drivers/pcmcia/sa11xx_base.c

   1 /*======================================================================
   2
   3     Device driver for the PCMCIA control functionality of StrongARM
   4     SA-1100 microprocessors.
   5
   6     The contents of this file are subject to the Mozilla Public
   7     License Version 1.1 (the "License"); you may not use this file
   8     except in compliance with the License. You may obtain a copy of
   9     the License at http://www.mozilla.org/MPL/
  10
  11     Software distributed under the License is distributed on an "AS
  12     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  13     implied. See the License for the specific language governing
  14     rights and limitations under the License.
  15
  16     The initial developer of the original code is John G. Dorsey
  17     <john+@cs.cmu.edu>.  Portions created by John G. Dorsey are
  18     Copyright (C) 1999 John G. Dorsey.  All Rights Reserved.
  19
  20     Alternatively, the contents of this file may be used under the
  21     terms of the GNU Public License version 2 (the "GPL"), in which
  22     case the provisions of the GPL are applicable instead of the
  23     above.  If you wish to allow the use of your version of this file
  24     only under the terms of the GPL and not to allow others to use
  25     your version of this file under the MPL, indicate your decision
  26     by deleting the provisions above and replace them with the notice
  27     and other provisions required by the GPL.  If you do not delete
  28     the provisions above, a recipient may use your version of this
  29     file under either the MPL or the GPL.
  30
  31 ======================================================================*/
  32
  33 #include <linux/module.h>
  34 #include <linux/init.h>
  35 #include <linux/cpufreq.h>
  36 #include <linux/ioport.h>
  37 #include <linux/kernel.h>
  38 #include <linux/spinlock.h>
  39 #include <linux/io.h>
  40 #include <linux/slab.h>
  41
  42 #include <mach/hardware.h>
  43 #include <asm/irq.h>
  44
  45 #include "soc_common.h"
  46 #include "sa11xx_base.h"
  47
  48
  49 /*
  50  * sa1100_pcmcia_default_mecr_timing
  51  * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  52  *
  53  * Calculate MECR clock wait states for given CPU clock
  54  * speed and command wait state. This function can be over-
  55  * written by a board specific version.
  56  *
  57  * The default is to simply calculate the BS values as specified in
  58  * the INTEL SA1100 development manual
  59  * "Expansion Memory (PCMCIA) Configuration Register (MECR)"
  60  * that's section 10.2.5 in _my_ version of the manual ;)
  61  */
  62 static unsigned int
  63 sa1100_pcmcia_default_mecr_timing(struct soc_pcmcia_socket *skt,
  64                                   unsigned int cpu_speed,
  65                                   unsigned int cmd_time)
  66 {
  67         return sa1100_pcmcia_mecr_bs(cmd_time, cpu_speed);
  68 }
  69
  70 /* sa1100_pcmcia_set_mecr()
  71  * ^^^^^^^^^^^^^^^^^^^^^^^^
  72  *
  73  * set MECR value for socket <sock> based on this sockets
  74  * io, mem and attribute space access speed.
  75  * Call board specific BS value calculation to allow boards
  76  * to tweak the BS values.
  77  */
  78 static int
  79 sa1100_pcmcia_set_mecr(struct soc_pcmcia_socket *skt, unsigned int cpu_clock)
  80 {
  81         struct soc_pcmcia_timing timing;
  82         u32 mecr, old_mecr;
  83         unsigned long flags;
  84         unsigned int bs_io, bs_mem, bs_attr;
  85
  86         soc_common_pcmcia_get_timing(skt, &timing);
  87
  88         bs_io = skt->ops->get_timing(skt, cpu_clock, timing.io);
  89         bs_mem = skt->ops->get_timing(skt, cpu_clock, timing.mem);
  90         bs_attr = skt->ops->get_timing(skt, cpu_clock, timing.attr);
  91
  92         local_irq_save(flags);
  93
  94         old_mecr = mecr = MECR;
  95         MECR_FAST_SET(mecr, skt->nr, 0);
  96         MECR_BSIO_SET(mecr, skt->nr, bs_io);
  97         MECR_BSA_SET(mecr, skt->nr, bs_attr);
  98         MECR_BSM_SET(mecr, skt->nr, bs_mem);
  99         if (old_mecr != mecr)
 100                 MECR = mecr;
 101
 102         local_irq_restore(flags);
 103
 104         debug(skt, 2, "FAST %X  BSM %X  BSA %X  BSIO %X\n",
 105               MECR_FAST_GET(mecr, skt->nr),
 106               MECR_BSM_GET(mecr, skt->nr), MECR_BSA_GET(mecr, skt->nr),
 107               MECR_BSIO_GET(mecr, skt->nr));
 108
 109         return 0;
 110 }
 111
 112 #ifdef CONFIG_CPU_FREQ
 113 static int
 114 sa1100_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 115                                unsigned long val,
 116                                struct cpufreq_freqs *freqs)
 117 {
 118         switch (val) {
 119         case CPUFREQ_PRECHANGE:
 120                 if (freqs->new > freqs->old)
 121                         sa1100_pcmcia_set_mecr(skt, freqs->new);
 122                 break;
 123
 124         case CPUFREQ_POSTCHANGE:
 125                 if (freqs->new < freqs->old)
