2 * IDE ATAPI floppy driver.
4 * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il>
5 * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net>
6 * Copyright (C) 2005 Bartlomiej Zolnierkiewicz
10 * The driver currently doesn't have any fancy features, just the bare
11 * minimum read/write support.
13 * This driver supports the following IDE floppy drives:
15 * LS-120/240 SuperDisk
17 * Iomega PC Card Clik!/PocketZip
19 * For a historical changelog see
20 * Documentation/ide/ChangeLog.ide-floppy.1996-2002
23 #define IDEFLOPPY_VERSION "0.99.newide"
25 #include <linux/module.h>
26 #include <linux/types.h>
27 #include <linux/string.h>
28 #include <linux/kernel.h>
29 #include <linux/delay.h>
30 #include <linux/timer.h>
32 #include <linux/interrupt.h>
33 #include <linux/major.h>
34 #include <linux/errno.h>
35 #include <linux/genhd.h>
36 #include <linux/slab.h>
37 #include <linux/cdrom.h>
38 #include <linux/ide.h>
39 #include <linux/bitops.h>
40 #include <linux/mutex.h>
42 #include <scsi/scsi_ioctl.h>
44 #include <asm/byteorder.h>
45 #include <linux/irq.h>
46 #include <linux/uaccess.h>
48 #include <asm/unaligned.h>
51 * The following are used to debug the driver.
53 #define IDEFLOPPY_DEBUG_LOG 0
54 #define IDEFLOPPY_DEBUG_INFO 0
56 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
57 #define IDEFLOPPY_DEBUG( fmt, args... )
59 #if IDEFLOPPY_DEBUG_LOG
60 #define debug_log(fmt, args...) \
61 printk(KERN_INFO "ide-floppy: " fmt, ## args)
63 #define debug_log(fmt, args... ) do {} while(0)
68 * Some drives require a longer irq timeout.
70 #define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
73 * After each failed packet command we issue a request sense command
74 * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times.
76 #define IDEFLOPPY_MAX_PC_RETRIES 3
79 * With each packet command, we allocate a buffer of
80 * IDEFLOPPY_PC_BUFFER_SIZE bytes.
82 #define IDEFLOPPY_PC_BUFFER_SIZE 256
85 * In various places in the driver, we need to allocate storage
86 * for packet commands and requests, which will remain valid while
87 * we leave the driver to wait for an interrupt or a timeout event.
89 #define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
92 * Our view of a packet command.
94 typedef struct idefloppy_packet_command_s
{
95 u8 c
[12]; /* Actual packet bytes */
96 int retries
; /* On each retry, we increment retries */
97 int error
; /* Error code */
98 int request_transfer
; /* Bytes to transfer */
99 int actually_transferred
; /* Bytes actually transferred */
100 int buffer_size
; /* Size of our data buffer */
101 int b_count
; /* Missing/Available data on the current buffer */
102 struct request
*rq
; /* The corresponding request */
103 u8
*buffer
; /* Data buffer */
104 u8
*current_position
; /* Pointer into the above buffer */
105 void (*callback
) (ide_drive_t
*); /* Called when this packet command is completed */
106 u8 pc_buffer
[IDEFLOPPY_PC_BUFFER_SIZE
]; /* Temporary buffer */
107 unsigned long flags
; /* Status/Action bit flags: long for set_bit */
111 * Packet command flag bits.
113 #define PC_ABORT 0 /* Set when an error is considered normal - We won't retry */
114 #define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */
115 #define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */
116 #define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */
117 #define PC_WRITING 5 /* Data direction */
119 #define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */
121 /* format capacities descriptor codes */
122 #define CAPACITY_INVALID 0x00
123 #define CAPACITY_UNFORMATTED 0x01
124 #define CAPACITY_CURRENT 0x02
125 #define CAPACITY_NO_CARTRIDGE 0x03
128 * Most of our global data which we need to save even as we leave the
129 * driver due to an interrupt or a timer event is stored in a variable
130 * of type idefloppy_floppy_t, defined below.
132 typedef struct ide_floppy_obj
{
134 ide_driver_t
*driver
;
135 struct gendisk
*disk
;
137 unsigned int openers
; /* protected by BKL for now */
139 /* Current packet command */
141 /* Last failed packet command */
142 idefloppy_pc_t
*failed_pc
;
143 /* Packet command stack */
144 idefloppy_pc_t pc_stack
[IDEFLOPPY_PC_STACK
];
145 /* Next free packet command storage space */
147 struct request rq_stack
[IDEFLOPPY_PC_STACK
];
148 /* We implement a circular array */
152 * Last error information
154 u8 sense_key
, asc
, ascq
;
155 /* delay this long before sending packet command */
157 int progress_indication
;
163 int blocks
, block_size
, bs_factor
;
164 /* Last format capacity descriptor */
166 /* Copy of the flexible disk page */
167 u8 flexible_disk_page
[32];
170 /* Supports format progress report */
172 /* Status/Action flags */
174 } idefloppy_floppy_t
;
176 #define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
179 * Floppy flag bits values.
