?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
efi: Autoload efivars
[linux-2.6/btrfs-unstable.git] / drivers / usb / host / ehci-fsl.c
blobcf2734b532a7ab288d24dd13fd79db364490a748
1 /*
2 * Copyright 2005-2009 MontaVista Software, Inc.
3 * Copyright 2008,2012 Freescale Semiconductor, Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software Foundation,
17 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 *
19 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
20 * by Hunter Wu.
21 * Power Management support by Dave Liu <daveliu@freescale.com>,
22 * Jerry Huang <Chang-Ming.Huang@freescale.com> and
23 * Anton Vorontsov <avorontsov@ru.mvista.com>.
24 */
25
26 #include <linux/kernel.h>
27 #include <linux/types.h>
28 #include <linux/delay.h>
29 #include <linux/pm.h>
30 #include <linux/err.h>
31 #include <linux/platform_device.h>
32 #include <linux/fsl_devices.h>
33
34 #include "ehci-fsl.h"
35
36 /* configure so an HC device and id are always provided */
37 /* always called with process context; sleeping is OK */
38
39 /**
40 * usb_hcd_fsl_probe - initialize FSL-based HCDs
41 * @drvier: Driver to be used for this HCD
42 * @pdev: USB Host Controller being probed
43 * Context: !in_interrupt()
44 *
45 * Allocates basic resources for this USB host controller.
46 *
47 */
48 static int usb_hcd_fsl_probe(const struct hc_driver *driver,
49 struct platform_device *pdev)
50 {
51 struct fsl_usb2_platform_data *pdata;
52 struct usb_hcd *hcd;
53 struct resource *res;
54 int irq;
55 int retval;
56
57 pr_debug("initializing FSL-SOC USB Controller\n");
58
59 /* Need platform data for setup */
60 pdata = dev_get_platdata(&pdev->dev);
61 if (!pdata) {
62 dev_err(&pdev->dev,
63 "No platform data for %s.\n", dev_name(&pdev->dev));
64 return -ENODEV;
65 }
66
67 /*
68 * This is a host mode driver, verify that we're supposed to be
69 * in host mode.
70 */
71 if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
72 (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
73 (pdata->operating_mode == FSL_USB2_DR_OTG))) {
74 dev_err(&pdev->dev,
75 "Non Host Mode configured for %s. Wrong driver linked.\n",
76 dev_name(&pdev->dev));
77 return -ENODEV;
78 }
79
80 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
81 if (!res) {
82 dev_err(&pdev->dev,
83 "Found HC with no IRQ. Check %s setup!\n",
84 dev_name(&pdev->dev));
85 return -ENODEV;
86 }
87 irq = res->start;
88
89 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
90 if (!hcd) {
91 retval = -ENOMEM;
92 goto err1;
93 }
94
95 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
96 if (!res) {
97 dev_err(&pdev->dev,
98 "Found HC with no register addr. Check %s setup!\n",
99 dev_name(&pdev->dev));
100 retval = -ENODEV;
101 goto err2;
102 }
103 hcd->rsrc_start = res->start;
104 hcd->rsrc_len = resource_size(res);
105 hcd->regs = devm_ioremap_resource(&pdev->dev, res);
106 if (IS_ERR(hcd->regs)) {
107 retval = PTR_ERR(hcd->regs);
108 goto err2;
109 }
110
111 pdata->regs = hcd->regs;
112
113 if (pdata->power_budget)
114 hcd->power_budget = pdata->power_budget;
115
116 /*
117 * do platform specific init: check the clock, grab/config pins, etc.
