ftrace: Add selftest to test function trace recursion protection

[linux-2.6.git] / drivers / edac / i7300_edac.c

/*
 * Intel 7300 class Memory Controllers kernel module (Clarksboro)
 *
 * This file may be distributed under the terms of the
 * GNU General Public License version 2 only.
 *
 * Copyright (c) 2010 by:
 *       Mauro Carvalho Chehab <mchehab@redhat.com>
 *
 * Red Hat Inc. http://www.redhat.com
 *
 * Intel 7300 Chipset Memory Controller Hub (MCH) - Datasheet
 *      http://www.intel.com/Assets/PDF/datasheet/318082.pdf
 *
 * TODO: The chipset allow checking for PCI Express errors also. Currently,
 *       the driver covers only memory error errors
 *
 * This driver uses "csrows" EDAC attribute to represent DIMM slot#
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/edac.h>
#include <linux/mmzone.h>

#include "edac_core.h"

/*
 * Alter this version for the I7300 module when modifications are made
 */
#define I7300_REVISION    " Ver: 1.0.0"

#define EDAC_MOD_STR      "i7300_edac"

#define i7300_printk(level, fmt, arg...) \
        edac_printk(level, "i7300", fmt, ##arg)

#define i7300_mc_printk(mci, level, fmt, arg...) \
        edac_mc_chipset_printk(mci, level, "i7300", fmt, ##arg)

/***********************************************
 * i7300 Limit constants Structs and static vars
 ***********************************************/

/*
 * Memory topology is organized as:
 *      Branch 0 - 2 channels: channels 0 and 1 (FDB0 PCI dev 21.0)
 *      Branch 1 - 2 channels: channels 2 and 3 (FDB1 PCI dev 22.0)
 * Each channel can have to 8 DIMM sets (called as SLOTS)
 * Slots should generally be filled in pairs
 *      Except on Single Channel mode of operation
 *              just slot 0/channel0 filled on this mode
 *      On normal operation mode, the two channels on a branch should be
 *              filled together for the same SLOT#
 * When in mirrored mode, Branch 1 replicate memory at Branch 0, so, the four
 *              channels on both branches should be filled
 */

/* Limits for i7300 */
#define MAX_SLOTS               8
#define MAX_BRANCHES            2
#define MAX_CH_PER_BRANCH       2
#define MAX_CHANNELS            (MAX_CH_PER_BRANCH * MAX_BRANCHES)
#define MAX_MIR                 3

#define to_channel(ch, branch)  ((((branch)) << 1) | (ch))

#define to_csrow(slot, ch, branch)                                      \
                (to_channel(ch, branch) | ((slot) << 2))

/* Device name and register DID (Device ID) */
struct i7300_dev_info {
        const char *ctl_name;   /* name for this device */
        u16 fsb_mapping_errors; /* DID for the branchmap,control */
};

/* Table of devices attributes supported by this driver */
static const struct i7300_dev_info i7300_devs[] = {
        {
                .ctl_name = "I7300",
                .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I7300_MCH_ERR,
        },
};

struct i7300_dimm_info {
        int megabytes;          /* size, 0 means not present  */
};

/* driver private data structure */
struct i7300_pvt {
        struct pci_dev *pci_dev_16_0_fsb_ctlr;          /* 16.0 */
        struct pci_dev *pci_dev_16_1_fsb_addr_map;      /* 16.1 */
        struct pci_dev *pci_dev_16_2_fsb_err_regs;      /* 16.2 */
        struct pci_dev *pci_dev_2x_0_fbd_branch[MAX_BRANCHES];  /* 21.0  and 22.0 */

        u16 tolm;                               /* top of low memory */
        u64 ambase;                             /* AMB BAR */

        u32 mc_settings;                        /* Report several settings */
        u32 mc_settings_a;

        u16 mir[MAX_MIR];                       /* Memory Interleave Reg*/

        u16 mtr[MAX_SLOTS][MAX_BRANCHES];       /* Memory Technlogy Reg */
        u16 ambpresent[MAX_CHANNELS];           /* AMB present regs */

        /* DIMM information matrix, allocating architecture maximums */
        struct i7300_dimm_info dimm_info[MAX_SLOTS][MAX_CHANNELS];

        /* Temporary buffer for use when preparing error messages */
        char *tmp_prt_buffer;
};

/* FIXME: Why do we need to have this static? */
static struct edac_pci_ctl_info *i7300_pci;

/***************************************************
 * i7300 Register definitions for memory enumeration
 ***************************************************/

/*
 * Device 16,
 * Function 0: System Address (not documented)
 * Function 1: Memory Branch Map, Control, Errors Register
 */

        /* OFFSETS for Function 0 */
#define AMBASE                  0x48 /* AMB Mem Mapped Reg Region Base */
#define MAXCH                   0x56 /* Max Channel Number */
#define MAXDIMMPERCH            0x57 /* Max DIMM PER Channel Number */

        /* OFFSETS for Function 1 */
#define MC_SETTINGS             0x40
  #define IS_MIRRORED(mc)               ((mc) & (1 << 16))
  #define IS_ECC_ENABLED(mc)            ((mc) & (1 << 5))
  #define IS_RETRY_ENABLED(mc)          ((mc) & (1 << 31))
  #define IS_SCRBALGO_ENHANCED(mc)      ((mc) & (1 << 8))

#define MC_SETTINGS_A           0x58
  #define IS_SINGLE_MODE(mca)           ((mca) & (1 << 14))

#define TOLM                    0x6C

#define MIR0                    0x80
#define MIR1                    0x84
#define MIR2                    0x88

