4 * Copyright (C) 1991, 1992, 2002 Linus Torvalds
8 * Start bdflush() with kernel_thread not syscall - Paul Gortmaker, 12/95
10 * Removed a lot of unnecessary code and simplified things now that
11 * the buffer cache isn't our primary cache - Andrew Tridgell 12/96
13 * Speed up hash, lru, and free list operations. Use gfp() for allocating
14 * hash table, use SLAB cache for buffer heads. SMP threading. -DaveM
16 * Added 32k buffer block sizes - these are required older ARM systems. - RMK
18 * async buffer flushing, 1999 Andrea Arcangeli <andrea@suse.de>
21 #include <linux/kernel.h>
22 #include <linux/syscalls.h>
25 #include <linux/percpu.h>
26 #include <linux/slab.h>
27 #include <linux/capability.h>
28 #include <linux/blkdev.h>
29 #include <linux/file.h>
30 #include <linux/quotaops.h>
31 #include <linux/highmem.h>
32 #include <linux/export.h>
33 #include <linux/writeback.h>
34 #include <linux/hash.h>
35 #include <linux/suspend.h>
36 #include <linux/buffer_head.h>
37 #include <linux/task_io_accounting_ops.h>
38 #include <linux/bio.h>
39 #include <linux/notifier.h>
40 #include <linux/cpu.h>
41 #include <linux/bitops.h>
42 #include <linux/mpage.h>
43 #include <linux/bit_spinlock.h>
45 static int fsync_buffers_list(spinlock_t
*lock
, struct list_head
*list
);
47 #define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers)
50 init_buffer(struct buffer_head
*bh
, bh_end_io_t
*handler
, void *private)
52 bh
->b_end_io
= handler
;
53 bh
->b_private
= private;
55 EXPORT_SYMBOL(init_buffer
);
57 static int sleep_on_buffer(void *word
)
63 void __lock_buffer(struct buffer_head
*bh
)
65 wait_on_bit_lock(&bh
->b_state
, BH_Lock
, sleep_on_buffer
,
66 TASK_UNINTERRUPTIBLE
);
68 EXPORT_SYMBOL(__lock_buffer
);
70 void unlock_buffer(struct buffer_head
*bh
)
72 clear_bit_unlock(BH_Lock
, &bh
->b_state
);
73 smp_mb__after_clear_bit();
74 wake_up_bit(&bh
->b_state
, BH_Lock
);
76 EXPORT_SYMBOL(unlock_buffer
);
79 * Block until a buffer comes unlocked. This doesn't stop it
80 * from becoming locked again - you have to lock it yourself
81 * if you want to preserve its state.
83 void __wait_on_buffer(struct buffer_head
* bh
)
85 wait_on_bit(&bh
->b_state
, BH_Lock
, sleep_on_buffer
, TASK_UNINTERRUPTIBLE
);
87 EXPORT_SYMBOL(__wait_on_buffer
);
90 __clear_page_buffers(struct page
*page
)
92 ClearPagePrivate(page
);
93 set_page_private(page
, 0);
94 page_cache_release(page
);
98 static int quiet_error(struct buffer_head
*bh
)
100 if (!test_bit(BH_Quiet
, &bh
->b_state
) && printk_ratelimit())
106 static void buffer_io_error(struct buffer_head
*bh
)
108 char b
[BDEVNAME_SIZE
];
109 printk(KERN_ERR
"Buffer I/O error on device %s, logical block %Lu\n",
110 bdevname(bh
->b_bdev
, b
),
111 (unsigned long long)bh
->b_blocknr
);
115 * End-of-IO handler helper function which does not touch the bh after
117 * Note: unlock_buffer() sort-of does touch the bh after unlocking it, but
118 * a race there is benign: unlock_buffer() only use the bh's address for
119 * hashing after unlocking the buffer, so it doesn't actually touch the bh
122 static void __end_buffer_read_notouch(struct buffer_head
*bh
, int uptodate
)
125 set_buffer_uptodate(bh
);
127 /* This happens, due to failed READA attempts. */
128 clear_buffer_uptodate(bh
);
134 * Default synchronous end-of-IO handler.. Just mark it up-to-date and
135 * unlock the buffer. This is what ll_rw_block uses too.
137 void end_buffer_read_sync(struct buffer_head
*bh
, int uptodate
)
139 __end_buffer_read_notouch(bh
, uptodate
);
142 EXPORT_SYMBOL(end_buffer_read_sync
);
144 void end_buffer_write_sync(struct buffer_head
*bh
, int uptodate
)
146 char b
[BDEVNAME_SIZE
];
149 set_buffer_uptodate(bh
);
151 if (!quiet_error(bh
)) {
153 printk(KERN_WARNING
"lost page write due to "
155 bdevname(bh
->b_bdev
, b
));
157 set_buffer_write_io_error(bh
);
158 clear_buffer_uptodate(bh
);
163 EXPORT_SYMBOL(end_buffer_write_sync
);
166 * Various filesystems appear to want __find_get_block to be non-blocking.
167 * But it's the page lock which protects the buffers. To get around this,
168 * we get exclusion from try_to_free_buffers with the blockdev mapping's
171 * Hack idea: for the blockdev mapping, i_bufferlist_lock contention
172 * may be quite high. This code could TryLock the page, and if that
173 * succeeds, there is no need to take private_lock. (But if
174 * private_lock is contended then so is mapping->tree_lock).
176 static struct buffer_head
*
177 __find_get_block_slow(struct block_device
*bdev
, sector_t block
)
179 struct inode
*bd_inode
= bdev
->bd_inode
;
180 struct address_space
*bd_mapping
= bd_inode
->i_mapping
;
181 struct buffer_head
*ret
= NULL
;
183 struct buffer_head
*bh
;
184 struct buffer_head
*head
;
188 index
= block
>> (PAGE_CACHE_SHIFT
- bd_inode
->i_blkbits
);
189 page
= find_get_page(bd_mapping
, index
);
193 spin_lock(&bd_mapping
->private_lock
);
194 if (!page_has_buffers(page
))
196 head
= page_buffers(page
);
199 if (!buffer_mapped(bh
))
201 else if (bh
->b_blocknr
== block
) {
206 bh
= bh
->b_this_page
;
207 } while (bh
!= head
);
209 /* we might be here because some of the buffers on this page are
210 * not mapped. This is due to various races between
211 * file io on the block device and getblk. It gets dealt with
212 * elsewhere, don't buffer_error if we had some unmapped buffers
215 char b
[BDEVNAME_SIZE
];
217 printk("__find_get_block_slow() failed. "
218 "block=%llu, b_blocknr=%llu\n",
219 (unsigned long long)block
,
220 (unsigned long long)bh
->b_blocknr
);
221 printk("b_state=0x%08lx, b_size=%zu\n",
222 bh
->b_state
, bh
->b_size
);
223 printk("device %s blocksize: %d\n", bdevname(bdev
, b
),
224 1 << bd_inode
->i_blkbits
);
227 spin_unlock(&bd_mapping
->private_lock
);
228 page_cache_release(page
);
234 * Kick the writeback threads then try to free up some ZONE_NORMAL memory.
236 static void free_more_memory(void)
241 wakeup_flusher_threads(1024, WB_REASON_FREE_MORE_MEM
);
244 for_each_online_node(nid
) {
245 (void)first_zones_zonelist(node_zonelist(nid
, GFP_NOFS
),
246 gfp_zone(GFP_NOFS
), NULL
,
249 try_to_free_pages(node_zonelist(nid
, GFP_NOFS
), 0,
255 * I/O completion handler for block_read_full_page() - pages
256 * which come unlocked at the end of I/O.
258 static void end_buffer_async_read(struct buffer_head
*bh
, int uptodate
)
261 struct buffer_head
*first
;
262 struct buffer_head
*tmp
;
264 int page_uptodate
= 1;
266 BUG_ON(!buffer_async_read(bh
));
270 set_buffer_uptodate(bh
);
272 clear_buffer_uptodate(bh
);
273 if (!quiet_error(bh
))
279 * Be _very_ careful from here on. Bad things can happen if
280 * two buffer heads end IO at almost the same time and both
281 * decide that the page is now completely done.
283 first
= page_buffers(page
);
284 local_irq_save(flags
);
285 bit_spin_lock(BH_Uptodate_Lock
, &first
->b_state
);
286 clear_buffer_async_read(bh
);
290 if (!buffer_uptodate(tmp
))
292 if (buffer_async_read(tmp
)) {
293 BUG_ON(!buffer_locked(tmp
));
296 tmp
= tmp
->b_this_page
;
298 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
299 local_irq_restore(flags
);
302 * If none of the buffers had errors and they are all
303 * uptodate then we can set the page uptodate.
305 if (page_uptodate
&& !PageError(page
))
306 SetPageUptodate(page
);
311 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
312 local_irq_restore(flags
);
317 * Completion handler for block_write_full_page() - pages which are unlocked
318 * during I/O, and which have PageWriteback cleared upon I/O completion.
320 void end_buffer_async_write(struct buffer_head
*bh
, int uptodate
)
322 char b
[BDEVNAME_SIZE
];
324 struct buffer_head
*first
;
325 struct buffer_head
*tmp
;
328 BUG_ON(!buffer_async_write(bh
));
332 set_buffer_uptodate(bh
);
334 if (!quiet_error(bh
)) {
336 printk(KERN_WARNING
"lost page write due to "
338 bdevname(bh
->b_bdev
, b
));
340 set_bit(AS_EIO
, &page
->mapping
->flags
);
341 set_buffer_write_io_error(bh
);
342 clear_buffer_uptodate(bh
);
346 first
= page_buffers(page
);
347 local_irq_save(flags
);
348 bit_spin_lock(BH_Uptodate_Lock
, &first
->b_state
);
350 clear_buffer_async_write(bh
);
352 tmp
= bh
->b_this_page
;
354 if (buffer_async_write(tmp
)) {
355 BUG_ON(!buffer_locked(tmp
));
358 tmp
= tmp
->b_this_page
;
360 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
361 local_irq_restore(flags
);
362 end_page_writeback(page
);
366 bit_spin_unlock(BH_Uptodate_Lock
, &first
->b_state
);
367 local_irq_restore(flags
);
370 EXPORT_SYMBOL(end_buffer_async_write
);
373 * If a page's buffers are under async readin (end_buffer_async_read
374 * completion) then there is a possibility that another thread of
375 * control could lock one of the buffers after it has completed
376 * but while some of the other buffers have not completed. This
377 * locked buffer would confuse end_buffer_async_read() into not unlocking
378 * the page. So the absence of BH_Async_Read tells end_buffer_async_read()
379 * that this buffer is not under async I/O.
381 * The page comes unlocked when it has no locked buffer_async buffers
384 * PageLocked prevents anyone starting new async I/O reads any of
387 * PageWriteback is used to prevent simultaneous writeout of the same
390 * PageLocked prevents anyone from starting writeback of a page which is
391 * under read I/O (PageWriteback is only ever set against a locked page).
393 static void mark_buffer_async_read(struct buffer_head
*bh
)
395 bh
->b_end_io
= end_buffer_async_read
;
396 set_buffer_async_read(bh
);
399 static void mark_buffer_async_write_endio(struct buffer_head
*bh
,
400 bh_end_io_t
*handler
)
402 bh
->b_end_io
= handler
;
403 set_buffer_async_write(bh
);
406 void mark_buffer_async_write(struct buffer_head
*bh
)
408 mark_buffer_async_write_endio(bh
, end_buffer_async_write
);
410 EXPORT_SYMBOL(mark_buffer_async_write
);
414 * fs/buffer.c contains helper functions for buffer-backed address space's
415 * fsync functions. A common requirement for buffer-based filesystems is
416 * that certain data from the backing blockdev needs to be written out for
417 * a successful fsync(). For example, ext2 indirect blocks need to be
418 * written back and waited upon before fsync() returns.
420 * The functions mark_buffer_inode_dirty(), fsync_inode_buffers(),
421 * inode_has_buffers() and invalidate_inode_buffers() are provided for the
422 * management of a list of dependent buffers at ->i_mapping->private_list.