118 */
119 if (pdata->init && pdata->init(pdev)) {
120 retval = -ENODEV;
121 goto err2;
122 }
123
124 /* Enable USB controller, 83xx or 8536 */
125 if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
126 setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
127
128 /* Don't need to set host mode here. It will be done by tdi_reset() */
129
130 retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
131 if (retval != 0)
132 goto err2;
133 device_wakeup_enable(hcd->self.controller);
134
135 #ifdef CONFIG_USB_OTG
136 if (pdata->operating_mode == FSL_USB2_DR_OTG) {
137 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
138
139 hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2);
140 dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
141 hcd, ehci, hcd->phy);
142
143 if (!IS_ERR_OR_NULL(hcd->phy)) {
144 retval = otg_set_host(hcd->phy->otg,
145 &ehci_to_hcd(ehci)->self);
146 if (retval) {
147 usb_put_phy(hcd->phy);
148 goto err2;
149 }
150 } else {
151 dev_err(&pdev->dev, "can't find phy\n");
152 retval = -ENODEV;
153 goto err2;
154 }
155 }
156 #endif
157 return retval;
158
159 err2:
160 usb_put_hcd(hcd);
161 err1:
162 dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
163 if (pdata->exit)
164 pdata->exit(pdev);
165 return retval;
166 }
167
168 /* may be called without controller electrically present */
169 /* may be called with controller, bus, and devices active */
170
171 /**
172 * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
173 * @dev: USB Host Controller being removed
174 * Context: !in_interrupt()
175 *
176 * Reverses the effect of usb_hcd_fsl_probe().
177 *
178 */
179 static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
180 struct platform_device *pdev)
181 {
182 struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
183
184 if (!IS_ERR_OR_NULL(hcd->phy)) {
185 otg_set_host(hcd->phy->otg, NULL);
186 usb_put_phy(hcd->phy);
187 }
188
189 usb_remove_hcd(hcd);
190
191 /*
192 * do platform specific un-initialization:
193 * release iomux pins, disable clock, etc.
194 */
195 if (pdata->exit)
196 pdata->exit(pdev);
197 usb_put_hcd(hcd);
198 }
199
200 static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
201 enum fsl_usb2_phy_modes phy_mode,
202 unsigned int port_offset)
203 {
204 u32 portsc;
205 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
206 void __iomem *non_ehci = hcd->regs;
207 struct device *dev = hcd->self.controller;
208 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
209
210 if (pdata->controller_ver < 0) {
211 dev_warn(hcd->self.controller, "Could not get controller version\n");
212 return -ENODEV;
213 }
214
215 portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
216 portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
217
218 switch (phy_mode) {
219 case FSL_USB2_PHY_ULPI:
220 if (pdata->have_sysif_regs && pdata->controller_ver) {
221 /* controller version 1.6 or above */
222 clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
223 setbits32(non_ehci + FSL_SOC_USB_CTRL,
224 ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
225 }
226 portsc |= PORT_PTS_ULPI;
227 break;
228 case FSL_USB2_PHY_SERIAL:
229 portsc |= PORT_PTS_SERIAL;
230 break;
231 case FSL_USB2_PHY_UTMI_WIDE:
232 portsc |= PORT_PTS_PTW;
233 /* fall through */
234 case FSL_USB2_PHY_UTMI:
235 if (pdata->have_sysif_regs && pdata->controller_ver) {
236 /* controller version 1.6 or above */
237 setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
238 mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
239 become stable - 10ms*/
240 }
241 /* enable UTMI PHY */
242 if (pdata->have_sysif_regs)
243 setbits32(non_ehci + FSL_SOC_USB_CTRL,
244 CTRL_UTMI_PHY_EN);
245 portsc |= PORT_PTS_UTMI;
246 break;
247 case FSL_USB2_PHY_NONE:
248 break;
249 }
250
251 if (pdata->have_sysif_regs &&
252 pdata->controller_ver > FSL_USB_VER_1_6 &&
253 (phy_mode == FSL_USB2_PHY_ULPI)) {
254 /* check PHY_CLK_VALID to get phy clk valid */
255 if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
256 PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) ||
257 in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) {
258 dev_warn(hcd->self.controller, "USB PHY clock invalid\n");
259 return -EINVAL;
260 }
261 }
262
263 ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
264
265 if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
266 setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
267
