3 * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
5 * based on code for MX31ADS,
6 * Copyright (C) 2000 Deep Blue Solutions Ltd
7 * Copyright (C) 2002 Shane Nay (shane@minirl.com)
8 * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
21 #include <linux/gpio.h>
22 #include <linux/init.h>
23 #include <linux/platform_device.h>
24 #include <linux/serial_8250.h>
25 #include <linux/smsc911x.h>
26 #include <linux/types.h>
29 #include <asm/mach-types.h>
30 #include <asm/setup.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/irq.h>
33 #include <asm/mach/map.h>
34 #include <asm/mach/time.h>
36 #include <mach/clock.h>
37 #include <mach/common.h>
38 #include <mach/iomux-mx3.h>
39 #include <mach/memory.h>
41 #include "devices-imx31.h"
44 #define KZM_ARM11_IO_ADDRESS(x) ( \
45 IMX_IO_ADDRESS(x, MX31_CS4) ?: \
46 IMX_IO_ADDRESS(x, MX31_CS5) ?: \
50 * KZM-ARM11-01 Board Control Registers on FPGA
52 #define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
53 #define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
54 #define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
55 #define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
56 #define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
57 #define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
58 #define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
59 #define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
62 * External UART for touch panel on FPGA
64 #define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
66 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
68 * KZM-ARM11-01 has an external UART on FPGA
70 static struct plat_serial8250_port serial_platform_data
[] = {
72 .membase
= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550
),
73 .mapbase
= KZM_ARM11_16550
,
74 .irq
= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1
),
75 .irqflags
= IRQ_TYPE_EDGE_RISING
,
79 .flags
= UPF_BOOT_AUTOCONF
| UPF_SKIP_TEST
|
85 static struct resource serial8250_resources
[] = {
87 .start
= KZM_ARM11_16550
,
88 .end
= KZM_ARM11_16550
+ 0x10,
89 .flags
= IORESOURCE_MEM
,
92 .start
= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1
),
93 .end
= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1
),
94 .flags
= IORESOURCE_IRQ
,
98 static struct platform_device serial_device
= {
100 .id
= PLAT8250_DEV_PLATFORM
,
102 .platform_data
= serial_platform_data
,
104 .num_resources
= ARRAY_SIZE(serial8250_resources
),
105 .resource
= serial8250_resources
,
108 static int __init
kzm_init_ext_uart(void)
113 * GPIO 1-1: external UART interrupt line
115 mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1
, IOMUX_CONFIG_GPIO
));
116 gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1
), "ext-uart-int");
117 gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1
));
120 * Unmask UART interrupt
122 tmp
= __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1
));
124 __raw_writeb(tmp
, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1
));
126 return platform_device_register(&serial_device
);
129 static inline int kzm_init_ext_uart(void)
138 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
139 static struct smsc911x_platform_config kzm_smsc9118_config
= {
140 .phy_interface
= PHY_INTERFACE_MODE_MII
,
141 .irq_polarity
= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH
,
142 .irq_type
= SMSC911X_IRQ_TYPE_PUSH_PULL
,
143 .flags
= SMSC911X_USE_32BIT
| SMSC911X_SAVE_MAC_ADDRESS
,
146 static struct resource kzm_smsc9118_resources
[] = {
148 .start
= MX31_CS5_BASE_ADDR
,
149 .end
= MX31_CS5_BASE_ADDR
+ SZ_128K
- 1,
150 .flags
= IORESOURCE_MEM
,
153 .start
= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2
),
154 .end
= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2
),
155 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE
,
159 static struct platform_device kzm_smsc9118_device
= {
162 .num_resources
= ARRAY_SIZE(kzm_smsc9118_resources
),
163 .resource
= kzm_smsc9118_resources
,
165 .platform_data
= &kzm_smsc9118_config
,
169 static int __init
kzm_init_smsc9118(void)
172 * GPIO 1-2: SMSC9118 interrupt line
174 mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2
, IOMUX_CONFIG_GPIO
));
175 gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2
), "smsc9118-int");
176 gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2
));
178 return platform_device_register(&kzm_smsc9118_device
);
181 static inline int kzm_init_smsc9118(void)
187 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
188 static const struct imxuart_platform_data uart_pdata __initconst
= {
189 .flags
= IMXUART_HAVE_RTSCTS
,
192 static void __init
kzm_init_imx_uart(void)
194 imx31_add_imx_uart0(&uart_pdata
);
195 imx31_add_imx_uart1(&uart_pdata
);
198 static inline void kzm_init_imx_uart(void)
203 static int kzm_pins
[] __initdata
= {
208 MX31_PIN_DCD_DCE1__DCD_DCE1
,
209 MX31_PIN_RI_DCE1__RI_DCE1
,
210 MX31_PIN_DSR_DCE1__DSR_DCE1
,
211 MX31_PIN_DTR_DCE1__DTR_DCE1
,
216 MX31_PIN_DCD_DTE1__DCD_DTE2
,
217 MX31_PIN_RI_DTE1__RI_DTE2
,
218 MX31_PIN_DSR_DTE1__DSR_DTE2
,
219 MX31_PIN_DTR_DTE1__DTR_DTE2
,
223 * Board specific initialization.
225 static void __init
kzm_board_init(void)
227 mxc_iomux_setup_multiple_pins(kzm_pins
,
228 ARRAY_SIZE(kzm_pins
), "kzm");
233 pr_info("Clock input source is 26MHz\n");
237 * This structure defines static mappings for the kzm-arm11-01 board.
239 static struct map_desc kzm_io_desc
[] __initdata
= {
241 .virtual = MX31_CS4_BASE_ADDR_VIRT
,
242 .pfn
= __phys_to_pfn(MX31_CS4_BASE_ADDR
),
243 .length
= MX31_CS4_SIZE
,
247 .virtual = MX31_CS5_BASE_ADDR_VIRT
,
248 .pfn
= __phys_to_pfn(MX31_CS5_BASE_ADDR
),
249 .length
= MX31_CS5_SIZE
,
255 * Set up static virtual mappings.
257 static void __init
kzm_map_io(void)
260 iotable_init(kzm_io_desc
, ARRAY_SIZE(kzm_io_desc
));
263 static void __init
kzm_timer_init(void)
265 mx31_clocks_init(26000000);
268 static struct sys_timer kzm_timer
= {
269 .init
= kzm_timer_init
,
273 * The following uses standard kernel macros define in arch.h in order to
274 * initialize __mach_desc_KZM_ARM11_01 data structure.
276 MACHINE_START(KZM_ARM11_01
, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
277 .boot_params
= MX3x_PHYS_OFFSET
+ 0x100,
278 .map_io
= kzm_map_io
,
279 .init_irq
= mx31_init_irq
,
280 .init_machine
= kzm_board_init
,