omap3: Add minimal OMAP3 IGEP module support
[linux-2.6.git] / arch / arm / mach-omap2 / gpmc-smsc911x.c
blob703f150dd01dbd7b86f54e279ddb116d48fe6316
1 /*
2 * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
4 * Copyright (C) 2009 Li-Pro.Net
5 * Stephan Linz <linz@li-pro.net>
7 * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/kernel.h>
15 #include <linux/platform_device.h>
16 #include <linux/gpio.h>
17 #include <linux/delay.h>
18 #include <linux/interrupt.h>
19 #include <linux/io.h>
20 #include <linux/smsc911x.h>
22 #include <plat/board.h>
23 #include <plat/gpmc.h>
24 #include <plat/gpmc-smsc911x.h>
26 static struct omap_smsc911x_platform_data *gpmc_cfg;
28 static struct resource gpmc_smsc911x_resources[] = {
29 [0] = {
30 .flags = IORESOURCE_MEM,
32 [1] = {
33 .flags = IORESOURCE_IRQ,
37 static struct smsc911x_platform_config gpmc_smsc911x_config = {
38 .phy_interface = PHY_INTERFACE_MODE_MII,
39 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
40 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
41 .flags = SMSC911X_USE_16BIT,
44 static struct platform_device gpmc_smsc911x_device = {
45 .name = "smsc911x",
46 .id = -1,
47 .num_resources = ARRAY_SIZE(gpmc_smsc911x_resources),
48 .resource = gpmc_smsc911x_resources,
49 .dev = {
50 .platform_data = &gpmc_smsc911x_config,
55 * Initialize smsc911x device connected to the GPMC. Note that we
56 * assume that pin multiplexing is done in the board-*.c file,
57 * or in the bootloader.
59 void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
61 unsigned long cs_mem_base;
62 int ret;
64 gpmc_cfg = board_data;
66 if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
67 printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
68 return;
71 gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
72 gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
74 if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) {
75 printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
76 gpmc_cfg->gpio_irq);
77 goto free1;
80 gpio_direction_input(gpmc_cfg->gpio_irq);
81 gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
82 gpmc_smsc911x_resources[1].flags |=
83 (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
85 if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
86 ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset");
87 if (ret) {
88 printk(KERN_ERR "Failed to request GPIO%d for smsc911x reset\n",
89 gpmc_cfg->gpio_reset);
90 goto free2;
93 gpio_direction_output(gpmc_cfg->gpio_reset, 1);
94 gpio_set_value(gpmc_cfg->gpio_reset, 0);
95 msleep(100);
96 gpio_set_value(gpmc_cfg->gpio_reset, 1);
99 if (platform_device_register(&gpmc_smsc911x_device) < 0) {
100 printk(KERN_ERR "Unable to register smsc911x device\n");
101 gpio_free(gpmc_cfg->gpio_reset);
102 goto free2;
105 return;
107 free2:
108 gpio_free(gpmc_cfg->gpio_irq);
109 free1:
110 gpmc_cs_free(gpmc_cfg->cs);
112 printk(KERN_ERR "Could not initialize smsc911x\n");