268 return 0;
269 }
270
271 static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
272 {
273 struct usb_hcd *hcd = ehci_to_hcd(ehci);
274 struct fsl_usb2_platform_data *pdata;
275 void __iomem *non_ehci = hcd->regs;
276
277 pdata = dev_get_platdata(hcd->self.controller);
278
279 if (pdata->have_sysif_regs) {
280 /*
281 * Turn on cache snooping hardware, since some PowerPC platforms
282 * wholly rely on hardware to deal with cache coherent
283 */
284
285 /* Setup Snooping for all the 4GB space */
286 /* SNOOP1 starts from 0x0, size 2G */
287 out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
288 /* SNOOP2 starts from 0x80000000, size 2G */
289 out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
290 }
291
292 if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
293 (pdata->operating_mode == FSL_USB2_DR_OTG))
294 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
295 return -EINVAL;
296
297 if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
298 unsigned int chip, rev, svr;
299
300 svr = mfspr(SPRN_SVR);
301 chip = svr >> 16;
302 rev = (svr >> 4) & 0xf;
303
304 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
305 if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
306 ehci->has_fsl_port_bug = 1;
307
308 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
309 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
310 return -EINVAL;
311
312 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
313 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
314 return -EINVAL;
315 }
316
317 if (pdata->have_sysif_regs) {
318 #ifdef CONFIG_FSL_SOC_BOOKE
319 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
320 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
321 #else
322 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
323 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
324 #endif
325 out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
326 }
327
328 return 0;
329 }
330
331 /* called after powerup, by probe or system-pm "wakeup" */
332 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
333 {
334 if (ehci_fsl_usb_setup(ehci))
335 return -EINVAL;
336
337 return 0;
338 }
339
340 /* called during probe() after chip reset completes */
341 static int ehci_fsl_setup(struct usb_hcd *hcd)
342 {
343 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
344 int retval;
345 struct fsl_usb2_platform_data *pdata;
346 struct device *dev;
347
348 dev = hcd->self.controller;
349 pdata = dev_get_platdata(hcd->self.controller);
350 ehci->big_endian_desc = pdata->big_endian_desc;
351 ehci->big_endian_mmio = pdata->big_endian_mmio;
352
353 /* EHCI registers start at offset 0x100 */
354 ehci->caps = hcd->regs + 0x100;
355
356 #ifdef CONFIG_PPC_83xx
357 /*
358 * Deal with MPC834X that need port power to be cycled after the power
359 * fault condition is removed. Otherwise the state machine does not
360 * reflect PORTSC[CSC] correctly.
361 */
362 ehci->need_oc_pp_cycle = 1;
363 #endif
364
365 hcd->has_tt = 1;
366
367 retval = ehci_setup(hcd);
368 if (retval)
369 return retval;
370
371 if (of_device_is_compatible(dev->parent->of_node,
372 "fsl,mpc5121-usb2-dr")) {
373 /*
374 * set SBUSCFG:AHBBRST so that control msgs don't
375 * fail when doing heavy PATA writes.
376 */
377 ehci_writel(ehci, SBUSCFG_INCR8,
378 hcd->regs + FSL_SOC_USB_SBUSCFG);
379 }
380
381 retval = ehci_fsl_reinit(ehci);
382 return retval;
383 }
384
385 struct ehci_fsl {
386 struct ehci_hcd ehci;
387
388 #ifdef CONFIG_PM
389 /* Saved USB PHY settings, need to restore after deep sleep. */
390 u32 usb_ctrl;
391 #endif
392 };
393
394 #ifdef CONFIG_PM
395
396 #ifdef CONFIG_PPC_MPC512x
397 static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
398 {
399 struct usb_hcd *hcd = dev_get_drvdata(dev);
400 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
401 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
402 u32 tmp;
403
404 #ifdef CONFIG_DYNAMIC_DEBUG
405 u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
406 mode &= USBMODE_CM_MASK;
407 tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
408
409 dev_dbg(dev, "suspend=%d already_suspended=%d "
410 "mode=%d usbcmd %08x\n", pdata->suspended,
411 pdata->already_suspended, mode, tmp);
412 #endif
413
414 /*
415 * If the controller is already suspended, then this must be a
416 * PM suspend. Remember this fact, so that we will leave the
417 * controller suspended at PM resume time.
