devicetree:bindings: add devicetree bindings for ceva ahci
[linux-2.6/btrfs-unstable.git] / arch / alpha / kernel / pci.c
blob82f738e5d54cb85f5b77c21304fd590d1e5bbbc5
1 /*
2 * linux/arch/alpha/kernel/pci.c
4 * Extruded from code written by
5 * Dave Rusling (david.rusling@reo.mts.dec.com)
6 * David Mosberger (davidm@cs.arizona.edu)
7 */
9 /* 2.3.x PCI/resources, 1999 Andrea Arcangeli <andrea@suse.de> */
12 * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
13 * PCI-PCI bridges cleanup
15 #include <linux/string.h>
16 #include <linux/pci.h>
17 #include <linux/init.h>
18 #include <linux/ioport.h>
19 #include <linux/kernel.h>
20 #include <linux/bootmem.h>
21 #include <linux/module.h>
22 #include <linux/cache.h>
23 #include <linux/slab.h>
24 #include <asm/machvec.h>
26 #include "proto.h"
27 #include "pci_impl.h"
31 * Some string constants used by the various core logics.
34 const char *const pci_io_names[] = {
35 "PCI IO bus 0", "PCI IO bus 1", "PCI IO bus 2", "PCI IO bus 3",
36 "PCI IO bus 4", "PCI IO bus 5", "PCI IO bus 6", "PCI IO bus 7"
39 const char *const pci_mem_names[] = {
40 "PCI mem bus 0", "PCI mem bus 1", "PCI mem bus 2", "PCI mem bus 3",
41 "PCI mem bus 4", "PCI mem bus 5", "PCI mem bus 6", "PCI mem bus 7"
44 const char pci_hae0_name[] = "HAE0";
47 * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
48 * assignments.
52 * The PCI controller list.
55 struct pci_controller *hose_head, **hose_tail = &hose_head;
56 struct pci_controller *pci_isa_hose;
59 * Quirks.
62 static void quirk_isa_bridge(struct pci_dev *dev)
64 dev->class = PCI_CLASS_BRIDGE_ISA << 8;
66 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
68 static void quirk_cypress(struct pci_dev *dev)
70 /* The Notorious Cy82C693 chip. */
72 /* The generic legacy mode IDE fixup in drivers/pci/probe.c
73 doesn't work correctly with the Cypress IDE controller as
74 it has non-standard register layout. Fix that. */
75 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
76 dev->resource[2].start = dev->resource[3].start = 0;
77 dev->resource[2].end = dev->resource[3].end = 0;
78 dev->resource[2].flags = dev->resource[3].flags = 0;
79 if (PCI_FUNC(dev->devfn) == 2) {
80 dev->resource[0].start = 0x170;
81 dev->resource[0].end = 0x177;
82 dev->resource[1].start = 0x376;
83 dev->resource[1].end = 0x376;
87 /* The Cypress bridge responds on the PCI bus in the address range
88 0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no
89 way to turn this off. The bridge also supports several extended
90 BIOS ranges (disabled after power-up), and some consoles do turn
91 them on. So if we use a large direct-map window, or a large SG
92 window, we must avoid the entire 0xfff00000-0xffffffff region. */
93 if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
94 if (__direct_map_base + __direct_map_size >= 0xfff00000UL)
95 __direct_map_size = 0xfff00000UL - __direct_map_base;
96 else {
97 struct pci_controller *hose = dev->sysdata;
98 struct pci_iommu_arena *pci = hose->sg_pci;
99 if (pci && pci->dma_base + pci->size >= 0xfff00000UL)
100 pci->size = 0xfff00000UL - pci->dma_base;
104 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
106 /* Called for each device after PCI setup is done. */
107 static void pcibios_fixup_final(struct pci_dev *dev)
109 unsigned int class = dev->class >> 8;
111 if (class == PCI_CLASS_BRIDGE_ISA || class == PCI_CLASS_BRIDGE_EISA) {
112 dev->dma_mask = MAX_ISA_DMA_ADDRESS - 1;
113 isa_bridge = dev;
116 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
118 /* Just declaring that the power-of-ten prefixes are actually the
119 power-of-two ones doesn't make it true :) */
120 #define KB 1024
121 #define MB (1024*KB)
122 #define GB (1024*MB)
124 resource_size_t
125 pcibios_align_resource(void *data, const struct resource *res,
126 resource_size_t size, resource_size_t align)
128 struct pci_dev *dev = data;
129 struct pci_controller *hose = dev->sysdata;
130 unsigned long alignto;
131 resource_size_t start = res->start;
133 if (res->flags & IORESOURCE_IO) {
134 /* Make sure we start at our min on all hoses */
135 if (start - hose->io_space->start < PCIBIOS_MIN_IO)
136 start = PCIBIOS_MIN_IO + hose->io_space->start;
139 * Put everything into 0x00-0xff region modulo 0x400
141 if (start & 0x300)
142 start = (start + 0x3ff) & ~0x3ff;
144 else if (res->flags & IORESOURCE_MEM) {
145 /* Make sure we start at our min on all hoses */
146 if (start - hose->mem_space->start < PCIBIOS_MIN_MEM)
147 start = PCIBIOS_MIN_MEM + hose->mem_space->start;
150 * The following holds at least for the Low Cost
151 * Alpha implementation of the PCI interface:
153 * In sparse memory address space, the first
154 * octant (16MB) of every 128MB segment is
155 * aliased to the very first 16 MB of the
156 * address space (i.e., it aliases the ISA
157 * memory address space). Thus, we try to
158 * avoid allocating PCI devices in that range.