 126                         sa1100_pcmcia_set_mecr(skt, freqs->new);
 127                 break;
 128         }
 129
 130         return 0;
 131 }
 132
 133 #endif
 134
 135 static int
 136 sa1100_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
 137 {
 138         unsigned long clk = clk_get_rate(skt->clk);
 139
 140         return sa1100_pcmcia_set_mecr(skt, clk / 1000);
 141 }
 142
 143 static int
 144 sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf)
 145 {
 146         struct soc_pcmcia_timing timing;
 147         unsigned int clock = clk_get_rate(skt->clk);
 148         unsigned long mecr = MECR;
 149         char *p = buf;
 150
 151         soc_common_pcmcia_get_timing(skt, &timing);
 152
 153         p+=sprintf(p, "I/O      : %u (%u)\n", timing.io,
 154                    sa1100_pcmcia_cmd_time(clock, MECR_BSIO_GET(mecr, skt->nr)));
 155
 156         p+=sprintf(p, "attribute: %u (%u)\n", timing.attr,
 157                    sa1100_pcmcia_cmd_time(clock, MECR_BSA_GET(mecr, skt->nr)));
 158
 159         p+=sprintf(p, "common   : %u (%u)\n", timing.mem,
 160                    sa1100_pcmcia_cmd_time(clock, MECR_BSM_GET(mecr, skt->nr)));
 161
 162         return p - buf;
 163 }
 164
 165 static const char *skt_names[] = {
 166         "PCMCIA socket 0",
 167         "PCMCIA socket 1",
 168 };
 169
 170 #define SKT_DEV_INFO_SIZE(n) \
 171         (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
 172
 173 int sa11xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
 174 {
 175         skt->res_skt.start = _PCMCIA(skt->nr);
 176         skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
 177         skt->res_skt.name = skt_names[skt->nr];
 178         skt->res_skt.flags = IORESOURCE_MEM;
 179
 180         skt->res_io.start = _PCMCIAIO(skt->nr);
 181         skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
 182         skt->res_io.name = "io";
 183         skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 184
 185         skt->res_mem.start = _PCMCIAMem(skt->nr);
 186         skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
 187         skt->res_mem.name = "memory";
 188         skt->res_mem.flags = IORESOURCE_MEM;
 189
 190         skt->res_attr.start = _PCMCIAAttr(skt->nr);
 191         skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
 192         skt->res_attr.name = "attribute";
 193         skt->res_attr.flags = IORESOURCE_MEM;
 194
 195         return soc_pcmcia_add_one(skt);
 196 }
 197 EXPORT_SYMBOL(sa11xx_drv_pcmcia_add_one);
 198
 199 void sa11xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
 200 {
 201         /*
 202          * set default MECR calculation if the board specific
 203          * code did not specify one...
 204          */
 205         if (!ops->get_timing)
 206                 ops->get_timing = sa1100_pcmcia_default_mecr_timing;
 207
 208         /* Provide our SA11x0 specific timing routines. */
 209         ops->set_timing  = sa1100_pcmcia_set_timing;
 210         ops->show_timing = sa1100_pcmcia_show_timing;
 211 #ifdef CONFIG_CPU_FREQ
 212         ops->frequency_change = sa1100_pcmcia_frequency_change;
 213 #endif
 214 }
 215 EXPORT_SYMBOL(sa11xx_drv_pcmcia_ops);
 216
 217 int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
 218                             int first, int nr)
 219 {
 220         struct skt_dev_info *sinfo;
 221         struct soc_pcmcia_socket *skt;
 222         int i, ret = 0;
 223         struct clk *clk;
 224
 225         clk = clk_get(dev, NULL);
 226         if (IS_ERR(clk))
 227                 return PTR_ERR(clk);
 228
 229         sa11xx_drv_pcmcia_ops(ops);
 230
 231         sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
 232         if (!sinfo)
 233                 return -ENOMEM;
 234
 235         sinfo->nskt = nr;
 236         sinfo->clk = clk;
 237
 238         /* Initialize processor specific parameters */
 239         for (i = 0; i < nr; i++) {
 240                 skt = &sinfo->skt[i];
 241
 242                 skt->nr = first + i;
 243                 skt->clk = clk;
 244                 soc_pcmcia_init_one(skt, ops, dev);
 245
 246                 ret = sa11xx_drv_pcmcia_add_one(skt);
 247                 if (ret)
 248                         break;
 249         }
 250
 251         if (ret) {
 252                 while (--i >= 0)
 253                         soc_pcmcia_remove_one(&sinfo->skt[i]);
 254                 clk_put(clk);
 255                 kfree(sinfo);
 256         } else {
 257                 dev_set_drvdata(dev, sinfo);
 258         }
 259
 260         return ret;
 261 }
 262 EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
 263
 264 static int __init sa11xx_pcmcia_init(void)
 265 {
 266         return 0;
 267 }
 268 fs_initcall(sa11xx_pcmcia_init);
 269
 270 static void __exit sa11xx_pcmcia_exit(void) {}
 271
 272 module_exit(sa11xx_pcmcia_exit);
 273
 274 MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
 275 MODULE_DESCRIPTION("Linux PCMCIA Card Services: SA-11xx core socket driver");
 276 MODULE_LICENSE("Dual MPL/GPL");