418 */
419 if (pdata->suspended) {
420 dev_dbg(dev, "already suspended, leaving early\n");
421 pdata->already_suspended = 1;
422 return 0;
423 }
424
425 dev_dbg(dev, "suspending...\n");
426
427 ehci->rh_state = EHCI_RH_SUSPENDED;
428 dev->power.power_state = PMSG_SUSPEND;
429
430 /* ignore non-host interrupts */
431 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
432
433 /* stop the controller */
434 tmp = ehci_readl(ehci, &ehci->regs->command);
435 tmp &= ~CMD_RUN;
436 ehci_writel(ehci, tmp, &ehci->regs->command);
437
438 /* save EHCI registers */
439 pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
440 pdata->pm_command &= ~CMD_RUN;
441 pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
442 pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
443 pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
444 pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
445 pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
446 pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
447 pdata->pm_configured_flag =
448 ehci_readl(ehci, &ehci->regs->configured_flag);
449 pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
450 pdata->pm_usbgenctrl = ehci_readl(ehci,
451 hcd->regs + FSL_SOC_USB_USBGENCTRL);
452
453 /* clear the W1C bits */
454 pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
455
456 pdata->suspended = 1;
457
458 /* clear PP to cut power to the port */
459 tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
460 tmp &= ~PORT_POWER;
461 ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
462
463 return 0;
464 }
465
466 static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
467 {
468 struct usb_hcd *hcd = dev_get_drvdata(dev);
469 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
470 struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
471 u32 tmp;
472
473 dev_dbg(dev, "suspend=%d already_suspended=%d\n",
474 pdata->suspended, pdata->already_suspended);
475
476 /*
477 * If the controller was already suspended at suspend time,
478 * then don't resume it now.
479 */
480 if (pdata->already_suspended) {
481 dev_dbg(dev, "already suspended, leaving early\n");
482 pdata->already_suspended = 0;
483 return 0;
484 }
485
486 if (!pdata->suspended) {
487 dev_dbg(dev, "not suspended, leaving early\n");
488 return 0;
489 }
490
491 pdata->suspended = 0;
492
493 dev_dbg(dev, "resuming...\n");
494
495 /* set host mode */
496 tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
497 ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
498
499 ehci_writel(ehci, pdata->pm_usbgenctrl,
500 hcd->regs + FSL_SOC_USB_USBGENCTRL);
501 ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
502 hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
503
504 ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
505
506 /* restore EHCI registers */
507 ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
508 ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
509 ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
510 ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
511 ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
512 ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
513 ehci_writel(ehci, pdata->pm_configured_flag,
514 &ehci->regs->configured_flag);
515 ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
516
517 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
518 ehci->rh_state = EHCI_RH_RUNNING;
519 dev->power.power_state = PMSG_ON;
520
521 tmp = ehci_readl(ehci, &ehci->regs->command);
522 tmp |= CMD_RUN;
523 ehci_writel(ehci, tmp, &ehci->regs->command);
524
525 usb_hcd_resume_root_hub(hcd);
526
527 return 0;
528 }
529 #else
530 static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
531 {
532 return 0;
533 }
534
535 static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
536 {
537 return 0;
538 }
539 #endif /* CONFIG_PPC_MPC512x */
540
541 static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
542 {
543 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
544
545 return container_of(ehci, struct ehci_fsl, ehci);
546 }
547
548 static int ehci_fsl_drv_suspend(struct device *dev)
549 {
550 struct usb_hcd *hcd = dev_get_drvdata(dev);
551 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
552 void __iomem *non_ehci = hcd->regs;
553
554 if (of_device_is_compatible(dev->parent->of_node,
555 "fsl,mpc5121-usb2-dr")) {
