2 * sd.c Copyright (C) 1992 Drew Eckhardt
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
5 * Linux scsi disk driver
6 * Initial versions: Drew Eckhardt
7 * Subsequent revisions: Eric Youngdale
8 * Modification history:
9 * - Drew Eckhardt <drew@colorado.edu> original
10 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
11 * outstanding request, and other enhancements.
12 * Support loadable low-level scsi drivers.
13 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
14 * eight major numbers.
15 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
16 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
17 * sd_init and cleanups.
18 * - Alex Davis <letmein@erols.com> Fix problem where partition info
19 * not being read in sd_open. Fix problem where removable media
20 * could be ejected after sd_open.
21 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
22 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
23 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
24 * Support 32k/1M disks.
26 * Logging policy (needs CONFIG_SCSI_LOGGING defined):
27 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
28 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
29 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1
30 * - entering other commands: SCSI_LOG_HLQUEUE level 3
31 * Note: when the logging level is set by the user, it must be greater
32 * than the level indicated above to trigger output.
35 #include <linux/module.h>
37 #include <linux/kernel.h>
39 #include <linux/bio.h>
40 #include <linux/genhd.h>
41 #include <linux/hdreg.h>
42 #include <linux/errno.h>
43 #include <linux/idr.h>
44 #include <linux/interrupt.h>
45 #include <linux/init.h>
46 #include <linux/blkdev.h>
47 #include <linux/blkpg.h>
48 #include <linux/delay.h>
49 #include <linux/mutex.h>
50 #include <linux/string_helpers.h>
51 #include <linux/async.h>
52 #include <linux/slab.h>
53 #include <linux/pm_runtime.h>
54 #include <asm/uaccess.h>
55 #include <asm/unaligned.h>
57 #include <scsi/scsi.h>
58 #include <scsi/scsi_cmnd.h>
59 #include <scsi/scsi_dbg.h>
60 #include <scsi/scsi_device.h>
61 #include <scsi/scsi_driver.h>
62 #include <scsi/scsi_eh.h>
63 #include <scsi/scsi_host.h>
64 #include <scsi/scsi_ioctl.h>
65 #include <scsi/scsicam.h>
68 #include "scsi_priv.h"
69 #include "scsi_logging.h"
71 MODULE_AUTHOR("Eric Youngdale");
72 MODULE_DESCRIPTION("SCSI disk (sd) driver");
73 MODULE_LICENSE("GPL");
75 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR
);
76 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR
);
77 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR
);
78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR
);
79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR
);
80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR
);
81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR
);
82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR
);
83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR
);
84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR
);
85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR
);
86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR
);
87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR
);
88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR
);
89 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR
);
90 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR
);
91 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK
);
92 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD
);
93 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC
);
95 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
101 static void sd_config_discard(struct scsi_disk
*, unsigned int);
102 static void sd_config_write_same(struct scsi_disk
*);
103 static int sd_revalidate_disk(struct gendisk
*);
104 static void sd_unlock_native_capacity(struct gendisk
*disk
);
105 static int sd_probe(struct device
*);
106 static int sd_remove(struct device
*);
107 static void sd_shutdown(struct device
*);
108 static int sd_suspend_system(struct device
*);
109 static int sd_suspend_runtime(struct device
*);
110 static int sd_resume(struct device
*);
111 static void sd_rescan(struct device
*);
112 static int sd_init_command(struct scsi_cmnd
*SCpnt
);
113 static void sd_uninit_command(struct scsi_cmnd
*SCpnt
);
114 static int sd_done(struct scsi_cmnd
*);
115 static int sd_eh_action(struct scsi_cmnd
*, int);
116 static void sd_read_capacity(struct scsi_disk
*sdkp
, unsigned char *buffer
);
117 static void scsi_disk_release(struct device
*cdev
);
118 static void sd_print_sense_hdr(struct scsi_disk
*, struct scsi_sense_hdr
*);
119 static void sd_print_result(const struct scsi_disk
*, const char *, int);
121 static DEFINE_SPINLOCK(sd_index_lock
);
122 static DEFINE_IDA(sd_index_ida
);
124 /* This semaphore is used to mediate the 0->1 reference get in the
125 * face of object destruction (i.e. we can't allow a get on an
126 * object after last put) */
127 static DEFINE_MUTEX(sd_ref_mutex
);
129 static struct kmem_cache
*sd_cdb_cache
;
130 static mempool_t
*sd_cdb_pool
;
132 static const char *sd_cache_types
[] = {
133 "write through", "none", "write back",
134 "write back, no read (daft)"
137 static void sd_set_flush_flag(struct scsi_disk
*sdkp
)
147 blk_queue_flush(sdkp
->disk
->queue
, flush
);
151 cache_type_store(struct device
*dev
, struct device_attribute
*attr
,
152 const char *buf
, size_t count
)
154 int i
, ct
= -1, rcd
, wce
, sp
;
155 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
156 struct scsi_device
*sdp
= sdkp
->device
;
159 struct scsi_mode_data data
;
160 struct scsi_sense_hdr sshdr
;
161 static const char temp
[] = "temporary ";
164 if (sdp
->type
!= TYPE_DISK
)
165 /* no cache control on RBC devices; theoretically they
166 * can do it, but there's probably so many exceptions
167 * it's not worth the risk */
170 if (strncmp(buf
, temp
, sizeof(temp
) - 1) == 0) {
171 buf
+= sizeof(temp
) - 1;
172 sdkp
->cache_override
= 1;
174 sdkp
->cache_override
= 0;
177 for (i
= 0; i
< ARRAY_SIZE(sd_cache_types
); i
++) {
178 len
= strlen(sd_cache_types
[i
]);
179 if (strncmp(sd_cache_types
[i
], buf
, len
) == 0 &&
187 rcd
= ct
& 0x01 ? 1 : 0;
188 wce
= (ct
& 0x02) && !sdkp
->write_prot
? 1 : 0;
190 if (sdkp
->cache_override
) {
193 sd_set_flush_flag(sdkp
);
197 if (scsi_mode_sense(sdp
, 0x08, 8, buffer
, sizeof(buffer
), SD_TIMEOUT
,
198 SD_MAX_RETRIES
, &data
, NULL
))
200 len
= min_t(size_t, sizeof(buffer
), data
.length
- data
.header_length
-
201 data
.block_descriptor_length
);
202 buffer_data
= buffer
+ data
.header_length
+
203 data
.block_descriptor_length
;
204 buffer_data
[2] &= ~0x05;
205 buffer_data
[2] |= wce
<< 2 | rcd
;
206 sp
= buffer_data
[0] & 0x80 ? 1 : 0;
208 if (scsi_mode_select(sdp
, 1, sp
, 8, buffer_data
, len
, SD_TIMEOUT
,
209 SD_MAX_RETRIES
, &data
, &sshdr
)) {
210 if (scsi_sense_valid(&sshdr
))
211 sd_print_sense_hdr(sdkp
, &sshdr
);
214 revalidate_disk(sdkp
->disk
);
219 manage_start_stop_show(struct device
*dev
, struct device_attribute
*attr
,
222 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
223 struct scsi_device
*sdp
= sdkp
->device
;
225 return snprintf(buf
, 20, "%u\n", sdp
->manage_start_stop
);
229 manage_start_stop_store(struct device
*dev
, struct device_attribute
*attr
,
230 const char *buf
, size_t count
)
232 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
233 struct scsi_device
*sdp
= sdkp
->device
;
235 if (!capable(CAP_SYS_ADMIN
))
238 sdp
->manage_start_stop
= simple_strtoul(buf
, NULL
, 10);
242 static DEVICE_ATTR_RW(manage_start_stop
);
245 allow_restart_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
247 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
249 return snprintf(buf
, 40, "%d\n", sdkp
->device
->allow_restart
);
253 allow_restart_store(struct device
*dev
, struct device_attribute
*attr
,
254 const char *buf
, size_t count
)
256 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
257 struct scsi_device
*sdp
= sdkp
->device
;
259 if (!capable(CAP_SYS_ADMIN
))
262 if (sdp
->type
!= TYPE_DISK
)
265 sdp
->allow_restart
= simple_strtoul(buf
, NULL
, 10);
269 static DEVICE_ATTR_RW(allow_restart
);
272 cache_type_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
274 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
275 int ct
= sdkp
->RCD
+ 2*sdkp
->WCE
;
277 return snprintf(buf
, 40, "%s\n", sd_cache_types
[ct
]);
279 static DEVICE_ATTR_RW(cache_type
);
282 FUA_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
284 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
286 return snprintf(buf
, 20, "%u\n", sdkp
->DPOFUA
);
288 static DEVICE_ATTR_RO(FUA
);
291 protection_type_show(struct device
*dev
, struct device_attribute
*attr
,
294 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
296 return snprintf(buf
, 20, "%u\n", sdkp
->protection_type
);
300 protection_type_store(struct device
*dev
, struct device_attribute
*attr
,
301 const char *buf
, size_t count
)
303 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
307 if (!capable(CAP_SYS_ADMIN
))
310 err
= kstrtouint(buf
, 10, &val
);
315 if (val
>= 0 && val
<= SD_DIF_TYPE3_PROTECTION
)
316 sdkp
->protection_type
= val
;
320 static DEVICE_ATTR_RW(protection_type
);
323 protection_mode_show(struct device
*dev
, struct device_attribute
*attr
,
326 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
327 struct scsi_device
*sdp
= sdkp
->device
;
328 unsigned int dif
, dix
;
330 dif
= scsi_host_dif_capable(sdp
->host
, sdkp
->protection_type
);
331 dix
= scsi_host_dix_capable(sdp
->host
, sdkp
->protection_type
);
333 if (!dix
&& scsi_host_dix_capable(sdp
->host
, SD_DIF_TYPE0_PROTECTION
)) {
339 return snprintf(buf
, 20, "none\n");
341 return snprintf(buf
, 20, "%s%u\n", dix
? "dix" : "dif", dif
);
343 static DEVICE_ATTR_RO(protection_mode
);
346 app_tag_own_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
348 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
350 return snprintf(buf
, 20, "%u\n", sdkp
->ATO
);
352 static DEVICE_ATTR_RO(app_tag_own
);
355 thin_provisioning_show(struct device
*dev
, struct device_attribute
*attr
,
358 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
360 return snprintf(buf
, 20, "%u\n", sdkp
->lbpme
);
362 static DEVICE_ATTR_RO(thin_provisioning
);
364 static const char *lbp_mode
[] = {
365 [SD_LBP_FULL
] = "full",
366 [SD_LBP_UNMAP
] = "unmap",
367 [SD_LBP_WS16
] = "writesame_16",
368 [SD_LBP_WS10
] = "writesame_10",
369 [SD_LBP_ZERO
] = "writesame_zero",
370 [SD_LBP_DISABLE
] = "disabled",
374 provisioning_mode_show(struct device
*dev
, struct device_attribute
*attr
,
377 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
379 return snprintf(buf
, 20, "%s\n", lbp_mode
[sdkp
->provisioning_mode
]);
383 provisioning_mode_store(struct device
*dev
, struct device_attribute
*attr
,
384 const char *buf
, size_t count
)
386 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
387 struct scsi_device
*sdp
= sdkp
->device
;
389 if (!capable(CAP_SYS_ADMIN
))
392 if (sdp
->type
!= TYPE_DISK
)
395 if (!strncmp(buf
, lbp_mode
[SD_LBP_UNMAP
], 20))
396 sd_config_discard(sdkp
, SD_LBP_UNMAP
);
397 else if (!strncmp(buf
, lbp_mode
[SD_LBP_WS16
], 20))
398 sd_config_discard(sdkp
, SD_LBP_WS16
);
399 else if (!strncmp(buf
, lbp_mode
[SD_LBP_WS10
], 20))
400 sd_config_discard(sdkp
, SD_LBP_WS10
);
401 else if (!strncmp(buf
, lbp_mode
[SD_LBP_ZERO
], 20))
402 sd_config_discard(sdkp
, SD_LBP_ZERO
);
403 else if (!strncmp(buf
, lbp_mode
[SD_LBP_DISABLE
], 20))
404 sd_config_discard(sdkp
, SD_LBP_DISABLE
);
410 static DEVICE_ATTR_RW(provisioning_mode
);
413 max_medium_access_timeouts_show(struct device
*dev
,
414 struct device_attribute
*attr
, char *buf
)
416 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
418 return snprintf(buf
, 20, "%u\n", sdkp
->max_medium_access_timeouts
);
422 max_medium_access_timeouts_store(struct device
*dev
,
423 struct device_attribute
*attr
, const char *buf
,
426 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
429 if (!capable(CAP_SYS_ADMIN
))
432 err
= kstrtouint(buf
, 10, &sdkp
->max_medium_access_timeouts
);
434 return err
? err
: count
;
436 static DEVICE_ATTR_RW(max_medium_access_timeouts
);
439 max_write_same_blocks_show(struct device
*dev
, struct device_attribute
*attr
,
442 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
444 return snprintf(buf
, 20, "%u\n", sdkp
->max_ws_blocks
);
448 max_write_same_blocks_store(struct device
*dev
, struct device_attribute
*attr
,
449 const char *buf
, size_t count
)
451 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
452 struct scsi_device
*sdp
= sdkp
->device
;
456 if (!capable(CAP_SYS_ADMIN
))
459 if (sdp
->type
!= TYPE_DISK
)
462 err
= kstrtoul(buf
, 10, &max
);
468 sdp
->no_write_same
= 1;
469 else if (max
<= SD_MAX_WS16_BLOCKS
) {
470 sdp
->no_write_same
= 0;
471 sdkp
->max_ws_blocks
= max
;
474 sd_config_write_same(sdkp
);
478 static DEVICE_ATTR_RW(max_write_same_blocks
);
480 static struct attribute
*sd_disk_attrs
[] = {
481 &dev_attr_cache_type
.attr
,
483 &dev_attr_allow_restart
.attr
,
484 &dev_attr_manage_start_stop
.attr
,
485 &dev_attr_protection_type
.attr
,
486 &dev_attr_protection_mode
.attr
,
487 &dev_attr_app_tag_own
.attr
,
488 &dev_attr_thin_provisioning
.attr
,
489 &dev_attr_provisioning_mode
.attr
,
490 &dev_attr_max_write_same_blocks
.attr
,
491 &dev_attr_max_medium_access_timeouts
.attr
,
494 ATTRIBUTE_GROUPS(sd_disk
);
496 static struct class sd_disk_class
= {
498 .owner
= THIS_MODULE
,
499 .dev_release
= scsi_disk_release
,
500 .dev_groups
= sd_disk_groups
,
503 static const struct dev_pm_ops sd_pm_ops
= {
504 .suspend
= sd_suspend_system
,
506 .poweroff
= sd_suspend_system
,
507 .restore
= sd_resume
,
508 .runtime_suspend
= sd_suspend_runtime
,
509 .runtime_resume
= sd_resume
,
512 static struct scsi_driver sd_template
= {
513 .owner
= THIS_MODULE
,
518 .shutdown
= sd_shutdown
,
522 .init_command
= sd_init_command
,
523 .uninit_command
= sd_uninit_command
,
525 .eh_action
= sd_eh_action
,
529 * Dummy kobj_map->probe function.
