?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
powerpc: Remove function descriptors and dot symbols on new ABI
[linux-2.6/btrfs-unstable.git] / drivers / tty / serial / bcm63xx_uart.c
bloba47421e4627c5b7c0796bd72c42db572e1b8f938
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Derived from many drivers using generic_serial interface.
7 *
8 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
9 *
10 * Serial driver for BCM63xx integrated UART.
11 *
12 * Hardware flow control was _not_ tested since I only have RX/TX on
13 * my board.
14 */
15
16 #if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
17 #define SUPPORT_SYSRQ
18 #endif
19
20 #include <linux/kernel.h>
21 #include <linux/platform_device.h>
22 #include <linux/init.h>
23 #include <linux/delay.h>
24 #include <linux/module.h>
25 #include <linux/console.h>
26 #include <linux/clk.h>
27 #include <linux/tty.h>
28 #include <linux/tty_flip.h>
29 #include <linux/sysrq.h>
30 #include <linux/serial.h>
31 #include <linux/serial_core.h>
32 #include <linux/serial_bcm63xx.h>
33 #include <linux/io.h>
34 #include <linux/of.h>
35
36 #define BCM63XX_NR_UARTS 2
37
38 static struct uart_port ports[BCM63XX_NR_UARTS];
39
40 /*
41 * rx interrupt mask / stat
42 *
43 * mask:
44 * - rx fifo full
45 * - rx fifo above threshold
46 * - rx fifo not empty for too long
47 */
48 #define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \
49 UART_IR_MASK(UART_IR_RXTHRESH) | \
50 UART_IR_MASK(UART_IR_RXTIMEOUT))
51
52 #define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \
53 UART_IR_STAT(UART_IR_RXTHRESH) | \
54 UART_IR_STAT(UART_IR_RXTIMEOUT))
55
56 /*
57 * tx interrupt mask / stat
58 *
59 * mask:
60 * - tx fifo empty
61 * - tx fifo below threshold
62 */
63 #define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \
64 UART_IR_MASK(UART_IR_TXTRESH))
65
66 #define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \
67 UART_IR_STAT(UART_IR_TXTRESH))
68
69 /*
70 * external input interrupt
71 *
72 * mask: any edge on CTS, DCD
73 */
74 #define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
75 UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
76
77 /*
78 * handy uart register accessor
79 */
80 static inline unsigned int bcm_uart_readl(struct uart_port *port,
81 unsigned int offset)
82 {
83 return __raw_readl(port->membase + offset);
84 }
85
86 static inline void bcm_uart_writel(struct uart_port *port,
87 unsigned int value, unsigned int offset)
88 {
89 __raw_writel(value, port->membase + offset);
90 }
91
92 /*
93 * serial core request to check if uart tx fifo is empty
94 */
95 static unsigned int bcm_uart_tx_empty(struct uart_port *port)
96 {
97 unsigned int val;
98
99 val = bcm_uart_readl(port, UART_IR_REG);
100 return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
101 }
102
103 /*
104 * serial core request to set RTS and DTR pin state and loopback mode
105 */
106 static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
107 {
108 unsigned int val;
109
110 val = bcm_uart_readl(port, UART_MCTL_REG);
111 val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
112 /* invert of written value is reflected on the pin */
113 if (!(mctrl & TIOCM_DTR))
114 val |= UART_MCTL_DTR_MASK;
115 if (!(mctrl & TIOCM_RTS))
116 val |= UART_MCTL_RTS_MASK;
117 bcm_uart_writel(port, val, UART_MCTL_REG);
118
119 val = bcm_uart_readl(port, UART_CTL_REG);
