drivers/clocksource/dw_apb_timer.c

   1 /*
   2  * (C) Copyright 2009 Intel Corporation
   3  * Author: Jacob Pan (jacob.jun.pan@intel.com)
   4  *
   5  * Shared with ARM platforms, Jamie Iles, Picochip 2011
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  *
  11  * Support for the Synopsys DesignWare APB Timers.
  12  */
  13 #include <linux/dw_apb_timer.h>
  14 #include <linux/delay.h>
  15 #include <linux/kernel.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/irq.h>
  18 #include <linux/io.h>
  19 #include <linux/slab.h>
  20
  21 #define APBT_MIN_PERIOD                 4
  22 #define APBT_MIN_DELTA_USEC             200
  23
  24 #define APBTMR_N_LOAD_COUNT             0x00
  25 #define APBTMR_N_CURRENT_VALUE          0x04
  26 #define APBTMR_N_CONTROL                0x08
  27 #define APBTMR_N_EOI                    0x0c
  28 #define APBTMR_N_INT_STATUS             0x10
  29
  30 #define APBTMRS_INT_STATUS              0xa0
  31 #define APBTMRS_EOI                     0xa4
  32 #define APBTMRS_RAW_INT_STATUS          0xa8
  33 #define APBTMRS_COMP_VERSION            0xac
  34
  35 #define APBTMR_CONTROL_ENABLE           (1 << 0)
  36 /* 1: periodic, 0:free running. */
  37 #define APBTMR_CONTROL_MODE_PERIODIC    (1 << 1)
  38 #define APBTMR_CONTROL_INT              (1 << 2)
  39
  40 static inline struct dw_apb_clock_event_device *
  41 ced_to_dw_apb_ced(struct clock_event_device *evt)
  42 {
  43         return container_of(evt, struct dw_apb_clock_event_device, ced);
  44 }
  45
  46 static inline struct dw_apb_clocksource *
  47 clocksource_to_dw_apb_clocksource(struct clocksource *cs)
  48 {
  49         return container_of(cs, struct dw_apb_clocksource, cs);
  50 }
  51
  52 static unsigned long apbt_readl(struct dw_apb_timer *timer, unsigned long offs)
  53 {
  54         return readl(timer->base + offs);
  55 }
  56
  57 static void apbt_writel(struct dw_apb_timer *timer, unsigned long val,
  58                  unsigned long offs)
  59 {
  60         writel(val, timer->base + offs);
  61 }
  62
  63 static void apbt_disable_int(struct dw_apb_timer *timer)
  64 {
  65         unsigned long ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
  66
  67         ctrl |= APBTMR_CONTROL_INT;
  68         apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
  69 }
  70
  71 /**
  72  * dw_apb_clockevent_pause() - stop the clock_event_device from running
  73  *
  74  * @dw_ced:     The APB clock to stop generating events.
  75  */
  76 void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced)
  77 {
  78         disable_irq(dw_ced->timer.irq);
  79         apbt_disable_int(&dw_ced->timer);
  80 }
  81
  82 static void apbt_eoi(struct dw_apb_timer *timer)
  83 {
  84         apbt_readl(timer, APBTMR_N_EOI);
  85 }
  86
  87 static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
  88 {
  89         struct clock_event_device *evt = data;
  90         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
  91
  92         if (!evt->event_handler) {
  93                 pr_info("Spurious APBT timer interrupt %d", irq);
  94                 return IRQ_NONE;
  95         }
  96
  97         if (dw_ced->eoi)
  98                 dw_ced->eoi(&dw_ced->timer);
  99
 100         evt->event_handler(evt);
 101         return IRQ_HANDLED;
 102 }
 103
 104 static void apbt_enable_int(struct dw_apb_timer *timer)
 105 {
 106         unsigned long ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
 107         /* clear pending intr */
 108         apbt_readl(timer, APBTMR_N_EOI);
 109         ctrl &= ~APBTMR_CONTROL_INT;
 110         apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
 111 }
 112
 113 static int apbt_shutdown(struct clock_event_device *evt)
 114 {
 115         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 116         unsigned long ctrl;
 117
 118         pr_debug("%s CPU %d state=shutdown\n", __func__,
 119                  cpumask_first(evt->cpumask));
 120
 121         ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
 122         ctrl &= ~APBTMR_CONTROL_ENABLE;
 123         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 124         return 0;
 125 }
 126
 127 static int apbt_set_oneshot(struct clock_event_device *evt)
 128 {
 129         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 130         unsigned long ctrl;
 131
 132         pr_debug("%s CPU %d state=oneshot\n", __func__,
 133                  cpumask_first(evt->cpumask));
 134
 135         ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
 136         /*
 137          * set free running mode, this mode will let timer reload max
 138          * timeout which will give time (3min on 25MHz clock) to rearm
 139          * the next event, therefore emulate the one-shot mode.
 140          */
 141         ctrl &= ~APBTMR_CONTROL_ENABLE;
 142         ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
 143
 144         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 145         /* write again to set free running mode */
 146         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 147
 148         /*
 149          * DW APB p. 46, load counter with all 1s before starting free
 150          * running mode.