556 return ehci_fsl_mpc512x_drv_suspend(dev);
557 }
558
559 ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
560 device_may_wakeup(dev));
561 if (!fsl_deep_sleep())
562 return 0;
563
564 ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL);
565 return 0;
566 }
567
568 static int ehci_fsl_drv_resume(struct device *dev)
569 {
570 struct usb_hcd *hcd = dev_get_drvdata(dev);
571 struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
572 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
573 void __iomem *non_ehci = hcd->regs;
574
575 if (of_device_is_compatible(dev->parent->of_node,
576 "fsl,mpc5121-usb2-dr")) {
577 return ehci_fsl_mpc512x_drv_resume(dev);
578 }
579
580 ehci_prepare_ports_for_controller_resume(ehci);
581 if (!fsl_deep_sleep())
582 return 0;
583
584 usb_root_hub_lost_power(hcd->self.root_hub);
585
586 /* Restore USB PHY settings and enable the controller. */
587 out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl);
588
589 ehci_reset(ehci);
590 ehci_fsl_reinit(ehci);
591
592 return 0;
593 }
594
595 static int ehci_fsl_drv_restore(struct device *dev)
596 {
597 struct usb_hcd *hcd = dev_get_drvdata(dev);
598
599 usb_root_hub_lost_power(hcd->self.root_hub);
600 return 0;
601 }
602
603 static struct dev_pm_ops ehci_fsl_pm_ops = {
604 .suspend = ehci_fsl_drv_suspend,
605 .resume = ehci_fsl_drv_resume,
606 .restore = ehci_fsl_drv_restore,
607 };
608
609 #define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
610 #else
611 #define EHCI_FSL_PM_OPS NULL
612 #endif /* CONFIG_PM */
613
614 #ifdef CONFIG_USB_OTG
615 static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
616 {
617 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
618 u32 status;
619
620 if (!port)
621 return -EINVAL;
622
623 port--;
624
625 /* start port reset before HNP protocol time out */
626 status = readl(&ehci->regs->port_status[port]);
627 if (!(status & PORT_CONNECT))
628 return -ENODEV;
629
630 /* khubd will finish the reset later */
631 if (ehci_is_TDI(ehci)) {
632 writel(PORT_RESET |
633 (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
634 &ehci->regs->port_status[port]);
635 } else {
636 writel(PORT_RESET, &ehci->regs->port_status[port]);
637 }
638
639 return 0;
640 }
641 #else
642 #define ehci_start_port_reset NULL
643 #endif /* CONFIG_USB_OTG */
644
645
646 static const struct hc_driver ehci_fsl_hc_driver = {
647 .description = hcd_name,
648 .product_desc = "Freescale On-Chip EHCI Host Controller",
649 .hcd_priv_size = sizeof(struct ehci_fsl),
650
651 /*
652 * generic hardware linkage
653 */
654 .irq = ehci_irq,
655 .flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
656
657 /*
658 * basic lifecycle operations
659 */
660 .reset = ehci_fsl_setup,
661 .start = ehci_run,
662 .stop = ehci_stop,
663 .shutdown = ehci_shutdown,
664
665 /*
666 * managing i/o requests and associated device resources
667 */
668 .urb_enqueue = ehci_urb_enqueue,
669 .urb_dequeue = ehci_urb_dequeue,
670 .endpoint_disable = ehci_endpoint_disable,
671 .endpoint_reset = ehci_endpoint_reset,
672
673 /*
674 * scheduling support
675 */
676 .get_frame_number = ehci_get_frame,
677
678 /*
679 * root hub support
680 */
681 .hub_status_data = ehci_hub_status_data,
682 .hub_control = ehci_hub_control,
683 .bus_suspend = ehci_bus_suspend,
684 .bus_resume = ehci_bus_resume,
685 .start_port_reset = ehci_start_port_reset,
686 .relinquish_port = ehci_relinquish_port,
687 .port_handed_over = ehci_port_handed_over,
688
689 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
690 };
691
692 static int ehci_fsl_drv_probe(struct platform_device *pdev)
693 {
694 if (usb_disabled())
695 return -ENODEV;
696
697 /* FIXME we only want one one probe() not two */
698 return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
699 }
700
701 static int ehci_fsl_drv_remove(struct platform_device *pdev)
702 {
703 struct usb_hcd *hcd = platform_get_drvdata(pdev);
704
705 /* FIXME we only want one one remove() not two */
706 usb_hcd_fsl_remove(hcd, pdev);
707 return 0;
708 }
709
710 MODULE_ALIAS("platform:fsl-ehci");
711
712 static struct platform_driver ehci_fsl_driver = {
713 .probe = ehci_fsl_drv_probe,
714 .remove = ehci_fsl_drv_remove,
715 .shutdown = usb_hcd_platform_shutdown,
716 .driver = {
717 .name = "fsl-ehci",
718 .owner = THIS_MODULE,
719 .pm = EHCI_FSL_PM_OPS,
720 },
721 };
(deprecated) Btrfs devel tree