159 * Can be allocated in 2nd-7th octant only.
160 * Devices that need more than 112MB of
161 * address space must be accessed through
162 * dense memory space only!
165 /* Align to multiple of size of minimum base. */
166 alignto = max_t(resource_size_t, 0x1000, align);
167 start = ALIGN(start, alignto);
168 if (hose->sparse_mem_base && size <= 7 * 16*MB) {
169 if (((start / (16*MB)) & 0x7) == 0) {
170 start &= ~(128*MB - 1);
171 start += 16*MB;
172 start = ALIGN(start, alignto);
174 if (start/(128*MB) != (start + size - 1)/(128*MB)) {
175 start &= ~(128*MB - 1);
176 start += (128 + 16)*MB;
177 start = ALIGN(start, alignto);
182 return start;
184 #undef KB
185 #undef MB
186 #undef GB
188 static int __init
189 pcibios_init(void)
191 if (alpha_mv.init_pci)
192 alpha_mv.init_pci();
193 return 0;
196 subsys_initcall(pcibios_init);
198 #ifdef ALPHA_RESTORE_SRM_SETUP
199 static struct pdev_srm_saved_conf *srm_saved_configs;
201 void pdev_save_srm_config(struct pci_dev *dev)
203 struct pdev_srm_saved_conf *tmp;
204 static int printed = 0;
206 if (!alpha_using_srm || pci_has_flag(PCI_PROBE_ONLY))
207 return;
209 if (!printed) {
210 printk(KERN_INFO "pci: enabling save/restore of SRM state\n");
211 printed = 1;
214 tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
215 if (!tmp) {
216 printk(KERN_ERR "%s: kmalloc() failed!\n", __func__);
217 return;
219 tmp->next = srm_saved_configs;
220 tmp->dev = dev;
222 pci_save_state(dev);
224 srm_saved_configs = tmp;
227 void
228 pci_restore_srm_config(void)
230 struct pdev_srm_saved_conf *tmp;
232 /* No need to restore if probed only. */
233 if (pci_has_flag(PCI_PROBE_ONLY))
234 return;
236 /* Restore SRM config. */
237 for (tmp = srm_saved_configs; tmp; tmp = tmp->next) {
238 pci_restore_state(tmp->dev);
241 #endif
243 void pcibios_fixup_bus(struct pci_bus *bus)
245 struct pci_dev *dev = bus->self;
247 if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
248 (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
249 pci_read_bridge_bases(bus);
252 list_for_each_entry(dev, &bus->devices, bus_list) {
253 pdev_save_srm_config(dev);
258 * If we set up a device for bus mastering, we need to check the latency
259 * timer as certain firmware forgets to set it properly, as seen
260 * on SX164 and LX164 with SRM.
