersion
.Word
& 0x0000FF00) >> 8,
1729 ioc
->facts
.FWVersion
.Word
& 0x000000FF,
1731 (ioc
->bios_pg3
.BiosVersion
& 0xFF000000) >> 24,
1732 (ioc
->bios_pg3
.BiosVersion
& 0x00FF0000) >> 16,
1733 (ioc
->bios_pg3
.BiosVersion
& 0x0000FF00) >> 8,
1734 ioc
->bios_pg3
.BiosVersion
& 0x000000FF);
1736 _base_display_dell_branding(ioc
);
1738 printk(MPT2SAS_INFO_FMT
"Protocol=(", ioc
->name
);
1740 if (ioc
->facts
.ProtocolFlags
& MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR
) {
1741 printk("Initiator");
1745 if (ioc
->facts
.ProtocolFlags
& MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET
) {
1746 printk("%sTarget", i
? "," : "");
1752 printk("Capabilities=(");
1754 if (ioc
->facts
.IOCCapabilities
&
1755 MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID
) {
1760 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_TLR
) {
1761 printk("%sTLR", i
? "," : "");
1765 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_MULTICAST
) {
1766 printk("%sMulticast", i
? "," : "");
1770 if (ioc
->facts
.IOCCapabilities
&
1771 MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET
) {
1772 printk("%sBIDI Target", i
? "," : "");
1776 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_EEDP
) {
1777 printk("%sEEDP", i
? "," : "");
1781 if (ioc
->facts
.IOCCapabilities
&
1782 MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER
) {
1783 printk("%sSnapshot Buffer", i
? "," : "");
1787 if (ioc
->facts
.IOCCapabilities
&
1788 MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER
) {
1789 printk("%sDiag Trace Buffer", i
? "," : "");
1793 if (ioc
->facts
.IOCCapabilities
&
1794 MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER
) {
1795 printk(KERN_INFO
"%sDiag Extended Buffer", i
? "," : "");
1799 if (ioc
->facts
.IOCCapabilities
&
1800 MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING
) {
1801 printk("%sTask Set Full", i
? "," : "");
1805 iounit_pg1_flags
= le32_to_cpu(ioc
->iounit_pg1
.Flags
);
1806 if (!(iounit_pg1_flags
& MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE
)) {
1807 printk("%sNCQ", i
? "," : "");
1815 * _base_static_config_pages - static start of day config pages
1816 * @ioc: per adapter object
1821 _base_static_config_pages(struct MPT2SAS_ADAPTER
*ioc
)
1823 Mpi2ConfigReply_t mpi_reply
;
1824 u32 iounit_pg1_flags
;
1826 mpt2sas_config_get_manufacturing_pg0(ioc
, &mpi_reply
, &ioc
->manu_pg0
);
1827 if (ioc
->ir_firmware
)
1828 mpt2sas_config_get_manufacturing_pg10(ioc
, &mpi_reply
,
1830 mpt2sas_config_get_bios_pg2(ioc
, &mpi_reply
, &ioc
->bios_pg2
);
1831 mpt2sas_config_get_bios_pg3(ioc
, &mpi_reply
, &ioc
->bios_pg3
);
1832 mpt2sas_config_get_ioc_pg8(ioc
, &mpi_reply
, &ioc
->ioc_pg8
);
1833 mpt2sas_config_get_iounit_pg0(ioc
, &mpi_reply
, &ioc
->iounit_pg0
);
1834 mpt2sas_config_get_iounit_pg1(ioc
, &mpi_reply
, &ioc
->iounit_pg1
);
1835 _base_display_ioc_capabilities(ioc
);
1838 * Enable task_set_full handling in iounit_pg1 when the
1839 * facts capabilities indicate that its supported.
1841 iounit_pg1_flags
= le32_to_cpu(ioc
->iounit_pg1
.Flags
);
1842 if ((ioc
->facts
.IOCCapabilities
&
1843 MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING
))
1845 ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING
;
1848 MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING
;
1849 ioc
->iounit_pg1
.Flags
= cpu_to_le32(iounit_pg1_flags
);
1850 mpt2sas_config_set_iounit_pg1(ioc
, &mpi_reply
, &ioc
->iounit_pg1
);
1854 * _base_release_memory_pools - release memory
1855 * @ioc: per adapter object
1857 * Free memory allocated from _base_allocate_memory_pools.
1862 _base_release_memory_pools(struct MPT2SAS_ADAPTER
*ioc
)
1864 dexitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
1868 pci_free_consistent(ioc
->pdev
, ioc
->request_dma_sz
,
1869 ioc
->request
, ioc
->request_dma
);
1870 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request_pool(0x%p)"
1871 ": free\n", ioc
->name
, ioc
->request
));
1872 ioc
->request
= NULL
;
1876 pci_pool_free(ioc
->sense_dma_pool
, ioc
->sense
, ioc
->sense_dma
);
1877 if (ioc
->sense_dma_pool
)
1878 pci_pool_destroy(ioc
->sense_dma_pool
);
1879 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"sense_pool(0x%p)"
1880 ": free\n", ioc
->name
, ioc
->sense
));
1885 pci_pool_free(ioc
->reply_dma_pool
, ioc
->reply
, ioc
->reply_dma
);
1886 if (ioc
->reply_dma_pool
)
1887 pci_pool_destroy(ioc
->reply_dma_pool
);
1888 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_pool(0x%p)"
1889 ": free\n", ioc
->name
, ioc
->reply
));
1893 if (ioc
->reply_free
) {
1894 pci_pool_free(ioc
->reply_free_dma_pool
, ioc
->reply_free
,
1895 ioc
->reply_free_dma
);
1896 if (ioc
->reply_free_dma_pool
)
1897 pci_pool_destroy(ioc
->reply_free_dma_pool
);
1898 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free_pool"
1899 "(0x%p): free\n", ioc
->name
, ioc
->reply_free
));
1900 ioc
->reply_free
= NULL
;
1903 if (ioc
->reply_post_free
) {
1904 pci_pool_free(ioc
->reply_post_free_dma_pool
,
1905 ioc
->reply_post_free
, ioc
->reply_post_free_dma
);
1906 if (ioc
->reply_post_free_dma_pool
)
1907 pci_pool_destroy(ioc
->reply_post_free_dma_pool
);
1908 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
1909 "reply_post_free_pool(0x%p): free\n", ioc
->name
,
1910 ioc
->reply_post_free
));
1911 ioc
->reply_post_free
= NULL
;
1914 if (ioc
->config_page
) {
1915 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
1916 "config_page(0x%p): free\n", ioc
->name
,
1918 pci_free_consistent(ioc
->pdev
, ioc
->config_page_sz
,
1919 ioc
->config_page
, ioc
->config_page_dma
);
1922 if (ioc
->scsi_lookup
) {
1923 free_pages((ulong
)ioc
->scsi_lookup
, ioc
->scsi_lookup_pages
);
1924 ioc
->scsi_lookup
= NULL
;
1926 kfree(ioc
->hpr_lookup
);
1927 kfree(ioc
->internal_lookup
);
1932 * _base_allocate_memory_pools - allocate start of day memory pools
1933 * @ioc: per adapter object
1934 * @sleep_flag: CAN_SLEEP or NO_SLEEP
1936 * Returns 0 success, anything else error
1939 _base_allocate_memory_pools(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
1941 Mpi2IOCFactsReply_t
*facts
;
1942 u32 queue_size
, queue_diff
;
1943 u16 max_sge_elements
;
1944 u16 num_of_reply_frames
;
1945 u16 chains_needed_per_io
;
1948 u16 max_request_credit
;
1950 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
1954 facts
= &ioc
->facts
;
1956 /* command line tunables for max sgl entries */
1957 if (max_sgl_entries
!= -1) {
1958 ioc
->shost
->sg_tablesize
= (max_sgl_entries
<
1959 MPT2SAS_SG_DEPTH
) ? max_sgl_entries
:
1962 ioc
->shost
->sg_tablesize
= MPT2SAS_SG_DEPTH
;
1965 /* command line tunables for max controller queue depth */
1966 if (max_queue_depth
!= -1) {
1967 max_request_credit
= (max_queue_depth
< facts
->RequestCredit
)
1968 ? max_queue_depth
: facts
->RequestCredit
;
1970 max_request_credit
= (facts
->RequestCredit
>
1971 MPT2SAS_MAX_REQUEST_QUEUE
) ? MPT2SAS_MAX_REQUEST_QUEUE
:
1972 facts
->RequestCredit
;
1975 ioc
->hba_queue_depth
= max_request_credit
;
1976 ioc
->hi_priority_depth
= facts
->HighPriorityCredit
;
1977 ioc
->internal_depth
= ioc
->hi_priority_depth
+ 5;
1979 /* request frame size */
1980 ioc
->request_sz
= facts
->IOCRequestFrameSize
* 4;
1982 /* reply frame size */
1983 ioc
->reply_sz
= facts
->ReplyFrameSize
* 4;
1987 /* calculate number of sg elements left over in the 1st frame */
1988 max_sge_elements
= ioc
->request_sz
- ((sizeof(Mpi2SCSIIORequest_t
) -
1989 sizeof(Mpi2SGEIOUnion_t
)) + ioc
->sge_size
);
1990 ioc
->max_sges_in_main_message
= max_sge_elements
/ioc
->sge_size
;
1992 /* now do the same for a chain buffer */
1993 max_sge_elements
= ioc
->request_sz
- ioc
->sge_size
;
1994 ioc
->max_sges_in_chain_message
= max_sge_elements
/ioc
->sge_size
;
1996 ioc
->chain_offset_value_for_main_message
=
