ARM: tegra: document reset properties in DT bindings
[linux-2.6/btrfs-unstable.git] / arch / x86 / mm / numa.c
blob24aec58d6afdf4ec75390f15413ed26cb47653e8
1 /* Common code for 32 and 64-bit NUMA */
2 #include <linux/kernel.h>
3 #include <linux/mm.h>
4 #include <linux/string.h>
5 #include <linux/init.h>
6 #include <linux/bootmem.h>
7 #include <linux/memblock.h>
8 #include <linux/mmzone.h>
9 #include <linux/ctype.h>
10 #include <linux/module.h>
11 #include <linux/nodemask.h>
12 #include <linux/sched.h>
13 #include <linux/topology.h>
15 #include <asm/e820.h>
16 #include <asm/proto.h>
17 #include <asm/dma.h>
18 #include <asm/acpi.h>
19 #include <asm/amd_nb.h>
21 #include "numa_internal.h"
23 int __initdata numa_off;
24 nodemask_t numa_nodes_parsed __initdata;
26 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
27 EXPORT_SYMBOL(node_data);
29 static struct numa_meminfo numa_meminfo
30 #ifndef CONFIG_MEMORY_HOTPLUG
31 __initdata
32 #endif
35 static int numa_distance_cnt;
36 static u8 *numa_distance;
38 static __init int numa_setup(char *opt)
40 if (!opt)
41 return -EINVAL;
42 if (!strncmp(opt, "off", 3))
43 numa_off = 1;
44 #ifdef CONFIG_NUMA_EMU
45 if (!strncmp(opt, "fake=", 5))
46 numa_emu_cmdline(opt + 5);
47 #endif
48 #ifdef CONFIG_ACPI_NUMA
49 if (!strncmp(opt, "noacpi", 6))
50 acpi_numa = -1;
51 #endif
52 return 0;
54 early_param("numa", numa_setup);
57 * apicid, cpu, node mappings
59 s16 __apicid_to_node[MAX_LOCAL_APIC] = {
60 [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
63 int numa_cpu_node(int cpu)
65 int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
67 if (apicid != BAD_APICID)
68 return __apicid_to_node[apicid];
69 return NUMA_NO_NODE;
72 cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
73 EXPORT_SYMBOL(node_to_cpumask_map);
76 * Map cpu index to node index
78 DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
79 EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
81 void numa_set_node(int cpu, int node)
83 int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
85 /* early setting, no percpu area yet */
86 if (cpu_to_node_map) {
87 cpu_to_node_map[cpu] = node;
88 return;
91 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
92 if (cpu >= nr_cpu_ids || !cpu_possible(cpu)) {
93 printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu);
94 dump_stack();
95 return;
97 #endif
98 per_cpu(x86_cpu_to_node_map, cpu) = node;
100 set_cpu_numa_node(cpu, node);
103 void numa_clear_node(int cpu)
105 numa_set_node(cpu, NUMA_NO_NODE);
109 * Allocate node_to_cpumask_map based on number of available nodes
110 * Requires node_possible_map to be valid.
112 * Note: cpumask_of_node() is not valid until after this is done.
113 * (Use CONFIG_DEBUG_PER_CPU_MAPS to check this.)
115 void __init setup_node_to_cpumask_map(void)
117 unsigned int node;
119 /* setup nr_node_ids if not done yet */
120 if (nr_node_ids == MAX_NUMNODES)
121 setup_nr_node_ids();
123 /* allocate the map */
124 for (node = 0; node < nr_node_ids; node++)
125 alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]);
127 /* cpumask_of_node() will now work */
128 pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids);
131 static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
132 struct numa_meminfo *mi)
134 /* ignore zero length blks */
135 if (start == end)
136 return 0;
138 /* whine about and ignore invalid blks */
139 if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
140 pr_warning("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
141 nid, start, end - 1);
142 return 0;
145 if (mi->nr_blks >= NR_NODE_MEMBLKS) {
146 pr_err("NUMA: too many memblk ranges\n");
147 return -EINVAL;
150 mi->blk[mi->nr_blks].start = start;
151 mi->blk[mi->nr_blks].end = end;
152 mi->blk[mi->nr_blks].nid = nid;
153 mi->nr_blks++;
154 return 0;
158 * numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
159 * @idx: Index of memblk to remove
160 * @mi: numa_meminfo to remove memblk from
162 * Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
163 * decrementing @mi->nr_blks.