181 #define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */
182 #define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */
183 #define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */
184 #define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */
185 #define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */
188 * Defines for the mode sense command
190 #define MODE_SENSE_CURRENT 0x00
191 #define MODE_SENSE_CHANGEABLE 0x01
192 #define MODE_SENSE_DEFAULT 0x02
193 #define MODE_SENSE_SAVED 0x03
196 * IOCTLs used in low-level formatting.
199 #define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
200 #define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
201 #define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
202 #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
205 * Error codes which are returned in rq->errors to the higher part
208 #define IDEFLOPPY_ERROR_GENERAL 101
211 * The following is used to format the general configuration word of
212 * the ATAPI IDENTIFY DEVICE command.
214 struct idefloppy_id_gcw
{
215 #if defined(__LITTLE_ENDIAN_BITFIELD)
216 unsigned packet_size
:2; /* Packet Size */
217 unsigned reserved234
:3; /* Reserved */
218 unsigned drq_type
:2; /* Command packet DRQ type */
219 unsigned removable
:1; /* Removable media */
220 unsigned device_type
:5; /* Device type */
221 unsigned reserved13
:1; /* Reserved */
222 unsigned protocol
:2; /* Protocol type */
223 #elif defined(__BIG_ENDIAN_BITFIELD)
224 unsigned protocol
:2; /* Protocol type */
225 unsigned reserved13
:1; /* Reserved */
226 unsigned device_type
:5; /* Device type */
227 unsigned removable
:1; /* Removable media */
228 unsigned drq_type
:2; /* Command packet DRQ type */
229 unsigned reserved234
:3; /* Reserved */
230 unsigned packet_size
:2; /* Packet Size */
232 #error "Bitfield endianness not defined! Check your byteorder.h"
237 * Pages of the SELECT SENSE / MODE SENSE packet commands.
238 * See SFF-8070i spec.
240 #define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
241 #define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
243 static DEFINE_MUTEX(idefloppy_ref_mutex
);
245 #define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
247 #define ide_floppy_g(disk) \
248 container_of((disk)->private_data, struct ide_floppy_obj, driver)
250 static struct ide_floppy_obj
*ide_floppy_get(struct gendisk
*disk
)
252 struct ide_floppy_obj
*floppy
= NULL
;
254 mutex_lock(&idefloppy_ref_mutex
);
255 floppy
= ide_floppy_g(disk
);
257 kref_get(&floppy
->kref
);
258 mutex_unlock(&idefloppy_ref_mutex
);
262 static void idefloppy_cleanup_obj(struct kref
*);
264 static void ide_floppy_put(struct ide_floppy_obj
*floppy
)
266 mutex_lock(&idefloppy_ref_mutex
);
267 kref_put(&floppy
->kref
, idefloppy_cleanup_obj
);
268 mutex_unlock(&idefloppy_ref_mutex
);
272 * Too bad. The drive wants to send us data which we are not ready to accept.
273 * Just throw it away.
275 static void idefloppy_discard_data (ide_drive_t
*drive
, unsigned int bcount
)
278 (void) HWIF(drive
)->INB(IDE_DATA_REG
);
281 static void idefloppy_write_zeros(ide_drive_t
*drive
, unsigned int bcount
)
284 HWIF(drive
)->OUTB(0, IDE_DATA_REG
);
289 * idefloppy_do_end_request is used to finish servicing a request.
291 * For read/write requests, we will call ide_end_request to pass to the
294 static int idefloppy_do_end_request(ide_drive_t
*drive
, int uptodate
, int nsecs
)
296 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
297 struct request
*rq
= HWGROUP(drive
)->rq
;
300 debug_log("Reached %s\n", __func__
);
303 case 0: error
= IDEFLOPPY_ERROR_GENERAL
; break;
304 case 1: error
= 0; break;
305 default: error
= uptodate
;
308 floppy
->failed_pc
= NULL
;
309 /* Why does this happen? */
312 if (!blk_special_request(rq
)) {
313 /* our real local end request function */
314 ide_end_request(drive
, uptodate
, nsecs
);
318 /* fixme: need to move this local also */
319 ide_end_drive_cmd(drive
, 0, 0);
323 static void ide_floppy_io_buffers(ide_drive_t
*drive
, idefloppy_pc_t
*pc
,
324 unsigned int bcount
, int direction
)
326 struct request
*rq
= pc
->rq
;
327 struct req_iterator iter
;
328 struct bio_vec
*bvec
;
333 rq_for_each_segment(bvec
, rq
, iter
) {
337 count
= min(bvec
->bv_len
, bcount
);
339 data
= bvec_kmap_irq(bvec
, &flags
);
341 drive
->hwif
->atapi_output_bytes(drive
, data
, count
);
343 drive
->hwif
->atapi_input_bytes(drive
, data
, count
);
344 bvec_kunmap_irq(data
, &flags
);
347 pc
->b_count
+= count
;
351 idefloppy_do_end_request(drive
, 1, done
>> 9);
354 printk(KERN_ERR
"%s: leftover data in %s, bcount == %d\n",
355 drive
->name
, __func__
, bcount
);
357 idefloppy_write_zeros(drive
, bcount
);
359 idefloppy_discard_data(drive
, bcount
);
364 static void idefloppy_update_buffers (ide_drive_t
*drive
, idefloppy_pc_t
*pc
)
366 struct request
*rq
= pc
->rq
;
367 struct bio
*bio
= rq
->bio
;
369 while ((bio
= rq
->bio
) != NULL
)
370 idefloppy_do_end_request(drive
, 1, 0);
374 * idefloppy_queue_pc_head generates a new packet command request in front
375 * of the request queue, before the current request, so that it will be
376 * processed immediately, on the next pass through the driver.
