arch/blackfin/mach-bf561/boards/ezkit.c

   1 /*
   2  * File:         arch/blackfin/mach-bf561/ezkit.c
   3  * Based on:
   4  * Author:
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2004-2006 Analog Devices Inc.
  11  *
  12  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2 of the License, or
  17  * (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, see the file COPYING, or write
  26  * to the Free Software Foundation, Inc.,
  27  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  28  */
  29
  30 #include <linux/device.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/mtd/mtd.h>
  33 #include <linux/mtd/partitions.h>
  34 #include <linux/mtd/physmap.h>
  35 #include <linux/spi/spi.h>
  36 #include <linux/irq.h>
  37 #include <linux/interrupt.h>
  38 #include <asm/dma.h>
  39 #include <asm/bfin5xx_spi.h>
  40 #include <asm/portmux.h>
  41 #include <asm/dpmc.h>
  42
  43 /*
  44  * Name the Board for the /proc/cpuinfo
  45  */
  46 const char bfin_board_name[] = "ADI BF561-EZKIT";
  47
  48 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  49 #include <linux/usb/isp1760.h>
  50 static struct resource bfin_isp1760_resources[] = {
  51         [0] = {
  52                 .start  = 0x2C0F0000,
  53                 .end    = 0x203C0000 + 0xfffff,
  54                 .flags  = IORESOURCE_MEM,
  55         },
  56         [1] = {
  57                 .start  = IRQ_PF10,
  58                 .end    = IRQ_PF10,
  59                 .flags  = IORESOURCE_IRQ,
  60         },
  61 };
  62
  63 static struct isp1760_platform_data isp1760_priv = {
  64         .is_isp1761 = 0,
  65         .port1_disable = 0,
  66         .bus_width_16 = 1,
  67         .port1_otg = 0,
  68         .analog_oc = 0,
  69         .dack_polarity_high = 0,
  70         .dreq_polarity_high = 0,
  71 };
  72
  73 static struct platform_device bfin_isp1760_device = {
  74         .name           = "isp1760-hcd",
  75         .id             = 0,
  76         .dev = {
  77                 .platform_data = &isp1760_priv,
  78         },
  79         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  80         .resource       = bfin_isp1760_resources,
  81 };
  82 #endif
  83
  84 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  85 #include <linux/usb/isp1362.h>
  86
  87 static struct resource isp1362_hcd_resources[] = {
  88         {
  89                 .start = 0x2c060000,
  90                 .end = 0x2c060000,
  91                 .flags = IORESOURCE_MEM,
  92         }, {
  93                 .start = 0x2c060004,
  94                 .end = 0x2c060004,
  95                 .flags = IORESOURCE_MEM,
  96         }, {
  97                 .start = IRQ_PF8,
  98                 .end = IRQ_PF8,
  99                 .flags = IORESOURCE_IRQ,
 100         },
 101 };
 102
 103 static struct isp1362_platform_data isp1362_priv = {
 104         .sel15Kres = 1,
 105         .clknotstop = 0,
 106         .oc_enable = 0,
 107         .int_act_high = 0,
 108         .int_edge_triggered = 0,
 109         .remote_wakeup_connected = 0,
 110         .no_power_switching = 1,
 111         .power_switching_mode = 0,
 112 };
 113
 114 static struct platform_device isp1362_hcd_device = {
 115         .name = "isp1362-hcd",
 116         .id = 0,
 117         .dev = {
 118                 .platform_data = &isp1362_priv,
 119         },
 120         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 121         .resource = isp1362_hcd_resources,
 122 };
 123 #endif
 124
 125 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 126 static struct resource net2272_bfin_resources[] = {
 127         {
 128                 .start = 0x2C000000,
 129                 .end = 0x2C000000 + 0x7F,
 130                 .flags = IORESOURCE_MEM,
 131         }, {
 132                 .start = IRQ_PF10,
 133                 .end = IRQ_PF10,
 134                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 135         },
 136 };
 137
 138 static struct platform_device net2272_bfin_device = {
 139         .name = "net2272",
 140         .id = -1,
 141         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 142         .resource = net2272_bfin_resources,
 143 };
 144 #endif
 145
 146 /*
 147  *  USB-LAN EzExtender board
 148  *  Driver needs to know address, irq and flag pin.