/*
 * Note: Other Intel EDAC drivers use AMBPRESENT to identify if the available
 * memory. From datasheet item 7.3.1 (FB-DIMM technology & organization), it
 * seems that we cannot use this information directly for the same usage.
 * Each memory slot may have up to 2 AMB interfaces, one for income and another
 * for outcome interface to the next slot.
 * For now, the driver just stores the AMB present registers, but rely only at
 * the MTR info to detect memory.
 * Datasheet is also not clear about how to map each AMBPRESENT registers to
 * one of the 4 available channels.
 */
#define AMBPRESENT_0    0x64
#define AMBPRESENT_1    0x66

static const u16 mtr_regs[MAX_SLOTS] = {
        0x80, 0x84, 0x88, 0x8c,
        0x82, 0x86, 0x8a, 0x8e
};

/*
 * Defines to extract the vaious fields from the
 *      MTRx - Memory Technology Registers
 */
#define MTR_DIMMS_PRESENT(mtr)          ((mtr) & (1 << 8))
#define MTR_DIMMS_ETHROTTLE(mtr)        ((mtr) & (1 << 7))
#define MTR_DRAM_WIDTH(mtr)             (((mtr) & (1 << 6)) ? 8 : 4)
#define MTR_DRAM_BANKS(mtr)             (((mtr) & (1 << 5)) ? 8 : 4)
#define MTR_DIMM_RANKS(mtr)             (((mtr) & (1 << 4)) ? 1 : 0)
#define MTR_DIMM_ROWS(mtr)              (((mtr) >> 2) & 0x3)
#define MTR_DRAM_BANKS_ADDR_BITS        2
#define MTR_DIMM_ROWS_ADDR_BITS(mtr)    (MTR_DIMM_ROWS(mtr) + 13)
#define MTR_DIMM_COLS(mtr)              ((mtr) & 0x3)
#define MTR_DIMM_COLS_ADDR_BITS(mtr)    (MTR_DIMM_COLS(mtr) + 10)

#ifdef CONFIG_EDAC_DEBUG
/* MTR NUMROW */
static const char *numrow_toString[] = {
        "8,192 - 13 rows",
        "16,384 - 14 rows",
        "32,768 - 15 rows",
        "65,536 - 16 rows"
};

/* MTR NUMCOL */
static const char *numcol_toString[] = {
        "1,024 - 10 columns",
        "2,048 - 11 columns",
        "4,096 - 12 columns",
        "reserved"
};
#endif

/************************************************
 * i7300 Register definitions for error detection
 ************************************************/

/*
 * Device 16.1: FBD Error Registers
 */
#define FERR_FAT_FBD    0x98
static const char *ferr_fat_fbd_name[] = {
        [22] = "Non-Redundant Fast Reset Timeout",
        [2]  = ">Tmid Thermal event with intelligent throttling disabled",
        [1]  = "Memory or FBD configuration CRC read error",
        [0]  = "Memory Write error on non-redundant retry or "
               "FBD configuration Write error on retry",
};
#define GET_FBD_FAT_IDX(fbderr) (fbderr & (3 << 28))
#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))

#define FERR_NF_FBD     0xa0
static const char *ferr_nf_fbd_name[] = {
        [24] = "DIMM-Spare Copy Completed",
        [23] = "DIMM-Spare Copy Initiated",
        [22] = "Redundant Fast Reset Timeout",
        [21] = "Memory Write error on redundant retry",
        [18] = "SPD protocol Error",
        [17] = "FBD Northbound parity error on FBD Sync Status",
        [16] = "Correctable Patrol Data ECC",
        [15] = "Correctable Resilver- or Spare-Copy Data ECC",
        [14] = "Correctable Mirrored Demand Data ECC",
        [13] = "Correctable Non-Mirrored Demand Data ECC",
        [11] = "Memory or FBD configuration CRC read error",
        [10] = "FBD Configuration Write error on first attempt",
        [9]  = "Memory Write error on first attempt",
        [8]  = "Non-Aliased Uncorrectable Patrol Data ECC",
        [7]  = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
        [6]  = "Non-Aliased Uncorrectable Mirrored Demand Data ECC",
        [5]  = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC",
        [4]  = "Aliased Uncorrectable Patrol Data ECC",
        [3]  = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
        [2]  = "Aliased Uncorrectable Mirrored Demand Data ECC",
        [1]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
        [0]  = "Uncorrectable Data ECC on Replay",
};
#define GET_FBD_NF_IDX(fbderr)  (fbderr & (3 << 28))
#define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\
                              (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\
                              (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\
                              (1 << 9)  | (1 << 8)  | (1 << 7)  | (1 << 6)  |\
                              (1 << 5)  | (1 << 4)  | (1 << 3)  | (1 << 2)  |\
                              (1 << 1)  | (1 << 0))

#define EMASK_FBD       0xa8
#define EMASK_FBD_ERR_MASK ((1 << 27) | (1 << 26) | (1 << 25) | (1 << 24) |\
                            (1 << 22) | (1 << 21) | (1 << 20) | (1 << 19) |\
                            (1 << 18) | (1 << 17) | (1 << 16) | (1 << 14) |\
                            (1 << 13) | (1 << 12) | (1 << 11) | (1 << 10) |\
                            (1 << 9)  | (1 << 8)  | (1 << 7)  | (1 << 6)  |\
                            (1 << 5)  | (1 << 4)  | (1 << 3)  | (1 << 2)  |\
                            (1 << 1)  | (1 << 0))