530 * The default ->probe function will call modprobe, which is
531 * pointless as this module is already loaded.
533 static struct kobject
*sd_default_probe(dev_t devt
, int *partno
, void *data
)
539 * Device no to disk mapping:
541 * major disc2 disc p1
542 * |............|.............|....|....| <- dev_t
545 * Inside a major, we have 16k disks, however mapped non-
546 * contiguously. The first 16 disks are for major0, the next
547 * ones with major1, ... Disk 256 is for major0 again, disk 272
549 * As we stay compatible with our numbering scheme, we can reuse
550 * the well-know SCSI majors 8, 65--71, 136--143.
552 static int sd_major(int major_idx
)
556 return SCSI_DISK0_MAJOR
;
558 return SCSI_DISK1_MAJOR
+ major_idx
- 1;
560 return SCSI_DISK8_MAJOR
+ major_idx
- 8;
563 return 0; /* shut up gcc */
567 static struct scsi_disk
*__scsi_disk_get(struct gendisk
*disk
)
569 struct scsi_disk
*sdkp
= NULL
;
571 if (disk
->private_data
) {
572 sdkp
= scsi_disk(disk
);
573 if (scsi_device_get(sdkp
->device
) == 0)
574 get_device(&sdkp
->dev
);
581 static struct scsi_disk
*scsi_disk_get(struct gendisk
*disk
)
583 struct scsi_disk
*sdkp
;
585 mutex_lock(&sd_ref_mutex
);
586 sdkp
= __scsi_disk_get(disk
);
587 mutex_unlock(&sd_ref_mutex
);
591 static struct scsi_disk
*scsi_disk_get_from_dev(struct device
*dev
)
593 struct scsi_disk
*sdkp
;
595 mutex_lock(&sd_ref_mutex
);
596 sdkp
= dev_get_drvdata(dev
);
598 sdkp
= __scsi_disk_get(sdkp
->disk
);
599 mutex_unlock(&sd_ref_mutex
);
603 static void scsi_disk_put(struct scsi_disk
*sdkp
)
605 struct scsi_device
*sdev
= sdkp
->device
;
607 mutex_lock(&sd_ref_mutex
);
608 put_device(&sdkp
->dev
);
609 scsi_device_put(sdev
);
610 mutex_unlock(&sd_ref_mutex
);
615 static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd
*scmd
,
616 unsigned int dix
, unsigned int dif
)
618 struct bio
*bio
= scmd
->request
->bio
;
619 unsigned int prot_op
= sd_prot_op(rq_data_dir(scmd
->request
), dix
, dif
);
620 unsigned int protect
= 0;
622 if (dix
) { /* DIX Type 0, 1, 2, 3 */
623 if (bio_integrity_flagged(bio
, BIP_IP_CHECKSUM
))
624 scmd
->prot_flags
|= SCSI_PROT_IP_CHECKSUM
;
626 if (bio_integrity_flagged(bio
, BIP_CTRL_NOCHECK
) == false)
627 scmd
->prot_flags
|= SCSI_PROT_GUARD_CHECK
;
630 if (dif
!= SD_DIF_TYPE3_PROTECTION
) { /* DIX/DIF Type 0, 1, 2 */
631 scmd
->prot_flags
|= SCSI_PROT_REF_INCREMENT
;
633 if (bio_integrity_flagged(bio
, BIP_CTRL_NOCHECK
) == false)
634 scmd
->prot_flags
|= SCSI_PROT_REF_CHECK
;
637 if (dif
) { /* DIX/DIF Type 1, 2, 3 */
638 scmd
->prot_flags
|= SCSI_PROT_TRANSFER_PI
;
640 if (bio_integrity_flagged(bio
, BIP_DISK_NOCHECK
))
641 protect
= 3 << 5; /* Disable target PI checking */
643 protect
= 1 << 5; /* Enable target PI checking */
646 scsi_set_prot_op(scmd
, prot_op
);
647 scsi_set_prot_type(scmd
, dif
);
648 scmd
->prot_flags
&= sd_prot_flag_mask(prot_op
);
653 static void sd_config_discard(struct scsi_disk
*sdkp
, unsigned int mode
)
655 struct request_queue
*q
= sdkp
->disk
->queue
;
656 unsigned int logical_block_size
= sdkp
->device
->sector_size
;
657 unsigned int max_blocks
= 0;
659 q
->limits
.discard_zeroes_data
= sdkp
->lbprz
;
660 q
->limits
.discard_alignment
= sdkp
->unmap_alignment
*
662 q
->limits
.discard_granularity
=
663 max(sdkp
->physical_block_size
,
664 sdkp
->unmap_granularity
* logical_block_size
);
666 sdkp
->provisioning_mode
= mode
;
671 q
->limits
.max_discard_sectors
= 0;
672 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD
, q
);
676 max_blocks
= min_not_zero(sdkp
->max_unmap_blocks
,
677 (u32
)SD_MAX_WS16_BLOCKS
);
681 max_blocks
= min_not_zero(sdkp
->max_ws_blocks
,
682 (u32
)SD_MAX_WS16_BLOCKS
);
686 max_blocks
= min_not_zero(sdkp
->max_ws_blocks
,
687 (u32
)SD_MAX_WS10_BLOCKS
);
691 max_blocks
= min_not_zero(sdkp
->max_ws_blocks
,
692 (u32
)SD_MAX_WS10_BLOCKS
);
693 q
->limits
.discard_zeroes_data
= 1;
697 q
->limits
.max_discard_sectors
= max_blocks
* (logical_block_size
>> 9);
698 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD
, q
);
702 * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
703 * @sdp: scsi device to operate one
704 * @rq: Request to prepare
706 * Will issue either UNMAP or WRITE SAME(16) depending on preference
707 * indicated by target device.
709 static int sd_setup_discard_cmnd(struct scsi_cmnd
*cmd
)
711 struct request
*rq
= cmd
->request
;
712 struct scsi_device
*sdp
= cmd
->device
;
713 struct scsi_disk
*sdkp
= scsi_disk(rq
->rq_disk
);
714 sector_t sector
= blk_rq_pos(rq
);
715 unsigned int nr_sectors
= blk_rq_sectors(rq
);
716 unsigned int nr_bytes
= blk_rq_bytes(rq
);
722 sector
>>= ilog2(sdp
->sector_size
) - 9;
723 nr_sectors
>>= ilog2(sdp
->sector_size
) - 9;
725 page
= alloc_page(GFP_ATOMIC
| __GFP_ZERO
);
727 return BLKPREP_DEFER
;
729 switch (sdkp
->provisioning_mode
) {
731 buf
= page_address(page
);
734 cmd
->cmnd
[0] = UNMAP
;
737 put_unaligned_be16(6 + 16, &buf
[0]);
738 put_unaligned_be16(16, &buf
[2]);
739 put_unaligned_be64(sector
, &buf
[8]);
740 put_unaligned_be32(nr_sectors
, &buf
[16]);
747 cmd
->cmnd
[0] = WRITE_SAME_16
;
748 cmd
->cmnd
[1] = 0x8; /* UNMAP */
749 put_unaligned_be64(sector
, &cmd
->cmnd
[2]);
750 put_unaligned_be32(nr_sectors
, &cmd
->cmnd
[10]);
752 len
= sdkp
->device
->sector_size
;
758 cmd
->cmnd
[0] = WRITE_SAME
;
759 if (sdkp
->provisioning_mode
== SD_LBP_WS10
)
760 cmd
->cmnd
[1] = 0x8; /* UNMAP */
761 put_unaligned_be32(sector
, &cmd
->cmnd
[2]);
762 put_unaligned_be16(nr_sectors
, &cmd
->cmnd
[7]);
764 len
= sdkp
->device
->sector_size
;
772 rq
->completion_data
= page
;
773 rq
->timeout
= SD_TIMEOUT
;
775 cmd
->transfersize
= len
;
776 cmd
->allowed
= SD_MAX_RETRIES
;
779 * Initially __data_len is set to the amount of data that needs to be
780 * transferred to the target. This amount depends on whether WRITE SAME
781 * or UNMAP is being used. After the scatterlist has been mapped by
782 * scsi_init_io() we set __data_len to the size of the area to be
783 * discarded on disk. This allows us to report completion on the full
784 * amount of blocks described by the request.
786 blk_add_request_payload(rq
, page
, len
);
787 ret
= scsi_init_io(cmd
, GFP_ATOMIC
);
788 rq
->__data_len
= nr_bytes
;
791 if (ret
!= BLKPREP_OK
)
796 static void sd_config_write_same(struct scsi_disk
*sdkp
)
798 struct request_queue
*q
= sdkp
->disk
->queue
;
799 unsigned int logical_block_size
= sdkp
->device
->sector_size
;
801 if (sdkp
->device
->no_write_same
) {
802 sdkp
->max_ws_blocks
= 0;
806 /* Some devices can not handle block counts above 0xffff despite
807 * supporting WRITE SAME(16). Consequently we default to 64k
808 * blocks per I/O unless the device explicitly advertises a
811 if (sdkp
->max_ws_blocks
> SD_MAX_WS10_BLOCKS
)
812 sdkp
->max_ws_blocks
= min_not_zero(sdkp
->max_ws_blocks
,
813 (u32
)SD_MAX_WS16_BLOCKS
);
814 else if (sdkp
->ws16
|| sdkp
->ws10
|| sdkp
->device
->no_report_opcodes
)
815 sdkp
->max_ws_blocks
= min_not_zero(sdkp
->max_ws_blocks
,
816 (u32
)SD_MAX_WS10_BLOCKS
);
818 sdkp
->device
->no_write_same
= 1;
819 sdkp
->max_ws_blocks
= 0;
823 blk_queue_max_write_same_sectors(q
, sdkp
->max_ws_blocks
*
824 (logical_block_size
>> 9));
828 * sd_setup_write_same_cmnd - write the same data to multiple blocks
829 * @cmd: command to prepare
831 * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
832 * preference indicated by target device.
834 static int sd_setup_write_same_cmnd(struct scsi_cmnd
*cmd
)
836 struct request
*rq
= cmd
->request
;
837 struct scsi_device
*sdp
= cmd
->device
;
838 struct scsi_disk
*sdkp
= scsi_disk(rq
->rq_disk
);
839 struct bio
*bio
= rq
->bio
;
840 sector_t sector
= blk_rq_pos(rq
);
841 unsigned int nr_sectors
= blk_rq_sectors(rq
);
842 unsigned int nr_bytes
= blk_rq_bytes(rq
);
845 if (sdkp
->device
->no_write_same
)
848 BUG_ON(bio_offset(bio
) || bio_iovec(bio
).bv_len
!= sdp
->sector_size
);
850 sector
>>= ilog2(sdp
->sector_size
) - 9;
851 nr_sectors
>>= ilog2(sdp
->sector_size
) - 9;
853 rq
->timeout
= SD_WRITE_SAME_TIMEOUT
;
855 if (sdkp
->ws16
|| sector
> 0xffffffff || nr_sectors
> 0xffff) {
857 cmd
->cmnd
[0] = WRITE_SAME_16
;
858 put_unaligned_be64(sector
, &cmd
->cmnd
[2]);
859 put_unaligned_be32(nr_sectors
, &cmd
->cmnd
[10]);
862 cmd
->cmnd
[0] = WRITE_SAME
;
863 put_unaligned_be32(sector
, &cmd
->cmnd
[2]);
864 put_unaligned_be16(nr_sectors
, &cmd
->cmnd
[7]);
867 cmd
->transfersize
= sdp
->sector_size
;
868 cmd
->allowed
= SD_MAX_RETRIES
;
871 * For WRITE_SAME the data transferred in the DATA IN buffer is
872 * different from the amount of data actually written to the target.
874 * We set up __data_len to the amount of data transferred from the
875 * DATA IN buffer so that blk_rq_map_sg set up the proper S/G list
876 * to transfer a single sector of data first, but then reset it to
877 * the amount of data to be written right after so that the I/O path
878 * knows how much to actually write.
