percpu: use KERN_CONT in pcpu_dump_alloc_info()
[linux-2.6.git] / include / linux / interrupt.h
blob2aea5d22db07bc08a9bd0071ac49b7ab59ab592c
1 /* interrupt.h */
2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/irqnr.h>
12 #include <linux/hardirq.h>
13 #include <linux/irqflags.h>
14 #include <linux/smp.h>
15 #include <linux/percpu.h>
16 #include <linux/hrtimer.h>
17 #include <linux/kref.h>
18 #include <linux/workqueue.h>
20 #include <linux/atomic.h>
21 #include <asm/ptrace.h>
24 * These correspond to the IORESOURCE_IRQ_* defines in
25 * linux/ioport.h to select the interrupt line behaviour. When
26 * requesting an interrupt without specifying a IRQF_TRIGGER, the
27 * setting should be assumed to be "as already configured", which
28 * may be as per machine or firmware initialisation.
30 #define IRQF_TRIGGER_NONE 0x00000000
31 #define IRQF_TRIGGER_RISING 0x00000001
32 #define IRQF_TRIGGER_FALLING 0x00000002
33 #define IRQF_TRIGGER_HIGH 0x00000004
34 #define IRQF_TRIGGER_LOW 0x00000008
35 #define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
36 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
37 #define IRQF_TRIGGER_PROBE 0x00000010
40 * These flags used only by the kernel as part of the
41 * irq handling routines.
43 * IRQF_DISABLED - keep irqs disabled when calling the action handler.
44 * DEPRECATED. This flag is a NOOP and scheduled to be removed
45 * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
46 * IRQF_SHARED - allow sharing the irq among several devices
47 * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
48 * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
49 * IRQF_PERCPU - Interrupt is per cpu
50 * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
51 * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
52 * registered first in an shared interrupt is considered for
53 * performance reasons)
54 * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
55 * Used by threaded interrupts which need to keep the
56 * irq line disabled until the threaded handler has been run.
57 * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
58 * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
59 * IRQF_NO_THREAD - Interrupt cannot be threaded
60 * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
61 * resume time.
63 #define IRQF_DISABLED 0x00000020
64 #define IRQF_SAMPLE_RANDOM 0x00000040
65 #define IRQF_SHARED 0x00000080
66 #define IRQF_PROBE_SHARED 0x00000100
67 #define __IRQF_TIMER 0x00000200
68 #define IRQF_PERCPU 0x00000400
69 #define IRQF_NOBALANCING 0x00000800
70 #define IRQF_IRQPOLL 0x00001000
71 #define IRQF_ONESHOT 0x00002000
72 #define IRQF_NO_SUSPEND 0x00004000
73 #define IRQF_FORCE_RESUME 0x00008000
74 #define IRQF_NO_THREAD 0x00010000
75 #define IRQF_EARLY_RESUME 0x00020000
77 #define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
80 * These values can be returned by request_any_context_irq() and
81 * describe the context the interrupt will be run in.
83 * IRQC_IS_HARDIRQ - interrupt runs in hardirq context
84 * IRQC_IS_NESTED - interrupt runs in a nested threaded context
86 enum {
87 IRQC_IS_HARDIRQ = 0,
88 IRQC_IS_NESTED,
91 typedef irqreturn_t (*irq_handler_t)(int, void *);
93 /**
94 * struct irqaction - per interrupt action descriptor
95 * @handler: interrupt handler function
96 * @flags: flags (see IRQF_* above)
97 * @name: name of the device
98 * @dev_id: cookie to identify the device
99 * @percpu_dev_id: cookie to identify the device
100 * @next: pointer to the next irqaction for shared interrupts
101 * @irq: interrupt number
102 * @dir: pointer to the proc/irq/NN/name entry
103 * @thread_fn: interrupt handler function for threaded interrupts
104 * @thread: thread pointer for threaded interrupts
105 * @thread_flags: flags related to @thread
106 * @thread_mask: bitmask for keeping track of @thread activity
108 struct irqaction {
109 irq_handler_t handler;
110 unsigned long flags;
111 void *dev_id;
112 void __percpu *percpu_dev_id;
113 struct irqaction *next;
114 int irq;
115 irq_handler_t thread_fn;
116 struct task_struct *thread;
117 unsigned long thread_flags;
118 unsigned long thread_mask;
119 const char *name;
120 struct proc_dir_entry *dir;
121 } ____cacheline_internodealigned_in_smp;
123 extern irqreturn_t no_action(int cpl, void *dev_id);
125 #ifdef CONFIG_GENERIC_HARDIRQS
126 extern int __must_check
127 request_threaded_irq(unsigned int irq, irq_handler_t handler,
128 irq_handler_t thread_fn,
