drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h

   1 /*
   2  * Copyright (c) 2010 Broadcom Corporation
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #ifndef _BRCM_SDH_H_
  18 #define _BRCM_SDH_H_
  19
  20 #include <linux/skbuff.h>
  21 #include <linux/firmware.h>
  22 #include "firmware.h"
  23
  24 #define SDIO_FUNC_0             0
  25 #define SDIO_FUNC_1             1
  26 #define SDIO_FUNC_2             2
  27
  28 #define SDIOD_FBR_SIZE          0x100
  29
  30 /* io_en */
  31 #define SDIO_FUNC_ENABLE_1      0x02
  32 #define SDIO_FUNC_ENABLE_2      0x04
  33
  34 /* io_rdys */
  35 #define SDIO_FUNC_READY_1       0x02
  36 #define SDIO_FUNC_READY_2       0x04
  37
  38 /* intr_status */
  39 #define INTR_STATUS_FUNC1       0x2
  40 #define INTR_STATUS_FUNC2       0x4
  41
  42 /* Maximum number of I/O funcs */
  43 #define SDIOD_MAX_IOFUNCS       7
  44
  45 /* mask of register map */
  46 #define REG_F0_REG_MASK         0x7FF
  47 #define REG_F1_MISC_MASK        0x1FFFF
  48
  49 /* as of sdiod rev 0, supports 3 functions */
  50 #define SBSDIO_NUM_FUNCTION             3
  51
  52 /* function 0 vendor specific CCCR registers */
  53 #define SDIO_CCCR_BRCM_CARDCAP                  0xf0
  54 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT    0x02
  55 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT        0x04
  56 #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC        0x08
  57 #define SDIO_CCCR_BRCM_CARDCTRL         0xf1
  58 #define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET       0x02
  59 #define SDIO_CCCR_BRCM_SEPINT                   0xf2
  60
  61 #define  SDIO_SEPINT_MASK               0x01
  62 #define  SDIO_SEPINT_OE                 0x02
  63 #define  SDIO_SEPINT_ACT_HI             0x04
  64
  65 /* function 1 miscellaneous registers */
  66
  67 /* sprom command and status */
  68 #define SBSDIO_SPROM_CS                 0x10000
  69 /* sprom info register */
  70 #define SBSDIO_SPROM_INFO               0x10001
  71 /* sprom indirect access data byte 0 */
  72 #define SBSDIO_SPROM_DATA_LOW           0x10002
  73 /* sprom indirect access data byte 1 */
  74 #define SBSDIO_SPROM_DATA_HIGH          0x10003
  75 /* sprom indirect access addr byte 0 */
  76 #define SBSDIO_SPROM_ADDR_LOW           0x10004
  77 /* gpio select */
  78 #define SBSDIO_GPIO_SELECT              0x10005
  79 /* gpio output */
  80 #define SBSDIO_GPIO_OUT                 0x10006
  81 /* gpio enable */
  82 #define SBSDIO_GPIO_EN                  0x10007
  83 /* rev < 7, watermark for sdio device */
  84 #define SBSDIO_WATERMARK                0x10008
  85 /* control busy signal generation */
  86 #define SBSDIO_DEVICE_CTL               0x10009
  87
  88 /* SB Address Window Low (b15) */
  89 #define SBSDIO_FUNC1_SBADDRLOW          0x1000A
  90 /* SB Address Window Mid (b23:b16) */
  91 #define SBSDIO_FUNC1_SBADDRMID          0x1000B
  92 /* SB Address Window High (b31:b24)    */
  93 #define SBSDIO_FUNC1_SBADDRHIGH         0x1000C
  94 /* Frame Control (frame term/abort) */
  95 #define SBSDIO_FUNC1_FRAMECTRL          0x1000D
  96 /* ChipClockCSR (ALP/HT ctl/status) */
  97 #define SBSDIO_FUNC1_CHIPCLKCSR         0x1000E
  98 /* SdioPullUp (on cmd, d0-d2) */
  99 #define SBSDIO_FUNC1_SDIOPULLUP         0x1000F
 100 /* Write Frame Byte Count Low */
 101 #define SBSDIO_FUNC1_WFRAMEBCLO         0x10019
 102 /* Write Frame Byte Count High */
 103 #define SBSDIO_FUNC1_WFRAMEBCHI         0x1001A
 104 /* Read Frame Byte Count Low */
 105 #define SBSDIO_FUNC1_RFRAMEBCLO         0x1001B
 106 /* Read Frame Byte Count High */
 107 #define SBSDIO_FUNC1_RFRAMEBCHI         0x1001C
 108 /* MesBusyCtl (rev 11) */
 109 #define SBSDIO_FUNC1_MESBUSYCTRL        0x1001D
 110 /* Sdio Core Rev 12 */
 111 #define SBSDIO_FUNC1_WAKEUPCTRL         0x1001E
 112 #define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK         0x1
 113 #define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT        0
 114 #define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK          0x2
 115 #define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT         1
 116 #define SBSDIO_FUNC1_SLEEPCSR           0x1001F
 117 #define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK          0x1
 118 #define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT         0
 119 #define SBSDIO_FUNC1_SLEEPCSR_KSO_EN            1
 120 #define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK        0x2
 121 #define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT       1
