drivers/mfd/omap-usb-tll.c

   1 /**
   2  * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
   3  *
   4  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
   5  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
   6  *
   7  * This program is free software: you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2  of
   9  * the License as published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18  */
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/types.h>
  22 #include <linux/slab.h>
  23 #include <linux/spinlock.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/clk.h>
  26 #include <linux/io.h>
  27 #include <linux/err.h>
  28 #include <linux/pm_runtime.h>
  29 #include <linux/platform_data/usb-omap.h>
  30
  31 #define USBTLL_DRIVER_NAME      "usbhs_tll"
  32
  33 /* TLL Register Set */
  34 #define OMAP_USBTLL_REVISION                            (0x00)
  35 #define OMAP_USBTLL_SYSCONFIG                           (0x10)
  36 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY                 (1 << 8)
  37 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE                 (1 << 3)
  38 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP                 (1 << 2)
  39 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET                 (1 << 1)
  40 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE                  (1 << 0)
  41
  42 #define OMAP_USBTLL_SYSSTATUS                           (0x14)
  43 #define OMAP_USBTLL_SYSSTATUS_RESETDONE                 (1 << 0)
  44
  45 #define OMAP_USBTLL_IRQSTATUS                           (0x18)
  46 #define OMAP_USBTLL_IRQENABLE                           (0x1C)
  47
  48 #define OMAP_TLL_SHARED_CONF                            (0x30)
  49 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN             (1 << 6)
  50 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN            (1 << 5)
  51 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION              (1 << 2)
  52 #define OMAP_TLL_SHARED_CONF_FCLK_REQ                   (1 << 1)
  53 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON                 (1 << 0)
  54
  55 #define OMAP_TLL_CHANNEL_CONF(num)                      (0x040 + 0x004 * num)
  56 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT            24
  57 #define OMAP_TLL_CHANNEL_CONF_DRVVBUS                   (1 << 16)
  58 #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS                  (1 << 15)
  59 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF            (1 << 11)
  60 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE         (1 << 10)
  61 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE              (1 << 9)
  62 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE               (1 << 8)
  63 #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI     (2 << 1)
  64 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS             (1 << 1)
  65 #define OMAP_TLL_CHANNEL_CONF_CHANEN                    (1 << 0)
  66
  67 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0              0x0
  68 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM                0x1
  69 #define OMAP_TLL_FSLSMODE_3PIN_PHY                      0x2
  70 #define OMAP_TLL_FSLSMODE_4PIN_PHY                      0x3
  71 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0              0x4
  72 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM                0x5
  73 #define OMAP_TLL_FSLSMODE_3PIN_TLL                      0x6
  74 #define OMAP_TLL_FSLSMODE_4PIN_TLL                      0x7
  75 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0              0xA
  76 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM                0xB
  77
  78 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num)                (0x804 + 0x100 * num)
  79 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num)               (0x807 + 0x100 * num)
  80 #define OMAP_TLL_ULPI_OTG_CTRL(num)                     (0x80A + 0x100 * num)
  81 #define OMAP_TLL_ULPI_INT_EN_RISE(num)                  (0x80D + 0x100 * num)
  82 #define OMAP_TLL_ULPI_INT_EN_FALL(num)                  (0x810 + 0x100 * num)
  83 #define OMAP_TLL_ULPI_INT_STATUS(num)                   (0x813 + 0x100 * num)
  84 #define OMAP_TLL_ULPI_INT_LATCH(num)                    (0x814 + 0x100 * num)
  85 #define OMAP_TLL_ULPI_DEBUG(num)                        (0x815 + 0x100 * num)
  86 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)             (0x816 + 0x100 * num)
  87
  88 #define OMAP_REV2_TLL_CHANNEL_COUNT                     2
  89 #define OMAP_TLL_CHANNEL_COUNT                          3
  90 #define OMAP_TLL_CHANNEL_1_EN_MASK                      (1 << 0)
  91 #define OMAP_TLL_CHANNEL_2_EN_MASK                      (1 << 1)