880 rq
->__data_len
= sdp
->sector_size
;
881 ret
= scsi_init_io(cmd
, GFP_ATOMIC
);
882 rq
->__data_len
= nr_bytes
;
886 static int sd_setup_flush_cmnd(struct scsi_cmnd
*cmd
)
888 struct request
*rq
= cmd
->request
;
890 /* flush requests don't perform I/O, zero the S/G table */
891 memset(&cmd
->sdb
, 0, sizeof(cmd
->sdb
));
893 cmd
->cmnd
[0] = SYNCHRONIZE_CACHE
;
895 cmd
->transfersize
= 0;
896 cmd
->allowed
= SD_MAX_RETRIES
;
898 rq
->timeout
= rq
->q
->rq_timeout
* SD_FLUSH_TIMEOUT_MULTIPLIER
;
902 static int sd_setup_read_write_cmnd(struct scsi_cmnd
*SCpnt
)
904 struct request
*rq
= SCpnt
->request
;
905 struct scsi_device
*sdp
= SCpnt
->device
;
906 struct gendisk
*disk
= rq
->rq_disk
;
907 struct scsi_disk
*sdkp
;
908 sector_t block
= blk_rq_pos(rq
);
910 unsigned int this_count
= blk_rq_sectors(rq
);
911 unsigned int dif
, dix
;
913 unsigned char protect
;
915 ret
= scsi_init_io(SCpnt
, GFP_ATOMIC
);
916 if (ret
!= BLKPREP_OK
)
919 sdkp
= scsi_disk(disk
);
921 /* from here on until we're complete, any goto out
922 * is used for a killable error condition */
926 scmd_printk(KERN_INFO
, SCpnt
,
927 "%s: block=%llu, count=%d\n",
928 __func__
, (unsigned long long)block
, this_count
));
930 if (!sdp
|| !scsi_device_online(sdp
) ||
931 block
+ blk_rq_sectors(rq
) > get_capacity(disk
)) {
932 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO
, SCpnt
,
933 "Finishing %u sectors\n",
934 blk_rq_sectors(rq
)));
935 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO
, SCpnt
,
936 "Retry with 0x%p\n", SCpnt
));
942 * quietly refuse to do anything to a changed disc until
943 * the changed bit has been reset
945 /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
950 * Some SD card readers can't handle multi-sector accesses which touch
951 * the last one or two hardware sectors. Split accesses as needed.
953 threshold
= get_capacity(disk
) - SD_LAST_BUGGY_SECTORS
*
954 (sdp
->sector_size
/ 512);
956 if (unlikely(sdp
->last_sector_bug
&& block
+ this_count
> threshold
)) {
957 if (block
< threshold
) {
958 /* Access up to the threshold but not beyond */
959 this_count
= threshold
- block
;
961 /* Access only a single hardware sector */
962 this_count
= sdp
->sector_size
/ 512;
966 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO
, SCpnt
, "block=%llu\n",
967 (unsigned long long)block
));
970 * If we have a 1K hardware sectorsize, prevent access to single
971 * 512 byte sectors. In theory we could handle this - in fact
972 * the scsi cdrom driver must be able to handle this because
973 * we typically use 1K blocksizes, and cdroms typically have
974 * 2K hardware sectorsizes. Of course, things are simpler
975 * with the cdrom, since it is read-only. For performance
976 * reasons, the filesystems should be able to handle this
977 * and not force the scsi disk driver to use bounce buffers
980 if (sdp
->sector_size
== 1024) {
981 if ((block
& 1) || (blk_rq_sectors(rq
) & 1)) {
982 scmd_printk(KERN_ERR
, SCpnt
,
983 "Bad block number requested\n");
987 this_count
= this_count
>> 1;
990 if (sdp
->sector_size
== 2048) {
991 if ((block
& 3) || (blk_rq_sectors(rq
) & 3)) {
992 scmd_printk(KERN_ERR
, SCpnt
,
993 "Bad block number requested\n");
997 this_count
= this_count
>> 2;
1000 if (sdp
->sector_size
== 4096) {
1001 if ((block
& 7) || (blk_rq_sectors(rq
) & 7)) {
1002 scmd_printk(KERN_ERR
, SCpnt
,
1003 "Bad block number requested\n");
1007 this_count
= this_count
>> 3;
1010 if (rq_data_dir(rq
) == WRITE
) {
1011 SCpnt
->cmnd
[0] = WRITE_6
;
1013 if (blk_integrity_rq(rq
))
1014 sd_dif_prepare(SCpnt
);
1016 } else if (rq_data_dir(rq
) == READ
) {
1017 SCpnt
->cmnd
[0] = READ_6
;
1019 scmd_printk(KERN_ERR
, SCpnt
, "Unknown command %llx\n", (unsigned long long) rq
->cmd_flags
);
1023 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO
, SCpnt
,
1024 "%s %d/%u 512 byte blocks.\n",
1025 (rq_data_dir(rq
) == WRITE
) ?
1026 "writing" : "reading", this_count
,
1027 blk_rq_sectors(rq
)));
1029 dix
= scsi_prot_sg_count(SCpnt
);
1030 dif
= scsi_host_dif_capable(SCpnt
->device
->host
, sdkp
->protection_type
);
1033 protect
= sd_setup_protect_cmnd(SCpnt
, dix
, dif
);
1037 if (protect
&& sdkp
->protection_type
== SD_DIF_TYPE2_PROTECTION
) {
1038 SCpnt
->cmnd
= mempool_alloc(sd_cdb_pool
, GFP_ATOMIC
);
1040 if (unlikely(SCpnt
->cmnd
== NULL
)) {
1041 ret
= BLKPREP_DEFER
;
1045 SCpnt
->cmd_len
= SD_EXT_CDB_SIZE
;
1046 memset(SCpnt
->cmnd
, 0, SCpnt
->cmd_len
);
1047 SCpnt
->cmnd
[0] = VARIABLE_LENGTH_CMD
;
1048 SCpnt
->cmnd
[7] = 0x18;
1049 SCpnt
->cmnd
[9] = (rq_data_dir(rq
) == READ
) ? READ_32
: WRITE_32
;
1050 SCpnt
->cmnd
[10] = protect
| ((rq
->cmd_flags
& REQ_FUA
) ? 0x8 : 0);
1053 SCpnt
->cmnd
[12] = sizeof(block
) > 4 ? (unsigned char) (block
>> 56) & 0xff : 0;
1054 SCpnt
->cmnd
[13] = sizeof(block
) > 4 ? (unsigned char) (block
>> 48) & 0xff : 0;
1055 SCpnt
->cmnd
[14] = sizeof(block
) > 4 ? (unsigned char) (block
>> 40) & 0xff : 0;
1056 SCpnt
->cmnd
[15] = sizeof(block
) > 4 ? (unsigned char) (block
>> 32) & 0xff : 0;
1057 SCpnt
->cmnd
[16] = (unsigned char) (block
>> 24) & 0xff;
1058 SCpnt
->cmnd
[17] = (unsigned char) (block
>> 16) & 0xff;
1059 SCpnt
->cmnd
[18] = (unsigned char) (block
>> 8) & 0xff;
1060 SCpnt
->cmnd
[19] = (unsigned char) block
& 0xff;
1062 /* Expected Indirect LBA */
1063 SCpnt
->cmnd
[20] = (unsigned char) (block
>> 24) & 0xff;
1064 SCpnt
->cmnd
[21] = (unsigned char) (block
>> 16) & 0xff;
1065 SCpnt
->cmnd
[22] = (unsigned char) (block
>> 8) & 0xff;
1066 SCpnt
->cmnd
[23] = (unsigned char) block
& 0xff;
1068 /* Transfer length */
1069 SCpnt
->cmnd
[28] = (unsigned char) (this_count
>> 24) & 0xff;
1070 SCpnt
->cmnd
[29] = (unsigned char) (this_count
>> 16) & 0xff;
1071 SCpnt
->cmnd
[30] = (unsigned char) (this_count
>> 8) & 0xff;
1072 SCpnt
->cmnd
[31] = (unsigned char) this_count
& 0xff;
1073 } else if (sdp
->use_16_for_rw
|| (this_count
> 0xffff)) {
1074 SCpnt
->cmnd
[0] += READ_16
- READ_6
;
1075 SCpnt
->cmnd
[1] = protect
| ((rq
->cmd_flags
& REQ_FUA
) ? 0x8 : 0);
1076 SCpnt
->cmnd
[2] = sizeof(block
) > 4 ? (unsigned char) (block
>> 56) & 0xff : 0;
1077 SCpnt
->cmnd
[3] = sizeof(block
) > 4 ? (unsigned char) (block
>> 48) & 0xff : 0;
1078 SCpnt
->cmnd
[4] = sizeof(block
) > 4 ? (unsigned char) (block
>> 40) & 0xff : 0;
1079 SCpnt
->cmnd
[5] = sizeof(block
) > 4 ? (unsigned char) (block
>> 32) & 0xff : 0;
1080 SCpnt
->cmnd
[6] = (unsigned char) (block
>> 24) & 0xff;
1081 SCpnt
->cmnd
[7] = (unsigned char) (block
>> 16) & 0xff;
1082 SCpnt
->cmnd
[8] = (unsigned char) (block
>> 8) & 0xff;
1083 SCpnt
->cmnd
[9] = (unsigned char) block
& 0xff;
1084 SCpnt
->cmnd
[10] = (unsigned char) (this_count
>> 24) & 0xff;
1085 SCpnt
->cmnd
[11] = (unsigned char) (this_count
>> 16) & 0xff;
1086 SCpnt
->cmnd
[12] = (unsigned char) (this_count
>> 8) & 0xff;
1087 SCpnt
->cmnd
[13] = (unsigned char) this_count
& 0xff;
1088 SCpnt
->cmnd
[14] = SCpnt
->cmnd
[15] = 0;
1089 } else if ((this_count
> 0xff) || (block
> 0x1fffff) ||
1090 scsi_device_protection(SCpnt
->device
) ||
1091 SCpnt
->device
->use_10_for_rw
) {
1092 SCpnt
->cmnd
[0] += READ_10
- READ_6
;
1093 SCpnt
->cmnd
[1] = protect
| ((rq
->cmd_flags
& REQ_FUA
) ? 0x8 : 0);
1094 SCpnt
->cmnd
[2] = (unsigned char) (block
>> 24) & 0xff;
1095 SCpnt
->cmnd
[3] = (unsigned char) (block
>> 16) & 0xff;
1096 SCpnt
->cmnd
[4] = (unsigned char) (block
>> 8) & 0xff;
1097 SCpnt
->cmnd
[5] = (unsigned char) block
& 0xff;
1098 SCpnt
->cmnd
[6] = SCpnt
->cmnd
[9] = 0;
1099 SCpnt
->cmnd
[7] = (unsigned char) (this_count
>> 8) & 0xff;
1100 SCpnt
->cmnd
[8] = (unsigned char) this_count
& 0xff;
1102 if (unlikely(rq
->cmd_flags
& REQ_FUA
)) {
1104 * This happens only if this drive failed
1105 * 10byte rw command with ILLEGAL_REQUEST
1106 * during operation and thus turned off
1109 scmd_printk(KERN_ERR
, SCpnt
,
1110 "FUA write on READ/WRITE(6) drive\n");
1114 SCpnt
->cmnd
[1] |= (unsigned char) ((block
>> 16) & 0x1f);
1115 SCpnt
->cmnd
[2] = (unsigned char) ((block
>> 8) & 0xff);
1116 SCpnt
->cmnd
[3] = (unsigned char) block
& 0xff;
1117 SCpnt
->cmnd
[4] = (unsigned char) this_count
;
1120 SCpnt
->sdb
.length
= this_count
* sdp
->sector_size
;
1123 * We shouldn't disconnect in the middle of a sector, so with a dumb
1124 * host adapter, it's safe to assume that we can at least transfer
1125 * this many bytes between each connect / disconnect.
1127 SCpnt
->transfersize
= sdp
->sector_size
;
1128 SCpnt
->underflow
= this_count
<< 9;
1129 SCpnt
->allowed
= SD_MAX_RETRIES
;
1132 * This indicates that the command is ready from our end to be
1140 static int sd_init_command(struct scsi_cmnd
*cmd
)
1142 struct request
*rq
= cmd
->request
;
1144 if (rq
->cmd_flags
& REQ_DISCARD
)
1145 return sd_setup_discard_cmnd(cmd
);
1146 else if (rq
->cmd_flags
& REQ_WRITE_SAME
)
1147 return sd_setup_write_same_cmnd(cmd
);
1148 else if (rq
->cmd_flags
& REQ_FLUSH
)
1149 return sd_setup_flush_cmnd(cmd
);
1151 return sd_setup_read_write_cmnd(cmd
);
1154 static void sd_uninit_command(struct scsi_cmnd
*SCpnt
)
1156 struct request
*rq
= SCpnt
->request
;
1158 if (rq
->cmd_flags
& REQ_DISCARD
)
1159 __free_page(rq
->completion_data
);
1161 if (SCpnt
->cmnd
!= rq
->cmd
) {
1162 mempool_free(SCpnt
->cmnd
, sd_cdb_pool
);
1169 * sd_open - open a scsi disk device
1170 * @inode: only i_rdev member may be used
1171 * @filp: only f_mode and f_flags may be used
1173 * Returns 0 if successful. Returns a negated errno value in case
1176 * Note: This can be called from a user context (e.g. fsck(1) )
1177 * or from within the kernel (e.g. as a result of a mount(1) ).
1178 * In the latter case @inode and @filp carry an abridged amount
1179 * of information as noted above.
1181 * Locking: called with bdev->bd_mutex held.