129 unsigned long flags, const char *name, void *dev);
131 static inline int __must_check
132 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
133 const char *name, void *dev)
135 return request_threaded_irq(irq, handler, NULL, flags, name, dev);
138 extern int __must_check
139 request_any_context_irq(unsigned int irq, irq_handler_t handler,
140 unsigned long flags, const char *name, void *dev_id);
142 extern int __must_check
143 request_percpu_irq(unsigned int irq, irq_handler_t handler,
144 const char *devname, void __percpu *percpu_dev_id);
146 extern void exit_irq_thread(void);
147 #else
149 extern int __must_check
150 request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
151 const char *name, void *dev);
154 * Special function to avoid ifdeffery in kernel/irq/devres.c which
155 * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
156 * m68k). I really love these $@%#!* obvious Makefile references:
157 * ../../../kernel/irq/devres.o
159 static inline int __must_check
160 request_threaded_irq(unsigned int irq, irq_handler_t handler,
161 irq_handler_t thread_fn,
162 unsigned long flags, const char *name, void *dev)
164 return request_irq(irq, handler, flags, name, dev);
167 static inline int __must_check
168 request_any_context_irq(unsigned int irq, irq_handler_t handler,
169 unsigned long flags, const char *name, void *dev_id)
171 return request_irq(irq, handler, flags, name, dev_id);
174 static inline int __must_check
175 request_percpu_irq(unsigned int irq, irq_handler_t handler,
176 const char *devname, void __percpu *percpu_dev_id)
178 return request_irq(irq, handler, 0, devname, percpu_dev_id);
181 static inline void exit_irq_thread(void) { }
182 #endif
184 extern void free_irq(unsigned int, void *);
185 extern void free_percpu_irq(unsigned int, void __percpu *);
187 struct device;
189 extern int __must_check
190 devm_request_threaded_irq(struct device *dev, unsigned int irq,
191 irq_handler_t handler, irq_handler_t thread_fn,
192 unsigned long irqflags, const char *devname,
193 void *dev_id);
195 static inline int __must_check
196 devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
197 unsigned long irqflags, const char *devname, void *dev_id)
199 return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags,
200 devname, dev_id);
203 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
206 * On lockdep we dont want to enable hardirqs in hardirq
207 * context. Use local_irq_enable_in_hardirq() to annotate
208 * kernel code that has to do this nevertheless (pretty much
209 * the only valid case is for old/broken hardware that is
210 * insanely slow).
212 * NOTE: in theory this might break fragile code that relies
213 * on hardirq delivery - in practice we dont seem to have such
214 * places left. So the only effect should be slightly increased
215 * irqs-off latencies.
217 #ifdef CONFIG_LOCKDEP
218 # define local_irq_enable_in_hardirq() do { } while (0)
219 #else
220 # define local_irq_enable_in_hardirq() local_irq_enable()
221 #endif
223 extern void disable_irq_nosync(unsigned int irq);
224 extern void disable_irq(unsigned int irq);
225 extern void disable_percpu_irq(unsigned int irq);
226 extern void enable_irq(unsigned int irq);
227 extern void enable_percpu_irq(unsigned int irq, unsigned int type);
229 /* The following three functions are for the core kernel use only. */
230 #ifdef CONFIG_GENERIC_HARDIRQS
231 extern void suspend_device_irqs(void);
232 extern void resume_device_irqs(void);
233 #ifdef CONFIG_PM_SLEEP
234 extern int check_wakeup_irqs(void);
235 #else
236 static inline int check_wakeup_irqs(void) { return 0; }
237 #endif
238 #else
239 static inline void suspend_device_irqs(void) { };
240 static inline void resume_device_irqs(void) { };
241 static inline int check_wakeup_irqs(void) { return 0; }
242 #endif
244 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
246 extern cpumask_var_t irq_default_affinity;
248 extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
249 extern int irq_can_set_affinity(unsigned int irq);
250 extern int irq_select_affinity(unsigned int irq);
252 extern int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m);
255 * struct irq_affinity_notify - context for notification of IRQ affinity changes
256 * @irq: Interrupt to which notification applies
257 * @kref: Reference count, for internal use
258 * @work: Work item, for internal use
259 * @notify: Function to be called on change. This will be
260 * called in process context.