 122
 123 #define SBSDIO_FUNC1_MISC_REG_START     0x10000 /* f1 misc register start */
 124 #define SBSDIO_FUNC1_MISC_REG_LIMIT     0x1001F /* f1 misc register end */
 125
 126 /* function 1 OCP space */
 127
 128 /* sb offset addr is <= 15 bits, 32k */
 129 #define SBSDIO_SB_OFT_ADDR_MASK         0x07FFF
 130 #define SBSDIO_SB_OFT_ADDR_LIMIT        0x08000
 131 /* with b15, maps to 32-bit SB access */
 132 #define SBSDIO_SB_ACCESS_2_4B_FLAG      0x08000
 133
 134 /* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
 135
 136 #define SBSDIO_SBADDRLOW_MASK           0x80    /* Valid bits in SBADDRLOW */
 137 #define SBSDIO_SBADDRMID_MASK           0xff    /* Valid bits in SBADDRMID */
 138 #define SBSDIO_SBADDRHIGH_MASK          0xffU   /* Valid bits in SBADDRHIGH */
 139 /* Address bits from SBADDR regs */
 140 #define SBSDIO_SBWINDOW_MASK            0xffff8000
 141
 142 #define SDIOH_READ              0       /* Read request */
 143 #define SDIOH_WRITE             1       /* Write request */
 144
 145 #define SDIOH_DATA_FIX          0       /* Fixed addressing */
 146 #define SDIOH_DATA_INC          1       /* Incremental addressing */
 147
 148 /* internal return code */
 149 #define SUCCESS 0
 150 #define ERROR   1
 151
 152 /* Packet alignment for most efficient SDIO (can change based on platform) */
 153 #define BRCMF_SDALIGN   (1 << 6)
 154
 155 /* watchdog polling interval in ms */
 156 #define BRCMF_WD_POLL_MS        10
 157
 158 struct brcmf_sdreg {
 159         int func;
 160         int offset;
 161         int value;
 162 };
 163
 164 struct brcmf_sdio;
 165
 166 struct brcmf_sdio_dev {
 167         struct sdio_func *func[SDIO_MAX_FUNCS];
 168         u8 num_funcs;                   /* Supported funcs on client */
 169         u32 sbwad;                      /* Save backplane window address */
 170         struct brcmf_sdio *bus;
 171         atomic_t suspend;               /* suspend flag */
 172         wait_queue_head_t request_word_wait;
 173         wait_queue_head_t request_buffer_wait;
 174         struct device *dev;
 175         struct brcmf_bus *bus_if;
 176         struct brcmfmac_sdio_platform_data *pdata;
 177         bool oob_irq_requested;
 178         bool irq_en;                    /* irq enable flags */
 179         spinlock_t irq_en_lock;
 180         bool irq_wake;                  /* irq wake enable flags */
 181         bool sg_support;
 182         uint max_request_size;
 183         ushort max_segment_count;
 184         uint max_segment_size;
 185         uint txglomsz;
 186         struct sg_table sgtable;
 187         char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
 188         char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
 189 };
 190
 191 /* sdio core registers */
 192 struct sdpcmd_regs {
 193         u32 corecontrol;                /* 0x00, rev8 */
 194         u32 corestatus;                 /* rev8 */
 195         u32 PAD[1];
 196         u32 biststatus;                 /* rev8 */
 197
 198         /* PCMCIA access */
 199         u16 pcmciamesportaladdr;        /* 0x010, rev8 */
 200         u16 PAD[1];
 201         u16 pcmciamesportalmask;        /* rev8 */
 202         u16 PAD[1];
 203         u16 pcmciawrframebc;            /* rev8 */
 204         u16 PAD[1];
 205         u16 pcmciaunderflowtimer;       /* rev8 */
 206         u16 PAD[1];
 207
 208         /* interrupt */
 209         u32 intstatus;                  /* 0x020, rev8 */
 210         u32 hostintmask;                /* rev8 */
 211         u32 intmask;                    /* rev8 */
 212         u32 sbintstatus;                /* rev8 */
 213         u32 sbintmask;                  /* rev8 */
 214         u32 funcintmask;                /* rev4 */
 215         u32 PAD[2];
 216         u32 tosbmailbox;                /* 0x040, rev8 */
 217         u32 tohostmailbox;              /* rev8 */
 218         u32 tosbmailboxdata;            /* rev8 */
 219         u32 tohostmailboxdata;          /* rev8 */
 220
 221         /* synchronized access to registers in SDIO clock domain */
 222         u32 sdioaccess;                 /* 0x050, rev8 */
 223         u32 PAD[3];
 224
 225         /* PCMCIA frame control */
 226         u8 pcmciaframectrl;             /* 0x060, rev8 */
 227         u8 PAD[3];
 228         u8 pcmciawatermark;             /* rev8 */
 229         u8 PAD[155];
 230
 231         /* interrupt batching control */
 232         u32 intrcvlazy;                 /* 0x100, rev8 */
 233         u32 PAD[3];
 234