1183 static int sd_open(struct block_device
*bdev
, fmode_t mode
)
1185 struct scsi_disk
*sdkp
= scsi_disk_get(bdev
->bd_disk
);
1186 struct scsi_device
*sdev
;
1192 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO
, sdkp
, "sd_open\n"));
1194 sdev
= sdkp
->device
;
1197 * If the device is in error recovery, wait until it is done.
1198 * If the device is offline, then disallow any access to it.
1201 if (!scsi_block_when_processing_errors(sdev
))
1204 if (sdev
->removable
|| sdkp
->write_prot
)
1205 check_disk_change(bdev
);
1208 * If the drive is empty, just let the open fail.
1210 retval
= -ENOMEDIUM
;
1211 if (sdev
->removable
&& !sdkp
->media_present
&& !(mode
& FMODE_NDELAY
))
1215 * If the device has the write protect tab set, have the open fail
1216 * if the user expects to be able to write to the thing.
1219 if (sdkp
->write_prot
&& (mode
& FMODE_WRITE
))
1223 * It is possible that the disk changing stuff resulted in
1224 * the device being taken offline. If this is the case,
1225 * report this to the user, and don't pretend that the
1226 * open actually succeeded.
1229 if (!scsi_device_online(sdev
))
1232 if ((atomic_inc_return(&sdkp
->openers
) == 1) && sdev
->removable
) {
1233 if (scsi_block_when_processing_errors(sdev
))
1234 scsi_set_medium_removal(sdev
, SCSI_REMOVAL_PREVENT
);
1240 scsi_disk_put(sdkp
);
1245 * sd_release - invoked when the (last) close(2) is called on this
1247 * @inode: only i_rdev member may be used
1248 * @filp: only f_mode and f_flags may be used
1252 * Note: may block (uninterruptible) if error recovery is underway
1255 * Locking: called with bdev->bd_mutex held.
1257 static void sd_release(struct gendisk
*disk
, fmode_t mode
)
1259 struct scsi_disk
*sdkp
= scsi_disk(disk
);
1260 struct scsi_device
*sdev
= sdkp
->device
;
1262 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO
, sdkp
, "sd_release\n"));
1264 if (atomic_dec_return(&sdkp
->openers
) == 0 && sdev
->removable
) {
1265 if (scsi_block_when_processing_errors(sdev
))
1266 scsi_set_medium_removal(sdev
, SCSI_REMOVAL_ALLOW
);
1270 * XXX and what if there are packets in flight and this close()
1271 * XXX is followed by a "rmmod sd_mod"?
1274 scsi_disk_put(sdkp
);
1277 static int sd_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
1279 struct scsi_disk
*sdkp
= scsi_disk(bdev
->bd_disk
);
1280 struct scsi_device
*sdp
= sdkp
->device
;
1281 struct Scsi_Host
*host
= sdp
->host
;
1284 /* default to most commonly used values */
1285 diskinfo
[0] = 0x40; /* 1 << 6 */
1286 diskinfo
[1] = 0x20; /* 1 << 5 */
1287 diskinfo
[2] = sdkp
->capacity
>> 11;
1289 /* override with calculated, extended default, or driver values */
1290 if (host
->hostt
->bios_param
)
1291 host
->hostt
->bios_param(sdp
, bdev
, sdkp
->capacity
, diskinfo
);
1293 scsicam_bios_param(bdev
, sdkp
->capacity
, diskinfo
);
1295 geo
->heads
= diskinfo
[0];
1296 geo
->sectors
= diskinfo
[1];
1297 geo
->cylinders
= diskinfo
[2];
1302 * sd_ioctl - process an ioctl
1303 * @inode: only i_rdev/i_bdev members may be used
1304 * @filp: only f_mode and f_flags may be used
1305 * @cmd: ioctl command number
1306 * @arg: this is third argument given to ioctl(2) system call.
1307 * Often contains a pointer.
1309 * Returns 0 if successful (some ioctls return positive numbers on
1310 * success as well). Returns a negated errno value in case of error.
1312 * Note: most ioctls are forward onto the block subsystem or further
1313 * down in the scsi subsystem.
1315 static int sd_ioctl(struct block_device
*bdev
, fmode_t mode
,
1316 unsigned int cmd
, unsigned long arg
)
1318 struct gendisk
*disk
= bdev
->bd_disk
;
1319 struct scsi_disk
*sdkp
= scsi_disk(disk
);
1320 struct scsi_device
*sdp
= sdkp
->device
;
1321 void __user
*p
= (void __user
*)arg
;
1324 SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO
, sdkp
, "sd_ioctl: disk=%s, "
1325 "cmd=0x%x\n", disk
->disk_name
, cmd
));
1327 error
= scsi_verify_blk_ioctl(bdev
, cmd
);
1332 * If we are in the middle of error recovery, don't let anyone
1333 * else try and use this device. Also, if error recovery fails, it
1334 * may try and take the device offline, in which case all further
1335 * access to the device is prohibited.
1337 error
= scsi_ioctl_block_when_processing_errors(sdp
, cmd
,
1338 (mode
& FMODE_NDELAY
) != 0);
1343 * Send SCSI addressing ioctls directly to mid level, send other
1344 * ioctls to block level and then onto mid level if they can't be
1348 case SCSI_IOCTL_GET_IDLUN
:
1349 case SCSI_IOCTL_GET_BUS_NUMBER
:
1350 error
= scsi_ioctl(sdp
, cmd
, p
);
1353 error
= scsi_cmd_blk_ioctl(bdev
, mode
, cmd
, p
);
1354 if (error
!= -ENOTTY
)
1356 error
= scsi_ioctl(sdp
, cmd
, p
);
1363 static void set_media_not_present(struct scsi_disk
*sdkp
)
1365 if (sdkp
->media_present
)
1366 sdkp
->device
->changed
= 1;
1368 if (sdkp
->device
->removable
) {
1369 sdkp
->media_present
= 0;
1374 static int media_not_present(struct scsi_disk
*sdkp
,
1375 struct scsi_sense_hdr
*sshdr
)
1377 if (!scsi_sense_valid(sshdr
))
1380 /* not invoked for commands that could return deferred errors */
1381 switch (sshdr
->sense_key
) {
1382 case UNIT_ATTENTION
:
1384 /* medium not present */
1385 if (sshdr
->asc
== 0x3A) {
1386 set_media_not_present(sdkp
);
1394 * sd_check_events - check media events
1395 * @disk: kernel device descriptor
1396 * @clearing: disk events currently being cleared
1398 * Returns mask of DISK_EVENT_*.
1400 * Note: this function is invoked from the block subsystem.
1402 static unsigned int sd_check_events(struct gendisk
*disk
, unsigned int clearing
)
1404 struct scsi_disk
*sdkp
= scsi_disk(disk
);
1405 struct scsi_device
*sdp
= sdkp
->device
;
1406 struct scsi_sense_hdr
*sshdr
= NULL
;
1409 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO
, sdkp
, "sd_check_events\n"));
1412 * If the device is offline, don't send any commands - just pretend as
1413 * if the command failed. If the device ever comes back online, we
1414 * can deal with it then. It is only because of unrecoverable errors
1415 * that we would ever take a device offline in the first place.
1417 if (!scsi_device_online(sdp
)) {
1418 set_media_not_present(sdkp
);
1423 * Using TEST_UNIT_READY enables differentiation between drive with
1424 * no cartridge loaded - NOT READY, drive with changed cartridge -
1425 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1427 * Drives that auto spin down. eg iomega jaz 1G, will be started
1428 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1429 * sd_revalidate() is called.
1433 if (scsi_block_when_processing_errors(sdp
)) {
1434 sshdr
= kzalloc(sizeof(*sshdr
), GFP_KERNEL
);
1435 retval
= scsi_test_unit_ready(sdp
, SD_TIMEOUT
, SD_MAX_RETRIES
,
1439 /* failed to execute TUR, assume media not present */
1440 if (host_byte(retval
)) {
1441 set_media_not_present(sdkp
);
1445 if (media_not_present(sdkp
, sshdr
))
1449 * For removable scsi disk we have to recognise the presence
1450 * of a disk in the drive.
1452 if (!sdkp
->media_present
)
1454 sdkp
->media_present
= 1;
1457 * sdp->changed is set under the following conditions:
1459 * Medium present state has changed in either direction.
1460 * Device has indicated UNIT_ATTENTION.
1463 retval
= sdp
->changed
? DISK_EVENT_MEDIA_CHANGE
: 0;
1468 static int sd_sync_cache(struct scsi_disk
*sdkp
)
1471 struct scsi_device
*sdp
= sdkp
->device
;
1472 const int timeout
= sdp
->request_queue
->rq_timeout
1473 * SD_FLUSH_TIMEOUT_MULTIPLIER
;
1474 struct scsi_sense_hdr sshdr
;
1476 if (!scsi_device_online(sdp
))
1479 for (retries
= 3; retries
> 0; --retries
) {
1480 unsigned char cmd
[10] = { 0 };
1482 cmd
[0] = SYNCHRONIZE_CACHE
;
1484 * Leave the rest of the command zero to indicate
1487 res
= scsi_execute_req_flags(sdp
, cmd
, DMA_NONE
, NULL
, 0,
1488 &sshdr
, timeout
, SD_MAX_RETRIES
,
1495 sd_print_result(sdkp
, "Synchronize Cache(10) failed", res
);
1497 if (driver_byte(res
) & DRIVER_SENSE
)
1498 sd_print_sense_hdr(sdkp
, &sshdr
);
1499 /* we need to evaluate the error return */
1500 if (scsi_sense_valid(&sshdr
) &&
1501 (sshdr
.asc
== 0x3a || /* medium not present */
1502 sshdr
.asc
== 0x20)) /* invalid command */
1503 /* this is no error here */
1506 switch (host_byte(res
)) {
1507 /* ignore errors due to racing a disconnection */
1508 case DID_BAD_TARGET
:
1509 case DID_NO_CONNECT
:
1511 /* signal the upper layer it might try again */
1515 case DID_SOFT_ERROR
:
1524 static void sd_rescan(struct device
*dev
)
1526 struct scsi_disk
*sdkp
= scsi_disk_get_from_dev(dev
);
1529 revalidate_disk(sdkp
->disk
);
1530 scsi_disk_put(sdkp
);
1535 #ifdef CONFIG_COMPAT
1537 * This gets directly called from VFS. When the ioctl
1538 * is not recognized we go back to the other translation paths.
1540 static int sd_compat_ioctl(struct block_device
*bdev
, fmode_t mode
,
1541 unsigned int cmd
, unsigned long arg
)
1543 struct scsi_device
*sdev
= scsi_disk(bdev
->bd_disk
)->device
;
1546 error
= scsi_ioctl_block_when_processing_errors(sdev
, cmd
,
1547 (mode
& FMODE_NDELAY
) != 0);
1552 * Let the static ioctl translation table take care of it.
1554 if (!sdev
->host
->hostt
->compat_ioctl
)
1555 return -ENOIOCTLCMD
;
1556 return sdev
->host
->hostt
->compat_ioctl(sdev
, cmd
, (void __user
*)arg
);
1560 static const struct block_device_operations sd_fops
= {
1561 .owner
= THIS_MODULE
,
1563 .release
= sd_release
,
1565 .getgeo
= sd_getgeo
,
1566 #ifdef CONFIG_COMPAT
1567 .compat_ioctl
= sd_compat_ioctl
,
1569 .check_events
= sd_check_events
,
1570 .revalidate_disk
= sd_revalidate_disk
,
1571 .unlock_native_capacity
= sd_unlock_native_capacity
,
1575 * sd_eh_action - error handling callback
1576 * @scmd: sd-issued command that has failed
1577 * @eh_disp: The recovery disposition suggested by the midlayer
1579 * This function is called by the SCSI midlayer upon completion of an
1580 * error test command (currently TEST UNIT READY). The result of sending
1581 * the eh command is passed in eh_disp. We're looking for devices that
1582 * fail medium access commands but are OK with non access commands like
1583 * test unit ready (so wrongly see the device as having a successful
1586 static int sd_eh_action(struct scsi_cmnd
*scmd
, int eh_disp
)
1588 struct scsi_disk
*sdkp
= scsi_disk(scmd
->request
->rq_disk
);
1590 if (!scsi_device_online(scmd
->device
) ||
1591 !scsi_medium_access_command(scmd
) ||
1592 host_byte(scmd
->result
) != DID_TIME_OUT
||
1597 * The device has timed out executing a medium access command.
1598 * However, the TEST UNIT READY command sent during error
1599 * handling completed successfully. Either the device is in the
1600 * process of recovering or has it suffered an internal failure
1601 * that prevents access to the storage medium.
1603 sdkp
->medium_access_timed_out
++;
1606 * If the device keeps failing read/write commands but TEST UNIT
1607 * READY always completes successfully we assume that medium
1608 * access is no longer possible and take the device offline.