261 * @release: Function to be called on release. This will be
262 * called in process context. Once registered, the
263 * structure must only be freed when this function is
264 * called or later.
266 struct irq_affinity_notify {
267 unsigned int irq;
268 struct kref kref;
269 struct work_struct work;
270 void (*notify)(struct irq_affinity_notify *, const cpumask_t *mask);
271 void (*release)(struct kref *ref);
274 extern int
275 irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify);
277 static inline void irq_run_affinity_notifiers(void)
279 flush_scheduled_work();
282 #else /* CONFIG_SMP */
284 static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
286 return -EINVAL;
289 static inline int irq_can_set_affinity(unsigned int irq)
291 return 0;
294 static inline int irq_select_affinity(unsigned int irq) { return 0; }
296 static inline int irq_set_affinity_hint(unsigned int irq,
297 const struct cpumask *m)
299 return -EINVAL;
301 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
303 #ifdef CONFIG_GENERIC_HARDIRQS
305 * Special lockdep variants of irq disabling/enabling.
306 * These should be used for locking constructs that
307 * know that a particular irq context which is disabled,
308 * and which is the only irq-context user of a lock,
309 * that it's safe to take the lock in the irq-disabled
310 * section without disabling hardirqs.
312 * On !CONFIG_LOCKDEP they are equivalent to the normal
313 * irq disable/enable methods.
315 static inline void disable_irq_nosync_lockdep(unsigned int irq)
317 disable_irq_nosync(irq);
318 #ifdef CONFIG_LOCKDEP
319 local_irq_disable();
320 #endif
323 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
325 disable_irq_nosync(irq);
326 #ifdef CONFIG_LOCKDEP
327 local_irq_save(*flags);
328 #endif
331 static inline void disable_irq_lockdep(unsigned int irq)
333 disable_irq(irq);
334 #ifdef CONFIG_LOCKDEP
335 local_irq_disable();
336 #endif
339 static inline void enable_irq_lockdep(unsigned int irq)
341 #ifdef CONFIG_LOCKDEP
342 local_irq_enable();
343 #endif
344 enable_irq(irq);
347 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
349 #ifdef CONFIG_LOCKDEP
350 local_irq_restore(*flags);
351 #endif
352 enable_irq(irq);
355 /* IRQ wakeup (PM) control: */
356 extern int irq_set_irq_wake(unsigned int irq, unsigned int on);
358 static inline int enable_irq_wake(unsigned int irq)
360 return irq_set_irq_wake(irq, 1);
363 static inline int disable_irq_wake(unsigned int irq)
365 return irq_set_irq_wake(irq, 0);
368 #else /* !CONFIG_GENERIC_HARDIRQS */
370 * NOTE: non-genirq architectures, if they want to support the lock
371 * validator need to define the methods below in their asm/irq.h
372 * files, under an #ifdef CONFIG_LOCKDEP section.
374 #ifndef CONFIG_LOCKDEP
375 # define disable_irq_nosync_lockdep(irq) disable_irq_nosync(irq)
376 # define disable_irq_nosync_lockdep_irqsave(irq, flags) \
377 disable_irq_nosync(irq)
378 # define disable_irq_lockdep(irq) disable_irq(irq)
379 # define enable_irq_lockdep(irq) enable_irq(irq)
380 # define enable_irq_lockdep_irqrestore(irq, flags) \
381 enable_irq(irq)
382 # endif
384 static inline int enable_irq_wake(unsigned int irq)
386 return 0;
389 static inline int disable_irq_wake(unsigned int irq)
391 return 0;
393 #endif /* CONFIG_GENERIC_HARDIRQS */
396 #ifdef CONFIG_IRQ_FORCED_THREADING
397 extern bool force_irqthreads;
398 #else
399 #define force_irqthreads (0)
400 #endif
402 #ifndef __ARCH_SET_SOFTIRQ_PENDING
403 #define set_softirq_pending(x) (local_softirq_pending() = (x))
404 #define or_softirq_pending(x) (local_softirq_pending() |= (x))
405 #endif
407 /* Some architectures might implement lazy enabling/disabling of
408 * interrupts. In some cases, such as stop_machine, we might want
409 * to ensure that after a local_irq_disable(), interrupts have
410 * really been disabled in hardware. Such architectures need to
411 * implement the following hook.