  92 #define OMAP_TLL_CHANNEL_3_EN_MASK                      (1 << 2)
  93
  94 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */
  95 #define OMAP_USBTLL_REV1                0x00000015      /* OMAP3 */
  96 #define OMAP_USBTLL_REV2                0x00000018      /* OMAP 3630 */
  97 #define OMAP_USBTLL_REV3                0x00000004      /* OMAP4 */
  98 #define OMAP_USBTLL_REV4                0x00000006      /* OMAP5 */
  99
 100 #define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
 101
 102 /* only PHY and UNUSED modes don't need TLL */
 103 #define omap_usb_mode_needs_tll(x)      ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\
 104                                          (x) != OMAP_EHCI_PORT_MODE_PHY)
 105
 106 struct usbtll_omap {
 107         int                                     nch;    /* num. of channels */
 108         struct usbhs_omap_platform_data         *pdata;
 109         struct clk                              **ch_clk;
 110 };
 111
 112 /*-------------------------------------------------------------------------*/
 113
 114 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
 115 static struct device    *tll_dev;
 116 static DEFINE_SPINLOCK(tll_lock);       /* serialize access to tll_dev */
 117
 118 /*-------------------------------------------------------------------------*/
 119
 120 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
 121 {
 122         __raw_writel(val, base + reg);
 123 }
 124
 125 static inline u32 usbtll_read(void __iomem *base, u32 reg)
 126 {
 127         return __raw_readl(base + reg);
 128 }
 129
 130 static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val)
 131 {
 132         __raw_writeb(val, base + reg);
 133 }
 134
 135 static inline u8 usbtll_readb(void __iomem *base, u8 reg)
 136 {
 137         return __raw_readb(base + reg);
 138 }
 139
 140 /*-------------------------------------------------------------------------*/
 141
 142 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
 143 {
 144         switch (pmode) {
 145         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 146         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 147         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 148         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 149         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 150         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 151         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 152         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 153         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 154         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 155                 return true;
 156
 157         default:
 158                 return false;
 159         }
 160 }
 161
 162 /*
 163  * convert the port-mode enum to a value we can use in the FSLSMODE
 164  * field of USBTLL_CHANNEL_CONF
 165  */
 166 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
 167 {
 168         switch (mode) {
 169         case OMAP_USBHS_PORT_MODE_UNUSED:
 170         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 171                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
 172
 173         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 174                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
 175
 176         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 177                 return OMAP_TLL_FSLSMODE_3PIN_PHY;
 178
 179         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 180                 return OMAP_TLL_FSLSMODE_4PIN_PHY;
 181
 182         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 183                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
 184
 185         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 186                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
 187
 188         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 189                 return OMAP_TLL_FSLSMODE_3PIN_TLL;
 190
 191         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 192                 return OMAP_TLL_FSLSMODE_4PIN_TLL;
 193
 194         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 195                 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
 196
 197         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 198                 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
 199         default:
 200                 pr_warn("Invalid port mode, using default\n");
 201                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
 202         }
 203 }
 204
 205 /**
 206  * usbtll_omap_probe - initialize TI-based HCDs
 207  *
 208  * Allocates basic resources for this USB host controller.