 235         /* counters */
 236         u32 cmd52rd;                    /* 0x110, rev8 */
 237         u32 cmd52wr;                    /* rev8 */
 238         u32 cmd53rd;                    /* rev8 */
 239         u32 cmd53wr;                    /* rev8 */
 240         u32 abort;                      /* rev8 */
 241         u32 datacrcerror;               /* rev8 */
 242         u32 rdoutofsync;                /* rev8 */
 243         u32 wroutofsync;                /* rev8 */
 244         u32 writebusy;                  /* rev8 */
 245         u32 readwait;                   /* rev8 */
 246         u32 readterm;                   /* rev8 */
 247         u32 writeterm;                  /* rev8 */
 248         u32 PAD[40];
 249         u32 clockctlstatus;             /* rev8 */
 250         u32 PAD[7];
 251
 252         u32 PAD[128];                   /* DMA engines */
 253
 254         /* SDIO/PCMCIA CIS region */
 255         char cis[512];                  /* 0x400-0x5ff, rev6 */
 256
 257         /* PCMCIA function control registers */
 258         char pcmciafcr[256];            /* 0x600-6ff, rev6 */
 259         u16 PAD[55];
 260
 261         /* PCMCIA backplane access */
 262         u16 backplanecsr;               /* 0x76E, rev6 */
 263         u16 backplaneaddr0;             /* rev6 */
 264         u16 backplaneaddr1;             /* rev6 */
 265         u16 backplaneaddr2;             /* rev6 */
 266         u16 backplaneaddr3;             /* rev6 */
 267         u16 backplanedata0;             /* rev6 */
 268         u16 backplanedata1;             /* rev6 */
 269         u16 backplanedata2;             /* rev6 */
 270         u16 backplanedata3;             /* rev6 */
 271         u16 PAD[31];
 272
 273         /* sprom "size" & "blank" info */
 274         u16 spromstatus;                /* 0x7BE, rev2 */
 275         u32 PAD[464];
 276
 277         u16 PAD[0x80];
 278 };
 279
 280 /* Register/deregister interrupt handler. */
 281 int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
 282 int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 283
 284 /* sdio device register access interface */
 285 u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
 286 u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
 287 void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
 288                        int *ret);
 289 void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
 290                        int *ret);
 291
 292 /* Buffer transfer to/from device (client) core via cmd53.
 293  *   fn:       function number
 294  *   flags:    backplane width, address increment, sync/async
 295  *   buf:      pointer to memory data buffer
 296  *   nbytes:   number of bytes to transfer to/from buf
 297  *   pkt:      pointer to packet associated with buf (if any)
 298  *   complete: callback function for command completion (async only)
 299  *   handle:   handle for completion callback (first arg in callback)
 300  * Returns 0 or error code.
 301  * NOTE: Async operation is not currently supported.
 302  */
 303 int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
 304                          struct sk_buff_head *pktq);
 305 int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
 306
 307 int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt);
 308 int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
 309 int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
 310                            struct sk_buff_head *pktq, uint totlen);
 311
 312 /* Flags bits */
 313
 314 /* Four-byte target (backplane) width (vs. two-byte) */
 315 #define SDIO_REQ_4BYTE  0x1
 316 /* Fixed address (FIFO) (vs. incrementing address) */
 317 #define SDIO_REQ_FIXED  0x2
 318
 319 /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
 320  *   rw:       read or write (0/1)
 321  *   addr:     direct SDIO address
 322  *   buf:      pointer to memory data buffer
 323  *   nbytes:   number of bytes to transfer to/from buf
 324  * Returns 0 or error code.
 325  */
 326 int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 327                       u8 *data, uint size);
 328
 329 /* Issue an abort to the specified function */
 330 int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
 331
 332 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
 333 void brcmf_sdio_remove(struct brcmf_sdio *bus);
 334 void brcmf_sdio_isr(struct brcmf_sdio *bus);
 335
 336 void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick);
 337
 338 #endif                          /* _BRCM_SDH_H_ */