1 # Helper to resolve issues with configs that have SPI enabled but I2C
2 # modular, meaning we can't build the codec driver in with I2C support.
3 # We use an ordered list of conditional defaults to pick the appropriate
4 # setting - SPI can't be modular so that case doesn't need to be covered.
5 config SND_SOC_I2C_AND_SPI
9 default y if SPI_MASTER=y
11 config SND_SOC_ALL_CODECS
12 tristate "Build all ASoC CODEC drivers"
14 select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
15 select SND_SOC_AD1980 if SND_SOC_AC97_BUS
16 select SND_SOC_AD73311 if I2C
17 select SND_SOC_AK4104 if SPI_MASTER
18 select SND_SOC_AK4535 if I2C
19 select SND_SOC_CS4270 if I2C
20 select SND_SOC_PCM3008
22 select SND_SOC_SSM2602 if I2C
23 select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
24 select SND_SOC_TLV320AIC23 if I2C
25 select SND_SOC_TLV320AIC26 if SPI_MASTER
26 select SND_SOC_TLV320AIC3X if I2C
27 select SND_SOC_TWL4030 if TWL4030_CORE
28 select SND_SOC_UDA134X
29 select SND_SOC_UDA1380 if I2C
30 select SND_SOC_WM8350 if MFD_WM8350
31 select SND_SOC_WM8400 if MFD_WM8400
32 select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
33 select SND_SOC_WM8523 if I2C
34 select SND_SOC_WM8580 if I2C
35 select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
36 select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
37 select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
38 select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
39 select SND_SOC_WM8900 if I2C
40 select SND_SOC_WM8903 if I2C
41 select SND_SOC_WM8940 if I2C
42 select SND_SOC_WM8960 if I2C
43 select SND_SOC_WM8961 if I2C
44 select SND_SOC_WM8971 if I2C
45 select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
46 select SND_SOC_WM8990 if I2C
47 select SND_SOC_WM9081 if I2C
48 select SND_SOC_WM9705 if SND_SOC_AC97_BUS
49 select SND_SOC_WM9712 if SND_SOC_AC97_BUS
50 select SND_SOC_WM9713 if SND_SOC_AC97_BUS
52 Normally ASoC codec drivers are only built if a machine driver which
53 uses them is also built since they are only usable with a machine
54 driver. Selecting this option will allow these drivers to be built
55 without an explicit machine driver for test and development purposes.
57 Support for the bus types used to access the codecs to be built must
58 be selected separately.
63 config SND_SOC_AC97_CODEC
70 config SND_SOC_AD73311
79 # Cirrus Logic CS4270 Codec
83 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
84 # Select if you are affected by the errata where the part will not function
85 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
86 # not select any sample rates that require MCLK to be divided by 1.5.
87 config SND_SOC_CS4270_VD33_ERRATA
89 depends on SND_SOC_CS4270
94 config SND_SOC_PCM3008
100 config SND_SOC_SSM2602
103 config SND_SOC_STAC9766
106 config SND_SOC_TLV320AIC23
109 config SND_SOC_TLV320AIC26
110 tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
113 config SND_SOC_TLV320AIC3X
116 config SND_SOC_TWL4030
119 config SND_SOC_UDA134X
122 config SND_SOC_UDA1380
125 config SND_SOC_WM8350
128 config SND_SOC_WM8400
131 config SND_SOC_WM8510
134 config SND_SOC_WM8523
137 config SND_SOC_WM8580
140 config SND_SOC_WM8728
143 config SND_SOC_WM8731
146 config SND_SOC_WM8750
149 config SND_SOC_WM8753
152 config SND_SOC_WM8900
155 config SND_SOC_WM8903
158 config SND_SOC_WM8940
161 config SND_SOC_WM8960
164 config SND_SOC_WM8961
167 config SND_SOC_WM8971
170 config SND_SOC_WM8988
173 config SND_SOC_WM8990
176 config SND_SOC_WM9081
179 config SND_SOC_WM9705
182 config SND_SOC_WM9712
185 config SND_SOC_WM9713