memcg: always create memsw files if CONFIG_CGROUP_MEM_RES_CTLR_SWAP
[linux-2.6.git] / drivers / staging / winbond / wb35rx.c
blobf118eeba396ae195bb77da4a9d8a518570accbe4
1 /*
2 * ============================================================================
3 * Copyright (c) 1996-2002 Winbond Electronic Corporation
5 * Module Name:
6 * Wb35Rx.c
8 * Abstract:
9 * Processing the Rx message from down layer
11 * ============================================================================
13 #include <linux/usb.h>
14 #include <linux/slab.h>
16 #include "core.h"
17 #include "wb35rx_f.h"
19 static void packet_came(struct ieee80211_hw *hw, char *pRxBufferAddress, int PacketSize)
21 struct wbsoft_priv *priv = hw->priv;
22 struct sk_buff *skb;
23 struct ieee80211_rx_status rx_status = {0};
25 if (!priv->enabled)
26 return;
28 skb = dev_alloc_skb(PacketSize);
29 if (!skb) {
30 printk("Not enough memory for packet, FIXME\n");
31 return;
34 memcpy(skb_put(skb, PacketSize), pRxBufferAddress, PacketSize);
36 memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
37 ieee80211_rx_irqsafe(hw, skb);
40 static void Wb35Rx_adjust(struct wb35_descriptor *pRxDes)
42 u32 *pRxBufferAddress;
43 u32 DecryptionMethod;
44 u32 i;
45 u16 BufferSize;
47 DecryptionMethod = pRxDes->R01.R01_decryption_method;
48 pRxBufferAddress = pRxDes->buffer_address[0];
49 BufferSize = pRxDes->buffer_size[0];
51 /* Adjust the last part of data. Only data left */
52 BufferSize -= 4; /* For CRC-32 */
53 if (DecryptionMethod)
54 BufferSize -= 4;
55 if (DecryptionMethod == 3) /* For CCMP */
56 BufferSize -= 4;
58 /* Adjust the IV field which after 802.11 header and ICV field. */
59 if (DecryptionMethod == 1) { /* For WEP */
60 for (i = 6; i > 0; i--)
61 pRxBufferAddress[i] = pRxBufferAddress[i - 1];
62 pRxDes->buffer_address[0] = pRxBufferAddress + 1;
63 BufferSize -= 4; /* 4 byte for IV */
64 } else if (DecryptionMethod) { /* For TKIP and CCMP */
65 for (i = 7; i > 1; i--)
66 pRxBufferAddress[i] = pRxBufferAddress[i - 2];
67 pRxDes->buffer_address[0] = pRxBufferAddress + 2; /* Update the descriptor, shift 8 byte */
68 BufferSize -= 8; /* 8 byte for IV + ICV */
70 pRxDes->buffer_size[0] = BufferSize;
73 static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
75 struct wbsoft_priv *priv = hw->priv;
76 struct hw_data *pHwData = &priv->sHwData;
77 struct wb35_descriptor RxDes;
78 struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
79 u8 *pRxBufferAddress;
80 u16 PacketSize;
81 u16 stmp, BufferSize, stmp2 = 0;
82 u32 RxBufferId;
84 /* Only one thread be allowed to run into the following */
85 do {
86 RxBufferId = pWb35Rx->RxProcessIndex;
87 if (pWb35Rx->RxOwner[RxBufferId]) /* Owner by VM */
88 break;
90 pWb35Rx->RxProcessIndex++;
91 pWb35Rx->RxProcessIndex %= MAX_USB_RX_BUFFER_NUMBER;
93 pRxBufferAddress = pWb35Rx->pDRx;
94 BufferSize = pWb35Rx->RxBufferSize[RxBufferId];
96 /* Parse the bulkin buffer */
97 while (BufferSize >= 4) {
98 if ((cpu_to_le32(*(u32 *)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) /* Is ending? */
99 break;
101 /* Get the R00 R01 first */
102 RxDes.R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
103 PacketSize = (u16)RxDes.R00.R00_receive_byte_count;
104 RxDes.R01.value = le32_to_cpu(*((u32 *)(pRxBufferAddress + 4)));
105 /* For new DMA 4k */
