mtd: docg3: add OOB buffer to device structure
[linux-2.6/btrfs-unstable.git] / drivers / mtd / devices / docg3.h
blob397e4616796eb8c4bf2e75f4bf4decccb776ae99
1 /*
2 * Handles the M-Systems DiskOnChip G3 chip
4 * Copyright (C) 2011 Robert Jarzmik
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #ifndef _MTD_DOCG3_H
23 #define _MTD_DOCG3_H
26 * Flash memory areas :
27 * - 0x0000 .. 0x07ff : IPL
28 * - 0x0800 .. 0x0fff : Data area
29 * - 0x1000 .. 0x17ff : Registers
30 * - 0x1800 .. 0x1fff : Unknown
32 #define DOC_IOSPACE_IPL 0x0000
33 #define DOC_IOSPACE_DATA 0x0800
34 #define DOC_IOSPACE_SIZE 0x2000
37 * DOC G3 layout and adressing scheme
38 * A page address for the block "b", plane "P" and page "p":
39 * address = [bbbb bPpp pppp]
42 #define DOC_ADDR_PAGE_MASK 0x3f
43 #define DOC_ADDR_BLOCK_SHIFT 6
44 #define DOC_LAYOUT_NBPLANES 2
45 #define DOC_LAYOUT_PAGES_PER_BLOCK 64
46 #define DOC_LAYOUT_PAGE_SIZE 512
47 #define DOC_LAYOUT_OOB_SIZE 16
48 #define DOC_LAYOUT_WEAR_SIZE 8
49 #define DOC_LAYOUT_PAGE_OOB_SIZE \
50 (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
51 #define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
52 #define DOC_LAYOUT_BLOCK_SIZE \
53 (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
54 #define DOC_ECC_BCH_SIZE 7
55 #define DOC_ECC_BCH_COVERED_BYTES \
56 (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
57 DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)
60 * Blocks distribution
62 #define DOC_LAYOUT_BLOCK_BBT 0
63 #define DOC_LAYOUT_BLOCK_OTP 0
64 #define DOC_LAYOUT_BLOCK_FIRST_DATA 6
66 #define DOC_LAYOUT_PAGE_BBT 4
69 * Extra page OOB (16 bytes wide) layout
71 #define DOC_LAYOUT_OOB_PAGEINFO_OFS 0
72 #define DOC_LAYOUT_OOB_HAMMING_OFS 7
73 #define DOC_LAYOUT_OOB_BCH_OFS 8
74 #define DOC_LAYOUT_OOB_UNUSED_OFS 15
75 #define DOC_LAYOUT_OOB_PAGEINFO_SZ 7
76 #define DOC_LAYOUT_OOB_HAMMING_SZ 1
77 #define DOC_LAYOUT_OOB_BCH_SZ 7
78 #define DOC_LAYOUT_OOB_UNUSED_SZ 1
81 #define DOC_CHIPID_G3 0x200
82 #define DOC_ERASE_MARK 0xaa
83 #define DOC_MAX_NBFLOORS 4
85 * Flash registers
87 #define DOC_CHIPID 0x1000
88 #define DOC_TEST 0x1004
89 #define DOC_BUSLOCK 0x1006
90 #define DOC_ENDIANCONTROL 0x1008
91 #define DOC_DEVICESELECT 0x100a
92 #define DOC_ASICMODE 0x100c
93 #define DOC_CONFIGURATION 0x100e
94 #define DOC_INTERRUPTCONTROL 0x1010
95 #define DOC_READADDRESS 0x101a
96 #define DOC_DATAEND 0x101e
97 #define DOC_INTERRUPTSTATUS 0x1020
99 #define DOC_FLASHSEQUENCE 0x1032
100 #define DOC_FLASHCOMMAND 0x1034
101 #define DOC_FLASHADDRESS 0x1036
102 #define DOC_FLASHCONTROL 0x1038
103 #define DOC_NOP 0x103e
105 #define DOC_ECCCONF0 0x1040
106 #define DOC_ECCCONF1 0x1042
107 #define DOC_ECCPRESET 0x1044
108 #define DOC_HAMMINGPARITY 0x1046
109 #define DOC_BCH_SYNDROM(idx) (0x1048 + (idx << 0))
111 #define DOC_PROTECTION 0x1056
112 #define DOC_DPS0_ADDRLOW 0x1060
113 #define DOC_DPS0_ADDRHIGH 0x1062
114 #define DOC_DPS1_ADDRLOW 0x1064
115 #define DOC_DPS1_ADDRHIGH 0x1066
116 #define DOC_DPS0_STATUS 0x106c
117 #define DOC_DPS1_STATUS 0x106e
119 #define DOC_ASICMODECONFIRM 0x1072
120 #define DOC_CHIPID_INV 0x1074
123 * Flash sequences
124 * A sequence is preset before one or more commands are input to the chip.