/*
 * Device 16.2: Global Error Registers
 */

#define FERR_GLOBAL_HI  0x48
static const char *ferr_global_hi_name[] = {
        [3] = "FSB 3 Fatal Error",
        [2] = "FSB 2 Fatal Error",
        [1] = "FSB 1 Fatal Error",
        [0] = "FSB 0 Fatal Error",
};
#define ferr_global_hi_is_fatal(errno)  1

#define FERR_GLOBAL_LO  0x40
static const char *ferr_global_lo_name[] = {
        [31] = "Internal MCH Fatal Error",
        [30] = "Intel QuickData Technology Device Fatal Error",
        [29] = "FSB1 Fatal Error",
        [28] = "FSB0 Fatal Error",
        [27] = "FBD Channel 3 Fatal Error",
        [26] = "FBD Channel 2 Fatal Error",
        [25] = "FBD Channel 1 Fatal Error",
        [24] = "FBD Channel 0 Fatal Error",
        [23] = "PCI Express Device 7Fatal Error",
        [22] = "PCI Express Device 6 Fatal Error",
        [21] = "PCI Express Device 5 Fatal Error",
        [20] = "PCI Express Device 4 Fatal Error",
        [19] = "PCI Express Device 3 Fatal Error",
        [18] = "PCI Express Device 2 Fatal Error",
        [17] = "PCI Express Device 1 Fatal Error",
        [16] = "ESI Fatal Error",
        [15] = "Internal MCH Non-Fatal Error",
        [14] = "Intel QuickData Technology Device Non Fatal Error",
        [13] = "FSB1 Non-Fatal Error",
        [12] = "FSB 0 Non-Fatal Error",
        [11] = "FBD Channel 3 Non-Fatal Error",
        [10] = "FBD Channel 2 Non-Fatal Error",
        [9]  = "FBD Channel 1 Non-Fatal Error",
        [8]  = "FBD Channel 0 Non-Fatal Error",
        [7]  = "PCI Express Device 7 Non-Fatal Error",
        [6]  = "PCI Express Device 6 Non-Fatal Error",
        [5]  = "PCI Express Device 5 Non-Fatal Error",
        [4]  = "PCI Express Device 4 Non-Fatal Error",
        [3]  = "PCI Express Device 3 Non-Fatal Error",
        [2]  = "PCI Express Device 2 Non-Fatal Error",
        [1]  = "PCI Express Device 1 Non-Fatal Error",
        [0]  = "ESI Non-Fatal Error",
};
#define ferr_global_lo_is_fatal(errno)  ((errno < 16) ? 0 : 1)

#define NRECMEMA        0xbe
  #define NRECMEMA_BANK(v)      (((v) >> 12) & 7)
  #define NRECMEMA_RANK(v)      (((v) >> 8) & 15)

#define NRECMEMB        0xc0
  #define NRECMEMB_IS_WR(v)     ((v) & (1 << 31))
  #define NRECMEMB_CAS(v)       (((v) >> 16) & 0x1fff)
  #define NRECMEMB_RAS(v)       ((v) & 0xffff)

#define REDMEMA         0xdc

#define REDMEMB         0x7c
  #define IS_SECOND_CH(v)       ((v) * (1 << 17))

#define RECMEMA         0xe0
  #define RECMEMA_BANK(v)       (((v) >> 12) & 7)
  #define RECMEMA_RANK(v)       (((v) >> 8) & 15)

#define RECMEMB         0xe4
  #define RECMEMB_IS_WR(v)      ((v) & (1 << 31))
  #define RECMEMB_CAS(v)        (((v) >> 16) & 0x1fff)
  #define RECMEMB_RAS(v)        ((v) & 0xffff)

/********************************************
 * i7300 Functions related to error detection
 ********************************************/

/**
 * get_err_from_table() - Gets the error message from a table
 * @table:      table name (array of char *)
 * @size:       number of elements at the table
 * @pos:        position of the element to be returned
 *
 * This is a small routine that gets the pos-th element of a table. If the
 * element doesn't exist (or it is empty), it returns "reserved".
 * Instead of calling it directly, the better is to call via the macro
 * GET_ERR_FROM_TABLE(), that automatically checks the table size via
 * ARRAY_SIZE() macro
 */
static const char *get_err_from_table(const char *table[], int size, int pos)
{
        if (unlikely(pos >= size))
                return "Reserved";

        if (unlikely(!table[pos]))
                return "Reserved";

        return table[pos];
}

#define GET_ERR_FROM_TABLE(table, pos)                          \
        get_err_from_table(table, ARRAY_SIZE(table), pos)

/**
 * i7300_process_error_global() - Retrieve the hardware error information from
 *                                the hardware global error registers and
 *                                sends it to dmesg
 * @mci: struct mem_ctl_info pointer
 */
static void i7300_process_error_global(struct mem_ctl_info *mci)
{
        struct i7300_pvt *pvt;
        u32 errnum, error_reg;
        unsigned long errors;
        const char *specific;
        bool is_fatal;

        pvt = mci->pvt_info;

        /* read in the 1st FATAL error register */
        pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
                              FERR_GLOBAL_HI, &error_reg);
        if (unlikely(error_reg)) {
                errors = error_reg;
                errnum = find_first_bit(&errors,
                                        ARRAY_SIZE(ferr_global_hi_name));
                specific = GET_ERR_FROM_TABLE(ferr_global_hi_name, errnum);
                is_fatal = ferr_global_hi_is_fatal(errnum);

