2 * Driver for the SWIM3 (Super Woz Integrated Machine 3)
3 * floppy controller found on Power Macintoshes.
5 * Copyright (C) 1996 Paul Mackerras.
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
21 #include <linux/stddef.h>
22 #include <linux/kernel.h>
23 #include <linux/sched.h>
24 #include <linux/timer.h>
25 #include <linux/delay.h>
27 #include <linux/ioctl.h>
28 #include <linux/blkdev.h>
29 #include <linux/interrupt.h>
30 #include <linux/mutex.h>
31 #include <linux/module.h>
32 #include <linux/spinlock.h>
34 #include <asm/dbdma.h>
36 #include <asm/uaccess.h>
37 #include <asm/mediabay.h>
38 #include <asm/machdep.h>
39 #include <asm/pmac_feature.h>
41 #define MAX_FLOPPIES 2
43 static DEFINE_MUTEX(swim3_mutex
);
44 static struct gendisk
*disks
[MAX_FLOPPIES
];
58 #define REG(x) unsigned char x; char x ## _pad[15];
61 * The names for these registers mostly represent speculation on my part.
62 * It will be interesting to see how close they are to the names Apple uses.
66 REG(timer
); /* counts down at 1MHz */
69 REG(select
); /* controls CA0, CA1, CA2 and LSTRB signals */
71 REG(control
); /* writing bits clears them */
72 REG(status
); /* writing bits sets them in control */
74 REG(nseek
); /* # tracks to seek */
75 REG(ctrack
); /* current track number */
76 REG(csect
); /* current sector number */
77 REG(gap3
); /* size of gap 3 in track format */
78 REG(sector
); /* sector # to read or write */
79 REG(nsect
); /* # sectors to read or write */
83 #define control_bic control
84 #define control_bis status
86 /* Bits in select register */
90 /* Bits in control register */
94 #define WRITE_SECTORS 0x10
95 #define DO_ACTION 0x08
96 #define DRIVE2_ENABLE 0x04
97 #define DRIVE_ENABLE 0x02
98 #define INTR_ENABLE 0x01
100 /* Bits in status register */
101 #define FIFO_1BYTE 0x80
102 #define FIFO_2BYTE 0x40
106 #define INTR_PENDING 0x02
107 #define MARK_BYTE 0x01
109 /* Bits in intr and intr_enable registers */
110 #define ERROR_INTR 0x20
111 #define DATA_CHANGED 0x10
112 #define TRANSFER_DONE 0x08
113 #define SEEN_SECTOR 0x04
114 #define SEEK_DONE 0x02
115 #define TIMER_DONE 0x01
117 /* Bits in error register */
118 #define ERR_DATA_CRC 0x80
119 #define ERR_ADDR_CRC 0x40
120 #define ERR_OVERRUN 0x04
121 #define ERR_UNDERRUN 0x01
123 /* Bits in setup register */
124 #define S_SW_RESET 0x80
125 #define S_GCR_WRITE 0x40
126 #define S_IBM_DRIVE 0x20
127 #define S_TEST_MODE 0x10
128 #define S_FCLK_DIV2 0x08
130 #define S_COPY_PROT 0x02
131 #define S_INV_WDATA 0x01
133 /* Select values for swim3_action */
134 #define SEEK_POSITIVE 0
135 #define SEEK_NEGATIVE 4
144 /* Select values for swim3_select and swim3_readbit */
148 #define RELAX 3 /* also eject in progress */
149 #define READ_DATA_0 4
150 #define TWOMEG_DRIVE 5
151 #define SINGLE_SIDED 6 /* drive or diskette is 4MB type? */
152 #define DRIVE_PRESENT 7
155 #define TRACK_ZERO 10
157 #define READ_DATA_1 12
159 #define SEEK_COMPLETE 14
160 #define ONEMEG_MEDIA 15
162 /* Definitions of values used in writing and formatting */
163 #define DATA_ESCAPE 0x99
164 #define GCR_SYNC_EXC 0x3f
165 #define GCR_SYNC_CONV 0x80
166 #define GCR_FIRST_MARK 0xd5
167 #define GCR_SECOND_MARK 0xaa
168 #define GCR_ADDR_MARK "\xd5\xaa\x00"
169 #define GCR_DATA_MARK "\xd5\xaa\x0b"
170 #define GCR_SLIP_BYTE "\x27\xaa"
171 #define GCR_SELF_SYNC "\x3f\xbf\x1e\x34\x3c\x3f"
173 #define DATA_99 "\x99\x99"
174 #define MFM_ADDR_MARK "\x99\xa1\x99\xa1\x99\xa1\x99\xfe"
175 #define MFM_INDEX_MARK "\x99\xc2\x99\xc2\x99\xc2\x99\xfc"
176 #define MFM_GAP_LEN 12
178 struct floppy_state
{
179 enum swim_state state
;
180 struct swim3 __iomem
*swim3
; /* hardware registers */
