2 * Wireless utility functions
4 * Copyright 2007-2009 Johannes Berg <johannes@sipsolutions.net>
6 #include <linux/export.h>
7 #include <linux/bitops.h>
8 #include <linux/etherdevice.h>
9 #include <linux/slab.h>
10 #include <net/cfg80211.h>
12 #include <net/dsfield.h>
17 struct ieee80211_rate
*
18 ieee80211_get_response_rate(struct ieee80211_supported_band
*sband
,
19 u32 basic_rates
, int bitrate
)
21 struct ieee80211_rate
*result
= &sband
->bitrates
[0];
24 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
25 if (!(basic_rates
& BIT(i
)))
27 if (sband
->bitrates
[i
].bitrate
> bitrate
)
29 result
= &sband
->bitrates
[i
];
34 EXPORT_SYMBOL(ieee80211_get_response_rate
);
36 u32
ieee80211_mandatory_rates(struct ieee80211_supported_band
*sband
)
38 struct ieee80211_rate
*bitrates
;
39 u32 mandatory_rates
= 0;
40 enum ieee80211_rate_flags mandatory_flag
;
46 if (sband
->band
== IEEE80211_BAND_2GHZ
)
47 mandatory_flag
= IEEE80211_RATE_MANDATORY_B
;
49 mandatory_flag
= IEEE80211_RATE_MANDATORY_A
;
51 bitrates
= sband
->bitrates
;
52 for (i
= 0; i
< sband
->n_bitrates
; i
++)
53 if (bitrates
[i
].flags
& mandatory_flag
)
54 mandatory_rates
|= BIT(i
);
55 return mandatory_rates
;
57 EXPORT_SYMBOL(ieee80211_mandatory_rates
);
59 int ieee80211_channel_to_frequency(int chan
, enum ieee80211_band band
)
61 /* see 802.11 17.3.8.3.2 and Annex J
62 * there are overlapping channel numbers in 5GHz and 2GHz bands */
64 return 0; /* not supported */
66 case IEEE80211_BAND_2GHZ
:
70 return 2407 + chan
* 5;
72 case IEEE80211_BAND_5GHZ
:
73 if (chan
>= 182 && chan
<= 196)
74 return 4000 + chan
* 5;
76 return 5000 + chan
* 5;
78 case IEEE80211_BAND_60GHZ
:
80 return 56160 + chan
* 2160;
85 return 0; /* not supported */
87 EXPORT_SYMBOL(ieee80211_channel_to_frequency
);
89 int ieee80211_frequency_to_channel(int freq
)
91 /* see 802.11 17.3.8.3.2 and Annex J */
95 return (freq
- 2407) / 5;
96 else if (freq
>= 4910 && freq
<= 4980)
97 return (freq
- 4000) / 5;
98 else if (freq
<= 45000) /* DMG band lower limit */
99 return (freq
- 5000) / 5;
100 else if (freq
>= 58320 && freq
<= 64800)
101 return (freq
- 56160) / 2160;
105 EXPORT_SYMBOL(ieee80211_frequency_to_channel
);
107 struct ieee80211_channel
*__ieee80211_get_channel(struct wiphy
*wiphy
,
110 enum ieee80211_band band
;
111 struct ieee80211_supported_band
*sband
;
114 for (band
= 0; band
< IEEE80211_NUM_BANDS
; band
++) {
115 sband
= wiphy
->bands
[band
];
120 for (i
= 0; i
< sband
->n_channels
; i
++) {
121 if (sband
->channels
[i
].center_freq
== freq
)
122 return &sband
->channels
[i
];
128 EXPORT_SYMBOL(__ieee80211_get_channel
);
130 static void set_mandatory_flags_band(struct ieee80211_supported_band
*sband
,
131 enum ieee80211_band band
)
136 case IEEE80211_BAND_5GHZ
:
138 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
139 if (sband
->bitrates
[i
].bitrate
== 60 ||
140 sband
->bitrates
[i
].bitrate
== 120 ||
141 sband
->bitrates
[i
].bitrate
== 240) {
142 sband
->bitrates
[i
].flags
|=
143 IEEE80211_RATE_MANDATORY_A
;
149 case IEEE80211_BAND_2GHZ
:
151 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
152 if (sband
->bitrates
[i
].bitrate
== 10) {
153 sband
->bitrates
[i
].flags
|=
154 IEEE80211_RATE_MANDATORY_B
|
155 IEEE80211_RATE_MANDATORY_G
;
159 if (sband
->bitrates
[i
].bitrate
== 20 ||
160 sband
->bitrates
[i
].bitrate
== 55 ||
161 sband
->bitrates
[i
].bitrate
== 110 ||
162 sband
->bitrates
[i
].bitrate
== 60 ||
163 sband
->bitrates
[i
].bitrate
== 120 ||
164 sband
->bitrates
[i
].bitrate
== 240) {
165 sband
->bitrates
[i
].flags
|=
166 IEEE80211_RATE_MANDATORY_G
;
170 if (sband
->bitrates
[i
].bitrate
!= 10 &&
171 sband
->bitrates
[i
].bitrate
!= 20 &&
172 sband
->bitrates
[i
].bitrate
!= 55 &&