424 * Locking is a little subtle: try_to_free_buffers() will remove buffers
425 * from their controlling inode's queue when they are being freed. But
426 * try_to_free_buffers() will be operating against the *blockdev* mapping
427 * at the time, not against the S_ISREG file which depends on those buffers.
428 * So the locking for private_list is via the private_lock in the address_space
429 * which backs the buffers. Which is different from the address_space
430 * against which the buffers are listed. So for a particular address_space,
431 * mapping->private_lock does *not* protect mapping->private_list! In fact,
432 * mapping->private_list will always be protected by the backing blockdev's
435 * Which introduces a requirement: all buffers on an address_space's
436 * ->private_list must be from the same address_space: the blockdev's.
438 * address_spaces which do not place buffers at ->private_list via these
439 * utility functions are free to use private_lock and private_list for
440 * whatever they want. The only requirement is that list_empty(private_list)
441 * be true at clear_inode() time.
443 * FIXME: clear_inode should not call invalidate_inode_buffers(). The
444 * filesystems should do that. invalidate_inode_buffers() should just go
445 * BUG_ON(!list_empty).
447 * FIXME: mark_buffer_dirty_inode() is a data-plane operation. It should
448 * take an address_space, not an inode. And it should be called
449 * mark_buffer_dirty_fsync() to clearly define why those buffers are being
452 * FIXME: mark_buffer_dirty_inode() doesn't need to add the buffer to the
453 * list if it is already on a list. Because if the buffer is on a list,
454 * it *must* already be on the right one. If not, the filesystem is being
455 * silly. This will save a ton of locking. But first we have to ensure
456 * that buffers are taken *off* the old inode's list when they are freed
457 * (presumably in truncate). That requires careful auditing of all
458 * filesystems (do it inside bforget()). It could also be done by bringing
463 * The buffer's backing address_space's private_lock must be held
465 static void __remove_assoc_queue(struct buffer_head
*bh
)
467 list_del_init(&bh
->b_assoc_buffers
);
468 WARN_ON(!bh
->b_assoc_map
);
469 if (buffer_write_io_error(bh
))
470 set_bit(AS_EIO
, &bh
->b_assoc_map
->flags
);
471 bh
->b_assoc_map
= NULL
;
474 int inode_has_buffers(struct inode
*inode
)
476 return !list_empty(&inode
->i_data
.private_list
);
480 * osync is designed to support O_SYNC io. It waits synchronously for
481 * all already-submitted IO to complete, but does not queue any new
482 * writes to the disk.
484 * To do O_SYNC writes, just queue the buffer writes with ll_rw_block as
485 * you dirty the buffers, and then use osync_inode_buffers to wait for
486 * completion. Any other dirty buffers which are not yet queued for
487 * write will not be flushed to disk by the osync.
489 static int osync_buffers_list(spinlock_t
*lock
, struct list_head
*list
)
491 struct buffer_head
*bh
;
497 list_for_each_prev(p
, list
) {
499 if (buffer_locked(bh
)) {
503 if (!buffer_uptodate(bh
))
514 static void do_thaw_one(struct super_block
*sb
, void *unused
)
516 char b
[BDEVNAME_SIZE
];
517 while (sb
->s_bdev
&& !thaw_bdev(sb
->s_bdev
, sb
))
518 printk(KERN_WARNING
"Emergency Thaw on %s\n",
519 bdevname(sb
->s_bdev
, b
));
522 static void do_thaw_all(struct work_struct
*work
)
524 iterate_supers(do_thaw_one
, NULL
);
526 printk(KERN_WARNING
"Emergency Thaw complete\n");
530 * emergency_thaw_all -- forcibly thaw every frozen filesystem
532 * Used for emergency unfreeze of all filesystems via SysRq
534 void emergency_thaw_all(void)
536 struct work_struct
*work
;
538 work
= kmalloc(sizeof(*work
), GFP_ATOMIC
);
540 INIT_WORK(work
, do_thaw_all
);
546 * sync_mapping_buffers - write out & wait upon a mapping's "associated" buffers
547 * @mapping: the mapping which wants those buffers written
549 * Starts I/O against the buffers at mapping->private_list, and waits upon
552 * Basically, this is a convenience function for fsync().
553 * @mapping is a file or directory which needs those buffers to be written for
554 * a successful fsync().
556 int sync_mapping_buffers(struct address_space
*mapping
)
558 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
560 if (buffer_mapping
== NULL
|| list_empty(&mapping
->private_list
))
563 return fsync_buffers_list(&buffer_mapping
->private_lock
,
564 &mapping
->private_list
);
566 EXPORT_SYMBOL(sync_mapping_buffers
);
569 * Called when we've recently written block `bblock', and it is known that
570 * `bblock' was for a buffer_boundary() buffer. This means that the block at
571 * `bblock + 1' is probably a dirty indirect block. Hunt it down and, if it's
572 * dirty, schedule it for IO. So that indirects merge nicely with their data.
574 void write_boundary_block(struct block_device
*bdev
,
575 sector_t bblock
, unsigned blocksize
)
577 struct buffer_head
*bh
= __find_get_block(bdev
, bblock
+ 1, blocksize
);
579 if (buffer_dirty(bh
))
580 ll_rw_block(WRITE
, 1, &bh
);
585 void mark_buffer_dirty_inode(struct buffer_head
*bh
, struct inode
*inode
)
587 struct address_space
*mapping
= inode
->i_mapping
;
588 struct address_space
*buffer_mapping
= bh
->b_page
->mapping
;
590 mark_buffer_dirty(bh
);
591 if (!mapping
->assoc_mapping
) {
592 mapping
->assoc_mapping
= buffer_mapping
;
594 BUG_ON(mapping
->assoc_mapping
!= buffer_mapping
);
596 if (!bh
->b_assoc_map
) {
597 spin_lock(&buffer_mapping
->private_lock
);
598 list_move_tail(&bh
->b_assoc_buffers
,
599 &mapping
->private_list
);
600 bh
->b_assoc_map
= mapping
;
601 spin_unlock(&buffer_mapping
->private_lock
);
604 EXPORT_SYMBOL(mark_buffer_dirty_inode
);
607 * Mark the page dirty, and set it dirty in the radix tree, and mark the inode
610 * If warn is true, then emit a warning if the page is not uptodate and has
611 * not been truncated.
613 static void __set_page_dirty(struct page
*page
,
614 struct address_space
*mapping
, int warn
)
616 spin_lock_irq(&mapping
->tree_lock
);
617 if (page
->mapping
) { /* Race with truncate? */
618 WARN_ON_ONCE(warn
&& !PageUptodate(page
));
619 account_page_dirtied(page
, mapping
);
620 radix_tree_tag_set(&mapping
->page_tree
,
621 page_index(page
), PAGECACHE_TAG_DIRTY
);
623 spin_unlock_irq(&mapping
->tree_lock
);
624 __mark_inode_dirty(mapping
->host
, I_DIRTY_PAGES
);
628 * Add a page to the dirty page list.
630 * It is a sad fact of life that this function is called from several places
631 * deeply under spinlocking. It may not sleep.
633 * If the page has buffers, the uptodate buffers are set dirty, to preserve
634 * dirty-state coherency between the page and the buffers. It the page does
635 * not have buffers then when they are later attached they will all be set
638 * The buffers are dirtied before the page is dirtied. There's a small race
639 * window in which a writepage caller may see the page cleanness but not the
640 * buffer dirtiness. That's fine. If this code were to set the page dirty
641 * before the buffers, a concurrent writepage caller could clear the page dirty
642 * bit, see a bunch of clean buffers and we'd end up with dirty buffers/clean
643 * page on the dirty page list.
645 * We use private_lock to lock against try_to_free_buffers while using the
646 * page's buffer list. Also use this to protect against clean buffers being
647 * added to the page after it was set dirty.
649 * FIXME: may need to call ->reservepage here as well. That's rather up to the
650 * address_space though.
652 int __set_page_dirty_buffers(struct page
*page
)
655 struct address_space
*mapping
= page_mapping(page
);
657 if (unlikely(!mapping
))
658 return !TestSetPageDirty(page
);
660 spin_lock(&mapping
->private_lock
);
661 if (page_has_buffers(page
)) {
662 struct buffer_head
*head
= page_buffers(page
);
663 struct buffer_head
*bh
= head
;
666 set_buffer_dirty(bh
);
667 bh
= bh
->b_this_page
;
668 } while (bh
!= head
);
670 newly_dirty
= !TestSetPageDirty(page
);
671 spin_unlock(&mapping
->private_lock
);
674 __set_page_dirty(page
, mapping
, 1);
677 EXPORT_SYMBOL(__set_page_dirty_buffers
);
680 * Write out and wait upon a list of buffers.
682 * We have conflicting pressures: we want to make sure that all
683 * initially dirty buffers get waited on, but that any subsequently
684 * dirtied buffers don't. After all, we don't want fsync to last
685 * forever if somebody is actively writing to the file.
687 * Do this in two main stages: first we copy dirty buffers to a
688 * temporary inode list, queueing the writes as we go. Then we clean
689 * up, waiting for those writes to complete.
691 * During this second stage, any subsequent updates to the file may end
692 * up refiling the buffer on the original inode's dirty list again, so
693 * there is a chance we will end up with a buffer queued for write but
694 * not yet completed on that list. So, as a final cleanup we go through
695 * the osync code to catch these locked, dirty buffers without requeuing
696 * any newly dirty buffers for write.
698 static int fsync_buffers_list(spinlock_t
*lock
, struct list_head
*list
)
700 struct buffer_head
*bh
;
701 struct list_head tmp
;
702 struct address_space
*mapping
;
704 struct blk_plug plug
;
706 INIT_LIST_HEAD(&tmp
);
707 blk_start_plug(&plug
);
710 while (!list_empty(list
)) {
711 bh
= BH_ENTRY(list
->next
);
712 mapping
= bh
->b_assoc_map
;
713 __remove_assoc_queue(bh
);
714 /* Avoid race with mark_buffer_dirty_inode() which does
715 * a lockless check and we rely on seeing the dirty bit */
717 if (buffer_dirty(bh
) || buffer_locked(bh
)) {
718 list_add(&bh
->b_assoc_buffers
, &tmp
);
719 bh
->b_assoc_map
= mapping
;
720 if (buffer_dirty(bh
)) {
724 * Ensure any pending I/O completes so that
725 * write_dirty_buffer() actually writes the
726 * current contents - it is a noop if I/O is
727 * still in flight on potentially older
730 write_dirty_buffer(bh
, WRITE_SYNC
);
733 * Kick off IO for the previous mapping. Note
734 * that we will not run the very last mapping,
735 * wait_on_buffer() will do that for us
736 * through sync_buffer().
745 blk_finish_plug(&plug
);
748 while (!list_empty(&tmp
)) {
749 bh
= BH_ENTRY(tmp
.prev
);
751 mapping
= bh
->b_assoc_map
;
752 __remove_assoc_queue(bh
);
753 /* Avoid race with mark_buffer_dirty_inode() which does
754 * a lockless check and we rely on seeing the dirty bit */
756 if (buffer_dirty(bh
)) {
757 list_add(&bh
->b_assoc_buffers
,
758 &mapping
->private_list
);
759 bh
->b_assoc_map
= mapping
;
763 if (!buffer_uptodate(bh
))
770 err2
= osync_buffers_list(lock
, list
);
778 * Invalidate any and all dirty buffers on a given inode. We are
779 * probably unmounting the fs, but that doesn't mean we have already
780 * done a sync(). Just drop the buffers from the inode list.