1610 if (sdkp
->medium_access_timed_out
>= sdkp
->max_medium_access_timeouts
) {
1611 scmd_printk(KERN_ERR
, scmd
,
1612 "Medium access timeout failure. Offlining disk!\n");
1613 scsi_device_set_state(scmd
->device
, SDEV_OFFLINE
);
1621 static unsigned int sd_completed_bytes(struct scsi_cmnd
*scmd
)
1623 u64 start_lba
= blk_rq_pos(scmd
->request
);
1624 u64 end_lba
= blk_rq_pos(scmd
->request
) + (scsi_bufflen(scmd
) / 512);
1628 * resid is optional but mostly filled in. When it's unused,
1629 * its value is zero, so we assume the whole buffer transferred
1631 unsigned int transferred
= scsi_bufflen(scmd
) - scsi_get_resid(scmd
);
1632 unsigned int good_bytes
;
1634 if (scmd
->request
->cmd_type
!= REQ_TYPE_FS
)
1637 info_valid
= scsi_get_sense_info_fld(scmd
->sense_buffer
,
1638 SCSI_SENSE_BUFFERSIZE
,
1643 if (scsi_bufflen(scmd
) <= scmd
->device
->sector_size
)
1646 if (scmd
->device
->sector_size
< 512) {
1647 /* only legitimate sector_size here is 256 */
1651 /* be careful ... don't want any overflows */
1652 unsigned int factor
= scmd
->device
->sector_size
/ 512;
1653 do_div(start_lba
, factor
);
1654 do_div(end_lba
, factor
);
1657 /* The bad lba was reported incorrectly, we have no idea where
1660 if (bad_lba
< start_lba
|| bad_lba
>= end_lba
)
1663 /* This computation should always be done in terms of
1664 * the resolution of the device's medium.
1666 good_bytes
= (bad_lba
- start_lba
) * scmd
->device
->sector_size
;
1667 return min(good_bytes
, transferred
);
1671 * sd_done - bottom half handler: called when the lower level
1672 * driver has completed (successfully or otherwise) a scsi command.
1673 * @SCpnt: mid-level's per command structure.
1675 * Note: potentially run from within an ISR. Must not block.
1677 static int sd_done(struct scsi_cmnd
*SCpnt
)
1679 int result
= SCpnt
->result
;
1680 unsigned int good_bytes
= result
? 0 : scsi_bufflen(SCpnt
);
1681 struct scsi_sense_hdr sshdr
;
1682 struct scsi_disk
*sdkp
= scsi_disk(SCpnt
->request
->rq_disk
);
1683 struct request
*req
= SCpnt
->request
;
1684 int sense_valid
= 0;
1685 int sense_deferred
= 0;
1686 unsigned char op
= SCpnt
->cmnd
[0];
1687 unsigned char unmap
= SCpnt
->cmnd
[1] & 8;
1689 if (req
->cmd_flags
& REQ_DISCARD
|| req
->cmd_flags
& REQ_WRITE_SAME
) {
1691 good_bytes
= blk_rq_bytes(req
);
1692 scsi_set_resid(SCpnt
, 0);
1695 scsi_set_resid(SCpnt
, blk_rq_bytes(req
));
1700 sense_valid
= scsi_command_normalize_sense(SCpnt
, &sshdr
);
1702 sense_deferred
= scsi_sense_is_deferred(&sshdr
);
1704 sdkp
->medium_access_timed_out
= 0;
1706 if (driver_byte(result
) != DRIVER_SENSE
&&
1707 (!sense_valid
|| sense_deferred
))
1710 switch (sshdr
.sense_key
) {
1711 case HARDWARE_ERROR
:
1713 good_bytes
= sd_completed_bytes(SCpnt
);
1715 case RECOVERED_ERROR
:
1716 good_bytes
= scsi_bufflen(SCpnt
);
1719 /* This indicates a false check condition, so ignore it. An
1720 * unknown amount of data was transferred so treat it as an
1724 memset(SCpnt
->sense_buffer
, 0, SCSI_SENSE_BUFFERSIZE
);
1726 case ABORTED_COMMAND
:
1727 if (sshdr
.asc
== 0x10) /* DIF: Target detected corruption */
1728 good_bytes
= sd_completed_bytes(SCpnt
);
1730 case ILLEGAL_REQUEST
:
1731 if (sshdr
.asc
== 0x10) /* DIX: Host detected corruption */
1732 good_bytes
= sd_completed_bytes(SCpnt
);
1733 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
1734 if (sshdr
.asc
== 0x20 || sshdr
.asc
== 0x24) {
1737 sd_config_discard(sdkp
, SD_LBP_DISABLE
);
1742 sd_config_discard(sdkp
, SD_LBP_DISABLE
);
1744 sdkp
->device
->no_write_same
= 1;
1745 sd_config_write_same(sdkp
);
1748 req
->__data_len
= blk_rq_bytes(req
);
1749 req
->cmd_flags
|= REQ_QUIET
;
1758 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO
, SCpnt
,
1759 "sd_done: completed %d of %d bytes\n",
1760 good_bytes
, scsi_bufflen(SCpnt
)));
1762 if (rq_data_dir(SCpnt
->request
) == READ
&& scsi_prot_sg_count(SCpnt
))
1763 sd_dif_complete(SCpnt
, good_bytes
);
1769 * spinup disk - called only in sd_revalidate_disk()
1772 sd_spinup_disk(struct scsi_disk
*sdkp
)
1774 unsigned char cmd
[10];
1775 unsigned long spintime_expire
= 0;
1776 int retries
, spintime
;
1777 unsigned int the_result
;
1778 struct scsi_sense_hdr sshdr
;
1779 int sense_valid
= 0;
1783 /* Spin up drives, as required. Only do this at boot time */
1784 /* Spinup needs to be done for module loads too. */
1789 cmd
[0] = TEST_UNIT_READY
;
1790 memset((void *) &cmd
[1], 0, 9);
1792 the_result
= scsi_execute_req(sdkp
->device
, cmd
,
1795 SD_MAX_RETRIES
, NULL
);
1798 * If the drive has indicated to us that it
1799 * doesn't have any media in it, don't bother
1800 * with any more polling.
1802 if (media_not_present(sdkp
, &sshdr
))
1806 sense_valid
= scsi_sense_valid(&sshdr
);
1808 } while (retries
< 3 &&
1809 (!scsi_status_is_good(the_result
) ||
1810 ((driver_byte(the_result
) & DRIVER_SENSE
) &&
1811 sense_valid
&& sshdr
.sense_key
== UNIT_ATTENTION
)));
1813 if ((driver_byte(the_result
) & DRIVER_SENSE
) == 0) {
1814 /* no sense, TUR either succeeded or failed
1815 * with a status error */
1816 if(!spintime
&& !scsi_status_is_good(the_result
)) {
1817 sd_print_result(sdkp
, "Test Unit Ready failed",
1824 * The device does not want the automatic start to be issued.
1826 if (sdkp
->device
->no_start_on_add
)
1829 if (sense_valid
&& sshdr
.sense_key
== NOT_READY
) {
1830 if (sshdr
.asc
== 4 && sshdr
.ascq
== 3)
1831 break; /* manual intervention required */
1832 if (sshdr
.asc
== 4 && sshdr
.ascq
== 0xb)
1833 break; /* standby */
1834 if (sshdr
.asc
== 4 && sshdr
.ascq
== 0xc)
1835 break; /* unavailable */
1837 * Issue command to spin up drive when not ready
1840 sd_printk(KERN_NOTICE
, sdkp
, "Spinning up disk...");
1841 cmd
[0] = START_STOP
;
1842 cmd
[1] = 1; /* Return immediately */
1843 memset((void *) &cmd
[2], 0, 8);
1844 cmd
[4] = 1; /* Start spin cycle */
1845 if (sdkp
->device
->start_stop_pwr_cond
)
1847 scsi_execute_req(sdkp
->device
, cmd
, DMA_NONE
,
1849 SD_TIMEOUT
, SD_MAX_RETRIES
,
1851 spintime_expire
= jiffies
+ 100 * HZ
;
1854 /* Wait 1 second for next try */
1859 * Wait for USB flash devices with slow firmware.
1860 * Yes, this sense key/ASC combination shouldn't
1861 * occur here. It's characteristic of these devices.
1863 } else if (sense_valid
&&
1864 sshdr
.sense_key
== UNIT_ATTENTION
&&
1865 sshdr
.asc
== 0x28) {
1867 spintime_expire
= jiffies
+ 5 * HZ
;
1870 /* Wait 1 second for next try */
1873 /* we don't understand the sense code, so it's
1874 * probably pointless to loop */
1876 sd_printk(KERN_NOTICE
, sdkp
, "Unit Not Ready\n");
1877 sd_print_sense_hdr(sdkp
, &sshdr
);
1882 } while (spintime
&& time_before_eq(jiffies
, spintime_expire
));
1885 if (scsi_status_is_good(the_result
))
1888 printk("not responding...\n");
1894 * Determine whether disk supports Data Integrity Field.
1896 static int sd_read_protection_type(struct scsi_disk
*sdkp
, unsigned char *buffer
)
1898 struct scsi_device
*sdp
= sdkp
->device
;
1902 if (scsi_device_protection(sdp
) == 0 || (buffer
[12] & 1) == 0)
1905 type
= ((buffer
[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
1907 if (type
> SD_DIF_TYPE3_PROTECTION
)
1909 else if (scsi_host_dif_capable(sdp
->host
, type
))
1912 if (sdkp
->first_scan
|| type
!= sdkp
->protection_type
)
1915 sd_printk(KERN_ERR
, sdkp
, "formatted with unsupported" \
1916 " protection type %u. Disabling disk!\n",
1920 sd_printk(KERN_NOTICE
, sdkp
,
1921 "Enabling DIF Type %u protection\n", type
);
1924 sd_printk(KERN_NOTICE
, sdkp
,
1925 "Disabling DIF Type %u protection\n", type
);
1929 sdkp
->protection_type
= type
;
1934 static void read_capacity_error(struct scsi_disk
*sdkp
, struct scsi_device
*sdp
,
1935 struct scsi_sense_hdr
*sshdr
, int sense_valid
,
1938 if (driver_byte(the_result
) & DRIVER_SENSE
)
1939 sd_print_sense_hdr(sdkp
, sshdr
);
1941 sd_printk(KERN_NOTICE
, sdkp
, "Sense not available.\n");
1944 * Set dirty bit for removable devices if not ready -
1945 * sometimes drives will not report this properly.
1947 if (sdp
->removable
&&
1948 sense_valid
&& sshdr
->sense_key
== NOT_READY
)
1949 set_media_not_present(sdkp
);
1952 * We used to set media_present to 0 here to indicate no media
1953 * in the drive, but some drives fail read capacity even with
1954 * media present, so we can't do that.