173 sband
->bitrates
[i
].bitrate
!= 110)
174 sband
->bitrates
[i
].flags
|=
175 IEEE80211_RATE_ERP_G
;
177 WARN_ON(want
!= 0 && want
!= 3 && want
!= 6);
179 case IEEE80211_BAND_60GHZ
:
180 /* check for mandatory HT MCS 1..4 */
181 WARN_ON(!sband
->ht_cap
.ht_supported
);
182 WARN_ON((sband
->ht_cap
.mcs
.rx_mask
[0] & 0x1e) != 0x1e);
184 case IEEE80211_NUM_BANDS
:
190 void ieee80211_set_bitrate_flags(struct wiphy
*wiphy
)
192 enum ieee80211_band band
;
194 for (band
= 0; band
< IEEE80211_NUM_BANDS
; band
++)
195 if (wiphy
->bands
[band
])
196 set_mandatory_flags_band(wiphy
->bands
[band
], band
);
199 bool cfg80211_supported_cipher_suite(struct wiphy
*wiphy
, u32 cipher
)
202 for (i
= 0; i
< wiphy
->n_cipher_suites
; i
++)
203 if (cipher
== wiphy
->cipher_suites
[i
])
208 int cfg80211_validate_key_settings(struct cfg80211_registered_device
*rdev
,
209 struct key_params
*params
, int key_idx
,
210 bool pairwise
, const u8
*mac_addr
)
215 if (!pairwise
&& mac_addr
&& !(rdev
->wiphy
.flags
& WIPHY_FLAG_IBSS_RSN
))
218 if (pairwise
&& !mac_addr
)
222 * Disallow pairwise keys with non-zero index unless it's WEP
223 * or a vendor specific cipher (because current deployments use
224 * pairwise WEP keys with non-zero indices and for vendor specific
225 * ciphers this should be validated in the driver or hardware level
226 * - but 802.11i clearly specifies to use zero)
228 if (pairwise
&& key_idx
&&
229 ((params
->cipher
== WLAN_CIPHER_SUITE_TKIP
) ||
230 (params
->cipher
== WLAN_CIPHER_SUITE_CCMP
) ||
231 (params
->cipher
== WLAN_CIPHER_SUITE_AES_CMAC
)))
234 switch (params
->cipher
) {
235 case WLAN_CIPHER_SUITE_WEP40
:
236 if (params
->key_len
!= WLAN_KEY_LEN_WEP40
)
239 case WLAN_CIPHER_SUITE_TKIP
:
240 if (params
->key_len
!= WLAN_KEY_LEN_TKIP
)
243 case WLAN_CIPHER_SUITE_CCMP
:
244 if (params
->key_len
!= WLAN_KEY_LEN_CCMP
)
247 case WLAN_CIPHER_SUITE_WEP104
:
248 if (params
->key_len
!= WLAN_KEY_LEN_WEP104
)
251 case WLAN_CIPHER_SUITE_AES_CMAC
:
252 if (params
->key_len
!= WLAN_KEY_LEN_AES_CMAC
)
257 * We don't know anything about this algorithm,
258 * allow using it -- but the driver must check
259 * all parameters! We still check below whether
260 * or not the driver supports this algorithm,
267 switch (params
->cipher
) {
268 case WLAN_CIPHER_SUITE_WEP40
:
269 case WLAN_CIPHER_SUITE_WEP104
:
270 /* These ciphers do not use key sequence */
272 case WLAN_CIPHER_SUITE_TKIP
:
273 case WLAN_CIPHER_SUITE_CCMP
:
274 case WLAN_CIPHER_SUITE_AES_CMAC
:
275 if (params
->seq_len
!= 6)
281 if (!cfg80211_supported_cipher_suite(&rdev
->wiphy
, params
->cipher
))
287 unsigned int __attribute_const__
ieee80211_hdrlen(__le16 fc
)
289 unsigned int hdrlen
= 24;
291 if (ieee80211_is_data(fc
)) {
292 if (ieee80211_has_a4(fc
))
294 if (ieee80211_is_data_qos(fc
)) {
295 hdrlen
+= IEEE80211_QOS_CTL_LEN
;
296 if (ieee80211_has_order(fc
))
297 hdrlen
+= IEEE80211_HT_CTL_LEN
;
302 if (ieee80211_is_ctl(fc
)) {
304 * ACK and CTS are 10 bytes, all others 16. To see how
305 * to get this condition consider
306 * subtype mask: 0b0000000011110000 (0x00F0)
307 * ACK subtype: 0b0000000011010000 (0x00D0)
308 * CTS subtype: 0b0000000011000000 (0x00C0)
309 * bits that matter: ^^^ (0x00E0)
310 * value of those: 0b0000000011000000 (0x00C0)
312 if ((fc
& cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0))
320 EXPORT_SYMBOL(ieee80211_hdrlen
);
322 unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff
*skb
)
324 const struct ieee80211_hdr
*hdr
=
325 (const struct ieee80211_hdr
*)skb
->data
;
328 if (unlikely(skb
->len
< 10))
330 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
331 if (unlikely(hdrlen
> skb
->len
))
335 EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb
);