782 * NOTE: we take the inode's blockdev's mapping's private_lock. Which
783 * assumes that all the buffers are against the blockdev. Not true
786 void invalidate_inode_buffers(struct inode
*inode
)
788 if (inode_has_buffers(inode
)) {
789 struct address_space
*mapping
= &inode
->i_data
;
790 struct list_head
*list
= &mapping
->private_list
;
791 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
793 spin_lock(&buffer_mapping
->private_lock
);
794 while (!list_empty(list
))
795 __remove_assoc_queue(BH_ENTRY(list
->next
));
796 spin_unlock(&buffer_mapping
->private_lock
);
799 EXPORT_SYMBOL(invalidate_inode_buffers
);
802 * Remove any clean buffers from the inode's buffer list. This is called
803 * when we're trying to free the inode itself. Those buffers can pin it.
805 * Returns true if all buffers were removed.
807 int remove_inode_buffers(struct inode
*inode
)
811 if (inode_has_buffers(inode
)) {
812 struct address_space
*mapping
= &inode
->i_data
;
813 struct list_head
*list
= &mapping
->private_list
;
814 struct address_space
*buffer_mapping
= mapping
->assoc_mapping
;
816 spin_lock(&buffer_mapping
->private_lock
);
817 while (!list_empty(list
)) {
818 struct buffer_head
*bh
= BH_ENTRY(list
->next
);
819 if (buffer_dirty(bh
)) {
823 __remove_assoc_queue(bh
);
825 spin_unlock(&buffer_mapping
->private_lock
);
831 * Create the appropriate buffers when given a page for data area and
832 * the size of each buffer.. Use the bh->b_this_page linked list to
833 * follow the buffers created. Return NULL if unable to create more
836 * The retry flag is used to differentiate async IO (paging, swapping)
837 * which may not fail from ordinary buffer allocations.
839 struct buffer_head
*alloc_page_buffers(struct page
*page
, unsigned long size
,
842 struct buffer_head
*bh
, *head
;
848 while ((offset
-= size
) >= 0) {
849 bh
= alloc_buffer_head(GFP_NOFS
);
854 bh
->b_this_page
= head
;
859 atomic_set(&bh
->b_count
, 0);
862 /* Link the buffer to its page */
863 set_bh_page(bh
, page
, offset
);
865 init_buffer(bh
, NULL
, NULL
);
869 * In case anything failed, we just free everything we got.
875 head
= head
->b_this_page
;
876 free_buffer_head(bh
);
881 * Return failure for non-async IO requests. Async IO requests
882 * are not allowed to fail, so we have to wait until buffer heads
883 * become available. But we don't want tasks sleeping with
884 * partially complete buffers, so all were released above.
889 /* We're _really_ low on memory. Now we just
890 * wait for old buffer heads to become free due to
891 * finishing IO. Since this is an async request and
892 * the reserve list is empty, we're sure there are
893 * async buffer heads in use.
898 EXPORT_SYMBOL_GPL(alloc_page_buffers
);
901 link_dev_buffers(struct page
*page
, struct buffer_head
*head
)
903 struct buffer_head
*bh
, *tail
;
908 bh
= bh
->b_this_page
;
910 tail
->b_this_page
= head
;
911 attach_page_buffers(page
, head
);
915 * Initialise the state of a blockdev page's buffers.
918 init_page_buffers(struct page
*page
, struct block_device
*bdev
,
919 sector_t block
, int size
)
921 struct buffer_head
*head
= page_buffers(page
);
922 struct buffer_head
*bh
= head
;
923 int uptodate
= PageUptodate(page
);
926 if (!buffer_mapped(bh
)) {
927 init_buffer(bh
, NULL
, NULL
);
929 bh
->b_blocknr
= block
;
931 set_buffer_uptodate(bh
);
932 set_buffer_mapped(bh
);
935 bh
= bh
->b_this_page
;
936 } while (bh
!= head
);
940 * Create the page-cache page that contains the requested block.
942 * This is user purely for blockdev mappings.
945 grow_dev_page(struct block_device
*bdev
, sector_t block
,
946 pgoff_t index
, int size
)
948 struct inode
*inode
= bdev
->bd_inode
;
950 struct buffer_head
*bh
;
952 page
= find_or_create_page(inode
->i_mapping
, index
,
953 (mapping_gfp_mask(inode
->i_mapping
) & ~__GFP_FS
)|__GFP_MOVABLE
);
957 BUG_ON(!PageLocked(page
));
959 if (page_has_buffers(page
)) {
960 bh
= page_buffers(page
);
961 if (bh
->b_size
== size
) {
962 init_page_buffers(page
, bdev
, block
, size
);
965 if (!try_to_free_buffers(page
))
970 * Allocate some buffers for this page
972 bh
= alloc_page_buffers(page
, size
, 0);
977 * Link the page to the buffers and initialise them. Take the
978 * lock to be atomic wrt __find_get_block(), which does not
979 * run under the page lock.
981 spin_lock(&inode
->i_mapping
->private_lock
);
982 link_dev_buffers(page
, bh
);
983 init_page_buffers(page
, bdev
, block
, size
);
984 spin_unlock(&inode
->i_mapping
->private_lock
);
990 page_cache_release(page
);
995 * Create buffers for the specified block device block's page. If
996 * that page was dirty, the buffers are set dirty also.
999 grow_buffers(struct block_device
*bdev
, sector_t block
, int size
)
1008 } while ((size
<< sizebits
) < PAGE_SIZE
);
1010 index
= block
>> sizebits
;
1013 * Check for a block which wants to lie outside our maximum possible
1014 * pagecache index. (this comparison is done using sector_t types).
1016 if (unlikely(index
!= block
>> sizebits
)) {
1017 char b
[BDEVNAME_SIZE
];
1019 printk(KERN_ERR
"%s: requested out-of-range block %llu for "
1021 __func__
, (unsigned long long)block
,
1025 block
= index
<< sizebits
;
1026 /* Create a page with the proper size buffers.. */
1027 page
= grow_dev_page(bdev
, block
, index
, size
);
1031 page_cache_release(page
);
1035 static struct buffer_head
*
1036 __getblk_slow(struct block_device
*bdev
, sector_t block
, int size
)
1038 /* Size must be multiple of hard sectorsize */
1039 if (unlikely(size
& (bdev_logical_block_size(bdev
)-1) ||
1040 (size
< 512 || size
> PAGE_SIZE
))) {
1041 printk(KERN_ERR
"getblk(): invalid block size %d requested\n",
1043 printk(KERN_ERR
"logical block size: %d\n",
1044 bdev_logical_block_size(bdev
));
1051 struct buffer_head
* bh
;
1054 bh
= __find_get_block(bdev
, block
, size
);
1058 ret
= grow_buffers(bdev
, block
, size
);
1067 * The relationship between dirty buffers and dirty pages:
1069 * Whenever a page has any dirty buffers, the page's dirty bit is set, and
1070 * the page is tagged dirty in its radix tree.
1072 * At all times, the dirtiness of the buffers represents the dirtiness of
1073 * subsections of the page. If the page has buffers, the page dirty bit is
1074 * merely a hint about the true dirty state.
1076 * When a page is set dirty in its entirety, all its buffers are marked dirty
1077 * (if the page has buffers).
1079 * When a buffer is marked dirty, its page is dirtied, but the page's other
1082 * Also. When blockdev buffers are explicitly read with bread(), they
1083 * individually become uptodate. But their backing page remains not
1084 * uptodate - even if all of its buffers are uptodate. A subsequent
1085 * block_read_full_page() against that page will discover all the uptodate
1086 * buffers, will set the page uptodate and will perform no I/O.
1090 * mark_buffer_dirty - mark a buffer_head as needing writeout
1091 * @bh: the buffer_head to mark dirty
1093 * mark_buffer_dirty() will set the dirty bit against the buffer, then set its
1094 * backing page dirty, then tag the page as dirty in its address_space's radix
1095 * tree and then attach the address_space's inode to its superblock's dirty
1098 * mark_buffer_dirty() is atomic. It takes bh->b_page->mapping->private_lock,
1099 * mapping->tree_lock and mapping->host->i_lock.
1101 void mark_buffer_dirty(struct buffer_head
*bh
)
1103 WARN_ON_ONCE(!buffer_uptodate(bh
));
1106 * Very *carefully* optimize the it-is-already-dirty case.
1108 * Don't let the final "is it dirty" escape to before we
1109 * perhaps modified the buffer.
1111 if (buffer_dirty(bh
)) {
1113 if (buffer_dirty(bh
))
1117 if (!test_set_buffer_dirty(bh
)) {
1118 struct page
*page
= bh
->b_page
;
1119 if (!TestSetPageDirty(page
)) {
1120 struct address_space
*mapping
= page_mapping(page
);
1122 __set_page_dirty(page
, mapping
, 0);
1126 EXPORT_SYMBOL(mark_buffer_dirty
);
1129 * Decrement a buffer_head's reference count. If all buffers against a page
1130 * have zero reference count, are clean and unlocked, and if the page is clean
1131 * and unlocked then try_to_free_buffers() may strip the buffers from the page
1132 * in preparation for freeing it (sometimes, rarely, buffers are removed from
1133 * a page but it ends up not being freed, and buffers may later be reattached).
1135 void __brelse(struct buffer_head
* buf
)
1137 if (atomic_read(&buf
->b_count
)) {
1141 WARN(1, KERN_ERR
"VFS: brelse: Trying to free free buffer\n");
1143 EXPORT_SYMBOL(__brelse
);
1146 * bforget() is like brelse(), except it discards any
1147 * potentially dirty data.
1149 void __bforget(struct buffer_head
*bh
)
1151 clear_buffer_dirty(bh
);
1152 if (bh
->b_assoc_map
) {
1153 struct address_space
*buffer_mapping
= bh
->b_page
->mapping
;
1155 spin_lock(&buffer_mapping
->private_lock
);
1156 list_del_init(&bh
->b_assoc_buffers
);
1157 bh
->b_assoc_map
= NULL
;
1158 spin_unlock(&buffer_mapping
->private_lock
);
1162 EXPORT_SYMBOL(__bforget
);
1164 static struct buffer_head
*__bread_slow(struct buffer_head
*bh
)
1167 if (buffer_uptodate(bh
)) {
1172 bh
->b_end_io
= end_buffer_read_sync
;
1173 submit_bh(READ
, bh
);
1175 if (buffer_uptodate(bh
))
1183 * Per-cpu buffer LRU implementation. To reduce the cost of __find_get_block().
1184 * The bhs[] array is sorted - newest buffer is at bhs[0]. Buffers have their
1185 * refcount elevated by one when they're in an LRU. A buffer can only appear
1186 * once in a particular CPU's LRU. A single buffer can be present in multiple
1187 * CPU's LRUs at the same time.
1189 * This is a transparent caching front-end to sb_bread(), sb_getblk() and
1190 * sb_find_get_block().
1192 * The LRUs themselves only need locking against invalidate_bh_lrus. We use
1193 * a local interrupt disable for that.
1196 #define BH_LRU_SIZE 8
1199 struct buffer_head
*bhs
[BH_LRU_SIZE
];
1202 static DEFINE_PER_CPU(struct bh_lru
, bh_lrus
) = {{ NULL
}};
1205 #define bh_lru_lock() local_irq_disable()
1206 #define bh_lru_unlock() local_irq_enable()
1208 #define bh_lru_lock() preempt_disable()
1209 #define bh_lru_unlock() preempt_enable()
1212 static inline void check_irqs_on(void)
1214 #ifdef irqs_disabled
1215 BUG_ON(irqs_disabled());
1220 * The LRU management algorithm is dopey-but-simple. Sorry.
1222 static void bh_lru_install(struct buffer_head
*bh
)
1224 struct buffer_head
*evictee
= NULL
;
1228 if (__this_cpu_read(bh_lrus
.bhs
[0]) != bh
) {
1229 struct buffer_head
*bhs
[BH_LRU_SIZE
];
1235 for (in
= 0; in
< BH_LRU_SIZE
; in
++) {
1236 struct buffer_head
*bh2
=
1237 __this_cpu_read(bh_lrus
.bhs
[in
]);
1242 if (out
>= BH_LRU_SIZE
) {
1243 BUG_ON(evictee
!= NULL
);
1250 while (out
< BH_LRU_SIZE
)
1252 memcpy(__this_cpu_ptr(&bh_lrus
.bhs
), bhs
, sizeof(bhs
));
1261 * Look up the bh in this cpu's LRU. If it's there, move it to the head.