1997 ((sizeof(Mpi2SCSIIORequest_t
) - sizeof(Mpi2SGEIOUnion_t
)) +
1998 (ioc
->max_sges_in_chain_message
* ioc
->sge_size
)) / 4;
2001 * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
2003 chains_needed_per_io
= ((ioc
->shost
->sg_tablesize
-
2004 ioc
->max_sges_in_main_message
)/ioc
->max_sges_in_chain_message
)
2006 if (chains_needed_per_io
> facts
->MaxChainDepth
) {
2007 chains_needed_per_io
= facts
->MaxChainDepth
;
2008 ioc
->shost
->sg_tablesize
= min_t(u16
,
2009 ioc
->max_sges_in_main_message
+ (ioc
->max_sges_in_chain_message
2010 * chains_needed_per_io
), ioc
->shost
->sg_tablesize
);
2012 ioc
->chains_needed_per_io
= chains_needed_per_io
;
2014 /* reply free queue sizing - taking into account for events */
2015 num_of_reply_frames
= ioc
->hba_queue_depth
+ 32;
2017 /* number of replies frames can't be a multiple of 16 */
2018 /* decrease number of reply frames by 1 */
2019 if (!(num_of_reply_frames
% 16))
2020 num_of_reply_frames
--;
2022 /* calculate number of reply free queue entries
2023 * (must be multiple of 16)
2026 /* (we know reply_free_queue_depth is not a multiple of 16) */
2027 queue_size
= num_of_reply_frames
;
2028 queue_size
+= 16 - (queue_size
% 16);
2029 ioc
->reply_free_queue_depth
= queue_size
;
2031 /* reply descriptor post queue sizing */
2032 /* this size should be the number of request frames + number of reply
2036 queue_size
= ioc
->hba_queue_depth
+ num_of_reply_frames
+ 1;
2037 /* round up to 16 byte boundary */
2038 if (queue_size
% 16)
2039 queue_size
+= 16 - (queue_size
% 16);
2041 /* check against IOC maximum reply post queue depth */
2042 if (queue_size
> facts
->MaxReplyDescriptorPostQueueDepth
) {
2043 queue_diff
= queue_size
-
2044 facts
->MaxReplyDescriptorPostQueueDepth
;
2046 /* round queue_diff up to multiple of 16 */
2047 if (queue_diff
% 16)
2048 queue_diff
+= 16 - (queue_diff
% 16);
2050 /* adjust hba_queue_depth, reply_free_queue_depth,
2053 ioc
->hba_queue_depth
-= queue_diff
;
2054 ioc
->reply_free_queue_depth
-= queue_diff
;
2055 queue_size
-= queue_diff
;
2057 ioc
->reply_post_queue_depth
= queue_size
;
2059 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scatter gather: "
2060 "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
2061 "chains_per_io(%d)\n", ioc
->name
, ioc
->max_sges_in_main_message
,
2062 ioc
->max_sges_in_chain_message
, ioc
->shost
->sg_tablesize
,
2063 ioc
->chains_needed_per_io
));
2065 ioc
->scsiio_depth
= ioc
->hba_queue_depth
-
2066 ioc
->hi_priority_depth
- ioc
->internal_depth
;
2068 /* set the scsi host can_queue depth
2069 * with some internal commands that could be outstanding
2071 ioc
->shost
->can_queue
= ioc
->scsiio_depth
- (2);
2072 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scsi host: "
2073 "can_queue depth (%d)\n", ioc
->name
, ioc
->shost
->can_queue
));
2075 /* contiguous pool for request and chains, 16 byte align, one extra "
2078 ioc
->chain_depth
= ioc
->chains_needed_per_io
* ioc
->scsiio_depth
;
2079 sz
= ((ioc
->scsiio_depth
+ 1 + ioc
->chain_depth
) * ioc
->request_sz
);
2081 /* hi-priority queue */
2082 sz
+= (ioc
->hi_priority_depth
* ioc
->request_sz
);
2084 /* internal queue */
2085 sz
+= (ioc
->internal_depth
* ioc
->request_sz
);
2087 ioc
->request_dma_sz
= sz
;
2088 ioc
->request
= pci_alloc_consistent(ioc
->pdev
, sz
, &ioc
->request_dma
);
2089 if (!ioc
->request
) {
2090 printk(MPT2SAS_ERR_FMT
"request pool: pci_alloc_consistent "
2091 "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2092 "total(%d kB)\n", ioc
->name
, ioc
->hba_queue_depth
,
2093 ioc
->chains_needed_per_io
, ioc
->request_sz
, sz
/1024);
2094 if (ioc
->scsiio_depth
< MPT2SAS_SAS_QUEUE_DEPTH
)
2097 ioc
->hba_queue_depth
= max_request_credit
- retry_sz
;
2098 goto retry_allocation
;
2102 printk(MPT2SAS_ERR_FMT
"request pool: pci_alloc_consistent "
2103 "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2104 "total(%d kb)\n", ioc
->name
, ioc
->hba_queue_depth
,
2105 ioc
->chains_needed_per_io
, ioc
->request_sz
, sz
/1024);
2108 /* hi-priority queue */
2109 ioc
->hi_priority
= ioc
->request
+ ((ioc
->scsiio_depth
+ 1) *
2111 ioc
->hi_priority_dma
= ioc
->request_dma
+ ((ioc
->scsiio_depth
+ 1) *
2114 /* internal queue */
2115 ioc
->internal
= ioc
->hi_priority
+ (ioc
->hi_priority_depth
*
2117 ioc
->internal_dma
= ioc
->hi_priority_dma
+ (ioc
->hi_priority_depth
*
2120 ioc
->chain
= ioc
->internal
+ (ioc
->internal_depth
*
2122 ioc
->chain_dma
= ioc
->internal_dma
+ (ioc
->internal_depth
*
2125 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request pool(0x%p): "
2126 "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
,
2127 ioc
->request
, ioc
->hba_queue_depth
, ioc
->request_sz
,
2128 (ioc
->hba_queue_depth
* ioc
->request_sz
)/1024));
2129 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"chain pool(0x%p): depth"
2130 "(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
, ioc
->chain
,
2131 ioc
->chain_depth
, ioc
->request_sz
, ((ioc
->chain_depth
*
2132 ioc
->request_sz
))/1024));
2133 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request pool: dma(0x%llx)\n",
2134 ioc
->name
, (unsigned long long) ioc
->request_dma
));
2137 sz
= ioc
->scsiio_depth
* sizeof(struct request_tracker
);
2138 ioc
->scsi_lookup_pages
= get_order(sz
);
2139 ioc
->scsi_lookup
= (struct request_tracker
*)__get_free_pages(
2140 GFP_KERNEL
, ioc
->scsi_lookup_pages
);
2141 if (!ioc
->scsi_lookup
) {
2142 printk(MPT2SAS_ERR_FMT
"scsi_lookup: get_free_pages failed, "
2143 "sz(%d)\n", ioc
->name
, (int)sz
);
2147 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scsiio(0x%p): "
2148 "depth(%d)\n", ioc
->name
, ioc
->request
,
2149 ioc
->scsiio_depth
));
2151 /* initialize hi-priority queue smid's */
2152 ioc
->hpr_lookup
= kcalloc(ioc
->hi_priority_depth
,
2153 sizeof(struct request_tracker
), GFP_KERNEL
);
2154 if (!ioc
->hpr_lookup
) {
2155 printk(MPT2SAS_ERR_FMT
"hpr_lookup: kcalloc failed\n",
2159 ioc
->hi_priority_smid
= ioc
->scsiio_depth
+ 1;
2160 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"hi_priority(0x%p): "
2161 "depth(%d), start smid(%d)\n", ioc
->name
, ioc
->hi_priority
,
2162 ioc
->hi_priority_depth
, ioc
->hi_priority_smid
));
2164 /* initialize internal queue smid's */
2165 ioc
->internal_lookup
= kcalloc(ioc
->internal_depth
,
2166 sizeof(struct request_tracker
), GFP_KERNEL
);
2167 if (!ioc
->internal_lookup
) {
2168 printk(MPT2SAS_ERR_FMT
"internal_lookup: kcalloc failed\n",
2172 ioc
->internal_smid
= ioc
->hi_priority_smid
+ ioc
->hi_priority_depth
;
2173 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"internal(0x%p): "
2174 "depth(%d), start smid(%d)\n", ioc
->name
, ioc
->internal
,
2175 ioc
->internal_depth
, ioc
->internal_smid
));
2177 /* sense buffers, 4 byte align */
2178 sz
= ioc
->scsiio_depth
* SCSI_SENSE_BUFFERSIZE
;
2179 ioc
->sense_dma_pool
= pci_pool_create("sense pool", ioc
->pdev
, sz
, 4,
2181 if (!ioc
->sense_dma_pool
) {
2182 printk(MPT2SAS_ERR_FMT
"sense pool: pci_pool_create failed\n",
2186 ioc
->sense
= pci_pool_alloc(ioc
->sense_dma_pool
, GFP_KERNEL
,
2189 printk(MPT2SAS_ERR_FMT
"sense pool: pci_pool_alloc failed\n",
2193 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
2194 "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
2195 "(%d kB)\n", ioc
->name
, ioc
->sense
, ioc
->scsiio_depth
,
2196 SCSI_SENSE_BUFFERSIZE
, sz
/1024));
2197 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"sense_dma(0x%llx)\n",
2198 ioc
->name
, (unsigned long long)ioc
->sense_dma
));
2201 /* reply pool, 4 byte align */
2202 sz
= ioc
->reply_free_queue_depth
* ioc
->reply_sz
;
2203 ioc
->reply_dma_pool
= pci_pool_create("reply pool", ioc
->pdev
, sz
, 4,
2205 if (!ioc
->reply_dma_pool
) {
2206 printk(MPT2SAS_ERR_FMT
"reply pool: pci_pool_create failed\n",