337 unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr
*meshhdr
)
339 int ae
= meshhdr
->flags
& MESH_FLAGS_AE
;
340 /* 802.11-2012, 8.2.4.7.3 */
345 case MESH_FLAGS_AE_A4
:
347 case MESH_FLAGS_AE_A5_A6
:
351 EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen
);
353 int ieee80211_data_to_8023(struct sk_buff
*skb
, const u8
*addr
,
354 enum nl80211_iftype iftype
)
356 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
357 u16 hdrlen
, ethertype
;
360 u8 src
[ETH_ALEN
] __aligned(2);
362 if (unlikely(!ieee80211_is_data_present(hdr
->frame_control
)))
365 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
367 /* convert IEEE 802.11 header + possible LLC headers into Ethernet
369 * IEEE 802.11 address fields:
370 * ToDS FromDS Addr1 Addr2 Addr3 Addr4
371 * 0 0 DA SA BSSID n/a
372 * 0 1 DA BSSID SA n/a
373 * 1 0 BSSID SA DA n/a
376 memcpy(dst
, ieee80211_get_DA(hdr
), ETH_ALEN
);
377 memcpy(src
, ieee80211_get_SA(hdr
), ETH_ALEN
);
379 switch (hdr
->frame_control
&
380 cpu_to_le16(IEEE80211_FCTL_TODS
| IEEE80211_FCTL_FROMDS
)) {
381 case cpu_to_le16(IEEE80211_FCTL_TODS
):
382 if (unlikely(iftype
!= NL80211_IFTYPE_AP
&&
383 iftype
!= NL80211_IFTYPE_AP_VLAN
&&
384 iftype
!= NL80211_IFTYPE_P2P_GO
))
387 case cpu_to_le16(IEEE80211_FCTL_TODS
| IEEE80211_FCTL_FROMDS
):
388 if (unlikely(iftype
!= NL80211_IFTYPE_WDS
&&
389 iftype
!= NL80211_IFTYPE_MESH_POINT
&&
390 iftype
!= NL80211_IFTYPE_AP_VLAN
&&
391 iftype
!= NL80211_IFTYPE_STATION
))
393 if (iftype
== NL80211_IFTYPE_MESH_POINT
) {
394 struct ieee80211s_hdr
*meshdr
=
395 (struct ieee80211s_hdr
*) (skb
->data
+ hdrlen
);
396 /* make sure meshdr->flags is on the linear part */
397 if (!pskb_may_pull(skb
, hdrlen
+ 1))
399 if (meshdr
->flags
& MESH_FLAGS_AE_A4
)
401 if (meshdr
->flags
& MESH_FLAGS_AE_A5_A6
) {
402 skb_copy_bits(skb
, hdrlen
+
403 offsetof(struct ieee80211s_hdr
, eaddr1
),
405 skb_copy_bits(skb
, hdrlen
+
406 offsetof(struct ieee80211s_hdr
, eaddr2
),
409 hdrlen
+= ieee80211_get_mesh_hdrlen(meshdr
);
412 case cpu_to_le16(IEEE80211_FCTL_FROMDS
):
413 if ((iftype
!= NL80211_IFTYPE_STATION
&&
414 iftype
!= NL80211_IFTYPE_P2P_CLIENT
&&
415 iftype
!= NL80211_IFTYPE_MESH_POINT
) ||
416 (is_multicast_ether_addr(dst
) &&
417 ether_addr_equal(src
, addr
)))
419 if (iftype
== NL80211_IFTYPE_MESH_POINT
) {
420 struct ieee80211s_hdr
*meshdr
=
421 (struct ieee80211s_hdr
*) (skb
->data
+ hdrlen
);
422 /* make sure meshdr->flags is on the linear part */
423 if (!pskb_may_pull(skb
, hdrlen
+ 1))
425 if (meshdr
->flags
& MESH_FLAGS_AE_A5_A6
)
427 if (meshdr
->flags
& MESH_FLAGS_AE_A4
)
428 skb_copy_bits(skb
, hdrlen
+
429 offsetof(struct ieee80211s_hdr
, eaddr1
),
431 hdrlen
+= ieee80211_get_mesh_hdrlen(meshdr
);
435 if (iftype
!= NL80211_IFTYPE_ADHOC
&&
436 iftype
!= NL80211_IFTYPE_STATION
)
441 if (!pskb_may_pull(skb
, hdrlen
+ 8))
444 payload
= skb
->data
+ hdrlen
;
445 ethertype
= (payload
[6] << 8) | payload
[7];
447 if (likely((ether_addr_equal(payload
, rfc1042_header
) &&
448 ethertype
!= ETH_P_AARP
&& ethertype
!= ETH_P_IPX
) ||
449 ether_addr_equal(payload
, bridge_tunnel_header
))) {
450 /* remove RFC1042 or Bridge-Tunnel encapsulation and
451 * replace EtherType */
452 skb_pull(skb
, hdrlen
+ 6);
453 memcpy(skb_push(skb
, ETH_ALEN
), src
, ETH_ALEN
);
454 memcpy(skb_push(skb
, ETH_ALEN
), dst
, ETH_ALEN
);
459 skb_pull(skb
, hdrlen
);
460 len
= htons(skb
->len
);
461 ehdr
= (struct ethhdr
*) skb_push(skb
, sizeof(struct ethhdr
));
462 memcpy(ehdr
->h_dest
, dst
, ETH_ALEN
);
463 memcpy(ehdr
->h_source
, src
, ETH_ALEN
);
468 EXPORT_SYMBOL(ieee80211_data_to_8023
);
470 int ieee80211_data_from_8023(struct sk_buff
*skb
, const u8
*addr
,
471 enum nl80211_iftype iftype
, u8
*bssid
, bool qos
)