1263 static struct buffer_head
*
1264 lookup_bh_lru(struct block_device
*bdev
, sector_t block
, unsigned size
)
1266 struct buffer_head
*ret
= NULL
;
1271 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
1272 struct buffer_head
*bh
= __this_cpu_read(bh_lrus
.bhs
[i
]);
1274 if (bh
&& bh
->b_bdev
== bdev
&&
1275 bh
->b_blocknr
== block
&& bh
->b_size
== size
) {
1278 __this_cpu_write(bh_lrus
.bhs
[i
],
1279 __this_cpu_read(bh_lrus
.bhs
[i
- 1]));
1282 __this_cpu_write(bh_lrus
.bhs
[0], bh
);
1294 * Perform a pagecache lookup for the matching buffer. If it's there, refresh
1295 * it in the LRU and mark it as accessed. If it is not present then return
1298 struct buffer_head
*
1299 __find_get_block(struct block_device
*bdev
, sector_t block
, unsigned size
)
1301 struct buffer_head
*bh
= lookup_bh_lru(bdev
, block
, size
);
1304 bh
= __find_get_block_slow(bdev
, block
);
1312 EXPORT_SYMBOL(__find_get_block
);
1315 * __getblk will locate (and, if necessary, create) the buffer_head
1316 * which corresponds to the passed block_device, block and size. The
1317 * returned buffer has its reference count incremented.
1319 * __getblk() cannot fail - it just keeps trying. If you pass it an
1320 * illegal block number, __getblk() will happily return a buffer_head
1321 * which represents the non-existent block. Very weird.
1323 * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers()
1324 * attempt is failing. FIXME, perhaps?
1326 struct buffer_head
*
1327 __getblk(struct block_device
*bdev
, sector_t block
, unsigned size
)
1329 struct buffer_head
*bh
= __find_get_block(bdev
, block
, size
);
1333 bh
= __getblk_slow(bdev
, block
, size
);
1336 EXPORT_SYMBOL(__getblk
);
1339 * Do async read-ahead on a buffer..
1341 void __breadahead(struct block_device
*bdev
, sector_t block
, unsigned size
)
1343 struct buffer_head
*bh
= __getblk(bdev
, block
, size
);
1345 ll_rw_block(READA
, 1, &bh
);
1349 EXPORT_SYMBOL(__breadahead
);
1352 * __bread() - reads a specified block and returns the bh
1353 * @bdev: the block_device to read from
1354 * @block: number of block
1355 * @size: size (in bytes) to read
1357 * Reads a specified block, and returns buffer head that contains it.
1358 * It returns NULL if the block was unreadable.
1360 struct buffer_head
*
1361 __bread(struct block_device
*bdev
, sector_t block
, unsigned size
)
1363 struct buffer_head
*bh
= __getblk(bdev
, block
, size
);
1365 if (likely(bh
) && !buffer_uptodate(bh
))
1366 bh
= __bread_slow(bh
);
1369 EXPORT_SYMBOL(__bread
);
1372 * invalidate_bh_lrus() is called rarely - but not only at unmount.
1373 * This doesn't race because it runs in each cpu either in irq
1374 * or with preempt disabled.
1376 static void invalidate_bh_lru(void *arg
)
1378 struct bh_lru
*b
= &get_cpu_var(bh_lrus
);
1381 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
1385 put_cpu_var(bh_lrus
);
1388 static bool has_bh_in_lru(int cpu
, void *dummy
)
1390 struct bh_lru
*b
= per_cpu_ptr(&bh_lrus
, cpu
);
1393 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
1401 void invalidate_bh_lrus(void)
1403 on_each_cpu_cond(has_bh_in_lru
, invalidate_bh_lru
, NULL
, 1, GFP_KERNEL
);
1405 EXPORT_SYMBOL_GPL(invalidate_bh_lrus
);
1407 void set_bh_page(struct buffer_head
*bh
,
1408 struct page
*page
, unsigned long offset
)
1411 BUG_ON(offset
>= PAGE_SIZE
);
1412 if (PageHighMem(page
))
1414 * This catches illegal uses and preserves the offset:
1416 bh
->b_data
= (char *)(0 + offset
);
1418 bh
->b_data
= page_address(page
) + offset
;
1420 EXPORT_SYMBOL(set_bh_page
);
1423 * Called when truncating a buffer on a page completely.
1425 static void discard_buffer(struct buffer_head
* bh
)
1428 clear_buffer_dirty(bh
);
1430 clear_buffer_mapped(bh
);
1431 clear_buffer_req(bh
);
1432 clear_buffer_new(bh
);
1433 clear_buffer_delay(bh
);
1434 clear_buffer_unwritten(bh
);
1439 * block_invalidatepage - invalidate part or all of a buffer-backed page
1441 * @page: the page which is affected
1442 * @offset: the index of the truncation point
1444 * block_invalidatepage() is called when all or part of the page has become
1445 * invalidated by a truncate operation.
1447 * block_invalidatepage() does not have to release all buffers, but it must
1448 * ensure that no dirty buffer is left outside @offset and that no I/O
1449 * is underway against any of the blocks which are outside the truncation
1450 * point. Because the caller is about to free (and possibly reuse) those
1453 void block_invalidatepage(struct page
*page
, unsigned long offset
)
1455 struct buffer_head
*head
, *bh
, *next
;
1456 unsigned int curr_off
= 0;
1458 BUG_ON(!PageLocked(page
));
1459 if (!page_has_buffers(page
))
1462 head
= page_buffers(page
);
1465 unsigned int next_off
= curr_off
+ bh
->b_size
;
1466 next
= bh
->b_this_page
;
1469 * is this block fully invalidated?
1471 if (offset
<= curr_off
)
1473 curr_off
= next_off
;
1475 } while (bh
!= head
);
1478 * We release buffers only if the entire page is being invalidated.
1479 * The get_block cached value has been unconditionally invalidated,
1480 * so real IO is not possible anymore.
1483 try_to_release_page(page
, 0);
1487 EXPORT_SYMBOL(block_invalidatepage
);
1490 * We attach and possibly dirty the buffers atomically wrt
1491 * __set_page_dirty_buffers() via private_lock. try_to_free_buffers
1492 * is already excluded via the page lock.
1494 void create_empty_buffers(struct page
*page
,
1495 unsigned long blocksize
, unsigned long b_state
)
1497 struct buffer_head
*bh
, *head
, *tail
;
1499 head
= alloc_page_buffers(page
, blocksize
, 1);
1502 bh
->b_state
|= b_state
;
1504 bh
= bh
->b_this_page
;
1506 tail
->b_this_page
= head
;
1508 spin_lock(&page
->mapping
->private_lock
);
1509 if (PageUptodate(page
) || PageDirty(page
)) {
1512 if (PageDirty(page
))
1513 set_buffer_dirty(bh
);
1514 if (PageUptodate(page
))
1515 set_buffer_uptodate(bh
);
1516 bh
= bh
->b_this_page
;
1517 } while (bh
!= head
);
1519 attach_page_buffers(page
, head
);
1520 spin_unlock(&page
->mapping
->private_lock
);
1522 EXPORT_SYMBOL(create_empty_buffers
);
1525 * We are taking a block for data and we don't want any output from any
1526 * buffer-cache aliases starting from return from that function and
1527 * until the moment when something will explicitly mark the buffer
1528 * dirty (hopefully that will not happen until we will free that block ;-)
1529 * We don't even need to mark it not-uptodate - nobody can expect
1530 * anything from a newly allocated buffer anyway. We used to used
1531 * unmap_buffer() for such invalidation, but that was wrong. We definitely
1532 * don't want to mark the alias unmapped, for example - it would confuse
1533 * anyone who might pick it with bread() afterwards...
1535 * Also.. Note that bforget() doesn't lock the buffer. So there can
1536 * be writeout I/O going on against recently-freed buffers. We don't
1537 * wait on that I/O in bforget() - it's more efficient to wait on the I/O
1538 * only if we really need to. That happens here.
1540 void unmap_underlying_metadata(struct block_device
*bdev
, sector_t block
)
1542 struct buffer_head
*old_bh
;
1546 old_bh
= __find_get_block_slow(bdev
, block
);
1548 clear_buffer_dirty(old_bh
);
1549 wait_on_buffer(old_bh
);
1550 clear_buffer_req(old_bh
);
1554 EXPORT_SYMBOL(unmap_underlying_metadata
);
1557 * NOTE! All mapped/uptodate combinations are valid:
1559 * Mapped Uptodate Meaning
1561 * No No "unknown" - must do get_block()
1562 * No Yes "hole" - zero-filled
1563 * Yes No "allocated" - allocated on disk, not read in
1564 * Yes Yes "valid" - allocated and up-to-date in memory.
1566 * "Dirty" is valid only with the last case (mapped+uptodate).
1570 * While block_write_full_page is writing back the dirty buffers under
1571 * the page lock, whoever dirtied the buffers may decide to clean them
1572 * again at any time. We handle that by only looking at the buffer
1573 * state inside lock_buffer().
1575 * If block_write_full_page() is called for regular writeback
1576 * (wbc->sync_mode == WB_SYNC_NONE) then it will redirty a page which has a
1577 * locked buffer. This only can happen if someone has written the buffer
1578 * directly, with submit_bh(). At the address_space level PageWriteback
1579 * prevents this contention from occurring.
1581 * If block_write_full_page() is called with wbc->sync_mode ==
1582 * WB_SYNC_ALL, the writes are posted using WRITE_SYNC; this
1583 * causes the writes to be flagged as synchronous writes.
1585 static int __block_write_full_page(struct inode
*inode
, struct page
*page
,
1586 get_block_t
*get_block
, struct writeback_control
*wbc
,
1587 bh_end_io_t
*handler
)
1591 sector_t last_block
;
1592 struct buffer_head
*bh
, *head
;
1593 const unsigned blocksize
= 1 << inode
->i_blkbits
;
1594 int nr_underway
= 0;
1595 int write_op
= (wbc
->sync_mode
== WB_SYNC_ALL
?
1596 WRITE_SYNC
: WRITE
);
1598 BUG_ON(!PageLocked(page
));
1600 last_block
= (i_size_read(inode
) - 1) >> inode
->i_blkbits
;
1602 if (!page_has_buffers(page
)) {
1603 create_empty_buffers(page
, blocksize
,
1604 (1 << BH_Dirty
)|(1 << BH_Uptodate
));
1608 * Be very careful. We have no exclusion from __set_page_dirty_buffers
1609 * here, and the (potentially unmapped) buffers may become dirty at
1610 * any time. If a buffer becomes dirty here after we've inspected it
1611 * then we just miss that fact, and the page stays dirty.
1613 * Buffers outside i_size may be dirtied by __set_page_dirty_buffers;
1614 * handle that here by just cleaning them.
1617 block
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
1618 head
= page_buffers(page
);
1622 * Get all the dirty buffers mapped to disk addresses and
1623 * handle any aliases from the underlying blockdev's mapping.
1626 if (block
> last_block
) {
1628 * mapped buffers outside i_size will occur, because
1629 * this page can be outside i_size when there is a
1630 * truncate in progress.
1633 * The buffer was zeroed by block_write_full_page()
1635 clear_buffer_dirty(bh
);
1636 set_buffer_uptodate(bh
);
1637 } else if ((!buffer_mapped(bh
) || buffer_delay(bh
)) &&
1639 WARN_ON(bh
->b_size
!= blocksize
);
1640 err
= get_block(inode
, block
, bh
, 1);
1643 clear_buffer_delay(bh
);
1644 if (buffer_new(bh
)) {
1645 /* blockdev mappings never come here */
1646 clear_buffer_new(bh
);
1647 unmap_underlying_metadata(bh
->b_bdev
,
1651 bh
= bh
->b_this_page
;
1653 } while (bh
!= head
);
1656 if (!buffer_mapped(bh
))
1659 * If it's a fully non-blocking write attempt and we cannot
1660 * lock the buffer then redirty the page. Note that this can
1661 * potentially cause a busy-wait loop from writeback threads
1662 * and kswapd activity, but those code paths have their own
1663 * higher-level throttling.