120 if (mctrl & TIOCM_LOOP)
121 val |= UART_CTL_LOOPBACK_MASK;
122 else
123 val &= ~UART_CTL_LOOPBACK_MASK;
124 bcm_uart_writel(port, val, UART_CTL_REG);
125 }
126
127 /*
128 * serial core request to return RI, CTS, DCD and DSR pin state
129 */
130 static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
131 {
132 unsigned int val, mctrl;
133
134 mctrl = 0;
135 val = bcm_uart_readl(port, UART_EXTINP_REG);
136 if (val & UART_EXTINP_RI_MASK)
137 mctrl |= TIOCM_RI;
138 if (val & UART_EXTINP_CTS_MASK)
139 mctrl |= TIOCM_CTS;
140 if (val & UART_EXTINP_DCD_MASK)
141 mctrl |= TIOCM_CD;
142 if (val & UART_EXTINP_DSR_MASK)
143 mctrl |= TIOCM_DSR;
144 return mctrl;
145 }
146
147 /*
148 * serial core request to disable tx ASAP (used for flow control)
149 */
150 static void bcm_uart_stop_tx(struct uart_port *port)
151 {
152 unsigned int val;
153
154 val = bcm_uart_readl(port, UART_CTL_REG);
155 val &= ~(UART_CTL_TXEN_MASK);
156 bcm_uart_writel(port, val, UART_CTL_REG);
157
158 val = bcm_uart_readl(port, UART_IR_REG);
159 val &= ~UART_TX_INT_MASK;
160 bcm_uart_writel(port, val, UART_IR_REG);
161 }
162
163 /*
164 * serial core request to (re)enable tx
165 */
166 static void bcm_uart_start_tx(struct uart_port *port)
167 {
168 unsigned int val;
169
170 val = bcm_uart_readl(port, UART_IR_REG);
171 val |= UART_TX_INT_MASK;
172 bcm_uart_writel(port, val, UART_IR_REG);
173
174 val = bcm_uart_readl(port, UART_CTL_REG);
175 val |= UART_CTL_TXEN_MASK;
176 bcm_uart_writel(port, val, UART_CTL_REG);
177 }
178
179 /*
180 * serial core request to stop rx, called before port shutdown
181 */
182 static void bcm_uart_stop_rx(struct uart_port *port)
183 {
184 unsigned int val;
185
186 val = bcm_uart_readl(port, UART_IR_REG);
187 val &= ~UART_RX_INT_MASK;
188 bcm_uart_writel(port, val, UART_IR_REG);
189 }
190
191 /*
192 * serial core request to enable modem status interrupt reporting
193 */
194 static void bcm_uart_enable_ms(struct uart_port *port)
195 {
196 unsigned int val;
197
198 val = bcm_uart_readl(port, UART_IR_REG);
199 val |= UART_IR_MASK(UART_IR_EXTIP);
200 bcm_uart_writel(port, val, UART_IR_REG);
201 }
202
203 /*
204 * serial core request to start/stop emitting break char
205 */
206 static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
207 {
208 unsigned long flags;
209 unsigned int val;
210
211 spin_lock_irqsave(&port->lock, flags);
212
213 val = bcm_uart_readl(port, UART_CTL_REG);
214 if (ctl)
215 val |= UART_CTL_XMITBRK_MASK;
216 else
217 val &= ~UART_CTL_XMITBRK_MASK;
218 bcm_uart_writel(port, val, UART_CTL_REG);
219
220 spin_unlock_irqrestore(&port->lock, flags);
221 }
222
223 /*
224 * return port type in string format
225 */
226 static const char *bcm_uart_type(struct uart_port *port)
227 {
228 return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
229 }
230
231 /*
232 * read all chars in rx fifo and send them to core
233 */
234 static void bcm_uart_do_rx(struct uart_port *port)
235 {
236 struct tty_port *tty_port = &port->state->port;
237 unsigned int max_count;
238
239 /* limit number of char read in interrupt, should not be
240 * higher than fifo size anyway since we're much faster than
241 * serial port */
242 max_count = 32;
243 do {
244 unsigned int iestat, c, cstat;
245 char flag;
246
247 /* get overrun/fifo empty information from ier
248 * register */
