drivers/tty/serial/clps711x.c

   1 /*
   2  *  Driver for CLPS711x serial ports
   3  *
   4  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   5  *
   6  *  Copyright 1999 ARM Limited
   7  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  */
  14
  15 #if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  16 #define SUPPORT_SYSRQ
  17 #endif
  18
  19 #include <linux/module.h>
  20 #include <linux/device.h>
  21 #include <linux/console.h>
  22 #include <linux/serial_core.h>
  23 #include <linux/serial.h>
  24 #include <linux/clk.h>
  25 #include <linux/io.h>
  26 #include <linux/tty.h>
  27 #include <linux/tty_flip.h>
  28 #include <linux/ioport.h>
  29 #include <linux/of.h>
  30 #include <linux/platform_device.h>
  31 #include <linux/regmap.h>
  32
  33 #include <linux/mfd/syscon.h>
  34 #include <linux/mfd/syscon/clps711x.h>
  35
  36 #define UART_CLPS711X_DEVNAME   "ttyCL"
  37 #define UART_CLPS711X_NR        2
  38 #define UART_CLPS711X_MAJOR     204
  39 #define UART_CLPS711X_MINOR     40
  40
  41 #define UARTDR_OFFSET           (0x00)
  42 #define UBRLCR_OFFSET           (0x40)
  43
  44 #define UARTDR_FRMERR           (1 << 8)
  45 #define UARTDR_PARERR           (1 << 9)
  46 #define UARTDR_OVERR            (1 << 10)
  47
  48 #define UBRLCR_BAUD_MASK        ((1 << 12) - 1)
  49 #define UBRLCR_BREAK            (1 << 12)
  50 #define UBRLCR_PRTEN            (1 << 13)
  51 #define UBRLCR_EVENPRT          (1 << 14)
  52 #define UBRLCR_XSTOP            (1 << 15)
  53 #define UBRLCR_FIFOEN           (1 << 16)
  54 #define UBRLCR_WRDLEN5          (0 << 17)
  55 #define UBRLCR_WRDLEN6          (1 << 17)
  56 #define UBRLCR_WRDLEN7          (2 << 17)
  57 #define UBRLCR_WRDLEN8          (3 << 17)
  58 #define UBRLCR_WRDLEN_MASK      (3 << 17)
  59
  60 struct clps711x_port {
  61         struct uart_port        port;
  62         unsigned int            tx_enabled;
  63         int                     rx_irq;
  64         struct regmap           *syscon;
  65         bool                    use_ms;
  66 };
  67
  68 static struct uart_driver clps711x_uart = {
  69         .owner          = THIS_MODULE,
  70         .driver_name    = UART_CLPS711X_DEVNAME,
  71         .dev_name       = UART_CLPS711X_DEVNAME,
  72         .major          = UART_CLPS711X_MAJOR,
  73         .minor          = UART_CLPS711X_MINOR,
  74         .nr             = UART_CLPS711X_NR,
  75 };
  76
  77 static void uart_clps711x_stop_tx(struct uart_port *port)
  78 {
  79         struct clps711x_port *s = dev_get_drvdata(port->dev);
  80
  81         if (s->tx_enabled) {
  82                 disable_irq(port->irq);
  83                 s->tx_enabled = 0;
  84         }
  85 }
  86
  87 static void uart_clps711x_start_tx(struct uart_port *port)
  88 {
  89         struct clps711x_port *s = dev_get_drvdata(port->dev);
  90
  91         if (!s->tx_enabled) {
  92                 s->tx_enabled = 1;
  93                 enable_irq(port->irq);
  94         }
  95 }
  96
  97 static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
  98 {
  99         struct uart_port *port = dev_id;
 100         struct clps711x_port *s = dev_get_drvdata(port->dev);
 101         unsigned int status, flg;
 102         u16 ch;
 103
 104         for (;;) {
 105                 u32 sysflg = 0;
 106
 107                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 108                 if (sysflg & SYSFLG_URXFE)
 109                         break;
 110
 111                 ch = readw(port->membase + UARTDR_OFFSET);
 112                 status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
 113                 ch &= 0xff;
 114
 115                 port->icount.rx++;
 116                 flg = TTY_NORMAL;
 117
 118                 if (unlikely(status)) {
 119                         if (status & UARTDR_PARERR)
 120                                 port->icount.parity++;
 121                         else if (status & UARTDR_FRMERR)
 122                                 port->icount.frame++;
 123                         else if (status & UARTDR_OVERR)
 124                                 port->icount.overrun++;
 125
 126                         status &= port->read_status_mask;
 127