1665 if (wbc
->sync_mode
!= WB_SYNC_NONE
) {
1667 } else if (!trylock_buffer(bh
)) {
1668 redirty_page_for_writepage(wbc
, page
);
1671 if (test_clear_buffer_dirty(bh
)) {
1672 mark_buffer_async_write_endio(bh
, handler
);
1676 } while ((bh
= bh
->b_this_page
) != head
);
1679 * The page and its buffers are protected by PageWriteback(), so we can
1680 * drop the bh refcounts early.
1682 BUG_ON(PageWriteback(page
));
1683 set_page_writeback(page
);
1686 struct buffer_head
*next
= bh
->b_this_page
;
1687 if (buffer_async_write(bh
)) {
1688 submit_bh(write_op
, bh
);
1692 } while (bh
!= head
);
1697 if (nr_underway
== 0) {
1699 * The page was marked dirty, but the buffers were
1700 * clean. Someone wrote them back by hand with
1701 * ll_rw_block/submit_bh. A rare case.
1703 end_page_writeback(page
);
1706 * The page and buffer_heads can be released at any time from
1714 * ENOSPC, or some other error. We may already have added some
1715 * blocks to the file, so we need to write these out to avoid
1716 * exposing stale data.
1717 * The page is currently locked and not marked for writeback
1720 /* Recovery: lock and submit the mapped buffers */
1722 if (buffer_mapped(bh
) && buffer_dirty(bh
) &&
1723 !buffer_delay(bh
)) {
1725 mark_buffer_async_write_endio(bh
, handler
);
1728 * The buffer may have been set dirty during
1729 * attachment to a dirty page.
1731 clear_buffer_dirty(bh
);
1733 } while ((bh
= bh
->b_this_page
) != head
);
1735 BUG_ON(PageWriteback(page
));
1736 mapping_set_error(page
->mapping
, err
);
1737 set_page_writeback(page
);
1739 struct buffer_head
*next
= bh
->b_this_page
;
1740 if (buffer_async_write(bh
)) {
1741 clear_buffer_dirty(bh
);
1742 submit_bh(write_op
, bh
);
1746 } while (bh
!= head
);
1752 * If a page has any new buffers, zero them out here, and mark them uptodate
1753 * and dirty so they'll be written out (in order to prevent uninitialised
1754 * block data from leaking). And clear the new bit.
1756 void page_zero_new_buffers(struct page
*page
, unsigned from
, unsigned to
)
1758 unsigned int block_start
, block_end
;
1759 struct buffer_head
*head
, *bh
;
1761 BUG_ON(!PageLocked(page
));
1762 if (!page_has_buffers(page
))
1765 bh
= head
= page_buffers(page
);
1768 block_end
= block_start
+ bh
->b_size
;
1770 if (buffer_new(bh
)) {
1771 if (block_end
> from
&& block_start
< to
) {
1772 if (!PageUptodate(page
)) {
1773 unsigned start
, size
;
1775 start
= max(from
, block_start
);
1776 size
= min(to
, block_end
) - start
;
1778 zero_user(page
, start
, size
);
1779 set_buffer_uptodate(bh
);
1782 clear_buffer_new(bh
);
1783 mark_buffer_dirty(bh
);
1787 block_start
= block_end
;
1788 bh
= bh
->b_this_page
;
1789 } while (bh
!= head
);
1791 EXPORT_SYMBOL(page_zero_new_buffers
);
1793 int __block_write_begin(struct page
*page
, loff_t pos
, unsigned len
,
1794 get_block_t
*get_block
)
1796 unsigned from
= pos
& (PAGE_CACHE_SIZE
- 1);
1797 unsigned to
= from
+ len
;
1798 struct inode
*inode
= page
->mapping
->host
;
1799 unsigned block_start
, block_end
;
1802 unsigned blocksize
, bbits
;
1803 struct buffer_head
*bh
, *head
, *wait
[2], **wait_bh
=wait
;
1805 BUG_ON(!PageLocked(page
));
1806 BUG_ON(from
> PAGE_CACHE_SIZE
);
1807 BUG_ON(to
> PAGE_CACHE_SIZE
);
1810 blocksize
= 1 << inode
->i_blkbits
;
1811 if (!page_has_buffers(page
))
1812 create_empty_buffers(page
, blocksize
, 0);
1813 head
= page_buffers(page
);
1815 bbits
= inode
->i_blkbits
;
1816 block
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- bbits
);
1818 for(bh
= head
, block_start
= 0; bh
!= head
|| !block_start
;
1819 block
++, block_start
=block_end
, bh
= bh
->b_this_page
) {
1820 block_end
= block_start
+ blocksize
;
1821 if (block_end
<= from
|| block_start
>= to
) {
1822 if (PageUptodate(page
)) {
1823 if (!buffer_uptodate(bh
))
1824 set_buffer_uptodate(bh
);
1829 clear_buffer_new(bh
);
1830 if (!buffer_mapped(bh
)) {
1831 WARN_ON(bh
->b_size
!= blocksize
);
1832 err
= get_block(inode
, block
, bh
, 1);
1835 if (buffer_new(bh
)) {
1836 unmap_underlying_metadata(bh
->b_bdev
,
1838 if (PageUptodate(page
)) {
1839 clear_buffer_new(bh
);
1840 set_buffer_uptodate(bh
);
1841 mark_buffer_dirty(bh
);
1844 if (block_end
> to
|| block_start
< from
)
1845 zero_user_segments(page
,
1851 if (PageUptodate(page
)) {
1852 if (!buffer_uptodate(bh
))
1853 set_buffer_uptodate(bh
);
1856 if (!buffer_uptodate(bh
) && !buffer_delay(bh
) &&
1857 !buffer_unwritten(bh
) &&
1858 (block_start
< from
|| block_end
> to
)) {
1859 ll_rw_block(READ
, 1, &bh
);
1864 * If we issued read requests - let them complete.
1866 while(wait_bh
> wait
) {
1867 wait_on_buffer(*--wait_bh
);
1868 if (!buffer_uptodate(*wait_bh
))
1872 page_zero_new_buffers(page
, from
, to
);
1875 EXPORT_SYMBOL(__block_write_begin
);
1877 static int __block_commit_write(struct inode
*inode
, struct page
*page
,
1878 unsigned from
, unsigned to
)
1880 unsigned block_start
, block_end
;
1883 struct buffer_head
*bh
, *head
;
1885 blocksize
= 1 << inode
->i_blkbits
;
1887 for(bh
= head
= page_buffers(page
), block_start
= 0;
1888 bh
!= head
|| !block_start
;
1889 block_start
=block_end
, bh
= bh
->b_this_page
) {
1890 block_end
= block_start
+ blocksize
;
1891 if (block_end
<= from
|| block_start
>= to
) {
1892 if (!buffer_uptodate(bh
))
1895 set_buffer_uptodate(bh
);
1896 mark_buffer_dirty(bh
);
1898 clear_buffer_new(bh
);
1902 * If this is a partial write which happened to make all buffers
1903 * uptodate then we can optimize away a bogus readpage() for
1904 * the next read(). Here we 'discover' whether the page went
1905 * uptodate as a result of this (potentially partial) write.
1908 SetPageUptodate(page
);
1913 * block_write_begin takes care of the basic task of block allocation and
1914 * bringing partial write blocks uptodate first.
1916 * The filesystem needs to handle block truncation upon failure.
1918 int block_write_begin(struct address_space
*mapping
, loff_t pos
, unsigned len
,
1919 unsigned flags
, struct page
**pagep
, get_block_t
*get_block
)
1921 pgoff_t index
= pos
>> PAGE_CACHE_SHIFT
;
1925 page
= grab_cache_page_write_begin(mapping
, index
, flags
);
1929 status
= __block_write_begin(page
, pos
, len
, get_block
);
1930 if (unlikely(status
)) {
1932 page_cache_release(page
);
1939 EXPORT_SYMBOL(block_write_begin
);
1941 int block_write_end(struct file
*file
, struct address_space
*mapping
,
1942 loff_t pos
, unsigned len
, unsigned copied
,
1943 struct page
*page
, void *fsdata
)
1945 struct inode
*inode
= mapping
->host
;
1948 start
= pos
& (PAGE_CACHE_SIZE
- 1);
1950 if (unlikely(copied
< len
)) {
1952 * The buffers that were written will now be uptodate, so we
1953 * don't have to worry about a readpage reading them and
1954 * overwriting a partial write. However if we have encountered
1955 * a short write and only partially written into a buffer, it
1956 * will not be marked uptodate, so a readpage might come in and
1957 * destroy our partial write.
1959 * Do the simplest thing, and just treat any short write to a
1960 * non uptodate page as a zero-length write, and force the
1961 * caller to redo the whole thing.
1963 if (!PageUptodate(page
))
1966 page_zero_new_buffers(page
, start
+copied
, start
+len
);
1968 flush_dcache_page(page
);
1970 /* This could be a short (even 0-length) commit */
1971 __block_commit_write(inode
, page
, start
, start
+copied
);
1975 EXPORT_SYMBOL(block_write_end
);
1977 int generic_write_end(struct file
*file
, struct address_space
*mapping
,
1978 loff_t pos
, unsigned len
, unsigned copied
,
1979 struct page
*page
, void *fsdata
)
1981 struct inode
*inode
= mapping
->host
;
1982 int i_size_changed
= 0;
1984 copied
= block_write_end(file
, mapping
, pos
, len
, copied
, page
, fsdata
);
1987 * No need to use i_size_read() here, the i_size
1988 * cannot change under us because we hold i_mutex.
1990 * But it's important to update i_size while still holding page lock:
1991 * page writeout could otherwise come in and zero beyond i_size.
1993 if (pos
+copied
> inode
->i_size
) {
1994 i_size_write(inode
, pos
+copied
);
1999 page_cache_release(page
);
2002 * Don't mark the inode dirty under page lock. First, it unnecessarily
2003 * makes the holding time of page lock longer. Second, it forces lock
2004 * ordering of page lock and transaction start for journaling
2008 mark_inode_dirty(inode
);
2012 EXPORT_SYMBOL(generic_write_end
);
2015 * block_is_partially_uptodate checks whether buffers within a page are
2018 * Returns true if all buffers which correspond to a file portion
2019 * we want to read are uptodate.
2021 int block_is_partially_uptodate(struct page
*page
, read_descriptor_t
*desc
,
2024 struct inode
*inode
= page
->mapping
->host
;
2025 unsigned block_start
, block_end
, blocksize
;
2027 struct buffer_head
*bh
, *head
;
2030 if (!page_has_buffers(page
))
2033 blocksize
= 1 << inode
->i_blkbits
;
2034 to
= min_t(unsigned, PAGE_CACHE_SIZE
- from
, desc
->count
);
2036 if (from
< blocksize
&& to
> PAGE_CACHE_SIZE
- blocksize
)
2039 head
= page_buffers(page
);
2043 block_end
= block_start
+ blocksize
;
2044 if (block_end
> from
&& block_start
< to
) {
2045 if (!buffer_uptodate(bh
)) {
2049 if (block_end
>= to
)
2052 block_start
= block_end
;
2053 bh
= bh
->b_this_page
;
2054 } while (bh
!= head
);
2058 EXPORT_SYMBOL(block_is_partially_uptodate
);
2061 * Generic "read page" function for block devices that have the normal
2062 * get_block functionality. This is most of the block device filesystems.
2063 * Reads the page asynchronously --- the unlock_buffer() and
2064 * set/clear_buffer_uptodate() functions propagate buffer state into the
2065 * page struct once IO has completed.