181 struct dbdma_regs __iomem
*dma
; /* DMA controller registers */
182 int swim3_intr
; /* interrupt number for SWIM3 */
183 int dma_intr
; /* interrupt number for DMA channel */
184 int cur_cyl
; /* cylinder head is on, or -1 */
185 int cur_sector
; /* last sector we saw go past */
186 int req_cyl
; /* the cylinder for the current r/w request */
187 int head
; /* head number ditto */
188 int req_sector
; /* sector number ditto */
189 int scount
; /* # sectors we're transferring at present */
192 int secpercyl
; /* disk geometry information */
195 int write_prot
; /* 1 if write-protected, 0 if not, -1 dunno */
196 struct dbdma_cmd
*dma_cmd
;
199 struct timer_list timeout
;
202 wait_queue_head_t wait
;
204 struct macio_dev
*mdev
;
205 char dbdma_cmd_space
[5 * sizeof(struct dbdma_cmd
)];
207 struct request
*cur_req
;
210 #define swim3_err(fmt, arg...) dev_err(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
211 #define swim3_warn(fmt, arg...) dev_warn(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
212 #define swim3_info(fmt, arg...) dev_info(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
215 #define swim3_dbg(fmt, arg...) dev_dbg(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
217 #define swim3_dbg(fmt, arg...) do { } while(0)
220 static struct floppy_state floppy_states
[MAX_FLOPPIES
];
221 static int floppy_count
= 0;
222 static DEFINE_SPINLOCK(swim3_lock
);
224 static unsigned short write_preamble
[] = {
225 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, /* gap field */
226 0, 0, 0, 0, 0, 0, /* sync field */
227 0x99a1, 0x99a1, 0x99a1, 0x99fb, /* data address mark */
228 0x990f /* no escape for 512 bytes */
231 static unsigned short write_postamble
[] = {
232 0x9904, /* insert CRC */
234 0x9908, /* stop writing */
238 static void seek_track(struct floppy_state
*fs
, int n
);
239 static void init_dma(struct dbdma_cmd
*cp
, int cmd
, void *buf
, int count
);
240 static void act(struct floppy_state
*fs
);
241 static void scan_timeout(unsigned long data
);
242 static void seek_timeout(unsigned long data
);
243 static void settle_timeout(unsigned long data
);
244 static void xfer_timeout(unsigned long data
);
245 static irqreturn_t
swim3_interrupt(int irq
, void *dev_id
);
246 /*static void fd_dma_interrupt(int irq, void *dev_id);*/
247 static int grab_drive(struct floppy_state
*fs
, enum swim_state state
,
249 static void release_drive(struct floppy_state
*fs
);
250 static int fd_eject(struct floppy_state
*fs
);
251 static int floppy_ioctl(struct block_device
*bdev
, fmode_t mode
,
252 unsigned int cmd
, unsigned long param
);
253 static int floppy_open(struct block_device
*bdev
, fmode_t mode
);
254 static int floppy_release(struct gendisk
*disk
, fmode_t mode
);
255 static unsigned int floppy_check_events(struct gendisk
*disk
,
256 unsigned int clearing
);
257 static int floppy_revalidate(struct gendisk
*disk
);
259 static bool swim3_end_request(struct floppy_state
*fs
, int err
, unsigned int nr_bytes
)
261 struct request
*req
= fs
->cur_req
;
264 swim3_dbg(" end request, err=%d nr_bytes=%d, cur_req=%p\n",
268 nr_bytes
= blk_rq_cur_bytes(req
);
269 rc
= __blk_end_request(req
, err
, nr_bytes
);
276 static void swim3_select(struct floppy_state
*fs
, int sel
)
278 struct swim3 __iomem
*sw
= fs
->swim3
;
280 out_8(&sw
->select
, RELAX
);
282 out_8(&sw
->control_bis
, SELECT
);
284 out_8(&sw
->control_bic
, SELECT
);
285 out_8(&sw
->select
, sel
& CA_MASK
);
288 static void swim3_action(struct floppy_state
*fs
, int action
)
290 struct swim3 __iomem
*sw
= fs
->swim3
;
292 swim3_select(fs
, action
);
294 out_8(&sw
->select
, sw
->select
| LSTRB
);
296 out_8(&sw
->select