 128                         if (status & UARTDR_PARERR)
 129                                 flg = TTY_PARITY;
 130                         else if (status & UARTDR_FRMERR)
 131                                 flg = TTY_FRAME;
 132                         else if (status & UARTDR_OVERR)
 133                                 flg = TTY_OVERRUN;
 134                 }
 135
 136                 if (uart_handle_sysrq_char(port, ch))
 137                         continue;
 138
 139                 if (status & port->ignore_status_mask)
 140                         continue;
 141
 142                 uart_insert_char(port, status, UARTDR_OVERR, ch, flg);
 143         }
 144
 145         tty_flip_buffer_push(&port->state->port);
 146
 147         return IRQ_HANDLED;
 148 }
 149
 150 static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
 151 {
 152         struct uart_port *port = dev_id;
 153         struct clps711x_port *s = dev_get_drvdata(port->dev);
 154         struct circ_buf *xmit = &port->state->xmit;
 155
 156         if (port->x_char) {
 157                 writew(port->x_char, port->membase + UARTDR_OFFSET);
 158                 port->icount.tx++;
 159                 port->x_char = 0;
 160                 return IRQ_HANDLED;
 161         }
 162
 163         if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 164                 if (s->tx_enabled) {
 165                         disable_irq_nosync(port->irq);
 166                         s->tx_enabled = 0;
 167                 }
 168                 return IRQ_HANDLED;
 169         }
 170
 171         while (!uart_circ_empty(xmit)) {
 172                 u32 sysflg = 0;
 173
 174                 writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET);
 175                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 176                 port->icount.tx++;
 177
 178                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 179                 if (sysflg & SYSFLG_UTXFF)
 180                         break;
 181         }
 182
 183         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 184                 uart_write_wakeup(port);
 185
 186         return IRQ_HANDLED;
 187 }
 188
 189 static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
 190 {
 191         struct clps711x_port *s = dev_get_drvdata(port->dev);
 192         u32 sysflg = 0;
 193
 194         regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 195
 196         return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT;
 197 }
 198
 199 static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
 200 {
 201         struct clps711x_port *s = dev_get_drvdata(port->dev);
 202         unsigned int result = 0;
 203
 204         if (s->use_ms) {
 205                 u32 sysflg = 0;
 206
 207                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 208                 if (sysflg & SYSFLG1_DCD)
 209                         result |= TIOCM_CAR;
 210                 if (sysflg & SYSFLG1_DSR)
 211                         result |= TIOCM_DSR;
 212                 if (sysflg & SYSFLG1_CTS)
 213                         result |= TIOCM_CTS;
 214         } else
 215                 result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
 216
 217         return result;
 218 }
 219
 220 static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
 221 {
 222         /* Do nothing */
 223 }
 224
 225 static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
 226 {
 227         unsigned int ubrlcr;
 228
 229         ubrlcr = readl(port->membase + UBRLCR_OFFSET);
 230         if (break_state)
 231                 ubrlcr |= UBRLCR_BREAK;
 232         else
 233                 ubrlcr &= ~UBRLCR_BREAK;
 234         writel(ubrlcr, port->membase + UBRLCR_OFFSET);
 235 }
 236
 237 static void uart_clps711x_set_ldisc(struct uart_port *port, int ld)
 238 {
 239         if (!port->line) {
 240                 struct clps711x_port *s = dev_get_drvdata(port->dev);
 241
 242                 regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN,
 243                                    (ld == N_IRDA) ? SYSCON1_SIREN : 0);
 244         }
 245 }
 246
 247 static int uart_clps711x_startup(struct uart_port *port)
 248 {
