2 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
4 * Copyright 2005 Tejun Heo
6 * Based on preview driver from Silicon Image.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2, or (at your option) any
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/gfp.h>
23 #include <linux/pci.h>
24 #include <linux/blkdev.h>
25 #include <linux/delay.h>
26 #include <linux/interrupt.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/device.h>
29 #include <scsi/scsi_host.h>
30 #include <scsi/scsi_cmnd.h>
31 #include <linux/libata.h>
33 #define DRV_NAME "sata_sil24"
34 #define DRV_VERSION "1.1"
37 * Port request block (PRB) 32 bytes
47 * Scatter gather entry (SGE) 16 bytes
60 /* sil24 fetches in chunks of 64bytes. The first block
61 * contains the PRB and two SGEs. From the second block, it's
62 * consisted of four SGEs and called SGT. Calculate the
63 * number of SGTs that fit into one page.
65 SIL24_PRB_SZ
= sizeof(struct sil24_prb
)
66 + 2 * sizeof(struct sil24_sge
),
67 SIL24_MAX_SGT
= (PAGE_SIZE
- SIL24_PRB_SZ
)
68 / (4 * sizeof(struct sil24_sge
)),
70 /* This will give us one unused SGEs for ATA. This extra SGE
71 * will be used to store CDB for ATAPI devices.
73 SIL24_MAX_SGE
= 4 * SIL24_MAX_SGT
+ 1,
76 * Global controller registers (128 bytes @ BAR0)
79 HOST_SLOT_STAT
= 0x00, /* 32 bit slot stat * 4 */
83 HOST_BIST_CTRL
= 0x50,
84 HOST_BIST_PTRN
= 0x54,
85 HOST_BIST_STAT
= 0x58,
86 HOST_MEM_BIST_STAT
= 0x5c,
87 HOST_FLASH_CMD
= 0x70,
89 HOST_FLASH_DATA
= 0x74,
90 HOST_TRANSITION_DETECT
= 0x75,
91 HOST_GPIO_CTRL
= 0x76,
92 HOST_I2C_ADDR
= 0x78, /* 32 bit */
94 HOST_I2C_XFER_CNT
= 0x7e,
97 /* HOST_SLOT_STAT bits */
98 HOST_SSTAT_ATTN
= (1 << 31),
101 HOST_CTRL_M66EN
= (1 << 16), /* M66EN PCI bus signal */
102 HOST_CTRL_TRDY
= (1 << 17), /* latched PCI TRDY */
103 HOST_CTRL_STOP
= (1 << 18), /* latched PCI STOP */
104 HOST_CTRL_DEVSEL
= (1 << 19), /* latched PCI DEVSEL */
105 HOST_CTRL_REQ64
= (1 << 20), /* latched PCI REQ64 */
106 HOST_CTRL_GLOBAL_RST
= (1 << 31), /* global reset */
110 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
112 PORT_REGS_SIZE
= 0x2000,
114 PORT_LRAM
= 0x0000, /* 31 LRAM slots and PMP regs */
115 PORT_LRAM_SLOT_SZ
= 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
117 PORT_PMP
= 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
118 PORT_PMP_STATUS
= 0x0000, /* port device status offset */
119 PORT_PMP_QACTIVE
= 0x0004, /* port device QActive offset */
120 PORT_PMP_SIZE
= 0x0008, /* 8 bytes per PMP */
123 PORT_CTRL_STAT
= 0x1000, /* write: ctrl-set, read: stat */
124 PORT_CTRL_CLR
= 0x1004, /* write: ctrl-clear */
125 PORT_IRQ_STAT
= 0x1008, /* high: status, low: interrupt */
126 PORT_IRQ_ENABLE_SET
= 0x1010, /* write: enable-set */
127 PORT_IRQ_ENABLE_CLR
= 0x1014, /* write: enable-clear */
128 PORT_ACTIVATE_UPPER_ADDR
= 0x101c,
129 PORT_EXEC_FIFO
= 0x1020, /* command execution fifo */
130 PORT_CMD_ERR
= 0x1024, /* command error number */
131 PORT_FIS_CFG
= 0x1028,
132 PORT_FIFO_THRES
= 0x102c,
134 PORT_DECODE_ERR_CNT
= 0x1040,
135 PORT_DECODE_ERR_THRESH
= 0x1042,
136 PORT_CRC_ERR_CNT
= 0x1044,
137 PORT_CRC_ERR_THRESH
= 0x1046,
138 PORT_HSHK_ERR_CNT
= 0x1048,
139 PORT_HSHK_ERR_THRESH
= 0x104a,
141 PORT_PHY_CFG
= 0x1050,
142 PORT_SLOT_STAT
= 0x1800,
143 PORT_CMD_ACTIVATE
= 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
144 PORT_CONTEXT
= 0x1e04,
145 PORT_EXEC_DIAG
= 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
146 PORT_PSD_DIAG
= 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
147 PORT_SCONTROL
= 0x1f00,
148 PORT_SSTATUS
= 0x1f04,
149 PORT_SERROR
= 0x1f08,
150 PORT_SACTIVE
= 0x1f0c,
152 /* PORT_CTRL_STAT bits */
153 PORT_CS_PORT_RST
= (1 << 0), /* port reset */
154 PORT_CS_DEV_RST
= (1 << 1), /* device reset */
155 PORT_CS_INIT
= (1 << 2), /* port initialize */
156 PORT_CS_IRQ_WOC
= (1 << 3), /* interrupt write one to clear */
157 PORT_CS_CDB16
= (1 << 5), /* 0=12b cdb, 1=16b cdb */
158 PORT_CS_PMP_RESUME
= (1 << 6), /* PMP resume */
159 PORT_CS_32BIT_ACTV
= (1 << 10), /* 32-bit activation */
160 PORT_CS_PMP_EN
= (1 << 13), /* port multiplier enable */
161 PORT_CS_RDY
= (1 << 31), /* port ready to accept commands */
163 /* PORT_IRQ_STAT/ENABLE_SET/CLR */
164 /* bits[11:0] are masked */
165 PORT_IRQ_COMPLETE
= (1 << 0), /* command(s) completed */
166 PORT_IRQ_ERROR
= (1 << 1), /* command execution error */
167 PORT_IRQ_PORTRDY_CHG
= (1 << 2), /* port ready change */
168 PORT_IRQ_PWR_CHG
= (1 << 3), /* power management change */
169 PORT_IRQ_PHYRDY_CHG
= (1 << 4), /* PHY ready change */
170 PORT_IRQ_COMWAKE
= (1 << 5), /* COMWAKE received */
171 PORT_IRQ_UNK_FIS
= (1 << 6), /* unknown FIS received */
172 PORT_IRQ_DEV_XCHG
= (1 << 7), /* device exchanged */
173 PORT_IRQ_8B10B