 151          */
 152         apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT);
 153         ctrl &= ~APBTMR_CONTROL_INT;
 154         ctrl |= APBTMR_CONTROL_ENABLE;
 155         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 156         return 0;
 157 }
 158
 159 static int apbt_set_periodic(struct clock_event_device *evt)
 160 {
 161         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 162         unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
 163         unsigned long ctrl;
 164
 165         pr_debug("%s CPU %d state=periodic\n", __func__,
 166                  cpumask_first(evt->cpumask));
 167
 168         ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
 169         ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
 170         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 171         /*
 172          * DW APB p. 46, have to disable timer before load counter,
 173          * may cause sync problem.
 174          */
 175         ctrl &= ~APBTMR_CONTROL_ENABLE;
 176         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 177         udelay(1);
 178         pr_debug("Setting clock period %lu for HZ %d\n", period, HZ);
 179         apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT);
 180         ctrl |= APBTMR_CONTROL_ENABLE;
 181         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 182         return 0;
 183 }
 184
 185 static int apbt_resume(struct clock_event_device *evt)
 186 {
 187         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 188
 189         pr_debug("%s CPU %d state=resume\n", __func__,
 190                  cpumask_first(evt->cpumask));
 191
 192         apbt_enable_int(&dw_ced->timer);
 193         return 0;
 194 }
 195
 196 static int apbt_next_event(unsigned long delta,
 197                            struct clock_event_device *evt)
 198 {
 199         unsigned long ctrl;
 200         struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 201
 202         /* Disable timer */
 203         ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
 204         ctrl &= ~APBTMR_CONTROL_ENABLE;
 205         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 206         /* write new count */
 207         apbt_writel(&dw_ced->timer, delta, APBTMR_N_LOAD_COUNT);
 208         ctrl |= APBTMR_CONTROL_ENABLE;
 209         apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 210
 211         return 0;
 212 }
 213
 214 /**
 215  * dw_apb_clockevent_init() - use an APB timer as a clock_event_device
 216  *
 217  * @cpu:        The CPU the events will be targeted at.
 218  * @name:       The name used for the timer and the IRQ for it.
 219  * @rating:     The rating to give the timer.
 220  * @base:       I/O base for the timer registers.
 221  * @irq:        The interrupt number to use for the timer.
 222  * @freq:       The frequency that the timer counts at.
 223  *
 224  * This creates a clock_event_device for using with the generic clock layer
 225  * but does not start and register it.  This should be done with
 226  * dw_apb_clockevent_register() as the next step.  If this is the first time
 227  * it has been called for a timer then the IRQ will be requested, if not it
 228  * just be enabled to allow CPU hotplug to avoid repeatedly requesting and
 229  * releasing the IRQ.
 230  */
 231 struct dw_apb_clock_event_device *
 232 dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
 233                        void __iomem *base, int irq, unsigned long freq)
 234 {
 235         struct dw_apb_clock_event_device *dw_ced =
 236                 kzalloc(sizeof(*dw_ced), GFP_KERNEL);
 237         int err;
 238
 239         if (!dw_ced)
 240                 return NULL;
 241
 242         dw_ced->timer.base = base;
 243         dw_ced->timer.irq = irq;
 244         dw_ced->timer.freq = freq;
 245
 246         clockevents_calc_mult_shift(&dw_ced->ced, freq, APBT_MIN_PERIOD);
 247         dw_ced->ced.max_delta_ns = clockevent_delta2ns(0x7fffffff,
 248                                                        &dw_ced->ced);
 249         dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
 250         dw_ced->ced.cpumask = cpumask_of(cpu);
 251         dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC |
 252                                 CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
 253         dw_ced->ced.set_state_shutdown = apbt_shutdown;
 254         dw_ced->ced.set_state_periodic = apbt_set_periodic;
 255         dw_ced->ced.set_state_oneshot = apbt_set_oneshot;
 256         dw_ced->ced.tick_resume = apbt_resume;
 257         dw_ced->ced.set_next_event = apbt_next_event;
 258         dw_ced->ced.irq = dw_ced->timer.irq;
 259         dw_ced->ced.rating = rating;
 260         dw_ced->ced.name = name;
 261
 262         dw_ced->irqaction.name          = dw_ced->ced.name;
 263         dw_ced->irqaction.handler       = dw_apb_clockevent_irq;
 264         dw_ced->irqaction.dev_id        = &dw_ced->ced;
 265         dw_ced->irqaction.irq           = irq;
 266         dw_ced->irqaction.flags         = IRQF_TIMER | IRQF_IRQPOLL |
 267                                           IRQF_NOBALANCING;
 268
 269         dw_ced->eoi = apbt_eoi;
 270         err = setup_irq(irq, &dw_ced->irqaction);
 271         if (err) {
 272                 pr_err("failed to request timer irq\n");
 273                 kfree(dw_ced);
 274                 dw_ced = NULL;
 275         }
 276
 277         return dw_ced;
 278 }
 279
 280 /**
 281  * dw_apb_clockevent_resume() - resume a clock that has been paused.