2067 int block_read_full_page(struct page
*page
, get_block_t
*get_block
)
2069 struct inode
*inode
= page
->mapping
->host
;
2070 sector_t iblock
, lblock
;
2071 struct buffer_head
*bh
, *head
, *arr
[MAX_BUF_PER_PAGE
];
2072 unsigned int blocksize
;
2074 int fully_mapped
= 1;
2076 BUG_ON(!PageLocked(page
));
2077 blocksize
= 1 << inode
->i_blkbits
;
2078 if (!page_has_buffers(page
))
2079 create_empty_buffers(page
, blocksize
, 0);
2080 head
= page_buffers(page
);
2082 iblock
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
2083 lblock
= (i_size_read(inode
)+blocksize
-1) >> inode
->i_blkbits
;
2089 if (buffer_uptodate(bh
))
2092 if (!buffer_mapped(bh
)) {
2096 if (iblock
< lblock
) {
2097 WARN_ON(bh
->b_size
!= blocksize
);
2098 err
= get_block(inode
, iblock
, bh
, 0);
2102 if (!buffer_mapped(bh
)) {
2103 zero_user(page
, i
* blocksize
, blocksize
);
2105 set_buffer_uptodate(bh
);
2109 * get_block() might have updated the buffer
2112 if (buffer_uptodate(bh
))
2116 } while (i
++, iblock
++, (bh
= bh
->b_this_page
) != head
);
2119 SetPageMappedToDisk(page
);
2123 * All buffers are uptodate - we can set the page uptodate
2124 * as well. But not if get_block() returned an error.
2126 if (!PageError(page
))
2127 SetPageUptodate(page
);
2132 /* Stage two: lock the buffers */
2133 for (i
= 0; i
< nr
; i
++) {
2136 mark_buffer_async_read(bh
);
2140 * Stage 3: start the IO. Check for uptodateness
2141 * inside the buffer lock in case another process reading
2142 * the underlying blockdev brought it uptodate (the sct fix).
2144 for (i
= 0; i
< nr
; i
++) {
2146 if (buffer_uptodate(bh
))
2147 end_buffer_async_read(bh
, 1);
2149 submit_bh(READ
, bh
);
2153 EXPORT_SYMBOL(block_read_full_page
);
2155 /* utility function for filesystems that need to do work on expanding
2156 * truncates. Uses filesystem pagecache writes to allow the filesystem to
2157 * deal with the hole.
2159 int generic_cont_expand_simple(struct inode
*inode
, loff_t size
)
2161 struct address_space
*mapping
= inode
->i_mapping
;
2166 err
= inode_newsize_ok(inode
, size
);
2170 err
= pagecache_write_begin(NULL
, mapping
, size
, 0,
2171 AOP_FLAG_UNINTERRUPTIBLE
|AOP_FLAG_CONT_EXPAND
,
2176 err
= pagecache_write_end(NULL
, mapping
, size
, 0, 0, page
, fsdata
);
2182 EXPORT_SYMBOL(generic_cont_expand_simple
);
2184 static int cont_expand_zero(struct file
*file
, struct address_space
*mapping
,
2185 loff_t pos
, loff_t
*bytes
)
2187 struct inode
*inode
= mapping
->host
;
2188 unsigned blocksize
= 1 << inode
->i_blkbits
;
2191 pgoff_t index
, curidx
;
2193 unsigned zerofrom
, offset
, len
;
2196 index
= pos
>> PAGE_CACHE_SHIFT
;
2197 offset
= pos
& ~PAGE_CACHE_MASK
;
2199 while (index
> (curidx
= (curpos
= *bytes
)>>PAGE_CACHE_SHIFT
)) {
2200 zerofrom
= curpos
& ~PAGE_CACHE_MASK
;
2201 if (zerofrom
& (blocksize
-1)) {
2202 *bytes
|= (blocksize
-1);
2205 len
= PAGE_CACHE_SIZE
- zerofrom
;
2207 err
= pagecache_write_begin(file
, mapping
, curpos
, len
,
2208 AOP_FLAG_UNINTERRUPTIBLE
,
2212 zero_user(page
, zerofrom
, len
);
2213 err
= pagecache_write_end(file
, mapping
, curpos
, len
, len
,
2220 balance_dirty_pages_ratelimited(mapping
);
2223 /* page covers the boundary, find the boundary offset */
2224 if (index
== curidx
) {
2225 zerofrom
= curpos
& ~PAGE_CACHE_MASK
;
2226 /* if we will expand the thing last block will be filled */
2227 if (offset
<= zerofrom
) {
2230 if (zerofrom
& (blocksize
-1)) {
2231 *bytes
|= (blocksize
-1);
2234 len
= offset
- zerofrom
;
2236 err
= pagecache_write_begin(file
, mapping
, curpos
, len
,
2237 AOP_FLAG_UNINTERRUPTIBLE
,
2241 zero_user(page
, zerofrom
, len
);
2242 err
= pagecache_write_end(file
, mapping
, curpos
, len
, len
,
2254 * For moronic filesystems that do not allow holes in file.
2255 * We may have to extend the file.
2257 int cont_write_begin(struct file
*file
, struct address_space
*mapping
,
2258 loff_t pos
, unsigned len
, unsigned flags
,
2259 struct page
**pagep
, void **fsdata
,
2260 get_block_t
*get_block
, loff_t
*bytes
)
2262 struct inode
*inode
= mapping
->host
;
2263 unsigned blocksize
= 1 << inode
->i_blkbits
;
2267 err
= cont_expand_zero(file
, mapping
, pos
, bytes
);
2271 zerofrom
= *bytes
& ~PAGE_CACHE_MASK
;
2272 if (pos
+len
> *bytes
&& zerofrom
& (blocksize
-1)) {
2273 *bytes
|= (blocksize
-1);
2277 return block_write_begin(mapping
, pos
, len
, flags
, pagep
, get_block
);
2279 EXPORT_SYMBOL(cont_write_begin
);
2281 int block_commit_write(struct page
*page
, unsigned from
, unsigned to
)
2283 struct inode
*inode
= page
->mapping
->host
;
2284 __block_commit_write(inode
,page
,from
,to
);
2287 EXPORT_SYMBOL(block_commit_write
);
2290 * block_page_mkwrite() is not allowed to change the file size as it gets
2291 * called from a page fault handler when a page is first dirtied. Hence we must
2292 * be careful to check for EOF conditions here. We set the page up correctly
2293 * for a written page which means we get ENOSPC checking when writing into
2294 * holes and correct delalloc and unwritten extent mapping on filesystems that
2295 * support these features.
2297 * We are not allowed to take the i_mutex here so we have to play games to
2298 * protect against truncate races as the page could now be beyond EOF. Because
2299 * truncate writes the inode size before removing pages, once we have the
2300 * page lock we can determine safely if the page is beyond EOF. If it is not
2301 * beyond EOF, then the page is guaranteed safe against truncation until we
2304 * Direct callers of this function should call vfs_check_frozen() so that page
2305 * fault does not busyloop until the fs is thawed.
2307 int __block_page_mkwrite(struct vm_area_struct
*vma
, struct vm_fault
*vmf
,
2308 get_block_t get_block
)
2310 struct page
*page
= vmf
->page
;
2311 struct inode
*inode
= vma
->vm_file
->f_path
.dentry
->d_inode
;
2317 size
= i_size_read(inode
);
2318 if ((page
->mapping
!= inode
->i_mapping
) ||
2319 (page_offset(page
) > size
)) {
2320 /* We overload EFAULT to mean page got truncated */
2325 /* page is wholly or partially inside EOF */
2326 if (((page
->index
+ 1) << PAGE_CACHE_SHIFT
) > size
)
2327 end
= size
& ~PAGE_CACHE_MASK
;
2329 end
= PAGE_CACHE_SIZE
;
2331 ret
= __block_write_begin(page
, 0, end
, get_block
);
2333 ret
= block_commit_write(page
, 0, end
);
2335 if (unlikely(ret
< 0))
2338 * Freezing in progress? We check after the page is marked dirty and
2339 * with page lock held so if the test here fails, we are sure freezing
2340 * code will wait during syncing until the page fault is done - at that
2341 * point page will be dirty and unlocked so freezing code will write it
2342 * and writeprotect it again.
2344 set_page_dirty(page
);
2345 if (inode
->i_sb
->s_frozen
!= SB_UNFROZEN
) {
2349 wait_on_page_writeback(page
);
2355 EXPORT_SYMBOL(__block_page_mkwrite
);
2357 int block_page_mkwrite(struct vm_area_struct
*vma
, struct vm_fault
*vmf
,
2358 get_block_t get_block
)
2361 struct super_block
*sb
= vma
->vm_file
->f_path
.dentry
->d_inode
->i_sb
;
2364 * This check is racy but catches the common case. The check in
2365 * __block_page_mkwrite() is reliable.
2367 vfs_check_frozen(sb
, SB_FREEZE_WRITE
);
2368 ret
= __block_page_mkwrite(vma
, vmf
, get_block
);
2369 return block_page_mkwrite_return(ret
);
2371 EXPORT_SYMBOL(block_page_mkwrite
);
2374 * nobh_write_begin()'s prereads are special: the buffer_heads are freed
2375 * immediately, while under the page lock. So it needs a special end_io
2376 * handler which does not touch the bh after unlocking it.
2378 static void end_buffer_read_nobh(struct buffer_head
*bh
, int uptodate
)
2380 __end_buffer_read_notouch(bh
, uptodate
);
2384 * Attach the singly-linked list of buffers created by nobh_write_begin, to
2385 * the page (converting it to circular linked list and taking care of page
2388 static void attach_nobh_buffers(struct page
*page
, struct buffer_head
*head
)
2390 struct buffer_head
*bh
;
2392 BUG_ON(!PageLocked(page
));
2394 spin_lock(&page
->mapping
->private_lock
);
2397 if (PageDirty(page
))
2398 set_buffer_dirty(bh
);
2399 if (!bh
->b_this_page
)
2400 bh
->b_this_page
= head
;
2401 bh
= bh
->b_this_page
;
2402 } while (bh
!= head
);
2403 attach_page_buffers(page
, head
);
2404 spin_unlock(&page
->mapping
->private_lock
);
2408 * On entry, the page is fully not uptodate.
2409 * On exit the page is fully uptodate in the areas outside (from,to)
2410 * The filesystem needs to handle block truncation upon failure.
2412 int nobh_write_begin(struct address_space
*mapping
,
2413 loff_t pos
, unsigned len
, unsigned flags
,
2414 struct page
**pagep
, void **fsdata
,
2415 get_block_t
*get_block
)
2417 struct inode
*inode
= mapping
->host
;
2418 const unsigned blkbits
= inode
->i_blkbits
;
2419 const unsigned blocksize
= 1 << blkbits
;
2420 struct buffer_head
*head
, *bh
;
2424 unsigned block_in_page
;
2425 unsigned block_start
, block_end
;
2426 sector_t block_in_file
;
2429 int is_mapped_to_disk
= 1;
2431 index
= pos
>> PAGE_CACHE_SHIFT
;
2432 from
= pos
& (PAGE_CACHE_SIZE
- 1);
2435 page
= grab_cache_page_write_begin(mapping
, index
, flags
);
2441 if (page_has_buffers(page
)) {
2442 ret
= __block_write_begin(page
, pos
, len
, get_block
);
2448 if (PageMappedToDisk(page
))
2452 * Allocate buffers so that we can keep track of state, and potentially
2453 * attach them to the page if an error occurs. In the common case of
2454 * no error, they will just be freed again without ever being attached
2455 * to the page (which is all OK, because we're under the page lock).
2457 * Be careful: the buffer linked list is a NULL terminated one, rather
2458 * than the circular one we're used to.
2460 head
= alloc_page_buffers(page
, blocksize
, 0);
2466 block_in_file
= (sector_t
)page
->index
<< (PAGE_CACHE_SHIFT
- blkbits
);
2469 * We loop across all blocks in the page, whether or not they are
2470 * part of the affected region. This is so we can discover if the
2471 * page is fully mapped-to-disk.
