?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
rtl8192e: update for ndo_set_multicast_list removal.
[linux-2.6.git] / drivers / bluetooth / btuart_cs.c
blob526b61807d945dda8a6983758b348fe7ea0bd233
1 /*
2 *
3 * Driver for Bluetooth PCMCIA cards with HCI UART interface
4 *
5 * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org>
6 *
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation;
11 *
12 * Software distributed under the License is distributed on an "AS
13 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 * implied. See the License for the specific language governing
15 * rights and limitations under the License.
16 *
17 * The initial developer of the original code is David A. Hinds
18 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20 *
21 */
22
23 #include <linux/module.h>
24
25 #include <linux/kernel.h>
26 #include <linux/init.h>
27 #include <linux/slab.h>
28 #include <linux/types.h>
29 #include <linux/delay.h>
30 #include <linux/errno.h>
31 #include <linux/ptrace.h>
32 #include <linux/ioport.h>
33 #include <linux/spinlock.h>
34 #include <linux/moduleparam.h>
35
36 #include <linux/skbuff.h>
37 #include <linux/string.h>
38 #include <linux/serial.h>
39 #include <linux/serial_reg.h>
40 #include <linux/bitops.h>
41 #include <asm/system.h>
42 #include <asm/io.h>
43
44 #include <pcmcia/cistpl.h>
45 #include <pcmcia/ciscode.h>
46 #include <pcmcia/ds.h>
47 #include <pcmcia/cisreg.h>
48
49 #include <net/bluetooth/bluetooth.h>
50 #include <net/bluetooth/hci_core.h>
51
52
53
54 /* ======================== Module parameters ======================== */
55
56
57 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
58 MODULE_DESCRIPTION("Bluetooth driver for Bluetooth PCMCIA cards with HCI UART interface");
59 MODULE_LICENSE("GPL");
60
61
62
63 /* ======================== Local structures ======================== */
64
65
66 typedef struct btuart_info_t {
67 struct pcmcia_device *p_dev;
68
69 struct hci_dev *hdev;
70
71 spinlock_t lock; /* For serializing operations */
72
73 struct sk_buff_head txq;
74 unsigned long tx_state;
75
76 unsigned long rx_state;
77 unsigned long rx_count;
78 struct sk_buff *rx_skb;
79 } btuart_info_t;
80
81
82 static int btuart_config(struct pcmcia_device *link);
83 static void btuart_release(struct pcmcia_device *link);
84
85 static void btuart_detach(struct pcmcia_device *p_dev);
86
87
88 /* Maximum baud rate */
89 #define SPEED_MAX 115200
90
91 /* Default baud rate: 57600, 115200, 230400 or 460800 */
92 #define DEFAULT_BAUD_RATE 115200
93
94
95 /* Transmit states */
96 #define XMIT_SENDING 1
97 #define XMIT_WAKEUP 2
98 #define XMIT_WAITING 8
99
100 /* Receiver states */
101 #define RECV_WAIT_PACKET_TYPE 0
102 #define RECV_WAIT_EVENT_HEADER 1
103 #define RECV_WAIT_ACL_HEADER 2
104 #define RECV_WAIT_SCO_HEADER 3
105 #define RECV_WAIT_DATA 4
106
107
108
109 /* ======================== Interrupt handling ======================== */
110
111
112 static int btuart_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
113 {
114 int actual = 0;
115
116 /* Tx FIFO should be empty */
117 if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
118 return 0;
119
120 /* Fill FIFO with current frame */
121 while ((fifo_size-- > 0) && (actual < len)) {
122 /* Transmit next byte */
123 outb(buf[actual], iobase + UART_TX);
124 actual++;
125 }
126
127 return actual;
128 }
129
130
131 static void btuart_write_wakeup(btuart_info_t *info)
132 {
133 if (!info) {
134 BT_ERR("Unknown device");
135 return;
136 }
137
138 if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
139 set_bit(XMIT_WAKEUP, &(info->tx_state));
140 return;
141 }
142
143 do {
144 register unsigned int iobase = info->p_dev->resource[0]->start;
145 register struct sk_buff *skb;
146 register int len;
147
148 clear_bit(XMIT_WAKEUP, &(info->tx_state));
149
150 if (!pcmcia_dev_present(info->p_dev))
151 return;
152
153 if (!(skb = skb_dequeue(&(info->txq))))
154 break;
155
156 /* Send frame */
157 len = btuart_write(iobase, 16, skb->data, skb->len);
158 set_bit(XMIT_WAKEUP, &(info->tx_state));
159
160 if (len == skb->len) {
161 kfree_skb(skb);
162 } else {
163 skb_pull(skb, len);
164 skb_queue_head(&(info->txq), skb);
165 }
166
167 info->hdev->stat.byte_tx += len;
168
169 } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
170
171 clear_bit(XMIT_SENDING, &(info->tx_state));