165 void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
167 mi->nr_blks--;
168 memmove(&mi->blk[idx], &mi->blk[idx + 1],
169 (mi->nr_blks - idx) * sizeof(mi->blk[0]));
173 * numa_add_memblk - Add one numa_memblk to numa_meminfo
174 * @nid: NUMA node ID of the new memblk
175 * @start: Start address of the new memblk
176 * @end: End address of the new memblk
178 * Add a new memblk to the default numa_meminfo.
180 * RETURNS:
181 * 0 on success, -errno on failure.
183 int __init numa_add_memblk(int nid, u64 start, u64 end)
185 return numa_add_memblk_to(nid, start, end, &numa_meminfo);
188 /* Initialize NODE_DATA for a node on the local memory */
189 static void __init setup_node_data(int nid, u64 start, u64 end)
191 const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
192 u64 nd_pa;
193 void *nd;
194 int tnid;
197 * Don't confuse VM with a node that doesn't have the
198 * minimum amount of memory:
200 if (end && (end - start) < NODE_MIN_SIZE)
201 return;
203 start = roundup(start, ZONE_ALIGN);
205 printk(KERN_INFO "Initmem setup node %d [mem %#010Lx-%#010Lx]\n",
206 nid, start, end - 1);
209 * Allocate node data. Try node-local memory and then any node.
210 * Never allocate in DMA zone.
212 nd_pa = memblock_alloc_nid(nd_size, SMP_CACHE_BYTES, nid);
213 if (!nd_pa) {
214 pr_err("Cannot find %zu bytes in node %d\n",
215 nd_size, nid);
216 return;
218 nd = __va(nd_pa);
220 /* report and initialize */
221 printk(KERN_INFO " NODE_DATA [mem %#010Lx-%#010Lx]\n",
222 nd_pa, nd_pa + nd_size - 1);
223 tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
224 if (tnid != nid)
225 printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nid, tnid);
227 node_data[nid] = nd;
228 memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
229 NODE_DATA(nid)->node_id = nid;
230 NODE_DATA(nid)->node_start_pfn = start >> PAGE_SHIFT;
231 NODE_DATA(nid)->node_spanned_pages = (end - start) >> PAGE_SHIFT;
233 node_set_online(nid);
237 * numa_cleanup_meminfo - Cleanup a numa_meminfo
238 * @mi: numa_meminfo to clean up
240 * Sanitize @mi by merging and removing unncessary memblks. Also check for
241 * conflicts and clear unused memblks.
243 * RETURNS:
244 * 0 on success, -errno on failure.
246 int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
248 const u64 low = 0;
249 const u64 high = PFN_PHYS(max_pfn);
250 int i, j, k;
252 /* first, trim all entries */
253 for (i = 0; i < mi->nr_blks; i++) {
254 struct numa_memblk *bi = &mi->blk[i];
256 /* make sure all blocks are inside the limits */
257 bi->start = max(bi->start, low);
258 bi->end = min(bi->end, high);
260 /* and there's no empty block */
261 if (bi->start >= bi->end)
262 numa_remove_memblk_from(i--, mi);
265 /* merge neighboring / overlapping entries */
266 for (i = 0; i < mi->nr_blks; i++) {
267 struct numa_memblk *bi = &mi->blk[i];
269 for (j = i + 1; j < mi->nr_blks; j++) {
270 struct numa_memblk *bj = &mi->blk[j];
271 u64 start, end;
274 * See whether there are overlapping blocks. Whine
275 * about but allow overlaps of the same nid. They
276 * will be merged below.