249 iestat = bcm_uart_readl(port, UART_IR_REG);
250
251 if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
252 unsigned int val;
253
254 /* fifo reset is required to clear
255 * interrupt */
256 val = bcm_uart_readl(port, UART_CTL_REG);
257 val |= UART_CTL_RSTRXFIFO_MASK;
258 bcm_uart_writel(port, val, UART_CTL_REG);
259
260 port->icount.overrun++;
261 tty_insert_flip_char(tty_port, 0, TTY_OVERRUN);
262 }
263
264 if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
265 break;
266
267 cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
268 port->icount.rx++;
269 flag = TTY_NORMAL;
270 c &= 0xff;
271
272 if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
273 /* do stats first */
274 if (cstat & UART_FIFO_BRKDET_MASK) {
275 port->icount.brk++;
276 if (uart_handle_break(port))
277 continue;
278 }
279
280 if (cstat & UART_FIFO_PARERR_MASK)
281 port->icount.parity++;
282 if (cstat & UART_FIFO_FRAMEERR_MASK)
283 port->icount.frame++;
284
285 /* update flag wrt read_status_mask */
286 cstat &= port->read_status_mask;
287 if (cstat & UART_FIFO_BRKDET_MASK)
288 flag = TTY_BREAK;
289 if (cstat & UART_FIFO_FRAMEERR_MASK)
290 flag = TTY_FRAME;
291 if (cstat & UART_FIFO_PARERR_MASK)
292 flag = TTY_PARITY;
293 }
294
295 if (uart_handle_sysrq_char(port, c))
296 continue;
297
298
299 if ((cstat & port->ignore_status_mask) == 0)
300 tty_insert_flip_char(tty_port, c, flag);
301
302 } while (--max_count);
303
304 spin_unlock(&port->lock);
305 tty_flip_buffer_push(tty_port);
306 spin_lock(&port->lock);
307 }
308
309 /*
310 * fill tx fifo with chars to send, stop when fifo is about to be full
311 * or when all chars have been sent.
312 */
313 static void bcm_uart_do_tx(struct uart_port *port)
314 {
315 struct circ_buf *xmit;
316 unsigned int val, max_count;
317
318 if (port->x_char) {
319 bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
320 port->icount.tx++;
321 port->x_char = 0;
322 return;
323 }
324
325 if (uart_tx_stopped(port)) {
326 bcm_uart_stop_tx(port);
327 return;
328 }
329
330 xmit = &port->state->xmit;
331 if (uart_circ_empty(xmit))
332 goto txq_empty;
333
334 val = bcm_uart_readl(port, UART_MCTL_REG);
335 val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
336 max_count = port->fifosize - val;
337
338 while (max_count--) {
339 unsigned int c;
340
341 c = xmit->buf[xmit->tail];
342 bcm_uart_writel(port, c, UART_FIFO_REG);
343 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
344 port->icount.tx++;
345 if (uart_circ_empty(xmit))
346 break;
347 }
348
349 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
350 uart_write_wakeup(port);
351
352 if (uart_circ_empty(xmit))
353 goto txq_empty;
354 return;
355
356 txq_empty:
357 /* nothing to send, disable transmit interrupt */
358 val = bcm_uart_readl(port, UART_IR_REG);
359 val &= ~UART_TX_INT_MASK;
360 bcm_uart_writel(port, val, UART_IR_REG);
361 return;
362 }
363
364 /*
365 * process uart interrupt
366 */
367 static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
368 {
369 struct uart_port *port;
370 unsigned int irqstat;
371
372 port = dev_id;
373 spin_lock(&port->lock);
374
375 irqstat = bcm_uart_readl(port, UART_IR_REG);
376 if (irqstat & UART_RX_INT_STAT)
377 bcm_uart_do_rx(port);
378
379 if (irqstat & UART_TX_INT_STAT)
380 bcm_uart_do_tx(port);
381
382 if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