, sw
->select
& ~LSTRB
);
300 static int swim3_readbit(struct floppy_state
*fs
, int bit
)
302 struct swim3 __iomem
*sw
= fs
->swim3
;
305 swim3_select(fs
, bit
);
307 stat
= in_8(&sw
->status
);
308 return (stat
& DATA
) == 0;
311 static void start_request(struct floppy_state
*fs
)
316 swim3_dbg("start request, initial state=%d\n", fs
->state
);
318 if (fs
->state
== idle
&& fs
->wanted
) {
319 fs
->state
= available
;
323 while (fs
->state
== idle
) {
324 swim3_dbg("start request, idle loop, cur_req=%p\n", fs
->cur_req
);
326 fs
->cur_req
= blk_fetch_request(disks
[fs
->index
]->queue
);
327 swim3_dbg(" fetched request %p\n", fs
->cur_req
);
333 if (fs
->mdev
->media_bay
&&
334 check_media_bay(fs
->mdev
->media_bay
) != MB_FD
) {
335 swim3_dbg("%s", " media bay absent, dropping req\n");
336 swim3_end_request(fs
, -ENODEV
, 0);
340 #if 0 /* This is really too verbose */
341 swim3_dbg("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
342 req
->rq_disk
->disk_name
, req
->cmd
,
343 (long)blk_rq_pos(req
), blk_rq_sectors(req
),
345 swim3_dbg(" errors=%d current_nr_sectors=%u\n",
346 req
->errors
, blk_rq_cur_sectors(req
));
349 if (blk_rq_pos(req
) >= fs
->total_secs
) {
350 swim3_dbg(" pos out of bounds (%ld, max is %ld)\n",
351 (long)blk_rq_pos(req
), (long)fs
->total_secs
);
352 swim3_end_request(fs
, -EIO
, 0);
356 swim3_dbg("%s", " disk ejected\n");
357 swim3_end_request(fs
, -EIO
, 0);
361 if (rq_data_dir(req
) == WRITE
) {
362 if (fs
->write_prot
< 0)
363 fs
->write_prot
= swim3_readbit(fs
, WRITE_PROT
);
364 if (fs
->write_prot
) {
365 swim3_dbg("%s", " try to write, disk write protected\n");
366 swim3_end_request(fs
, -EIO
, 0);
371 /* Do not remove the cast. blk_rq_pos(req) is now a
372 * sector_t and can be 64 bits, but it will never go
373 * past 32 bits for this driver anyway, so we can
374 * safely cast it down and not have to do a 64/32
377 fs
->req_cyl
= ((long)blk_rq_pos(req
)) / fs
->secpercyl
;
378 x
= ((long)blk_rq_pos(req
)) % fs
->secpercyl
;
379 fs
->head
= x
/ fs
->secpertrack
;
380 fs
->req_sector
= x
% fs
->secpertrack
+ 1;
381 fs
->state
= do_transfer
;
388 static void do_fd_request(struct request_queue
* q
)
390 start_request(q
->queuedata
);
393 static void set_timeout(struct floppy_state
*fs
, int nticks
,
394 void (*proc
)(unsigned long))
396 if (fs
->timeout_pending
)
397 del_timer(&fs
->timeout
);
398 fs
->timeout
.expires
= jiffies
+ nticks
;
399 fs
->timeout
.function
= proc
;
400 fs
->timeout
.data
= (unsigned long) fs
;
401 add_timer(&fs
->timeout
);
402 fs
->timeout_pending
= 1;
405 static inline void scan_track(struct floppy_state
*fs
)
407 struct swim3 __iomem
*sw
= fs
->swim3
;
409 swim3_select(fs
, READ_DATA_0
);
410 in_8(&sw
->intr
); /* clear SEEN_SECTOR bit */
412 out_8(&sw
->intr_enable
, SEEN_SECTOR
);
413 out_8(&sw
->control_bis
, DO_ACTION
);
414 /* enable intr when track found */
415 set_timeout(fs
, HZ
, scan_timeout
); /* enable timeout */
418 static inline void seek_track(struct floppy_state
*fs
, int n
)
420 struct swim3 __iomem
*sw
= fs
->swim3
;
423 swim3_action(fs
, SEEK_POSITIVE
);
426 swim3_action(fs
, SEEK_NEGATIVE
);
429 fs
->expect_cyl
= (fs
->cur_cyl
>= 0)? fs
->cur_cyl
+ n
: -1;
430 swim3_select(fs
, STEP
);
432 /* enable intr when seek finished */
433 out_8(&sw
->intr_enable
, SEEK_DONE
);
434 out_8(&sw
->control_bis
, DO_SEEK
);
435 set_timeout(fs
, 3*HZ
, seek_timeout
); /* enable timeout */
439 static inline void init_dma(struct dbdma_cmd
*cp
, int cmd
,
440 void *buf
, int count
)
442 st_le16(&cp
->req_count
, count
);
443 st_le16(&cp
->command
, cmd
);
444 st_le32(&cp
->phy_addr
, virt_to_bus(buf
));