2210 ioc
->reply
= pci_pool_alloc(ioc
->reply_dma_pool
, GFP_KERNEL
,
2213 printk(MPT2SAS_ERR_FMT
"reply pool: pci_pool_alloc failed\n",
2217 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply pool(0x%p): depth"
2218 "(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
, ioc
->reply
,
2219 ioc
->reply_free_queue_depth
, ioc
->reply_sz
, sz
/1024));
2220 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_dma(0x%llx)\n",
2221 ioc
->name
, (unsigned long long)ioc
->reply_dma
));
2224 /* reply free queue, 16 byte align */
2225 sz
= ioc
->reply_free_queue_depth
* 4;
2226 ioc
->reply_free_dma_pool
= pci_pool_create("reply_free pool",
2227 ioc
->pdev
, sz
, 16, 0);
2228 if (!ioc
->reply_free_dma_pool
) {
2229 printk(MPT2SAS_ERR_FMT
"reply_free pool: pci_pool_create "
2230 "failed\n", ioc
->name
);
2233 ioc
->reply_free
= pci_pool_alloc(ioc
->reply_free_dma_pool
, GFP_KERNEL
,
2234 &ioc
->reply_free_dma
);
2235 if (!ioc
->reply_free
) {
2236 printk(MPT2SAS_ERR_FMT
"reply_free pool: pci_pool_alloc "
2237 "failed\n", ioc
->name
);
2240 memset(ioc
->reply_free
, 0, sz
);
2241 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free pool(0x%p): "
2242 "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc
->name
,
2243 ioc
->reply_free
, ioc
->reply_free_queue_depth
, 4, sz
/1024));
2244 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free_dma"
2245 "(0x%llx)\n", ioc
->name
, (unsigned long long)ioc
->reply_free_dma
));
2248 /* reply post queue, 16 byte align */
2249 sz
= ioc
->reply_post_queue_depth
* sizeof(Mpi2DefaultReplyDescriptor_t
);
2250 ioc
->reply_post_free_dma_pool
= pci_pool_create("reply_post_free pool",
2251 ioc
->pdev
, sz
, 16, 0);
2252 if (!ioc
->reply_post_free_dma_pool
) {
2253 printk(MPT2SAS_ERR_FMT
"reply_post_free pool: pci_pool_create "
2254 "failed\n", ioc
->name
);
2257 ioc
->reply_post_free
= pci_pool_alloc(ioc
->reply_post_free_dma_pool
,
2258 GFP_KERNEL
, &ioc
->reply_post_free_dma
);
2259 if (!ioc
->reply_post_free
) {
2260 printk(MPT2SAS_ERR_FMT
"reply_post_free pool: pci_pool_alloc "
2261 "failed\n", ioc
->name
);
2264 memset(ioc
->reply_post_free
, 0, sz
);
2265 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply post free pool"
2266 "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
2267 ioc
->name
, ioc
->reply_post_free
, ioc
->reply_post_queue_depth
, 8,
2269 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_post_free_dma = "
2270 "(0x%llx)\n", ioc
->name
, (unsigned long long)
2271 ioc
->reply_post_free_dma
));
2274 ioc
->config_page_sz
= 512;
2275 ioc
->config_page
= pci_alloc_consistent(ioc
->pdev
,
2276 ioc
->config_page_sz
, &ioc
->config_page_dma
);
2277 if (!ioc
->config_page
) {
2278 printk(MPT2SAS_ERR_FMT
"config page: pci_pool_alloc "
2279 "failed\n", ioc
->name
);
2282 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"config page(0x%p): size"
2283 "(%d)\n", ioc
->name
, ioc
->config_page
, ioc
->config_page_sz
));
2284 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"config_page_dma"
2285 "(0x%llx)\n", ioc
->name
, (unsigned long long)ioc
->config_page_dma
));
2286 total_sz
+= ioc
->config_page_sz
;
2288 printk(MPT2SAS_INFO_FMT
"Allocated physical memory: size(%d kB)\n",
2289 ioc
->name
, total_sz
/1024);
2290 printk(MPT2SAS_INFO_FMT
"Current Controller Queue Depth(%d), "
2291 "Max Controller Queue Depth(%d)\n",
2292 ioc
->name
, ioc
->shost
->can_queue
, facts
->RequestCredit
);
2293 printk(MPT2SAS_INFO_FMT
"Scatter Gather Elements per IO(%d)\n",
2294 ioc
->name
, ioc
->shost
->sg_tablesize
);
2298 _base_release_memory_pools(ioc
);
2304 * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
2305 * @ioc: Pointer to MPT_ADAPTER structure
2306 * @cooked: Request raw or cooked IOC state
2308 * Returns all IOC Doorbell register bits if cooked==0, else just the
2309 * Doorbell bits in MPI_IOC_STATE_MASK.
2312 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER
*ioc
, int cooked
)
2316 s
= readl(&ioc
->chip
->Doorbell
);
2317 sc
= s
& MPI2_IOC_STATE_MASK
;
2318 return cooked
? sc
: s
;
2322 * _base_wait_on_iocstate - waiting on a particular ioc state
2323 * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
2324 * @timeout: timeout in second
2325 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2327 * Returns 0 for success, non-zero for failure.
2330 _base_wait_on_iocstate(struct MPT2SAS_ADAPTER
*ioc
, u32 ioc_state
, int timeout
,
2337 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2339 current_state
= mpt2sas_base_get_iocstate(ioc
, 1);
2340 if (current_state
== ioc_state
)
2342 if (count
&& current_state
== MPI2_IOC_STATE_FAULT
)
2344 if (sleep_flag
== CAN_SLEEP
)
2351 return current_state
;
2355 * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
2356 * a write to the doorbell)
2357 * @ioc: per adapter object
2358 * @timeout: timeout in second
2359 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2361 * Returns 0 for success, non-zero for failure.
2363 * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
2366 _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2373 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2375 int_status
= readl(&ioc
->chip
->HostInterruptStatus
);
2376 if (int_status
& MPI2_HIS_IOC2SYS_DB_STATUS
) {
2377 dhsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: "
2378 "successfull count(%d), timeout(%d)\n", ioc
->name
,
2379 __func__
, count
, timeout
));
2382 if (sleep_flag
== CAN_SLEEP
)
2389 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2390 "int_status(%x)!\n", ioc
->name
, __func__
, count
, int_status
);
2395 * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
2396 * @ioc: per adapter object
2397 * @timeout: timeout in second
2398 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2400 * Returns 0 for success, non-zero for failure.
2402 * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
2406 _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2414 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2416 int_status
= readl(&ioc
->chip
->HostInterruptStatus
);
2417 if (!(int_status
& MPI2_HIS_SYS2IOC_DB_STATUS
)) {
2418 dhsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: "
2419 "successfull count(%d), timeout(%d)\n", ioc
->name
,
2420 __func__
, count
, timeout
));
2422 } else if (int_status
& MPI2_HIS_IOC2SYS_DB_STATUS
) {
2423 doorbell
= readl(&ioc
->chip
->Doorbell
);
2424 if ((doorbell
& MPI2_IOC_STATE_MASK
) ==
2425 MPI2_IOC_STATE_FAULT
) {
2426 mpt2sas_base_fault_info(ioc
, doorbell
);
2429 } else if (int_status
== 0xFFFFFFFF)
2432 if (sleep_flag
== CAN_SLEEP
)
2440 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2441 "int_status(%x)!\n", ioc
->name
, __func__
, count
, int_status
);
2446 * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
2447 * @ioc: per adapter object
2448 * @timeout: timeout in second
2449 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2451 * Returns 0 for success, non-zero for failure.
2455 _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2462 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2464 doorbell_reg
= readl(&ioc
->chip
->Doorbell
);
2465 if (!(doorbell_reg
& MPI2_DOORBELL_USED
)) {
2466 dhsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: "
2467 "successfull count(%d), timeout(%d)\n", ioc
->name
,
2468 __func__
, count
, timeout
));
2471 if (sleep_flag
== CAN_SLEEP
)
2478 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2479 "doorbell_reg(%x)!\n", ioc
->name
, __func__
, count
, doorbell_reg
);
2484 * _base_send_ioc_reset - send doorbell reset
2485 * @ioc: per adapter object
2486 * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
2487 * @timeout: timeout in second
2488 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2490 * Returns 0 for success, non-zero for failure.
