drivers/watchdog/s3c2410_wdt.c

   1 /* linux/drivers/char/watchdog/s3c2410_wdt.c
   2  *
   3  * Copyright (c) 2004 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C2410 Watchdog Timer Support
   7  *
   8  * Based on, softdog.c by Alan Cox,
   9  *     (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  24 */
  25
  26 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  27
  28 #include <linux/module.h>
  29 #include <linux/moduleparam.h>
  30 #include <linux/types.h>
  31 #include <linux/timer.h>
  32 #include <linux/watchdog.h>
  33 #include <linux/init.h>
  34 #include <linux/platform_device.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/clk.h>
  37 #include <linux/uaccess.h>
  38 #include <linux/io.h>
  39 #include <linux/cpufreq.h>
  40 #include <linux/slab.h>
  41 #include <linux/err.h>
  42 #include <linux/of.h>
  43 #include <linux/mfd/syscon.h>
  44 #include <linux/regmap.h>
  45
  46 #define S3C2410_WTCON           0x00
  47 #define S3C2410_WTDAT           0x04
  48 #define S3C2410_WTCNT           0x08
  49
  50 #define S3C2410_WTCON_RSTEN     (1 << 0)
  51 #define S3C2410_WTCON_INTEN     (1 << 2)
  52 #define S3C2410_WTCON_ENABLE    (1 << 5)
  53
  54 #define S3C2410_WTCON_DIV16     (0 << 3)
  55 #define S3C2410_WTCON_DIV32     (1 << 3)
  56 #define S3C2410_WTCON_DIV64     (2 << 3)
  57 #define S3C2410_WTCON_DIV128    (3 << 3)
  58
  59 #define S3C2410_WTCON_PRESCALE(x)       ((x) << 8)
  60 #define S3C2410_WTCON_PRESCALE_MASK     (0xff << 8)
  61
  62 #define CONFIG_S3C2410_WATCHDOG_ATBOOT          (0)
  63 #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME    (15)
  64
  65 #define EXYNOS5_RST_STAT_REG_OFFSET             0x0404
  66 #define EXYNOS5_WDT_DISABLE_REG_OFFSET          0x0408
  67 #define EXYNOS5_WDT_MASK_RESET_REG_OFFSET       0x040c
  68 #define QUIRK_HAS_PMU_CONFIG                    (1 << 0)
  69 #define QUIRK_HAS_RST_STAT                      (1 << 1)
  70
  71 /* These quirks require that we have a PMU register map */
  72 #define QUIRKS_HAVE_PMUREG                      (QUIRK_HAS_PMU_CONFIG | \
  73                                                  QUIRK_HAS_RST_STAT)
  74
  75 static bool nowayout    = WATCHDOG_NOWAYOUT;
  76 static int tmr_margin;
  77 static int tmr_atboot   = CONFIG_S3C2410_WATCHDOG_ATBOOT;
  78 static int soft_noboot;
  79 static int debug;
  80
  81 module_param(tmr_margin,  int, 0);
  82 module_param(tmr_atboot,  int, 0);
  83 module_param(nowayout,   bool, 0);
  84 module_param(soft_noboot, int, 0);
  85 module_param(debug,       int, 0);
  86
  87 MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
  88                 __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
  89 MODULE_PARM_DESC(tmr_atboot,
  90                 "Watchdog is started at boot time if set to 1, default="
  91                         __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
  92 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
  93                         __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
  94 MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
  95                         "0 to reboot (default 0)");
  96 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
  97
  98 /**
  99  * struct s3c2410_wdt_variant - Per-variant config data
 100  *
 101  * @disable_reg: Offset in pmureg for the register that disables the watchdog
 102  * timer reset functionality.
 103  * @mask_reset_reg: Offset in pmureg for the register that masks the watchdog
 104  * timer reset functionality.
 105  * @mask_bit: Bit number for the watchdog timer in the disable register and the
 106  * mask reset register.
 107  * @rst_stat_reg: Offset in pmureg for the register that has the reset status.
 108  * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
 109  * reset.
 110  * @quirks: A bitfield of quirks.