= (1 << 8), /* 8b/10b decode error threshold */
174 PORT_IRQ_CRC
= (1 << 9), /* CRC error threshold */
175 PORT_IRQ_HANDSHAKE
= (1 << 10), /* handshake error threshold */
176 PORT_IRQ_SDB_NOTIFY
= (1 << 11), /* SDB notify received */
178 DEF_PORT_IRQ
= PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
|
179 PORT_IRQ_PHYRDY_CHG
| PORT_IRQ_DEV_XCHG
|
180 PORT_IRQ_UNK_FIS
| PORT_IRQ_SDB_NOTIFY
,
182 /* bits[27:16] are unmasked (raw) */
183 PORT_IRQ_RAW_SHIFT
= 16,
184 PORT_IRQ_MASKED_MASK
= 0x7ff,
185 PORT_IRQ_RAW_MASK
= (0x7ff << PORT_IRQ_RAW_SHIFT
),
187 /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
188 PORT_IRQ_STEER_SHIFT
= 30,
189 PORT_IRQ_STEER_MASK
= (3 << PORT_IRQ_STEER_SHIFT
),
191 /* PORT_CMD_ERR constants */
192 PORT_CERR_DEV
= 1, /* Error bit in D2H Register FIS */
193 PORT_CERR_SDB
= 2, /* Error bit in SDB FIS */
194 PORT_CERR_DATA
= 3, /* Error in data FIS not detected by dev */
195 PORT_CERR_SEND
= 4, /* Initial cmd FIS transmission failure */
196 PORT_CERR_INCONSISTENT
= 5, /* Protocol mismatch */
197 PORT_CERR_DIRECTION
= 6, /* Data direction mismatch */
198 PORT_CERR_UNDERRUN
= 7, /* Ran out of SGEs while writing */
199 PORT_CERR_OVERRUN
= 8, /* Ran out of SGEs while reading */
200 PORT_CERR_PKT_PROT
= 11, /* DIR invalid in 1st PIO setup of ATAPI */
201 PORT_CERR_SGT_BOUNDARY
= 16, /* PLD ecode 00 - SGT not on qword boundary */
202 PORT_CERR_SGT_TGTABRT
= 17, /* PLD ecode 01 - target abort */
203 PORT_CERR_SGT_MSTABRT
= 18, /* PLD ecode 10 - master abort */
204 PORT_CERR_SGT_PCIPERR
= 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
205 PORT_CERR_CMD_BOUNDARY
= 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
206 PORT_CERR_CMD_TGTABRT
= 25, /* ctrl[15:13] 010 - target abort */
207 PORT_CERR_CMD_MSTABRT
= 26, /* ctrl[15:13] 100 - master abort */
208 PORT_CERR_CMD_PCIPERR
= 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
209 PORT_CERR_XFR_UNDEF
= 32, /* PSD ecode 00 - undefined */
210 PORT_CERR_XFR_TGTABRT
= 33, /* PSD ecode 01 - target abort */
211 PORT_CERR_XFR_MSTABRT
= 34, /* PSD ecode 10 - master abort */
212 PORT_CERR_XFR_PCIPERR
= 35, /* PSD ecode 11 - PCI prity err during transfer */
213 PORT_CERR_SENDSERVICE
= 36, /* FIS received while sending service */
215 /* bits of PRB control field */
216 PRB_CTRL_PROTOCOL
= (1 << 0), /* override def. ATA protocol */
217 PRB_CTRL_PACKET_READ
= (1 << 4), /* PACKET cmd read */
218 PRB_CTRL_PACKET_WRITE
= (1 << 5), /* PACKET cmd write */
219 PRB_CTRL_NIEN
= (1 << 6), /* Mask completion irq */
220 PRB_CTRL_SRST
= (1 << 7), /* Soft reset request (ign BSY?) */
222 /* PRB protocol field */
223 PRB_PROT_PACKET
= (1 << 0),
224 PRB_PROT_TCQ
= (1 << 1),
225 PRB_PROT_NCQ
= (1 << 2),
226 PRB_PROT_READ
= (1 << 3),
227 PRB_PROT_WRITE
= (1 << 4),
228 PRB_PROT_TRANSPARENT
= (1 << 5),
233 SGE_TRM
= (1 << 31), /* Last SGE in chain */
234 SGE_LNK
= (1 << 30), /* linked list
235 Points to SGT, not SGE */
236 SGE_DRD
= (1 << 29), /* discard data read (/dev/null)
237 data address ignored */
247 SIL24_COMMON_FLAGS
= ATA_FLAG_SATA
| ATA_FLAG_PIO_DMA
|
248 ATA_FLAG_NCQ
| ATA_FLAG_ACPI_SATA
|
249 ATA_FLAG_AN
| ATA_FLAG_PMP
,
250 SIL24_FLAG_PCIX_IRQ_WOC
= (1 << 24), /* IRQ loss errata on PCI-X */
252 IRQ_STAT_4PORTS
= 0xf,
255 struct sil24_ata_block
{
256 struct sil24_prb prb
;
257 struct sil24_sge sge
[SIL24_MAX_SGE
];
260 struct sil24_atapi_block
{
261 struct sil24_prb prb
;
263 struct sil24_sge sge
[SIL24_MAX_SGE
];
266 union sil24_cmd_block
{
267 struct sil24_ata_block ata
;
268 struct sil24_atapi_block atapi
;
271 static const struct sil24_cerr_info
{
272 unsigned int err_mask
, action
;
274 } sil24_cerr_db
[] = {
275 [0] = { AC_ERR_DEV
, 0,
277 [PORT_CERR_DEV
] = { AC_ERR_DEV
, 0,
278 "device error via D2H FIS" },
279 [PORT_CERR_SDB
] = { AC_ERR_DEV
, 0,
280 "device error via SDB FIS" },
281 [PORT_CERR_DATA
] = { AC_ERR_ATA_BUS
, ATA_EH_RESET
,
282 "error in data FIS" },
283 [PORT_CERR_SEND
] = { AC_ERR_ATA_BUS
, ATA_EH_RESET
,
284 "failed to transmit command FIS" },
285 [PORT_CERR_INCONSISTENT
] = { AC_ERR_HSM
, ATA_EH_RESET
,
286 "protocol mismatch" },
287 [PORT_CERR_DIRECTION
] = { AC_ERR_HSM
, ATA_EH_RESET
,
288 "data directon mismatch" },
289 [PORT_CERR_UNDERRUN
] = { AC_ERR_HSM
, ATA_EH_RESET
,
290 "ran out of SGEs while writing" },
291 [PORT_CERR_OVERRUN
] = { AC_ERR_HSM
, ATA_EH_RESET
,
292 "ran out of SGEs while reading" },
293 [PORT_CERR_PKT_PROT
] = { AC_ERR_HSM
, ATA_EH_RESET
,
294 "invalid data directon for ATAPI CDB" },
295 [PORT_CERR_SGT_BOUNDARY
] = { AC_ERR_SYSTEM
, ATA_EH_RESET
,
296 "SGT not on qword boundary" },
297 [PORT_CERR_SGT_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
298 "PCI target abort while fetching SGT" },
299 [PORT_CERR_SGT_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