 149  */
 150 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 151 static struct resource smc91x_resources[] = {
 152         {
 153                 .name = "smc91x-regs",
 154                 .start = 0x2C010300,
 155                 .end = 0x2C010300 + 16,
 156                 .flags = IORESOURCE_MEM,
 157         }, {
 158
 159                 .start = IRQ_PF9,
 160                 .end = IRQ_PF9,
 161                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 162         },
 163 };
 164
 165 static struct platform_device smc91x_device = {
 166         .name = "smc91x",
 167         .id = 0,
 168         .num_resources = ARRAY_SIZE(smc91x_resources),
 169         .resource = smc91x_resources,
 170 };
 171 #endif
 172
 173 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
 174 static struct resource ax88180_resources[] = {
 175         [0] = {
 176                 .start  = 0x2c000000,
 177                 .end    = 0x2c000000 + 0x8000,
 178                 .flags  = IORESOURCE_MEM,
 179         },
 180         [1] = {
 181                 .start  = IRQ_PF10,
 182                 .end    = IRQ_PF10,
 183                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
 184         },
 185 };
 186
 187 static struct platform_device ax88180_device = {
 188         .name           = "ax88180",
 189         .id             = -1,
 190         .num_resources  = ARRAY_SIZE(ax88180_resources),
 191         .resource       = ax88180_resources,
 192 };
 193 #endif
 194
 195 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 196 static struct resource bfin_uart_resources[] = {
 197         {
 198                 .start = 0xFFC00400,
 199                 .end = 0xFFC004FF,
 200                 .flags = IORESOURCE_MEM,
 201         },
 202 };
 203
 204 static struct platform_device bfin_uart_device = {
 205         .name = "bfin-uart",
 206         .id = 1,
 207         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 208         .resource = bfin_uart_resources,
 209 };
 210 #endif
 211
 212 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 213 #ifdef CONFIG_BFIN_SIR0
 214 static struct resource bfin_sir0_resources[] = {
 215         {
 216                 .start = 0xFFC00400,
 217                 .end = 0xFFC004FF,
 218                 .flags = IORESOURCE_MEM,
 219         },
 220         {
 221                 .start = IRQ_UART0_RX,
 222                 .end = IRQ_UART0_RX+1,
 223                 .flags = IORESOURCE_IRQ,
 224         },
 225         {
 226                 .start = CH_UART0_RX,
 227                 .end = CH_UART0_RX+1,
 228                 .flags = IORESOURCE_DMA,
 229         },
 230 };
 231
 232 static struct platform_device bfin_sir0_device = {
 233         .name = "bfin_sir",
 234         .id = 0,
 235         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 236         .resource = bfin_sir0_resources,
 237 };
 238 #endif
 239 #endif
 240
 241 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 242 static struct mtd_partition ezkit_partitions[] = {
 243         {
 244                 .name       = "bootloader(nor)",
 245                 .size       = 0x40000,
 246                 .offset     = 0,
 247         }, {
 248                 .name       = "linux kernel(nor)",
 249                 .size       = 0x1C0000,
 250                 .offset     = MTDPART_OFS_APPEND,
 251         }, {
 252                 .name       = "file system(nor)",
 253                 .size       = MTDPART_SIZ_FULL,
 254                 .offset     = MTDPART_OFS_APPEND,
 255         }
 256 };
 257
 258 static struct physmap_flash_data ezkit_flash_data = {
 259         .width      = 2,
 260         .parts      = ezkit_partitions,
 261         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 262 };
 263
 264 static struct resource ezkit_flash_resource = {
 265         .start = 0x20000000,
 266         .end   = 0x207fffff,
 267         .flags = IORESOURCE_MEM,
 268 };
 269
 270 static struct platform_device ezkit_flash_device = {
 271         .name          = "physmap-flash",
 272         .id            = 0,
 273         .dev = {
 274                 .platform_data = &ezkit_flash_data,
 275         },
 276         .num_resources = 1,
 277         .resource      = &ezkit_flash_resource,
 278 };
 279 #endif
 280
 281 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 282         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 283 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 284         .enable_dma = 0,
 285         .bits_per_word = 16,
 286 };
 287 #endif
 288
 289 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 290 static struct bfin5xx_spi_chip spidev_chip_info = {
 291         .enable_dma = 0,
 292         .bits_per_word = 8,
 293 };
 294 #endif
 295
 296 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 297 /* SPI (0) */
 298 static struct resource bfin_spi0_resource[] = {
 299         [0] = {
 300                 .start = SPI0_REGBASE,
 301                 .end   = SPI0_REGBASE + 0xFF,
 302                 .flags = IORESOURCE_MEM,
 303         },
 304         [1] = {
 305                 .start = CH_SPI,
 306                 .end   = CH_SPI,
 307                 .flags = IORESOURCE_IRQ,
 308         }
 309 };
 310
 311 /* SPI controller data */
 312 static struct bfin5xx_spi_master bfin_spi0_info = {
 313         .num_chipselect = 8,
 314         .enable_dma = 1,  /* master has the ability to do dma transfer */
 315         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 316 };
 317
 318 static struct platform_device bfin_spi0_device = {
 319         .name = "bfin-spi",
 320         .id = 0, /* Bus number */
 321         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 322         .resource = bfin_spi0_resource,
