arch/arm/plat-spear/time.c

   1 /*
   2  * arch/arm/plat-spear/time.c
   3  *
   4  * Copyright (C) 2010 ST Microelectronics
   5  * Shiraz Hashim<shiraz.hashim@st.com>
   6  *
   7  * This file is licensed under the terms of the GNU General Public
   8  * License version 2. This program is licensed "as is" without any
   9  * warranty of any kind, whether express or implied.
  10  */
  11
  12 #include <linux/clk.h>
  13 #include <linux/clockchips.h>
  14 #include <linux/clocksource.h>
  15 #include <linux/err.h>
  16 #include <linux/init.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/io.h>
  19 #include <linux/kernel.h>
  20 #include <linux/time.h>
  21 #include <linux/irq.h>
  22 #include <asm/mach/time.h>
  23 #include <mach/generic.h>
  24 #include <mach/hardware.h>
  25 #include <mach/irqs.h>
  26
  27 /*
  28  * We would use TIMER0 and TIMER1 as clockevent and clocksource.
  29  * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
  30  * they share same functional clock. Any change in one's functional clock will
  31  * also affect other timer.
  32  */
  33
  34 #define CLKEVT  0       /* gpt0, channel0 as clockevent */
  35 #define CLKSRC  1       /* gpt0, channel1 as clocksource */
  36
  37 /* Register offsets, x is channel number */
  38 #define CR(x)           ((x) * 0x80 + 0x80)
  39 #define IR(x)           ((x) * 0x80 + 0x84)
  40 #define LOAD(x)         ((x) * 0x80 + 0x88)
  41 #define COUNT(x)        ((x) * 0x80 + 0x8C)
  42
  43 /* Reg bit definitions */
  44 #define CTRL_INT_ENABLE         0x0100
  45 #define CTRL_ENABLE             0x0020
  46 #define CTRL_ONE_SHOT           0x0010
  47
  48 #define CTRL_PRESCALER1         0x0
  49 #define CTRL_PRESCALER2         0x1
  50 #define CTRL_PRESCALER4         0x2
  51 #define CTRL_PRESCALER8         0x3
  52 #define CTRL_PRESCALER16        0x4
  53 #define CTRL_PRESCALER32        0x5
  54 #define CTRL_PRESCALER64        0x6
  55 #define CTRL_PRESCALER128       0x7
  56 #define CTRL_PRESCALER256       0x8
  57
  58 #define INT_STATUS              0x1
  59
  60 /*
  61  * Minimum clocksource/clockevent timer range in seconds
  62  */
  63 #define SPEAR_MIN_RANGE 4
  64
  65 static __iomem void *gpt_base;
  66 static struct clk *gpt_clk;
  67
  68 static void clockevent_set_mode(enum clock_event_mode mode,
  69                                 struct clock_event_device *clk_event_dev);
  70 static int clockevent_next_event(unsigned long evt,
  71                                  struct clock_event_device *clk_event_dev);
  72
  73 static void spear_clocksource_init(void)
  74 {
  75         u32 tick_rate;
  76         u16 val;
  77
  78         /* program the prescaler (/256)*/
  79         writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
  80
  81         /* find out actual clock driving Timer */
  82         tick_rate = clk_get_rate(gpt_clk);
  83         tick_rate >>= CTRL_PRESCALER256;
  84
  85         writew(0xFFFF, gpt_base + LOAD(CLKSRC));
  86
  87         val = readw(gpt_base + CR(CLKSRC));
  88         val &= ~CTRL_ONE_SHOT;  /* autoreload mode */
  89         val |= CTRL_ENABLE ;
  90         writew(val, gpt_base + CR(CLKSRC));
  91
  92         /* register the clocksource */
  93         clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate,
  94                 200, 16, clocksource_mmio_readw_up);
  95 }
  96
  97 static struct clock_event_device clkevt = {
  98         .name = "tmr0",
  99         .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 100         .set_mode = clockevent_set_mode,
 101         .set_next_event = clockevent_next_event,
 102         .shift = 0,     /* to be computed */
 103 };
 104
 105 static void clockevent_set_mode(enum clock_event_mode mode,
 106                                 struct clock_event_device *clk_event_dev)
 107 {
 108         u32 period;
 109         u16 val;
 110
 111         /* stop the timer */
 112         val = readw(gpt_base + CR(CLKEVT));