413 #ifndef hard_irq_disable
414 #define hard_irq_disable() do { } while(0)
415 #endif
417 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
418 frequency threaded job scheduling. For almost all the purposes
419 tasklets are more than enough. F.e. all serial device BHs et
420 al. should be converted to tasklets, not to softirqs.
423 enum
425 HI_SOFTIRQ=0,
426 TIMER_SOFTIRQ,
427 NET_TX_SOFTIRQ,
428 NET_RX_SOFTIRQ,
429 BLOCK_SOFTIRQ,
430 BLOCK_IOPOLL_SOFTIRQ,
431 TASKLET_SOFTIRQ,
432 SCHED_SOFTIRQ,
433 HRTIMER_SOFTIRQ,
434 RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */
436 NR_SOFTIRQS
439 /* map softirq index to softirq name. update 'softirq_to_name' in
440 * kernel/softirq.c when adding a new softirq.
442 extern char *softirq_to_name[NR_SOFTIRQS];
444 /* softirq mask and active fields moved to irq_cpustat_t in
445 * asm/hardirq.h to get better cache usage. KAO
448 struct softirq_action
450 void (*action)(struct softirq_action *);
453 asmlinkage void do_softirq(void);
454 asmlinkage void __do_softirq(void);
455 extern void open_softirq(int nr, void (*action)(struct softirq_action *));
456 extern void softirq_init(void);
457 extern void __raise_softirq_irqoff(unsigned int nr);
459 extern void raise_softirq_irqoff(unsigned int nr);
460 extern void raise_softirq(unsigned int nr);
462 /* This is the worklist that queues up per-cpu softirq work.
464 * send_remote_sendirq() adds work to these lists, and
465 * the softirq handler itself dequeues from them. The queues
466 * are protected by disabling local cpu interrupts and they must
467 * only be accessed by the local cpu that they are for.
469 DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
471 DECLARE_PER_CPU(struct task_struct *, ksoftirqd);
473 static inline struct task_struct *this_cpu_ksoftirqd(void)
475 return this_cpu_read(ksoftirqd);
478 /* Try to send a softirq to a remote cpu. If this cannot be done, the
479 * work will be queued to the local cpu.
481 extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq);
483 /* Like send_remote_softirq(), but the caller must disable local cpu interrupts
484 * and compute the current cpu, passed in as 'this_cpu'.
486 extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
487 int this_cpu, int softirq);
489 /* Tasklets --- multithreaded analogue of BHs.
491 Main feature differing them of generic softirqs: tasklet
492 is running only on one CPU simultaneously.
494 Main feature differing them of BHs: different tasklets
495 may be run simultaneously on different CPUs.
497 Properties:
498 * If tasklet_schedule() is called, then tasklet is guaranteed
499 to be executed on some cpu at least once after this.
500 * If the tasklet is already scheduled, but its execution is still not
501 started, it will be executed only once.
502 * If this tasklet is already running on another CPU (or schedule is called
503 from tasklet itself), it is rescheduled for later.
504 * Tasklet is strictly serialized wrt itself, but not
505 wrt another tasklets. If client needs some intertask synchronization,
506 he makes it with spinlocks.
