2 * Copyright 2012 Freescale Semiconductor, Inc.
3 * Copyright 2011 Linaro Ltd.
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
15 reg = <0x10000000 0x40000000>;
19 compatible = "simple-bus";
21 reg_usb_otg_vbus: usb_otg_vbus {
22 compatible = "regulator-fixed";
23 regulator-name = "usb_otg_vbus";
24 regulator-min-microvolt = <5000000>;
25 regulator-max-microvolt = <5000000>;
30 reg_usb_h1_vbus: usb_h1_vbus {
31 compatible = "regulator-fixed";
32 regulator-name = "usb_h1_vbus";
33 regulator-min-microvolt = <5000000>;
34 regulator-max-microvolt = <5000000>;
39 reg_audio: wm8962_supply {
40 compatible = "regulator-fixed";
41 regulator-name = "wm8962-supply";
48 compatible = "gpio-keys";
54 linux,code = <115>; /* KEY_VOLUMEUP */
58 label = "Volume Down";
61 linux,code = <114>; /* KEY_VOLUMEDOWN */
66 compatible = "fsl,imx6q-sabresd-wm8962",
67 "fsl,imx-audio-wm8962";
68 model = "wm8962-audio";
69 ssi-controller = <&ssi2>;
70 audio-codec = <&codec>;
72 "Headphone Jack", "HPOUTL",
73 "Headphone Jack", "HPOUTR",
85 compatible = "pwm-backlight";
86 pwms = <&pwm1 0 5000000>;
87 brightness-levels = <0 4 8 16 32 64 128 255>;
88 default-brightness-level = <7>;
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_audmux_2>;
100 fsl,spi-num-chipselects = <1>;
101 cs-gpios = <&gpio4 9 0>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_ecspi1_2>;
107 #address-cells = <1>;
109 compatible = "st,m25p32";
110 spi-max-frequency = <20000000>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&pinctrl_enet_1>;
119 phy-reset-gpios = <&gpio1 25 0>;
124 clock-frequency = <100000>;
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_i2c1_2>;
130 compatible = "wlf,wm8962";
132 clocks = <&clks 201>;
133 DCVDD-supply = <®_audio>;
134 DBVDD-supply = <®_audio>;
135 AVDD-supply = <®_audio>;
136 CPVDD-supply = <®_audio>;
137 MICVDD-supply = <®_audio>;
138 PLLVDD-supply = <®_audio>;
139 SPKVDD1-supply = <®_audio>;
140 SPKVDD2-supply = <®_audio>;
142 0x0000 /* 0:Default */
143 0x0000 /* 1:Default */
144 0x0013 /* 2:FN_DMICCLK */
145 0x0000 /* 3:Default */
146 0x8014 /* 4:FN_DMICCDAT */
147 0x0000 /* 5:Default */
153 clock-frequency = <100000>;
154 pinctrl-names = "default";
155 pinctrl-0 = <&pinctrl_i2c3_2>;
159 compatible = "eeti,egalax_ts";
161 interrupt-parent = <&gpio6>;
163 wakeup-gpios = <&gpio6 7 0>;
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_hog>;
172 pinctrl_hog: hoggrp {
174 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000
175 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000
176 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
177 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
178 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
179 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
180 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
181 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
182 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
183 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
184 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
194 fsl,data-mapping = "spwg";
195 fsl,data-width = <18>;
199 native-mode = <&timing0>;
200 timing0: hsd100pxn1 {
201 clock-frequency = <65000000>;
216 pinctrl-names = "default";
217 pinctrl-0 = <&pinctrl_pwm0_1>;
222 fsl,mode = "i2s-slave";
227 pinctrl-names = "default";
228 pinctrl-0 = <&pinctrl_uart1_1>;
233 vbus-supply = <®_usb_h1_vbus>;
238 vbus-supply = <®_usb_otg_vbus>;
239 pinctrl-names = "default";
240 pinctrl-0 = <&pinctrl_usbotg_2>;
241 disable-over-current;
246 pinctrl-names = "default";
247 pinctrl-0 = <&pinctrl_usdhc2_1>;
249 cd-gpios = <&gpio2 2 0>;
250 wp-gpios = <&gpio2 3 0>;
255 pinctrl-names = "default";
256 pinctrl-0 = <&pinctrl_usdhc3_1>;
258 cd-gpios = <&gpio2 0 0>;
259 wp-gpios = <&gpio2 1 0>;