2493 _base_send_ioc_reset(struct MPT2SAS_ADAPTER
*ioc
, u8 reset_type
, int timeout
,
2499 if (reset_type
!= MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
) {
2500 printk(MPT2SAS_ERR_FMT
"%s: unknown reset_type\n",
2501 ioc
->name
, __func__
);
2505 if (!(ioc
->facts
.IOCCapabilities
&
2506 MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY
))
2509 printk(MPT2SAS_INFO_FMT
"sending message unit reset !!\n", ioc
->name
);
2511 writel(reset_type
<< MPI2_DOORBELL_FUNCTION_SHIFT
,
2512 &ioc
->chip
->Doorbell
);
2513 if ((_base_wait_for_doorbell_ack(ioc
, 15, sleep_flag
))) {
2517 ioc_state
= _base_wait_on_iocstate(ioc
, MPI2_IOC_STATE_READY
,
2518 timeout
, sleep_flag
);
2520 printk(MPT2SAS_ERR_FMT
"%s: failed going to ready state "
2521 " (ioc_state=0x%x)\n", ioc
->name
, __func__
, ioc_state
);
2526 printk(MPT2SAS_INFO_FMT
"message unit reset: %s\n",
2527 ioc
->name
, ((r
== 0) ? "SUCCESS" : "FAILED"));
2532 * _base_handshake_req_reply_wait - send request thru doorbell interface
2533 * @ioc: per adapter object
2534 * @request_bytes: request length
2535 * @request: pointer having request payload
2536 * @reply_bytes: reply length
2537 * @reply: pointer to reply payload
2538 * @timeout: timeout in second
2539 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2541 * Returns 0 for success, non-zero for failure.
2544 _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER
*ioc
, int request_bytes
,
2545 u32
*request
, int reply_bytes
, u16
*reply
, int timeout
, int sleep_flag
)
2547 MPI2DefaultReply_t
*default_reply
= (MPI2DefaultReply_t
*)reply
;
2553 /* make sure doorbell is not in use */
2554 if ((readl(&ioc
->chip
->Doorbell
) & MPI2_DOORBELL_USED
)) {
2555 printk(MPT2SAS_ERR_FMT
"doorbell is in use "
2556 " (line=%d)\n", ioc
->name
, __LINE__
);
2560 /* clear pending doorbell interrupts from previous state changes */
2561 if (readl(&ioc
->chip
->HostInterruptStatus
) &
2562 MPI2_HIS_IOC2SYS_DB_STATUS
)
2563 writel(0, &ioc
->chip
->HostInterruptStatus
);
2565 /* send message to ioc */
2566 writel(((MPI2_FUNCTION_HANDSHAKE
<<MPI2_DOORBELL_FUNCTION_SHIFT
) |
2567 ((request_bytes
/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT
)),
2568 &ioc
->chip
->Doorbell
);
2570 if ((_base_wait_for_doorbell_int(ioc
, 5, NO_SLEEP
))) {
2571 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
2572 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
2575 writel(0, &ioc
->chip
->HostInterruptStatus
);
2577 if ((_base_wait_for_doorbell_ack(ioc
, 5, sleep_flag
))) {
2578 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
2579 "ack failed (line=%d)\n", ioc
->name
, __LINE__
);
2583 /* send message 32-bits at a time */
2584 for (i
= 0, failed
= 0; i
< request_bytes
/4 && !failed
; i
++) {
2585 writel(cpu_to_le32(request
[i
]), &ioc
->chip
->Doorbell
);
2586 if ((_base_wait_for_doorbell_ack(ioc
, 5, sleep_flag
)))
2591 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
2592 "sending request failed (line=%d)\n", ioc
->name
, __LINE__
);
2596 /* now wait for the reply */
2597 if ((_base_wait_for_doorbell_int(ioc
, timeout
, sleep_flag
))) {
2598 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
2599 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
2603 /* read the first two 16-bits, it gives the total length of the reply */
2604 reply
[0] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
2605 & MPI2_DOORBELL_DATA_MASK
);
2606 writel(0, &ioc
->chip
->HostInterruptStatus
);
2607 if ((_base_wait_for_doorbell_int(ioc
, 5, sleep_flag
))) {
2608 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
2609 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
2612 reply
[1] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
2613 & MPI2_DOORBELL_DATA_MASK
);
2614 writel(0, &ioc
->chip
->HostInterruptStatus
);
2616 for (i
= 2; i
< default_reply
->MsgLength
* 2; i
++) {
2617 if ((_base_wait_for_doorbell_int(ioc
, 5, sleep_flag
))) {
2618 printk(MPT2SAS_ERR_FMT
"doorbell "
2619 "handshake int failed (line=%d)\n", ioc
->name
,
2623 if (i
>= reply_bytes
/2) /* overflow case */
2624 dummy
= readl(&ioc
->chip
->Doorbell
);
2626 reply
[i
] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
2627 & MPI2_DOORBELL_DATA_MASK
);
2628 writel(0, &ioc
->chip
->HostInterruptStatus
);
2631 _base_wait_for_doorbell_int(ioc
, 5, sleep_flag
);
2632 if (_base_wait_for_doorbell_not_used(ioc
, 5, sleep_flag
) != 0) {
2633 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"doorbell is in use "
2634 " (line=%d)\n", ioc
->name
, __LINE__
));
2636 writel(0, &ioc
->chip
->HostInterruptStatus
);
2638 if (ioc
->logging_level
& MPT_DEBUG_INIT
) {
2640 printk(KERN_DEBUG
"\toffset:data\n");
2641 for (i
= 0; i
< reply_bytes
/4; i
++)
2642 printk(KERN_DEBUG
"\t[0x%02x]:%08x\n", i
*4,
2643 le32_to_cpu(mfp
[i
]));
2649 * mpt2sas_base_sas_iounit_control - send sas iounit control to FW
2650 * @ioc: per adapter object
2651 * @mpi_reply: the reply payload from FW
2652 * @mpi_request: the request payload sent to FW
2654 * The SAS IO Unit Control Request message allows the host to perform low-level
2655 * operations, such as resets on the PHYs of the IO Unit, also allows the host
2656 * to obtain the IOC assigned device handles for a device if it has other
2657 * identifying information about the device, in addition allows the host to
2658 * remove IOC resources associated with the device.
2660 * Returns 0 for success, non-zero for failure.
2663 mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER
*ioc
,
2664 Mpi2SasIoUnitControlReply_t
*mpi_reply
,
2665 Mpi2SasIoUnitControlRequest_t
*mpi_request
)
2669 unsigned long timeleft
;
2673 u16 wait_state_count
;
2675 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
2678 mutex_lock(&ioc
->base_cmds
.mutex
);
2680 if (ioc
->base_cmds
.status
!= MPT2_CMD_NOT_USED
) {
2681 printk(MPT2SAS_ERR_FMT
"%s: base_cmd in use\n",
2682 ioc
->name
, __func__
);
2687 wait_state_count
= 0;
2688 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
2689 while (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
2690 if (wait_state_count
++ == 10) {
2691 printk(MPT2SAS_ERR_FMT
2692 "%s: failed due to ioc not operational\n",
2693 ioc
->name
, __func__
);
2698 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
2699 printk(MPT2SAS_INFO_FMT
"%s: waiting for "
2700 "operational state(count=%d)\n", ioc
->name
,
2701 __func__
, wait_state_count
);
2704 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
2706 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
2707 ioc
->name
, __func__
);
2713 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
2714 request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
2715 ioc
->base_cmds
.smid
= smid
;
2716 memcpy(request
, mpi_request
, sizeof(Mpi2SasIoUnitControlRequest_t
));
2717 if (mpi_request
->Operation
== MPI2_SAS_OP_PHY_HARD_RESET
||
2718 mpi_request
->Operation
== MPI2_SAS_OP_PHY_LINK_RESET
)
2719 ioc
->ioc_link_reset_in_progress
= 1;
2720 mpt2sas_base_put_smid_default(ioc
, smid
);
2721 init_completion(&ioc
->base_cmds
.done
);
2722 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
,
2723 msecs_to_jiffies(10000));
2724 if ((mpi_request
->Operation
== MPI2_SAS_OP_PHY_HARD_RESET
||
2725 mpi_request
->Operation
== MPI2_SAS_OP_PHY_LINK_RESET
) &&
2726 ioc
->ioc_link_reset_in_progress
)
2727 ioc
->ioc_link_reset_in_progress
= 0;
2728 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
2729 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
2730 ioc
->name
, __func__
);
2731 _debug_dump_mf(mpi_request
,
2732 sizeof(Mpi2SasIoUnitControlRequest_t
)/4);
2733 if (!(ioc
->base_cmds
.status
& MPT2_CMD_RESET
))
2735 goto issue_host_reset
;
2737 if (ioc
->base_cmds
.status
& MPT2_CMD_REPLY_VALID
)
2738 memcpy(mpi_reply
, ioc
->base_cmds
.reply
,
2739 sizeof(Mpi2SasIoUnitControlReply_t
));
2741 memset(mpi_reply
, 0, sizeof(Mpi2SasIoUnitControlReply_t
));
2742 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
2747 mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
2749 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
2752 mutex_unlock(&ioc
->base_cmds
.mutex
);
2758 * mpt2sas_base_scsi_enclosure_processor - sending request to sep device
2759 * @ioc: per adapter object
2760 * @mpi_reply: the reply payload from FW
2761 * @mpi_request: the request payload sent to FW
2763 * The SCSI Enclosure Processor request message causes the IOC to
2764 * communicate with SES devices to control LED status signals.
2766 * Returns 0 for success, non-zero for failure.