300 "PCI master abort while fetching SGT" },
301 [PORT_CERR_SGT_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
302 "PCI parity error while fetching SGT" },
303 [PORT_CERR_CMD_BOUNDARY
] = { AC_ERR_SYSTEM
, ATA_EH_RESET
,
304 "PRB not on qword boundary" },
305 [PORT_CERR_CMD_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
306 "PCI target abort while fetching PRB" },
307 [PORT_CERR_CMD_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
308 "PCI master abort while fetching PRB" },
309 [PORT_CERR_CMD_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
310 "PCI parity error while fetching PRB" },
311 [PORT_CERR_XFR_UNDEF
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
312 "undefined error while transferring data" },
313 [PORT_CERR_XFR_TGTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
314 "PCI target abort while transferring data" },
315 [PORT_CERR_XFR_MSTABRT
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
316 "PCI master abort while transferring data" },
317 [PORT_CERR_XFR_PCIPERR
] = { AC_ERR_HOST_BUS
, ATA_EH_RESET
,
318 "PCI parity error while transferring data" },
319 [PORT_CERR_SENDSERVICE
] = { AC_ERR_HSM
, ATA_EH_RESET
,
320 "FIS received while sending service FIS" },
326 * The preview driver always returned 0 for status. We emulate it
327 * here from the previous interrupt.
329 struct sil24_port_priv
{
330 union sil24_cmd_block
*cmd_block
; /* 32 cmd blocks */
331 dma_addr_t cmd_block_dma
; /* DMA base addr for them */
335 static void sil24_dev_config(struct ata_device
*dev
);
336 static int sil24_scr_read(struct ata_link
*link
, unsigned sc_reg
, u32
*val
);
337 static int sil24_scr_write(struct ata_link
*link
, unsigned sc_reg
, u32 val
);
338 static int sil24_qc_defer(struct ata_queued_cmd
*qc
);
339 static void sil24_qc_prep(struct ata_queued_cmd
*qc
);
340 static unsigned int sil24_qc_issue(struct ata_queued_cmd
*qc
);
341 static bool sil24_qc_fill_rtf(struct ata_queued_cmd
*qc
);
342 static void sil24_pmp_attach(struct ata_port
*ap
);
343 static void sil24_pmp_detach(struct ata_port
*ap
);
344 static void sil24_freeze(struct ata_port
*ap
);
345 static void sil24_thaw(struct ata_port
*ap
);
346 static int sil24_softreset(struct ata_link
*link
, unsigned int *class,
347 unsigned long deadline
);
348 static int sil24_hardreset(struct ata_link
*link
, unsigned int *class,
349 unsigned long deadline
);
350 static int sil24_pmp_hardreset(struct ata_link
*link
, unsigned int *class,
351 unsigned long deadline
);
352 static void sil24_error_handler(struct ata_port
*ap
);
353 static void sil24_post_internal_cmd(struct ata_queued_cmd
*qc
);
354 static int sil24_port_start(struct ata_port
*ap
);
355 static int sil24_init_one(struct pci_dev
*pdev
, const struct pci_device_id
*ent
);
357 static int sil24_pci_device_resume(struct pci_dev
*pdev
);
358 static int sil24_port_resume(struct ata_port
*ap
);
361 static const struct pci_device_id sil24_pci_tbl
[] = {
362 { PCI_VDEVICE(CMD
, 0x3124), BID_SIL3124
},
363 { PCI_VDEVICE(INTEL
, 0x3124), BID_SIL3124
},
364 { PCI_VDEVICE(CMD
, 0x3132), BID_SIL3132
},
365 { PCI_VDEVICE(CMD
, 0x0242), BID_SIL3132
},
366 { PCI_VDEVICE(CMD
, 0x0244), BID_SIL3132
},
367 { PCI_VDEVICE(CMD
, 0x3131), BID_SIL3131
},
368 { PCI_VDEVICE(CMD
, 0x3531), BID_SIL3131
},
370 { } /* terminate list */
373 static struct pci_driver sil24_pci_driver
= {
375 .id_table
= sil24_pci_tbl
,
376 .probe
= sil24_init_one
,
377 .remove
= ata_pci_remove_one
,
379 .suspend
= ata_pci_device_suspend
,
380 .resume
= sil24_pci_device_resume
,
384 static struct scsi_host_template sil24_sht
= {
385 ATA_NCQ_SHT(DRV_NAME
),
386 .can_queue
= SIL24_MAX_CMDS
,
387 .sg_tablesize
= SIL24_MAX_SGE
,
388 .dma_boundary
= ATA_DMA_BOUNDARY
,
391 static struct ata_port_operations sil24_ops
= {
392 .inherits
= &sata_pmp_port_ops
,
394 .qc_defer
= sil24_qc_defer
,
395 .qc_prep
= sil24_qc_prep
,
396 .qc_issue
= sil24_qc_issue
,
397 .qc_fill_rtf
= sil24_qc_fill_rtf
,
399 .freeze
= sil24_freeze
,
401 .softreset
= sil24_softreset
,
402 .hardreset
= sil24_hardreset
,
403 .pmp_softreset
= sil24_softreset
,
404 .pmp_hardreset
= sil24_pmp_hardreset
,
405 .error_handler
= sil24_error_handler
,
406 .post_internal_cmd
= sil24_post_internal_cmd
,
407 .dev_config
= sil24_dev_config
,
409 .scr_read
= sil24_scr_read
,
410 .scr_write
= sil24_scr_write
,
411 .pmp_attach
= sil24_pmp_attach
,
412 .pmp_detach
= sil24_pmp_detach
,
414 .port_start
= sil24_port_start
,
416 .port_resume
= sil24_port_resume
,
420 static bool sata_sil24_msi
; /* Disable MSI */
421 module_param_named(msi
, sata_sil24_msi
, bool, S_IRUGO
);
422 MODULE_PARM_DESC(msi
, "Enable MSI (Default: false)");
425 * Use bits 30-31 of port_flags to encode available port numbers.