172 }
173
174
175 static void btuart_receive(btuart_info_t *info)
176 {
177 unsigned int iobase;
178 int boguscount = 0;
179
180 if (!info) {
181 BT_ERR("Unknown device");
182 return;
183 }
184
185 iobase = info->p_dev->resource[0]->start;
186
187 do {
188 info->hdev->stat.byte_rx++;
189
190 /* Allocate packet */
191 if (info->rx_skb == NULL) {
192 info->rx_state = RECV_WAIT_PACKET_TYPE;
193 info->rx_count = 0;
194 if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
195 BT_ERR("Can't allocate mem for new packet");
196 return;
197 }
198 }
199
200 if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
201
202 info->rx_skb->dev = (void *) info->hdev;
203 bt_cb(info->rx_skb)->pkt_type = inb(iobase + UART_RX);
204
205 switch (bt_cb(info->rx_skb)->pkt_type) {
206
207 case HCI_EVENT_PKT:
208 info->rx_state = RECV_WAIT_EVENT_HEADER;
209 info->rx_count = HCI_EVENT_HDR_SIZE;
210 break;
211
212 case HCI_ACLDATA_PKT:
213 info->rx_state = RECV_WAIT_ACL_HEADER;
214 info->rx_count = HCI_ACL_HDR_SIZE;
215 break;
216
217 case HCI_SCODATA_PKT:
218 info->rx_state = RECV_WAIT_SCO_HEADER;
219 info->rx_count = HCI_SCO_HDR_SIZE;
220 break;
221
222 default:
223 /* Unknown packet */
224 BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
225 info->hdev->stat.err_rx++;
226 clear_bit(HCI_RUNNING, &(info->hdev->flags));
227
228 kfree_skb(info->rx_skb);
229 info->rx_skb = NULL;
230 break;
231
232 }
233
234 } else {
235
236 *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
237 info->rx_count--;
238
239 if (info->rx_count == 0) {
240
241 int dlen;
242 struct hci_event_hdr *eh;
243 struct hci_acl_hdr *ah;
244 struct hci_sco_hdr *sh;
245
246
247 switch (info->rx_state) {
248
249 case RECV_WAIT_EVENT_HEADER:
250 eh = hci_event_hdr(info->rx_skb);
251 info->rx_state = RECV_WAIT_DATA;
252 info->rx_count = eh->plen;
253 break;
254
255 case RECV_WAIT_ACL_HEADER:
256 ah = hci_acl_hdr(info->rx_skb);
257 dlen = __le16_to_cpu(ah->dlen);
258 info->rx_state = RECV_WAIT_DATA;
259 info->rx_count = dlen;
260 break;
261
262 case RECV_WAIT_SCO_HEADER:
263 sh = hci_sco_hdr(info->rx_skb);
264 info->rx_state = RECV_WAIT_DATA;
265 info->rx_count = sh->dlen;
266 break;
267
268 case RECV_WAIT_DATA:
269 hci_recv_frame(info->rx_skb);
270 info->rx_skb = NULL;
271 break;
272
273 }
274
275 }
276
277 }
278
279 /* Make sure we don't stay here too long */
280 if (boguscount++ > 16)
281 break;
282
283 } while (inb(iobase + UART_LSR) & UART_LSR_DR);
284 }
285
286
287 static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
288 {
289 btuart_info_t *info = dev_inst;
290 unsigned int iobase;
291 int boguscount = 0;
292 int iir, lsr;
293 irqreturn_t r = IRQ_NONE;
294
295 if (!info || !info->hdev)
296 /* our irq handler is shared */
297 return IRQ_NONE;
298
299 iobase = info->p_dev->resource[0]->start;
300
301 spin_lock(&(info->lock));
302
303 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
304 while (iir) {
305 r = IRQ_HANDLED;
306
307 /* Clear interrupt */
308 lsr = inb(iobase + UART_LSR);
309
310 switch (iir) {
311 case UART_IIR_RLSI:
312 BT_ERR("RLSI");
313 break;
314 case UART_IIR_RDI:
315 /* Receive interrupt */
316 btuart_receive(info);
317 break;
318 case UART_IIR_THRI:
319 if (lsr & UART_LSR_THRE) {
320 /* Transmitter ready for data */
321 btuart_write_wakeup(info);
322 }
323 break;
324 default:
325 BT_ERR("Unhandled IIR=%#x", iir);
326 break;
327 }
328
329 /* Make sure we don't stay here too long */
330 if (boguscount++ > 100)
331 break;
332
333 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
334
335 }
336
337 spin_unlock(&(info->lock));
338
339 return r;
340 }
341
342
343 static void btuart_change_speed(btuart_info_t *info, unsigned int speed)
344 {
345 unsigned long flags;
346 unsigned int iobase;
347 int fcr; /* FIFO control reg */
348 int lcr; /* Line control reg */
349 int divisor;
350
351 if (!info) {
352 BT_ERR("Unknown device");
353 return;
354 }
355
356 iobase = info->p_dev->resource[0]->start;
357
358 spin_lock_irqsave(&(info->lock), flags);
359
360 /* Turn off interrupts */
361 outb(0, iobase + UART_IER);
362
363 divisor = SPEED_MAX / speed;
364
365 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
366
367 /*
368 * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
369 * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
370 * about this timeout since it will always be fast enough.