473 struct ieee80211_hdr hdr
;
474 u16 hdrlen
, ethertype
;
476 const u8
*encaps_data
;
477 int encaps_len
, skip_header_bytes
;
481 if (unlikely(skb
->len
< ETH_HLEN
))
484 nh_pos
= skb_network_header(skb
) - skb
->data
;
485 h_pos
= skb_transport_header(skb
) - skb
->data
;
487 /* convert Ethernet header to proper 802.11 header (based on
489 ethertype
= (skb
->data
[12] << 8) | skb
->data
[13];
490 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_DATA
);
493 case NL80211_IFTYPE_AP
:
494 case NL80211_IFTYPE_AP_VLAN
:
495 case NL80211_IFTYPE_P2P_GO
:
496 fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
);
498 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
499 memcpy(hdr
.addr2
, addr
, ETH_ALEN
);
500 memcpy(hdr
.addr3
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
503 case NL80211_IFTYPE_STATION
:
504 case NL80211_IFTYPE_P2P_CLIENT
:
505 fc
|= cpu_to_le16(IEEE80211_FCTL_TODS
);
507 memcpy(hdr
.addr1
, bssid
, ETH_ALEN
);
508 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
509 memcpy(hdr
.addr3
, skb
->data
, ETH_ALEN
);
512 case NL80211_IFTYPE_ADHOC
:
514 memcpy(hdr
.addr1
, skb
->data
, ETH_ALEN
);
515 memcpy(hdr
.addr2
, skb
->data
+ ETH_ALEN
, ETH_ALEN
);
516 memcpy(hdr
.addr3
, bssid
, ETH_ALEN
);
524 fc
|= cpu_to_le16(IEEE80211_STYPE_QOS_DATA
);
528 hdr
.frame_control
= fc
;
532 skip_header_bytes
= ETH_HLEN
;
533 if (ethertype
== ETH_P_AARP
|| ethertype
== ETH_P_IPX
) {
534 encaps_data
= bridge_tunnel_header
;
535 encaps_len
= sizeof(bridge_tunnel_header
);
536 skip_header_bytes
-= 2;
537 } else if (ethertype
>= ETH_P_802_3_MIN
) {
538 encaps_data
= rfc1042_header
;
539 encaps_len
= sizeof(rfc1042_header
);
540 skip_header_bytes
-= 2;
546 skb_pull(skb
, skip_header_bytes
);
547 nh_pos
-= skip_header_bytes
;
548 h_pos
-= skip_header_bytes
;
550 head_need
= hdrlen
+ encaps_len
- skb_headroom(skb
);
552 if (head_need
> 0 || skb_cloned(skb
)) {
553 head_need
= max(head_need
, 0);
557 if (pskb_expand_head(skb
, head_need
, 0, GFP_ATOMIC
))
560 skb
->truesize
+= head_need
;
564 memcpy(skb_push(skb
, encaps_len
), encaps_data
, encaps_len
);
565 nh_pos
+= encaps_len
;
569 memcpy(skb_push(skb
, hdrlen
), &hdr
, hdrlen
);
574 /* Update skb pointers to various headers since this modified frame
575 * is going to go through Linux networking code that may potentially
576 * need things like pointer to IP header. */
577 skb_set_mac_header(skb
, 0);
578 skb_set_network_header(skb
, nh_pos
);
579 skb_set_transport_header(skb
, h_pos
);
583 EXPORT_SYMBOL(ieee80211_data_from_8023
);
586 void ieee80211_amsdu_to_8023s(struct sk_buff
*skb
, struct sk_buff_head
*list
,
587 const u8
*addr
, enum nl80211_iftype iftype
,
588 const unsigned int extra_headroom
,
589 bool has_80211_header
)
591 struct sk_buff
*frame
= NULL
;
594 const struct ethhdr
*eth
;
596 u8 dst
[ETH_ALEN
], src
[ETH_ALEN
];
598 if (has_80211_header
) {
599 err
= ieee80211_data_to_8023(skb
, addr
, iftype
);
603 /* skip the wrapping header */
604 eth
= (struct ethhdr
*) skb_pull(skb
, sizeof(struct ethhdr
));
608 eth
= (struct ethhdr
*) skb
->data
;
611 while (skb
!= frame
) {
613 __be16 len
= eth
->h_proto
;
614 unsigned int subframe_len
= sizeof(struct ethhdr
) + ntohs(len
);
616 remaining
= skb
->len
;
617 memcpy(dst
, eth
->h_dest
, ETH_ALEN
);
618 memcpy(src
, eth
->h_source
, ETH_ALEN
);
620 padding
= (4 - subframe_len
) & 0x3;
621 /* the last MSDU has no padding */
622 if (subframe_len
> remaining
)
625 skb_pull(skb
, sizeof(struct ethhdr
));
626 /* reuse skb for the last subframe */
627 if (remaining
<= subframe_len
+ padding
)
630 unsigned int hlen
= ALIGN(extra_headroom
, 4);
632 * Allocate and reserve two bytes more for payload
633 * alignment since sizeof(struct ethhdr) is 14.