378 static void idefloppy_queue_pc_head (ide_drive_t
*drive
,idefloppy_pc_t
*pc
,struct request
*rq
)
380 struct ide_floppy_obj
*floppy
= drive
->driver_data
;
382 ide_init_drive_cmd(rq
);
383 rq
->buffer
= (char *) pc
;
384 rq
->cmd_type
= REQ_TYPE_SPECIAL
;
385 rq
->rq_disk
= floppy
->disk
;
386 (void) ide_do_drive_cmd(drive
, rq
, ide_preempt
);
389 static idefloppy_pc_t
*idefloppy_next_pc_storage (ide_drive_t
*drive
)
391 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
393 if (floppy
->pc_stack_index
== IDEFLOPPY_PC_STACK
)
394 floppy
->pc_stack_index
=0;
395 return (&floppy
->pc_stack
[floppy
->pc_stack_index
++]);
398 static struct request
*idefloppy_next_rq_storage (ide_drive_t
*drive
)
400 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
402 if (floppy
->rq_stack_index
== IDEFLOPPY_PC_STACK
)
403 floppy
->rq_stack_index
= 0;
404 return (&floppy
->rq_stack
[floppy
->rq_stack_index
++]);
407 static void idefloppy_request_sense_callback(ide_drive_t
*drive
)
409 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
410 u8
*buf
= floppy
->pc
->buffer
;
412 debug_log("Reached %s\n", __func__
);
414 if (!floppy
->pc
->error
) {
415 floppy
->sense_key
= buf
[2] & 0x0F;
416 floppy
->asc
= buf
[12];
417 floppy
->ascq
= buf
[13];
418 floppy
->progress_indication
= buf
[15] & 0x80 ?
419 (u16
)get_unaligned((u16
*)&buf
[16]) : 0x10000;
421 if (floppy
->failed_pc
)
422 debug_log("pc = %x, sense key = %x, asc = %x,"
424 floppy
->failed_pc
->c
[0],
429 debug_log("sense key = %x, asc = %x, ascq = %x\n",
435 idefloppy_do_end_request(drive
, 1, 0);
437 printk(KERN_ERR
"Error in REQUEST SENSE itself - Aborting"
439 idefloppy_do_end_request(drive
, 0, 0);
444 * General packet command callback function.
446 static void idefloppy_pc_callback (ide_drive_t
*drive
)
448 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
450 debug_log("Reached %s\n", __func__
);
452 idefloppy_do_end_request(drive
, floppy
->pc
->error
? 0 : 1, 0);
456 * idefloppy_init_pc initializes a packet command.
458 static void idefloppy_init_pc (idefloppy_pc_t
*pc
)
460 memset(pc
->c
, 0, 12);
463 pc
->request_transfer
= 0;
464 pc
->buffer
= pc
->pc_buffer
;
465 pc
->buffer_size
= IDEFLOPPY_PC_BUFFER_SIZE
;
466 pc
->callback
= &idefloppy_pc_callback
;
469 static void idefloppy_create_request_sense_cmd (idefloppy_pc_t
*pc
)
471 idefloppy_init_pc(pc
);
472 pc
->c
[0] = GPCMD_REQUEST_SENSE
;
474 pc
->request_transfer
= 18;
475 pc
->callback
= &idefloppy_request_sense_callback
;
479 * idefloppy_retry_pc is called when an error was detected during the
480 * last packet command. We queue a request sense packet command in
481 * the head of the request list.