383 unsigned int estat;
384
385 estat = bcm_uart_readl(port, UART_EXTINP_REG);
386 if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
387 uart_handle_cts_change(port,
388 estat & UART_EXTINP_CTS_MASK);
389 if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
390 uart_handle_dcd_change(port,
391 estat & UART_EXTINP_DCD_MASK);
392 }
393
394 spin_unlock(&port->lock);
395 return IRQ_HANDLED;
396 }
397
398 /*
399 * enable rx & tx operation on uart
400 */
401 static void bcm_uart_enable(struct uart_port *port)
402 {
403 unsigned int val;
404
405 val = bcm_uart_readl(port, UART_CTL_REG);
406 val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
407 bcm_uart_writel(port, val, UART_CTL_REG);
408 }
409
410 /*
411 * disable rx & tx operation on uart
412 */
413 static void bcm_uart_disable(struct uart_port *port)
414 {
415 unsigned int val;
416
417 val = bcm_uart_readl(port, UART_CTL_REG);
418 val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
419 UART_CTL_RXEN_MASK);
420 bcm_uart_writel(port, val, UART_CTL_REG);
421 }
422
423 /*
424 * clear all unread data in rx fifo and unsent data in tx fifo
425 */
426 static void bcm_uart_flush(struct uart_port *port)
427 {
428 unsigned int val;
429
430 /* empty rx and tx fifo */
431 val = bcm_uart_readl(port, UART_CTL_REG);
432 val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
433 bcm_uart_writel(port, val, UART_CTL_REG);
434
435 /* read any pending char to make sure all irq status are
436 * cleared */
437 (void)bcm_uart_readl(port, UART_FIFO_REG);
438 }
439
440 /*
441 * serial core request to initialize uart and start rx operation
442 */
443 static int bcm_uart_startup(struct uart_port *port)
444 {
445 unsigned int val;
446 int ret;
447
448 /* mask all irq and flush port */
449 bcm_uart_disable(port);
450 bcm_uart_writel(port, 0, UART_IR_REG);
451 bcm_uart_flush(port);
452
453 /* clear any pending external input interrupt */
454 (void)bcm_uart_readl(port, UART_EXTINP_REG);
455
456 /* set rx/tx fifo thresh to fifo half size */
457 val = bcm_uart_readl(port, UART_MCTL_REG);
458 val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
459 val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
460 val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
461 bcm_uart_writel(port, val, UART_MCTL_REG);
462
463 /* set rx fifo timeout to 1 char time */
464 val = bcm_uart_readl(port, UART_CTL_REG);
465 val &= ~UART_CTL_RXTMOUTCNT_MASK;
466 val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
467 bcm_uart_writel(port, val, UART_CTL_REG);
468
469 /* report any edge on dcd and cts */
470 val = UART_EXTINP_INT_MASK;
471 val |= UART_EXTINP_DCD_NOSENSE_MASK;
472 val |= UART_EXTINP_CTS_NOSENSE_MASK;
473 bcm_uart_writel(port, val, UART_EXTINP_REG);
474
475 /* register irq and enable rx interrupts */
476 ret = request_irq(port->irq, bcm_uart_interrupt, 0,
477 bcm_uart_type(port), port);
478 if (ret)
479 return ret;
480 bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
481 bcm_uart_enable(port);
482 return 0;
483 }
484
485 /*
486 * serial core request to flush & disable uart
487 */
488 static void bcm_uart_shutdown(struct uart_port *port)
489 {
490 unsigned long flags;
491
492 spin_lock_irqsave(&port->lock, flags);
493 bcm_uart_writel(port, 0, UART_IR_REG);
494 spin_unlock_irqrestore(&port->lock, flags);
495
496 bcm_uart_disable(port);
497 bcm_uart_flush(port);