1956 sdkp
->capacity
= 0; /* unknown mapped to zero - as usual */
1960 #if RC16_LEN > SD_BUF_SIZE
1961 #error RC16_LEN must not be more than SD_BUF_SIZE
1964 #define READ_CAPACITY_RETRIES_ON_RESET 10
1966 static int read_capacity_16(struct scsi_disk
*sdkp
, struct scsi_device
*sdp
,
1967 unsigned char *buffer
)
1969 unsigned char cmd
[16];
1970 struct scsi_sense_hdr sshdr
;
1971 int sense_valid
= 0;
1973 int retries
= 3, reset_retries
= READ_CAPACITY_RETRIES_ON_RESET
;
1974 unsigned int alignment
;
1975 unsigned long long lba
;
1976 unsigned sector_size
;
1978 if (sdp
->no_read_capacity_16
)
1983 cmd
[0] = SERVICE_ACTION_IN
;
1984 cmd
[1] = SAI_READ_CAPACITY_16
;
1986 memset(buffer
, 0, RC16_LEN
);
1988 the_result
= scsi_execute_req(sdp
, cmd
, DMA_FROM_DEVICE
,
1989 buffer
, RC16_LEN
, &sshdr
,
1990 SD_TIMEOUT
, SD_MAX_RETRIES
, NULL
);
1992 if (media_not_present(sdkp
, &sshdr
))
1996 sense_valid
= scsi_sense_valid(&sshdr
);
1998 sshdr
.sense_key
== ILLEGAL_REQUEST
&&
1999 (sshdr
.asc
== 0x20 || sshdr
.asc
== 0x24) &&
2001 /* Invalid Command Operation Code or
2002 * Invalid Field in CDB, just retry
2003 * silently with RC10 */
2006 sshdr
.sense_key
== UNIT_ATTENTION
&&
2007 sshdr
.asc
== 0x29 && sshdr
.ascq
== 0x00)
2008 /* Device reset might occur several times,
2009 * give it one more chance */
2010 if (--reset_retries
> 0)
2015 } while (the_result
&& retries
);
2018 sd_print_result(sdkp
, "Read Capacity(16) failed", the_result
);
2019 read_capacity_error(sdkp
, sdp
, &sshdr
, sense_valid
, the_result
);
2023 sector_size
= get_unaligned_be32(&buffer
[8]);
2024 lba
= get_unaligned_be64(&buffer
[0]);
2026 if (sd_read_protection_type(sdkp
, buffer
) < 0) {
2031 if ((sizeof(sdkp
->capacity
) == 4) && (lba
>= 0xffffffffULL
)) {
2032 sd_printk(KERN_ERR
, sdkp
, "Too big for this kernel. Use a "
2033 "kernel compiled with support for large block "
2039 /* Logical blocks per physical block exponent */
2040 sdkp
->physical_block_size
= (1 << (buffer
[13] & 0xf)) * sector_size
;
2042 /* Lowest aligned logical block */
2043 alignment
= ((buffer
[14] & 0x3f) << 8 | buffer
[15]) * sector_size
;
2044 blk_queue_alignment_offset(sdp
->request_queue
, alignment
);
2045 if (alignment
&& sdkp
->first_scan
)
2046 sd_printk(KERN_NOTICE
, sdkp
,
2047 "physical block alignment offset: %u\n", alignment
);
2049 if (buffer
[14] & 0x80) { /* LBPME */
2052 if (buffer
[14] & 0x40) /* LBPRZ */
2055 sd_config_discard(sdkp
, SD_LBP_WS16
);
2058 sdkp
->capacity
= lba
+ 1;
2062 static int read_capacity_10(struct scsi_disk
*sdkp
, struct scsi_device
*sdp
,
2063 unsigned char *buffer
)
2065 unsigned char cmd
[16];
2066 struct scsi_sense_hdr sshdr
;
2067 int sense_valid
= 0;
2069 int retries
= 3, reset_retries
= READ_CAPACITY_RETRIES_ON_RESET
;
2071 unsigned sector_size
;
2074 cmd
[0] = READ_CAPACITY
;
2075 memset(&cmd
[1], 0, 9);
2076 memset(buffer
, 0, 8);
2078 the_result
= scsi_execute_req(sdp
, cmd
, DMA_FROM_DEVICE
,
2080 SD_TIMEOUT
, SD_MAX_RETRIES
, NULL
);
2082 if (media_not_present(sdkp
, &sshdr
))
2086 sense_valid
= scsi_sense_valid(&sshdr
);
2088 sshdr
.sense_key
== UNIT_ATTENTION
&&
2089 sshdr
.asc
== 0x29 && sshdr
.ascq
== 0x00)
2090 /* Device reset might occur several times,
2091 * give it one more chance */
2092 if (--reset_retries
> 0)
2097 } while (the_result
&& retries
);
2100 sd_print_result(sdkp
, "Read Capacity(10) failed", the_result
);
2101 read_capacity_error(sdkp
, sdp
, &sshdr
, sense_valid
, the_result
);
2105 sector_size
= get_unaligned_be32(&buffer
[4]);
2106 lba
= get_unaligned_be32(&buffer
[0]);
2108 if (sdp
->no_read_capacity_16
&& (lba
== 0xffffffff)) {
2109 /* Some buggy (usb cardreader) devices return an lba of
2110 0xffffffff when the want to report a size of 0 (with
2111 which they really mean no media is present) */
2113 sdkp
->physical_block_size
= sector_size
;
2117 if ((sizeof(sdkp
->capacity
) == 4) && (lba
== 0xffffffff)) {
2118 sd_printk(KERN_ERR
, sdkp
, "Too big for this kernel. Use a "
2119 "kernel compiled with support for large block "
2125 sdkp
->capacity
= lba
+ 1;
2126 sdkp
->physical_block_size
= sector_size
;
2130 static int sd_try_rc16_first(struct scsi_device
*sdp
)
2132 if (sdp
->host
->max_cmd_len
< 16)
2134 if (sdp
->try_rc_10_first
)
2136 if (sdp
->scsi_level
> SCSI_SPC_2
)
2138 if (scsi_device_protection(sdp
))
2144 * read disk capacity
2147 sd_read_capacity(struct scsi_disk
*sdkp
, unsigned char *buffer
)
2150 struct scsi_device
*sdp
= sdkp
->device
;
2151 sector_t old_capacity
= sdkp
->capacity
;
2153 if (sd_try_rc16_first(sdp
)) {
2154 sector_size
= read_capacity_16(sdkp
, sdp
, buffer
);
2155 if (sector_size
== -EOVERFLOW
)
2157 if (sector_size
== -ENODEV
)
2159 if (sector_size
< 0)
2160 sector_size
= read_capacity_10(sdkp
, sdp
, buffer
);
2161 if (sector_size
< 0)
2164 sector_size
= read_capacity_10(sdkp
, sdp
, buffer
);
2165 if (sector_size
== -EOVERFLOW
)
2167 if (sector_size
< 0)
2169 if ((sizeof(sdkp
->capacity
) > 4) &&
2170 (sdkp
->capacity
> 0xffffffffULL
)) {
2171 int old_sector_size
= sector_size
;
2172 sd_printk(KERN_NOTICE
, sdkp
, "Very big device. "
2173 "Trying to use READ CAPACITY(16).\n");
2174 sector_size
= read_capacity_16(sdkp
, sdp
, buffer
);
2175 if (sector_size
< 0) {
2176 sd_printk(KERN_NOTICE
, sdkp
,
2177 "Using 0xffffffff as device size\n");
2178 sdkp
->capacity
= 1 + (sector_t
) 0xffffffff;
2179 sector_size
= old_sector_size
;
2185 /* Some devices are known to return the total number of blocks,
2186 * not the highest block number. Some devices have versions
2187 * which do this and others which do not. Some devices we might
2188 * suspect of doing this but we don't know for certain.
2190 * If we know the reported capacity is wrong, decrement it. If
2191 * we can only guess, then assume the number of blocks is even
2192 * (usually true but not always) and err on the side of lowering
2195 if (sdp
->fix_capacity
||
2196 (sdp
->guess_capacity
&& (sdkp
->capacity
& 0x01))) {
2197 sd_printk(KERN_INFO
, sdkp
, "Adjusting the sector count "
2198 "from its reported value: %llu\n",
2199 (unsigned long long) sdkp
->capacity
);
2204 if (sector_size
== 0) {
2206 sd_printk(KERN_NOTICE
, sdkp
, "Sector size 0 reported, "
2210 if (sector_size
!= 512 &&
2211 sector_size
!= 1024 &&
2212 sector_size
!= 2048 &&
2213 sector_size
!= 4096 &&
2214 sector_size
!= 256) {
2215 sd_printk(KERN_NOTICE
, sdkp
, "Unsupported sector size %d.\n",
2218 * The user might want to re-format the drive with
2219 * a supported sectorsize. Once this happens, it
2220 * would be relatively trivial to set the thing up.
2221 * For this reason, we leave the thing in the table.
2225 * set a bogus sector size so the normal read/write
2226 * logic in the block layer will eventually refuse any
2227 * request on this device without tripping over power
2228 * of two sector size assumptions
2232 blk_queue_logical_block_size(sdp
->request_queue
, sector_size
);
2235 char cap_str_2
[10], cap_str_10
[10];
2236 u64 sz
= (u64
)sdkp
->capacity
<< ilog2(sector_size
);
2238 string_get_size(sz
, STRING_UNITS_2
, cap_str_2
,
2240 string_get_size(sz
, STRING_UNITS_10
, cap_str_10
,
2241 sizeof(cap_str_10
));
2243 if (sdkp
->first_scan
|| old_capacity
!= sdkp
->capacity
) {
2244 sd_printk(KERN_NOTICE
, sdkp
,
2245 "%llu %d-byte logical blocks: (%s/%s)\n",
2246 (unsigned long long)sdkp
->capacity
,
2247 sector_size
, cap_str_10
, cap_str_2
);
2249 if (sdkp
->physical_block_size
!= sector_size
)
2250 sd_printk(KERN_NOTICE
, sdkp
,
2251 "%u-byte physical blocks\n",
2252 sdkp
->physical_block_size
);
2256 if (sdkp
->capacity
> 0xffffffff) {
2257 sdp
->use_16_for_rw
= 1;
2258 sdkp
->max_xfer_blocks
= SD_MAX_XFER_BLOCKS
;
2260 sdkp
->max_xfer_blocks
= SD_DEF_XFER_BLOCKS
;
2262 /* Rescale capacity to 512-byte units */
2263 if (sector_size
== 4096)
2264 sdkp
->capacity
<<= 3;
2265 else if (sector_size
== 2048)
2266 sdkp
->capacity
<<= 2;
2267 else if (sector_size
== 1024)
2268 sdkp
->capacity
<<= 1;
2269 else if (sector_size
== 256)
2270 sdkp
->capacity
>>= 1;
2272 blk_queue_physical_block_size(sdp
->request_queue
,
2273 sdkp
->physical_block_size
);
2274 sdkp
->device
->sector_size
= sector_size
;
2277 /* called with buffer of length 512 */
2279 sd_do_mode_sense(struct scsi_device
*sdp
, int dbd
, int modepage
,
2280 unsigned char *buffer
, int len
, struct scsi_mode_data
*data
,
2281 struct scsi_sense_hdr
*sshdr
)
2283 return scsi_mode_sense(sdp
, dbd
, modepage
, buffer
, len
,
2284 SD_TIMEOUT
, SD_MAX_RETRIES
, data
,
2289 * read write protect setting, if possible - called only in sd_revalidate_disk()
2290 * called with buffer of length SD_BUF_SIZE
2293 sd_read_write_protect_flag(struct scsi_disk
*sdkp
, unsigned char *buffer
)
2296 struct scsi_device
*sdp
= sdkp
->device
;
2297 struct scsi_mode_data data
;
2298 int old_wp
= sdkp
->write_prot
;
2300 set_disk_ro(sdkp
->disk
, 0);
2301 if (sdp
->skip_ms_page_3f
) {
2302 sd_first_printk(KERN_NOTICE
, sdkp
, "Assuming Write Enabled\n");
2306 if (sdp
->use_192_bytes_for_3f
) {
2307 res
= sd_do_mode_sense(sdp
, 0, 0x3F, buffer
, 192, &data
, NULL
);
2310 * First attempt: ask for all pages (0x3F), but only 4 bytes.
2311 * We have to start carefully: some devices hang if we ask
2312 * for more than is available.
2314 res
= sd_do_mode_sense(sdp
, 0, 0x3F, buffer
, 4, &data
, NULL
);
2317 * Second attempt: ask for page 0 When only page 0 is
2318 * implemented, a request for page 3F may return Sense Key
2319 * 5: Illegal Request, Sense Code 24: Invalid field in
2322 if (!scsi_status_is_good(res
))
2323 res
= sd_do_mode_sense(sdp
, 0, 0, buffer
, 4, &data
, NULL
);
2326 * Third attempt: ask 255 bytes, as we did earlier.
2328 if (!scsi_status_is_good(res
))
2329 res
= sd_do_mode_sense(sdp
, 0, 0x3F, buffer
, 255,
2333 if (!scsi_status_is_good(res
)) {
2334 sd_first_printk(KERN_WARNING
, sdkp
,
2335 "Test WP failed, assume Write Enabled\n");
2337 sdkp
->write_prot
= ((data
.device_specific
& 0x80) != 0);
2338 set_disk_ro(sdkp
->disk
, sdkp
->write_prot
);
2339 if (sdkp
->first_scan
|| old_wp
!= sdkp
->write_prot
) {
2340 sd_printk(KERN_NOTICE
, sdkp
, "Write Protect is %s\n",
2341 sdkp
->write_prot
? "on" : "off");
2342 sd_printk(KERN_DEBUG
, sdkp
,
2343 "Mode Sense: %02x %02x %02x %02x\n",
2344 buffer
[0], buffer
[1], buffer
[2], buffer
[3]);
2350 * sd_read_cache_type - called only from sd_revalidate_disk()
2351 * called with buffer of length SD_BUF_SIZE
2354 sd_read_cache_type(struct scsi_disk
*sdkp
, unsigned char *buffer
)
2357 struct scsi_device
*sdp
= sdkp
->device
;
2362 struct scsi_mode_data data
;
2363 struct scsi_sense_hdr sshdr
;
2364 int old_wce
= sdkp
->WCE
;
2365 int old_rcd
= sdkp
->RCD
;
2366 int old_dpofua
= sdkp
->DPOFUA
;
2369 if (sdkp
->cache_override
)
2373 if (sdp
->skip_ms_page_8
) {
2374 if (sdp
->type
== TYPE_RBC
)
2377 if (sdp
->skip_ms_page_3f
)
2380 if (sdp
->use_192_bytes_for_3f
)
2384 } else if (sdp
->type
== TYPE_RBC
) {
2392 /* cautiously ask */
2393 res
= sd_do_mode_sense(sdp
, dbd
, modepage
, buffer
, first_len
,
2396 if (!scsi_status_is_good(res
))
2399 if (!data
.header_length
) {
2402 sd_first_printk(KERN_ERR
, sdkp
,
2403 "Missing header in MODE_SENSE response\n");
2406 /* that went OK, now ask for the proper length */
2410 * We're only interested in the first three bytes, actually.
2411 * But the data cache page is defined for the first 20.
2415 else if (len
> SD_BUF_SIZE
) {
2416 sd_first_printk(KERN_NOTICE
, sdkp
, "Truncating mode parameter "
2417 "data from %d to %d bytes\n", len
, SD_BUF_SIZE
);
2420 if (modepage
== 0x3F && sdp
->use_192_bytes_for_3f
)
2424 if (len
> first_len
)
2425 res
= sd_do_mode_sense(sdp
, dbd
, modepage
, buffer
, len
,
2428 if (scsi_status_is_good(res
)) {
2429 int offset
= data
.header_length
+ data
.block_descriptor_length
;
2431 while (offset
< len
) {
2432 u8 page_code
= buffer
[offset
] & 0x3F;
2433 u8 spf
= buffer
[offset
] & 0x40;
2435 if (page_code
== 8 || page_code
== 6) {
2436 /* We're interested only in the first 3 bytes.