483 static void idefloppy_retry_pc (ide_drive_t
*drive
)
488 (void)drive
->hwif
->INB(IDE_ERROR_REG
);
489 pc
= idefloppy_next_pc_storage(drive
);
490 rq
= idefloppy_next_rq_storage(drive
);
491 idefloppy_create_request_sense_cmd(pc
);
492 idefloppy_queue_pc_head(drive
, pc
, rq
);
495 /* The usual interrupt handler called during a packet command. */
496 static ide_startstop_t
idefloppy_pc_intr (ide_drive_t
*drive
)
498 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
499 ide_hwif_t
*hwif
= drive
->hwif
;
500 idefloppy_pc_t
*pc
= floppy
->pc
;
501 struct request
*rq
= pc
->rq
;
502 xfer_func_t
*xferfunc
;
508 debug_log("Reached %s interrupt handler\n", __func__
);
510 if (test_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
)) {
511 dma_error
= hwif
->ide_dma_end(drive
);
513 printk(KERN_ERR
"%s: DMA %s error\n", drive
->name
,
514 rq_data_dir(rq
) ? "write" : "read");
515 set_bit(PC_DMA_ERROR
, &pc
->flags
);
517 pc
->actually_transferred
= pc
->request_transfer
;
518 idefloppy_update_buffers(drive
, pc
);
520 debug_log("DMA finished\n");
523 /* Clear the interrupt */
524 stat
= drive
->hwif
->INB(IDE_STATUS_REG
);
526 if ((stat
& DRQ_STAT
) == 0) { /* No more interrupts */
527 debug_log("Packet command completed, %d bytes transferred\n",
528 pc
->actually_transferred
);
529 clear_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
);
531 local_irq_enable_in_hardirq();
533 if ((stat
& ERR_STAT
) || test_bit(PC_DMA_ERROR
, &pc
->flags
)) {
535 debug_log("%s: I/O error\n", drive
->name
);
537 if (pc
->c
[0] == GPCMD_REQUEST_SENSE
) {
538 printk(KERN_ERR
"ide-floppy: I/O error in "
539 "request sense command\n");
540 return ide_do_reset(drive
);
542 /* Retry operation */
543 idefloppy_retry_pc(drive
);
544 /* queued, but not started */
548 if (floppy
->failed_pc
== pc
)
549 floppy
->failed_pc
= NULL
;
550 /* Command finished - Call the callback function */
555 if (test_and_clear_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
)) {
556 printk(KERN_ERR
"ide-floppy: The floppy wants to issue "
557 "more interrupts in DMA mode\n");
559 return ide_do_reset(drive
);
562 /* Get the number of bytes to transfer */
563 bcount
= (hwif
->INB(IDE_BCOUNTH_REG
) << 8) |
564 hwif
->INB(IDE_BCOUNTL_REG
);
565 /* on this interrupt */
566 ireason
= hwif
->INB(IDE_IREASON_REG
);
569 printk(KERN_ERR
"ide-floppy: CoD != 0 in %s\n", __func__
);
570 return ide_do_reset(drive
);
572 if (((ireason
& IO
) == IO
) == test_bit(PC_WRITING
, &pc
->flags
)) {
573 /* Hopefully, we will never get here */
574 printk(KERN_ERR
"ide-floppy: We wanted to %s, ",
575 (ireason
& IO
) ? "Write" : "Read");
576 printk(KERN_ERR
"but the floppy wants us to %s !\n",
577 (ireason
& IO
) ? "Read" : "Write");
578 return ide_do_reset(drive
);
580 if (!test_bit(PC_WRITING
, &pc
->flags
)) {
581 /* Reading - Check that we have enough space */
582 temp
= pc
->actually_transferred
+ bcount
;
583 if (temp
> pc
->request_transfer
) {
584 if (temp
> pc
->buffer_size
) {
585 printk(KERN_ERR
"ide-floppy: The floppy wants "
586 "to send us more data than expected "
587 "- discarding data\n");
588 idefloppy_discard_data(drive
, bcount
);
590 ide_set_handler(drive
,
596 debug_log("The floppy wants to send us more data than"
597 " expected - allowing transfer\n");
600 if (test_bit(PC_WRITING
, &pc
->flags
))
601 xferfunc
= hwif
->atapi_output_bytes
;
603 xferfunc
= hwif
->atapi_input_bytes
;
606 xferfunc(drive
, pc
->current_position
, bcount
);
608 ide_floppy_io_buffers(drive
, pc
, bcount
,
609 test_bit(PC_WRITING
, &pc
->flags
));
611 /* Update the current position */
612 pc
->actually_transferred
+= bcount
;
613 pc
->current_position
+= bcount
;
615 /* And set the interrupt handler again */
616 ide_set_handler(drive
, &idefloppy_pc_intr
, IDEFLOPPY_WAIT_CMD
, NULL
);
621 * This is the original routine that did the packet transfer.
622 * It fails at high speeds on the Iomega ZIP drive, so there's a slower version
623 * for that drive below. The algorithm is chosen based on drive type
625 static ide_startstop_t
idefloppy_transfer_pc (ide_drive_t
*drive
)
627 ide_startstop_t startstop
;
628 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
631 if (ide_wait_stat(&startstop
, drive
, DRQ_STAT
, BUSY_STAT
, WAIT_READY
)) {
632 printk(KERN_ERR
"ide-floppy: Strange, packet command "
633 "initiated yet DRQ isn't asserted\n");
636 ireason
= drive
->hwif
->INB(IDE_IREASON_REG
);
637 if ((ireason
& CD
) == 0 || (ireason
& IO
)) {
638 printk(KERN_ERR
"ide-floppy: (IO,CoD) != (0,1) while "
639 "issuing a packet command\n");
640 return ide_do_reset(drive
);
643 /* Set the interrupt routine */
644 ide_set_handler(drive
, &idefloppy_pc_intr
, IDEFLOPPY_WAIT_CMD
, NULL
);
645 /* Send the actual packet */
646 HWIF(drive
)->atapi_output_bytes(drive
, floppy
->pc
->c
, 12);
652 * What we have here is a classic case of a top half / bottom half
653 * interrupt service routine. In interrupt mode, the device sends
654 * an interrupt to signal it's ready to receive a packet. However,
655 * we need to delay about 2-3 ticks before issuing the packet or we
658 * So, follow carefully. transfer_pc1 is called as an interrupt (or
659 * directly). In either case, when the device says it's ready for a
660 * packet, we schedule the packet transfer to occur about 2-3 ticks
661 * later in transfer_pc2.