278 if (bi->end > bj->start && bi->start < bj->end) {
279 if (bi->nid != bj->nid) {
280 pr_err("NUMA: node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
281 bi->nid, bi->start, bi->end - 1,
282 bj->nid, bj->start, bj->end - 1);
283 return -EINVAL;
285 pr_warning("NUMA: Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
286 bi->nid, bi->start, bi->end - 1,
287 bj->start, bj->end - 1);
291 * Join together blocks on the same node, holes
292 * between which don't overlap with memory on other
293 * nodes.
295 if (bi->nid != bj->nid)
296 continue;
297 start = min(bi->start, bj->start);
298 end = max(bi->end, bj->end);
299 for (k = 0; k < mi->nr_blks; k++) {
300 struct numa_memblk *bk = &mi->blk[k];
302 if (bi->nid == bk->nid)
303 continue;
304 if (start < bk->end && end > bk->start)
305 break;
307 if (k < mi->nr_blks)
308 continue;
309 printk(KERN_INFO "NUMA: Node %d [mem %#010Lx-%#010Lx] + [mem %#010Lx-%#010Lx] -> [mem %#010Lx-%#010Lx]\n",
310 bi->nid, bi->start, bi->end - 1, bj->start,
311 bj->end - 1, start, end - 1);
312 bi->start = start;
313 bi->end = end;
314 numa_remove_memblk_from(j--, mi);
318 /* clear unused ones */
319 for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
320 mi->blk[i].start = mi->blk[i].end = 0;
321 mi->blk[i].nid = NUMA_NO_NODE;
324 return 0;
328 * Set nodes, which have memory in @mi, in *@nodemask.
330 static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
331 const struct numa_meminfo *mi)
333 int i;
335 for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
336 if (mi->blk[i].start != mi->blk[i].end &&
337 mi->blk[i].nid != NUMA_NO_NODE)
338 node_set(mi->blk[i].nid, *nodemask);
342 * numa_reset_distance - Reset NUMA distance table
344 * The current table is freed. The next numa_set_distance() call will
345 * create a new one.
347 void __init numa_reset_distance(void)
349 size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
351 /* numa_distance could be 1LU marking allocation failure, test cnt */
352 if (numa_distance_cnt)
353 memblock_free(__pa(numa_distance), size);
354 numa_distance_cnt = 0;
355 numa_distance = NULL; /* enable table creation */
358 static int __init numa_alloc_distance(void)
360 nodemask_t nodes_parsed;
361 size_t size;
362 int i, j, cnt = 0;
363 u64 phys;
365 /* size the new table and allocate it */
366 nodes_parsed = numa_nodes_parsed;
367 numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
369 for_each_node_mask(i, nodes_parsed)
370 cnt = i;
371 cnt++;
372 size = cnt * cnt * sizeof(numa_distance[0]);
374 phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
375 size, PAGE_SIZE);
376 if (!phys) {
377 pr_warning("NUMA: Warning: can't allocate distance table!\n");
378 /* don't retry until explicitly reset */
379 numa_distance = (void *)1LU;
380 return -ENOMEM;
382 memblock_reserve(phys, size);
384 numa_distance = __va(phys);
385 numa_distance_cnt = cnt;
387 /* fill with the default distances */
388 for (i = 0; i < cnt; i++)
389 for (j = 0; j < cnt; j++)
390 numa_distance[i * cnt + j] = i == j ?
391 LOCAL_DISTANCE : REMOTE_DISTANCE;
392 printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
394 return 0;
398 * numa_set_distance - Set NUMA distance from one NUMA to another
399 * @from: the 'from' node to set distance
400 * @to: the 'to' node to set distance
401 * @distance: NUMA distance
403 * Set the distance from node @from to @to to @distance. If distance table
404 * doesn't exist, one which is large enough to accommodate all the currently
405 * known nodes will be created.
407 * If such table cannot be allocated, a warning is printed and further
408 * calls are ignored until the distance table is reset with
409 * numa_reset_distance().
411 * If @from or @to is higher than the highest known node or lower than zero
412 * at the time of table creation or @distance doesn't make sense, the call
413 * is ignored.
414 * This is to allow simplification of specific NUMA config implementations.