 113         val &= ~CTRL_ENABLE;
 114         writew(val, gpt_base + CR(CLKEVT));
 115
 116         switch (mode) {
 117         case CLOCK_EVT_MODE_PERIODIC:
 118                 period = clk_get_rate(gpt_clk) / HZ;
 119                 period >>= CTRL_PRESCALER16;
 120                 writew(period, gpt_base + LOAD(CLKEVT));
 121
 122                 val = readw(gpt_base + CR(CLKEVT));
 123                 val &= ~CTRL_ONE_SHOT;
 124                 val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 125                 writew(val, gpt_base + CR(CLKEVT));
 126
 127                 break;
 128         case CLOCK_EVT_MODE_ONESHOT:
 129                 val = readw(gpt_base + CR(CLKEVT));
 130                 val |= CTRL_ONE_SHOT;
 131                 writew(val, gpt_base + CR(CLKEVT));
 132
 133                 break;
 134         case CLOCK_EVT_MODE_UNUSED:
 135         case CLOCK_EVT_MODE_SHUTDOWN:
 136         case CLOCK_EVT_MODE_RESUME:
 137
 138                 break;
 139         default:
 140                 pr_err("Invalid mode requested\n");
 141                 break;
 142         }
 143 }
 144
 145 static int clockevent_next_event(unsigned long cycles,
 146                                  struct clock_event_device *clk_event_dev)
 147 {
 148         u16 val;
 149
 150         writew(cycles, gpt_base + LOAD(CLKEVT));
 151
 152         val = readw(gpt_base + CR(CLKEVT));
 153         val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 154         writew(val, gpt_base + CR(CLKEVT));
 155
 156         return 0;
 157 }
 158
 159 static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
 160 {
 161         struct clock_event_device *evt = &clkevt;
 162
 163         writew(INT_STATUS, gpt_base + IR(CLKEVT));
 164
 165         evt->event_handler(evt);
 166
 167         return IRQ_HANDLED;
 168 }
 169
 170 static struct irqaction spear_timer_irq = {
 171         .name = "timer",
 172         .flags = IRQF_DISABLED | IRQF_TIMER,
 173         .handler = spear_timer_interrupt
 174 };
 175
 176 static void __init spear_clockevent_init(void)
 177 {
 178         u32 tick_rate;
 179
 180         /* program the prescaler */
 181         writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
 182
 183         tick_rate = clk_get_rate(gpt_clk);
 184         tick_rate >>= CTRL_PRESCALER16;
 185
 186         clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
 187
 188         clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
 189                         &clkevt);
 190         clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
 191
 192         clkevt.cpumask = cpumask_of(0);
 193
 194         clockevents_register_device(&clkevt);
 195
 196         setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
 197 }
 198
 199 void __init spear_setup_timer(void)
 200 {
 201         int ret;
 202
 203         if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
 204                 pr_err("%s:cannot get IO addr\n", __func__);
 205                 return;
 206         }
 207
 208         gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
 209         if (!gpt_base) {
 210                 pr_err("%s:ioremap failed for gpt\n", __func__);
 211                 goto err_mem;
 212         }
 213
 214         gpt_clk = clk_get_sys("gpt0", NULL);
 215         if (!gpt_clk) {
 216                 pr_err("%s:couldn't get clk for gpt\n", __func__);
 217                 goto err_iomap;
 218         }
 219
 220         ret = clk_enable(gpt_clk);
 221         if (ret < 0) {
 222                 pr_err("%s:couldn't enable gpt clock\n", __func__);
 223                 goto err_clk;
 224         }
 225
 226         spear_clockevent_init();
 227         spear_clocksource_init();
 228
 229         return;
 230
 231 err_clk:
 232         clk_put(gpt_clk);
 233 err_iomap:
 234         iounmap(gpt_base);
 235 err_mem:
 236         release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
 237 }