106 if ((PacketSize & 0x03) > 0)
107 PacketSize -= 4;
109 /* Basic check for Rx length. Is length valid? */
110 if (PacketSize > MAX_PACKET_SIZE) {
111 pr_debug("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
112 pWb35Rx->EP3vm_state = VM_STOP;
113 pWb35Rx->Ep3ErrorCount2++;
114 break;
118 * Wb35Rx_indicate() is called synchronously so it isn't
119 * necessary to set "RxDes.Desctriptor_ID = RxBufferID;"
121 BufferSize -= 8; /* subtract 8 byte for 35's USB header length */
122 pRxBufferAddress += 8;
124 RxDes.buffer_address[0] = pRxBufferAddress;
125 RxDes.buffer_size[0] = PacketSize;
126 RxDes.buffer_number = 1;
127 RxDes.buffer_start_index = 0;
128 RxDes.buffer_total_size = RxDes.buffer_size[0];
129 Wb35Rx_adjust(&RxDes);
131 packet_came(hw, pRxBufferAddress, PacketSize);
133 /* Move RxBuffer point to the next */
134 stmp = PacketSize + 3;
135 stmp &= ~0x03; /* 4n alignment */
136 pRxBufferAddress += stmp;
137 BufferSize -= stmp;
138 stmp2 += stmp;
141 /* Reclaim resource */
142 pWb35Rx->RxOwner[RxBufferId] = 1;
143 } while (true);
144 return stmp2;
147 static void Wb35Rx(struct ieee80211_hw *hw);
149 static void Wb35Rx_Complete(struct urb *urb)
151 struct ieee80211_hw *hw = urb->context;
152 struct wbsoft_priv *priv = hw->priv;
153 struct hw_data *pHwData = &priv->sHwData;
154 struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
155 u8 *pRxBufferAddress;
156 u32 SizeCheck;
157 u16 BulkLength;
158 u32 RxBufferId;
159 struct R00_descriptor R00;
161 /* Variable setting */
162 pWb35Rx->EP3vm_state = VM_COMPLETED;
163 pWb35Rx->EP3VM_status = urb->status; /* Store the last result of Irp */
165 RxBufferId = pWb35Rx->CurrentRxBufferId;
167 pRxBufferAddress = pWb35Rx->pDRx;
168 BulkLength = (u16)urb->actual_length;
170 /* The IRP is completed */
171 pWb35Rx->EP3vm_state = VM_COMPLETED;
173 if (pHwData->SurpriseRemove) /* Must be here, or RxBufferId is invalid */
174 goto error;
176 if (pWb35Rx->rx_halt)
177 goto error;
179 /* Start to process the data only in successful condition */
180 pWb35Rx->RxOwner[RxBufferId] = 0; /* Set the owner to driver */
181 R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
183 /* The URB is completed, check the result */
184 if (pWb35Rx->EP3VM_status != 0) {
185 pr_debug("EP3 IoCompleteRoutine return error\n");
186 pWb35Rx->EP3vm_state = VM_STOP;
187 goto error;
190 /* For recovering. check if operating in single USB mode */
191 if (!HAL_USB_MODE_BURST(pHwData)) {
192 SizeCheck = R00.R00_receive_byte_count;
193 if ((SizeCheck & 0x03) > 0)
194 SizeCheck -= 4;
195 SizeCheck = (SizeCheck + 3) & ~0x03;
196 SizeCheck += 12; /* 8 + 4 badbeef */
197 if ((BulkLength > 1600) ||
198 (SizeCheck > 1600) ||
199 (BulkLength != SizeCheck) ||
200 (BulkLength == 0)) { /* Add for fail Urb */
201 pWb35Rx->EP3vm_state = VM_STOP;
202 pWb35Rx->Ep3ErrorCount2++;
206 /* Indicating the receiving data */
207 pWb35Rx->ByteReceived += BulkLength;
208 pWb35Rx->RxBufferSize[RxBufferId] = BulkLength;
210 if (!pWb35Rx->RxOwner[RxBufferId])
211 Wb35Rx_indicate(hw);
213 kfree(pWb35Rx->pDRx);
214 /* Do the next receive */
215 Wb35Rx(hw);
216 return;
218 error:
219 pWb35Rx->RxOwner[RxBufferId] = 1; /* Set the owner to hardware */
220 atomic_dec(&pWb35Rx->RxFireCounter);
221 pWb35Rx->EP3vm_state = VM_STOP;
224 /* This function cannot reentrain */