 111  */
 112
 113 struct s3c2410_wdt_variant {
 114         int disable_reg;
 115         int mask_reset_reg;
 116         int mask_bit;
 117         int rst_stat_reg;
 118         int rst_stat_bit;
 119         u32 quirks;
 120 };
 121
 122 struct s3c2410_wdt {
 123         struct device           *dev;
 124         struct clk              *clock;
 125         void __iomem            *reg_base;
 126         unsigned int            count;
 127         spinlock_t              lock;
 128         unsigned long           wtcon_save;
 129         unsigned long           wtdat_save;
 130         struct watchdog_device  wdt_device;
 131         struct notifier_block   freq_transition;
 132         struct s3c2410_wdt_variant *drv_data;
 133         struct regmap *pmureg;
 134 };
 135
 136 static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
 137         .quirks = 0
 138 };
 139
 140 #ifdef CONFIG_OF
 141 static const struct s3c2410_wdt_variant drv_data_exynos5250  = {
 142         .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
 143         .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
 144         .mask_bit = 20,
 145         .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 146         .rst_stat_bit = 20,
 147         .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
 148 };
 149
 150 static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
 151         .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
 152         .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
 153         .mask_bit = 0,
 154         .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 155         .rst_stat_bit = 9,
 156         .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
 157 };
 158
 159 static const struct of_device_id s3c2410_wdt_match[] = {
 160         { .compatible = "samsung,s3c2410-wdt",
 161           .data = &drv_data_s3c2410 },
 162         { .compatible = "samsung,exynos5250-wdt",
 163           .data = &drv_data_exynos5250 },
 164         { .compatible = "samsung,exynos5420-wdt",
 165           .data = &drv_data_exynos5420 },
 166         {},
 167 };
 168 MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
 169 #endif
 170
 171 static const struct platform_device_id s3c2410_wdt_ids[] = {
 172         {
 173                 .name = "s3c2410-wdt",
 174                 .driver_data = (unsigned long)&drv_data_s3c2410,
 175         },
 176         {}
 177 };
 178 MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);
 179
 180 /* watchdog control routines */
 181
 182 #define DBG(fmt, ...)                                   \
 183 do {                                                    \
 184         if (debug)                                      \
 185                 pr_info(fmt, ##__VA_ARGS__);            \
 186 } while (0)
 187
 188 /* functions */
 189
 190 static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb)
 191 {
 192         return container_of(nb, struct s3c2410_wdt, freq_transition);
 193 }
 194
 195 static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
 196 {
 197         int ret;
 198         u32 mask_val = 1 << wdt->drv_data->mask_bit;
 199         u32 val = 0;
 200
 201         /* No need to do anything if no PMU CONFIG needed */
 202         if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG))
 203                 return 0;
 204
 205         if (mask)
 206                 val = mask_val;
 207
 208         ret = regmap_update_bits(wdt->pmureg,
 209                         wdt->drv_data->disable_reg,
 210                         mask_val, val);
 211         if (ret < 0)
 212                 goto error;
 213
 214         ret = regmap_update_bits(wdt->pmureg,
 215                         wdt->drv_data->mask_reset_reg,
 216                         mask_val, val);
 217  error:
 218         if (ret < 0)
 219                 dev_err(wdt->dev, "failed to update reg(%d)\n", ret);
 220
 221         return ret;
 222 }
 223
 224 static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
 225 {
 226         struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
 227
 228         spin_lock(&wdt->lock);
 229         writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
 230         spin_unlock(&wdt->lock);
 231
 232         return 0;
 233 }
 234
 235 static void __s3c2410wdt_stop(struct s3c2410_wdt *wdt)
 236 {
 237         unsigned long wtcon;
 238
 239         wtcon = readl(wdt->reg_base + S3C2410_WTCON);
 240         wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
 241         writel(wtcon, wdt->reg_base + S3C2410_WTCON);
 242 }
 243
 244 static int s3c2410wdt_stop(struct watchdog_device *wdd)
 245 {
 246         struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
 247
 248         spin_lock(&wdt->lock);
 249         __s3c2410wdt_stop(wdt);