371 */
372
373 if (speed < 38400)
374 fcr |= UART_FCR_TRIGGER_1;
375 else
376 fcr |= UART_FCR_TRIGGER_14;
377
378 /* Bluetooth cards use 8N1 */
379 lcr = UART_LCR_WLEN8;
380
381 outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
382 outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */
383 outb(divisor >> 8, iobase + UART_DLM);
384 outb(lcr, iobase + UART_LCR); /* Set 8N1 */
385 outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
386
387 /* Turn on interrupts */
388 outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
389
390 spin_unlock_irqrestore(&(info->lock), flags);
391 }
392
393
394
395 /* ======================== HCI interface ======================== */
396
397
398 static int btuart_hci_flush(struct hci_dev *hdev)
399 {
400 btuart_info_t *info = (btuart_info_t *)(hdev->driver_data);
401
402 /* Drop TX queue */
403 skb_queue_purge(&(info->txq));
404
405 return 0;
406 }
407
408
409 static int btuart_hci_open(struct hci_dev *hdev)
410 {
411 set_bit(HCI_RUNNING, &(hdev->flags));
412
413 return 0;
414 }
415
416
417 static int btuart_hci_close(struct hci_dev *hdev)
418 {
419 if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
420 return 0;
421
422 btuart_hci_flush(hdev);
423
424 return 0;
425 }
426
427
428 static int btuart_hci_send_frame(struct sk_buff *skb)
429 {
430 btuart_info_t *info;
431 struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
432
433 if (!hdev) {
434 BT_ERR("Frame for unknown HCI device (hdev=NULL)");
435 return -ENODEV;
436 }
437
438 info = (btuart_info_t *)(hdev->driver_data);
439
440 switch (bt_cb(skb)->pkt_type) {
441 case HCI_COMMAND_PKT:
442 hdev->stat.cmd_tx++;
443 break;
444 case HCI_ACLDATA_PKT:
445 hdev->stat.acl_tx++;
446 break;
447 case HCI_SCODATA_PKT:
448 hdev->stat.sco_tx++;
449 break;
450 };
451
452 /* Prepend skb with frame type */
453 memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
454 skb_queue_tail(&(info->txq), skb);
455
456 btuart_write_wakeup(info);
457
458 return 0;
459 }
460
461
462 static void btuart_hci_destruct(struct hci_dev *hdev)
463 {
464 }
465
466
467 static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
468 {
469 return -ENOIOCTLCMD;
470 }
471
472
473
474 /* ======================== Card services HCI interaction ======================== */
475
476
477 static int btuart_open(btuart_info_t *info)
478 {
479 unsigned long flags;
480 unsigned int iobase = info->p_dev->resource[0]->start;
481 struct hci_dev *hdev;
482
483 spin_lock_init(&(info->lock));
484
485 skb_queue_head_init(&(info->txq));
486
487 info->rx_state = RECV_WAIT_PACKET_TYPE;
488 info->rx_count = 0;
489 info->rx_skb = NULL;
490
491 /* Initialize HCI device */
492 hdev = hci_alloc_dev();
493 if (!hdev) {
494 BT_ERR("Can't allocate HCI device");
495 return -ENOMEM;
496 }
497
498 info->hdev = hdev;
499
500 hdev->bus = HCI_PCCARD;
501 hdev->driver_data = info;
502 SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
503
504 hdev->open = btuart_hci_open;
505 hdev->close = btuart_hci_close;
506 hdev->flush = btuart_hci_flush;
507 hdev->send = btuart_hci_send_frame;
508 hdev->destruct = btuart_hci_destruct;
509 hdev->ioctl = btuart_hci_ioctl;
510
511 hdev->owner = THIS_MODULE;
512
513 spin_lock_irqsave(&(info->lock), flags);
514
515 /* Reset UART */
516 outb(0, iobase + UART_MCR);
517
518 /* Turn off interrupts */
519 outb(0, iobase + UART_IER);
520
521 /* Initialize UART */
522 outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */
523 outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
524
525 /* Turn on interrupts */
526 // outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
527
528 spin_unlock_irqrestore(&(info->lock), flags);
529
530 btuart_change_speed(info, DEFAULT_BAUD_RATE);
531
532 /* Timeout before it is safe to send the first HCI packet */
533 msleep(1000);
534
535 /* Register HCI device */
536 if (hci_register_dev(hdev) < 0) {
537 BT_ERR("Can't register HCI device");
538 info->hdev = NULL;
539 hci_free_dev(hdev);
540 return -ENODEV;
541 }
542
543 return 0;
544 }
545
546
547 static int btuart_close(btuart_info_t *info)