2473 for (block_start
= 0, block_in_page
= 0, bh
= head
;
2474 block_start
< PAGE_CACHE_SIZE
;
2475 block_in_page
++, block_start
+= blocksize
, bh
= bh
->b_this_page
) {
2478 block_end
= block_start
+ blocksize
;
2481 if (block_start
>= to
)
2483 ret
= get_block(inode
, block_in_file
+ block_in_page
,
2487 if (!buffer_mapped(bh
))
2488 is_mapped_to_disk
= 0;
2490 unmap_underlying_metadata(bh
->b_bdev
, bh
->b_blocknr
);
2491 if (PageUptodate(page
)) {
2492 set_buffer_uptodate(bh
);
2495 if (buffer_new(bh
) || !buffer_mapped(bh
)) {
2496 zero_user_segments(page
, block_start
, from
,
2500 if (buffer_uptodate(bh
))
2501 continue; /* reiserfs does this */
2502 if (block_start
< from
|| block_end
> to
) {
2504 bh
->b_end_io
= end_buffer_read_nobh
;
2505 submit_bh(READ
, bh
);
2512 * The page is locked, so these buffers are protected from
2513 * any VM or truncate activity. Hence we don't need to care
2514 * for the buffer_head refcounts.
2516 for (bh
= head
; bh
; bh
= bh
->b_this_page
) {
2518 if (!buffer_uptodate(bh
))
2525 if (is_mapped_to_disk
)
2526 SetPageMappedToDisk(page
);
2528 *fsdata
= head
; /* to be released by nobh_write_end */
2535 * Error recovery is a bit difficult. We need to zero out blocks that
2536 * were newly allocated, and dirty them to ensure they get written out.
2537 * Buffers need to be attached to the page at this point, otherwise
2538 * the handling of potential IO errors during writeout would be hard
2539 * (could try doing synchronous writeout, but what if that fails too?)
2541 attach_nobh_buffers(page
, head
);
2542 page_zero_new_buffers(page
, from
, to
);
2546 page_cache_release(page
);
2551 EXPORT_SYMBOL(nobh_write_begin
);
2553 int nobh_write_end(struct file
*file
, struct address_space
*mapping
,
2554 loff_t pos
, unsigned len
, unsigned copied
,
2555 struct page
*page
, void *fsdata
)
2557 struct inode
*inode
= page
->mapping
->host
;
2558 struct buffer_head
*head
= fsdata
;
2559 struct buffer_head
*bh
;
2560 BUG_ON(fsdata
!= NULL
&& page_has_buffers(page
));
2562 if (unlikely(copied
< len
) && head
)
2563 attach_nobh_buffers(page
, head
);
2564 if (page_has_buffers(page
))
2565 return generic_write_end(file
, mapping
, pos
, len
,
2566 copied
, page
, fsdata
);
2568 SetPageUptodate(page
);
2569 set_page_dirty(page
);
2570 if (pos
+copied
> inode
->i_size
) {
2571 i_size_write(inode
, pos
+copied
);
2572 mark_inode_dirty(inode
);
2576 page_cache_release(page
);
2580 head
= head
->b_this_page
;
2581 free_buffer_head(bh
);
2586 EXPORT_SYMBOL(nobh_write_end
);
2589 * nobh_writepage() - based on block_full_write_page() except
2590 * that it tries to operate without attaching bufferheads to
2593 int nobh_writepage(struct page
*page
, get_block_t
*get_block
,
2594 struct writeback_control
*wbc
)
2596 struct inode
* const inode
= page
->mapping
->host
;
2597 loff_t i_size
= i_size_read(inode
);
2598 const pgoff_t end_index
= i_size
>> PAGE_CACHE_SHIFT
;
2602 /* Is the page fully inside i_size? */
2603 if (page
->index
< end_index
)
2606 /* Is the page fully outside i_size? (truncate in progress) */
2607 offset
= i_size
& (PAGE_CACHE_SIZE
-1);
2608 if (page
->index
>= end_index
+1 || !offset
) {
2610 * The page may have dirty, unmapped buffers. For example,
2611 * they may have been added in ext3_writepage(). Make them
2612 * freeable here, so the page does not leak.
2615 /* Not really sure about this - do we need this ? */
2616 if (page
->mapping
->a_ops
->invalidatepage
)
2617 page
->mapping
->a_ops
->invalidatepage(page
, offset
);
2620 return 0; /* don't care */
2624 * The page straddles i_size. It must be zeroed out on each and every
2625 * writepage invocation because it may be mmapped. "A file is mapped
2626 * in multiples of the page size. For a file that is not a multiple of
2627 * the page size, the remaining memory is zeroed when mapped, and
2628 * writes to that region are not written out to the file."
2630 zero_user_segment(page
, offset
, PAGE_CACHE_SIZE
);
2632 ret
= mpage_writepage(page
, get_block
, wbc
);
2634 ret
= __block_write_full_page(inode
, page
, get_block
, wbc
,
2635 end_buffer_async_write
);
2638 EXPORT_SYMBOL(nobh_writepage
);
2640 int nobh_truncate_page(struct address_space
*mapping
,
2641 loff_t from
, get_block_t
*get_block
)
2643 pgoff_t index
= from
>> PAGE_CACHE_SHIFT
;
2644 unsigned offset
= from
& (PAGE_CACHE_SIZE
-1);
2647 unsigned length
, pos
;
2648 struct inode
*inode
= mapping
->host
;
2650 struct buffer_head map_bh
;
2653 blocksize
= 1 << inode
->i_blkbits
;
2654 length
= offset
& (blocksize
- 1);
2656 /* Block boundary? Nothing to do */
2660 length
= blocksize
- length
;
2661 iblock
= (sector_t
)index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
2663 page
= grab_cache_page(mapping
, index
);
2668 if (page_has_buffers(page
)) {
2671 page_cache_release(page
);
2672 return block_truncate_page(mapping
, from
, get_block
);
2675 /* Find the buffer that contains "offset" */
2677 while (offset
>= pos
) {
2682 map_bh
.b_size
= blocksize
;
2684 err
= get_block(inode
, iblock
, &map_bh
, 0);
2687 /* unmapped? It's a hole - nothing to do */
2688 if (!buffer_mapped(&map_bh
))
2691 /* Ok, it's mapped. Make sure it's up-to-date */
2692 if (!PageUptodate(page
)) {
2693 err
= mapping
->a_ops
->readpage(NULL
, page
);
2695 page_cache_release(page
);
2699 if (!PageUptodate(page
)) {
2703 if (page_has_buffers(page
))
2706 zero_user(page
, offset
, length
);
2707 set_page_dirty(page
);
2712 page_cache_release(page
);
2716 EXPORT_SYMBOL(nobh_truncate_page
);
2718 int block_truncate_page(struct address_space
*mapping
,
2719 loff_t from
, get_block_t
*get_block
)
2721 pgoff_t index
= from
>> PAGE_CACHE_SHIFT
;
2722 unsigned offset
= from
& (PAGE_CACHE_SIZE
-1);
2725 unsigned length
, pos
;
2726 struct inode
*inode
= mapping
->host
;
2728 struct buffer_head
*bh
;
2731 blocksize
= 1 << inode
->i_blkbits
;
2732 length
= offset
& (blocksize
- 1);
2734 /* Block boundary? Nothing to do */
2738 length
= blocksize
- length
;
2739 iblock
= (sector_t
)index
<< (PAGE_CACHE_SHIFT
- inode
->i_blkbits
);
2741 page
= grab_cache_page(mapping
, index
);
2746 if (!page_has_buffers(page
))
2747 create_empty_buffers(page
, blocksize
, 0);
2749 /* Find the buffer that contains "offset" */
2750 bh
= page_buffers(page
);
2752 while (offset
>= pos
) {
2753 bh
= bh
->b_this_page
;
2759 if (!buffer_mapped(bh
)) {
2760 WARN_ON(bh
->b_size
!= blocksize
);
2761 err
= get_block(inode
, iblock
, bh
, 0);
2764 /* unmapped? It's a hole - nothing to do */
2765 if (!buffer_mapped(bh
))
2769 /* Ok, it's mapped. Make sure it's up-to-date */
2770 if (PageUptodate(page
))
2771 set_buffer_uptodate(bh
);
2773 if (!buffer_uptodate(bh
) && !buffer_delay(bh
) && !buffer_unwritten(bh
)) {
2775 ll_rw_block(READ
, 1, &bh
);
2777 /* Uhhuh. Read error. Complain and punt. */
2778 if (!buffer_uptodate(bh
))
2782 zero_user(page
, offset
, length
);
2783 mark_buffer_dirty(bh
);
2788 page_cache_release(page
);
2792 EXPORT_SYMBOL(block_truncate_page
);
2795 * The generic ->writepage function for buffer-backed address_spaces
2796 * this form passes in the end_io handler used to finish the IO.
2798 int block_write_full_page_endio(struct page
*page
, get_block_t
*get_block
,
2799 struct writeback_control
*wbc
, bh_end_io_t
*handler
)
2801 struct inode
* const inode
= page
->mapping
->host
;
2802 loff_t i_size
= i_size_read(inode
);
2803 const pgoff_t end_index
= i_size
>> PAGE_CACHE_SHIFT
;
2806 /* Is the page fully inside i_size? */
2807 if (page
->index
< end_index
)
2808 return __block_write_full_page(inode
, page
, get_block
, wbc
,
2811 /* Is the page fully outside i_size? (truncate in progress) */
2812 offset
= i_size
& (PAGE_CACHE_SIZE
-1);
2813 if (page
->index
>= end_index
+1 || !offset
) {
2815 * The page may have dirty, unmapped buffers. For example,
2816 * they may have been added in ext3_writepage(). Make them
2817 * freeable here, so the page does not leak.
2819 do_invalidatepage(page
, 0);
2821 return 0; /* don't care */
2825 * The page straddles i_size. It must be zeroed out on each and every
2826 * writepage invocation because it may be mmapped. "A file is mapped
2827 * in multiples of the page size. For a file that is not a multiple of
2828 * the page size, the remaining memory is zeroed when mapped, and
2829 * writes to that region are not written out to the file."
2831 zero_user_segment(page
, offset
, PAGE_CACHE_SIZE
);
2832 return __block_write_full_page(inode
, page
, get_block
, wbc
, handler
);
2834 EXPORT_SYMBOL(block_write_full_page_endio
);
2837 * The generic ->writepage function for buffer-backed address_spaces
2839 int block_write_full_page(struct page
*page
, get_block_t
*get_block
,
2840 struct writeback_control
*wbc
)
2842 return block_write_full_page_endio(page
, get_block
, wbc
,
2843 end_buffer_async_write
);
2845 EXPORT_SYMBOL(block_write_full_page
);
2847 sector_t
generic_block_bmap(struct address_space
*mapping
, sector_t block
,
2848 get_block_t
*get_block
)
2850 struct buffer_head tmp
;
2851 struct inode
*inode
= mapping
->host
;
2854 tmp
.b_size
= 1 << inode
->i_blkbits
;
2855 get_block(inode
, block
, &tmp
, 0);
2856 return tmp
.b_blocknr
;
2858 EXPORT_SYMBOL(generic_block_bmap
);
2860 static void end_bio_bh_io_sync(struct bio
*bio
, int err
)
2862 struct buffer_head
*bh
= bio
->bi_private
;
2864 if (err
== -EOPNOTSUPP
) {
2865 set_bit(BIO_EOPNOTSUPP
, &bio
->bi_flags
);
2868 if (unlikely (test_bit(BIO_QUIET
,&bio
->bi_flags
)))
2869 set_bit(BH_Quiet
, &bh
->b_state
);
2871 bh
->b_end_io(bh
, test_bit(BIO_UPTODATE
, &bio
->bi_flags
));
2875 int submit_bh(int rw
, struct buffer_head
* bh
)
2880 BUG_ON(!buffer_locked(bh
));
2881 BUG_ON(!buffer_mapped(bh
));
2882 BUG_ON(!bh
->b_end_io
);
2883 BUG_ON(buffer_delay(bh
));
2884 BUG_ON(buffer_unwritten(bh
));
2887 * Only clear out a write error when rewriting
2889 if (test_set_buffer_req(bh
) && (rw
& WRITE
))
2890 clear_buffer_write_io_error(bh
);
2893 * from here on down, it's all bio -- do the initial mapping,
2894 * submit_bio -> generic_make_request may further map this bio around
2896 bio
= bio_alloc(GFP_NOIO
, 1);
2898 bio
->bi_sector
= bh
->b_blocknr
* (bh
->b_size
>> 9);
2899 bio
->bi_bdev
= bh
->b_bdev
;
2900 bio
->bi_io_vec
[0].bv_page
= bh
->b_page
;
2901 bio
->bi_io_vec
[0].bv_len
= bh
->b_size
;
2902 bio
->bi_io_vec
[0].bv_offset
= bh_offset(bh
);
2906 bio
->bi_size
= bh
->b_size
;
2908 bio
->bi_end_io
= end_bio_bh_io_sync
;
2909 bio
->bi_private
= bh
;
2912 submit_bio(rw
, bio
);
2914 if (bio_flagged(bio
, BIO_EOPNOTSUPP
))
2920 EXPORT_SYMBOL(submit_bh
);
2923 * ll_rw_block: low-level access to block devices (DEPRECATED)
2924 * @rw: whether to %READ or %WRITE or maybe %READA (readahead)
2925 * @nr: number of &struct buffer_heads in the array
2926 * @bhs: array of pointers to &struct buffer_head
2928 * ll_rw_block() takes an array of pointers to &struct buffer_heads, and
2929 * requests an I/O operation on them, either a %READ or a %WRITE. The third
2930 * %READA option is described in the documentation for generic_make_request()
2931 * which ll_rw_block() calls.