 250         spin_unlock(&wdt->lock);
 251
 252         return 0;
 253 }
 254
 255 static int s3c2410wdt_start(struct watchdog_device *wdd)
 256 {
 257         unsigned long wtcon;
 258         struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
 259
 260         spin_lock(&wdt->lock);
 261
 262         __s3c2410wdt_stop(wdt);
 263
 264         wtcon = readl(wdt->reg_base + S3C2410_WTCON);
 265         wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
 266
 267         if (soft_noboot) {
 268                 wtcon |= S3C2410_WTCON_INTEN;
 269                 wtcon &= ~S3C2410_WTCON_RSTEN;
 270         } else {
 271                 wtcon &= ~S3C2410_WTCON_INTEN;
 272                 wtcon |= S3C2410_WTCON_RSTEN;
 273         }
 274
 275         DBG("%s: count=0x%08x, wtcon=%08lx\n",
 276             __func__, wdt->count, wtcon);
 277
 278         writel(wdt->count, wdt->reg_base + S3C2410_WTDAT);
 279         writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
 280         writel(wtcon, wdt->reg_base + S3C2410_WTCON);
 281         spin_unlock(&wdt->lock);
 282
 283         return 0;
 284 }
 285
 286 static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt)
 287 {
 288         return readl(wdt->reg_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
 289 }
 290
 291 static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeout)
 292 {
 293         struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
 294         unsigned long freq = clk_get_rate(wdt->clock);
 295         unsigned int count;
 296         unsigned int divisor = 1;
 297         unsigned long wtcon;
 298
 299         if (timeout < 1)
 300                 return -EINVAL;
 301
 302         freq = DIV_ROUND_UP(freq, 128);
 303         count = timeout * freq;
 304
 305         DBG("%s: count=%d, timeout=%d, freq=%lu\n",
 306             __func__, count, timeout, freq);
 307
 308         /* if the count is bigger than the watchdog register,
 309            then work out what we need to do (and if) we can
 310            actually make this value
 311         */
 312
 313         if (count >= 0x10000) {
 314                 divisor = DIV_ROUND_UP(count, 0xffff);
 315
 316                 if (divisor > 0x100) {
 317                         dev_err(wdt->dev, "timeout %d too big\n", timeout);
 318                         return -EINVAL;
 319                 }
 320         }
 321
 322         DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
 323             __func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor));
 324
 325         count = DIV_ROUND_UP(count, divisor);
 326         wdt->count = count;
 327
 328         /* update the pre-scaler */
 329         wtcon = readl(wdt->reg_base + S3C2410_WTCON);
 330         wtcon &= ~S3C2410_WTCON_PRESCALE_MASK;
 331         wtcon |= S3C2410_WTCON_PRESCALE(divisor-1);
 332
 333         writel(count, wdt->reg_base + S3C2410_WTDAT);
 334         writel(wtcon, wdt->reg_base + S3C2410_WTCON);
 335
 336         wdd->timeout = (count * divisor) / freq;
 337
 338         return 0;
 339 }
 340
 341 #define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
 342
 343 static const struct watchdog_info s3c2410_wdt_ident = {
 344         .options          =     OPTIONS,
 345         .firmware_version =     0,
 346         .identity         =     "S3C2410 Watchdog",
 347 };
 348
 349 static struct watchdog_ops s3c2410wdt_ops = {
 350         .owner = THIS_MODULE,
 351         .start = s3c2410wdt_start,
 352         .stop = s3c2410wdt_stop,
 353         .ping = s3c2410wdt_keepalive,
 354         .set_timeout = s3c2410wdt_set_heartbeat,
 355 };
 356
 357 static struct watchdog_device s3c2410_wdd = {
 358         .info = &s3c2410_wdt_ident,
 359         .ops = &s3c2410wdt_ops,
 360         .timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME,
 361 };
 362
 363 /* interrupt handler code */
 364
 365 static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
 366 {
 367         struct s3c2410_wdt *wdt = platform_get_drvdata(param);
 368
 369         dev_info(wdt->dev, "watchdog timer expired (irq)\n");
 370
 371         s3c2410wdt_keepalive(&wdt->wdt_device);
 372         return IRQ_HANDLED;
 373 }
 374
 375 #ifdef CONFIG_ARM_S3C24XX_CPUFREQ
 376
 377 static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
 378                                           unsigned long val, void *data)
 379 {
 380         int ret;
 381         struct s3c2410_wdt *wdt = freq_to_wdt(nb);
 382
 383         if (!s3c2410wdt_is_running(wdt))
 384                 goto done;
 385
 386         if (val == CPUFREQ_PRECHANGE) {
 387                 /* To ensure that over the change we don't cause the
 388                  * watchdog to trigger, we perform an keep-alive if
 389                  * the watchdog is running.