663 static int idefloppy_transfer_pc2 (ide_drive_t
*drive
)
665 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
667 /* Send the actual packet */
668 HWIF(drive
)->atapi_output_bytes(drive
, floppy
->pc
->c
, 12);
669 /* Timeout for the packet command */
670 return IDEFLOPPY_WAIT_CMD
;
673 static ide_startstop_t
idefloppy_transfer_pc1 (ide_drive_t
*drive
)
675 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
676 ide_startstop_t startstop
;
679 if (ide_wait_stat(&startstop
, drive
, DRQ_STAT
, BUSY_STAT
, WAIT_READY
)) {
680 printk(KERN_ERR
"ide-floppy: Strange, packet command "
681 "initiated yet DRQ isn't asserted\n");
684 ireason
= drive
->hwif
->INB(IDE_IREASON_REG
);
685 if ((ireason
& CD
) == 0 || (ireason
& IO
)) {
686 printk(KERN_ERR
"ide-floppy: (IO,CoD) != (0,1) "
687 "while issuing a packet command\n");
688 return ide_do_reset(drive
);
691 * The following delay solves a problem with ATAPI Zip 100 drives
692 * where the Busy flag was apparently being deasserted before the
693 * unit was ready to receive data. This was happening on a
694 * 1200 MHz Athlon system. 10/26/01 25msec is too short,
695 * 40 and 50msec work well. idefloppy_pc_intr will not be actually
696 * used until after the packet is moved in about 50 msec.
699 ide_set_handler(drive
,
700 &idefloppy_pc_intr
, /* service routine for packet command */
701 floppy
->ticks
, /* wait this long before "failing" */
702 &idefloppy_transfer_pc2
); /* fail == transfer_pc2 */
706 static void ide_floppy_report_error(idefloppy_floppy_t
*floppy
,
709 /* supress error messages resulting from Medium not present */
710 if (floppy
->sense_key
== 0x02 &&
711 floppy
->asc
== 0x3a &&
712 floppy
->ascq
== 0x00)
715 printk(KERN_ERR
"ide-floppy: %s: I/O error, pc = %2x, key = %2x, "
716 "asc = %2x, ascq = %2x\n",
717 floppy
->drive
->name
, pc
->c
[0], floppy
->sense_key
,
718 floppy
->asc
, floppy
->ascq
);
723 * Issue a packet command
725 static ide_startstop_t
idefloppy_issue_pc (ide_drive_t
*drive
, idefloppy_pc_t
*pc
)
727 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
728 ide_hwif_t
*hwif
= drive
->hwif
;
729 ide_handler_t
*pkt_xfer_routine
;
733 if (floppy
->failed_pc
== NULL
&&
734 pc
->c
[0] != GPCMD_REQUEST_SENSE
)
735 floppy
->failed_pc
= pc
;
736 /* Set the current packet command */
739 if (pc
->retries
> IDEFLOPPY_MAX_PC_RETRIES
||
740 test_bit(PC_ABORT
, &pc
->flags
)) {
742 * We will "abort" retrying a packet command in case
743 * a legitimate error code was received.
745 if (!test_bit(PC_ABORT
, &pc
->flags
)) {
746 if (!test_bit(PC_SUPPRESS_ERROR
, &pc
->flags
))
747 ide_floppy_report_error(floppy
, pc
);
749 pc
->error
= IDEFLOPPY_ERROR_GENERAL
;
751 floppy
->failed_pc
= NULL
;
756 debug_log("Retry number - %d\n", pc
->retries
);
759 /* We haven't transferred any data yet */
760 pc
->actually_transferred
= 0;
761 pc
->current_position
= pc
->buffer
;
762 bcount
= min(pc
->request_transfer
, 63 * 1024);
764 if (test_and_clear_bit(PC_DMA_ERROR
, &pc
->flags
))
769 if (test_bit(PC_DMA_RECOMMENDED
, &pc
->flags
) && drive
->using_dma
)
770 dma
= !hwif
->dma_setup(drive
);
772 ide_pktcmd_tf_load(drive
, IDE_TFLAG_NO_SELECT_MASK
|
773 IDE_TFLAG_OUT_DEVICE
, bcount
, dma
);
775 if (dma
) { /* Begin DMA, if necessary */
776 set_bit(PC_DMA_IN_PROGRESS
, &pc
->flags
);
777 hwif
->dma_start(drive
);
780 /* Can we transfer the packet when we get the interrupt or wait? */
781 if (test_bit(IDEFLOPPY_ZIP_DRIVE
, &floppy
->flags
)) {
783 pkt_xfer_routine
= &idefloppy_transfer_pc1
;
786 pkt_xfer_routine
= &idefloppy_transfer_pc
;
789 if (test_bit (IDEFLOPPY_DRQ_INTERRUPT
, &floppy
->flags
)) {
790 /* Issue the packet command */
791 ide_execute_command(drive
, WIN_PACKETCMD
,