448 static inline void setup_transfer(struct floppy_state
*fs
)
451 struct swim3 __iomem
*sw
= fs
->swim3
;
452 struct dbdma_cmd
*cp
= fs
->dma_cmd
;
453 struct dbdma_regs __iomem
*dr
= fs
->dma
;
454 struct request
*req
= fs
->cur_req
;
456 if (blk_rq_cur_sectors(req
) <= 0) {
457 swim3_warn("%s", "Transfer 0 sectors ?\n");
460 if (rq_data_dir(req
) == WRITE
)
463 n
= fs
->secpertrack
- fs
->req_sector
+ 1;
464 if (n
> blk_rq_cur_sectors(req
))
465 n
= blk_rq_cur_sectors(req
);
468 swim3_dbg(" setup xfer at sect %d (of %d) head %d for %d\n",
469 fs
->req_sector
, fs
->secpertrack
, fs
->head
, n
);
472 swim3_select(fs
, fs
->head
? READ_DATA_1
: READ_DATA_0
);
473 out_8(&sw
->sector
, fs
->req_sector
);
474 out_8(&sw
->nsect
, n
);
476 out_le32(&dr
->cmdptr
, virt_to_bus(cp
));
477 if (rq_data_dir(req
) == WRITE
) {
478 /* Set up 3 dma commands: write preamble, data, postamble */
479 init_dma(cp
, OUTPUT_MORE
, write_preamble
, sizeof(write_preamble
));
481 init_dma(cp
, OUTPUT_MORE
, req
->buffer
, 512);
483 init_dma(cp
, OUTPUT_LAST
, write_postamble
, sizeof(write_postamble
));
485 init_dma(cp
, INPUT_LAST
, req
->buffer
, n
* 512);
488 out_le16(&cp
->command
, DBDMA_STOP
);
489 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
491 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
492 if (rq_data_dir(req
) == WRITE
)
493 out_8(&sw
->control_bis
, WRITE_SECTORS
);
495 out_le32(&dr
->control
, (RUN
<< 16) | RUN
);
496 /* enable intr when transfer complete */
497 out_8(&sw
->intr_enable
, TRANSFER_DONE
);
498 out_8(&sw
->control_bis
, DO_ACTION
);
499 set_timeout(fs
, 2*HZ
, xfer_timeout
); /* enable timeout */
502 static void act(struct floppy_state
*fs
)
505 swim3_dbg(" act loop, state=%d, req_cyl=%d, cur_cyl=%d\n",
506 fs
->state
, fs
->req_cyl
, fs
->cur_cyl
);
510 return; /* XXX shouldn't get here */
513 if (swim3_readbit(fs
, TRACK_ZERO
)) {
514 swim3_dbg("%s", " locate track 0\n");
516 if (fs
->req_cyl
== 0)
517 fs
->state
= do_transfer
;
526 if (fs
->cur_cyl
< 0) {
528 fs
->state
= locating
;
531 if (fs
->req_cyl
== fs
->cur_cyl
) {
532 swim3_warn("%s", "Whoops, seeking 0\n");
533 fs
->state
= do_transfer
;
536 seek_track(fs
, fs
->req_cyl
- fs
->cur_cyl
);
540 /* check for SEEK_COMPLETE after 30ms */
541 fs
->settle_time
= (HZ
+ 32) / 33;
542 set_timeout(fs
, fs
->settle_time
, settle_timeout
);
546 if (fs
->cur_cyl
!= fs
->req_cyl
) {
547 if (fs
->retries
> 5) {
548 swim3_err("Wrong cylinder in transfer, want: %d got %d\n",
549 fs
->req_cyl
, fs
->cur_cyl
);
550 swim3_end_request(fs
, -EIO
, 0);
565 swim3_err("Unknown state %d\n", fs
->state
);
571 static void scan_timeout(unsigned long data
)
573 struct floppy_state
*fs
= (struct floppy_state
*) data
;
574 struct swim3 __iomem
*sw
= fs
->swim3
;
577 swim3_dbg("* scan timeout, state=%d\n", fs
->state
);
579 spin_lock_irqsave(&swim3_lock
, flags
);
580 fs
->timeout_pending
= 0;
581 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
582 out_8(&sw
->select
, RELAX
);
583 out_8(&sw
->intr_enable
, 0);
585 if (fs
->retries
> 5) {
586 swim3_end_request(fs
, -EIO
, 0);
593 spin_unlock_irqrestore(&swim3_lock
, flags
);
596 static void seek_timeout(unsigned long data
)
598 struct floppy_state
*fs
= (struct floppy_state
*) data
;
599 struct swim3 __iomem
*sw
= fs
->swim3
;
602 swim3_dbg("* seek timeout, state=%d\n", fs
->state
);
604 spin_lock_irqsave(&swim3_lock
, flags
);
605 fs
->timeout_pending
= 0;
606 out_8(&sw
->control_bic
, DO_SEEK
);
607 out_8(&sw
->select
, RELAX
);
608 out_8(&sw
->intr_enable
, 0);
609 swim3_err("%s", "Seek timeout\n");
610 swim3_end_request(fs
, -EIO
, 0);
613 spin_unlock_irqrestore(&swim3_lock
, flags
);
