2 * Device Tree Souce for Buffalo KuroboxHD
4 * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
5 * the default configuration linkstation_defconfig.
7 * Based on sandpoint.dts
9 * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
11 * This file is licensed under
12 * the terms of the GNU General Public License version 2. This program
13 * is licensed "as is" without any warranty of any kind, whether express
16 XXXX add flash parts, rtc, ??
22 compatible = "linkstation";
30 PowerPC,603e { /* Really 8241 */
33 clock-frequency = <bebc200>; /* Fixed by bootloader */
34 timebase-frequency = <1743000>; /* Fixed by bootloader */
35 bus-frequency = <0>; /* Fixed by bootloader */
36 /* Following required by dtc but not used */
37 i-cache-size = <4000>;
38 d-cache-size = <4000>;
43 device_type = "memory";
44 reg = <00000000 04000000>;
47 soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
50 #interrupt-cells = <2>;
52 compatible = "mpc10x";
53 store-gathering = <0>; /* 0 == off, !0 == on */
54 reg = <80000000 00100000>;
55 ranges = <80000000 80000000 70000000 /* pci mem space */
56 fc000000 fc000000 00100000 /* EUMB */
57 fe000000 fe000000 00c00000 /* pci i/o space */
58 fec00000 fec00000 00300000 /* pci cfg regs */
59 fef00000 fef00000 00100000>; /* pci iack */
65 compatible = "fsl-i2c";
66 reg = <80003000 1000>;
68 interrupt-parent = <&mpic>;
72 compatible = "ricoh,rs5c372b";
78 device_type = "serial";
79 compatible = "ns16550";
81 clock-frequency = <5d08d88>;
82 current-speed = <2580>;
84 interrupt-parent = <&mpic>;
88 device_type = "serial";
89 compatible = "ns16550";
91 clock-frequency = <5d08d88>;
92 current-speed = <e100>;
94 interrupt-parent = <&mpic>;
97 mpic: interrupt-controller@80040000 {
98 #interrupt-cells = <2>;
100 device_type = "open-pic";
101 compatible = "chrp,open-pic";
102 interrupt-controller;
103 reg = <80040000 40000>;
108 #address-cells = <3>;
110 #interrupt-cells = <1>;
112 compatible = "mpc10x-pci";
113 reg = <fec00000 400000>;
114 ranges = <01000000 0 0 fe000000 0 00c00000
115 02000000 0 80000000 80000000 0 70000000>;
117 clock-frequency = <7f28155>;
118 interrupt-parent = <&mpic>;
119 interrupt-map-mask = <f800 0 0 7>;
121 /* IDSEL 11 - IRQ0 ETH */
126 /* IDSEL 12 - IRQ1 IDE0 */
131 /* IDSEL 14 - IRQ3 USB2.0 */