426 * Current maxium is 4.
428 #define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
429 #define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
431 static const struct ata_port_info sil24_port_info
[] = {
434 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(4) |
435 SIL24_FLAG_PCIX_IRQ_WOC
,
436 .pio_mask
= ATA_PIO4
,
437 .mwdma_mask
= ATA_MWDMA2
,
438 .udma_mask
= ATA_UDMA5
,
439 .port_ops
= &sil24_ops
,
443 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(2),
444 .pio_mask
= ATA_PIO4
,
445 .mwdma_mask
= ATA_MWDMA2
,
446 .udma_mask
= ATA_UDMA5
,
447 .port_ops
= &sil24_ops
,
449 /* sil_3131/sil_3531 */
451 .flags
= SIL24_COMMON_FLAGS
| SIL24_NPORTS2FLAG(1),
452 .pio_mask
= ATA_PIO4
,
453 .mwdma_mask
= ATA_MWDMA2
,
454 .udma_mask
= ATA_UDMA5
,
455 .port_ops
= &sil24_ops
,
459 static int sil24_tag(int tag
)
461 if (unlikely(ata_tag_internal(tag
)))
466 static unsigned long sil24_port_offset(struct ata_port
*ap
)
468 return ap
->port_no
* PORT_REGS_SIZE
;
471 static void __iomem
*sil24_port_base(struct ata_port
*ap
)
473 return ap
->host
->iomap
[SIL24_PORT_BAR
] + sil24_port_offset(ap
);
476 static void sil24_dev_config(struct ata_device
*dev
)
478 void __iomem
*port
= sil24_port_base(dev
->link
->ap
);
480 if (dev
->cdb_len
== 16)
481 writel(PORT_CS_CDB16
, port
+ PORT_CTRL_STAT
);
483 writel(PORT_CS_CDB16
, port
+ PORT_CTRL_CLR
);
486 static void sil24_read_tf(struct ata_port
*ap
, int tag
, struct ata_taskfile
*tf
)
488 void __iomem
*port
= sil24_port_base(ap
);
489 struct sil24_prb __iomem
*prb
;
492 prb
= port
+ PORT_LRAM
+ sil24_tag(tag
) * PORT_LRAM_SLOT_SZ
;
493 memcpy_fromio(fis
, prb
->fis
, sizeof(fis
));
494 ata_tf_from_fis(fis
, tf
);
497 static int sil24_scr_map
[] = {
504 static int sil24_scr_read(struct ata_link
*link
, unsigned sc_reg
, u32
*val
)
506 void __iomem
*scr_addr
= sil24_port_base(link
->ap
) + PORT_SCONTROL
;
508 if (sc_reg
< ARRAY_SIZE(sil24_scr_map
)) {
510 addr
= scr_addr
+ sil24_scr_map
[sc_reg
] * 4;
511 *val
= readl(scr_addr
+ sil24_scr_map
[sc_reg
] * 4);
517 static int sil24_scr_write(struct ata_link
*link
, unsigned sc_reg
, u32 val
)
519 void __iomem
*scr_addr
= sil24_port_base(link
->ap
) + PORT_SCONTROL
;
521 if (sc_reg
< ARRAY_SIZE(sil24_scr_map
)) {
523 addr
= scr_addr
+ sil24_scr_map
[sc_reg
] * 4;
524 writel(val
, scr_addr
+ sil24_scr_map
[sc_reg
] * 4);
530 static void sil24_config_port(struct ata_port
*ap
)
532 void __iomem
*port
= sil24_port_base(ap
);
534 /* configure IRQ WoC */
535 if (ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
)
536 writel(PORT_CS_IRQ_WOC
, port
+ PORT_CTRL_STAT
);
538 writel(PORT_CS_IRQ_WOC
, port
+ PORT_CTRL_CLR
);
540 /* zero error counters. */
541 writew(0x8000, port
+ PORT_DECODE_ERR_THRESH
);
542 writew(0x8000, port
+ PORT_CRC_ERR_THRESH
);
543 writew(0x8000, port
+ PORT_HSHK_ERR_THRESH
);
544 writew(0x0000, port
+ PORT_DECODE_ERR_CNT
);
545 writew(0x0000, port
+ PORT_CRC_ERR_CNT
);
546 writew(0x0000, port
+ PORT_HSHK_ERR_CNT
);
548 /* always use 64bit activation */
549 writel(PORT_CS_32BIT_ACTV
, port
+ PORT_CTRL_CLR
);
551 /* clear port multiplier enable and resume bits */
552 writel(PORT_CS_PMP_EN
| PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_CLR
);
555 static void sil24_config_pmp(struct ata_port
*ap
, int attached
)
557 void __iomem
*port
= sil24_port_base(ap
);
560 writel(PORT_CS_PMP_EN
, port
+ PORT_CTRL_STAT
);
562 writel(PORT_CS_PMP_EN
, port
+ PORT_CTRL_CLR
);
565 static void sil24_clear_pmp(struct ata_port
*ap
)
567 void __iomem
*port
= sil24_port_base(ap
);
570 writel(PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_CLR
);
572 for (i
= 0; i
< SATA_PMP_MAX_PORTS
; i
++) {
573 void __iomem
*pmp_base
= port
+ PORT_PMP
+ i
* PORT_PMP_SIZE
;
575 writel(0, pmp_base
+ PORT_PMP_STATUS
);
576 writel(0, pmp_base
+ PORT_PMP_QACTIVE
);
580 static int sil24_init_port(struct ata_port
*ap
)
582 void __iomem
*port
= sil24_port_base(ap
);
583 struct sil24_port_priv
*pp
= ap
->private_data
;
586 /* clear PMP error status */
587 if (sata_pmp_attached(ap
))
590 writel(PORT_CS_INIT
, port
+ PORT_CTRL_STAT
);
591 ata_wait_register(ap
, port
+ PORT_CTRL_STAT
,
592 PORT_CS_INIT
, PORT_CS_INIT
, 10, 100);
593 tmp
= ata_wait_register(ap
, port
+ PORT_CTRL_STAT
,
594 PORT_CS_RDY
, 0, 10, 100);
596 if ((tmp
& (PORT_CS_INIT
| PORT_CS_RDY
)) != PORT_CS_RDY
) {
598 ap
->link
.eh_context
.i
.action
|= ATA_EH_RESET
;
605 static int sil24_exec_polled_cmd(struct ata_port
*ap
, int pmp
,
606 const struct ata_taskfile
*tf
,
607 int is_cmd
, u32 ctrl
,
608 unsigned long timeout_msec
)
610 void __iomem
*port
= sil24_port_base(ap
);
611 struct sil24_port_priv
*pp
= ap
->private_data
;
612 struct sil24_prb
*prb
= &pp
->cmd_block
[0].ata
.prb
;
613 dma_addr_t paddr
= pp
->cmd_block_dma
;
614 u32 irq_enabled
, irq_mask
, irq_stat
;
617 prb
->ctrl
= cpu_to_le16(ctrl
);
618 ata_tf_to_fis(tf
, pmp
, is_cmd
, prb
->fis
);
620 /* temporarily plug completion and error interrupts */
621 irq_enabled
= readl(port
+ PORT_IRQ_ENABLE_SET
);
622 writel(PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
, port
+ PORT_IRQ_ENABLE_CLR
);
625 * The barrier is required to ensure that writes to cmd_block reach
626 * the memory before the write to PORT_CMD_ACTIVATE.