635 frame
= dev_alloc_skb(hlen
+ subframe_len
+ 2);
639 skb_reserve(frame
, hlen
+ sizeof(struct ethhdr
) + 2);
640 memcpy(skb_put(frame
, ntohs(len
)), skb
->data
,
643 eth
= (struct ethhdr
*)skb_pull(skb
, ntohs(len
) +
646 dev_kfree_skb(frame
);
651 skb_reset_network_header(frame
);
652 frame
->dev
= skb
->dev
;
653 frame
->priority
= skb
->priority
;
655 payload
= frame
->data
;
656 ethertype
= (payload
[6] << 8) | payload
[7];
658 if (likely((ether_addr_equal(payload
, rfc1042_header
) &&
659 ethertype
!= ETH_P_AARP
&& ethertype
!= ETH_P_IPX
) ||
660 ether_addr_equal(payload
, bridge_tunnel_header
))) {
661 /* remove RFC1042 or Bridge-Tunnel
662 * encapsulation and replace EtherType */
664 memcpy(skb_push(frame
, ETH_ALEN
), src
, ETH_ALEN
);
665 memcpy(skb_push(frame
, ETH_ALEN
), dst
, ETH_ALEN
);
667 memcpy(skb_push(frame
, sizeof(__be16
)), &len
,
669 memcpy(skb_push(frame
, ETH_ALEN
), src
, ETH_ALEN
);
670 memcpy(skb_push(frame
, ETH_ALEN
), dst
, ETH_ALEN
);
672 __skb_queue_tail(list
, frame
);
678 __skb_queue_purge(list
);
682 EXPORT_SYMBOL(ieee80211_amsdu_to_8023s
);
684 /* Given a data frame determine the 802.1p/1d tag to use. */
685 unsigned int cfg80211_classify8021d(struct sk_buff
*skb
)
689 /* skb->priority values from 256->263 are magic values to
690 * directly indicate a specific 802.1d priority. This is used
691 * to allow 802.1d priority to be passed directly in from VLAN
694 if (skb
->priority
>= 256 && skb
->priority
<= 263)
695 return skb
->priority
- 256;
697 switch (skb
->protocol
) {
698 case htons(ETH_P_IP
):
699 dscp
= ipv4_get_dsfield(ip_hdr(skb
)) & 0xfc;
701 case htons(ETH_P_IPV6
):
702 dscp
= ipv6_get_dsfield(ipv6_hdr(skb
)) & 0xfc;
710 EXPORT_SYMBOL(cfg80211_classify8021d
);
712 const u8
*ieee80211_bss_get_ie(struct cfg80211_bss
*bss
, u8 ie
)
714 const struct cfg80211_bss_ies
*ies
;
716 ies
= rcu_dereference(bss
->ies
);
720 return cfg80211_find_ie(ie
, ies
->data
, ies
->len
);
722 EXPORT_SYMBOL(ieee80211_bss_get_ie
);
724 void cfg80211_upload_connect_keys(struct wireless_dev
*wdev
)
726 struct cfg80211_registered_device
*rdev
= wiphy_to_dev(wdev
->wiphy
);
727 struct net_device
*dev
= wdev
->netdev
;
730 if (!wdev
->connect_keys
)
733 for (i
= 0; i
< 6; i
++) {
734 if (!wdev
->connect_keys
->params
[i
].cipher
)
736 if (rdev_add_key(rdev
, dev
, i
, false, NULL
,
737 &wdev
->connect_keys
->params
[i
])) {
738 netdev_err(dev
, "failed to set key %d\n", i
);
741 if (wdev
->connect_keys
->def
== i
)
742 if (rdev_set_default_key(rdev
, dev
, i
, true, true)) {
743 netdev_err(dev
, "failed to set defkey %d\n", i
);
746 if (wdev
->connect_keys
->defmgmt
== i
)
747 if (rdev_set_default_mgmt_key(rdev
, dev
, i
))
748 netdev_err(dev
, "failed to set mgtdef %d\n", i
);
751 kfree(wdev
->connect_keys
);
752 wdev
->connect_keys
= NULL
;
755 void cfg80211_process_wdev_events(struct wireless_dev
*wdev
)
757 struct cfg80211_event
*ev
;
759 const u8
*bssid
= NULL
;
761 spin_lock_irqsave(&wdev
->event_lock
, flags
);
762 while (!list_empty(&wdev
->event_list
)) {
763 ev
= list_first_entry(&wdev
->event_list
,
764 struct cfg80211_event
, list
);
766 spin_unlock_irqrestore(&wdev
->event_lock
, flags
);
770 case EVENT_CONNECT_RESULT
:
771 if (!is_zero_ether_addr(ev
->cr
.bssid
))
772 bssid
= ev
->cr
.bssid
;
773 __cfg80211_connect_result(
775 ev
->cr
.req_ie
, ev
->cr
.req_ie_len
,
776 ev
->cr
.resp_ie
, ev
->cr
.resp_ie_len
,
778 ev
->cr
.status
== WLAN_STATUS_SUCCESS
,
782 __cfg80211_roamed(wdev
, ev
->rm
.bss
, ev
->rm
.req_ie
,
783 ev
->rm
.req_ie_len
, ev
->rm
.resp_ie
,
786 case EVENT_DISCONNECTED
:
787 __cfg80211_disconnected(wdev
->netdev
,
788 ev
->dc
.ie
, ev
->dc
.ie_len
,
789 ev
->dc
.reason
, true);
791 case EVENT_IBSS_JOINED
:
792 __cfg80211_ibss_joined(wdev
->netdev
, ev
->ij
.bssid
);
799 spin_lock_irqsave(&wdev
->event_lock
, flags
);
801 spin_unlock_irqrestore(&wdev
->event_lock
, flags
);
804 void cfg80211_process_rdev_events(struct cfg80211_registered_device
*rdev
)
806 struct wireless_dev
*wdev
;
809 ASSERT_RDEV_LOCK(rdev
);
811 list_for_each_entry(wdev
, &rdev
->wdev_list
, list
)