                /* Clear the error bit */
                pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
                                       FERR_GLOBAL_HI, error_reg);

                goto error_global;
        }

        pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
                              FERR_GLOBAL_LO, &error_reg);
        if (unlikely(error_reg)) {
                errors = error_reg;
                errnum = find_first_bit(&errors,
                                        ARRAY_SIZE(ferr_global_lo_name));
                specific = GET_ERR_FROM_TABLE(ferr_global_lo_name, errnum);
                is_fatal = ferr_global_lo_is_fatal(errnum);

                /* Clear the error bit */
                pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
                                       FERR_GLOBAL_LO, error_reg);

                goto error_global;
        }
        return;

error_global:
        i7300_mc_printk(mci, KERN_EMERG, "%s misc error: %s\n",
                        is_fatal ? "Fatal" : "NOT fatal", specific);
}

/**
 * i7300_process_fbd_error() - Retrieve the hardware error information from
 *                             the FBD error registers and sends it via
 *                             EDAC error API calls
 * @mci: struct mem_ctl_info pointer
 */
static void i7300_process_fbd_error(struct mem_ctl_info *mci)
{
        struct i7300_pvt *pvt;
        u32 errnum, value, error_reg;
        u16 val16;
        unsigned branch, channel, bank, rank, cas, ras;
        u32 syndrome;

        unsigned long errors;
        const char *specific;
        bool is_wr;

        pvt = mci->pvt_info;

        /* read in the 1st FATAL error register */
        pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                              FERR_FAT_FBD, &error_reg);
        if (unlikely(error_reg & FERR_FAT_FBD_ERR_MASK)) {
                errors = error_reg & FERR_FAT_FBD_ERR_MASK ;
                errnum = find_first_bit(&errors,
                                        ARRAY_SIZE(ferr_fat_fbd_name));
                specific = GET_ERR_FROM_TABLE(ferr_fat_fbd_name, errnum);
                branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;

                pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
                                     NRECMEMA, &val16);
                bank = NRECMEMA_BANK(val16);
                rank = NRECMEMA_RANK(val16);

                pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                                NRECMEMB, &value);
                is_wr = NRECMEMB_IS_WR(value);
                cas = NRECMEMB_CAS(value);
                ras = NRECMEMB_RAS(value);

                /* Clean the error register */
                pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                                FERR_FAT_FBD, error_reg);

                snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
                         "Bank=%d RAS=%d CAS=%d Err=0x%lx (%s))",
                         bank, ras, cas, errors, specific);

                edac_mc_handle_error(HW_EVENT_ERR_FATAL, mci, 0, 0, 0,
                                     branch, -1, rank,
                                     is_wr ? "Write error" : "Read error",
                                     pvt->tmp_prt_buffer, NULL);

        }

        /* read in the 1st NON-FATAL error register */
        pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                              FERR_NF_FBD, &error_reg);
        if (unlikely(error_reg & FERR_NF_FBD_ERR_MASK)) {
                errors = error_reg & FERR_NF_FBD_ERR_MASK;
                errnum = find_first_bit(&errors,
                                        ARRAY_SIZE(ferr_nf_fbd_name));
                specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
                branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;

                pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                        REDMEMA, &syndrome);

                pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
                                     RECMEMA, &val16);
                bank = RECMEMA_BANK(val16);
                rank = RECMEMA_RANK(val16);

                pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                                RECMEMB, &value);
                is_wr = RECMEMB_IS_WR(value);
                cas = RECMEMB_CAS(value);
                ras = RECMEMB_RAS(value);

                pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                                     REDMEMB, &value);
                channel = (branch << 1);
                if (IS_SECOND_CH(value))
                        channel++;

                /* Clear the error bit */
                pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                                FERR_NF_FBD, error_reg);

                /* Form out message */
                snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
                         "DRAM-Bank=%d RAS=%d CAS=%d, Err=0x%lx (%s))",
                         bank, ras, cas, errors, specific);

                edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 0, 0,
                                     syndrome,
                                     branch >> 1, channel % 2, rank,
                                     is_wr ? "Write error" : "Read error",
                                     pvt->tmp_prt_buffer, NULL);
        }
        return;
}

/**
 * i7300_check_error() - Calls the error checking subroutines
 * @mci: struct mem_ctl_info pointer
 */
static void i7300_check_error(struct mem_ctl_info *mci)
{
        i7300_process_error_global(mci);
        i7300_process_fbd_error(mci);
};

/**
 * i7300_clear_error() - Clears the error registers
 * @mci: struct mem_ctl_info pointer
 */
static void i7300_clear_error(struct mem_ctl_info *mci)
{
        struct i7300_pvt *pvt = mci->pvt_info;
        u32 value;
        /*
         * All error values are RWC - we need to read and write 1 to the
         * bit that we want to cleanup
         */

        /* Clear global error registers */
        pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
                              FERR_GLOBAL_HI, &value);
        pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
                              FERR_GLOBAL_HI, value);

        pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
                              FERR_GLOBAL_LO, &value);
        pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
                              FERR_GLOBAL_LO, value);

        /* Clear FBD error registers */
        pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                              FERR_FAT_FBD, &value);
        pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                              FERR_FAT_FBD, value);

        pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                              FERR_NF_FBD, &value);
        pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                              FERR_NF_FBD, value);
}

/**
 * i7300_enable_error_reporting() - Enable the memory reporting logic at the
 *                                  hardware
 * @mci: struct mem_ctl_info pointer
 */
static void i7300_enable_error_reporting(struct mem_ctl_info *mci)
{
        struct i7300_pvt *pvt = mci->pvt_info;
        u32 fbd_error_mask;