416 void __init numa_set_distance(int from, int to, int distance)
418 if (!numa_distance && numa_alloc_distance() < 0)
419 return;
421 if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
422 from < 0 || to < 0) {
423 pr_warn_once("NUMA: Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
424 from, to, distance);
425 return;
428 if ((u8)distance != distance ||
429 (from == to && distance != LOCAL_DISTANCE)) {
430 pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
431 from, to, distance);
432 return;
435 numa_distance[from * numa_distance_cnt + to] = distance;
438 int __node_distance(int from, int to)
440 if (from >= numa_distance_cnt || to >= numa_distance_cnt)
441 return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
442 return numa_distance[from * numa_distance_cnt + to];
444 EXPORT_SYMBOL(__node_distance);
447 * Sanity check to catch more bad NUMA configurations (they are amazingly
448 * common). Make sure the nodes cover all memory.
450 static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
452 u64 numaram, e820ram;
453 int i;
455 numaram = 0;
456 for (i = 0; i < mi->nr_blks; i++) {
457 u64 s = mi->blk[i].start >> PAGE_SHIFT;
458 u64 e = mi->blk[i].end >> PAGE_SHIFT;
459 numaram += e - s;
460 numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
461 if ((s64)numaram < 0)
462 numaram = 0;
465 e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
467 /* We seem to lose 3 pages somewhere. Allow 1M of slack. */
468 if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
469 printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
470 (numaram << PAGE_SHIFT) >> 20,
471 (e820ram << PAGE_SHIFT) >> 20);
472 return false;
474 return true;
477 static int __init numa_register_memblks(struct numa_meminfo *mi)
479 unsigned long uninitialized_var(pfn_align);
480 int i, nid;
482 /* Account for nodes with cpus and no memory */
483 node_possible_map = numa_nodes_parsed;
484 numa_nodemask_from_meminfo(&node_possible_map, mi);
485 if (WARN_ON(nodes_empty(node_possible_map)))
486 return -EINVAL;
488 for (i = 0; i < mi->nr_blks; i++) {
489 struct numa_memblk *mb = &mi->blk[i];
490 memblock_set_node(mb->start, mb->end - mb->start, mb->nid);
494 * If sections array is gonna be used for pfn -> nid mapping, check
495 * whether its granularity is fine enough.
497 #ifdef NODE_NOT_IN_PAGE_FLAGS
498 pfn_align = node_map_pfn_alignment();
499 if (pfn_align && pfn_align < PAGES_PER_SECTION) {
500 printk(KERN_WARNING "Node alignment %LuMB < min %LuMB, rejecting NUMA config\n",
501 PFN_PHYS(pfn_align) >> 20,
502 PFN_PHYS(PAGES_PER_SECTION) >> 20);
503 return -EINVAL;
505 #endif
506 if (!numa_meminfo_cover_memory(mi))
507 return -EINVAL;
509 /* Finally register nodes. */
510 for_each_node_mask(nid, node_possible_map) {
511 u64 start = PFN_PHYS(max_pfn);
512 u64 end = 0;
514 for (i = 0; i < mi->nr_blks; i++) {
515 if (nid != mi->blk[i].nid)
516 continue;
517 start = min(mi->blk[i].start, start);
518 end = max(mi->blk[i].end, end);
521 if (start < end)
522 setup_node_data(nid, start, end);
525 /* Dump memblock with node info and return. */
526 memblock_dump_all();
527 return 0;
531 * There are unfortunately some poorly designed mainboards around that
532 * only connect memory to a single CPU. This breaks the 1:1 cpu->node
533 * mapping. To avoid this fill in the mapping for all possible CPUs,
534 * as the number of CPUs is not known yet. We round robin the existing
535 * nodes.