812 cfg80211_process_wdev_events(wdev
);
815 int cfg80211_change_iface(struct cfg80211_registered_device
*rdev
,
816 struct net_device
*dev
, enum nl80211_iftype ntype
,
817 u32
*flags
, struct vif_params
*params
)
820 enum nl80211_iftype otype
= dev
->ieee80211_ptr
->iftype
;
822 ASSERT_RDEV_LOCK(rdev
);
824 /* don't support changing VLANs, you just re-create them */
825 if (otype
== NL80211_IFTYPE_AP_VLAN
)
828 /* cannot change into P2P device type */
829 if (ntype
== NL80211_IFTYPE_P2P_DEVICE
)
832 if (!rdev
->ops
->change_virtual_intf
||
833 !(rdev
->wiphy
.interface_modes
& (1 << ntype
)))
836 /* if it's part of a bridge, reject changing type to station/ibss */
837 if ((dev
->priv_flags
& IFF_BRIDGE_PORT
) &&
838 (ntype
== NL80211_IFTYPE_ADHOC
||
839 ntype
== NL80211_IFTYPE_STATION
||
840 ntype
== NL80211_IFTYPE_P2P_CLIENT
))
843 if (ntype
!= otype
&& netif_running(dev
)) {
844 err
= cfg80211_can_change_interface(rdev
, dev
->ieee80211_ptr
,
849 dev
->ieee80211_ptr
->use_4addr
= false;
850 dev
->ieee80211_ptr
->mesh_id_up_len
= 0;
853 case NL80211_IFTYPE_AP
:
854 cfg80211_stop_ap(rdev
, dev
);
856 case NL80211_IFTYPE_ADHOC
:
857 cfg80211_leave_ibss(rdev
, dev
, false);
859 case NL80211_IFTYPE_STATION
:
860 case NL80211_IFTYPE_P2P_CLIENT
:
861 wdev_lock(dev
->ieee80211_ptr
);
862 cfg80211_disconnect(rdev
, dev
,
863 WLAN_REASON_DEAUTH_LEAVING
, true);
864 wdev_unlock(dev
->ieee80211_ptr
);
866 case NL80211_IFTYPE_MESH_POINT
:
867 /* mesh should be handled? */
873 cfg80211_process_rdev_events(rdev
);
876 err
= rdev_change_virtual_intf(rdev
, dev
, ntype
, flags
, params
);
878 WARN_ON(!err
&& dev
->ieee80211_ptr
->iftype
!= ntype
);
880 if (!err
&& params
&& params
->use_4addr
!= -1)
881 dev
->ieee80211_ptr
->use_4addr
= params
->use_4addr
;
884 dev
->priv_flags
&= ~IFF_DONT_BRIDGE
;
886 case NL80211_IFTYPE_STATION
:
887 if (dev
->ieee80211_ptr
->use_4addr
)
890 case NL80211_IFTYPE_P2P_CLIENT
:
891 case NL80211_IFTYPE_ADHOC
:
892 dev
->priv_flags
|= IFF_DONT_BRIDGE
;
894 case NL80211_IFTYPE_P2P_GO
:
895 case NL80211_IFTYPE_AP
:
896 case NL80211_IFTYPE_AP_VLAN
:
897 case NL80211_IFTYPE_WDS
:
898 case NL80211_IFTYPE_MESH_POINT
:
901 case NL80211_IFTYPE_MONITOR
:
902 /* monitor can't bridge anyway */
904 case NL80211_IFTYPE_UNSPECIFIED
:
905 case NUM_NL80211_IFTYPES
:
908 case NL80211_IFTYPE_P2P_DEVICE
:
914 if (!err
&& ntype
!= otype
&& netif_running(dev
)) {
915 cfg80211_update_iface_num(rdev
, ntype
, 1);
916 cfg80211_update_iface_num(rdev
, otype
, -1);
922 static u32
cfg80211_calculate_bitrate_60g(struct rate_info
*rate
)
924 static const u32 __mcs2bitrate
[] = {
932 [5] = 12512, /* 1251.25 mbps */
942 [14] = 8662, /* 866.25 mbps */
952 [24] = 67568, /* 6756.75 mbps */
963 if (WARN_ON_ONCE(rate
->mcs
>= ARRAY_SIZE(__mcs2bitrate
)))
966 return __mcs2bitrate
[rate
->mcs
];
969 static u32
cfg80211_calculate_bitrate_vht(struct rate_info
*rate
)
971 static const u32 base
[4][10] = {
1020 if (WARN_ON_ONCE(rate
->mcs
> 9))
1023 idx
= rate
->flags
& (RATE_INFO_FLAGS_160_MHZ_WIDTH
|
1024 RATE_INFO_FLAGS_80P80_MHZ_WIDTH
) ? 3 :
1025 rate
->flags
& RATE_INFO_FLAGS_80_MHZ_WIDTH
? 2 :
1026 rate
->flags
& RATE_INFO_FLAGS_40_MHZ_WIDTH
? 1 : 0;
1028 bitrate
= base
[idx
][rate
->mcs
];
1029 bitrate
*= rate
->nss
;
1031 if (rate
->flags
& RATE_INFO_FLAGS_SHORT_GI
)
1032 bitrate
= (bitrate
/ 9) * 10;
1034 /* do NOT round down here */
1035 return (bitrate
+ 50000) / 100000;
1038 u32
cfg80211_calculate_bitrate(struct rate_info
*rate
)
1040 int modulation
, streams
, bitrate
;
1042 if (!(rate
->flags
& RATE_INFO_FLAGS_MCS
) &&
1043 !(rate
->flags
& RATE_INFO_FLAGS_VHT_MCS
))
1044 return rate
->legacy
;
1045 if (rate
->flags
& RATE_INFO_FLAGS_60G
)
1046 return cfg80211_calculate_bitrate_60g(rate
);
1047 if (rate
->flags
& RATE_INFO_FLAGS_VHT_MCS
)
1048 return cfg80211_calculate_bitrate_vht(rate
);
1050 /* the formula below does only work for MCS values smaller than 32 */
1051 if (WARN_ON_ONCE(rate
->mcs
>= 32))
1054 modulation
= rate
->mcs
& 7;
1055 streams
= (rate
->mcs
>> 3) + 1;
1057 bitrate
= (rate
->flags
& RATE_INFO_FLAGS_40_MHZ_WIDTH
) ?