2933 * This function drops any buffer that it cannot get a lock on (with the
2934 * BH_Lock state bit), any buffer that appears to be clean when doing a write
2935 * request, and any buffer that appears to be up-to-date when doing read
2936 * request. Further it marks as clean buffers that are processed for
2937 * writing (the buffer cache won't assume that they are actually clean
2938 * until the buffer gets unlocked).
2940 * ll_rw_block sets b_end_io to simple completion handler that marks
2941 * the buffer up-to-date (if approriate), unlocks the buffer and wakes
2944 * All of the buffers must be for the same device, and must also be a
2945 * multiple of the current approved size for the device.
2947 void ll_rw_block(int rw
, int nr
, struct buffer_head
*bhs
[])
2951 for (i
= 0; i
< nr
; i
++) {
2952 struct buffer_head
*bh
= bhs
[i
];
2954 if (!trylock_buffer(bh
))
2957 if (test_clear_buffer_dirty(bh
)) {
2958 bh
->b_end_io
= end_buffer_write_sync
;
2960 submit_bh(WRITE
, bh
);
2964 if (!buffer_uptodate(bh
)) {
2965 bh
->b_end_io
= end_buffer_read_sync
;
2974 EXPORT_SYMBOL(ll_rw_block
);
2976 void write_dirty_buffer(struct buffer_head
*bh
, int rw
)
2979 if (!test_clear_buffer_dirty(bh
)) {
2983 bh
->b_end_io
= end_buffer_write_sync
;
2987 EXPORT_SYMBOL(write_dirty_buffer
);
2990 * For a data-integrity writeout, we need to wait upon any in-progress I/O
2991 * and then start new I/O and then wait upon it. The caller must have a ref on
2994 int __sync_dirty_buffer(struct buffer_head
*bh
, int rw
)
2998 WARN_ON(atomic_read(&bh
->b_count
) < 1);
3000 if (test_clear_buffer_dirty(bh
)) {
3002 bh
->b_end_io
= end_buffer_write_sync
;
3003 ret
= submit_bh(rw
, bh
);
3005 if (!ret
&& !buffer_uptodate(bh
))
3012 EXPORT_SYMBOL(__sync_dirty_buffer
);
3014 int sync_dirty_buffer(struct buffer_head
*bh
)
3016 return __sync_dirty_buffer(bh
, WRITE_SYNC
);
3018 EXPORT_SYMBOL(sync_dirty_buffer
);
3021 * try_to_free_buffers() checks if all the buffers on this particular page
3022 * are unused, and releases them if so.
3024 * Exclusion against try_to_free_buffers may be obtained by either
3025 * locking the page or by holding its mapping's private_lock.
3027 * If the page is dirty but all the buffers are clean then we need to
3028 * be sure to mark the page clean as well. This is because the page
3029 * may be against a block device, and a later reattachment of buffers
3030 * to a dirty page will set *all* buffers dirty. Which would corrupt
3031 * filesystem data on the same device.
3033 * The same applies to regular filesystem pages: if all the buffers are
3034 * clean then we set the page clean and proceed. To do that, we require
3035 * total exclusion from __set_page_dirty_buffers(). That is obtained with
3038 * try_to_free_buffers() is non-blocking.
3040 static inline int buffer_busy(struct buffer_head
*bh
)
3042 return atomic_read(&bh
->b_count
) |
3043 (bh
->b_state
& ((1 << BH_Dirty
) | (1 << BH_Lock
)));
3047 drop_buffers(struct page
*page
, struct buffer_head
**buffers_to_free
)
3049 struct buffer_head
*head
= page_buffers(page
);
3050 struct buffer_head
*bh
;
3054 if (buffer_write_io_error(bh
) && page
->mapping
)
3055 set_bit(AS_EIO
, &page
->mapping
->flags
);
3056 if (buffer_busy(bh
))
3058 bh
= bh
->b_this_page
;
3059 } while (bh
!= head
);
3062 struct buffer_head
*next
= bh
->b_this_page
;
3064 if (bh
->b_assoc_map
)
3065 __remove_assoc_queue(bh
);
3067 } while (bh
!= head
);
3068 *buffers_to_free
= head
;
3069 __clear_page_buffers(page
);
3075 int try_to_free_buffers(struct page
*page
)
3077 struct address_space
* const mapping
= page
->mapping
;
3078 struct buffer_head
*buffers_to_free
= NULL
;
3081 BUG_ON(!PageLocked(page
));
3082 if (PageWriteback(page
))
3085 if (mapping
== NULL
) { /* can this still happen? */
3086 ret
= drop_buffers(page
, &buffers_to_free
);
3090 spin_lock(&mapping
->private_lock
);
3091 ret
= drop_buffers(page
, &buffers_to_free
);
3094 * If the filesystem writes its buffers by hand (eg ext3)
3095 * then we can have clean buffers against a dirty page. We
3096 * clean the page here; otherwise the VM will never notice
3097 * that the filesystem did any IO at all.
3099 * Also, during truncate, discard_buffer will have marked all
3100 * the page's buffers clean. We discover that here and clean
3103 * private_lock must be held over this entire operation in order
3104 * to synchronise against __set_page_dirty_buffers and prevent the
3105 * dirty bit from being lost.
3108 cancel_dirty_page(page
, PAGE_CACHE_SIZE
);
3109 spin_unlock(&mapping
->private_lock
);
3111 if (buffers_to_free
) {
3112 struct buffer_head
*bh
= buffers_to_free
;
3115 struct buffer_head
*next
= bh
->b_this_page
;
3116 free_buffer_head(bh
);
3118 } while (bh
!= buffers_to_free
);
3122 EXPORT_SYMBOL(try_to_free_buffers
);
3125 * There are no bdflush tunables left. But distributions are
3126 * still running obsolete flush daemons, so we terminate them here.
3128 * Use of bdflush() is deprecated and will be removed in a future kernel.
3129 * The `flush-X' kernel threads fully replace bdflush daemons and this call.
3131 SYSCALL_DEFINE2(bdflush
, int, func
, long, data
)
3133 static int msg_count
;
3135 if (!capable(CAP_SYS_ADMIN
))
3138 if (msg_count
< 5) {
3141 "warning: process `%s' used the obsolete bdflush"
3142 " system call\n", current
->comm
);
3143 printk(KERN_INFO
"Fix your initscripts?\n");
3152 * Buffer-head allocation
3154 static struct kmem_cache
*bh_cachep
;
3157 * Once the number of bh's in the machine exceeds this level, we start
3158 * stripping them in writeback.
3160 static int max_buffer_heads
;
3162 int buffer_heads_over_limit
;
3164 struct bh_accounting
{
3165 int nr
; /* Number of live bh's */
3166 int ratelimit
; /* Limit cacheline bouncing */
3169 static DEFINE_PER_CPU(struct bh_accounting
, bh_accounting
) = {0, 0};
3171 static void recalc_bh_state(void)
3176 if (__this_cpu_inc_return(bh_accounting
.ratelimit
) - 1 < 4096)
3178 __this_cpu_write(bh_accounting
.ratelimit
, 0);
3179 for_each_online_cpu(i
)
3180 tot
+= per_cpu(bh_accounting
, i
).nr
;
3181 buffer_heads_over_limit
= (tot
> max_buffer_heads
);
3184 struct buffer_head
*alloc_buffer_head(gfp_t gfp_flags
)
3186 struct buffer_head
*ret
= kmem_cache_zalloc(bh_cachep
, gfp_flags
);
3188 INIT_LIST_HEAD(&ret
->b_assoc_buffers
);
3190 __this_cpu_inc(bh_accounting
.nr
);
3196 EXPORT_SYMBOL(alloc_buffer_head
);
3198 void free_buffer_head(struct buffer_head
*bh
)
3200 BUG_ON(!list_empty(&bh
->b_assoc_buffers
));
3201 kmem_cache_free(bh_cachep
, bh
);
3203 __this_cpu_dec(bh_accounting
.nr
);
3207 EXPORT_SYMBOL(free_buffer_head
);
3209 static void buffer_exit_cpu(int cpu
)
3212 struct bh_lru
*b
= &per_cpu(bh_lrus
, cpu
);
3214 for (i
= 0; i
< BH_LRU_SIZE
; i
++) {
3218 this_cpu_add(bh_accounting
.nr
, per_cpu(bh_accounting
, cpu
).nr
);
3219 per_cpu(bh_accounting
, cpu
).nr
= 0;
3222 static int buffer_cpu_notify(struct notifier_block
*self
,
3223 unsigned long action
, void *hcpu
)
3225 if (action
== CPU_DEAD
|| action
== CPU_DEAD_FROZEN
)
3226 buffer_exit_cpu((unsigned long)hcpu
);
3231 * bh_uptodate_or_lock - Test whether the buffer is uptodate
3232 * @bh: struct buffer_head
3234 * Return true if the buffer is up-to-date and false,
3235 * with the buffer locked, if not.
3237 int bh_uptodate_or_lock(struct buffer_head
*bh
)
3239 if (!buffer_uptodate(bh
)) {
3241 if (!buffer_uptodate(bh
))
3247 EXPORT_SYMBOL(bh_uptodate_or_lock
);
3250 * bh_submit_read - Submit a locked buffer for reading
3251 * @bh: struct buffer_head
3253 * Returns zero on success and -EIO on error.
3255 int bh_submit_read(struct buffer_head
*bh
)
3257 BUG_ON(!buffer_locked(bh
));
3259 if (buffer_uptodate(bh
)) {
3265 bh
->b_end_io
= end_buffer_read_sync
;
3266 submit_bh(READ
, bh
);
3268 if (buffer_uptodate(bh
))
3272 EXPORT_SYMBOL(bh_submit_read
);
3274 void __init
buffer_init(void)
3278 bh_cachep
= kmem_cache_create("buffer_head",
3279 sizeof(struct buffer_head
), 0,
3280 (SLAB_RECLAIM_ACCOUNT
|SLAB_PANIC
|
3285 * Limit the bh occupancy to 10% of ZONE_NORMAL
3287 nrpages
= (nr_free_buffer_pages() * 10) / 100;
3288 max_buffer_heads
= nrpages
* (PAGE_SIZE
/ sizeof(struct buffer_head
));
3289 hotcpu_notifier(buffer_cpu_notify
, 0);