629 writel((u32
)paddr
, port
+ PORT_CMD_ACTIVATE
);
630 writel((u64
)paddr
>> 32, port
+ PORT_CMD_ACTIVATE
+ 4);
632 irq_mask
= (PORT_IRQ_COMPLETE
| PORT_IRQ_ERROR
) << PORT_IRQ_RAW_SHIFT
;
633 irq_stat
= ata_wait_register(ap
, port
+ PORT_IRQ_STAT
, irq_mask
, 0x0,
636 writel(irq_mask
, port
+ PORT_IRQ_STAT
); /* clear IRQs */
637 irq_stat
>>= PORT_IRQ_RAW_SHIFT
;
639 if (irq_stat
& PORT_IRQ_COMPLETE
)
642 /* force port into known state */
645 if (irq_stat
& PORT_IRQ_ERROR
)
651 /* restore IRQ enabled */
652 writel(irq_enabled
, port
+ PORT_IRQ_ENABLE_SET
);
657 static int sil24_softreset(struct ata_link
*link
, unsigned int *class,
658 unsigned long deadline
)
660 struct ata_port
*ap
= link
->ap
;
661 int pmp
= sata_srst_pmp(link
);
662 unsigned long timeout_msec
= 0;
663 struct ata_taskfile tf
;
669 /* put the port into known state */
670 if (sil24_init_port(ap
)) {
671 reason
= "port not ready";
676 if (time_after(deadline
, jiffies
))
677 timeout_msec
= jiffies_to_msecs(deadline
- jiffies
);
679 ata_tf_init(link
->device
, &tf
); /* doesn't really matter */
680 rc
= sil24_exec_polled_cmd(ap
, pmp
, &tf
, 0, PRB_CTRL_SRST
,
686 reason
= "SRST command error";
690 sil24_read_tf(ap
, 0, &tf
);
691 *class = ata_dev_classify(&tf
);
693 DPRINTK("EXIT, class=%u\n", *class);
697 ata_link_err(link
, "softreset failed (%s)\n", reason
);
701 static int sil24_hardreset(struct ata_link
*link
, unsigned int *class,
702 unsigned long deadline
)
704 struct ata_port
*ap
= link
->ap
;
705 void __iomem
*port
= sil24_port_base(ap
);
706 struct sil24_port_priv
*pp
= ap
->private_data
;
707 int did_port_rst
= 0;
713 /* Sometimes, DEV_RST is not enough to recover the controller.
714 * This happens often after PM DMA CS errata.
716 if (pp
->do_port_rst
) {
718 "controller in dubious state, performing PORT_RST\n");
720 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_STAT
);
722 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_CLR
);
723 ata_wait_register(ap
, port
+ PORT_CTRL_STAT
, PORT_CS_RDY
, 0,
726 /* restore port configuration */
727 sil24_config_port(ap
);
728 sil24_config_pmp(ap
, ap
->nr_pmp_links
);
734 /* sil24 does the right thing(tm) without any protection */
738 if (ata_link_online(link
))
741 writel(PORT_CS_DEV_RST
, port
+ PORT_CTRL_STAT
);
742 tmp
= ata_wait_register(ap
, port
+ PORT_CTRL_STAT
,
743 PORT_CS_DEV_RST
, PORT_CS_DEV_RST
, 10,
746 /* SStatus oscillates between zero and valid status after
747 * DEV_RST, debounce it.
749 rc
= sata_link_debounce(link
, sata_deb_timing_long
, deadline
);
751 reason
= "PHY debouncing failed";
755 if (tmp
& PORT_CS_DEV_RST
) {
756 if (ata_link_offline(link
))
758 reason
= "link not ready";
762 /* Sil24 doesn't store signature FIS after hardreset, so we
763 * can't wait for BSY to clear. Some devices take a long time
764 * to get ready and those devices will choke if we don't wait
765 * for BSY clearance here. Tell libata to perform follow-up
776 ata_link_err(link
, "hardreset failed (%s)\n", reason
);
780 static inline void sil24_fill_sg(struct ata_queued_cmd
*qc
,
781 struct sil24_sge
*sge
)
783 struct scatterlist
*sg
;
784 struct sil24_sge
*last_sge
= NULL
;
787 for_each_sg(qc
->sg
, sg
, qc
->n_elem
, si
) {
788 sge
->addr
= cpu_to_le64(sg_dma_address(sg
));
789 sge
->cnt
= cpu_to_le32(sg_dma_len(sg
));
796 last_sge
->flags
= cpu_to_le32(SGE_TRM
);
799 static int sil24_qc_defer(struct ata_queued_cmd
*qc
)
801 struct ata_link
*link
= qc
->dev
->link
;
802 struct ata_port
*ap
= link
->ap
;
803 u8 prot
= qc
->tf
.protocol
;
806 * There is a bug in the chip:
807 * Port LRAM Causes the PRB/SGT Data to be Corrupted
808 * If the host issues a read request for LRAM and SActive registers
809 * while active commands are available in the port, PRB/SGT data in
810 * the LRAM can become corrupted. This issue applies only when
811 * reading from, but not writing to, the LRAM.