        /* Read the FBD Error Mask Register */
        pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                              EMASK_FBD, &fbd_error_mask);

        /* Enable with a '0' */
        fbd_error_mask &= ~(EMASK_FBD_ERR_MASK);

        pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
                               EMASK_FBD, fbd_error_mask);
}

/************************************************
 * i7300 Functions related to memory enumberation
 ************************************************/

/**
 * decode_mtr() - Decodes the MTR descriptor, filling the edac structs
 * @pvt: pointer to the private data struct used by i7300 driver
 * @slot: DIMM slot (0 to 7)
 * @ch: Channel number within the branch (0 or 1)
 * @branch: Branch number (0 or 1)
 * @dinfo: Pointer to DIMM info where dimm size is stored
 * @p_csrow: Pointer to the struct csrow_info that corresponds to that element
 */
static int decode_mtr(struct i7300_pvt *pvt,
                      int slot, int ch, int branch,
                      struct i7300_dimm_info *dinfo,
                      struct dimm_info *dimm)
{
        int mtr, ans, addrBits, channel;

        channel = to_channel(ch, branch);

        mtr = pvt->mtr[slot][branch];
        ans = MTR_DIMMS_PRESENT(mtr) ? 1 : 0;

        debugf2("\tMTR%d CH%d: DIMMs are %s (mtr)\n",
                slot, channel,
                ans ? "Present" : "NOT Present");

        /* Determine if there is a DIMM present in this DIMM slot */
        if (!ans)
                return 0;

        /* Start with the number of bits for a Bank
        * on the DRAM */
        addrBits = MTR_DRAM_BANKS_ADDR_BITS;
        /* Add thenumber of ROW bits */
        addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
        /* add the number of COLUMN bits */
        addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
        /* add the number of RANK bits */
        addrBits += MTR_DIMM_RANKS(mtr);

        addrBits += 6;  /* add 64 bits per DIMM */
        addrBits -= 20; /* divide by 2^^20 */
        addrBits -= 3;  /* 8 bits per bytes */

        dinfo->megabytes = 1 << addrBits;

        debugf2("\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));

        debugf2("\t\tELECTRICAL THROTTLING is %s\n",
                MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled");

        debugf2("\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
        debugf2("\t\tNUMRANK: %s\n", MTR_DIMM_RANKS(mtr) ? "double" : "single");
        debugf2("\t\tNUMROW: %s\n", numrow_toString[MTR_DIMM_ROWS(mtr)]);
        debugf2("\t\tNUMCOL: %s\n", numcol_toString[MTR_DIMM_COLS(mtr)]);
        debugf2("\t\tSIZE: %d MB\n", dinfo->megabytes);

        /*
         * The type of error detection actually depends of the
         * mode of operation. When it is just one single memory chip, at
         * socket 0, channel 0, it uses 8-byte-over-32-byte SECDED+ code.
         * In normal or mirrored mode, it uses Lockstep mode,
         * with the possibility of using an extended algorithm for x8 memories
         * See datasheet Sections 7.3.6 to 7.3.8
         */

        dimm->nr_pages = MiB_TO_PAGES(dinfo->megabytes);
        dimm->grain = 8;
        dimm->mtype = MEM_FB_DDR2;
        if (IS_SINGLE_MODE(pvt->mc_settings_a)) {
                dimm->edac_mode = EDAC_SECDED;
                debugf2("\t\tECC code is 8-byte-over-32-byte SECDED+ code\n");
        } else {
                debugf2("\t\tECC code is on Lockstep mode\n");
                if (MTR_DRAM_WIDTH(mtr) == 8)
                        dimm->edac_mode = EDAC_S8ECD8ED;
                else
                        dimm->edac_mode = EDAC_S4ECD4ED;
        }

        /* ask what device type on this row */
        if (MTR_DRAM_WIDTH(mtr) == 8) {
                debugf2("\t\tScrub algorithm for x8 is on %s mode\n",
                        IS_SCRBALGO_ENHANCED(pvt->mc_settings) ?
                                            "enhanced" : "normal");

                dimm->dtype = DEV_X8;
        } else
                dimm->dtype = DEV_X4;

        return mtr;
}

/**
 * print_dimm_size() - Prints dump of the memory organization
 * @pvt: pointer to the private data struct used by i7300 driver
 *
 * Useful for debug. If debug is disabled, this routine do nothing
 */
static void print_dimm_size(struct i7300_pvt *pvt)
{
#ifdef CONFIG_EDAC_DEBUG
        struct i7300_dimm_info *dinfo;
        char *p;
        int space, n;
        int channel, slot;

        space = PAGE_SIZE;
        p = pvt->tmp_prt_buffer;

        n = snprintf(p, space, "              ");
        p += n;
        space -= n;
        for (channel = 0; channel < MAX_CHANNELS; channel++) {
                n = snprintf(p, space, "channel %d | ", channel);
                p += n;
                space -= n;
        }
        debugf2("%s\n", pvt->tmp_prt_buffer);
        p = pvt->tmp_prt_buffer;
        space = PAGE_SIZE;
        n = snprintf(p, space, "-------------------------------"
                               "------------------------------");
        p += n;
        space -= n;
        debugf2("%s\n", pvt->tmp_prt_buffer);
        p = pvt->tmp_prt_buffer;
        space = PAGE_SIZE;

        for (slot = 0; slot < MAX_SLOTS; slot++) {
                n = snprintf(p, space, "csrow/SLOT %d  ", slot);
                p += n;
                space -= n;

                for (channel = 0; channel < MAX_CHANNELS; channel++) {
                        dinfo = &pvt->dimm_info[slot][channel];
                        n = snprintf(p, space, "%4d MB   | ", dinfo->megabytes);
                        p += n;
                        space -= n;
                }

                debugf2("%s\n", pvt->tmp_prt_buffer);
                p = pvt->tmp_prt_buffer;
                space = PAGE_SIZE;
        }

        n = snprintf(p, space, "-------------------------------"
                               "------------------------------");
        p += n;
        space -= n;
        debugf2("%s\n", pvt->tmp_prt_buffer);
        p = pvt->tmp_prt_buffer;
        space = PAGE_SIZE;
#endif
}