2769 mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER
*ioc
,
2770 Mpi2SepReply_t
*mpi_reply
, Mpi2SepRequest_t
*mpi_request
)
2774 unsigned long timeleft
;
2778 u16 wait_state_count
;
2780 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
2783 mutex_lock(&ioc
->base_cmds
.mutex
);
2785 if (ioc
->base_cmds
.status
!= MPT2_CMD_NOT_USED
) {
2786 printk(MPT2SAS_ERR_FMT
"%s: base_cmd in use\n",
2787 ioc
->name
, __func__
);
2792 wait_state_count
= 0;
2793 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
2794 while (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
2795 if (wait_state_count
++ == 10) {
2796 printk(MPT2SAS_ERR_FMT
2797 "%s: failed due to ioc not operational\n",
2798 ioc
->name
, __func__
);
2803 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
2804 printk(MPT2SAS_INFO_FMT
"%s: waiting for "
2805 "operational state(count=%d)\n", ioc
->name
,
2806 __func__
, wait_state_count
);
2809 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
2811 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
2812 ioc
->name
, __func__
);
2818 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
2819 request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
2820 ioc
->base_cmds
.smid
= smid
;
2821 memcpy(request
, mpi_request
, sizeof(Mpi2SepReply_t
));
2822 mpt2sas_base_put_smid_default(ioc
, smid
);
2823 init_completion(&ioc
->base_cmds
.done
);
2824 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
,
2825 msecs_to_jiffies(10000));
2826 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
2827 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
2828 ioc
->name
, __func__
);
2829 _debug_dump_mf(mpi_request
,
2830 sizeof(Mpi2SepRequest_t
)/4);
2831 if (!(ioc
->base_cmds
.status
& MPT2_CMD_RESET
))
2833 goto issue_host_reset
;
2835 if (ioc
->base_cmds
.status
& MPT2_CMD_REPLY_VALID
)
2836 memcpy(mpi_reply
, ioc
->base_cmds
.reply
,
2837 sizeof(Mpi2SepReply_t
));
2839 memset(mpi_reply
, 0, sizeof(Mpi2SepReply_t
));
2840 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
2845 mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
2847 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
2850 mutex_unlock(&ioc
->base_cmds
.mutex
);
2855 * _base_get_port_facts - obtain port facts reply and save in ioc
2856 * @ioc: per adapter object
2857 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2859 * Returns 0 for success, non-zero for failure.
2862 _base_get_port_facts(struct MPT2SAS_ADAPTER
*ioc
, int port
, int sleep_flag
)
2864 Mpi2PortFactsRequest_t mpi_request
;
2865 Mpi2PortFactsReply_t mpi_reply
, *pfacts
;
2866 int mpi_reply_sz
, mpi_request_sz
, r
;
2868 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
2871 mpi_reply_sz
= sizeof(Mpi2PortFactsReply_t
);
2872 mpi_request_sz
= sizeof(Mpi2PortFactsRequest_t
);
2873 memset(&mpi_request
, 0, mpi_request_sz
);
2874 mpi_request
.Function
= MPI2_FUNCTION_PORT_FACTS
;
2875 mpi_request
.PortNumber
= port
;
2876 r
= _base_handshake_req_reply_wait(ioc
, mpi_request_sz
,
2877 (u32
*)&mpi_request
, mpi_reply_sz
, (u16
*)&mpi_reply
, 5, CAN_SLEEP
);
2880 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
2881 ioc
->name
, __func__
, r
);
2885 pfacts
= &ioc
->pfacts
[port
];
2886 memset(pfacts
, 0, sizeof(Mpi2PortFactsReply_t
));
2887 pfacts
->PortNumber
= mpi_reply
.PortNumber
;
2888 pfacts
->VP_ID
= mpi_reply
.VP_ID
;
2889 pfacts
->VF_ID
= mpi_reply
.VF_ID
;
2890 pfacts
->MaxPostedCmdBuffers
=
2891 le16_to_cpu(mpi_reply
.MaxPostedCmdBuffers
);
2897 * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
2898 * @ioc: per adapter object
2899 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2901 * Returns 0 for success, non-zero for failure.
2904 _base_get_ioc_facts(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
2906 Mpi2IOCFactsRequest_t mpi_request
;
2907 Mpi2IOCFactsReply_t mpi_reply
, *facts
;
2908 int mpi_reply_sz
, mpi_request_sz
, r
;
2910 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
2913 mpi_reply_sz
= sizeof(Mpi2IOCFactsReply_t
);
2914 mpi_request_sz
= sizeof(Mpi2IOCFactsRequest_t
);
2915 memset(&mpi_request
, 0, mpi_request_sz
);
2916 mpi_request
.Function
= MPI2_FUNCTION_IOC_FACTS
;
2917 r
= _base_handshake_req_reply_wait(ioc
, mpi_request_sz
,
2918 (u32
*)&mpi_request
, mpi_reply_sz
, (u16
*)&mpi_reply
, 5, CAN_SLEEP
);
2921 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
2922 ioc
->name
, __func__
, r
);
2926 facts
= &ioc
->facts
;
2927 memset(facts
, 0, sizeof(Mpi2IOCFactsReply_t
));
2928 facts
->MsgVersion
= le16_to_cpu(mpi_reply
.MsgVersion
);
2929 facts
->HeaderVersion
= le16_to_cpu(mpi_reply
.HeaderVersion
);
2930 facts
->VP_ID
= mpi_reply
.VP_ID
;
2931 facts
->VF_ID
= mpi_reply
.VF_ID
;
2932 facts
->IOCExceptions
= le16_to_cpu(mpi_reply
.IOCExceptions
);
2933 facts
->MaxChainDepth
= mpi_reply
.MaxChainDepth
;
2934 facts
->WhoInit
= mpi_reply
.WhoInit
;
2935 facts
->NumberOfPorts
= mpi_reply
.NumberOfPorts
;
2936 facts
->RequestCredit
= le16_to_cpu(mpi_reply
.RequestCredit
);
2937 facts
->MaxReplyDescriptorPostQueueDepth
=
2938 le16_to_cpu(mpi_reply
.MaxReplyDescriptorPostQueueDepth
);
2939 facts
->ProductID
= le16_to_cpu(mpi_reply
.ProductID
);
2940 facts
->IOCCapabilities
= le32_to_cpu(mpi_reply
.IOCCapabilities
);
2941 if ((facts
->IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID
))
2942 ioc
->ir_firmware
= 1;
2943 facts
->FWVersion
.Word
= le32_to_cpu(mpi_reply
.FWVersion
.Word
);
2944 facts
->IOCRequestFrameSize
=
2945 le16_to_cpu(mpi_reply
.IOCRequestFrameSize
);
2946 facts
->MaxInitiators
= le16_to_cpu(mpi_reply
.MaxInitiators
);
2947 facts
->MaxTargets
= le16_to_cpu(mpi_reply
.MaxTargets
);
2948 ioc
->shost
->max_id
= -1;
2949 facts
->MaxSasExpanders
= le16_to_cpu(mpi_reply
.MaxSasExpanders
);
2950 facts
->MaxEnclosures
= le16_to_cpu(mpi_reply
.MaxEnclosures
);
2951 facts
->ProtocolFlags
= le16_to_cpu(mpi_reply
.ProtocolFlags
);
2952 facts
->HighPriorityCredit
=
2953 le16_to_cpu(mpi_reply
.HighPriorityCredit
);
2954 facts
->ReplyFrameSize
= mpi_reply
.ReplyFrameSize
;
2955 facts
->MaxDevHandle
= le16_to_cpu(mpi_reply
.MaxDevHandle
);
2957 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"hba queue depth(%d), "
2958 "max chains per io(%d)\n", ioc
->name
, facts
->RequestCredit
,
2959 facts
->MaxChainDepth
));
2960 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request frame size(%d), "
2961 "reply frame size(%d)\n", ioc
->name
,
2962 facts
->IOCRequestFrameSize
* 4, facts
->ReplyFrameSize
* 4));
2967 * _base_send_ioc_init - send ioc_init to firmware
2968 * @ioc: per adapter object
2969 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2971 * Returns 0 for success, non-zero for failure.
2974 _base_send_ioc_init(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
2976 Mpi2IOCInitRequest_t mpi_request
;
2977 Mpi2IOCInitReply_t mpi_reply
;
2979 struct timeval current_time
;
2982 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
2985 memset(&mpi_request
, 0, sizeof(Mpi2IOCInitRequest_t
));
2986 mpi_request
.Function
= MPI2_FUNCTION_IOC_INIT
;
2987 mpi_request
.WhoInit
= MPI2_WHOINIT_HOST_DRIVER
;
2988 mpi_request
.VF_ID
= 0; /* TODO */
2989 mpi_request
.VP_ID
= 0;
2990 mpi_request
.MsgVersion
= cpu_to_le16(MPI2_VERSION
);
2991 mpi_request
.HeaderVersion
= cpu_to_le16(MPI2_HEADER_VERSION
);
2993 /* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was
2994 * removed and made reserved. For those with older firmware will need
2995 * this fix. It was decided that the Reply and Request frame sizes are
2998 if ((ioc
->facts
.HeaderVersion
>> 8) < 0xA) {
2999 mpi_request
.Reserved7
= cpu_to_le16(ioc
->reply_sz
);
3000 /* mpi_request.SystemReplyFrameSize =
3001 * cpu_to_le16(ioc->reply_sz);
3005 mpi_request
.SystemRequestFrameSize
= cpu_to_le16(ioc
->request_sz
/4);
3006 mpi_request
.ReplyDescriptorPostQueueDepth
=
3007 cpu_to_le16(ioc
->reply_post_queue_depth
);
3008 mpi_request
.ReplyFreeQueueDepth
=
3009 cpu_to_le16(ioc
->reply_free_queue_depth
);
3011 #if BITS_PER_LONG > 32
3012 mpi_request
.SenseBufferAddressHigh
=
3013 cpu_to_le32(ioc
->sense_dma
>> 32);
3014 mpi_request
.SystemReplyAddressHigh
=
3015 cpu_to_le32(ioc
->reply_dma
>> 32);
3016 mpi_request
.SystemRequestFrameBaseAddress
=
3017 cpu_to_le64(ioc
->request_dma
);
3018 mpi_request
.ReplyFreeQueueAddress
=
3019 cpu_to_le64(ioc
->reply_free_dma
);
3020 mpi_request
.ReplyDescriptorPostQueueAddress
=
3021 cpu_to_le64(ioc
->reply_post_free_dma
);
3023 mpi_request
.SystemRequestFrameBaseAddress
=
3024 cpu_to_le32(ioc
->request_dma
);
3025 mpi_request
.ReplyFreeQueueAddress
=
3026 cpu_to_le32(ioc
->reply_free_dma
);
3027 mpi_request
.ReplyDescriptorPostQueueAddress
=
3028 cpu_to_le32(ioc
->reply_post_free_dma
);
3031 /* This time stamp specifies number of milliseconds
3032 * since epoch ~ midnight January 1, 1970.