813 * Therefore, reading LRAM when there is no particular error [and
814 * other commands may be outstanding] is prohibited.
816 * To avoid this bug there are two situations where a command must run
817 * exclusive of any other commands on the port:
819 * - ATAPI commands which check the sense data
820 * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
824 int is_excl
= (ata_is_atapi(prot
) ||
825 (qc
->flags
& ATA_QCFLAG_RESULT_TF
));
827 if (unlikely(ap
->excl_link
)) {
828 if (link
== ap
->excl_link
) {
829 if (ap
->nr_active_links
)
830 return ATA_DEFER_PORT
;
831 qc
->flags
|= ATA_QCFLAG_CLEAR_EXCL
;
833 return ATA_DEFER_PORT
;
834 } else if (unlikely(is_excl
)) {
835 ap
->excl_link
= link
;
836 if (ap
->nr_active_links
)
837 return ATA_DEFER_PORT
;
838 qc
->flags
|= ATA_QCFLAG_CLEAR_EXCL
;
841 return ata_std_qc_defer(qc
);
844 static void sil24_qc_prep(struct ata_queued_cmd
*qc
)
846 struct ata_port
*ap
= qc
->ap
;
847 struct sil24_port_priv
*pp
= ap
->private_data
;
848 union sil24_cmd_block
*cb
;
849 struct sil24_prb
*prb
;
850 struct sil24_sge
*sge
;
853 cb
= &pp
->cmd_block
[sil24_tag(qc
->tag
)];
855 if (!ata_is_atapi(qc
->tf
.protocol
)) {
858 if (ata_is_data(qc
->tf
.protocol
)) {
860 ctrl
= PRB_CTRL_PROTOCOL
;
861 if (ata_is_ncq(qc
->tf
.protocol
))
862 prot
|= PRB_PROT_NCQ
;
863 if (qc
->tf
.flags
& ATA_TFLAG_WRITE
)
864 prot
|= PRB_PROT_WRITE
;
866 prot
|= PRB_PROT_READ
;
867 prb
->prot
= cpu_to_le16(prot
);
870 prb
= &cb
->atapi
.prb
;
872 memset(cb
->atapi
.cdb
, 0, sizeof(cb
->atapi
.cdb
));
873 memcpy(cb
->atapi
.cdb
, qc
->cdb
, qc
->dev
->cdb_len
);
875 if (ata_is_data(qc
->tf
.protocol
)) {
876 if (qc
->tf
.flags
& ATA_TFLAG_WRITE
)
877 ctrl
= PRB_CTRL_PACKET_WRITE
;
879 ctrl
= PRB_CTRL_PACKET_READ
;
883 prb
->ctrl
= cpu_to_le16(ctrl
);
884 ata_tf_to_fis(&qc
->tf
, qc
->dev
->link
->pmp
, 1, prb
->fis
);
886 if (qc
->flags
& ATA_QCFLAG_DMAMAP
)
887 sil24_fill_sg(qc
, sge
);
890 static unsigned int sil24_qc_issue(struct ata_queued_cmd
*qc
)
892 struct ata_port
*ap
= qc
->ap
;
893 struct sil24_port_priv
*pp
= ap
->private_data
;
894 void __iomem
*port
= sil24_port_base(ap
);
895 unsigned int tag
= sil24_tag(qc
->tag
);
897 void __iomem
*activate
;
899 paddr
= pp
->cmd_block_dma
+ tag
* sizeof(*pp
->cmd_block
);
900 activate
= port
+ PORT_CMD_ACTIVATE
+ tag
* 8;
903 * The barrier is required to ensure that writes to cmd_block reach
904 * the memory before the write to PORT_CMD_ACTIVATE.
907 writel((u32
)paddr
, activate
);
908 writel((u64
)paddr
>> 32, activate
+ 4);
913 static bool sil24_qc_fill_rtf(struct ata_queued_cmd
*qc
)
915 sil24_read_tf(qc
->ap
, qc
->tag
, &qc
->result_tf
);
919 static void sil24_pmp_attach(struct ata_port
*ap
)
921 u32
*gscr
= ap
->link
.device
->gscr
;
923 sil24_config_pmp(ap
, 1);
926 if (sata_pmp_gscr_vendor(gscr
) == 0x11ab &&
927 sata_pmp_gscr_devid(gscr
) == 0x4140) {
929 "disabling NCQ support due to sil24-mv4140 quirk\n");
930 ap
->flags
&= ~ATA_FLAG_NCQ
;
934 static void sil24_pmp_detach(struct ata_port
*ap
)
937 sil24_config_pmp(ap
, 0);
939 ap
->flags
|= ATA_FLAG_NCQ
;
942 static int sil24_pmp_hardreset(struct ata_link
*link
, unsigned int *class,
943 unsigned long deadline
)
947 rc
= sil24_init_port(link
->ap
);
949 ata_link_err(link
, "hardreset failed (port not ready)\n");
953 return sata_std_hardreset(link
, class, deadline
);
956 static void sil24_freeze(struct ata_port
*ap
)
958 void __iomem
*port
= sil24_port_base(ap
);
960 /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
961 * PORT_IRQ_ENABLE instead.
963 writel(0xffff, port
+ PORT_IRQ_ENABLE_CLR
);
966 static void sil24_thaw(struct ata_port
*ap
)
968 void __iomem
*port
= sil24_port_base(ap
);
972 tmp
= readl(port
+ PORT_IRQ_STAT
);
973 writel(tmp
, port
+ PORT_IRQ_STAT
);
975 /* turn IRQ back on */
976 writel(DEF_PORT_IRQ
, port
+ PORT_IRQ_ENABLE_SET
);
979 static void sil24_error_intr(struct ata_port
*ap
)
981 void __iomem
*port
= sil24_port_base(ap
);
982 struct sil24_port_priv
*pp
= ap
->private_data
;
983 struct ata_queued_cmd
*qc
= NULL
;
984 struct ata_link
*link
;
985 struct ata_eh_info
*ehi
;
986 int abort
= 0, freeze
= 0;
989 /* on error, we need to clear IRQ explicitly */
990 irq_stat
= readl(port
+ PORT_IRQ_STAT
);
991 writel(irq_stat
, port
+ PORT_IRQ_STAT
);
993 /* first, analyze and record host port events */
995 ehi
= &link
->eh_info
;
996 ata_ehi_clear_desc(ehi
);
998 ata_ehi_push_desc(ehi
, "irq_stat 0x%08x", irq_stat
);
1000 if (irq_stat
& PORT_IRQ_SDB_NOTIFY
) {
1001 ata_ehi_push_desc(ehi
, "SDB notify");
1002 sata_async_notification(ap
);
1005 if (irq_stat
& (PORT_IRQ_PHYRDY_CHG
| PORT_IRQ_DEV_XCHG
)) {
1006 ata_ehi_hotplugged(ehi
);
1007 ata_ehi_push_desc(ehi
, "%s",
1008 irq_stat
& PORT_IRQ_PHYRDY_CHG
?