537 static void __init numa_init_array(void)
539 int rr, i;
541 rr = first_node(node_online_map);
542 for (i = 0; i < nr_cpu_ids; i++) {
543 if (early_cpu_to_node(i) != NUMA_NO_NODE)
544 continue;
545 numa_set_node(i, rr);
546 rr = next_node(rr, node_online_map);
547 if (rr == MAX_NUMNODES)
548 rr = first_node(node_online_map);
552 static int __init numa_init(int (*init_func)(void))
554 int i;
555 int ret;
557 for (i = 0; i < MAX_LOCAL_APIC; i++)
558 set_apicid_to_node(i, NUMA_NO_NODE);
560 nodes_clear(numa_nodes_parsed);
561 nodes_clear(node_possible_map);
562 nodes_clear(node_online_map);
563 memset(&numa_meminfo, 0, sizeof(numa_meminfo));
564 WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES));
565 numa_reset_distance();
567 ret = init_func();
568 if (ret < 0)
569 return ret;
572 * We reset memblock back to the top-down direction
573 * here because if we configured ACPI_NUMA, we have
574 * parsed SRAT in init_func(). It is ok to have the
575 * reset here even if we did't configure ACPI_NUMA
576 * or acpi numa init fails and fallbacks to dummy
577 * numa init.
579 memblock_set_bottom_up(false);
581 ret = numa_cleanup_meminfo(&numa_meminfo);
582 if (ret < 0)
583 return ret;
585 numa_emulation(&numa_meminfo, numa_distance_cnt);
587 ret = numa_register_memblks(&numa_meminfo);
588 if (ret < 0)
589 return ret;
591 for (i = 0; i < nr_cpu_ids; i++) {
592 int nid = early_cpu_to_node(i);
594 if (nid == NUMA_NO_NODE)
595 continue;
596 if (!node_online(nid))
597 numa_clear_node(i);
599 numa_init_array();
600 return 0;
604 * dummy_numa_init - Fallback dummy NUMA init
606 * Used if there's no underlying NUMA architecture, NUMA initialization
607 * fails, or NUMA is disabled on the command line.
609 * Must online at least one node and add memory blocks that cover all
610 * allowed memory. This function must not fail.
612 static int __init dummy_numa_init(void)
614 printk(KERN_INFO "%s\n",
615 numa_off ? "NUMA turned off" : "No NUMA configuration found");
616 printk(KERN_INFO "Faking a node at [mem %#018Lx-%#018Lx]\n",
617 0LLU, PFN_PHYS(max_pfn) - 1);
619 node_set(0, numa_nodes_parsed);
620 numa_add_memblk(0, 0, PFN_PHYS(max_pfn));
622 return 0;
626 * x86_numa_init - Initialize NUMA
628 * Try each configured NUMA initialization method until one succeeds. The
629 * last fallback is dummy single node config encomapssing whole memory and
630 * never fails.
632 void __init x86_numa_init(void)
634 if (!numa_off) {
635 #ifdef CONFIG_X86_NUMAQ
636 if (!numa_init(numaq_numa_init))
637 return;
638 #endif
639 #ifdef CONFIG_ACPI_NUMA
640 if (!numa_init(x86_acpi_numa_init))
641 return;
642 #endif
643 #ifdef CONFIG_AMD_NUMA
644 if (!numa_init(amd_numa_init))
645 return;
646 #endif
649 numa_init(dummy_numa_init);
652 static __init int find_near_online_node(int node)
654 int n, val;
655 int min_val = INT_MAX;
656 int best_node = -1;
658 for_each_online_node(n) {
659 val = node_distance(node, n);
661 if (val < min_val) {
662 min_val = val;
663 best_node = n;
667 return best_node;
671 * Setup early cpu_to_node.
673 * Populate cpu_to_node[] only if x86_cpu_to_apicid[],
674 * and apicid_to_node[] tables have valid entries for a CPU.
675 * This means we skip cpu_to_node[] initialisation for NUMA
676 * emulation and faking node case (when running a kernel compiled
677 * for NUMA on a non NUMA box), which is OK as cpu_to_node[]
678 * is already initialized in a round robin manner at numa_init_array,
679 * prior to this call, and this initialization is good enough
680 * for the fake NUMA cases.
682 * Called before the per_cpu areas are setup.