2438 if (len
- offset
<= 2) {
2439 sd_first_printk(KERN_ERR
, sdkp
,
2440 "Incomplete mode parameter "
2444 modepage
= page_code
;
2448 /* Go to the next page */
2449 if (spf
&& len
- offset
> 3)
2450 offset
+= 4 + (buffer
[offset
+2] << 8) +
2452 else if (!spf
&& len
- offset
> 1)
2453 offset
+= 2 + buffer
[offset
+1];
2455 sd_first_printk(KERN_ERR
, sdkp
,
2457 "parameter data\n");
2463 sd_first_printk(KERN_ERR
, sdkp
, "No Caching mode page found\n");
2467 if (modepage
== 8) {
2468 sdkp
->WCE
= ((buffer
[offset
+ 2] & 0x04) != 0);
2469 sdkp
->RCD
= ((buffer
[offset
+ 2] & 0x01) != 0);
2471 sdkp
->WCE
= ((buffer
[offset
+ 2] & 0x01) == 0);
2475 sdkp
->DPOFUA
= (data
.device_specific
& 0x10) != 0;
2476 if (sdp
->broken_fua
) {
2477 sd_first_printk(KERN_NOTICE
, sdkp
, "Disabling FUA\n");
2479 } else if (sdkp
->DPOFUA
&& !sdkp
->device
->use_10_for_rw
) {
2480 sd_first_printk(KERN_NOTICE
, sdkp
,
2481 "Uses READ/WRITE(6), disabling FUA\n");
2485 /* No cache flush allowed for write protected devices */
2486 if (sdkp
->WCE
&& sdkp
->write_prot
)
2489 if (sdkp
->first_scan
|| old_wce
!= sdkp
->WCE
||
2490 old_rcd
!= sdkp
->RCD
|| old_dpofua
!= sdkp
->DPOFUA
)
2491 sd_printk(KERN_NOTICE
, sdkp
,
2492 "Write cache: %s, read cache: %s, %s\n",
2493 sdkp
->WCE
? "enabled" : "disabled",
2494 sdkp
->RCD
? "disabled" : "enabled",
2495 sdkp
->DPOFUA
? "supports DPO and FUA"
2496 : "doesn't support DPO or FUA");
2502 if (scsi_sense_valid(&sshdr
) &&
2503 sshdr
.sense_key
== ILLEGAL_REQUEST
&&
2504 sshdr
.asc
== 0x24 && sshdr
.ascq
== 0x0)
2505 /* Invalid field in CDB */
2506 sd_first_printk(KERN_NOTICE
, sdkp
, "Cache data unavailable\n");
2508 sd_first_printk(KERN_ERR
, sdkp
,
2509 "Asking for cache data failed\n");
2512 if (sdp
->wce_default_on
) {
2513 sd_first_printk(KERN_NOTICE
, sdkp
,
2514 "Assuming drive cache: write back\n");
2517 sd_first_printk(KERN_ERR
, sdkp
,
2518 "Assuming drive cache: write through\n");
2526 * The ATO bit indicates whether the DIF application tag is available
2527 * for use by the operating system.
2529 static void sd_read_app_tag_own(struct scsi_disk
*sdkp
, unsigned char *buffer
)
2532 struct scsi_device
*sdp
= sdkp
->device
;
2533 struct scsi_mode_data data
;
2534 struct scsi_sense_hdr sshdr
;
2536 if (sdp
->type
!= TYPE_DISK
)
2539 if (sdkp
->protection_type
== 0)
2542 res
= scsi_mode_sense(sdp
, 1, 0x0a, buffer
, 36, SD_TIMEOUT
,
2543 SD_MAX_RETRIES
, &data
, &sshdr
);
2545 if (!scsi_status_is_good(res
) || !data
.header_length
||
2547 sd_first_printk(KERN_WARNING
, sdkp
,
2548 "getting Control mode page failed, assume no ATO\n");
2550 if (scsi_sense_valid(&sshdr
))
2551 sd_print_sense_hdr(sdkp
, &sshdr
);
2556 offset
= data
.header_length
+ data
.block_descriptor_length
;
2558 if ((buffer
[offset
] & 0x3f) != 0x0a) {
2559 sd_first_printk(KERN_ERR
, sdkp
, "ATO Got wrong page\n");
2563 if ((buffer
[offset
+ 5] & 0x80) == 0)
2572 * sd_read_block_limits - Query disk device for preferred I/O sizes.
2573 * @disk: disk to query
2575 static void sd_read_block_limits(struct scsi_disk
*sdkp
)
2577 unsigned int sector_sz
= sdkp
->device
->sector_size
;
2578 const int vpd_len
= 64;
2579 u32 max_xfer_length
;
2580 unsigned char *buffer
= kmalloc(vpd_len
, GFP_KERNEL
);
2583 /* Block Limits VPD */
2584 scsi_get_vpd_page(sdkp
->device
, 0xb0, buffer
, vpd_len
))
2587 max_xfer_length
= get_unaligned_be32(&buffer
[8]);
2588 if (max_xfer_length
)
2589 sdkp
->max_xfer_blocks
= max_xfer_length
;
2591 blk_queue_io_min(sdkp
->disk
->queue
,
2592 get_unaligned_be16(&buffer
[6]) * sector_sz
);
2593 blk_queue_io_opt(sdkp
->disk
->queue
,
2594 get_unaligned_be32(&buffer
[12]) * sector_sz
);
2596 if (buffer
[3] == 0x3c) {
2597 unsigned int lba_count
, desc_count
;
2599 sdkp
->max_ws_blocks
= (u32
)get_unaligned_be64(&buffer
[36]);
2604 lba_count
= get_unaligned_be32(&buffer
[20]);
2605 desc_count
= get_unaligned_be32(&buffer
[24]);
2607 if (lba_count
&& desc_count
)
2608 sdkp
->max_unmap_blocks
= lba_count
;
2610 sdkp
->unmap_granularity
= get_unaligned_be32(&buffer
[28]);
2612 if (buffer
[32] & 0x80)
2613 sdkp
->unmap_alignment
=
2614 get_unaligned_be32(&buffer
[32]) & ~(1 << 31);
2616 if (!sdkp
->lbpvpd
) { /* LBP VPD page not provided */
2618 if (sdkp
->max_unmap_blocks
)
2619 sd_config_discard(sdkp
, SD_LBP_UNMAP
);
2621 sd_config_discard(sdkp
, SD_LBP_WS16
);
2623 } else { /* LBP VPD page tells us what to use */
2625 if (sdkp
->lbpu
&& sdkp
->max_unmap_blocks
)
2626 sd_config_discard(sdkp
, SD_LBP_UNMAP
);
2627 else if (sdkp
->lbpws
)
2628 sd_config_discard(sdkp
, SD_LBP_WS16
);
2629 else if (sdkp
->lbpws10
)
2630 sd_config_discard(sdkp
, SD_LBP_WS10
);
2632 sd_config_discard(sdkp
, SD_LBP_DISABLE
);
2641 * sd_read_block_characteristics - Query block dev. characteristics
2642 * @disk: disk to query
2644 static void sd_read_block_characteristics(struct scsi_disk
*sdkp
)
2646 unsigned char *buffer
;
2648 const int vpd_len
= 64;
2650 buffer
= kmalloc(vpd_len
, GFP_KERNEL
);
2653 /* Block Device Characteristics VPD */
2654 scsi_get_vpd_page(sdkp
->device
, 0xb1, buffer
, vpd_len
))
2657 rot
= get_unaligned_be16(&buffer
[4]);
2660 queue_flag_set_unlocked(QUEUE_FLAG_NONROT
, sdkp
->disk
->queue
);
2661 queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM
, sdkp
->disk
->queue
);
2669 * sd_read_block_provisioning - Query provisioning VPD page
2670 * @disk: disk to query
2672 static void sd_read_block_provisioning(struct scsi_disk
*sdkp
)
2674 unsigned char *buffer
;
2675 const int vpd_len
= 8;
2677 if (sdkp
->lbpme
== 0)
2680 buffer
= kmalloc(vpd_len
, GFP_KERNEL
);
2682 if (!buffer
|| scsi_get_vpd_page(sdkp
->device
, 0xb2, buffer
, vpd_len
))
2686 sdkp
->lbpu
= (buffer
[5] >> 7) & 1; /* UNMAP */
2687 sdkp
->lbpws
= (buffer
[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */
2688 sdkp
->lbpws10
= (buffer
[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */
2694 static void sd_read_write_same(struct scsi_disk
*sdkp
, unsigned char *buffer
)
2696 struct scsi_device
*sdev
= sdkp
->device
;
2698 if (sdev
->host
->no_write_same
) {
2699 sdev
->no_write_same
= 1;
2704 if (scsi_report_opcode(sdev
, buffer
, SD_BUF_SIZE
, INQUIRY
) < 0) {
2705 /* too large values might cause issues with arcmsr */
2706 int vpd_buf_len
= 64;
2708 sdev
->no_report_opcodes
= 1;
2710 /* Disable WRITE SAME if REPORT SUPPORTED OPERATION
2711 * CODES is unsupported and the device has an ATA
2712 * Information VPD page (SAT).
2714 if (!scsi_get_vpd_page(sdev
, 0x89, buffer
, vpd_buf_len
))
2715 sdev
->no_write_same
= 1;
2718 if (scsi_report_opcode(sdev
, buffer
, SD_BUF_SIZE
, WRITE_SAME_16
) == 1)
2721 if (scsi_report_opcode(sdev
, buffer
, SD_BUF_SIZE
, WRITE_SAME
) == 1)
2725 static int sd_try_extended_inquiry(struct scsi_device
*sdp
)
2727 /* Attempt VPD inquiry if the device blacklist explicitly calls
2730 if (sdp
->try_vpd_pages
)
2733 * Although VPD inquiries can go to SCSI-2 type devices,
2734 * some USB ones crash on receiving them, and the pages
2735 * we currently ask for are for SPC-3 and beyond
2737 if (sdp
->scsi_level
> SCSI_SPC_2
&& !sdp
->skip_vpd_pages
)
2743 * sd_revalidate_disk - called the first time a new disk is seen,
2744 * performs disk spin up, read_capacity, etc.
2745 * @disk: struct gendisk we care about
2747 static int sd_revalidate_disk(struct gendisk
*disk
)
2749 struct scsi_disk
*sdkp
= scsi_disk(disk
);
2750 struct scsi_device
*sdp
= sdkp
->device
;
2751 unsigned char *buffer
;
2752 unsigned int max_xfer
;
2754 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO
, sdkp
,
2755 "sd_revalidate_disk\n"));
2758 * If the device is offline, don't try and read capacity or any
2759 * of the other niceties.
2761 if (!scsi_device_online(sdp
))
2764 buffer
= kmalloc(SD_BUF_SIZE
, GFP_KERNEL
);
2766 sd_printk(KERN_WARNING
, sdkp
, "sd_revalidate_disk: Memory "
2767 "allocation failure.\n");
2771 sd_spinup_disk(sdkp
);
2774 * Without media there is no reason to ask; moreover, some devices
2775 * react badly if we do.
2777 if (sdkp
->media_present
) {
2778 sd_read_capacity(sdkp
, buffer
);
2780 if (sd_try_extended_inquiry(sdp
)) {
2781 sd_read_block_provisioning(sdkp
);
2782 sd_read_block_limits(sdkp
);
2783 sd_read_block_characteristics(sdkp
);
2786 sd_read_write_protect_flag(sdkp
, buffer
);
2787 sd_read_cache_type(sdkp
, buffer
);
2788 sd_read_app_tag_own(sdkp
, buffer
);
2789 sd_read_write_same(sdkp
, buffer
);
2792 sdkp
->first_scan
= 0;
2795 * We now have all cache related info, determine how we deal
2796 * with flush requests.
2798 sd_set_flush_flag(sdkp
);
2800 max_xfer
= min_not_zero(queue_max_hw_sectors(sdkp
->disk
->queue
),
2801 sdkp
->max_xfer_blocks
);
2802 max_xfer
<<= ilog2(sdp
->sector_size
) - 9;
2803 blk_queue_max_hw_sectors(sdkp
->disk
->queue
, max_xfer
);
2804 set_capacity(disk
, sdkp
->capacity
);
2805 sd_config_write_same(sdkp
);
2813 * sd_unlock_native_capacity - unlock native capacity
2814 * @disk: struct gendisk to set capacity for
2816 * Block layer calls this function if it detects that partitions
2817 * on @disk reach beyond the end of the device. If the SCSI host
2818 * implements ->unlock_native_capacity() method, it's invoked to
2819 * give it a chance to adjust the device capacity.
2822 * Defined by block layer. Might sleep.
2824 static void sd_unlock_native_capacity(struct gendisk
*disk
)
2826 struct scsi_device
*sdev
= scsi_disk(disk
)->device
;
2828 if (sdev
->host
->hostt
->unlock_native_capacity
)
2829 sdev
->host
->hostt
->unlock_native_capacity(sdev
);
2833 * sd_format_disk_name - format disk name
2834 * @prefix: name prefix - ie. "sd" for SCSI disks
2835 * @index: index of the disk to format name for
2836 * @buf: output buffer
2837 * @buflen: length of the output buffer
2839 * SCSI disk names starts at sda. The 26th device is sdz and the
2840 * 27th is sdaa. The last one for two lettered suffix is sdzz
2841 * which is followed by sdaaa.
2843 * This is basically 26 base counting with one extra 'nil' entry
2844 * at the beginning from the second digit on and can be
2845 * determined using similar method as 26 base conversion with the
2846 * index shifted -1 after each digit is computed.
2852 * 0 on success, -errno on failure.
