drivers/usb/host/ohci-sa1111.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * SA1111 Bus Glue
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Russell King et al.
  12  *
  13  * This file is licenced under the GPL.
  14  */
  15
  16 #include <mach/hardware.h>
  17 #include <asm/mach-types.h>
  18 #include <mach/assabet.h>
  19 #include <asm/hardware/sa1111.h>
  20
  21 #ifndef CONFIG_SA1111
  22 #error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
  23 #endif
  24
  25 #define USB_STATUS      0x0118
  26 #define USB_RESET       0x011c
  27 #define USB_IRQTEST     0x0120
  28
  29 #define USB_RESET_FORCEIFRESET  (1 << 0)
  30 #define USB_RESET_FORCEHCRESET  (1 << 1)
  31 #define USB_RESET_CLKGENRESET   (1 << 2)
  32 #define USB_RESET_SIMSCALEDOWN  (1 << 3)
  33 #define USB_RESET_USBINTTEST    (1 << 4)
  34 #define USB_RESET_SLEEPSTBYEN   (1 << 5)
  35 #define USB_RESET_PWRSENSELOW   (1 << 6)
  36 #define USB_RESET_PWRCTRLLOW    (1 << 7)
  37
  38 #define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
  39 #define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
  40 #define USB_STATUS_NIRQHCIM       (1 <<  9)
  41 #define USB_STATUS_NHCIMFCLR      (1 << 10)
  42 #define USB_STATUS_USBPWRSENSE    (1 << 11)
  43
  44 #if 0
  45 static void dump_hci_status(struct usb_hcd *hcd, const char *label)
  46 {
  47         unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
  48
  49         dbg("%s USB_STATUS = { %s%s%s%s%s}", label,
  50              ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
  51              ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
  52              ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
  53              ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
  54              ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
  55 }
  56 #endif
  57
  58 static int ohci_sa1111_reset(struct usb_hcd *hcd)
  59 {
  60         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
  61
  62         ohci_hcd_init(ohci);
  63         return ohci_init(ohci);
  64 }
  65
  66 static int __devinit ohci_sa1111_start(struct usb_hcd *hcd)
  67 {
  68         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
  69         int ret;
  70
  71         ret = ohci_run(ohci);
  72         if (ret < 0) {
  73                 ohci_err(ohci, "can't start\n");
  74                 ohci_stop(hcd);
  75         }
  76         return ret;
  77 }
  78
  79 static const struct hc_driver ohci_sa1111_hc_driver = {
  80         .description =          hcd_name,
  81         .product_desc =         "SA-1111 OHCI",
  82         .hcd_priv_size =        sizeof(struct ohci_hcd),
  83
  84         /*
  85          * generic hardware linkage
  86          */
  87         .irq =                  ohci_irq,
  88         .flags =                HCD_USB11 | HCD_MEMORY,
  89
  90         /*
  91          * basic lifecycle operations
  92          */
  93         .reset =                ohci_sa1111_reset,
  94         .start =                ohci_sa1111_start,
  95         .stop =                 ohci_stop,
  96         .shutdown =             ohci_shutdown,
  97
  98         /*
  99          * managing i/o requests and associated device resources
 100          */
 101         .urb_enqueue =          ohci_urb_enqueue,
 102         .urb_dequeue =          ohci_urb_dequeue,
 103         .endpoint_disable =     ohci_endpoint_disable,
 104
 105         /*
 106          * scheduling support
 107          */
 108         .get_frame_number =     ohci_get_frame,
 109
 110         /*
 111          * root hub support
 112          */
 113         .hub_status_data =      ohci_hub_status_data,
 114         .hub_control =          ohci_hub_control,
 115 #ifdef  CONFIG_PM
 116         .bus_suspend =          ohci_bus_suspend,
 117         .bus_resume =           ohci_bus_resume,
 118 #endif
 119         .start_port_reset =     ohci_start_port_reset,
 120 };
 121
 122 static int sa1111_start_hc(struct sa1111_dev *dev)
 123 {
 124         unsigned int usb_rst = 0;
 125         int ret;
 126
 127         dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
 128
 129         if (machine_is_xp860() ||
 130             machine_has_neponset() ||
 131             machine_is_pfs168() ||
 132             machine_is_badge4())
 133                 usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
 134
 135         /*
 136          * Configure the power sense and control lines.  Place the USB
 137          * host controller in reset.
 138          */
 139         sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
 140                       dev->mapbase + USB_RESET);
 141
 142         /*
 143          * Now, carefully enable the USB clock, and take
 144          * the USB host controller out of reset.
 145          */
 146         ret = sa1111_enable_device(dev);
 147         if (ret == 0) {
 148                 udelay(11);
 149                 sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
 150         }
 151
 152         return ret;
 153 }
 154
 155 static void sa1111_stop_hc(struct sa1111_dev *dev)
 156 {
 157         unsigned int usb_rst;
 158
 159         dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
 160
 161         /*
 162          * Put the USB host controller into reset.
 163          */
 164         usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
 165         sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
 166                       dev->mapbase + USB_RESET);
 167
 168         /*
 169          * Stop the USB clock.
 170          */
 171         sa1111_disable_device(dev);
 172 }
 173
 174 /**
 175  * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
 176  *
 177  * Allocates basic resources for this USB host controller, and
 178  * then invokes the start() method for the HCD associated with it.
 179  */
 180 static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 181 {
 182         struct usb_hcd *hcd;
 183         int ret;
 184
 185         if (usb_disabled())
 186                 return -ENODEV;
 187
 188         hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
 189         if (!hcd)
 190                 return -ENOMEM;
 191
 192         hcd->rsrc_start = dev->res.start;
 193         hcd->rsrc_len = resource_size(&dev->res);
 194
 195         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 196                 dbg("request_mem_region failed");
 197                 ret = -EBUSY;
 198                 goto err1;
 199         }
 200
 201         hcd->regs = dev->mapbase;
 202
 203         ret = sa1111_start_hc(dev);
 204         if (ret)
 205                 goto err2;
 206
 207         ret = usb_add_hcd(hcd, dev->irq[1], 0);
 208         if (ret == 0)
 209                 return ret;
 210
 211         sa1111_stop_hc(dev);
 212  err2:
 213         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 214  err1:
 215         usb_put_hcd(hcd);
 216         return ret;
 217 }
 218
 219 /**
 220  * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
 221  * @dev: USB Host Controller being removed
 222  *
 223  * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
 224  * the HCD's stop() method.
 225  */
 226 static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
 227 {
 228         struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 229
 230         usb_remove_hcd(hcd);
 231         sa1111_stop_hc(dev);
 232         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 233         usb_put_hcd(hcd);
 234
 235         return 0;
 236 }
 237
 238 static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
 239 {
 240         struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 241
 242         if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
 243                 hcd->driver->shutdown(hcd);
 244                 sa1111_stop_hc(dev);
 245         }
 246 }
 247
 248 static struct sa1111_driver ohci_hcd_sa1111_driver = {
 249         .drv = {
 250                 .name   = "sa1111-ohci",
 251                 .owner  = THIS_MODULE,
 252         },
 253         .devid          = SA1111_DEVID_USB,
 254         .probe          = ohci_hcd_sa1111_probe,
 255         .remove         = ohci_hcd_sa1111_remove,
 256         .shutdown       = ohci_hcd_sa1111_shutdown,
 257 };