616 static void settle_timeout(unsigned long data
)
618 struct floppy_state
*fs
= (struct floppy_state
*) data
;
619 struct swim3 __iomem
*sw
= fs
->swim3
;
622 swim3_dbg("* settle timeout, state=%d\n", fs
->state
);
624 spin_lock_irqsave(&swim3_lock
, flags
);
625 fs
->timeout_pending
= 0;
626 if (swim3_readbit(fs
, SEEK_COMPLETE
)) {
627 out_8(&sw
->select
, RELAX
);
628 fs
->state
= locating
;
632 out_8(&sw
->select
, RELAX
);
633 if (fs
->settle_time
< 2*HZ
) {
635 set_timeout(fs
, 1, settle_timeout
);
638 swim3_err("%s", "Seek settle timeout\n");
639 swim3_end_request(fs
, -EIO
, 0);
643 spin_unlock_irqrestore(&swim3_lock
, flags
);
646 static void xfer_timeout(unsigned long data
)
648 struct floppy_state
*fs
= (struct floppy_state
*) data
;
649 struct swim3 __iomem
*sw
= fs
->swim3
;
650 struct dbdma_regs __iomem
*dr
= fs
->dma
;
654 swim3_dbg("* xfer timeout, state=%d\n", fs
->state
);
656 spin_lock_irqsave(&swim3_lock
, flags
);
657 fs
->timeout_pending
= 0;
658 out_le32(&dr
->control
, RUN
<< 16);
659 /* We must wait a bit for dbdma to stop */
660 for (n
= 0; (in_le32(&dr
->status
) & ACTIVE
) && n
< 1000; n
++)
662 out_8(&sw
->intr_enable
, 0);
663 out_8(&sw
->control_bic
, WRITE_SECTORS
| DO_ACTION
);
664 out_8(&sw
->select
, RELAX
);
665 swim3_err("Timeout %sing sector %ld\n",
666 (rq_data_dir(fs
->cur_req
)==WRITE
? "writ": "read"),
667 (long)blk_rq_pos(fs
->cur_req
));
668 swim3_end_request(fs
, -EIO
, 0);
671 spin_unlock_irqrestore(&swim3_lock
, flags
);
674 static irqreturn_t
swim3_interrupt(int irq
, void *dev_id
)
676 struct floppy_state
*fs
= (struct floppy_state
*) dev_id
;
677 struct swim3 __iomem
*sw
= fs
->swim3
;
680 struct dbdma_regs __iomem
*dr
;
681 struct dbdma_cmd
*cp
;
683 struct request
*req
= fs
->cur_req
;
685 swim3_dbg("* interrupt, state=%d\n", fs
->state
);
687 spin_lock_irqsave(&swim3_lock
, flags
);
688 intr
= in_8(&sw
->intr
);
689 err
= (intr
& ERROR_INTR
)? in_8(&sw
->error
): 0;
690 if ((intr
& ERROR_INTR
) && fs
->state
!= do_transfer
)
691 swim3_err("Non-transfer error interrupt: state=%d, dir=%x, intr=%x, err=%x\n",
692 fs
->state
, rq_data_dir(req
), intr
, err
);
695 if (intr
& SEEN_SECTOR
) {
696 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
697 out_8(&sw
->select
, RELAX
);
698 out_8(&sw
->intr_enable
, 0);
699 del_timer(&fs
->timeout
);
700 fs
->timeout_pending
= 0;
701 if (sw
->ctrack
== 0xff) {
702 swim3_err("%s", "Seen sector but cyl=ff?\n");
704 if (fs
->retries
> 5) {
705 swim3_end_request(fs
, -EIO
, 0);
714 fs
->cur_cyl
= sw
->ctrack
;
715 fs
->cur_sector
= sw
->csect
;
716 if (fs
->expect_cyl
!= -1 && fs
->expect_cyl
!= fs
->cur_cyl
)
717 swim3_err("Expected cyl %d, got %d\n",
718 fs
->expect_cyl
, fs
->cur_cyl
);
719 fs
->state
= do_transfer
;
725 if (sw
->nseek
== 0) {
726 out_8(&sw
->control_bic
, DO_SEEK
);
727 out_8(&sw
->select
, RELAX
);
728 out_8(&sw
->intr_enable
, 0);
729 del_timer(&fs
->timeout
);
730 fs
->timeout_pending
= 0;
731 if (fs
->state
== seeking
)
733 fs
->state
= settling
;
738 out_8(&sw
->intr_enable
, 0);
739 del_timer(&fs
->timeout
);
740 fs
->timeout_pending
= 0;
744 if ((intr
& (ERROR_INTR
| TRANSFER_DONE
)) == 0)
746 out_8(&sw
->intr_enable
, 0);
747 out_8(&sw
->control_bic
, WRITE_SECTORS
| DO_ACTION
);
748 out_8(&sw
->select
, RELAX
);
749 del_timer(&fs
->timeout
);
750 fs
->timeout_pending
= 0;
753 if (rq_data_dir(req
) == WRITE
)
756 * Check that the main data transfer has finished.
757 * On writing, the swim3 sometimes doesn't use
758 * up all the bytes of the postamble, so we can still
759 * see DMA active here. That doesn't matter as long
760 * as all the sector data has been transferred.