684 void __init init_cpu_to_node(void)
686 int cpu;
687 u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
689 BUG_ON(cpu_to_apicid == NULL);
691 for_each_possible_cpu(cpu) {
692 int node = numa_cpu_node(cpu);
694 if (node == NUMA_NO_NODE)
695 continue;
696 if (!node_online(node))
697 node = find_near_online_node(node);
698 numa_set_node(cpu, node);
702 #ifndef CONFIG_DEBUG_PER_CPU_MAPS
704 # ifndef CONFIG_NUMA_EMU
705 void numa_add_cpu(int cpu)
707 cpumask_set_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
710 void numa_remove_cpu(int cpu)
712 cpumask_clear_cpu(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
714 # endif /* !CONFIG_NUMA_EMU */
716 #else /* !CONFIG_DEBUG_PER_CPU_MAPS */
718 int __cpu_to_node(int cpu)
720 if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
721 printk(KERN_WARNING
722 "cpu_to_node(%d): usage too early!\n", cpu);
723 dump_stack();
724 return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
726 return per_cpu(x86_cpu_to_node_map, cpu);
728 EXPORT_SYMBOL(__cpu_to_node);
731 * Same function as cpu_to_node() but used if called before the
732 * per_cpu areas are setup.
734 int early_cpu_to_node(int cpu)
736 if (early_per_cpu_ptr(x86_cpu_to_node_map))
737 return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
739 if (!cpu_possible(cpu)) {
740 printk(KERN_WARNING
741 "early_cpu_to_node(%d): no per_cpu area!\n", cpu);
742 dump_stack();
743 return NUMA_NO_NODE;
745 return per_cpu(x86_cpu_to_node_map, cpu);
748 void debug_cpumask_set_cpu(int cpu, int node, bool enable)
750 struct cpumask *mask;
751 char buf[64];
753 if (node == NUMA_NO_NODE) {
754 /* early_cpu_to_node() already emits a warning and trace */
755 return;
757 mask = node_to_cpumask_map[node];
758 if (!mask) {
759 pr_err("node_to_cpumask_map[%i] NULL\n", node);
760 dump_stack();
761 return;
764 if (enable)
765 cpumask_set_cpu(cpu, mask);
766 else
767 cpumask_clear_cpu(cpu, mask);
769 cpulist_scnprintf(buf, sizeof(buf), mask);
770 printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
771 enable ? "numa_add_cpu" : "numa_remove_cpu",
772 cpu, node, buf);
773 return;
776 # ifndef CONFIG_NUMA_EMU
777 static void numa_set_cpumask(int cpu, bool enable)
779 debug_cpumask_set_cpu(cpu, early_cpu_to_node(cpu), enable);
782 void numa_add_cpu(int cpu)
784 numa_set_cpumask(cpu, true);
787 void numa_remove_cpu(int cpu)
789 numa_set_cpumask(cpu, false);
791 # endif /* !CONFIG_NUMA_EMU */
794 * Returns a pointer to the bitmask of CPUs on Node 'node'.
796 const struct cpumask *cpumask_of_node(int node)
798 if (node >= nr_node_ids) {
799 printk(KERN_WARNING
800 "cpumask_of_node(%d): node > nr_node_ids(%d)\n",
801 node, nr_node_ids);
802 dump_stack();
803 return cpu_none_mask;
805 if (node_to_cpumask_map[node] == NULL) {
806 printk(KERN_WARNING
807 "cpumask_of_node(%d): no node_to_cpumask_map!\n",
808 node);
809 dump_stack();
810 return cpu_online_mask;
812 return node_to_cpumask_map[node];
814 EXPORT_SYMBOL(cpumask_of_node);
816 #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
818 #ifdef CONFIG_MEMORY_HOTPLUG
819 int memory_add_physaddr_to_nid(u64 start)
821 struct numa_meminfo *mi = &numa_meminfo;
822 int nid = mi->blk[0].nid;
823 int i;
825 for (i = 0; i < mi->nr_blks; i++)
826 if (mi->blk[i].start <= start && mi->blk[i].end > start)
827 nid = mi->blk[i].nid;
828 return nid;
830 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
831 #endif