1061 bitrate
*= (modulation
+ 1);
1062 else if (modulation
== 4)
1063 bitrate
*= (modulation
+ 2);
1065 bitrate
*= (modulation
+ 3);
1069 if (rate
->flags
& RATE_INFO_FLAGS_SHORT_GI
)
1070 bitrate
= (bitrate
/ 9) * 10;
1072 /* do NOT round down here */
1073 return (bitrate
+ 50000) / 100000;
1075 EXPORT_SYMBOL(cfg80211_calculate_bitrate
);
1077 int cfg80211_get_p2p_attr(const u8
*ies
, unsigned int len
,
1078 enum ieee80211_p2p_attr_id attr
,
1079 u8
*buf
, unsigned int bufsize
)
1082 u16 attr_remaining
= 0;
1083 bool desired_attr
= false;
1084 u16 desired_len
= 0;
1087 unsigned int iedatalen
;
1094 if (iedatalen
+ 2 > len
)
1097 if (ies
[0] != WLAN_EID_VENDOR_SPECIFIC
)
1105 /* check WFA OUI, P2P subtype */
1106 if (iedata
[0] != 0x50 || iedata
[1] != 0x6f ||
1107 iedata
[2] != 0x9a || iedata
[3] != 0x09)
1113 /* check attribute continuation into this IE */
1114 copy
= min_t(unsigned int, attr_remaining
, iedatalen
);
1115 if (copy
&& desired_attr
) {
1116 desired_len
+= copy
;
1118 memcpy(out
, iedata
, min(bufsize
, copy
));
1119 out
+= min(bufsize
, copy
);
1120 bufsize
-= min(bufsize
, copy
);
1124 if (copy
== attr_remaining
)
1128 attr_remaining
-= copy
;
1135 while (iedatalen
> 0) {
1138 /* P2P attribute ID & size must fit */
1141 desired_attr
= iedata
[0] == attr
;
1142 attr_len
= get_unaligned_le16(iedata
+ 1);
1146 copy
= min_t(unsigned int, attr_len
, iedatalen
);
1149 desired_len
+= copy
;
1151 memcpy(out
, iedata
, min(bufsize
, copy
));
1152 out
+= min(bufsize
, copy
);
1153 bufsize
-= min(bufsize
, copy
);
1156 if (copy
== attr_len
)
1162 attr_remaining
= attr_len
- copy
;
1170 if (attr_remaining
&& desired_attr
)
1175 EXPORT_SYMBOL(cfg80211_get_p2p_attr
);
1177 bool ieee80211_operating_class_to_band(u8 operating_class
,
1178 enum ieee80211_band
*band
)
1180 switch (operating_class
) {
1183 *band
= IEEE80211_BAND_5GHZ
;
1189 *band
= IEEE80211_BAND_2GHZ
;
1192 *band
= IEEE80211_BAND_60GHZ
;
1198 EXPORT_SYMBOL(ieee80211_operating_class_to_band
);
1200 int cfg80211_validate_beacon_int(struct cfg80211_registered_device
*rdev
,
1203 struct wireless_dev
*wdev
;
1209 list_for_each_entry(wdev
, &rdev
->wdev_list
, list
) {
1210 if (!wdev
->beacon_interval
)
1212 if (wdev
->beacon_interval
!= beacon_int
) {
1221 int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device
*rdev
,
1222 struct wireless_dev
*wdev
,
1223 enum nl80211_iftype iftype
,
1224 struct ieee80211_channel
*chan
,
1225 enum cfg80211_chan_mode chanmode
,
1228 struct wireless_dev
*wdev_iter
;
1229 u32 used_iftypes
= BIT(iftype
);
1230 int num
[NUM_NL80211_IFTYPES
];
1231 struct ieee80211_channel
1232 *used_channels
[CFG80211_MAX_NUM_DIFFERENT_CHANNELS
];
1233 struct ieee80211_channel
*ch
;
1234 enum cfg80211_chan_mode chmode
;
1235 int num_different_channels
= 0;
1237 bool radar_required
;
1242 if (WARN_ON(hweight32(radar_detect
) > 1))
1246 case NL80211_IFTYPE_ADHOC
:
1247 case NL80211_IFTYPE_AP
:
1248 case NL80211_IFTYPE_AP_VLAN
:
1249 case NL80211_IFTYPE_MESH_POINT
:
1250 case NL80211_IFTYPE_P2P_GO
:
1251 case NL80211_IFTYPE_WDS
:
1252 radar_required
= !!(chan
&&
1253 (chan
->flags
& IEEE80211_CHAN_RADAR
));
1255 case NL80211_IFTYPE_P2P_CLIENT
:
1256 case NL80211_IFTYPE_STATION
:
1257 case NL80211_IFTYPE_P2P_DEVICE
:
1258 case NL80211_IFTYPE_MONITOR
:
1259 radar_required
= false;
1261 case NUM_NL80211_IFTYPES
:
1262 case NL80211_IFTYPE_UNSPECIFIED
:
1267 if (radar_required
&& !radar_detect
)
1270 /* Always allow software iftypes */
1271 if (rdev
->wiphy
.software_iftypes
& BIT(iftype
)) {
1277 memset(num
, 0, sizeof(num
));
1278 memset(used_channels
, 0, sizeof(used_channels
));
1283 case CHAN_MODE_UNDEFINED