762 if ((intr
& ERROR_INTR
) == 0 && cp
->xfer_status
== 0) {
763 /* wait a little while for DMA to complete */
764 for (n
= 0; n
< 100; ++n
) {
765 if (cp
->xfer_status
!= 0)
772 out_le32(&dr
->control
, (RUN
| PAUSE
) << 16);
773 stat
= ld_le16(&cp
->xfer_status
);
774 resid
= ld_le16(&cp
->res_count
);
775 if (intr
& ERROR_INTR
) {
776 n
= fs
->scount
- 1 - resid
/ 512;
778 blk_update_request(req
, 0, n
<< 9);
781 if (fs
->retries
< 5) {
785 swim3_err("Error %sing block %ld (err=%x)\n",
786 rq_data_dir(req
) == WRITE
? "writ": "read",
787 (long)blk_rq_pos(req
), err
);
788 swim3_end_request(fs
, -EIO
, 0);
792 if ((stat
& ACTIVE
) == 0 || resid
!= 0) {
793 /* musta been an error */
794 swim3_err("fd dma error: stat=%x resid=%d\n", stat
, resid
);
795 swim3_err(" state=%d, dir=%x, intr=%x, err=%x\n",
796 fs
->state
, rq_data_dir(req
), intr
, err
);
797 swim3_end_request(fs
, -EIO
, 0);
803 if (swim3_end_request(fs
, 0, fs
->scount
<< 9)) {
804 fs
->req_sector
+= fs
->scount
;
805 if (fs
->req_sector
> fs
->secpertrack
) {
806 fs
->req_sector
-= fs
->secpertrack
;
807 if (++fs
->head
> 1) {
816 if (fs
->state
== idle
)
820 swim3_err("Don't know what to do in state %d\n", fs
->state
);
822 spin_unlock_irqrestore(&swim3_lock
, flags
);
827 static void fd_dma_interrupt(int irq, void *dev_id)
832 /* Called under the mutex to grab exclusive access to a drive */
833 static int grab_drive(struct floppy_state
*fs
, enum swim_state state
,
838 swim3_dbg("%s", "-> grab drive\n");
840 spin_lock_irqsave(&swim3_lock
, flags
);
841 if (fs
->state
!= idle
&& fs
->state
!= available
) {
843 while (fs
->state
!= available
) {
844 spin_unlock_irqrestore(&swim3_lock
, flags
);
845 if (interruptible
&& signal_pending(current
)) {
849 interruptible_sleep_on(&fs
->wait
);
850 spin_lock_irqsave(&swim3_lock
, flags
);
855 spin_unlock_irqrestore(&swim3_lock
, flags
);
860 static void release_drive(struct floppy_state
*fs
)
864 swim3_dbg("%s", "-> release drive\n");
866 spin_lock_irqsave(&swim3_lock
, flags
);
869 spin_unlock_irqrestore(&swim3_lock
, flags
);
872 static int fd_eject(struct floppy_state
*fs
)
876 err
= grab_drive(fs
, ejecting
, 1);
879 swim3_action(fs
, EJECT
);
880 for (n
= 20; n
> 0; --n
) {
881 if (signal_pending(current
)) {
885 swim3_select(fs
, RELAX
);
886 schedule_timeout_interruptible(1);
887 if (swim3_readbit(fs
, DISK_IN
) == 0)
890 swim3_select(fs
, RELAX
);
897 static struct floppy_struct floppy_type
=
898 { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL
}; /* 7 1.44MB 3.5" */
900 static int floppy_locked_ioctl(struct block_device
*bdev
, fmode_t mode
,
901 unsigned int cmd
, unsigned long param
)
903 struct floppy_state
*fs
= bdev
->bd_disk
->private_data
;
906 if ((cmd
& 0x80) && !capable(CAP_SYS_ADMIN
))
909 if (fs
->mdev
->media_bay
&&
910 check_media_bay(fs
->mdev
->media_bay
) != MB_FD
)
915 if (fs
->ref_count
!= 1)
920 if (copy_to_user((void __user
*) param
, &floppy_type
,
921 sizeof(struct floppy_struct
)))
928 static int floppy_ioctl(struct block_device
*bdev
, fmode_t mode
,
929 unsigned int cmd
, unsigned long param
)
933 mutex_lock(&swim3_mutex
);
934 ret
= floppy_locked_ioctl(bdev
, mode
, cmd
, param
);
935 mutex_unlock(&swim3_mutex
);
940 static int floppy_open(struct block_device
*bdev
, fmode_t mode
)
942 struct floppy_state
*fs
= bdev
->bd_disk
->private_data
;
943 struct swim3 __iomem
*sw
= fs
->swim3
;
946 if (fs
->ref_count
== 0) {
947 if (fs
->mdev
->media_bay
&&
948 check_media_bay(fs
->mdev
->media_bay
