drivers/net/wireless/b43/phy_ht.h

   1 #ifndef B43_PHY_HT_H_
   2 #define B43_PHY_HT_H_
   3
   4 #include "phy_common.h"
   5
   6
   7 #define B43_PHY_HT_BBCFG                        0x001 /* BB config */
   8 #define  B43_PHY_HT_BBCFG_RSTCCA                0x4000 /* Reset CCA */
   9 #define  B43_PHY_HT_BBCFG_RSTRX                 0x8000 /* Reset RX */
  10 #define B43_PHY_HT_BANDCTL                      0x009 /* Band control */
  11 #define  B43_PHY_HT_BANDCTL_5GHZ                0x0001 /* Use the 5GHz band */
  12 #define B43_PHY_HT_TABLE_ADDR                   0x072 /* Table address */
  13 #define B43_PHY_HT_TABLE_DATALO                 0x073 /* Table data low */
  14 #define B43_PHY_HT_TABLE_DATAHI                 0x074 /* Table data high */
  15 #define B43_PHY_HT_CLASS_CTL                    0x0B0 /* Classifier control */
  16 #define  B43_PHY_HT_CLASS_CTL_CCK_EN            0x0001 /* CCK enable */
  17 #define  B43_PHY_HT_CLASS_CTL_OFDM_EN           0x0002 /* OFDM enable */
  18 #define  B43_PHY_HT_CLASS_CTL_WAITED_EN         0x0004 /* Waited enable */
  19 #define B43_PHY_HT_IQLOCAL_CMDGCTL              0x0C2   /* I/Q LO cal command G control */
  20 #define B43_PHY_HT_SAMP_CMD                     0x0C3   /* Sample command */
  21 #define  B43_PHY_HT_SAMP_CMD_STOP               0x0002  /* Stop */
  22 #define B43_PHY_HT_SAMP_STAT                    0x0C7   /* Sample status */
  23 #define B43_PHY_HT_BW1                          0x1CE
  24 #define B43_PHY_HT_BW2                          0x1CF
  25 #define B43_PHY_HT_BW3                          0x1D0
  26 #define B43_PHY_HT_BW4                          0x1D1
  27 #define B43_PHY_HT_BW5                          0x1D2
  28 #define B43_PHY_HT_BW6                          0x1D3
  29 #define B43_PHY_HT_TXPCTL_CMD_C1                0x1E7   /* TX power control command */
  30 #define  B43_PHY_HT_TXPCTL_CMD_C1_INIT          0x007F  /* Init */
  31 #define  B43_PHY_HT_TXPCTL_CMD_C1_COEFF         0x2000  /* Power control coefficients */
  32 #define  B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN      0x4000  /* Hardware TX power control enable */
  33 #define  B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN        0x8000  /* TX power control enable */
  34 #define B43_PHY_HT_TXPCTL_CMD_C2                0x222
  35 #define  B43_PHY_HT_TXPCTL_CMD_C2_INIT          0x007F
  36
  37 #define B43_PHY_HT_C1_CLIP1THRES                B43_PHY_OFDM(0x00E)
  38 #define B43_PHY_HT_C2_CLIP1THRES                B43_PHY_OFDM(0x04E)
  39 #define B43_PHY_HT_C3_CLIP1THRES                B43_PHY_OFDM(0x08E)
  40
  41 #define B43_PHY_HT_RF_SEQ_MODE                  B43_PHY_EXTG(0x000)
  42 #define B43_PHY_HT_RF_SEQ_TRIG                  B43_PHY_EXTG(0x003)
  43 #define  B43_PHY_HT_RF_SEQ_TRIG_RX2TX           0x0001 /* RX2TX */
  44 #define  B43_PHY_HT_RF_SEQ_TRIG_TX2RX           0x0002 /* TX2RX */
  45 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGH            0x0004 /* Update gain H */
  46 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGL            0x0008 /* Update gain L */
  47 #define  B43_PHY_HT_RF_SEQ_TRIG_UPGU            0x0010 /* Update gain U */
  48 #define  B43_PHY_HT_RF_SEQ_TRIG_RST2RX          0x0020 /* Reset to RX */
  49 #define B43_PHY_HT_RF_SEQ_STATUS                B43_PHY_EXTG(0x004)
  50 /* Values for the status are the same as for the trigger */
  51
  52 #define B43_PHY_HT_RF_CTL1                      B43_PHY_EXTG(0x010)
  53
  54 #define B43_PHY_HT_RF_CTL_INT_C1                B43_PHY_EXTG(0x04c)
  55 #define B43_PHY_HT_RF_CTL_INT_C2                B43_PHY_EXTG(0x06c)
  56 #define B43_PHY_HT_RF_CTL_INT_C3                B43_PHY_EXTG(0x08c)
  57
  58 #define B43_PHY_HT_AFE_C1_OVER                  B43_PHY_EXTG(0x110)
  59 #define B43_PHY_HT_AFE_C1                       B43_PHY_EXTG(0x111)
  60 #define B43_PHY_HT_AFE_C2_OVER                  B43_PHY_EXTG(0x114)
  61 #define B43_PHY_HT_AFE_C2                       B43_PHY_EXTG(0x115)
  62 #define B43_PHY_HT_AFE_C3_OVER                  B43_PHY_EXTG(0x118)
  63 #define B43_PHY_HT_AFE_C3                       B43_PHY_EXTG(0x119)
  64
  65 #define B43_PHY_HT_TXPCTL_CMD_C3                B43_PHY_EXTG(0x164)
  66 #define  B43_PHY_HT_TXPCTL_CMD_C3_INIT          0x007F
  67
  68 #define B43_PHY_HT_TEST                         B43_PHY_N_BMODE(0x00A)
  69
  70
  71 /* Values for PHY registers used on channel switching */
  72 struct b43_phy_ht_channeltab_e_phy {
  73         u16 bw1;
  74         u16 bw2;
  75         u16 bw3;
  76         u16 bw4;
  77         u16 bw5;
  78         u16 bw6;
  79 };
  80
  81
  82 struct b43_phy_ht {
  83         u16 rf_ctl_int_save[3];
  84
  85         bool tx_pwr_ctl;
  86         u8 tx_pwr_idx[3];
  87
  88         s32 bb_mult_save[3];
  89 };
  90
  91
  92 struct b43_phy_operations;
  93 extern const struct b43_phy_operations b43_phyops_ht;
  94
  95 #endif /* B43_PHY_HT_H_ */