3034 do_gettimeofday(¤t_time
);
3035 mpi_request
.TimeStamp
= cpu_to_le64((u64
)current_time
.tv_sec
* 1000 +
3036 (current_time
.tv_usec
/ 1000));
3038 if (ioc
->logging_level
& MPT_DEBUG_INIT
) {
3042 mfp
= (u32
*)&mpi_request
;
3043 printk(KERN_DEBUG
"\toffset:data\n");
3044 for (i
= 0; i
< sizeof(Mpi2IOCInitRequest_t
)/4; i
++)
3045 printk(KERN_DEBUG
"\t[0x%02x]:%08x\n", i
*4,
3046 le32_to_cpu(mfp
[i
]));
3049 r
= _base_handshake_req_reply_wait(ioc
,
3050 sizeof(Mpi2IOCInitRequest_t
), (u32
*)&mpi_request
,
3051 sizeof(Mpi2IOCInitReply_t
), (u16
*)&mpi_reply
, 10,
3055 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
3056 ioc
->name
, __func__
, r
);
3060 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) & MPI2_IOCSTATUS_MASK
;
3061 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
||
3062 mpi_reply
.IOCLogInfo
) {
3063 printk(MPT2SAS_ERR_FMT
"%s: failed\n", ioc
->name
, __func__
);
3071 * _base_send_port_enable - send port_enable(discovery stuff) to firmware
3072 * @ioc: per adapter object
3073 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3075 * Returns 0 for success, non-zero for failure.
3078 _base_send_port_enable(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3080 Mpi2PortEnableRequest_t
*mpi_request
;
3082 unsigned long timeleft
;
3086 printk(MPT2SAS_INFO_FMT
"sending port enable !!\n", ioc
->name
);
3088 if (ioc
->base_cmds
.status
& MPT2_CMD_PENDING
) {
3089 printk(MPT2SAS_ERR_FMT
"%s: internal command already in use\n",
3090 ioc
->name
, __func__
);
3094 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
3096 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3097 ioc
->name
, __func__
);
3101 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
3102 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3103 ioc
->base_cmds
.smid
= smid
;
3104 memset(mpi_request
, 0, sizeof(Mpi2PortEnableRequest_t
));
3105 mpi_request
->Function
= MPI2_FUNCTION_PORT_ENABLE
;
3106 mpi_request
->VF_ID
= 0; /* TODO */
3107 mpi_request
->VP_ID
= 0;
3109 mpt2sas_base_put_smid_default(ioc
, smid
);
3110 init_completion(&ioc
->base_cmds
.done
);
3111 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
,
3113 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3114 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3115 ioc
->name
, __func__
);
3116 _debug_dump_mf(mpi_request
,
3117 sizeof(Mpi2PortEnableRequest_t
)/4);
3118 if (ioc
->base_cmds
.status
& MPT2_CMD_RESET
)
3124 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: complete\n",
3125 ioc
->name
, __func__
));
3127 ioc_state
= _base_wait_on_iocstate(ioc
, MPI2_IOC_STATE_OPERATIONAL
,
3130 printk(MPT2SAS_ERR_FMT
"%s: failed going to operational state "
3131 " (ioc_state=0x%x)\n", ioc
->name
, __func__
, ioc_state
);
3135 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3136 printk(MPT2SAS_INFO_FMT
"port enable: %s\n",
3137 ioc
->name
, ((r
== 0) ? "SUCCESS" : "FAILED"));
3142 * _base_unmask_events - turn on notification for this event
3143 * @ioc: per adapter object
3144 * @event: firmware event
3146 * The mask is stored in ioc->event_masks.
3149 _base_unmask_events(struct MPT2SAS_ADAPTER
*ioc
, u16 event
)
3156 desired_event
= (1 << (event
% 32));
3159 ioc
->event_masks
[0] &= ~desired_event
;
3160 else if (event
< 64)
3161 ioc
->event_masks
[1] &= ~desired_event
;
3162 else if (event
< 96)
3163 ioc
->event_masks
[2] &= ~desired_event
;
3164 else if (event
< 128)
3165 ioc
->event_masks
[3] &= ~desired_event
;
3169 * _base_event_notification - send event notification
3170 * @ioc: per adapter object
3171 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3173 * Returns 0 for success, non-zero for failure.
3176 _base_event_notification(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3178 Mpi2EventNotificationRequest_t
*mpi_request
;
3179 unsigned long timeleft
;
3184 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
3187 if (ioc
->base_cmds
.status
& MPT2_CMD_PENDING
) {
3188 printk(MPT2SAS_ERR_FMT
"%s: internal command already in use\n",
3189 ioc
->name
, __func__
);
3193 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
3195 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3196 ioc
->name
, __func__
);
3199 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
3200 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3201 ioc
->base_cmds
.smid
= smid
;
3202 memset(mpi_request
, 0, sizeof(Mpi2EventNotificationRequest_t
));
3203 mpi_request
->Function
= MPI2_FUNCTION_EVENT_NOTIFICATION
;
3204 mpi_request
->VF_ID
= 0; /* TODO */
3205 mpi_request
->VP_ID
= 0;
3206 for (i
= 0; i
< MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++)
3207 mpi_request
->EventMasks
[i
] =
3208 cpu_to_le32(ioc
->event_masks
[i
]);
3209 mpt2sas_base_put_smid_default(ioc
, smid
);
3210 init_completion(&ioc
->base_cmds
.done
);
3211 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
, 30*HZ
);
3212 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3213 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3214 ioc
->name
, __func__
);
3215 _debug_dump_mf(mpi_request
,
3216 sizeof(Mpi2EventNotificationRequest_t
)/4);
3217 if (ioc
->base_cmds
.status
& MPT2_CMD_RESET
)
3222 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: complete\n",
3223 ioc
->name
, __func__
));
3224 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3229 * mpt2sas_base_validate_event_type - validating event types
3230 * @ioc: per adapter object
3231 * @event: firmware event
3233 * This will turn on firmware event notification when application
3234 * ask for that event. We don't mask events that are already enabled.
3237 mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER
*ioc
, u32
*event_type
)
3240 u32 event_mask
, desired_event
;
3241 u8 send_update_to_fw
;
3243 for (i
= 0, send_update_to_fw
= 0; i
<
3244 MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++) {
3245 event_mask
= ~event_type
[i
];
3247 for (j
= 0; j
< 32; j
++) {
3248 if (!(event_mask
& desired_event
) &&
3249 (ioc
->event_masks
[i
] & desired_event
)) {
3250 ioc
->event_masks
[i
] &= ~desired_event
;
3251 send_update_to_fw
= 1;
3253 desired_event
= (desired_event
<< 1);
3257 if (!send_update_to_fw
)
3260 mutex_lock(&ioc
->base_cmds
.mutex
);
3261 _base_event_notification(ioc
, CAN_SLEEP
);
3262 mutex_unlock(&ioc
->base_cmds
.mutex
);
3266 * _base_diag_reset - the "big hammer" start of day reset
3267 * @ioc: per adapter object
3268 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3270 * Returns 0 for success, non-zero for failure.