2854 static int sd_format_disk_name(char *prefix
, int index
, char *buf
, int buflen
)
2856 const int base
= 'z' - 'a' + 1;
2857 char *begin
= buf
+ strlen(prefix
);
2858 char *end
= buf
+ buflen
;
2868 *--p
= 'a' + (index
% unit
);
2869 index
= (index
/ unit
) - 1;
2870 } while (index
>= 0);
2872 memmove(begin
, p
, end
- p
);
2873 memcpy(buf
, prefix
, strlen(prefix
));
2879 * The asynchronous part of sd_probe
2881 static void sd_probe_async(void *data
, async_cookie_t cookie
)
2883 struct scsi_disk
*sdkp
= data
;
2884 struct scsi_device
*sdp
;
2891 index
= sdkp
->index
;
2892 dev
= &sdp
->sdev_gendev
;
2894 gd
->major
= sd_major((index
& 0xf0) >> 4);
2895 gd
->first_minor
= ((index
& 0xf) << 4) | (index
& 0xfff00);
2896 gd
->minors
= SD_MINORS
;
2898 gd
->fops
= &sd_fops
;
2899 gd
->private_data
= &sdkp
->driver
;
2900 gd
->queue
= sdkp
->device
->request_queue
;
2902 /* defaults, until the device tells us otherwise */
2903 sdp
->sector_size
= 512;
2905 sdkp
->media_present
= 1;
2906 sdkp
->write_prot
= 0;
2907 sdkp
->cache_override
= 0;
2911 sdkp
->first_scan
= 1;
2912 sdkp
->max_medium_access_timeouts
= SD_MAX_MEDIUM_TIMEOUTS
;
2914 sd_revalidate_disk(gd
);
2916 gd
->driverfs_dev
= &sdp
->sdev_gendev
;
2917 gd
->flags
= GENHD_FL_EXT_DEVT
;
2918 if (sdp
->removable
) {
2919 gd
->flags
|= GENHD_FL_REMOVABLE
;
2920 gd
->events
|= DISK_EVENT_MEDIA_CHANGE
;
2923 blk_pm_runtime_init(sdp
->request_queue
, dev
);
2926 sd_dif_config_host(sdkp
);
2928 sd_revalidate_disk(gd
);
2930 sd_printk(KERN_NOTICE
, sdkp
, "Attached SCSI %sdisk\n",
2931 sdp
->removable
? "removable " : "");
2932 scsi_autopm_put_device(sdp
);
2933 put_device(&sdkp
->dev
);
2937 * sd_probe - called during driver initialization and whenever a
2938 * new scsi device is attached to the system. It is called once
2939 * for each scsi device (not just disks) present.
2940 * @dev: pointer to device object
2942 * Returns 0 if successful (or not interested in this scsi device
2943 * (e.g. scanner)); 1 when there is an error.
2945 * Note: this function is invoked from the scsi mid-level.
2946 * This function sets up the mapping between a given
2947 * <host,channel,id,lun> (found in sdp) and new device name
2948 * (e.g. /dev/sda). More precisely it is the block device major
2949 * and minor number that is chosen here.
2951 * Assume sd_probe is not re-entrant (for time being)
2952 * Also think about sd_probe() and sd_remove() running coincidentally.
2954 static int sd_probe(struct device
*dev
)
2956 struct scsi_device
*sdp
= to_scsi_device(dev
);
2957 struct scsi_disk
*sdkp
;
2962 scsi_autopm_get_device(sdp
);
2964 if (sdp
->type
!= TYPE_DISK
&& sdp
->type
!= TYPE_MOD
&& sdp
->type
!= TYPE_RBC
)
2967 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO
, sdp
,
2971 sdkp
= kzalloc(sizeof(*sdkp
), GFP_KERNEL
);
2975 gd
= alloc_disk(SD_MINORS
);
2980 if (!ida_pre_get(&sd_index_ida
, GFP_KERNEL
))
2983 spin_lock(&sd_index_lock
);
2984 error
= ida_get_new(&sd_index_ida
, &index
);
2985 spin_unlock(&sd_index_lock
);
2986 } while (error
== -EAGAIN
);
2989 sdev_printk(KERN_WARNING
, sdp
, "sd_probe: memory exhausted.\n");
2993 error
= sd_format_disk_name("sd", index
, gd
->disk_name
, DISK_NAME_LEN
);
2995 sdev_printk(KERN_WARNING
, sdp
, "SCSI disk (sd) name length exceeded.\n");
2996 goto out_free_index
;
3000 sdkp
->driver
= &sd_template
;
3002 sdkp
->index
= index
;
3003 atomic_set(&sdkp
->openers
, 0);
3004 atomic_set(&sdkp
->device
->ioerr_cnt
, 0);
3006 if (!sdp
->request_queue
->rq_timeout
) {
3007 if (sdp
->type
!= TYPE_MOD
)
3008 blk_queue_rq_timeout(sdp
->request_queue
, SD_TIMEOUT
);
3010 blk_queue_rq_timeout(sdp
->request_queue
,
3014 device_initialize(&sdkp
->dev
);
3015 sdkp
->dev
.parent
= dev
;
3016 sdkp
->dev
.class = &sd_disk_class
;
3017 dev_set_name(&sdkp
->dev
, "%s", dev_name(dev
));
3019 if (device_add(&sdkp
->dev
))
3020 goto out_free_index
;
3023 dev_set_drvdata(dev
, sdkp
);
3025 get_device(&sdkp
->dev
); /* prevent release before async_schedule */
3026 async_schedule_domain(sd_probe_async
, sdkp
, &scsi_sd_probe_domain
);
3031 spin_lock(&sd_index_lock
);
3032 ida_remove(&sd_index_ida
, index
);
3033 spin_unlock(&sd_index_lock
);
3039 scsi_autopm_put_device(sdp
);
3044 * sd_remove - called whenever a scsi disk (previously recognized by
3045 * sd_probe) is detached from the system. It is called (potentially
3046 * multiple times) during sd module unload.
3047 * @sdp: pointer to mid level scsi device object
3049 * Note: this function is invoked from the scsi mid-level.
3050 * This function potentially frees up a device name (e.g. /dev/sdc)
3051 * that could be re-used by a subsequent sd_probe().
3052 * This function is not called when the built-in sd driver is "exit-ed".
3054 static int sd_remove(struct device
*dev
)
3056 struct scsi_disk
*sdkp
;
3059 sdkp
= dev_get_drvdata(dev
);
3060 devt
= disk_devt(sdkp
->disk
);
3061 scsi_autopm_get_device(sdkp
->device
);
3063 async_synchronize_full_domain(&scsi_sd_pm_domain
);
3064 async_synchronize_full_domain(&scsi_sd_probe_domain
);
3065 device_del(&sdkp
->dev
);
3066 del_gendisk(sdkp
->disk
);
3069 blk_register_region(devt
, SD_MINORS
, NULL
,
3070 sd_default_probe
, NULL
, NULL
);
3072 mutex_lock(&sd_ref_mutex
);
3073 dev_set_drvdata(dev
, NULL
);
3074 put_device(&sdkp
->dev
);
3075 mutex_unlock(&sd_ref_mutex
);
3081 * scsi_disk_release - Called to free the scsi_disk structure
3082 * @dev: pointer to embedded class device
3084 * sd_ref_mutex must be held entering this routine. Because it is
3085 * called on last put, you should always use the scsi_disk_get()
3086 * scsi_disk_put() helpers which manipulate the semaphore directly
3087 * and never do a direct put_device.
3089 static void scsi_disk_release(struct device
*dev
)
3091 struct scsi_disk
*sdkp
= to_scsi_disk(dev
);
3092 struct gendisk
*disk
= sdkp
->disk
;
3094 spin_lock(&sd_index_lock
);
3095 ida_remove(&sd_index_ida
, sdkp
->index
);
3096 spin_unlock(&sd_index_lock
);
3098 disk
->private_data
= NULL
;
3100 put_device(&sdkp
->device
->sdev_gendev
);
3105 static int sd_start_stop_device(struct scsi_disk
*sdkp
, int start
)
3107 unsigned char cmd
[6] = { START_STOP
}; /* START_VALID */
3108 struct scsi_sense_hdr sshdr
;
3109 struct scsi_device
*sdp
= sdkp
->device
;
3113 cmd
[4] |= 1; /* START */
3115 if (sdp
->start_stop_pwr_cond
)
3116 cmd
[4] |= start
? 1 << 4 : 3 << 4; /* Active or Standby */
3118 if (!scsi_device_online(sdp
))
3121 res
= scsi_execute_req_flags(sdp
, cmd
, DMA_NONE
, NULL
, 0, &sshdr
,
3122 SD_TIMEOUT
, SD_MAX_RETRIES
, NULL
, REQ_PM
);
3124 sd_print_result(sdkp
, "Start/Stop Unit failed", res
);
3125 if (driver_byte(res
) & DRIVER_SENSE
)
3126 sd_print_sense_hdr(sdkp
, &sshdr
);
3127 if (scsi_sense_valid(&sshdr
) &&
3128 /* 0x3a is medium not present */
3133 /* SCSI error codes must not go to the generic layer */
3141 * Send a SYNCHRONIZE CACHE instruction down to the device through
3142 * the normal SCSI command structure. Wait for the command to
3145 static void sd_shutdown(struct device
*dev
)
3147 struct scsi_disk
*sdkp
= scsi_disk_get_from_dev(dev
);
3150 return; /* this can happen */
3152 if (pm_runtime_suspended(dev
))
3155 if (sdkp
->WCE
&& sdkp
->media_present
) {
3156 sd_printk(KERN_NOTICE
, sdkp
, "Synchronizing SCSI cache\n");
3157 sd_sync_cache(sdkp
);
3160 if (system_state
!= SYSTEM_RESTART
&& sdkp
->device
->manage_start_stop
) {
3161 sd_printk(KERN_NOTICE
, sdkp
, "Stopping disk\n");
3162 sd_start_stop_device(sdkp
, 0);
3166 scsi_disk_put(sdkp
);
3169 static int sd_suspend_common(struct device
*dev
, bool ignore_stop_errors
)
3171 struct scsi_disk
*sdkp
= scsi_disk_get_from_dev(dev
);
3175 return 0; /* this can happen */
3177 if (sdkp
->WCE
&& sdkp
->media_present
) {
3178 sd_printk(KERN_NOTICE
, sdkp
, "Synchronizing SCSI cache\n");
3179 ret
= sd_sync_cache(sdkp
);
3181 /* ignore OFFLINE device */
3188 if (sdkp
->device
->manage_start_stop
) {
3189 sd_printk(KERN_NOTICE
, sdkp
, "Stopping disk\n");
3190 /* an error is not worth aborting a system sleep */
3191 ret
= sd_start_stop_device(sdkp
, 0);
3192 if (ignore_stop_errors
)
3197 scsi_disk_put(sdkp
);
3201 static int sd_suspend_system(struct device
*dev
)
3203 return sd_suspend_common(dev
, true);
3206 static int sd_suspend_runtime(struct device
*dev
)
3208 return sd_suspend_common(dev
, false);
3211 static int sd_resume(struct device
*dev
)
3213 struct scsi_disk
*sdkp
= scsi_disk_get_from_dev(dev
);
3216 if (!sdkp
->device
->manage_start_stop
)
3219 sd_printk(KERN_NOTICE
, sdkp
, "Starting disk\n");
3220 ret
= sd_start_stop_device(sdkp
, 1);
3223 scsi_disk_put(sdkp
);
3228 * init_sd - entry point for this driver (both when built in or when
3231 * Note: this function registers this driver with the scsi mid-level.
3233 static int __init
init_sd(void)
3235 int majors
= 0, i
, err
;
3237 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
3239 for (i
= 0; i
< SD_MAJORS
; i
++) {
3240 if (register_blkdev(sd_major(i
), "sd") != 0)
3243 blk_register_region(sd_major(i
), SD_MINORS
, NULL
,
3244 sd_default_probe
, NULL
, NULL
);
3250 err
= class_register(&sd_disk_class
);
3254 sd_cdb_cache
= kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE
,
3256 if (!sd_cdb_cache
) {
3257 printk(KERN_ERR
"sd: can't init extended cdb cache\n");
3262 sd_cdb_pool
= mempool_create_slab_pool(SD_MEMPOOL_SIZE
, sd_cdb_cache
);
3264 printk(KERN_ERR
"sd: can't init extended cdb pool\n");
3269 err
= scsi_register_driver(&sd_template
.gendrv
);
3271 goto err_out_driver
;
3276 mempool_destroy(sd_cdb_pool
);
3279 kmem_cache_destroy(sd_cdb_cache
);
3282 class_unregister(&sd_disk_class
);
3284 for (i
= 0; i
< SD_MAJORS
; i
++)
3285 unregister_blkdev(sd_major(i
), "sd");
3290 * exit_sd - exit point for this driver (when it is a module).
3292 * Note: this function unregisters this driver from the scsi mid-level.
3294 static void __exit
exit_sd(void)
3298 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
3300 scsi_unregister_driver(&sd_template
.gendrv
);
3301 mempool_destroy(sd_cdb_pool
);
3302 kmem_cache_destroy(sd_cdb_cache
);
3304 class_unregister(&sd_disk_class
);
3306 for (i
= 0; i
< SD_MAJORS
; i
++) {
3307 blk_unregister_region(sd_major(i
), SD_MINORS
);
3308 unregister_blkdev(sd_major(i
), "sd");
3312 module_init(init_sd
);
3313 module_exit(exit_sd
);
3315 static void sd_print_sense_hdr(struct scsi_disk
*sdkp
,
3316 struct scsi_sense_hdr
*sshdr
)
3318 scsi_show_sense_hdr(sdkp
->device
,
3319 sdkp
->disk
? sdkp
->disk
->disk_name
: NULL
, sshdr
);
3320 scsi_show_extd_sense(sdkp
->device
,
3321 sdkp
->disk
? sdkp
->disk
->disk_name
: NULL
,
3322 sshdr
->asc
, sshdr
->ascq
);
3325 static void sd_print_result(const struct scsi_disk
*sdkp
, const char *msg
,
3328 const char *hb_string
= scsi_hostbyte_string(result
);
3329 const char *db_string
= scsi_driverbyte_string(result
);
3331 if (hb_string
|| db_string
)
3332 sd_printk(KERN_INFO
, sdkp
,
3333 "%s: Result: hostbyte=%s driverbyte=%s\n", msg
,
3334 hb_string
? hb_string
: "invalid",
3335 db_string
? db_string
: "invalid");
3337 sd_printk(KERN_INFO
, sdkp
,
3338 "%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n",
3339 msg
, host_byte(result
), driver_byte(result
));