percpu: use KERN_CONT in pcpu_dump_alloc_info()
[linux-2.6.git] / include / drm / drm_dp_helper.h
blob93df2d72750b1878e8822bf8716b77926941ae91
1 /*
2 * Copyright © 2008 Keith Packard
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 * OF THIS SOFTWARE.
23 #ifndef _DRM_DP_HELPER_H_
24 #define _DRM_DP_HELPER_H_
26 #include <linux/types.h>
27 #include <linux/i2c.h>
29 /* From the VESA DisplayPort spec */
31 #define AUX_NATIVE_WRITE 0x8
32 #define AUX_NATIVE_READ 0x9
33 #define AUX_I2C_WRITE 0x0
34 #define AUX_I2C_READ 0x1
35 #define AUX_I2C_STATUS 0x2
36 #define AUX_I2C_MOT 0x4
38 #define AUX_NATIVE_REPLY_ACK (0x0 << 4)
39 #define AUX_NATIVE_REPLY_NACK (0x1 << 4)
40 #define AUX_NATIVE_REPLY_DEFER (0x2 << 4)
41 #define AUX_NATIVE_REPLY_MASK (0x3 << 4)
43 #define AUX_I2C_REPLY_ACK (0x0 << 6)
44 #define AUX_I2C_REPLY_NACK (0x1 << 6)
45 #define AUX_I2C_REPLY_DEFER (0x2 << 6)
46 #define AUX_I2C_REPLY_MASK (0x3 << 6)
48 /* AUX CH addresses */
49 /* DPCD */
50 #define DP_DPCD_REV 0x000
52 #define DP_MAX_LINK_RATE 0x001
54 #define DP_MAX_LANE_COUNT 0x002
55 # define DP_MAX_LANE_COUNT_MASK 0x1f
56 # define DP_TPS3_SUPPORTED (1 << 6)
57 # define DP_ENHANCED_FRAME_CAP (1 << 7)
59 #define DP_MAX_DOWNSPREAD 0x003
60 # define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6)
62 #define DP_NORP 0x004
64 #define DP_DOWNSTREAMPORT_PRESENT 0x005
65 # define DP_DWN_STRM_PORT_PRESENT (1 << 0)
66 # define DP_DWN_STRM_PORT_TYPE_MASK 0x06
67 /* 00b = DisplayPort */
68 /* 01b = Analog */
69 /* 10b = TMDS or HDMI */
70 /* 11b = Other */
71 # define DP_FORMAT_CONVERSION (1 << 3)
73 #define DP_MAIN_LINK_CHANNEL_CODING 0x006
75 #define DP_EDP_CONFIGURATION_CAP 0x00d
76 #define DP_TRAINING_AUX_RD_INTERVAL 0x00e
78 #define DP_PSR_SUPPORT 0x070
79 # define DP_PSR_IS_SUPPORTED 1
80 #define DP_PSR_CAPS 0x071
81 # define DP_PSR_NO_TRAIN_ON_EXIT 1
82 # define DP_PSR_SETUP_TIME_330 (0 << 1)
83 # define DP_PSR_SETUP_TIME_275 (1 << 1)
84 # define DP_PSR_SETUP_TIME_220 (2 << 1)
85 # define DP_PSR_SETUP_TIME_165 (3 << 1)
86 # define DP_PSR_SETUP_TIME_110 (4 << 1)
87 # define DP_PSR_SETUP_TIME_55 (5 << 1)
88 # define DP_PSR_SETUP_TIME_0 (6 << 1)
89 # define DP_PSR_SETUP_TIME_MASK (7 << 1)
90 # define DP_PSR_SETUP_TIME_SHIFT 1
92 /* link configuration */
93 #define DP_LINK_BW_SET 0x100
94 # define DP_LINK_BW_1_62 0x06
95 # define DP_LINK_BW_2_7 0x0a
96 # define DP_LINK_BW_5_4 0x14
98 #define DP_LANE_COUNT_SET 0x101
99 # define DP_LANE_COUNT_MASK 0x0f
100 # define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7)
102 #define DP_TRAINING_PATTERN_SET 0x102
103 # define DP_TRAINING_PATTERN_DISABLE 0
104 # define DP_TRAINING_PATTERN_1 1
105 # define DP_TRAINING_PATTERN_2 2
106 # define DP_TRAINING_PATTERN_3 3
107 # define DP_TRAINING_PATTERN_MASK 0x3
109 # define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2)
110 # define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2)
111 # define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2)
112 # define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2)
113 # define DP_LINK_QUAL_PATTERN_MASK (3 << 2)
115 # define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
116 # define DP_LINK_SCRAMBLING_DISABLE (1 << 5)
118 # define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6)
119 # define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6)
120 # define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6)
121 # define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6)
123 #define DP_TRAINING_LANE0_SET 0x103
124 #define DP_TRAINING_LANE1_SET 0x104
125 #define DP_TRAINING_LANE2_SET 0x105
126 #define DP_TRAINING_LANE3_SET 0x106
128 # define DP_TRAIN_VOLTAGE_SWING_MASK 0x3
129 # define DP_TRAIN_VOLTAGE_SWING_SHIFT 0
130 # define DP_TRAIN_MAX_SWING_REACHED (1 << 2)
131 # define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0)
132 # define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0)
133 # define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0)
134 # define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0)
