memcg: always create memsw files if CONFIG_CGROUP_MEM_RES_CTLR_SWAP
[linux-2.6.git] / drivers / md / raid10.h
blob7c615613c3818c59264e34ebc2c6d91879c3d776
1 #ifndef _RAID10_H
2 #define _RAID10_H
4 struct mirror_info {
5 struct md_rdev *rdev, *replacement;
6 sector_t head_position;
7 int recovery_disabled; /* matches
8 * mddev->recovery_disabled
9 * when we shouldn't try
10 * recovering this device.
14 struct r10conf {
15 struct mddev *mddev;
16 struct mirror_info *mirrors;
17 int raid_disks;
18 spinlock_t device_lock;
20 /* geometry */
21 int near_copies; /* number of copies laid out
22 * raid0 style */
23 int far_copies; /* number of copies laid out
24 * at large strides across drives
26 int far_offset; /* far_copies are offset by 1
27 * stripe instead of many
29 int copies; /* near_copies * far_copies.
30 * must be <= raid_disks
32 sector_t stride; /* distance between far copies.
33 * This is size / far_copies unless
34 * far_offset, in which case it is
35 * 1 stripe.
38 sector_t dev_sectors; /* temp copy of
39 * mddev->dev_sectors */
41 int chunk_shift; /* shift from chunks to sectors */
42 sector_t chunk_mask;
44 struct list_head retry_list;
45 /* queue pending writes and submit them on unplug */
46 struct bio_list pending_bio_list;
47 int pending_count;
49 spinlock_t resync_lock;
50 int nr_pending;
51 int nr_waiting;
52 int nr_queued;
53 int barrier;
54 sector_t next_resync;
55 int fullsync; /* set to 1 if a full sync is needed,
56 * (fresh device added).
57 * Cleared when a sync completes.
59 int have_replacement; /* There is at least one
60 * replacement device.
62 wait_queue_head_t wait_barrier;
64 mempool_t *r10bio_pool;
65 mempool_t *r10buf_pool;
66 struct page *tmppage;
68 /* When taking over an array from a different personality, we store
69 * the new thread here until we fully activate the array.
71 struct md_thread *thread;
75 * this is our 'private' RAID10 bio.
77 * it contains information about what kind of IO operations were started
78 * for this RAID10 operation, and about their status:
81 struct r10bio {
82 atomic_t remaining; /* 'have we finished' count,
83 * used from IRQ handlers
85 sector_t sector; /* virtual sector number */
86 int sectors;
87 unsigned long state;
88 struct mddev *mddev;
90 * original bio going to /dev/mdx
92 struct bio *master_bio;
94 * if the IO is in READ direction, then this is where we read
96 int read_slot;
98 struct list_head retry_list;
100 * if the IO is in WRITE direction, then multiple bios are used,
101 * one for each copy.
102 * When resyncing we also use one for each copy.
103 * When reconstructing, we use 2 bios, one for read, one for write.
104 * We choose the number when they are allocated.
105 * We sometimes need an extra bio to write to the replacement.
107 struct {
108 struct bio *bio;
109 union {
110 struct bio *repl_bio; /* used for resync and
111 * writes */
112 struct md_rdev *rdev; /* used for reads
113 * (read_slot >= 0) */
115 sector_t addr;
116 int devnum;
117 } devs[0];
120 /* when we get a read error on a read-only array, we redirect to another
121 * device without failing the first device, or trying to over-write to
122 * correct the read error. To keep track of bad blocks on a per-bio
123 * level, we store IO_BLOCKED in the appropriate 'bios' pointer
125 #define IO_BLOCKED ((struct bio*)1)
126 /* When we successfully write to a known bad-block, we need to remove the
127 * bad-block marking which must be done from process context. So we record
128 * the success by setting devs[n].bio to IO_MADE_GOOD
130 #define IO_MADE_GOOD ((struct bio *)2)
132 #define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
134 /* bits for r10bio.state */
135 enum r10bio_state {
136 R10BIO_Uptodate,
137 R10BIO_IsSync,
138 R10BIO_IsRecover,
139 R10BIO_Degraded,
140 /* Set ReadError on bios that experience a read error
141 * so that raid10d knows what to do with them.
143 R10BIO_ReadError,
144 /* If a write for this request means we can clear some
145 * known-bad-block records, we set this flag.
147 R10BIO_MadeGood,
148 R10BIO_WriteError,
150 #endif