3273 _base_diag_reset(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3275 u32 host_diagnostic
;
3280 printk(MPT2SAS_INFO_FMT
"sending diag reset !!\n", ioc
->name
);
3282 _base_save_msix_table(ioc
);
3284 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"clear interrupts\n",
3289 /* Write magic sequence to WriteSequence register
3290 * Loop until in diagnostic mode
3292 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"write magic "
3293 "sequence\n", ioc
->name
));
3294 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3295 writel(MPI2_WRSEQ_1ST_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3296 writel(MPI2_WRSEQ_2ND_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3297 writel(MPI2_WRSEQ_3RD_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3298 writel(MPI2_WRSEQ_4TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3299 writel(MPI2_WRSEQ_5TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3300 writel(MPI2_WRSEQ_6TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3303 if (sleep_flag
== CAN_SLEEP
)
3311 host_diagnostic
= readl(&ioc
->chip
->HostDiagnostic
);
3312 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"wrote magic "
3313 "sequence: count(%d), host_diagnostic(0x%08x)\n",
3314 ioc
->name
, count
, host_diagnostic
));
3316 } while ((host_diagnostic
& MPI2_DIAG_DIAG_WRITE_ENABLE
) == 0);
3318 hcb_size
= readl(&ioc
->chip
->HCBSize
);
3320 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"diag reset: issued\n",
3322 writel(host_diagnostic
| MPI2_DIAG_RESET_ADAPTER
,
3323 &ioc
->chip
->HostDiagnostic
);
3325 /* don't access any registers for 50 milliseconds */
3328 /* 300 second max wait */
3329 for (count
= 0; count
< 3000000 ; count
++) {
3331 host_diagnostic
= readl(&ioc
->chip
->HostDiagnostic
);
3333 if (host_diagnostic
== 0xFFFFFFFF)
3335 if (!(host_diagnostic
& MPI2_DIAG_RESET_ADAPTER
))
3339 if (sleep_flag
== CAN_SLEEP
)
3345 if (host_diagnostic
& MPI2_DIAG_HCB_MODE
) {
3347 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"restart the adapter "
3348 "assuming the HCB Address points to good F/W\n",
3350 host_diagnostic
&= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK
;
3351 host_diagnostic
|= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW
;
3352 writel(host_diagnostic
, &ioc
->chip
->HostDiagnostic
);
3354 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
3355 "re-enable the HCDW\n", ioc
->name
));
3356 writel(hcb_size
| MPI2_HCB_SIZE_HCB_ENABLE
,
3357 &ioc
->chip
->HCBSize
);
3360 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"restart the adapter\n",
3362 writel(host_diagnostic
& ~MPI2_DIAG_HOLD_IOC_RESET
,
3363 &ioc
->chip
->HostDiagnostic
);
3365 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"disable writes to the "
3366 "diagnostic register\n", ioc
->name
));
3367 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3369 drsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"Wait for FW to go to the "
3370 "READY state\n", ioc
->name
));
3371 ioc_state
= _base_wait_on_iocstate(ioc
, MPI2_IOC_STATE_READY
, 20,
3374 printk(MPT2SAS_ERR_FMT
"%s: failed going to ready state "
3375 " (ioc_state=0x%x)\n", ioc
->name
, __func__
, ioc_state
);
3379 _base_restore_msix_table(ioc
);
3380 printk(MPT2SAS_INFO_FMT
"diag reset: SUCCESS\n", ioc
->name
);
3384 printk(MPT2SAS_ERR_FMT
"diag reset: FAILED\n", ioc
->name
);
3389 * _base_make_ioc_ready - put controller in READY state
3390 * @ioc: per adapter object
3391 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3392 * @type: FORCE_BIG_HAMMER or SOFT_RESET
3394 * Returns 0 for success, non-zero for failure.
3397 _base_make_ioc_ready(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
,
3398 enum reset_type type
)
3402 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
3405 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 0);
3406 dhsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: ioc_state(0x%08x)\n",
3407 ioc
->name
, __func__
, ioc_state
));
3409 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_READY
)
3412 if (ioc_state
& MPI2_DOORBELL_USED
) {
3413 dhsprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"unexpected doorbell "
3414 "active!\n", ioc
->name
));
3415 goto issue_diag_reset
;
3418 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
) {
3419 mpt2sas_base_fault_info(ioc
, ioc_state
&
3420 MPI2_DOORBELL_DATA_MASK
);
3421 goto issue_diag_reset
;
3424 if (type
== FORCE_BIG_HAMMER
)
3425 goto issue_diag_reset
;
3427 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_OPERATIONAL
)
3428 if (!(_base_send_ioc_reset(ioc
,
3429 MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
, 15, CAN_SLEEP
)))
3433 return _base_diag_reset(ioc
, CAN_SLEEP
);
3437 * _base_make_ioc_operational - put controller in OPERATIONAL state
3438 * @ioc: per adapter object
3439 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3441 * Returns 0 for success, non-zero for failure.
3444 _base_make_ioc_operational(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3447 unsigned long flags
;
3450 struct _tr_list
*delayed_tr
, *delayed_tr_next
;
3452 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
3455 /* clean the delayed target reset list */
3456 list_for_each_entry_safe(delayed_tr
, delayed_tr_next
,
3457 &ioc
->delayed_tr_list
, list
) {
3458 list_del(&delayed_tr
->list
);
3462 /* initialize the scsi lookup free list */
3463 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
3464 INIT_LIST_HEAD(&ioc
->free_list
);
3466 for (i
= 0; i
< ioc
->scsiio_depth
; i
++, smid
++) {
3467 ioc
->scsi_lookup
[i
].cb_idx
= 0xFF;
3468 ioc
->scsi_lookup
[i
].smid
= smid
;
3469 ioc
->scsi_lookup
[i
].scmd
= NULL
;
3470 list_add_tail(&ioc
->scsi_lookup
[i
].tracker_list
,
3474 /* hi-priority queue */
3475 INIT_LIST_HEAD(&ioc
->hpr_free_list
);
3476 smid
= ioc
->hi_priority_smid
;
3477 for (i
= 0; i
< ioc
->hi_priority_depth
; i
++, smid
++) {
3478 ioc
->hpr_lookup
[i
].cb_idx
= 0xFF;
3479 ioc
->hpr_lookup
[i
].smid
= smid
;
3480 list_add_tail(&ioc
->hpr_lookup
[i
].tracker_list
,
3481 &ioc
->hpr_free_list
);
3484 /* internal queue */
3485 INIT_LIST_HEAD(&ioc
->internal_free_list
);
3486 smid
= ioc
->internal_smid
;
3487 for (i
= 0; i
< ioc
->internal_depth
; i
++, smid
++) {
3488 ioc
->internal_lookup
[i
].cb_idx
= 0xFF;
3489 ioc
->internal_lookup
[i
].smid
= smid
;
3490 list_add_tail(&ioc
->internal_lookup
[i
].tracker_list
,
3491 &ioc
->internal_free_list
);
3493 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
3495 /* initialize Reply Free Queue */
3496 for (i
= 0, reply_address
= (u32
)ioc
->reply_dma
;
3497 i
< ioc
->reply_free_queue_depth
; i
++, reply_address
+=
3499 ioc
->reply_free
[i
] = cpu_to_le32(reply_address
);
3501 /* initialize Reply Post Free Queue */
3502 for (i
= 0; i
< ioc
->reply_post_queue_depth
; i
++)
3503 ioc
->reply_post_free
[i
].Words
= ULLONG_MAX
;
3505 r
= _base_send_ioc_init(ioc
, sleep_flag
);
3509 /* initialize the index's */
3510 ioc
->reply_free_host_index
= ioc
->reply_free_queue_depth
- 1;
3511 ioc
->reply_post_host_index
= 0;
3512 writel(ioc
->reply_free_host_index
, &ioc
->chip
->ReplyFreeHostIndex
);
3513 writel(0, &ioc
->chip
->ReplyPostHostIndex
);
3515 _base_unmask_interrupts(ioc
);
3516 r
= _base_event_notification(ioc
, sleep_flag
);
3520 if (sleep_flag
== CAN_SLEEP
)
3521 _base_static_config_pages(ioc
);
3523 r
= _base_send_port_enable(ioc
, sleep_flag
);
3531 * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap)
3532 * @ioc: per adapter object
3537 mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER
*ioc
)
3539 struct pci_dev
*pdev
= ioc
->pdev
;
3541 dexitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
3544 _base_mask_interrupts(ioc
);
3545 ioc
->shost_recovery
= 1;
3546 _base_make_ioc_ready(ioc
, CAN_SLEEP
, SOFT_RESET
);
3547 ioc
->shost_recovery
= 0;
3549 synchronize_irq(pdev
->irq
);
3550 free_irq(ioc
->pci_irq
, ioc
);
3552 _base_disable_msix(ioc
);
3557 pci_release_selected_regions(ioc
->pdev
, ioc
->bars
);
3558 pci_disable_pcie_error_reporting(pdev
);
3559 pci_disable_device(pdev
);
3564 * mpt2sas_base_attach - attach controller instance
3565 * @ioc: per adapter object
3567 * Returns 0 for success, non-zero for failure.