136 # define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3)
137 # define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3)
138 # define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3)
139 # define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3)
140 # define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3)
142 # define DP_TRAIN_PRE_EMPHASIS_SHIFT 3
143 # define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5)
145 #define DP_DOWNSPREAD_CTRL 0x107
146 # define DP_SPREAD_AMP_0_5 (1 << 4)
148 #define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
149 # define DP_SET_ANSI_8B10B (1 << 0)
151 #define DP_PSR_EN_CFG 0x170
152 # define DP_PSR_ENABLE (1 << 0)
153 # define DP_PSR_MAIN_LINK_ACTIVE (1 << 1)
154 # define DP_PSR_CRC_VERIFICATION (1 << 2)
155 # define DP_PSR_FRAME_CAPTURE (1 << 3)
157 #define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201
158 # define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0)
159 # define DP_AUTOMATED_TEST_REQUEST (1 << 1)
160 # define DP_CP_IRQ (1 << 2)
161 # define DP_SINK_SPECIFIC_IRQ (1 << 6)
163 #define DP_EDP_CONFIGURATION_SET 0x10a
165 #define DP_LANE0_1_STATUS 0x202
166 #define DP_LANE2_3_STATUS 0x203
167 # define DP_LANE_CR_DONE (1 << 0)
168 # define DP_LANE_CHANNEL_EQ_DONE (1 << 1)
169 # define DP_LANE_SYMBOL_LOCKED (1 << 2)
171 #define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \
172 DP_LANE_CHANNEL_EQ_DONE | \
173 DP_LANE_SYMBOL_LOCKED)
175 #define DP_LANE_ALIGN_STATUS_UPDATED 0x204
177 #define DP_INTERLANE_ALIGN_DONE (1 << 0)
178 #define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6)
179 #define DP_LINK_STATUS_UPDATED (1 << 7)
181 #define DP_SINK_STATUS 0x205
183 #define DP_RECEIVE_PORT_0_STATUS (1 << 0)
184 #define DP_RECEIVE_PORT_1_STATUS (1 << 1)
186 #define DP_ADJUST_REQUEST_LANE0_1 0x206
187 #define DP_ADJUST_REQUEST_LANE2_3 0x207
188 # define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03
189 # define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
190 # define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c
191 # define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2
192 # define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30
193 # define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
194 # define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
195 # define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6
197 #define DP_TEST_REQUEST 0x218
198 # define DP_TEST_LINK_TRAINING (1 << 0)
199 # define DP_TEST_LINK_PATTERN (1 << 1)
200 # define DP_TEST_LINK_EDID_READ (1 << 2)
201 # define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */
203 #define DP_TEST_LINK_RATE 0x219
204 # define DP_LINK_RATE_162 (0x6)
205 # define DP_LINK_RATE_27 (0xa)
207 #define DP_TEST_LANE_COUNT 0x220
209 #define DP_TEST_PATTERN 0x221
211 #define DP_TEST_RESPONSE 0x260
212 # define DP_TEST_ACK (1 << 0)
213 # define DP_TEST_NAK (1 << 1)
214 # define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2)
216 #define DP_SET_POWER 0x600
217 # define DP_SET_POWER_D0 0x1
218 # define DP_SET_POWER_D3 0x2
220 #define DP_PSR_ERROR_STATUS 0x2006
221 # define DP_PSR_LINK_CRC_ERROR (1 << 0)
222 # define DP_PSR_RFB_STORAGE_ERROR (1 << 1)
224 #define DP_PSR_ESI 0x2007
225 # define DP_PSR_CAPS_CHANGE (1 << 0)
227 #define DP_PSR_STATUS 0x2008
228 # define DP_PSR_SINK_INACTIVE 0
229 # define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1
230 # define DP_PSR_SINK_ACTIVE_RFB 2
231 # define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3
232 # define DP_PSR_SINK_ACTIVE_RESYNC 4
233 # define DP_PSR_SINK_INTERNAL_ERROR 7
234 # define DP_PSR_SINK_STATE_MASK 0x07
236 #define MODE_I2C_START 1
237 #define MODE_I2C_WRITE 2
238 #define MODE_I2C_READ 4
239 #define MODE_I2C_STOP 8
241 struct i2c_algo_dp_aux_data {
242 bool running;
243 u16 address;
244 int (*aux_ch) (struct i2c_adapter *adapter,
245 int mode, uint8_t write_byte,
246 uint8_t *read_byte);
250 i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
252 #endif /* _DRM_DP_HELPER_H_ */