:
1285 case CHAN_MODE_SHARED
:
1287 used_channels
[0] = chan
;
1288 num_different_channels
++;
1290 case CHAN_MODE_EXCLUSIVE
:
1291 num_different_channels
++;
1295 list_for_each_entry(wdev_iter
, &rdev
->wdev_list
, list
) {
1296 if (wdev_iter
== wdev
)
1298 if (wdev_iter
->iftype
== NL80211_IFTYPE_P2P_DEVICE
) {
1299 if (!wdev_iter
->p2p_started
)
1301 } else if (wdev_iter
->netdev
) {
1302 if (!netif_running(wdev_iter
->netdev
))
1308 if (rdev
->wiphy
.software_iftypes
& BIT(wdev_iter
->iftype
))
1312 * We may be holding the "wdev" mutex, but now need to lock
1313 * wdev_iter. This is OK because once we get here wdev_iter
1314 * is not wdev (tested above), but we need to use the nested
1315 * locking for lockdep.
1317 mutex_lock_nested(&wdev_iter
->mtx
, 1);
1318 __acquire(wdev_iter
->mtx
);
1319 cfg80211_get_chan_state(wdev_iter
, &ch
, &chmode
);
1320 wdev_unlock(wdev_iter
);
1323 case CHAN_MODE_UNDEFINED
:
1325 case CHAN_MODE_SHARED
:
1326 for (i
= 0; i
< CFG80211_MAX_NUM_DIFFERENT_CHANNELS
; i
++)
1327 if (!used_channels
[i
] || used_channels
[i
] == ch
)
1330 if (i
== CFG80211_MAX_NUM_DIFFERENT_CHANNELS
)
1333 if (used_channels
[i
] == NULL
) {
1334 used_channels
[i
] = ch
;
1335 num_different_channels
++;
1338 case CHAN_MODE_EXCLUSIVE
:
1339 num_different_channels
++;
1343 num
[wdev_iter
->iftype
]++;
1345 used_iftypes
|= BIT(wdev_iter
->iftype
);
1348 if (total
== 1 && !radar_detect
)
1351 for (i
= 0; i
< rdev
->wiphy
.n_iface_combinations
; i
++) {
1352 const struct ieee80211_iface_combination
*c
;
1353 struct ieee80211_iface_limit
*limits
;
1354 u32 all_iftypes
= 0;
1356 c
= &rdev
->wiphy
.iface_combinations
[i
];
1358 if (total
> c
->max_interfaces
)
1360 if (num_different_channels
> c
->num_different_channels
)
1363 limits
= kmemdup(c
->limits
, sizeof(limits
[0]) * c
->n_limits
,
1368 for (iftype
= 0; iftype
< NUM_NL80211_IFTYPES
; iftype
++) {
1369 if (rdev
->wiphy
.software_iftypes
& BIT(iftype
))
1371 for (j
= 0; j
< c
->n_limits
; j
++) {
1372 all_iftypes
|= limits
[j
].types
;
1373 if (!(limits
[j
].types
& BIT(iftype
)))
1375 if (limits
[j
].max
< num
[iftype
])
1377 limits
[j
].max
-= num
[iftype
];
1381 if (radar_detect
&& !(c
->radar_detect_widths
& radar_detect
))
1385 * Finally check that all iftypes that we're currently
1386 * using are actually part of this combination. If they
1387 * aren't then we can't use this combination and have
1388 * to continue to the next.
1390 if ((all_iftypes
& used_iftypes
) != used_iftypes
)
1394 * This combination covered all interface types and
1395 * supported the requested numbers, so we're good.
1406 int ieee80211_get_ratemask(struct ieee80211_supported_band
*sband
,
1407 const u8
*rates
, unsigned int n_rates
,
1415 if (n_rates
== 0 || n_rates
> NL80211_MAX_SUPP_RATES
)
1420 for (i
= 0; i
< n_rates
; i
++) {
1421 int rate
= (rates
[i
] & 0x7f) * 5;
1424 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
1425 if (sband
->bitrates
[j
].bitrate
== rate
) {
1436 * mask must have at least one bit set here since we
1437 * didn't accept a 0-length rates array nor allowed
1438 * entries in the array that didn't exist
1444 /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
1445 /* Ethernet-II snap header (RFC1042 for most EtherTypes) */
1446 const unsigned char rfc1042_header
[] __aligned(2) =
1447 { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
1448 EXPORT_SYMBOL(rfc1042_header
);
1450 /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
1451 const unsigned char bridge_tunnel_header
[] __aligned(2) =
1452 { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
1453 EXPORT_SYMBOL(bridge_tunnel_header
);