 209  */
 210 static int usbtll_omap_probe(struct platform_device *pdev)
 211 {
 212         struct device                           *dev =  &pdev->dev;
 213         struct usbhs_omap_platform_data         *pdata = dev->platform_data;
 214         void __iomem                            *base;
 215         struct resource                         *res;
 216         struct usbtll_omap                      *tll;
 217         unsigned                                reg;
 218         int                                     ret = 0;
 219         int                                     i, ver;
 220         bool needs_tll;
 221
 222         dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
 223
 224         tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
 225         if (!tll) {
 226                 dev_err(dev, "Memory allocation failed\n");
 227                 return -ENOMEM;
 228         }
 229
 230         if (!pdata) {
 231                 dev_err(dev, "Platform data missing\n");
 232                 return -ENODEV;
 233         }
 234
 235         tll->pdata = pdata;
 236
 237         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 238         base = devm_request_and_ioremap(dev, res);
 239         if (!base) {
 240                 ret = -EADDRNOTAVAIL;
 241                 dev_err(dev, "Resource request/ioremap failed:%d\n", ret);
 242                 return ret;
 243         }
 244
 245         platform_set_drvdata(pdev, tll);
 246         pm_runtime_enable(dev);
 247         pm_runtime_get_sync(dev);
 248
 249         ver =  usbtll_read(base, OMAP_USBTLL_REVISION);
 250         switch (ver) {
 251         case OMAP_USBTLL_REV1:
 252         case OMAP_USBTLL_REV4:
 253                 tll->nch = OMAP_TLL_CHANNEL_COUNT;
 254                 break;
 255         case OMAP_USBTLL_REV2:
 256         case OMAP_USBTLL_REV3:
 257                 tll->nch = OMAP_REV2_TLL_CHANNEL_COUNT;
 258                 break;
 259         default:
 260                 tll->nch = OMAP_TLL_CHANNEL_COUNT;
 261                 dev_dbg(dev,
 262                  "USB TLL Rev : 0x%x not recognized, assuming %d channels\n",
 263                         ver, tll->nch);
 264                 break;
 265         }
 266
 267         tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]),
 268                                                 GFP_KERNEL);
 269         if (!tll->ch_clk) {
 270                 ret = -ENOMEM;
 271                 dev_err(dev, "Couldn't allocate memory for channel clocks\n");
 272                 goto err_clk_alloc;
 273         }
 274
 275         for (i = 0; i < tll->nch; i++) {
 276                 char clkname[] = "usb_tll_hs_usb_chx_clk";
 277
 278                 snprintf(clkname, sizeof(clkname),
 279                                         "usb_tll_hs_usb_ch%d_clk", i);
 280                 tll->ch_clk[i] = clk_get(dev, clkname);
 281
 282                 if (IS_ERR(tll->ch_clk[i]))
 283                         dev_dbg(dev, "can't get clock : %s\n", clkname);
 284         }
 285
 286         needs_tll = false;
 287         for (i = 0; i < tll->nch; i++)
 288                 needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
 289
 290         if (needs_tll) {
 291
 292                 /* Program Common TLL register */
 293                 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
 294                 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
 295                         | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
 296                 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
 297                 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
 298
 299                 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg);
 300
 301                 /* Enable channels now */
 302                 for (i = 0; i < tll->nch; i++) {
 303                         reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i));
 304
 305                         if (is_ohci_port(pdata->port_mode[i])) {
 306                                 reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
 307                                 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
 308                                 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
 309                         } else if (pdata->port_mode[i] ==
 310                                         OMAP_EHCI_PORT_MODE_TLL) {
 311                                 /*
 312                                  * Disable AutoIdle, BitStuffing
 313                                  * and use SDR Mode
 314                                  */
 315                                 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
 316                                         | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
 317                                         | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
 318                         } else if (pdata->port_mode[i] ==
 319                                         OMAP_EHCI_PORT_MODE_HSIC) {
 320                                 /*
 321                                  * HSIC Mode requires UTMI port configurations
 322                                  */
 323                                 reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS
 324                                  | OMAP_TLL_CHANNEL_CONF_CHRGVBUS
 325                                  | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI
 326                                  | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
 327                         } else {
 328                                 continue;
 329                         }
 330                         reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
 331                         usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg);
 332
 333                         usbtll_writeb(base,
 334                                       OMAP_TLL_ULPI_SCRATCH_REGISTER(i),
 335                                       0xbe);
 336                 }
 337         }
 338
 339         pm_runtime_put_sync(dev);
 340         /* only after this can omap_tll_enable/disable work */
 341         spin_lock(&tll_lock);
 342         tll_dev = dev;
 343         spin_unlock(&tll_lock);
 344
 345         return 0;
 346
 347 err_clk_alloc:
 348         pm_runtime_put_sync(dev);
 349         pm_runtime_disable(dev);
 350
 351         return ret;
 352 }
 353
 354 /**
 355  * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
 356  * @pdev: USB Host Controller being removed
 357  *
 358  * Reverses the effect of usbtll_omap_probe().