/**
 * i7300_init_csrows() - Initialize the 'csrows' table within
 *                       the mci control structure with the
 *                       addressing of memory.
 * @mci: struct mem_ctl_info pointer
 */
static int i7300_init_csrows(struct mem_ctl_info *mci)
{
        struct i7300_pvt *pvt;
        struct i7300_dimm_info *dinfo;
        int rc = -ENODEV;
        int mtr;
        int ch, branch, slot, channel;
        struct dimm_info *dimm;

        pvt = mci->pvt_info;

        debugf2("Memory Technology Registers:\n");

        /* Get the AMB present registers for the four channels */
        for (branch = 0; branch < MAX_BRANCHES; branch++) {
                /* Read and dump branch 0's MTRs */
                channel = to_channel(0, branch);
                pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
                                     AMBPRESENT_0,
                                &pvt->ambpresent[channel]);
                debugf2("\t\tAMB-present CH%d = 0x%x:\n",
                        channel, pvt->ambpresent[channel]);

                channel = to_channel(1, branch);
                pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
                                     AMBPRESENT_1,
                                &pvt->ambpresent[channel]);
                debugf2("\t\tAMB-present CH%d = 0x%x:\n",
                        channel, pvt->ambpresent[channel]);
        }

        /* Get the set of MTR[0-7] regs by each branch */
        for (slot = 0; slot < MAX_SLOTS; slot++) {
                int where = mtr_regs[slot];
                for (branch = 0; branch < MAX_BRANCHES; branch++) {
                        pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
                                        where,
                                        &pvt->mtr[slot][branch]);
                        for (ch = 0; ch < MAX_CH_PER_BRANCH; ch++) {
                                int channel = to_channel(ch, branch);

                                dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
                                               mci->n_layers, branch, ch, slot);

                                dinfo = &pvt->dimm_info[slot][channel];

                                mtr = decode_mtr(pvt, slot, ch, branch,
                                                 dinfo, dimm);

                                /* if no DIMMS on this row, continue */
                                if (!MTR_DIMMS_PRESENT(mtr))
                                        continue;

                                rc = 0;

                        }
                }
        }

        return rc;
}

/**
 * decode_mir() - Decodes Memory Interleave Register (MIR) info
 * @int mir_no: number of the MIR register to decode
 * @mir: array with the MIR data cached on the driver
 */
static void decode_mir(int mir_no, u16 mir[MAX_MIR])
{
        if (mir[mir_no] & 3)
                debugf2("MIR%d: limit= 0x%x Branch(es) that participate:"
                        " %s %s\n",
                        mir_no,
                        (mir[mir_no] >> 4) & 0xfff,
                        (mir[mir_no] & 1) ? "B0" : "",
                        (mir[mir_no] & 2) ? "B1" : "");
}

/**
 * i7300_get_mc_regs() - Get the contents of the MC enumeration registers
 * @mci: struct mem_ctl_info pointer
 *
 * Data read is cached internally for its usage when needed
 */
static int i7300_get_mc_regs(struct mem_ctl_info *mci)
{
        struct i7300_pvt *pvt;
        u32 actual_tolm;
        int i, rc;

        pvt = mci->pvt_info;

        pci_read_config_dword(pvt->pci_dev_16_0_fsb_ctlr, AMBASE,
                        (u32 *) &pvt->ambase);

        debugf2("AMBASE= 0x%lx\n", (long unsigned int)pvt->ambase);

        /* Get the Branch Map regs */
        pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, TOLM, &pvt->tolm);
        pvt->tolm >>= 12;
        debugf2("TOLM (number of 256M regions) =%u (0x%x)\n", pvt->tolm,
                pvt->tolm);

        actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28));
        debugf2("Actual TOLM byte addr=%u.%03u GB (0x%x)\n",
                actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28);

        /* Get memory controller settings */
        pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, MC_SETTINGS,
                             &pvt->mc_settings);
        pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, MC_SETTINGS_A,
                             &pvt->mc_settings_a);

        if (IS_SINGLE_MODE(pvt->mc_settings_a))
                debugf0("Memory controller operating on single mode\n");
        else
                debugf0("Memory controller operating on %s mode\n",
                IS_MIRRORED(pvt->mc_settings) ? "mirrored" : "non-mirrored");

        debugf0("Error detection is %s\n",
                IS_ECC_ENABLED(pvt->mc_settings) ? "enabled" : "disabled");
        debugf0("Retry is %s\n",
                IS_RETRY_ENABLED(pvt->mc_settings) ? "enabled" : "disabled");

        /* Get Memory Interleave Range registers */
        pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR0,
                             &pvt->mir[0]);
        pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR1,
                             &pvt->mir[1]);
        pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR2,
                             &pvt->mir[2]);

        /* Decode the MIR regs */
        for (i = 0; i < MAX_MIR; i++)
                decode_mir(i, pvt->mir);

        rc = i7300_init_csrows(mci);
        if (rc < 0)
                return rc;