) != MB_FD
)
950 out_8(&sw
->setup
, S_IBM_DRIVE
| S_FCLK_DIV2
);
951 out_8(&sw
->control_bic
, 0xff);
952 out_8(&sw
->mode
, 0x95);
954 out_8(&sw
->intr_enable
, 0);
955 out_8(&sw
->control_bis
, DRIVE_ENABLE
| INTR_ENABLE
);
956 swim3_action(fs
, MOTOR_ON
);
959 for (n
= 0; n
< 2 * HZ
; ++n
) {
960 if (n
>= HZ
/30 && swim3_readbit(fs
, SEEK_COMPLETE
))
962 if (signal_pending(current
)) {
966 swim3_select(fs
, RELAX
);
967 schedule_timeout_interruptible(1);
969 if (err
== 0 && (swim3_readbit(fs
, SEEK_COMPLETE
) == 0
970 || swim3_readbit(fs
, DISK_IN
) == 0))
972 swim3_action(fs
, SETMFM
);
973 swim3_select(fs
, RELAX
);
975 } else if (fs
->ref_count
== -1 || mode
& FMODE_EXCL
)
978 if (err
== 0 && (mode
& FMODE_NDELAY
) == 0
979 && (mode
& (FMODE_READ
|FMODE_WRITE
))) {
980 check_disk_change(bdev
);
985 if (err
== 0 && (mode
& FMODE_WRITE
)) {
986 if (fs
->write_prot
< 0)
987 fs
->write_prot
= swim3_readbit(fs
, WRITE_PROT
);
993 if (fs
->ref_count
== 0) {
994 swim3_action(fs
, MOTOR_OFF
);
995 out_8(&sw
->control_bic
, DRIVE_ENABLE
| INTR_ENABLE
);
996 swim3_select(fs
, RELAX
);
1001 if (mode
& FMODE_EXCL
)
1009 static int floppy_unlocked_open(struct block_device
*bdev
, fmode_t mode
)
1013 mutex_lock(&swim3_mutex
);
1014 ret
= floppy_open(bdev
, mode
);
1015 mutex_unlock(&swim3_mutex
);
1020 static int floppy_release(struct gendisk
*disk
, fmode_t mode
)
1022 struct floppy_state
*fs
= disk
->private_data
;
1023 struct swim3 __iomem
*sw
= fs
->swim3
;
1025 mutex_lock(&swim3_mutex
);
1026 if (fs
->ref_count
> 0 && --fs
->ref_count
== 0) {
1027 swim3_action(fs
, MOTOR_OFF
);
1028 out_8(&sw
->control_bic
, 0xff);
1029 swim3_select(fs
, RELAX
);
1031 mutex_unlock(&swim3_mutex
);
1035 static unsigned int floppy_check_events(struct gendisk
*disk
,
1036 unsigned int clearing
)
1038 struct floppy_state
*fs
= disk
->private_data
;
1039 return fs
->ejected
? DISK_EVENT_MEDIA_CHANGE
: 0;
1042 static int floppy_revalidate(struct gendisk
*disk
)
1044 struct floppy_state
*fs
= disk
->private_data
;
1045 struct swim3 __iomem
*sw
;
1048 if (fs
->mdev
->media_bay
&&
1049 check_media_bay(fs
->mdev
->media_bay
) != MB_FD
)
1053 grab_drive(fs
, revalidating
, 0);
1054 out_8(&sw
->intr_enable
, 0);
1055 out_8(&sw
->control_bis
, DRIVE_ENABLE
);
1056 swim3_action(fs
, MOTOR_ON
); /* necessary? */
1057 fs
->write_prot
= -1;
1060 for (n
= HZ
; n
> 0; --n
) {
1061 if (swim3_readbit(fs
, SEEK_COMPLETE
))
1063 if (signal_pending(current
))
1065 swim3_select(fs
, RELAX
);
1066 schedule_timeout_interruptible(1);
1068 ret
= swim3_readbit(fs
, SEEK_COMPLETE
) == 0
1069 || swim3_readbit(fs
, DISK_IN
) == 0;
1071 swim3_action(fs
, MOTOR_OFF
);
1074 swim3_action(fs
, SETMFM
);
1076 swim3_select(fs
, RELAX
);
1082 static const struct block_device_operations floppy_fops
= {
1083 .open
= floppy_unlocked_open
,
1084 .release
= floppy_release
,
1085 .ioctl
= floppy_ioctl
,
1086 .check_events
= floppy_check_events
,
1087 .revalidate_disk
= floppy_revalidate
,
1090 static void swim3_mb_event(struct macio_dev
* mdev
, int mb_state
)
1092 struct floppy_state
*fs
= macio_get_drvdata(mdev
);
1093 struct swim3 __iomem
*sw
= fs
->swim3
;
1097 if (mb_state
!= MB_FD
)
1101 out_8(&sw
->intr_enable
, 0);
1106 static int swim3_add_device(struct macio_dev
*mdev
, int index
)
1108 struct device_node
*swim
= mdev
->ofdev
.dev
.of_node
;
1109 struct floppy_state
*fs
= &floppy_states
[index
];
1112 /* Do this first for message macros */
1113 memset(fs
, 0, sizeof(*fs
));