797 /* Issue the packet command */
798 HWIF(drive
)->OUTB(WIN_PACKETCMD
, IDE_COMMAND_REG
);
799 return (*pkt_xfer_routine
) (drive
);
803 static void idefloppy_rw_callback (ide_drive_t
*drive
)
805 debug_log("Reached %s\n", __func__
);
807 idefloppy_do_end_request(drive
, 1, 0);
811 static void idefloppy_create_prevent_cmd (idefloppy_pc_t
*pc
, int prevent
)
813 debug_log("creating prevent removal command, prevent = %d\n", prevent
);
815 idefloppy_init_pc(pc
);
816 pc
->c
[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL
;
820 static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t
*pc
)
822 idefloppy_init_pc(pc
);
823 pc
->c
[0] = GPCMD_READ_FORMAT_CAPACITIES
;
826 pc
->request_transfer
= 255;
829 static void idefloppy_create_format_unit_cmd (idefloppy_pc_t
*pc
, int b
, int l
,
832 idefloppy_init_pc(pc
);
833 pc
->c
[0] = GPCMD_FORMAT_UNIT
;
836 memset(pc
->buffer
, 0, 12);
837 pc
->buffer
[1] = 0xA2;
838 /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
840 if (flags
& 1) /* Verify bit on... */
841 pc
->buffer
[1] ^= 0x20; /* ... turn off DCRT bit */
844 put_unaligned(cpu_to_be32(b
), (unsigned int *)(&pc
->buffer
[4]));
845 put_unaligned(cpu_to_be32(l
), (unsigned int *)(&pc
->buffer
[8]));
847 set_bit(PC_WRITING
, &pc
->flags
);
851 * A mode sense command is used to "sense" floppy parameters.
853 static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t
*pc
, u8 page_code
, u8 type
)
855 u16 length
= 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
857 idefloppy_init_pc(pc
);
858 pc
->c
[0] = GPCMD_MODE_SENSE_10
;
860 pc
->c
[2] = page_code
+ (type
<< 6);
863 case IDEFLOPPY_CAPABILITIES_PAGE
:
866 case IDEFLOPPY_FLEXIBLE_DISK_PAGE
:
870 printk(KERN_ERR
"ide-floppy: unsupported page code "
871 "in create_mode_sense_cmd\n");
873 put_unaligned(cpu_to_be16(length
), (u16
*) &pc
->c
[7]);
874 pc
->request_transfer
= length
;
877 static void idefloppy_create_start_stop_cmd (idefloppy_pc_t
*pc
, int start
)
879 idefloppy_init_pc(pc
);
880 pc
->c
[0] = GPCMD_START_STOP_UNIT
;
884 static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t
*pc
)
886 idefloppy_init_pc(pc
);
887 pc
->c
[0] = GPCMD_TEST_UNIT_READY
;
890 static void idefloppy_create_rw_cmd(idefloppy_floppy_t
*floppy
,
891 idefloppy_pc_t
*pc
, struct request
*rq
,
892 unsigned long sector
)
894 int block
= sector
/ floppy
->bs_factor
;
895 int blocks
= rq
->nr_sectors
/ floppy
->bs_factor
;
896 int cmd
= rq_data_dir(rq
);
898 debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
901 idefloppy_init_pc(pc
);
902 pc
->c
[0] = cmd
== READ
? GPCMD_READ_10
: GPCMD_WRITE_10
;
903 put_unaligned(cpu_to_be16(blocks
), (unsigned short *)&pc
->c
[7]);
904 put_unaligned(cpu_to_be32(block
), (unsigned int *) &pc
->c
[2]);
906 pc
->callback
= &idefloppy_rw_callback
;
908 pc
->b_count
= cmd
== READ
? 0 : rq
->bio
->bi_size
;
909 if (rq
->cmd_flags
& REQ_RW
)
910 set_bit(PC_WRITING
, &pc
->flags
);
912 pc
->request_transfer
= pc
->buffer_size
= blocks
* floppy
->block_size
;
913 set_bit(PC_DMA_RECOMMENDED
, &pc
->flags
);
917 idefloppy_blockpc_cmd(idefloppy_floppy_t
*floppy
, idefloppy_pc_t
*pc
, struct request
*rq
)
919 idefloppy_init_pc(pc
);
920 pc
->callback
= &idefloppy_rw_callback
;
921 memcpy(pc
->c
, rq
->cmd
, sizeof(pc
->c
));
923 pc
->b_count
= rq
->data_len
;
924 if (rq
->data_len
&& rq_data_dir(rq
) == WRITE
)
925 set_bit(PC_WRITING
, &pc
->flags
);
926 pc
->buffer
= rq
->data
;
928 set_bit(PC_DMA_RECOMMENDED
, &pc
->flags
);
931 * possibly problematic, doesn't look like ide-floppy correctly
932 * handled scattered requests if dma fails...
934 pc
->request_transfer
= pc
->buffer_size
= rq
->data_len
;
938 * idefloppy_do_request is our request handling function.