498 free_irq(port->irq, port);
499 }
500
501 /*
502 * serial core request to change current uart setting
503 */
504 static void bcm_uart_set_termios(struct uart_port *port,
505 struct ktermios *new,
506 struct ktermios *old)
507 {
508 unsigned int ctl, baud, quot, ier;
509 unsigned long flags;
510
511 spin_lock_irqsave(&port->lock, flags);
512
513 /* disable uart while changing speed */
514 bcm_uart_disable(port);
515 bcm_uart_flush(port);
516
517 /* update Control register */
518 ctl = bcm_uart_readl(port, UART_CTL_REG);
519 ctl &= ~UART_CTL_BITSPERSYM_MASK;
520
521 switch (new->c_cflag & CSIZE) {
522 case CS5:
523 ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
524 break;
525 case CS6:
526 ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
527 break;
528 case CS7:
529 ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
530 break;
531 default:
532 ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
533 break;
534 }
535
536 ctl &= ~UART_CTL_STOPBITS_MASK;
537 if (new->c_cflag & CSTOPB)
538 ctl |= UART_CTL_STOPBITS_2;
539 else
540 ctl |= UART_CTL_STOPBITS_1;
541
542 ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
543 if (new->c_cflag & PARENB)
544 ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
545 ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
546 if (new->c_cflag & PARODD)
547 ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
548 bcm_uart_writel(port, ctl, UART_CTL_REG);
549
550 /* update Baudword register */
551 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
552 quot = uart_get_divisor(port, baud) - 1;
553 bcm_uart_writel(port, quot, UART_BAUD_REG);
554
555 /* update Interrupt register */
556 ier = bcm_uart_readl(port, UART_IR_REG);
557
558 ier &= ~UART_IR_MASK(UART_IR_EXTIP);
559 if (UART_ENABLE_MS(port, new->c_cflag))
560 ier |= UART_IR_MASK(UART_IR_EXTIP);
561
562 bcm_uart_writel(port, ier, UART_IR_REG);
563
564 /* update read/ignore mask */
565 port->read_status_mask = UART_FIFO_VALID_MASK;
566 if (new->c_iflag & INPCK) {
567 port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
568 port->read_status_mask |= UART_FIFO_PARERR_MASK;
569 }
570 if (new->c_iflag & (BRKINT))
571 port->read_status_mask |= UART_FIFO_BRKDET_MASK;
572
573 port->ignore_status_mask = 0;
574 if (new->c_iflag & IGNPAR)
575 port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
576 if (new->c_iflag & IGNBRK)
577 port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
578 if (!(new->c_cflag & CREAD))
579 port->ignore_status_mask |= UART_FIFO_VALID_MASK;
580
581 uart_update_timeout(port, new->c_cflag, baud);
582 bcm_uart_enable(port);
583 spin_unlock_irqrestore(&port->lock, flags);
584 }
585
586 /*
587 * serial core request to claim uart iomem
588 */
589 static int bcm_uart_request_port(struct uart_port *port)
590 {
591 unsigned int size;
592
593 size = UART_REG_SIZE;
594 if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
595 dev_err(port->dev, "Memory region busy\n");
596 return -EBUSY;
597 }
598
599 port->membase = ioremap(port->mapbase, size);
600 if (!port->membase) {
601 dev_err(port->dev, "Unable to map registers\n");
602 release_mem_region(port->mapbase, size);
603 return -EBUSY;
604 }
605 return 0;
606 }
607
608 /*
609 * serial core request to release uart iomem
610 */
611 static void bcm_uart_release_port(struct uart_port *port)
612 {