225 static void Wb35Rx(struct ieee80211_hw *hw)
227 struct wbsoft_priv *priv = hw->priv;
228 struct hw_data *pHwData = &priv->sHwData;
229 struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
230 u8 *pRxBufferAddress;
231 struct urb *urb = pWb35Rx->RxUrb;
232 int retv;
233 u32 RxBufferId;
235 /* Issuing URB */
236 if (pHwData->SurpriseRemove)
237 goto error;
239 if (pWb35Rx->rx_halt)
240 goto error;
242 /* Get RxBuffer's ID */
243 RxBufferId = pWb35Rx->RxBufferId;
244 if (!pWb35Rx->RxOwner[RxBufferId]) {
245 /* It's impossible to run here. */
246 pr_debug("Rx driver fifo unavailable\n");
247 goto error;
250 /* Update buffer point, then start to bulkin the data from USB */
251 pWb35Rx->RxBufferId++;
252 pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;
254 pWb35Rx->CurrentRxBufferId = RxBufferId;
256 pWb35Rx->pDRx = kzalloc(MAX_USB_RX_BUFFER, GFP_ATOMIC);
257 if (!pWb35Rx->pDRx) {
258 printk("w35und: Rx memory alloc failed\n");
259 goto error;
261 pRxBufferAddress = pWb35Rx->pDRx;
263 usb_fill_bulk_urb(urb, pHwData->udev,
264 usb_rcvbulkpipe(pHwData->udev, 3),
265 pRxBufferAddress, MAX_USB_RX_BUFFER,
266 Wb35Rx_Complete, hw);
268 pWb35Rx->EP3vm_state = VM_RUNNING;
270 retv = usb_submit_urb(urb, GFP_ATOMIC);
272 if (retv != 0) {
273 printk("Rx URB sending error\n");
274 goto error;
276 return;
278 error:
279 /* VM stop */
280 pWb35Rx->EP3vm_state = VM_STOP;
281 atomic_dec(&pWb35Rx->RxFireCounter);
284 void Wb35Rx_start(struct ieee80211_hw *hw)
286 struct wbsoft_priv *priv = hw->priv;
287 struct hw_data *pHwData = &priv->sHwData;
288 struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
290 /* Allow only one thread to run into the Wb35Rx() function */
291 if (atomic_inc_return(&pWb35Rx->RxFireCounter) == 1) {
292 pWb35Rx->EP3vm_state = VM_RUNNING;
293 Wb35Rx(hw);
294 } else
295 atomic_dec(&pWb35Rx->RxFireCounter);
298 static void Wb35Rx_reset_descriptor(struct hw_data *pHwData)
300 struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
301 u32 i;
303 pWb35Rx->ByteReceived = 0;
304 pWb35Rx->RxProcessIndex = 0;
305 pWb35Rx->RxBufferId = 0;
306 pWb35Rx->EP3vm_state = VM_STOP;
307 pWb35Rx->rx_halt = 0;
309 /* Initial the Queue. The last buffer is reserved for used if the Rx resource is unavailable. */
310 for (i = 0; i < MAX_USB_RX_BUFFER_NUMBER; i++)
311 pWb35Rx->RxOwner[i] = 1;
314 unsigned char Wb35Rx_initial(struct hw_data *pHwData)
316 struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
318 /* Initial the Buffer Queue */
319 Wb35Rx_reset_descriptor(pHwData);
321 pWb35Rx->RxUrb = usb_alloc_urb(0, GFP_ATOMIC);
322 return !!pWb35Rx->RxUrb;
325 void Wb35Rx_stop(struct hw_data *pHwData)
327 struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
329 /* Canceling the Irp if already sends it out. */
330 if (pWb35Rx->EP3vm_state == VM_RUNNING) {
331 usb_unlink_urb(pWb35Rx->RxUrb); /* Only use unlink, let Wb35Rx_destroy to free them */
332 pr_debug("EP3 Rx stop\n");
336 /* Needs process context */
337 void Wb35Rx_destroy(struct hw_data *pHwData)
339 struct wb35_rx *pWb35Rx = &pHwData->Wb35Rx;
341 do {
342 msleep(10); /* Delay for waiting function enter */
343 } while (pWb35Rx->EP3vm_state != VM_STOP);
344 msleep(10); /* Delay for waiting function exit */
346 if (pWb35Rx->RxUrb)
347 usb_free_urb(pWb35Rx->RxUrb);
348 pr_debug("Wb35Rx_destroy OK\n");