 390                  */
 391
 392                 s3c2410wdt_keepalive(&wdt->wdt_device);
 393         } else if (val == CPUFREQ_POSTCHANGE) {
 394                 s3c2410wdt_stop(&wdt->wdt_device);
 395
 396                 ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
 397                                                 wdt->wdt_device.timeout);
 398
 399                 if (ret >= 0)
 400                         s3c2410wdt_start(&wdt->wdt_device);
 401                 else
 402                         goto err;
 403         }
 404
 405 done:
 406         return 0;
 407
 408  err:
 409         dev_err(wdt->dev, "cannot set new value for timeout %d\n",
 410                                 wdt->wdt_device.timeout);
 411         return ret;
 412 }
 413
 414 static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
 415 {
 416         wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
 417
 418         return cpufreq_register_notifier(&wdt->freq_transition,
 419                                          CPUFREQ_TRANSITION_NOTIFIER);
 420 }
 421
 422 static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
 423 {
 424         wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
 425
 426         cpufreq_unregister_notifier(&wdt->freq_transition,
 427                                     CPUFREQ_TRANSITION_NOTIFIER);
 428 }
 429
 430 #else
 431
 432 static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
 433 {
 434         return 0;
 435 }
 436
 437 static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
 438 {
 439 }
 440 #endif
 441
 442 static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
 443 {
 444         unsigned int rst_stat;
 445         int ret;
 446
 447         if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT))
 448                 return 0;
 449
 450         ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat);
 451         if (ret)
 452                 dev_warn(wdt->dev, "Couldn't get RST_STAT register\n");
 453         else if (rst_stat & BIT(wdt->drv_data->rst_stat_bit))
 454                 return WDIOF_CARDRESET;
 455
 456         return 0;
 457 }
 458
 459 /* s3c2410_get_wdt_driver_data */
 460 static inline struct s3c2410_wdt_variant *
 461 get_wdt_drv_data(struct platform_device *pdev)
 462 {
 463         if (pdev->dev.of_node) {
 464                 const struct of_device_id *match;
 465                 match = of_match_node(s3c2410_wdt_match, pdev->dev.of_node);
 466                 return (struct s3c2410_wdt_variant *)match->data;
 467         } else {
 468                 return (struct s3c2410_wdt_variant *)
 469                         platform_get_device_id(pdev)->driver_data;
 470         }
 471 }
 472
 473 static int s3c2410wdt_probe(struct platform_device *pdev)
 474 {
 475         struct device *dev;
 476         struct s3c2410_wdt *wdt;
 477         struct resource *wdt_mem;
 478         struct resource *wdt_irq;
 479         unsigned int wtcon;
 480         int started = 0;
 481         int ret;
 482
 483         DBG("%s: probe=%p\n", __func__, pdev);
 484
 485         dev = &pdev->dev;
 486
 487         wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
 488         if (!wdt)
 489                 return -ENOMEM;
 490
 491         wdt->dev = &pdev->dev;
 492         spin_lock_init(&wdt->lock);
 493         wdt->wdt_device = s3c2410_wdd;
 494
 495         wdt->drv_data = get_wdt_drv_data(pdev);
 496         if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) {
 497                 wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
 498                                                 "samsung,syscon-phandle");
 499                 if (IS_ERR(wdt->pmureg)) {
 500                         dev_err(dev, "syscon regmap lookup failed.\n");
 501                         return PTR_ERR(wdt->pmureg);
 502                 }
 503         }
 504
 505         wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 506         if (wdt_irq == NULL) {
 507                 dev_err(dev, "no irq resource specified\n");
 508                 ret = -ENOENT;
 509                 goto err;
 510         }
 511
 512         /* get the memory region for the watchdog timer */
 513         wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 514         wdt->reg_base = devm_ioremap_resource(dev, wdt_mem);
 515         if (IS_ERR(wdt->reg_base)) {
 516                 ret = PTR_ERR(wdt->reg_base);
 517                 goto err;
 518         }
 519
 520         DBG("probe: mapped reg_base=%p\n", wdt->reg_base);
 521
 522         wdt->clock = devm_clk_get(dev, "watchdog");
 523         if (IS_ERR(wdt->clock)) {
 524                 dev_err(dev, "failed to find watchdog clock source\n");
 525                 ret = PTR_ERR(wdt->clock);
 526                 goto err;
 527         }
 528
 529         clk_prepare_enable(wdt->clock);
 530
 531         ret = s3c2410wdt_cpufreq_register(wdt);
 532         if (ret < 0) {
 533                 dev_err(dev, "failed to register cpufreq\n");
 534                 goto err_clk;
 535         }
 536
 537         watchdog_set_drvdata(&wdt->wdt_device, wdt);
 538
 539         /* see if we can actually set the requested timer margin, and if
 540          * not, try the default value */
 541
 542         watchdog_init_timeout(&wdt->wdt_device, tmr_margin, &pdev->dev);
 543         ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
 544                                         wdt->wdt_device.timeout);
 545         if (ret) {
 546                 started = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
 547                                         CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 548