1117 /* Check & Request resources */
1118 if (macio_resource_count(mdev
) < 2) {
1119 swim3_err("%s", "No address in device-tree\n");
1122 if (macio_irq_count(mdev
) < 1) {
1123 swim3_err("%s", "No interrupt in device-tree\n");
1126 if (macio_request_resource(mdev
, 0, "swim3 (mmio)")) {
1127 swim3_err("%s", "Can't request mmio resource\n");
1130 if (macio_request_resource(mdev
, 1, "swim3 (dma)")) {
1131 swim3_err("%s", "Can't request dma resource\n");
1132 macio_release_resource(mdev
, 0);
1135 dev_set_drvdata(&mdev
->ofdev
.dev
, fs
);
1137 if (mdev
->media_bay
== NULL
)
1138 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE
, swim
, 0, 1);
1141 fs
->swim3
= (struct swim3 __iomem
*)
1142 ioremap(macio_resource_start(mdev
, 0), 0x200);
1143 if (fs
->swim3
== NULL
) {
1144 swim3_err("%s", "Couldn't map mmio registers\n");
1148 fs
->dma
= (struct dbdma_regs __iomem
*)
1149 ioremap(macio_resource_start(mdev
, 1), 0x200);
1150 if (fs
->dma
== NULL
) {
1151 swim3_err("%s", "Couldn't map dma registers\n");
1156 fs
->swim3_intr
= macio_irq(mdev
, 0);
1157 fs
->dma_intr
= macio_irq(mdev
, 1);
1159 fs
->cur_sector
= -1;
1161 fs
->secpertrack
= 18;
1162 fs
->total_secs
= 2880;
1163 init_waitqueue_head(&fs
->wait
);
1165 fs
->dma_cmd
= (struct dbdma_cmd
*) DBDMA_ALIGN(fs
->dbdma_cmd_space
);
1166 memset(fs
->dma_cmd
, 0, 2 * sizeof(struct dbdma_cmd
));
1167 st_le16(&fs
->dma_cmd
[1].command
, DBDMA_STOP
);
1169 if (mdev
->media_bay
== NULL
|| check_media_bay(mdev
->media_bay
) == MB_FD
)
1170 swim3_mb_event(mdev
, MB_FD
);
1172 if (request_irq(fs
->swim3_intr
, swim3_interrupt
, 0, "SWIM3", fs
)) {
1173 swim3_err("%s", "Couldn't request interrupt\n");
1174 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE
, swim
, 0, 0);
1179 init_timer(&fs
->timeout
);
1181 swim3_info("SWIM3 floppy controller %s\n",
1182 mdev
->media_bay
? "in media bay" : "");
1191 macio_release_resource(mdev
, 0);
1192 macio_release_resource(mdev
, 1);
1197 static int __devinit
swim3_attach(struct macio_dev
*mdev
, const struct of_device_id
*match
)
1199 struct gendisk
*disk
;
1202 index
= floppy_count
++;
1203 if (index
>= MAX_FLOPPIES
)
1207 rc
= swim3_add_device(mdev
, index
);
1210 /* Now register that disk. Same comment about failure handling */
1211 disk
= disks
[index
] = alloc_disk(1);
1214 disk
->queue
= blk_init_queue(do_fd_request
, &swim3_lock
);
1215 if (disk
->queue
== NULL
) {
1219 disk
->queue
->queuedata
= &floppy_states
[index
];
1222 /* If we failed, there isn't much we can do as the driver is still
1223 * too dumb to remove the device, just bail out
1225 if (register_blkdev(FLOPPY_MAJOR
, "fd"))
1229 disk
->major
= FLOPPY_MAJOR
;
1230 disk
->first_minor
= index
;
1231 disk
->fops
= &floppy_fops
;
1232 disk
->private_data
= &floppy_states
[index
];
1233 disk
->flags
|= GENHD_FL_REMOVABLE
;
1234 sprintf(disk
->disk_name
, "fd%d", index
);
1235 set_capacity(disk
, 2880);
1241 static struct of_device_id swim3_match
[] =
1247 .compatible
= "ohare-swim3"
1250 .compatible
= "swim3"
1252 { /* end of list */ }
1255 static struct macio_driver swim3_driver
=
1259 .of_match_table
= swim3_match
,
1261 .probe
= swim3_attach
,
1262 #ifdef CONFIG_PMAC_MEDIABAY
1263 .mediabay_event
= swim3_mb_event
,
1266 .suspend
= swim3_suspend
,
1267 .resume
= swim3_resume
,
1272 int swim3_init(void)
1274 macio_register_driver(&swim3_driver
);
1278 module_init(swim3_init
)
1280 MODULE_LICENSE("GPL");
1281 MODULE_AUTHOR("Paul Mackerras");
1282 MODULE_ALIAS_BLOCKDEV_MAJOR(FLOPPY_MAJOR
);