 249         struct clps711x_port *s = dev_get_drvdata(port->dev);
 250
 251         /* Disable break */
 252         writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK,
 253                port->membase + UBRLCR_OFFSET);
 254
 255         /* Enable the port */
 256         return regmap_update_bits(s->syscon, SYSCON_OFFSET,
 257                                   SYSCON_UARTEN, SYSCON_UARTEN);
 258 }
 259
 260 static void uart_clps711x_shutdown(struct uart_port *port)
 261 {
 262         struct clps711x_port *s = dev_get_drvdata(port->dev);
 263
 264         /* Disable the port */
 265         regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
 266 }
 267
 268 static void uart_clps711x_set_termios(struct uart_port *port,
 269                                       struct ktermios *termios,
 270                                       struct ktermios *old)
 271 {
 272         u32 ubrlcr;
 273         unsigned int baud, quot;
 274
 275         /* Mask termios capabilities we don't support */
 276         termios->c_cflag &= ~CMSPAR;
 277         termios->c_iflag &= ~(BRKINT | IGNBRK);
 278
 279         /* Ask the core to calculate the divisor for us */
 280         baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096,
 281                                                       port->uartclk / 16);
 282         quot = uart_get_divisor(port, baud);
 283
 284         switch (termios->c_cflag & CSIZE) {
 285         case CS5:
 286                 ubrlcr = UBRLCR_WRDLEN5;
 287                 break;
 288         case CS6:
 289                 ubrlcr = UBRLCR_WRDLEN6;
 290                 break;
 291         case CS7:
 292                 ubrlcr = UBRLCR_WRDLEN7;
 293                 break;
 294         case CS8:
 295         default:
 296                 ubrlcr = UBRLCR_WRDLEN8;
 297                 break;
 298         }
 299
 300         if (termios->c_cflag & CSTOPB)
 301                 ubrlcr |= UBRLCR_XSTOP;
 302
 303         if (termios->c_cflag & PARENB) {
 304                 ubrlcr |= UBRLCR_PRTEN;
 305                 if (!(termios->c_cflag & PARODD))
 306                         ubrlcr |= UBRLCR_EVENPRT;
 307         }
 308
 309         /* Enable FIFO */
 310         ubrlcr |= UBRLCR_FIFOEN;
 311
 312         /* Set read status mask */
 313         port->read_status_mask = UARTDR_OVERR;
 314         if (termios->c_iflag & INPCK)
 315                 port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
 316
 317         /* Set status ignore mask */
 318         port->ignore_status_mask = 0;
 319         if (!(termios->c_cflag & CREAD))
 320                 port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR |
 321                                             UARTDR_FRMERR;
 322
 323         uart_update_timeout(port, termios->c_cflag, baud);
 324
 325         writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET);
 326 }
 327
 328 static const char *uart_clps711x_type(struct uart_port *port)
 329 {
 330         return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL;
 331 }
 332
 333 static void uart_clps711x_config_port(struct uart_port *port, int flags)
 334 {
 335         if (flags & UART_CONFIG_TYPE)
 336                 port->type = PORT_CLPS711X;
 337 }
 338
 339 static void uart_clps711x_nop_void(struct uart_port *port)
 340 {
 341 }
 342
 343 static int uart_clps711x_nop_int(struct uart_port *port)
 344 {
 345         return 0;
 346 }
 347
 348 static const struct uart_ops uart_clps711x_ops = {
 349         .tx_empty       = uart_clps711x_tx_empty,
 350         .set_mctrl      = uart_clps711x_set_mctrl,
 351         .get_mctrl      = uart_clps711x_get_mctrl,
 352         .stop_tx        = uart_clps711x_stop_tx,
 353         .start_tx       = uart_clps711x_start_tx,
 354         .stop_rx        = uart_clps711x_nop_void,
 355         .enable_ms      = uart_clps711x_nop_void,
 356         .break_ctl      = uart_clps711x_break_ctl,
 357         .set_ldisc      = uart_clps711x_set_ldisc,
 358         .startup        = uart_clps711x_startup,
 359         .shutdown       = uart_clps711x_shutdown,
 360         .set_termios    = uart_clps711x_set_termios,
 361         .type           = uart_clps711x_type,