1009 "PHY RDY changed" : "device exchanged");
1013 if (irq_stat
& PORT_IRQ_UNK_FIS
) {
1014 ehi
->err_mask
|= AC_ERR_HSM
;
1015 ehi
->action
|= ATA_EH_RESET
;
1016 ata_ehi_push_desc(ehi
, "unknown FIS");
1020 /* deal with command error */
1021 if (irq_stat
& PORT_IRQ_ERROR
) {
1022 const struct sil24_cerr_info
*ci
= NULL
;
1023 unsigned int err_mask
= 0, action
= 0;
1029 /* DMA Context Switch Failure in Port Multiplier Mode
1030 * errata. If we have active commands to 3 or more
1031 * devices, any error condition on active devices can
1032 * corrupt DMA context switching.
1034 if (ap
->nr_active_links
>= 3) {
1035 ehi
->err_mask
|= AC_ERR_OTHER
;
1036 ehi
->action
|= ATA_EH_RESET
;
1037 ata_ehi_push_desc(ehi
, "PMP DMA CS errata");
1038 pp
->do_port_rst
= 1;
1042 /* find out the offending link and qc */
1043 if (sata_pmp_attached(ap
)) {
1044 context
= readl(port
+ PORT_CONTEXT
);
1045 pmp
= (context
>> 5) & 0xf;
1047 if (pmp
< ap
->nr_pmp_links
) {
1048 link
= &ap
->pmp_link
[pmp
];
1049 ehi
= &link
->eh_info
;
1050 qc
= ata_qc_from_tag(ap
, link
->active_tag
);
1052 ata_ehi_clear_desc(ehi
);
1053 ata_ehi_push_desc(ehi
, "irq_stat 0x%08x",
1056 err_mask
|= AC_ERR_HSM
;
1057 action
|= ATA_EH_RESET
;
1061 qc
= ata_qc_from_tag(ap
, link
->active_tag
);
1063 /* analyze CMD_ERR */
1064 cerr
= readl(port
+ PORT_CMD_ERR
);
1065 if (cerr
< ARRAY_SIZE(sil24_cerr_db
))
1066 ci
= &sil24_cerr_db
[cerr
];
1068 if (ci
&& ci
->desc
) {
1069 err_mask
|= ci
->err_mask
;
1070 action
|= ci
->action
;
1071 if (action
& ATA_EH_RESET
)
1073 ata_ehi_push_desc(ehi
, "%s", ci
->desc
);
1075 err_mask
|= AC_ERR_OTHER
;
1076 action
|= ATA_EH_RESET
;
1078 ata_ehi_push_desc(ehi
, "unknown command error %d",
1082 /* record error info */
1084 qc
->err_mask
|= err_mask
;
1086 ehi
->err_mask
|= err_mask
;
1088 ehi
->action
|= action
;
1090 /* if PMP, resume */
1091 if (sata_pmp_attached(ap
))
1092 writel(PORT_CS_PMP_RESUME
, port
+ PORT_CTRL_STAT
);
1095 /* freeze or abort */
1097 ata_port_freeze(ap
);
1100 ata_link_abort(qc
->dev
->link
);
1106 static inline void sil24_host_intr(struct ata_port
*ap
)
1108 void __iomem
*port
= sil24_port_base(ap
);
1109 u32 slot_stat
, qc_active
;
1112 /* If PCIX_IRQ_WOC, there's an inherent race window between
1113 * clearing IRQ pending status and reading PORT_SLOT_STAT
1114 * which may cause spurious interrupts afterwards. This is
1115 * unavoidable and much better than losing interrupts which
1116 * happens if IRQ pending is cleared after reading
1119 if (ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
)
1120 writel(PORT_IRQ_COMPLETE
, port
+ PORT_IRQ_STAT
);
1122 slot_stat
= readl(port
+ PORT_SLOT_STAT
);
1124 if (unlikely(slot_stat
& HOST_SSTAT_ATTN
)) {
1125 sil24_error_intr(ap
);
1129 qc_active
= slot_stat
& ~HOST_SSTAT_ATTN
;
1130 rc
= ata_qc_complete_multiple(ap
, qc_active
);
1134 struct ata_eh_info
*ehi
= &ap
->link
.eh_info
;
1135 ehi
->err_mask
|= AC_ERR_HSM
;
1136 ehi
->action
|= ATA_EH_RESET
;
1137 ata_port_freeze(ap
);
1141 /* spurious interrupts are expected if PCIX_IRQ_WOC */
1142 if (!(ap
->flags
& SIL24_FLAG_PCIX_IRQ_WOC
) && ata_ratelimit())
1144 "spurious interrupt (slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1145 slot_stat
, ap
->link
.active_tag
, ap
->link
.sactive
);
1148 static irqreturn_t
sil24_interrupt(int irq
, void *dev_instance
)
1150 struct ata_host
*host
= dev_instance
;
1151 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1152 unsigned handled
= 0;
1156 status
= readl(host_base
+ HOST_IRQ_STAT
);
1158 if (status
== 0xffffffff) {
1159 printk(KERN_ERR DRV_NAME
": IRQ status == 0xffffffff, "
1160 "PCI fault or device removal?\n");
1164 if (!(status
& IRQ_STAT_4PORTS
))
1167 spin_lock(&host
->lock
);
1169 for (i
= 0; i
< host
->n_ports
; i
++)
1170 if (status
& (1 << i
)) {
1171 sil24_host_intr(host
->ports
[i
]);
1175 spin_unlock(&host
->lock
);
1177 return IRQ_RETVAL(handled
);
1180 static void sil24_error_handler(struct ata_port
*ap
)
1182 struct sil24_port_priv
*pp
= ap
->private_data
;
1184 if (sil24_init_port(ap
))
1185 ata_eh_freeze_port(ap
);
1187 sata_pmp_error_handler(ap
);
1189 pp
->do_port_rst
= 0;
1192 static void sil24_post_internal_cmd(struct ata_queued_cmd
*qc
)
1194 struct ata_port
*ap
= qc
->ap
;
1196 /* make DMA engine forget about the failed command */
1197 if ((qc
->flags
& ATA_QCFLAG_FAILED
) && sil24_init_port(ap
))
1198 ata_eh_freeze_port(ap
);
1201 static int sil24_port_start(struct ata_port
*ap
)
1203 struct device
*dev
= ap
->host
->dev
;
1204 struct sil24_port_priv