126 #define DOC_SEQ_RESET 0x00
127 #define DOC_SEQ_PAGE_SIZE_532 0x03
128 #define DOC_SEQ_SET_MODE 0x09
129 #define DOC_SEQ_READ 0x12
130 #define DOC_SEQ_SET_PLANE1 0x0e
131 #define DOC_SEQ_SET_PLANE2 0x10
132 #define DOC_SEQ_PAGE_SETUP 0x1d
133 #define DOC_SEQ_ERASE 0x27
134 #define DOC_SEQ_PLANES_STATUS 0x31
137 * Flash commands
139 #define DOC_CMD_READ_PLANE1 0x00
140 #define DOC_CMD_SET_ADDR_READ 0x05
141 #define DOC_CMD_READ_ALL_PLANES 0x30
142 #define DOC_CMD_READ_PLANE2 0x50
143 #define DOC_CMD_READ_FLASH 0xe0
144 #define DOC_CMD_PAGE_SIZE_532 0x3c
146 #define DOC_CMD_PROG_BLOCK_ADDR 0x60
147 #define DOC_CMD_PROG_CYCLE1 0x80
148 #define DOC_CMD_PROG_CYCLE2 0x10
149 #define DOC_CMD_PROG_CYCLE3 0x11
150 #define DOC_CMD_ERASECYCLE2 0xd0
151 #define DOC_CMD_READ_STATUS 0x70
152 #define DOC_CMD_PLANES_STATUS 0x71
154 #define DOC_CMD_RELIABLE_MODE 0x22
155 #define DOC_CMD_FAST_MODE 0xa2
157 #define DOC_CMD_RESET 0xff
160 * Flash register : DOC_FLASHCONTROL
162 #define DOC_CTRL_VIOLATION 0x20
163 #define DOC_CTRL_CE 0x10
164 #define DOC_CTRL_UNKNOWN_BITS 0x08
165 #define DOC_CTRL_PROTECTION_ERROR 0x04
166 #define DOC_CTRL_SEQUENCE_ERROR 0x02
167 #define DOC_CTRL_FLASHREADY 0x01
170 * Flash register : DOC_ASICMODE
172 #define DOC_ASICMODE_RESET 0x00
173 #define DOC_ASICMODE_NORMAL 0x01
174 #define DOC_ASICMODE_POWERDOWN 0x02
175 #define DOC_ASICMODE_MDWREN 0x04
176 #define DOC_ASICMODE_BDETCT_RESET 0x08
177 #define DOC_ASICMODE_RSTIN_RESET 0x10
178 #define DOC_ASICMODE_RAM_WE 0x20
181 * Flash register : DOC_ECCCONF0
183 #define DOC_ECCCONF0_READ_MODE 0x8000
184 #define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
185 #define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
186 #define DOC_ECCCONF0_BCH_ENABLE 0x0800
187 #define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
190 * Flash register : DOC_ECCCONF1
192 #define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
193 #define DOC_ECCCONF1_UNKOWN1 0x40
194 #define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
195 #define DOC_ECCCONF1_UNKOWN3 0x10
196 #define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
199 * Flash register : DOC_PROTECTION
201 #define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01
202 #define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02
203 #define DOC_PROTECT_LOCK_INPUT 0x04
204 #define DOC_PROTECT_STICKY_LOCK 0x08
205 #define DOC_PROTECT_PROTECTION_ENABLED 0x10
206 #define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20
207 #define DOC_PROTECT_PROTECTION_ERROR 0x80
210 * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
212 #define DOC_DPS_OTP_PROTECTED 0x01
213 #define DOC_DPS_READ_PROTECTED 0x02
214 #define DOC_DPS_WRITE_PROTECTED 0x04
215 #define DOC_DPS_HW_LOCK_ENABLED 0x08
216 #define DOC_DPS_KEY_OK 0x80
219 * Flash register : DOC_CONFIGURATION