 362         .config_port    = uart_clps711x_config_port,
 363         .release_port   = uart_clps711x_nop_void,
 364         .request_port   = uart_clps711x_nop_int,
 365 };
 366
 367 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
 368 static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
 369 {
 370         struct clps711x_port *s = dev_get_drvdata(port->dev);
 371         u32 sysflg = 0;
 372
 373         /* Wait for FIFO is not full */
 374         do {
 375                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 376         } while (sysflg & SYSFLG_UTXFF);
 377
 378         writew(ch, port->membase + UARTDR_OFFSET);
 379 }
 380
 381 static void uart_clps711x_console_write(struct console *co, const char *c,
 382                                         unsigned n)
 383 {
 384         struct uart_port *port = clps711x_uart.state[co->index].uart_port;
 385         struct clps711x_port *s = dev_get_drvdata(port->dev);
 386         u32 sysflg = 0;
 387
 388         uart_console_write(port, c, n, uart_clps711x_console_putchar);
 389
 390         /* Wait for transmitter to become empty */
 391         do {
 392                 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
 393         } while (sysflg & SYSFLG_UBUSY);
 394 }
 395
 396 static int uart_clps711x_console_setup(struct console *co, char *options)
 397 {
 398         int baud = 38400, bits = 8, parity = 'n', flow = 'n';
 399         int ret, index = co->index;
 400         struct clps711x_port *s;
 401         struct uart_port *port;
 402         unsigned int quot;
 403         u32 ubrlcr;
 404
 405         if (index < 0 || index >= UART_CLPS711X_NR)
 406                 return -EINVAL;
 407
 408         port = clps711x_uart.state[index].uart_port;
 409         if (!port)
 410                 return -ENODEV;
 411
 412         s = dev_get_drvdata(port->dev);
 413
 414         if (!options) {
 415                 u32 syscon = 0;
 416
 417                 regmap_read(s->syscon, SYSCON_OFFSET, &syscon);
 418                 if (syscon & SYSCON_UARTEN) {
 419                         ubrlcr = readl(port->membase + UBRLCR_OFFSET);
 420
 421                         if (ubrlcr & UBRLCR_PRTEN) {
 422                                 if (ubrlcr & UBRLCR_EVENPRT)
 423                                         parity = 'e';
 424                                 else
 425                                         parity = 'o';
 426                         }
 427
 428                         if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
 429                                 bits = 7;
 430
 431                         quot = ubrlcr & UBRLCR_BAUD_MASK;
 432                         baud = port->uartclk / (16 * (quot + 1));
 433                 }
 434         } else
 435                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 436
 437         ret = uart_set_options(port, co, baud, parity, bits, flow);
 438         if (ret)
 439                 return ret;
 440
 441         return regmap_update_bits(s->syscon, SYSCON_OFFSET,
 442                                   SYSCON_UARTEN, SYSCON_UARTEN);
 443 }
 444
 445 static struct console clps711x_console = {
 446         .name   = UART_CLPS711X_DEVNAME,
 447         .device = uart_console_device,
 448         .write  = uart_clps711x_console_write,
 449         .setup  = uart_clps711x_console_setup,
 450         .flags  = CON_PRINTBUFFER,
 451         .index  = -1,
 452 };
 453 #endif
 454
 455 static int uart_clps711x_probe(struct platform_device *pdev)
 456 {
 457         struct device_node *np = pdev->dev.of_node;
 458         int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id;
 459         struct clps711x_port *s;
 460         struct resource *res;
 461         struct clk *uart_clk;
 462
 463         if (index < 0 || index >= UART_CLPS711X_NR)
 464                 return -EINVAL;
 465
 466         s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
 467         if (!s)
 468                 return -ENOMEM;
 469
 470         uart_clk = devm_clk_get(&pdev->dev, NULL);
 471         if (IS_ERR(uart_clk))
 472                 return PTR_ERR(uart_clk);
 473
 474         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 475         s->port.membase = devm_ioremap_resource(&pdev->dev, res);