940 static ide_startstop_t
idefloppy_do_request (ide_drive_t
*drive
, struct request
*rq
, sector_t block_s
)
942 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
944 unsigned long block
= (unsigned long)block_s
;
946 debug_log("dev: %s, cmd_type: %x, errors: %d\n",
947 rq
->rq_disk
? rq
->rq_disk
->disk_name
: "?",
948 rq
->cmd_type
, rq
->errors
);
949 debug_log("sector: %ld, nr_sectors: %ld, "
950 "current_nr_sectors: %d\n", (long)rq
->sector
,
951 rq
->nr_sectors
, rq
->current_nr_sectors
);
953 if (rq
->errors
>= ERROR_MAX
) {
954 if (floppy
->failed_pc
)
955 ide_floppy_report_error(floppy
, floppy
->failed_pc
);
957 printk(KERN_ERR
"ide-floppy: %s: I/O error\n",
959 idefloppy_do_end_request(drive
, 0, 0);
962 if (blk_fs_request(rq
)) {
963 if (((long)rq
->sector
% floppy
->bs_factor
) ||
964 (rq
->nr_sectors
% floppy
->bs_factor
)) {
965 printk("%s: unsupported r/w request size\n",
967 idefloppy_do_end_request(drive
, 0, 0);
970 pc
= idefloppy_next_pc_storage(drive
);
971 idefloppy_create_rw_cmd(floppy
, pc
, rq
, block
);
972 } else if (blk_special_request(rq
)) {
973 pc
= (idefloppy_pc_t
*) rq
->buffer
;
974 } else if (blk_pc_request(rq
)) {
975 pc
= idefloppy_next_pc_storage(drive
);
976 idefloppy_blockpc_cmd(floppy
, pc
, rq
);
978 blk_dump_rq_flags(rq
,
979 "ide-floppy: unsupported command in queue");
980 idefloppy_do_end_request(drive
, 0, 0);
985 return idefloppy_issue_pc(drive
, pc
);
989 * idefloppy_queue_pc_tail adds a special packet command request to the
990 * tail of the request queue, and waits for it to be serviced.
992 static int idefloppy_queue_pc_tail (ide_drive_t
*drive
,idefloppy_pc_t
*pc
)
994 struct ide_floppy_obj
*floppy
= drive
->driver_data
;
997 ide_init_drive_cmd (&rq
);
998 rq
.buffer
= (char *) pc
;
999 rq
.cmd_type
= REQ_TYPE_SPECIAL
;
1000 rq
.rq_disk
= floppy
->disk
;
1002 return ide_do_drive_cmd(drive
, &rq
, ide_wait
);
1006 * Look at the flexible disk page parameters. We ignore the CHS capacity
1007 * parameters and use the LBA parameters instead.
1009 static int ide_floppy_get_flexible_disk_page(ide_drive_t
*drive
)
1011 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
1014 int capacity
, lba_capacity
;
1015 u16 transfer_rate
, sector_size
, cyls
, rpm
;
1018 idefloppy_create_mode_sense_cmd(&pc
, IDEFLOPPY_FLEXIBLE_DISK_PAGE
,
1019 MODE_SENSE_CURRENT
);
1021 if (idefloppy_queue_pc_tail(drive
, &pc
)) {
1022 printk(KERN_ERR
"ide-floppy: Can't get flexible disk page"
1026 floppy
->wp
= !!(pc
.buffer
[3] & 0x80);
1027 set_disk_ro(floppy
->disk
, floppy
->wp
);
1028 page
= &pc
.buffer
[8];
1030 transfer_rate
= be16_to_cpu(*(u16
*)&pc
.buffer
[8 + 2]);
1031 sector_size
= be16_to_cpu(*(u16
*)&pc
.buffer
[8 + 6]);
1032 cyls
= be16_to_cpu(*(u16
*)&pc
.buffer
[8 + 8]);
1033 rpm
= be16_to_cpu(*(u16
*)&pc
.buffer
[8 + 28]);
1034 heads
= pc
.buffer
[8 + 4];
1035 sectors
= pc
.buffer
[8 + 5];
1037 capacity
= cyls
* heads
* sectors
* sector_size
;
1039 if (memcmp(page
, &floppy
->flexible_disk_page
, 32))
1040 printk(KERN_INFO
"%s: %dkB, %d/%d/%d CHS, %d kBps, "
1041 "%d sector size, %d rpm\n",
1042 drive
->name
, capacity
/ 1024, cyls
, heads
,
1043 sectors
, transfer_rate
/ 8, sector_size
, rpm
);
1045 memcpy(&floppy
->flexible_disk_page
, page
, 32);
1046 drive
->bios_cyl
= cyls
;
1047 drive
->bios_head
= heads
;
1048 drive
->bios_sect
= sectors
;
1049 lba_capacity
= floppy
->blocks
* floppy
->block_size
;
1051 if (capacity
< lba_capacity
) {
1052 printk(KERN_NOTICE
"%s: The disk reports a capacity of %d "
1053 "bytes, but the drive only handles %d\n",
1054 drive
->name
, lba_capacity
, capacity
);
1055 floppy
->blocks
= floppy
->block_size
?