3570 mpt2sas_base_attach(struct MPT2SAS_ADAPTER
*ioc
)
3574 dinitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
3577 r
= mpt2sas_base_map_resources(ioc
);
3581 pci_set_drvdata(ioc
->pdev
, ioc
->shost
);
3582 r
= _base_get_ioc_facts(ioc
, CAN_SLEEP
);
3584 goto out_free_resources
;
3586 r
= _base_make_ioc_ready(ioc
, CAN_SLEEP
, SOFT_RESET
);
3588 goto out_free_resources
;
3590 ioc
->pfacts
= kcalloc(ioc
->facts
.NumberOfPorts
,
3591 sizeof(Mpi2PortFactsReply_t
), GFP_KERNEL
);
3594 goto out_free_resources
;
3597 for (i
= 0 ; i
< ioc
->facts
.NumberOfPorts
; i
++) {
3598 r
= _base_get_port_facts(ioc
, i
, CAN_SLEEP
);
3600 goto out_free_resources
;
3603 r
= _base_allocate_memory_pools(ioc
, CAN_SLEEP
);
3605 goto out_free_resources
;
3607 init_waitqueue_head(&ioc
->reset_wq
);
3609 ioc
->fwfault_debug
= mpt2sas_fwfault_debug
;
3611 /* base internal command bits */
3612 mutex_init(&ioc
->base_cmds
.mutex
);
3613 ioc
->base_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
3614 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3616 /* transport internal command bits */
3617 ioc
->transport_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
3618 ioc
->transport_cmds
.status
= MPT2_CMD_NOT_USED
;
3619 mutex_init(&ioc
->transport_cmds
.mutex
);
3621 /* scsih internal command bits */
3622 ioc
->scsih_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
3623 ioc
->scsih_cmds
.status
= MPT2_CMD_NOT_USED
;
3624 mutex_init(&ioc
->scsih_cmds
.mutex
);
3626 /* task management internal command bits */
3627 ioc
->tm_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
3628 ioc
->tm_cmds
.status
= MPT2_CMD_NOT_USED
;
3629 mutex_init(&ioc
->tm_cmds
.mutex
);
3631 /* config page internal command bits */
3632 ioc
->config_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
3633 ioc
->config_cmds
.status
= MPT2_CMD_NOT_USED
;
3634 mutex_init(&ioc
->config_cmds
.mutex
);
3636 /* ctl module internal command bits */
3637 ioc
->ctl_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
3638 ioc
->ctl_cmds
.status
= MPT2_CMD_NOT_USED
;
3639 mutex_init(&ioc
->ctl_cmds
.mutex
);
3641 if (!ioc
->base_cmds
.reply
|| !ioc
->transport_cmds
.reply
||
3642 !ioc
->scsih_cmds
.reply
|| !ioc
->tm_cmds
.reply
||
3643 !ioc
->config_cmds
.reply
|| !ioc
->ctl_cmds
.reply
) {
3645 goto out_free_resources
;
3648 init_completion(&ioc
->shost_recovery_done
);
3650 for (i
= 0; i
< MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++)
3651 ioc
->event_masks
[i
] = -1;
3653 /* here we enable the events we care about */
3654 _base_unmask_events(ioc
, MPI2_EVENT_SAS_DISCOVERY
);
3655 _base_unmask_events(ioc
, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE
);
3656 _base_unmask_events(ioc
, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
);
3657 _base_unmask_events(ioc
, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
);
3658 _base_unmask_events(ioc
, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
);
3659 _base_unmask_events(ioc
, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST
);
3660 _base_unmask_events(ioc
, MPI2_EVENT_IR_VOLUME
);
3661 _base_unmask_events(ioc
, MPI2_EVENT_IR_PHYSICAL_DISK
);
3662 _base_unmask_events(ioc
, MPI2_EVENT_IR_OPERATION_STATUS
);
3663 _base_unmask_events(ioc
, MPI2_EVENT_TASK_SET_FULL
);
3664 _base_unmask_events(ioc
, MPI2_EVENT_LOG_ENTRY_ADDED
);
3665 r
= _base_make_ioc_operational(ioc
, CAN_SLEEP
);
3667 goto out_free_resources
;
3669 mpt2sas_base_start_watchdog(ioc
);
3670 if (diag_buffer_enable
!= 0)
3671 mpt2sas_enable_diag_buffer(ioc
, diag_buffer_enable
);
3676 ioc
->remove_host
= 1;
3677 mpt2sas_base_free_resources(ioc
);
3678 _base_release_memory_pools(ioc
);
3679 pci_set_drvdata(ioc
->pdev
, NULL
);
3680 kfree(ioc
->tm_cmds
.reply
);
3681 kfree(ioc
->transport_cmds
.reply
);
3682 kfree(ioc
->scsih_cmds
.reply
);
3683 kfree(ioc
->config_cmds
.reply
);
3684 kfree(ioc
->base_cmds
.reply
);
3685 kfree(ioc
->ctl_cmds
.reply
);
3687 ioc
->ctl_cmds
.reply
= NULL
;
3688 ioc
->base_cmds
.reply
= NULL
;
3689 ioc
->tm_cmds
.reply
= NULL
;
3690 ioc
->scsih_cmds
.reply
= NULL
;
3691 ioc
->transport_cmds
.reply
= NULL
;
3692 ioc
->config_cmds
.reply
= NULL
;
3699 * mpt2sas_base_detach - remove controller instance
3700 * @ioc: per adapter object
3705 mpt2sas_base_detach(struct MPT2SAS_ADAPTER
*ioc
)
3708 dexitprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s\n", ioc
->name
,
3711 mpt2sas_base_stop_watchdog(ioc
);
3712 mpt2sas_base_free_resources(ioc
);
3713 _base_release_memory_pools(ioc
);
3714 pci_set_drvdata(ioc
->pdev
, NULL
);
3716 kfree(ioc
->ctl_cmds
.reply
);
3717 kfree(ioc
->base_cmds
.reply
);
3718 kfree(ioc
->tm_cmds
.reply
);
3719 kfree(ioc
->transport_cmds
.reply
);
3720 kfree(ioc
->scsih_cmds
.reply
);
3721 kfree(ioc
->config_cmds
.reply
);
3725 * _base_reset_handler - reset callback handler (for base)
3726 * @ioc: per adapter object
3727 * @reset_phase: phase
3729 * The handler for doing any required cleanup or initialization.
3731 * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
3732 * MPT2_IOC_DONE_RESET
3737 _base_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int reset_phase
)
3739 switch (reset_phase
) {
3740 case MPT2_IOC_PRE_RESET
:
3741 dtmprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: "
3742 "MPT2_IOC_PRE_RESET\n", ioc
->name
, __func__
));
3744 case MPT2_IOC_AFTER_RESET
:
3745 dtmprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: "
3746 "MPT2_IOC_AFTER_RESET\n", ioc
->name
, __func__
));
3747 if (ioc
->transport_cmds
.status
& MPT2_CMD_PENDING
) {
3748 ioc
->transport_cmds
.status
|= MPT2_CMD_RESET
;
3749 mpt2sas_base_free_smid(ioc
, ioc
->transport_cmds
.smid
);
3750 complete(&ioc
->transport_cmds
.done
);
3752 if (ioc
->base_cmds
.status
& MPT2_CMD_PENDING
) {
3753 ioc
->base_cmds
.status
|= MPT2_CMD_RESET
;
3754 mpt2sas_base_free_smid(ioc
, ioc
->base_cmds
.smid
);
3755 complete(&ioc
->base_cmds
.done
);
3757 if (ioc
->config_cmds
.status
& MPT2_CMD_PENDING
) {
3758 ioc
->config_cmds
.status
|= MPT2_CMD_RESET
;
3759 mpt2sas_base_free_smid(ioc
, ioc
->config_cmds
.smid
);
3760 ioc
->config_cmds
.smid
= USHRT_MAX
;
3761 complete(&ioc
->config_cmds
.done
);
3764 case MPT2_IOC_DONE_RESET
:
3765 dtmprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: "
3766 "MPT2_IOC_DONE_RESET\n", ioc
->name
, __func__
));
3769 mpt2sas_scsih_reset_handler(ioc
, reset_phase
);
3770 mpt2sas_ctl_reset_handler(ioc
, reset_phase
);
3774 * _wait_for_commands_to_complete - reset controller
3775 * @ioc: Pointer to MPT_ADAPTER structure
3776 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3778 * This function waiting(3s) for all pending commands to complete
3779 * prior to putting controller in reset.
3782 _wait_for_commands_to_complete(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3785 unsigned long flags
;
3788 ioc
->pending_io_count
= 0;
3789 if (sleep_flag
!= CAN_SLEEP
)
3792 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 0);
3793 if ((ioc_state
& MPI2_IOC_STATE_MASK
) != MPI2_IOC_STATE_OPERATIONAL
)
3796 /* pending command count */
3797 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
3798 for (i
= 0; i
< ioc
->scsiio_depth
; i
++)
3799 if (ioc
->scsi_lookup
[i
].cb_idx
!= 0xFF)
3800 ioc
->pending_io_count
++;
3801 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
3803 if (!ioc
->pending_io_count
)
3806 /* wait for pending commands to complete */
3807 wait_event_timeout(ioc
->reset_wq
, ioc
->pending_io_count
== 0, 3 * HZ
);
3811 * mpt2sas_base_hard_reset_handler - reset controller
3812 * @ioc: Pointer to MPT_ADAPTER structure
3813 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3814 * @type: FORCE_BIG_HAMMER or SOFT_RESET
3816 * Returns 0 for success, non-zero for failure.
3819 mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
,
3820 enum reset_type type
)
3823 unsigned long flags
;
3825 dtmprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: enter\n", ioc
->name
,
3828 if (mpt2sas_fwfault_debug
)
3829 mpt2sas_halt_firmware(ioc
);
3831 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
3832 if (ioc
->shost_recovery
) {
3833 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
3834 printk(MPT2SAS_ERR_FMT
"%s: busy\n",
3835 ioc
->name
, __func__
);
3838 ioc
->shost_recovery
= 1;
3839 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
3841 _base_reset_handler(ioc
, MPT2_IOC_PRE_RESET
);
3842 _wait_for_commands_to_complete(ioc
, sleep_flag
);
3843 _base_mask_interrupts(ioc
);
3844 r
= _base_make_ioc_ready(ioc
, sleep_flag
, type
);
3847 _base_reset_handler(ioc
, MPT2_IOC_AFTER_RESET
);
3848 r
= _base_make_ioc_operational(ioc
, sleep_flag
);
3850 _base_reset_handler(ioc
, MPT2_IOC_DONE_RESET
);
3852 dtmprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s: %s\n",
3853 ioc
->name
, __func__
, ((r
== 0) ? "SUCCESS" : "FAILED")));
3855 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
3856 ioc
->shost_recovery
= 0;
3857 complete(&ioc
->shost_recovery_done
);
3858 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);