[PATCH] PCI: drivers/pci/: small cleanups
[linux-2.6/btrfs-unstable.git] / drivers / pci / hotplug / shpchp_pci.c
blob38009bc0fd5de7e21668763a958e7554347ac1f8
1 /*
2 * Standard Hot Plug Controller Driver
4 * Copyright (C) 1995,2001 Compaq Computer Corporation
5 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
6 * Copyright (C) 2001 IBM Corp.
7 * Copyright (C) 2003-2004 Intel Corporation
9 * All rights reserved.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
19 * NON INFRINGEMENT. See the GNU General Public License for more
20 * details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
30 #include <linux/module.h>
31 #include <linux/kernel.h>
32 #include <linux/types.h>
33 #include <linux/pci.h>
34 #include "../pci.h"
35 #include "shpchp.h"
37 static void program_fw_provided_values(struct pci_dev *dev)
39 u16 pci_cmd, pci_bctl;
40 struct pci_dev *cdev;
41 struct hotplug_params hpp = {0x8, 0x40, 0, 0}; /* defaults */
43 /* Program hpp values for this device */
44 if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
45 (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
46 (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
47 return;
49 get_hp_params_from_firmware(dev, &hpp);
51 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp.cache_line_size);
52 pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.latency_timer);
53 pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
54 if (hpp.enable_serr)
55 pci_cmd |= PCI_COMMAND_SERR;
56 else
57 pci_cmd &= ~PCI_COMMAND_SERR;
58 if (hpp.enable_perr)
59 pci_cmd |= PCI_COMMAND_PARITY;
60 else
61 pci_cmd &= ~PCI_COMMAND_PARITY;
62 pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
64 /* Program bridge control value and child devices */
65 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
66 pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
67 hpp.latency_timer);
68 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
69 if (hpp.enable_serr)
70 pci_bctl |= PCI_BRIDGE_CTL_SERR;
71 else
72 pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
73 if (hpp.enable_perr)
74 pci_bctl |= PCI_BRIDGE_CTL_PARITY;
75 else
76 pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
77 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
78 if (dev->subordinate) {
79 list_for_each_entry(cdev, &dev->subordinate->devices,
80 bus_list)
81 program_fw_provided_values(cdev);
86 int shpchp_configure_device(struct slot *p_slot)
88 struct pci_dev *dev;
89 struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
90 int num, fn;
92 dev = pci_find_slot(p_slot->bus, PCI_DEVFN(p_slot->device, 0));
93 if (dev) {
94 err("Device %s already exists at %x:%x, cannot hot-add\n",
95 pci_name(dev), p_slot->bus, p_slot->device);
96 return -EINVAL;
99 num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
100 if (num == 0) {
101 err("No new device found\n");
102 return -ENODEV;
105 for (fn = 0; fn < 8; fn++) {
106 if (!(dev = pci_find_slot(p_slot->bus,
107 PCI_DEVFN(p_slot->device, fn))))
108 continue;
109 if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
110 err("Cannot hot-add display device %s\n",
111 pci_name(dev));
112 continue;
114 if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
115 (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
116 /* Find an unused bus number for the new bridge */
117 struct pci_bus *child;
118 unsigned char busnr, start = parent->secondary;
119 unsigned char end = parent->subordinate;
120 for (busnr = start; busnr <= end; busnr++) {
121 if (!pci_find_bus(pci_domain_nr(parent),
122 busnr))
123 break;
125 if (busnr >= end) {
126 err("No free bus for hot-added bridge\n");
127 continue;
129 child = pci_add_new_bus(parent, dev, busnr);
130 if (!child) {
131 err("Cannot add new bus for %s\n",
132 pci_name(dev));
133 continue;
135 child->subordinate = pci_do_scan_bus(child);
136 pci_bus_size_bridges(child);
138 program_fw_provided_values(dev);
141 pci_bus_assign_resources(parent);
142 pci_bus_add_devices(parent);
143 pci_enable_bridges(parent);
144 return 0;
147 int shpchp_unconfigure_device(struct slot *p_slot)
149 int rc = 0;
150 int j;
151 u8 bctl = 0;
153 dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, p_slot->device);
155 for (j=0; j<8 ; j++) {
156 struct pci_dev* temp = pci_find_slot(p_slot->bus,
157 (p_slot->device << 3) | j);
158 if (!temp)
159 continue;
160 if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
161 err("Cannot remove display device %s\n",
162 pci_name(temp));
163 continue;
165 if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
166 pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
167 if (bctl & PCI_BRIDGE_CTL_VGA) {
168 err("Cannot remove display device %s\n",
169 pci_name(temp));
170 continue;
173 pci_remove_bus_device(temp);
175 return rc;