221 #define DOC_CONF_IF_CFG 0x80
222 #define DOC_CONF_MAX_ID_MASK 0x30
223 #define DOC_CONF_VCCQ_3V 0x01
226 * Flash register : DOC_READADDRESS
228 #define DOC_READADDR_INC 0x8000
229 #define DOC_READADDR_ONE_BYTE 0x4000
230 #define DOC_READADDR_ADDR_MASK 0x1fff
233 * Status of erase and write operation
235 #define DOC_PLANES_STATUS_FAIL 0x01
236 #define DOC_PLANES_STATUS_PLANE0_KO 0x02
237 #define DOC_PLANES_STATUS_PLANE1_KO 0x04
240 * struct docg3 - DiskOnChip driver private data
241 * @dev: the device currently under control
242 * @base: mapped IO space
243 * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
244 * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
245 * @bbt: bad block table cache
246 * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next
247 * page_write)
248 * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC
249 * if 0, use all the 16 bytes.
250 * @oob_write_buf: prepared OOB for next page_write
251 * @debugfs_root: debugfs root node
253 struct docg3 {
254 struct device *dev;
255 void __iomem *base;
256 unsigned int device_id:4;
257 unsigned int if_cfg:1;
258 int max_block;
259 u8 *bbt;
260 loff_t oob_write_ofs;
261 int oob_autoecc;
262 u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
263 struct dentry *debugfs_root;
266 #define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
267 #define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
268 #define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
269 #define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
271 #define DEBUGFS_RO_ATTR(name, show_fct) \
272 static int name##_open(struct inode *inode, struct file *file) \
273 { return single_open(file, show_fct, inode->i_private); } \
274 static const struct file_operations name##_fops = { \
275 .owner = THIS_MODULE, \
276 .open = name##_open, \
277 .llseek = seq_lseek, \
278 .read = seq_read, \
279 .release = single_release \
281 #endif
284 * Trace events part
286 #undef TRACE_SYSTEM
287 #define TRACE_SYSTEM docg3
289 #if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
290 #define _MTD_DOCG3_TRACE
292 #include <linux/tracepoint.h>
294 TRACE_EVENT(docg3_io,
295 TP_PROTO(int op, int width, u16 reg, int val),
296 TP_ARGS(op, width, reg, val),
297 TP_STRUCT__entry(
298 __field(int, op)
299 __field(unsigned char, width)
300 __field(u16, reg)
301 __field(int, val)),
302 TP_fast_assign(
303 __entry->op = op;
304 __entry->width = width;
305 __entry->reg = reg;
306 __entry->val = val;),
307 TP_printk("docg3: %s%02d reg=%04x, val=%04x",
308 __entry->op ? "write" : "read", __entry->width,
309 __entry->reg, __entry->val)
311 #endif
313 /* This part must be outside protection */
314 #undef TRACE_INCLUDE_PATH
315 #undef TRACE_INCLUDE_FILE
316 #define TRACE_INCLUDE_PATH .
317 #define TRACE_INCLUDE_FILE docg3
318 #include <trace/define_trace.h>