 323         .dev = {
 324                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 325         },
 326 };
 327 #endif
 328
 329 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 330 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 331         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 332         {
 333                 .modalias = "ad1836-spi",
 334                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 335                 .bus_num = 0,
 336                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 337                 .controller_data = &ad1836_spi_chip_info,
 338         },
 339 #endif
 340 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 341         {
 342                 .modalias = "spidev",
 343                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 344                 .bus_num = 0,
 345                 .chip_select = 1,
 346                 .controller_data = &spidev_chip_info,
 347         },
 348 #endif
 349 };
 350
 351 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 352 #include <linux/input.h>
 353 #include <linux/gpio_keys.h>
 354
 355 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 356         {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"},
 357         {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"},
 358         {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"},
 359         {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"},
 360 };
 361
 362 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 363         .buttons        = bfin_gpio_keys_table,
 364         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 365 };
 366
 367 static struct platform_device bfin_device_gpiokeys = {
 368         .name      = "gpio-keys",
 369         .dev = {
 370                 .platform_data = &bfin_gpio_keys_data,
 371         },
 372 };
 373 #endif
 374
 375 static struct resource bfin_gpios_resources = {
 376         .start = 0,
 377         .end   = MAX_BLACKFIN_GPIOS - 1,
 378         .flags = IORESOURCE_IRQ,
 379 };
 380
 381 static struct platform_device bfin_gpios_device = {
 382         .name = "simple-gpio",
 383         .id = -1,
 384         .num_resources = 1,
 385         .resource = &bfin_gpios_resources,
 386 };
 387
 388 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 389 #include <linux/i2c-gpio.h>
 390
 391 static struct i2c_gpio_platform_data i2c_gpio_data = {
 392         .sda_pin                = 1,
 393         .scl_pin                = 0,
 394         .sda_is_open_drain      = 0,
 395         .scl_is_open_drain      = 0,
 396         .udelay                 = 40,
 397 };
 398
 399 static struct platform_device i2c_gpio_device = {
 400         .name           = "i2c-gpio",
 401         .id             = 0,
 402         .dev            = {
 403                 .platform_data  = &i2c_gpio_data,
 404         },
 405 };
 406 #endif
 407
 408 static const unsigned int cclk_vlev_datasheet[] =
 409 {
 410         VRPAIR(VLEV_085, 250000000),
 411         VRPAIR(VLEV_090, 300000000),
 412         VRPAIR(VLEV_095, 313000000),
 413         VRPAIR(VLEV_100, 350000000),
 414         VRPAIR(VLEV_105, 400000000),
 415         VRPAIR(VLEV_110, 444000000),
 416         VRPAIR(VLEV_115, 450000000),
 417         VRPAIR(VLEV_120, 475000000),
 418         VRPAIR(VLEV_125, 500000000),
 419         VRPAIR(VLEV_130, 600000000),
 420 };
 421
 422 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 423         .tuple_tab = cclk_vlev_datasheet,
 424         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 425         .vr_settling_time = 25 /* us */,
 426 };
 427
 428 static struct platform_device bfin_dpmc = {
 429         .name = "bfin dpmc",
 430         .dev = {
 431                 .platform_data = &bfin_dmpc_vreg_data,
 432         },
 433 };
 434
 435 static struct platform_device *ezkit_devices[] __initdata = {
 436
 437         &bfin_dpmc,
 438
 439 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 440         &smc91x_device,
 441 #endif
 442
 443 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
 444         &ax88180_device,
 445 #endif
 446
 447 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 448         &net2272_bfin_device,
 449 #endif
 450
 451 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 452         &bfin_isp1760_device,
 453 #endif
 454
 455 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 456         &bfin_spi0_device,
 457 #endif
 458
 459 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 460         &bfin_uart_device,
 461 #endif
 462
 463 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 464 #ifdef CONFIG_BFIN_SIR0
 465         &bfin_sir0_device,
 466 #endif
 467 #endif
 468
 469 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 470         &bfin_device_gpiokeys,
 471 #endif
 472
 473 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 474         &i2c_gpio_device,
 475 #endif
 476
 477 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 478         &isp1362_hcd_device,
 479 #endif
 480
 481         &bfin_gpios_device,
 482
 483 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 484         &ezkit_flash_device,
 485 #endif
 486 };
 487
 488 static int __init ezkit_init(void)
 489 {
 490         int ret;
 491
 492         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 493
 494         ret = platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 495         if (ret < 0)
 496                 return ret;
 497
 498 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 499         bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
 500         SSYNC();
 501 #endif
 502
 503         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 504         return 0;
 505 }
 506
 507 arch_initcall(ezkit_init);