        /* Go and determine the size of each DIMM and place in an
         * orderly matrix */
        print_dimm_size(pvt);

        return 0;
}

/*************************************************
 * i7300 Functions related to device probe/release
 *************************************************/

/**
 * i7300_put_devices() - Release the PCI devices
 * @mci: struct mem_ctl_info pointer
 */
static void i7300_put_devices(struct mem_ctl_info *mci)
{
        struct i7300_pvt *pvt;
        int branch;

        pvt = mci->pvt_info;

        /* Decrement usage count for devices */
        for (branch = 0; branch < MAX_CH_PER_BRANCH; branch++)
                pci_dev_put(pvt->pci_dev_2x_0_fbd_branch[branch]);
        pci_dev_put(pvt->pci_dev_16_2_fsb_err_regs);
        pci_dev_put(pvt->pci_dev_16_1_fsb_addr_map);
}

/**
 * i7300_get_devices() - Find and perform 'get' operation on the MCH's
 *                       device/functions we want to reference for this driver
 * @mci: struct mem_ctl_info pointer
 *
 * Access and prepare the several devices for usage:
 * I7300 devices used by this driver:
 *    Device 16, functions 0,1 and 2:   PCI_DEVICE_ID_INTEL_I7300_MCH_ERR
 *    Device 21 function 0:             PCI_DEVICE_ID_INTEL_I7300_MCH_FB0
 *    Device 22 function 0:             PCI_DEVICE_ID_INTEL_I7300_MCH_FB1
 */
static int __devinit i7300_get_devices(struct mem_ctl_info *mci)
{
        struct i7300_pvt *pvt;
        struct pci_dev *pdev;

        pvt = mci->pvt_info;

        /* Attempt to 'get' the MCH register we want */
        pdev = NULL;
        while (!pvt->pci_dev_16_1_fsb_addr_map ||
               !pvt->pci_dev_16_2_fsb_err_regs) {
                pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
                                      PCI_DEVICE_ID_INTEL_I7300_MCH_ERR, pdev);
                if (!pdev) {
                        /* End of list, leave */
                        i7300_printk(KERN_ERR,
                                "'system address,Process Bus' "
                                "device not found:"
                                "vendor 0x%x device 0x%x ERR funcs "
                                "(broken BIOS?)\n",
                                PCI_VENDOR_ID_INTEL,
                                PCI_DEVICE_ID_INTEL_I7300_MCH_ERR);
                        goto error;
                }

                /* Store device 16 funcs 1 and 2 */
                switch (PCI_FUNC(pdev->devfn)) {
                case 1:
                        pvt->pci_dev_16_1_fsb_addr_map = pdev;
                        break;
                case 2:
                        pvt->pci_dev_16_2_fsb_err_regs = pdev;
                        break;
                }
        }

        debugf1("System Address, processor bus- PCI Bus ID: %s  %x:%x\n",
                pci_name(pvt->pci_dev_16_0_fsb_ctlr),
                pvt->pci_dev_16_0_fsb_ctlr->vendor,
                pvt->pci_dev_16_0_fsb_ctlr->device);
        debugf1("Branchmap, control and errors - PCI Bus ID: %s  %x:%x\n",
                pci_name(pvt->pci_dev_16_1_fsb_addr_map),
                pvt->pci_dev_16_1_fsb_addr_map->vendor,
                pvt->pci_dev_16_1_fsb_addr_map->device);
        debugf1("FSB Error Regs - PCI Bus ID: %s  %x:%x\n",
                pci_name(pvt->pci_dev_16_2_fsb_err_regs),
                pvt->pci_dev_16_2_fsb_err_regs->vendor,
                pvt->pci_dev_16_2_fsb_err_regs->device);

        pvt->pci_dev_2x_0_fbd_branch[0] = pci_get_device(PCI_VENDOR_ID_INTEL,
                                            PCI_DEVICE_ID_INTEL_I7300_MCH_FB0,
                                            NULL);
        if (!pvt->pci_dev_2x_0_fbd_branch[0]) {
                i7300_printk(KERN_ERR,
                        "MC: 'BRANCH 0' device not found:"
                        "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
                        PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_FB0);
                goto error;
        }

        pvt->pci_dev_2x_0_fbd_branch[1] = pci_get_device(PCI_VENDOR_ID_INTEL,
                                            PCI_DEVICE_ID_INTEL_I7300_MCH_FB1,
                                            NULL);
        if (!pvt->pci_dev_2x_0_fbd_branch[1]) {
                i7300_printk(KERN_ERR,
                        "MC: 'BRANCH 1' device not found:"
                        "vendor 0x%x device 0x%x Func 0 "
                        "(broken BIOS?)\n",
                        PCI_VENDOR_ID_INTEL,
                        PCI_DEVICE_ID_INTEL_I7300_MCH_FB1);
                goto error;
        }

        return 0;

error:
        i7300_put_devices(mci);
        return -ENODEV;
}

/**
 * i7300_init_one() - Probe for one instance of the device
 * @pdev: struct pci_dev pointer
 * @id: struct pci_device_id pointer - currently unused
 */
static int __devinit i7300_init_one(struct pci_dev *pdev,
                                    const struct pci_device_id *id)
{
        struct mem_ctl_info *mci;
        struct edac_mc_layer layers[3];
        struct i7300_pvt *pvt;
        int rc;

        /* wake up device */
        rc = pci_enable_device(pdev);
        if (rc == -EIO)
                return rc;

        debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
                __func__,
                pdev->bus->number,
                PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));