548 {
549 unsigned long flags;
550 unsigned int iobase = info->p_dev->resource[0]->start;
551 struct hci_dev *hdev = info->hdev;
552
553 if (!hdev)
554 return -ENODEV;
555
556 btuart_hci_close(hdev);
557
558 spin_lock_irqsave(&(info->lock), flags);
559
560 /* Reset UART */
561 outb(0, iobase + UART_MCR);
562
563 /* Turn off interrupts */
564 outb(0, iobase + UART_IER);
565
566 spin_unlock_irqrestore(&(info->lock), flags);
567
568 if (hci_unregister_dev(hdev) < 0)
569 BT_ERR("Can't unregister HCI device %s", hdev->name);
570
571 hci_free_dev(hdev);
572
573 return 0;
574 }
575
576 static int btuart_probe(struct pcmcia_device *link)
577 {
578 btuart_info_t *info;
579
580 /* Create new info device */
581 info = kzalloc(sizeof(*info), GFP_KERNEL);
582 if (!info)
583 return -ENOMEM;
584
585 info->p_dev = link;
586 link->priv = info;
587
588 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
589 CONF_AUTO_SET_IO;
590
591 return btuart_config(link);
592 }
593
594
595 static void btuart_detach(struct pcmcia_device *link)
596 {
597 btuart_info_t *info = link->priv;
598
599 btuart_release(link);
600 kfree(info);
601 }
602
603 static int btuart_check_config(struct pcmcia_device *p_dev, void *priv_data)
604 {
605 int *try = priv_data;
606
607 if (try == 0)
608 p_dev->io_lines = 16;
609
610 if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0))
611 return -EINVAL;
612
613 p_dev->resource[0]->end = 8;
614 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
615 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
616
617 return pcmcia_request_io(p_dev);
618 }
619
620 static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
621 void *priv_data)
622 {
623 static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
624 int j;
625
626 if (p_dev->io_lines > 3)
627 return -ENODEV;
628
629 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
630 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
631 p_dev->resource[0]->end = 8;
632
633 for (j = 0; j < 5; j++) {
634 p_dev->resource[0]->start = base[j];
635 p_dev->io_lines = base[j] ? 16 : 3;
636 if (!pcmcia_request_io(p_dev))
637 return 0;
638 }
639 return -ENODEV;
640 }
641
642 static int btuart_config(struct pcmcia_device *link)
643 {
644 btuart_info_t *info = link->priv;
645 int i;
646 int try;
647
648 /* First pass: look for a config entry that looks normal.
649 Two tries: without IO aliases, then with aliases */
650 for (try = 0; try < 2; try++)
651 if (!pcmcia_loop_config(link, btuart_check_config, &try))
652 goto found_port;
653
654 /* Second pass: try to find an entry that isn't picky about
655 its base address, then try to grab any standard serial port
656 address, and finally try to get any free port. */
657 if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
658 goto found_port;
659
660 BT_ERR("No usable port range found");
661 goto failed;
662
663 found_port:
664 i = pcmcia_request_irq(link, btuart_interrupt);
665 if (i != 0)
666 goto failed;
667
668 i = pcmcia_enable_device(link);
669 if (i != 0)
670 goto failed;
671
672 if (btuart_open(info) != 0)
673 goto failed;
674
675 return 0;
676
677 failed:
678 btuart_release(link);
679 return -ENODEV;
680 }
681
682
683 static void btuart_release(struct pcmcia_device *link)
684 {
685 btuart_info_t *info = link->priv;
686
687 btuart_close(info);
688
689 pcmcia_disable_device(link);
690 }
691
692 static const struct pcmcia_device_id btuart_ids[] = {
693 /* don't use this driver. Use serial_cs + hci_uart instead */
694 PCMCIA_DEVICE_NULL
695 };
696 MODULE_DEVICE_TABLE(pcmcia, btuart_ids);
697
698 static struct pcmcia_driver btuart_driver = {
699 .owner = THIS_MODULE,
700 .name = "btuart_cs",
701 .probe = btuart_probe,
702 .remove = btuart_detach,
703 .id_table = btuart_ids,
704 };
705
706 static int __init init_btuart_cs(void)
707 {
708 return pcmcia_register_driver(&btuart_driver);
709 }
710
711
712 static void __exit exit_btuart_cs(void)
713 {
714 pcmcia_unregister_driver(&btuart_driver);
715 }
716
717 module_init(init_btuart_cs);
718 module_exit(exit_btuart_cs);
Linus' kernel tree