 282  *
 283  * @dw_ced:     The APB clock to resume.
 284  */
 285 void dw_apb_clockevent_resume(struct dw_apb_clock_event_device *dw_ced)
 286 {
 287         enable_irq(dw_ced->timer.irq);
 288 }
 289
 290 /**
 291  * dw_apb_clockevent_stop() - stop the clock_event_device and release the IRQ.
 292  *
 293  * @dw_ced:     The APB clock to stop generating the events.
 294  */
 295 void dw_apb_clockevent_stop(struct dw_apb_clock_event_device *dw_ced)
 296 {
 297         free_irq(dw_ced->timer.irq, &dw_ced->ced);
 298 }
 299
 300 /**
 301  * dw_apb_clockevent_register() - register the clock with the generic layer
 302  *
 303  * @dw_ced:     The APB clock to register as a clock_event_device.
 304  */
 305 void dw_apb_clockevent_register(struct dw_apb_clock_event_device *dw_ced)
 306 {
 307         apbt_writel(&dw_ced->timer, 0, APBTMR_N_CONTROL);
 308         clockevents_register_device(&dw_ced->ced);
 309         apbt_enable_int(&dw_ced->timer);
 310 }
 311
 312 /**
 313  * dw_apb_clocksource_start() - start the clocksource counting.
 314  *
 315  * @dw_cs:      The clocksource to start.
 316  *
 317  * This is used to start the clocksource before registration and can be used
 318  * to enable calibration of timers.
 319  */
 320 void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs)
 321 {
 322         /*
 323          * start count down from 0xffff_ffff. this is done by toggling the
 324          * enable bit then load initial load count to ~0.
 325          */
 326         unsigned long ctrl = apbt_readl(&dw_cs->timer, APBTMR_N_CONTROL);
 327
 328         ctrl &= ~APBTMR_CONTROL_ENABLE;
 329         apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
 330         apbt_writel(&dw_cs->timer, ~0, APBTMR_N_LOAD_COUNT);
 331         /* enable, mask interrupt */
 332         ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
 333         ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT);
 334         apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
 335         /* read it once to get cached counter value initialized */
 336         dw_apb_clocksource_read(dw_cs);
 337 }
 338
 339 static cycle_t __apbt_read_clocksource(struct clocksource *cs)
 340 {
 341         unsigned long current_count;
 342         struct dw_apb_clocksource *dw_cs =
 343                 clocksource_to_dw_apb_clocksource(cs);
 344
 345         current_count = apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
 346
 347         return (cycle_t)~current_count;
 348 }
 349
 350 static void apbt_restart_clocksource(struct clocksource *cs)
 351 {
 352         struct dw_apb_clocksource *dw_cs =
 353                 clocksource_to_dw_apb_clocksource(cs);
 354
 355         dw_apb_clocksource_start(dw_cs);
 356 }
 357
 358 /**
 359  * dw_apb_clocksource_init() - use an APB timer as a clocksource.
 360  *
 361  * @rating:     The rating to give the clocksource.
 362  * @name:       The name for the clocksource.
 363  * @base:       The I/O base for the timer registers.
 364  * @freq:       The frequency that the timer counts at.
 365  *
 366  * This creates a clocksource using an APB timer but does not yet register it
 367  * with the clocksource system.  This should be done with
 368  * dw_apb_clocksource_register() as the next step.
 369  */
 370 struct dw_apb_clocksource *
 371 dw_apb_clocksource_init(unsigned rating, const char *name, void __iomem *base,
 372                         unsigned long freq)
 373 {
 374         struct dw_apb_clocksource *dw_cs = kzalloc(sizeof(*dw_cs), GFP_KERNEL);
 375
 376         if (!dw_cs)
 377                 return NULL;
 378
 379         dw_cs->timer.base = base;
 380         dw_cs->timer.freq = freq;
 381         dw_cs->cs.name = name;
 382         dw_cs->cs.rating = rating;
 383         dw_cs->cs.read = __apbt_read_clocksource;
 384         dw_cs->cs.mask = CLOCKSOURCE_MASK(32);
 385         dw_cs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 386         dw_cs->cs.resume = apbt_restart_clocksource;
 387
 388         return dw_cs;
 389 }
 390
 391 /**
 392  * dw_apb_clocksource_register() - register the APB clocksource.
 393  *
 394  * @dw_cs:      The clocksource to register.
 395  */
 396 void dw_apb_clocksource_register(struct dw_apb_clocksource *dw_cs)
 397 {
 398         clocksource_register_hz(&dw_cs->cs, dw_cs->timer.freq);
 399 }
 400
 401 /**
 402  * dw_apb_clocksource_read() - read the current value of a clocksource.
 403  *
 404  * @dw_cs:      The clocksource to read.
 405  */
 406 cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs)
 407 {
 408         return (cycle_t)~apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
 409 }