2 * Blackfin core clock scaling
4 * Copyright 2008-2011 Analog Devices Inc.
6 * Licensed under the GPL-2 or later.
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/types.h>
12 #include <linux/init.h>
13 #include <linux/clk.h>
14 #include <linux/cpufreq.h>
16 #include <linux/delay.h>
17 #include <asm/blackfin.h>
22 /* this is the table of CCLK frequencies, in Hz */
23 /* .index is the entry in the auxiliary dpm_state_table[] */
24 static struct cpufreq_frequency_table bfin_freq_table
[] = {
26 .frequency
= CPUFREQ_TABLE_END
,
30 .frequency
= CPUFREQ_TABLE_END
,
34 .frequency
= CPUFREQ_TABLE_END
,
38 .frequency
= CPUFREQ_TABLE_END
,
43 static struct bfin_dpm_state
{
44 unsigned int csel
; /* system clock divider */
45 unsigned int tscale
; /* change the divider on the core timer interrupt */
48 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
50 * normalized to maximum frequency offset for CYCLES,
51 * used in time-ts cycles clock source, but could be used
54 unsigned long long __bfin_cycles_off
;
55 unsigned int __bfin_cycles_mod
;
58 /**************************************************************************/
59 static void __init
bfin_init_tables(unsigned long cclk
, unsigned long sclk
)
62 unsigned long csel
, min_cclk
;
65 /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
66 #if ANOMALY_05000273 || ANOMALY_05000274 || \
67 (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \
68 && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
75 csel
= ((bfin_read_PLL_DIV() & CSEL
) >> 4);
77 csel
= bfin_read32(CGU0_DIV
) & 0x1F;
80 for (index
= 0; (cclk
>> index
) >= min_cclk
&& csel
<= 3 && index
< 3; index
++, csel
++) {
81 bfin_freq_table
[index
].frequency
= cclk
>> index
;
83 dpm_state_table
[index
].csel
= csel
<< 4; /* Shift now into PLL_DIV bitpos */
85 dpm_state_table
[index
].csel
= csel
;
87 dpm_state_table
[index
].tscale
= (TIME_SCALE
>> index
) - 1;
89 pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
90 bfin_freq_table
[index
].frequency
,
91 dpm_state_table
[index
].csel
,
92 dpm_state_table
[index
].tscale
);
97 static void bfin_adjust_core_timer(void *info
)
100 unsigned int index
= *(unsigned int *)info
;
102 /* we have to adjust the core timer, because it is using cclk */
103 tscale
= dpm_state_table
[index
].tscale
;
104 bfin_write_TSCALE(tscale
);
108 static unsigned int bfin_getfreq_khz(unsigned int cpu
)
110 /* Both CoreA/B have the same core clock */
111 return get_cclk() / 1000;
115 unsigned long cpu_set_cclk(int cpu
, unsigned long new)
120 clk
= clk_get(NULL
, "CCLK");
124 ret
= clk_set_rate(clk
, new);
130 static int bfin_target(struct cpufreq_policy
*policy
,
131 unsigned int target_freq
, unsigned int relation
)
137 unsigned long cclk_hz
;
138 struct cpufreq_freqs freqs
;
139 static unsigned long lpj_ref
;
140 static unsigned int lpj_ref_freq
;
143 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
147 if (cpufreq_frequency_table_target(policy
, bfin_freq_table
, target_freq
,
151 cclk_hz
= bfin_freq_table
[index
].frequency
;
153 freqs
.old
= bfin_getfreq_khz(0);
156 pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
157 cclk_hz
, target_freq
, freqs
.old
);
159 cpufreq_notify_transition(policy
, &freqs
, CPUFREQ_PRECHANGE
);
161 plldiv
= (bfin_read_PLL_DIV() & SSEL
) | dpm_state_table
[index
].csel
;
162 bfin_write_PLL_DIV(plldiv
);
164 ret
= cpu_set_cclk(policy
->cpu
, freqs
.new * 1000);
166 WARN_ONCE(ret
, "cpufreq set freq failed %d\n", ret
);
170 on_each_cpu(bfin_adjust_core_timer
, &index
, 1);
171 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
172 cycles
= get_cycles();
174 cycles
+= 10; /* ~10 cycles we lose after get_cycles() */
175 __bfin_cycles_off
+= (cycles
<< __bfin_cycles_mod
) - (cycles
<< index
);
176 __bfin_cycles_mod
= index
;
179 lpj_ref
= loops_per_jiffy
;
180 lpj_ref_freq
= freqs
.old
;
182 if (freqs
.new != freqs
.old
) {
183 loops_per_jiffy
= cpufreq_scale(lpj_ref
,
184 lpj_ref_freq
, freqs
.new);
187 /* TODO: just test case for cycles clock source, remove later */
188 cpufreq_notify_transition(policy
, &freqs
, CPUFREQ_POSTCHANGE
);
190 pr_debug("cpufreq: done\n");
194 static int bfin_verify_speed(struct cpufreq_policy
*policy
)
196 return cpufreq_frequency_table_verify(policy
, bfin_freq_table
);
199 static int __bfin_cpu_init(struct cpufreq_policy
*policy
)
202 unsigned long cclk
, sclk
;
204 cclk
= get_cclk() / 1000;
205 sclk
= get_sclk() / 1000;
207 if (policy
->cpu
== CPUFREQ_CPU
)
208 bfin_init_tables(cclk
, sclk
);
210 policy
->cpuinfo
.transition_latency
= 50000; /* 50us assumed */
213 cpufreq_frequency_table_get_attr(bfin_freq_table
, policy
->cpu
);
214 return cpufreq_frequency_table_cpuinfo(policy
, bfin_freq_table
);
217 static struct freq_attr
*bfin_freq_attr
[] = {
218 &cpufreq_freq_attr_scaling_available_freqs
,
222 static struct cpufreq_driver bfin_driver
= {
223 .verify
= bfin_verify_speed
,
224 .target
= bfin_target
,
225 .get
= bfin_getfreq_khz
,
226 .init
= __bfin_cpu_init
,
227 .name
= "bfin cpufreq",
228 .owner
= THIS_MODULE
,
229 .attr
= bfin_freq_attr
,
232 static int __init
bfin_cpu_init(void)
234 return cpufreq_register_driver(&bfin_driver
);
237 static void __exit
bfin_cpu_exit(void)
239 cpufreq_unregister_driver(&bfin_driver
);
242 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
243 MODULE_DESCRIPTION("cpufreq driver for Blackfin");
244 MODULE_LICENSE("GPL");
246 module_init(bfin_cpu_init
);
247 module_exit(bfin_cpu_exit
);