509 struct tasklet_struct
511 struct tasklet_struct *next;
512 unsigned long state;
513 atomic_t count;
514 void (*func)(unsigned long);
515 unsigned long data;
518 #define DECLARE_TASKLET(name, func, data) \
519 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
521 #define DECLARE_TASKLET_DISABLED(name, func, data) \
522 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
525 enum
527 TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */
528 TASKLET_STATE_RUN /* Tasklet is running (SMP only) */
531 #ifdef CONFIG_SMP
532 static inline int tasklet_trylock(struct tasklet_struct *t)
534 return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
537 static inline void tasklet_unlock(struct tasklet_struct *t)
539 smp_mb__before_clear_bit();
540 clear_bit(TASKLET_STATE_RUN, &(t)->state);
543 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
545 while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
547 #else
548 #define tasklet_trylock(t) 1
549 #define tasklet_unlock_wait(t) do { } while (0)
550 #define tasklet_unlock(t) do { } while (0)
551 #endif
553 extern void __tasklet_schedule(struct tasklet_struct *t);
555 static inline void tasklet_schedule(struct tasklet_struct *t)
557 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
558 __tasklet_schedule(t);
561 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
563 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
565 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
566 __tasklet_hi_schedule(t);
569 extern void __tasklet_hi_schedule_first(struct tasklet_struct *t);
572 * This version avoids touching any other tasklets. Needed for kmemcheck
573 * in order not to take any page faults while enqueueing this tasklet;
574 * consider VERY carefully whether you really need this or
575 * tasklet_hi_schedule()...
577 static inline void tasklet_hi_schedule_first(struct tasklet_struct *t)
579 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
580 __tasklet_hi_schedule_first(t);
584 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
586 atomic_inc(&t->count);
587 smp_mb__after_atomic_inc();
590 static inline void tasklet_disable(struct tasklet_struct *t)
592 tasklet_disable_nosync(t);
593 tasklet_unlock_wait(t);
594 smp_mb();
597 static inline void tasklet_enable(struct tasklet_struct *t)
599 smp_mb__before_atomic_dec();
600 atomic_dec(&t->count);
603 static inline void tasklet_hi_enable(struct tasklet_struct *t)
605 smp_mb__before_atomic_dec();
606 atomic_dec(&t->count);
609 extern void tasklet_kill(struct tasklet_struct *t);
610 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
611 extern void tasklet_init(struct tasklet_struct *t,
612 void (*func)(unsigned long), unsigned long data);
614 struct tasklet_hrtimer {
615 struct hrtimer timer;
616 struct tasklet_struct tasklet;
617 enum hrtimer_restart (*function)(struct hrtimer *);
620 extern void
621 tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
622 enum hrtimer_restart (*function)(struct hrtimer *),
623 clockid_t which_clock, enum hrtimer_mode mode);
625 static inline
626 int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
627 const enum hrtimer_mode mode)
629 return hrtimer_start(&ttimer->timer, time, mode);
632 static inline
633 void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
635 hrtimer_cancel(&ttimer->timer);
636 tasklet_kill(&ttimer->tasklet);
640 * Autoprobing for irqs:
642 * probe_irq_on() and probe_irq_off() provide robust primitives
643 * for accurate IRQ probing during kernel initialization. They are
644 * reasonably simple to use, are not "fooled" by spurious interrupts,
645 * and, unlike other attempts at IRQ probing, they do not get hung on
646 * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
648 * For reasonably foolproof probing, use them as follows:
650 * 1. clear and/or mask the device's internal interrupt.
651 * 2. sti();
652 * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs
653 * 4. enable the device and cause it to trigger an interrupt.
654 * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
655 * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple
656 * 7. service the device to clear its pending interrupt.
657 * 8. loop again if paranoia is required.
659 * probe_irq_on() returns a mask of allocated irq's.
661 * probe_irq_off() takes the mask as a parameter,
662 * and returns the irq number which occurred,
663 * or zero if none occurred, or a negative irq number
664 * if more than one irq occurred.
667 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE)
668 static inline unsigned long probe_irq_on(void)
670 return 0;
672 static inline int probe_irq_off(unsigned long val)
674 return 0;
676 static inline unsigned int probe_irq_mask(unsigned long val)
678 return 0;
680 #else
681 extern unsigned long probe_irq_on(void); /* returns 0 on failure */
682 extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */
683 extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */
684 #endif
686 #ifdef CONFIG_PROC_FS
687 /* Initialize /proc/irq/ */
688 extern void init_irq_proc(void);
689 #else
690 static inline void init_irq_proc(void)
693 #endif
695 struct seq_file;
696 int show_interrupts(struct seq_file *p, void *v);
697 int arch_show_interrupts(struct seq_file *p, int prec);
699 extern int early_irq_init(void);
700 extern int arch_probe_nr_irqs(void);
701 extern int arch_early_irq_init(void);
703 #endif