613 release_mem_region(port->mapbase, UART_REG_SIZE);
614 iounmap(port->membase);
615 }
616
617 /*
618 * serial core request to do any port required autoconfiguration
619 */
620 static void bcm_uart_config_port(struct uart_port *port, int flags)
621 {
622 if (flags & UART_CONFIG_TYPE) {
623 if (bcm_uart_request_port(port))
624 return;
625 port->type = PORT_BCM63XX;
626 }
627 }
628
629 /*
630 * serial core request to check that port information in serinfo are
631 * suitable
632 */
633 static int bcm_uart_verify_port(struct uart_port *port,
634 struct serial_struct *serinfo)
635 {
636 if (port->type != PORT_BCM63XX)
637 return -EINVAL;
638 if (port->irq != serinfo->irq)
639 return -EINVAL;
640 if (port->iotype != serinfo->io_type)
641 return -EINVAL;
642 if (port->mapbase != (unsigned long)serinfo->iomem_base)
643 return -EINVAL;
644 return 0;
645 }
646
647 /* serial core callbacks */
648 static struct uart_ops bcm_uart_ops = {
649 .tx_empty = bcm_uart_tx_empty,
650 .get_mctrl = bcm_uart_get_mctrl,
651 .set_mctrl = bcm_uart_set_mctrl,
652 .start_tx = bcm_uart_start_tx,
653 .stop_tx = bcm_uart_stop_tx,
654 .stop_rx = bcm_uart_stop_rx,
655 .enable_ms = bcm_uart_enable_ms,
656 .break_ctl = bcm_uart_break_ctl,
657 .startup = bcm_uart_startup,
658 .shutdown = bcm_uart_shutdown,
659 .set_termios = bcm_uart_set_termios,
660 .type = bcm_uart_type,
661 .release_port = bcm_uart_release_port,
662 .request_port = bcm_uart_request_port,
663 .config_port = bcm_uart_config_port,
664 .verify_port = bcm_uart_verify_port,
665 };
666
667
668
669 #ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
670 static inline void wait_for_xmitr(struct uart_port *port)
671 {
672 unsigned int tmout;
673
674 /* Wait up to 10ms for the character(s) to be sent. */
675 tmout = 10000;
676 while (--tmout) {
677 unsigned int val;
678
679 val = bcm_uart_readl(port, UART_IR_REG);
680 if (val & UART_IR_STAT(UART_IR_TXEMPTY))
681 break;
682 udelay(1);
683 }
684
685 /* Wait up to 1s for flow control if necessary */
686 if (port->flags & UPF_CONS_FLOW) {
687 tmout = 1000000;
688 while (--tmout) {
689 unsigned int val;
690
691 val = bcm_uart_readl(port, UART_EXTINP_REG);
692 if (val & UART_EXTINP_CTS_MASK)
693 break;
694 udelay(1);
695 }
696 }
697 }
698
699 /*
700 * output given char
701 */
702 static void bcm_console_putchar(struct uart_port *port, int ch)
703 {
704 wait_for_xmitr(port);
705 bcm_uart_writel(port, ch, UART_FIFO_REG);
706 }
707
708 /*
709 * console core request to output given string
710 */
711 static void bcm_console_write(struct console *co, const char *s,
712 unsigned int count)
713 {
714 struct uart_port *port;
715 unsigned long flags;
716 int locked;
717
718 port = &ports[co->index];
719
720 local_irq_save(flags);
721 if (port->sysrq) {
722 /* bcm_uart_interrupt() already took the lock */
723 locked = 0;
724 } else if (oops_in_progress) {
725 locked = spin_trylock(&port->lock);
726 } else {
727 spin_lock(&port->lock);
728 locked = 1;
729 }
730
731 /* call helper to deal with \r\n */
732 uart_console_write(port, s, count, bcm_console_putchar);
733
734 /* and wait for char to be transmitted */
735 wait_for_xmitr(port);
736
737 if (locked)
738 spin_unlock(&port->lock);
739 local_irq_restore(flags);
740 }
741
742 /*
743 * console core request to setup given console, find matching uart
744 * port and setup it.