        /* We only are looking for func 0 of the set */
        if (PCI_FUNC(pdev->devfn) != 0)
                return -ENODEV;

        /* allocate a new MC control structure */
        layers[0].type = EDAC_MC_LAYER_BRANCH;
        layers[0].size = MAX_BRANCHES;
        layers[0].is_virt_csrow = false;
        layers[1].type = EDAC_MC_LAYER_CHANNEL;
        layers[1].size = MAX_CH_PER_BRANCH;
        layers[1].is_virt_csrow = true;
        layers[2].type = EDAC_MC_LAYER_SLOT;
        layers[2].size = MAX_SLOTS;
        layers[2].is_virt_csrow = true;
        mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
        if (mci == NULL)
                return -ENOMEM;

        debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);

        mci->dev = &pdev->dev;  /* record ptr  to the generic device */

        pvt = mci->pvt_info;
        pvt->pci_dev_16_0_fsb_ctlr = pdev;      /* Record this device in our private */

        pvt->tmp_prt_buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
        if (!pvt->tmp_prt_buffer) {
                edac_mc_free(mci);
                return -ENOMEM;
        }

        /* 'get' the pci devices we want to reserve for our use */
        if (i7300_get_devices(mci))
                goto fail0;

        mci->mc_idx = 0;
        mci->mtype_cap = MEM_FLAG_FB_DDR2;
        mci->edac_ctl_cap = EDAC_FLAG_NONE;
        mci->edac_cap = EDAC_FLAG_NONE;
        mci->mod_name = "i7300_edac.c";
        mci->mod_ver = I7300_REVISION;
        mci->ctl_name = i7300_devs[0].ctl_name;
        mci->dev_name = pci_name(pdev);
        mci->ctl_page_to_phys = NULL;

        /* Set the function pointer to an actual operation function */
        mci->edac_check = i7300_check_error;

        /* initialize the MC control structure 'csrows' table
         * with the mapping and control information */
        if (i7300_get_mc_regs(mci)) {
                debugf0("MC: Setting mci->edac_cap to EDAC_FLAG_NONE\n"
                        "    because i7300_init_csrows() returned nonzero "
                        "value\n");
                mci->edac_cap = EDAC_FLAG_NONE; /* no csrows found */
        } else {
                debugf1("MC: Enable error reporting now\n");
                i7300_enable_error_reporting(mci);
        }

        /* add this new MC control structure to EDAC's list of MCs */
        if (edac_mc_add_mc(mci)) {
                debugf0("MC: " __FILE__
                        ": %s(): failed edac_mc_add_mc()\n", __func__);
                /* FIXME: perhaps some code should go here that disables error
                 * reporting if we just enabled it
                 */
                goto fail1;
        }

        i7300_clear_error(mci);

        /* allocating generic PCI control info */
        i7300_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
        if (!i7300_pci) {
                printk(KERN_WARNING
                        "%s(): Unable to create PCI control\n",
                        __func__);
                printk(KERN_WARNING
                        "%s(): PCI error report via EDAC not setup\n",
                        __func__);
        }

        return 0;

        /* Error exit unwinding stack */
fail1:

        i7300_put_devices(mci);

fail0:
        kfree(pvt->tmp_prt_buffer);
        edac_mc_free(mci);
        return -ENODEV;
}

/**
 * i7300_remove_one() - Remove the driver
 * @pdev: struct pci_dev pointer
 */
static void __devexit i7300_remove_one(struct pci_dev *pdev)
{
        struct mem_ctl_info *mci;
        char *tmp;

        debugf0(__FILE__ ": %s()\n", __func__);

        if (i7300_pci)
                edac_pci_release_generic_ctl(i7300_pci);

        mci = edac_mc_del_mc(&pdev->dev);
        if (!mci)
                return;

        tmp = ((struct i7300_pvt *)mci->pvt_info)->tmp_prt_buffer;

        /* retrieve references to resources, and free those resources */
        i7300_put_devices(mci);

        kfree(tmp);
        edac_mc_free(mci);
}

/*
 * pci_device_id: table for which devices we are looking for
 *
 * Has only 8086:360c PCI ID
 */
static DEFINE_PCI_DEVICE_TABLE(i7300_pci_tbl) = {
        {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_ERR)},
        {0,}                    /* 0 terminated list. */
};

MODULE_DEVICE_TABLE(pci, i7300_pci_tbl);

/*
 * i7300_driver: pci_driver structure for this module
 */
static struct pci_driver i7300_driver = {
        .name = "i7300_edac",
        .probe = i7300_init_one,
        .remove = __devexit_p(i7300_remove_one),
        .id_table = i7300_pci_tbl,
};

/**
 * i7300_init() - Registers the driver
 */
static int __init i7300_init(void)
{
        int pci_rc;

        debugf2("MC: " __FILE__ ": %s()\n", __func__);

        /* Ensure that the OPSTATE is set correctly for POLL or NMI */
        opstate_init();

        pci_rc = pci_register_driver(&i7300_driver);

        return (pci_rc < 0) ? pci_rc : 0;
}

/**
 * i7300_init() - Unregisters the driver
 */
static void __exit i7300_exit(void)
{
        debugf2("MC: " __FILE__ ": %s()\n", __func__);
        pci_unregister_driver(&i7300_driver);
}

module_init(i7300_init);
module_exit(i7300_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
MODULE_DESCRIPTION("MC Driver for Intel I7300 memory controllers - "
                   I7300_REVISION);

module_param(edac_op_state, int, 0444);
MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");