*pp
;
1205 union sil24_cmd_block
*cb
;
1206 size_t cb_size
= sizeof(*cb
) * SIL24_MAX_CMDS
;
1209 pp
= devm_kzalloc(dev
, sizeof(*pp
), GFP_KERNEL
);
1213 cb
= dmam_alloc_coherent(dev
, cb_size
, &cb_dma
, GFP_KERNEL
);
1216 memset(cb
, 0, cb_size
);
1219 pp
->cmd_block_dma
= cb_dma
;
1221 ap
->private_data
= pp
;
1223 ata_port_pbar_desc(ap
, SIL24_HOST_BAR
, -1, "host");
1224 ata_port_pbar_desc(ap
, SIL24_PORT_BAR
, sil24_port_offset(ap
), "port");
1229 static void sil24_init_controller(struct ata_host
*host
)
1231 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1236 writel(0, host_base
+ HOST_FLASH_CMD
);
1238 /* clear global reset & mask interrupts during initialization */
1239 writel(0, host_base
+ HOST_CTRL
);
1242 for (i
= 0; i
< host
->n_ports
; i
++) {
1243 struct ata_port
*ap
= host
->ports
[i
];
1244 void __iomem
*port
= sil24_port_base(ap
);
1247 /* Initial PHY setting */
1248 writel(0x20c, port
+ PORT_PHY_CFG
);
1250 /* Clear port RST */
1251 tmp
= readl(port
+ PORT_CTRL_STAT
);
1252 if (tmp
& PORT_CS_PORT_RST
) {
1253 writel(PORT_CS_PORT_RST
, port
+ PORT_CTRL_CLR
);
1254 tmp
= ata_wait_register(NULL
, port
+ PORT_CTRL_STAT
,
1256 PORT_CS_PORT_RST
, 10, 100);
1257 if (tmp
& PORT_CS_PORT_RST
)
1259 "failed to clear port RST\n");
1262 /* configure port */
1263 sil24_config_port(ap
);
1266 /* Turn on interrupts */
1267 writel(IRQ_STAT_4PORTS
, host_base
+ HOST_CTRL
);
1270 static int sil24_init_one(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
1272 extern int __MARKER__sil24_cmd_block_is_sized_wrongly
;
1273 struct ata_port_info pi
= sil24_port_info
[ent
->driver_data
];
1274 const struct ata_port_info
*ppi
[] = { &pi
, NULL
};
1275 void __iomem
* const *iomap
;
1276 struct ata_host
*host
;
1280 /* cause link error if sil24_cmd_block is sized wrongly */
1281 if (sizeof(union sil24_cmd_block
) != PAGE_SIZE
)
1282 __MARKER__sil24_cmd_block_is_sized_wrongly
= 1;
1284 ata_print_version_once(&pdev
->dev
, DRV_VERSION
);
1286 /* acquire resources */
1287 rc
= pcim_enable_device(pdev
);
1291 rc
= pcim_iomap_regions(pdev
,
1292 (1 << SIL24_HOST_BAR
) | (1 << SIL24_PORT_BAR
),
1296 iomap
= pcim_iomap_table(pdev
);
1298 /* apply workaround for completion IRQ loss on PCI-X errata */
1299 if (pi
.flags
& SIL24_FLAG_PCIX_IRQ_WOC
) {
1300 tmp
= readl(iomap
[SIL24_HOST_BAR
] + HOST_CTRL
);
1301 if (tmp
& (HOST_CTRL_TRDY
| HOST_CTRL_STOP
| HOST_CTRL_DEVSEL
))
1302 dev_info(&pdev
->dev
,
1303 "Applying completion IRQ loss on PCI-X errata fix\n");
1305 pi
.flags
&= ~SIL24_FLAG_PCIX_IRQ_WOC
;
1308 /* allocate and fill host */
1309 host
= ata_host_alloc_pinfo(&pdev
->dev
, ppi
,
1310 SIL24_FLAG2NPORTS(ppi
[0]->flags
));
1313 host
->iomap
= iomap
;
1315 /* configure and activate the device */
1316 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(64))) {
1317 rc
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(64));
1319 rc
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
1322 "64-bit DMA enable failed\n");
1327 rc
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
1329 dev_err(&pdev
->dev
, "32-bit DMA enable failed\n");
1332 rc
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
1335 "32-bit consistent DMA enable failed\n");
1340 /* Set max read request size to 4096. This slightly increases
1341 * write throughput for pci-e variants.
1343 pcie_set_readrq(pdev
, 4096);
1345 sil24_init_controller(host
);
1347 if (sata_sil24_msi
&& !pci_enable_msi(pdev
)) {
1348 dev_info(&pdev
->dev
, "Using MSI\n");
1352 pci_set_master(pdev
);
1353 return ata_host_activate(host
, pdev
->irq
, sil24_interrupt
, IRQF_SHARED
,
1358 static int sil24_pci_device_resume(struct pci_dev
*pdev
)
1360 struct ata_host
*host
= dev_get_drvdata(&pdev
->dev
);
1361 void __iomem
*host_base
= host
->iomap
[SIL24_HOST_BAR
];
1364 rc
= ata_pci_device_do_resume(pdev
);
1368 if (pdev
->dev
.power
.power_state
.event
== PM_EVENT_SUSPEND
)
1369 writel(HOST_CTRL_GLOBAL_RST
, host_base
+ HOST_CTRL
);
1371 sil24_init_controller(host
);
1373 ata_host_resume(host
);
1378 static int sil24_port_resume(struct ata_port
*ap
)
1380 sil24_config_pmp(ap
, ap
->nr_pmp_links
);
1385 static int __init
sil24_init(void)
1387 return pci_register_driver(&sil24_pci_driver
);
1390 static void __exit
sil24_exit(void)
1392 pci_unregister_driver(&sil24_pci_driver
);
1395 MODULE_AUTHOR("Tejun Heo");
1396 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1397 MODULE_LICENSE("GPL");
1398 MODULE_DEVICE_TABLE(pci
, sil24_pci_tbl
);
1400 module_init(sil24_init
);
1401 module_exit(sil24_exit
);