745 */
746 static int bcm_console_setup(struct console *co, char *options)
747 {
748 struct uart_port *port;
749 int baud = 9600;
750 int bits = 8;
751 int parity = 'n';
752 int flow = 'n';
753
754 if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
755 return -EINVAL;
756 port = &ports[co->index];
757 if (!port->membase)
758 return -ENODEV;
759 if (options)
760 uart_parse_options(options, &baud, &parity, &bits, &flow);
761
762 return uart_set_options(port, co, baud, parity, bits, flow);
763 }
764
765 static struct uart_driver bcm_uart_driver;
766
767 static struct console bcm63xx_console = {
768 .name = "ttyS",
769 .write = bcm_console_write,
770 .device = uart_console_device,
771 .setup = bcm_console_setup,
772 .flags = CON_PRINTBUFFER,
773 .index = -1,
774 .data = &bcm_uart_driver,
775 };
776
777 static int __init bcm63xx_console_init(void)
778 {
779 register_console(&bcm63xx_console);
780 return 0;
781 }
782
783 console_initcall(bcm63xx_console_init);
784
785 #define BCM63XX_CONSOLE (&bcm63xx_console)
786 #else
787 #define BCM63XX_CONSOLE NULL
788 #endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
789
790 static struct uart_driver bcm_uart_driver = {
791 .owner = THIS_MODULE,
792 .driver_name = "bcm63xx_uart",
793 .dev_name = "ttyS",
794 .major = TTY_MAJOR,
795 .minor = 64,
796 .nr = BCM63XX_NR_UARTS,
797 .cons = BCM63XX_CONSOLE,
798 };
799
800 /*
801 * platform driver probe/remove callback
802 */
803 static int bcm_uart_probe(struct platform_device *pdev)
804 {
805 struct resource *res_mem, *res_irq;
806 struct uart_port *port;
807 struct clk *clk;
808 int ret;
809
810 if (pdev->dev.of_node)
811 pdev->id = of_alias_get_id(pdev->dev.of_node, "uart");
812
813 if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
814 return -EINVAL;
815
816 if (ports[pdev->id].membase)
817 return -EBUSY;
818
819 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
820 if (!res_mem)
821 return -ENODEV;
822
823 res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
824 if (!res_irq)
825 return -ENODEV;
826
827 clk = clk_get(&pdev->dev, "periph");
828 if (IS_ERR(clk))
829 return -ENODEV;
830
831 port = &ports[pdev->id];
832 memset(port, 0, sizeof(*port));
833 port->iotype = UPIO_MEM;
834 port->mapbase = res_mem->start;
835 port->irq = res_irq->start;
836 port->ops = &bcm_uart_ops;
837 port->flags = UPF_BOOT_AUTOCONF;
838 port->dev = &pdev->dev;
839 port->fifosize = 16;
840 port->uartclk = clk_get_rate(clk) / 2;
841 port->line = pdev->id;
842 clk_put(clk);
843
844 ret = uart_add_one_port(&bcm_uart_driver, port);
845 if (ret) {
846 ports[pdev->id].membase = 0;
847 return ret;
848 }
849 platform_set_drvdata(pdev, port);
850 return 0;
851 }
852
853 static int bcm_uart_remove(struct platform_device *pdev)
854 {
855 struct uart_port *port;
856
857 port = platform_get_drvdata(pdev);
858 uart_remove_one_port(&bcm_uart_driver, port);
859 /* mark port as free */
860 ports[pdev->id].membase = 0;
861 return 0;
862 }
863
864 static const struct of_device_id bcm63xx_of_match[] = {
865 { .compatible = "brcm,bcm6345-uart" },
866 { /* sentinel */ }
867 };
868 MODULE_DEVICE_TABLE(of, bcm63xx_of_match);
869
870 /*
871 * platform driver stuff
872 */
873 static struct platform_driver bcm_uart_platform_driver = {
874 .probe = bcm_uart_probe,
875 .remove = bcm_uart_remove,
876 .driver = {
877 .owner = THIS_MODULE,
878 .name = "bcm63xx_uart",
879 .of_match_table = bcm63xx_of_match,
880 },
881 };
882
883 static int __init bcm_uart_init(void)
884 {
885 int ret;
886
887 ret = uart_register_driver(&bcm_uart_driver);
888 if (ret)
889 return ret;
890
891 ret = platform_driver_register(&bcm_uart_platform_driver);
892 if (ret)
893 uart_unregister_driver(&bcm_uart_driver);
894
895 return ret;
896 }
897
898 static void __exit bcm_uart_exit(void)
899 {
900 platform_driver_unregister(&bcm_uart_platform_driver);
901 uart_unregister_driver(&bcm_uart_driver);
902 }
903
904 module_init(bcm_uart_init);
905 module_exit(bcm_uart_exit);
906
907 MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
908 MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
909 MODULE_LICENSE("GPL");
(deprecated) Btrfs devel tree