 549                 if (started == 0)
 550                         dev_info(dev,
 551                            "tmr_margin value out of range, default %d used\n",
 552                                CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 553                 else
 554                         dev_info(dev, "default timer value is out of range, "
 555                                                         "cannot start\n");
 556         }
 557
 558         ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0,
 559                                 pdev->name, pdev);
 560         if (ret != 0) {
 561                 dev_err(dev, "failed to install irq (%d)\n", ret);
 562                 goto err_cpufreq;
 563         }
 564
 565         watchdog_set_nowayout(&wdt->wdt_device, nowayout);
 566
 567         wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
 568
 569         ret = watchdog_register_device(&wdt->wdt_device);
 570         if (ret) {
 571                 dev_err(dev, "cannot register watchdog (%d)\n", ret);
 572                 goto err_cpufreq;
 573         }
 574
 575         ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
 576         if (ret < 0)
 577                 goto err_unregister;
 578
 579         if (tmr_atboot && started == 0) {
 580                 dev_info(dev, "starting watchdog timer\n");
 581                 s3c2410wdt_start(&wdt->wdt_device);
 582         } else if (!tmr_atboot) {
 583                 /* if we're not enabling the watchdog, then ensure it is
 584                  * disabled if it has been left running from the bootloader
 585                  * or other source */
 586
 587                 s3c2410wdt_stop(&wdt->wdt_device);
 588         }
 589
 590         platform_set_drvdata(pdev, wdt);
 591
 592         /* print out a statement of readiness */
 593
 594         wtcon = readl(wdt->reg_base + S3C2410_WTCON);
 595
 596         dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
 597                  (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
 598                  (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
 599                  (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
 600
 601         return 0;
 602
 603  err_unregister:
 604         watchdog_unregister_device(&wdt->wdt_device);
 605
 606  err_cpufreq:
 607         s3c2410wdt_cpufreq_deregister(wdt);
 608
 609  err_clk:
 610         clk_disable_unprepare(wdt->clock);
 611         wdt->clock = NULL;
 612
 613  err:
 614         return ret;
 615 }
 616
 617 static int s3c2410wdt_remove(struct platform_device *dev)
 618 {
 619         int ret;
 620         struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
 621
 622         ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
 623         if (ret < 0)
 624                 return ret;
 625
 626         watchdog_unregister_device(&wdt->wdt_device);
 627
 628         s3c2410wdt_cpufreq_deregister(wdt);
 629
 630         clk_disable_unprepare(wdt->clock);
 631         wdt->clock = NULL;
 632
 633         return 0;
 634 }
 635
 636 static void s3c2410wdt_shutdown(struct platform_device *dev)
 637 {
 638         struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
 639
 640         s3c2410wdt_mask_and_disable_reset(wdt, true);
 641
 642         s3c2410wdt_stop(&wdt->wdt_device);
 643 }
 644
 645 #ifdef CONFIG_PM_SLEEP
 646
 647 static int s3c2410wdt_suspend(struct device *dev)
 648 {
 649         int ret;
 650         struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
 651
 652         /* Save watchdog state, and turn it off. */
 653         wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
 654         wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
 655
 656         ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
 657         if (ret < 0)
 658                 return ret;
 659
 660         /* Note that WTCNT doesn't need to be saved. */
 661         s3c2410wdt_stop(&wdt->wdt_device);
 662
 663         return 0;
 664 }
 665
 666 static int s3c2410wdt_resume(struct device *dev)
 667 {
 668         int ret;
 669         struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
 670
 671         /* Restore watchdog state. */
 672         writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTDAT);
 673         writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
 674         writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
 675
 676         ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
 677         if (ret < 0)
 678                 return ret;
 679
 680         dev_info(dev, "watchdog %sabled\n",
 681                 (wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
 682
 683         return 0;
 684 }
 685 #endif
 686
 687 static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
 688                         s3c2410wdt_resume);
 689
 690 static struct platform_driver s3c2410wdt_driver = {
 691         .probe          = s3c2410wdt_probe,
 692         .remove         = s3c2410wdt_remove,
 693         .shutdown       = s3c2410wdt_shutdown,
 694         .id_table       = s3c2410_wdt_ids,
 695         .driver         = {
 696                 .owner  = THIS_MODULE,
 697                 .name   = "s3c2410-wdt",
 698                 .pm     = &s3c2410wdt_pm_ops,
 699                 .of_match_table = of_match_ptr(s3c2410_wdt_match),
 700         },
 701 };
 702
 703 module_platform_driver(s3c2410wdt_driver);
 704
 705 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
 706               "Dimitry Andric <dimitry.andric@tomtom.com>");
 707 MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
 708 MODULE_LICENSE("GPL");