 476         if (IS_ERR(s->port.membase))
 477                 return PTR_ERR(s->port.membase);
 478
 479         s->port.irq = platform_get_irq(pdev, 0);
 480         if (IS_ERR_VALUE(s->port.irq))
 481                 return s->port.irq;
 482
 483         s->rx_irq = platform_get_irq(pdev, 1);
 484         if (IS_ERR_VALUE(s->rx_irq))
 485                 return s->rx_irq;
 486
 487         if (!np) {
 488                 char syscon_name[9];
 489
 490                 sprintf(syscon_name, "syscon.%i", index + 1);
 491                 s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name);
 492                 if (IS_ERR(s->syscon))
 493                         return PTR_ERR(s->syscon);
 494
 495                 s->use_ms = !index;
 496         } else {
 497                 s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
 498                 if (IS_ERR(s->syscon))
 499                         return PTR_ERR(s->syscon);
 500
 501                 if (!index)
 502                         s->use_ms = of_property_read_bool(np, "uart-use-ms");
 503         }
 504
 505         s->port.line            = index;
 506         s->port.dev             = &pdev->dev;
 507         s->port.iotype          = UPIO_MEM32;
 508         s->port.mapbase         = res->start;
 509         s->port.type            = PORT_CLPS711X;
 510         s->port.fifosize        = 16;
 511         s->port.flags           = UPF_SKIP_TEST | UPF_FIXED_TYPE;
 512         s->port.uartclk         = clk_get_rate(uart_clk);
 513         s->port.ops             = &uart_clps711x_ops;
 514
 515         platform_set_drvdata(pdev, s);
 516
 517         ret = uart_add_one_port(&clps711x_uart, &s->port);
 518         if (ret)
 519                 return ret;
 520
 521         /* Disable port */
 522         if (!uart_console(&s->port))
 523                 regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
 524
 525         s->tx_enabled = 1;
 526
 527         ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0,
 528                                dev_name(&pdev->dev), &s->port);
 529         if (ret) {
 530                 uart_remove_one_port(&clps711x_uart, &s->port);
 531                 return ret;
 532         }
 533
 534         ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0,
 535                                dev_name(&pdev->dev), &s->port);
 536         if (ret)
 537                 uart_remove_one_port(&clps711x_uart, &s->port);
 538
 539         return ret;
 540 }
 541
 542 static int uart_clps711x_remove(struct platform_device *pdev)
 543 {
 544         struct clps711x_port *s = platform_get_drvdata(pdev);
 545
 546         return uart_remove_one_port(&clps711x_uart, &s->port);
 547 }
 548
 549 static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = {
 550         { .compatible = "cirrus,clps711x-uart", },
 551         { }
 552 };
 553 MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids);
 554
 555 static struct platform_driver clps711x_uart_platform = {
 556         .driver = {
 557                 .name           = "clps711x-uart",
 558                 .owner          = THIS_MODULE,
 559                 .of_match_table = of_match_ptr(clps711x_uart_dt_ids),
 560         },
 561         .probe  = uart_clps711x_probe,
 562         .remove = uart_clps711x_remove,
 563 };
 564
 565 static int __init uart_clps711x_init(void)
 566 {
 567         int ret;
 568
 569 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
 570         clps711x_uart.cons = &clps711x_console;
 571         clps711x_console.data = &clps711x_uart;
 572 #endif
 573
 574         ret = uart_register_driver(&clps711x_uart);
 575         if (ret)
 576                 return ret;
 577
 578         return platform_driver_register(&clps711x_uart_platform);
 579 }
 580 module_init(uart_clps711x_init);
 581
 582 static void __exit uart_clps711x_exit(void)
 583 {
 584         platform_driver_unregister(&clps711x_uart_platform);
 585         uart_unregister_driver(&clps711x_uart);
 586 }
 587 module_exit(uart_clps711x_exit);
 588
 589 MODULE_AUTHOR("Deep Blue Solutions Ltd");
 590 MODULE_DESCRIPTION("CLPS711X serial driver");
 591 MODULE_LICENSE("GPL");