262 void
263 pcibios_set_master(struct pci_dev *dev)
265 u8 lat;
266 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
267 if (lat >= 16) return;
268 printk("PCI: Setting latency timer of device %s to 64\n",
269 pci_name(dev));
270 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
273 void __init
274 pcibios_claim_one_bus(struct pci_bus *b)
276 struct pci_dev *dev;
277 struct pci_bus *child_bus;
279 list_for_each_entry(dev, &b->devices, bus_list) {
280 int i;
282 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
283 struct resource *r = &dev->resource[i];
285 if (r->parent || !r->start || !r->flags)
286 continue;
287 if (pci_has_flag(PCI_PROBE_ONLY) ||
288 (r->flags & IORESOURCE_PCI_FIXED)) {
289 if (pci_claim_resource(dev, i) == 0)
290 continue;
292 pci_claim_bridge_resource(dev, i);
297 list_for_each_entry(child_bus, &b->children, node)
298 pcibios_claim_one_bus(child_bus);
301 static void __init
302 pcibios_claim_console_setup(void)
304 struct pci_bus *b;
306 list_for_each_entry(b, &pci_root_buses, node)
307 pcibios_claim_one_bus(b);
310 void __init
311 common_init_pci(void)
313 struct pci_controller *hose;
314 struct list_head resources;
315 struct pci_bus *bus;
316 int next_busno;
317 int need_domain_info = 0;
318 u32 pci_mem_end;
319 u32 sg_base;
320 unsigned long end;
322 /* Scan all of the recorded PCI controllers. */
323 for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
324 sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0;
326 /* Adjust hose mem_space limit to prevent PCI allocations
327 in the iommu windows. */
328 pci_mem_end = min((u32)__direct_map_base, sg_base) - 1;
329 end = hose->mem_space->start + pci_mem_end;
330 if (hose->mem_space->end > end)
331 hose->mem_space->end = end;
333 INIT_LIST_HEAD(&resources);
334 pci_add_resource_offset(&resources, hose->io_space,
335 hose->io_space->start);
336 pci_add_resource_offset(&resources, hose->mem_space,
337 hose->mem_space->start);
339 bus = pci_scan_root_bus(NULL, next_busno, alpha_mv.pci_ops,
340 hose, &resources);
341 if (!bus)
342 continue;
343 hose->bus = bus;
344 hose->need_domain_info = need_domain_info;
345 next_busno = bus->busn_res.end + 1;
346 /* Don't allow 8-bit bus number overflow inside the hose -
347 reserve some space for bridges. */
348 if (next_busno > 224) {
349 next_busno = 0;
350 need_domain_info = 1;
354 pcibios_claim_console_setup();
356 pci_assign_unassigned_resources();
357 pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
358 for (hose = hose_head; hose; hose = hose->next) {
359 bus = hose->bus;
360 if (bus)
361 pci_bus_add_devices(bus);
366 struct pci_controller * __init
367 alloc_pci_controller(void)
369 struct pci_controller *hose;
371 hose = alloc_bootmem(sizeof(*hose));
373 *hose_tail = hose;
374 hose_tail = &hose->next;
376 return hose;
379 struct resource * __init
380 alloc_resource(void)
382 struct resource *res;
384 res = alloc_bootmem(sizeof(*res));
386 return res;
390 /* Provide information on locations of various I/O regions in physical
391 memory. Do this on a per-card basis so that we choose the right hose. */
393 asmlinkage long
394 sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn)
396 struct pci_controller *hose;
397 struct pci_dev *dev;
399 /* from hose or from bus.devfn */
400 if (which & IOBASE_FROM_HOSE) {
401 for(hose = hose_head; hose; hose = hose->next)
402 if (hose->index == bus) break;
403 if (!hose) return -ENODEV;
404 } else {
405 /* Special hook for ISA access. */
406 if (bus == 0 && dfn == 0) {
407 hose = pci_isa_hose;
408 } else {
409 dev = pci_get_bus_and_slot(bus, dfn);
410 if (!dev)
411 return -ENODEV;
412 hose = dev->sysdata;
413 pci_dev_put(dev);
417 switch (which & ~IOBASE_FROM_HOSE) {
418 case IOBASE_HOSE:
419 return hose->index;
420 case IOBASE_SPARSE_MEM:
421 return hose->sparse_mem_base;
422 case IOBASE_DENSE_MEM:
423 return hose->dense_mem_base;
424 case IOBASE_SPARSE_IO:
425 return hose->sparse_io_base;
426 case IOBASE_DENSE_IO:
427 return hose->dense_io_base;
428 case IOBASE_ROOT_BUS:
429 return hose->bus->number;
432 return -EOPNOTSUPP;
435 /* Destroy an __iomem token. Not copied from lib/iomap.c. */
437 void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
439 if (__is_mmio(addr))
440 iounmap(addr);
443 EXPORT_SYMBOL(pci_iounmap);
445 /* FIXME: Some boxes have multiple ISA bridges! */
446 struct pci_dev *isa_bridge;
447 EXPORT_SYMBOL(isa_bridge);