 359  */
 360 static int usbtll_omap_remove(struct platform_device *pdev)
 361 {
 362         struct usbtll_omap *tll = platform_get_drvdata(pdev);
 363         int i;
 364
 365         spin_lock(&tll_lock);
 366         tll_dev = NULL;
 367         spin_unlock(&tll_lock);
 368
 369         for (i = 0; i < tll->nch; i++)
 370                 if (!IS_ERR(tll->ch_clk[i]))
 371                         clk_put(tll->ch_clk[i]);
 372
 373         pm_runtime_disable(&pdev->dev);
 374         return 0;
 375 }
 376
 377 static int usbtll_runtime_resume(struct device *dev)
 378 {
 379         struct usbtll_omap                      *tll = dev_get_drvdata(dev);
 380         struct usbhs_omap_platform_data         *pdata = tll->pdata;
 381         int i;
 382
 383         dev_dbg(dev, "usbtll_runtime_resume\n");
 384
 385         for (i = 0; i < tll->nch; i++) {
 386                 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 387                         int r;
 388
 389                         if (IS_ERR(tll->ch_clk[i]))
 390                                 continue;
 391
 392                         r = clk_enable(tll->ch_clk[i]);
 393                         if (r) {
 394                                 dev_err(dev,
 395                                  "Error enabling ch %d clock: %d\n", i, r);
 396                         }
 397                 }
 398         }
 399
 400         return 0;
 401 }
 402
 403 static int usbtll_runtime_suspend(struct device *dev)
 404 {
 405         struct usbtll_omap                      *tll = dev_get_drvdata(dev);
 406         struct usbhs_omap_platform_data         *pdata = tll->pdata;
 407         int i;
 408
 409         dev_dbg(dev, "usbtll_runtime_suspend\n");
 410
 411         for (i = 0; i < tll->nch; i++) {
 412                 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 413                         if (!IS_ERR(tll->ch_clk[i]))
 414                                 clk_disable(tll->ch_clk[i]);
 415                 }
 416         }
 417
 418         return 0;
 419 }
 420
 421 static const struct dev_pm_ops usbtllomap_dev_pm_ops = {
 422         SET_RUNTIME_PM_OPS(usbtll_runtime_suspend,
 423                            usbtll_runtime_resume,
 424                            NULL)
 425 };
 426
 427 static struct platform_driver usbtll_omap_driver = {
 428         .driver = {
 429                 .name           = (char *)usbtll_driver_name,
 430                 .owner          = THIS_MODULE,
 431                 .pm             = &usbtllomap_dev_pm_ops,
 432         },
 433         .probe          = usbtll_omap_probe,
 434         .remove         = usbtll_omap_remove,
 435 };
 436
 437 int omap_tll_enable(void)
 438 {
 439         int ret;
 440
 441         spin_lock(&tll_lock);
 442
 443         if (!tll_dev) {
 444                 pr_err("%s: OMAP USB TLL not initialized\n", __func__);
 445                 ret = -ENODEV;
 446         } else {
 447                 ret = pm_runtime_get_sync(tll_dev);
 448         }
 449
 450         spin_unlock(&tll_lock);
 451
 452         return ret;
 453 }
 454 EXPORT_SYMBOL_GPL(omap_tll_enable);
 455
 456 int omap_tll_disable(void)
 457 {
 458         int ret;
 459
 460         spin_lock(&tll_lock);
 461
 462         if (!tll_dev) {
 463                 pr_err("%s: OMAP USB TLL not initialized\n", __func__);
 464                 ret = -ENODEV;
 465         } else {
 466                 ret = pm_runtime_put_sync(tll_dev);
 467         }
 468
 469         spin_unlock(&tll_lock);
 470
 471         return ret;
 472 }
 473 EXPORT_SYMBOL_GPL(omap_tll_disable);
 474
 475 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
 476 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
 477 MODULE_LICENSE("GPL v2");
 478 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
 479
 480 static int __init omap_usbtll_drvinit(void)
 481 {
 482         return platform_driver_register(&usbtll_omap_driver);
 483 }
 484
 485 /*
 486  * init before usbhs core driver;
 487  * The usbtll driver should be initialized before
 488  * the usbhs core driver probe function is called.
 489  */
 490 fs_initcall(omap_usbtll_drvinit);
 491
 492 static void __exit omap_usbtll_drvexit(void)
 493 {
 494         platform_driver_unregister(&usbtll_omap_driver);
 495 }
 496 module_exit(omap_usbtll_drvexit);