1056 capacity
/ floppy
->block_size
: 0;
1061 static int idefloppy_get_sfrp_bit(ide_drive_t
*drive
)
1063 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
1067 idefloppy_create_mode_sense_cmd(&pc
, IDEFLOPPY_CAPABILITIES_PAGE
,
1068 MODE_SENSE_CURRENT
);
1070 set_bit(PC_SUPPRESS_ERROR
, &pc
.flags
);
1071 if (idefloppy_queue_pc_tail(drive
, &pc
))
1074 floppy
->srfp
= pc
.buffer
[8 + 2] & 0x40;
1079 * Determine if a media is present in the floppy drive, and if so, its LBA
1082 static int ide_floppy_get_capacity(ide_drive_t
*drive
)
1084 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
1087 u8 header_len
, desc_cnt
;
1088 int i
, rc
= 1, blocks
, length
;
1090 drive
->bios_cyl
= 0;
1091 drive
->bios_head
= drive
->bios_sect
= 0;
1093 floppy
->bs_factor
= 1;
1094 set_capacity(floppy
->disk
, 0);
1096 idefloppy_create_read_capacity_cmd(&pc
);
1097 if (idefloppy_queue_pc_tail(drive
, &pc
)) {
1098 printk(KERN_ERR
"ide-floppy: Can't get floppy parameters\n");
1101 header_len
= pc
.buffer
[3];
1102 cap_desc
= &pc
.buffer
[4];
1103 desc_cnt
= header_len
/ 8; /* capacity descriptor of 8 bytes */
1105 for (i
= 0; i
< desc_cnt
; i
++) {
1106 unsigned int desc_start
= 4 + i
*8;
1108 blocks
= be32_to_cpu(*(u32
*)&pc
.buffer
[desc_start
]);
1109 length
= be16_to_cpu(*(u16
*)&pc
.buffer
[desc_start
+ 6]);
1111 debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
1112 i
, blocks
* length
/ 1024, blocks
, length
);
1117 * the code below is valid only for the 1st descriptor, ie i=0
1120 switch (pc
.buffer
[desc_start
+ 4] & 0x03) {
1121 /* Clik! drive returns this instead of CAPACITY_CURRENT */
1122 case CAPACITY_UNFORMATTED
:
1123 if (!test_bit(IDEFLOPPY_CLIK_DRIVE
, &floppy
->flags
))
1125 * If it is not a clik drive, break out
1126 * (maintains previous driver behaviour)
1129 case CAPACITY_CURRENT
:
1130 /* Normal Zip/LS-120 disks */
1131 if (memcmp(cap_desc
, &floppy
->cap_desc
, 8))
1132 printk(KERN_INFO
"%s: %dkB, %d blocks, %d "
1133 "sector size\n", drive
->name
,
1134 blocks
* length
/ 1024, blocks
, length
);
1135 memcpy(&floppy
->cap_desc
, cap_desc
, 8);
1137 if (!length
|| length
% 512) {
1138 printk(KERN_NOTICE
"%s: %d bytes block size "
1139 "not supported\n", drive
->name
, length
);
1141 floppy
->blocks
= blocks
;
1142 floppy
->block_size
= length
;
1143 floppy
->bs_factor
= length
/ 512;
1144 if (floppy
->bs_factor
!= 1)
1145 printk(KERN_NOTICE
"%s: warning: non "
1146 "512 bytes block size not "
1147 "fully supported\n",
1152 case CAPACITY_NO_CARTRIDGE
:
1154 * This is a KERN_ERR so it appears on screen
1155 * for the user to see
1157 printk(KERN_ERR
"%s: No disk in drive\n", drive
->name
);
1159 case CAPACITY_INVALID
:
1160 printk(KERN_ERR
"%s: Invalid capacity for disk "
1161 "in drive\n", drive
->name
);
1164 debug_log("Descriptor 0 Code: %d\n",
1165 pc
.buffer
[desc_start
+ 4] & 0x03);
1168 /* Clik! disk does not support get_flexible_disk_page */
1169 if (!test_bit(IDEFLOPPY_CLIK_DRIVE
, &floppy
->flags
))
1170 (void) ide_floppy_get_flexible_disk_page(drive
);
1172 set_capacity(floppy
->disk
, floppy
->blocks
* floppy
->bs_factor
);
1177 * Obtain the list of formattable capacities.
1178 * Very similar to ide_floppy_get_capacity, except that we push the capacity
1179 * descriptors to userland, instead of our own structures.
1181 * Userland gives us the following structure:
1183 * struct idefloppy_format_capacities {
1191 * userland initializes nformats to the number of allocated formats[] records.
1192 * On exit we set nformats to the number of records we've actually initialized.
1195 static int ide_floppy_get_format_capacities(ide_drive_t
*drive
, int __user
*arg
)
1198 u8 header_len
, desc_cnt
;
1199 int i
, blocks
, length
, u_array_size
, u_index
;
1202 if (get_user(u_array_size
, arg
))
1205 if (u_array_size
<= 0)
1208 idefloppy_create_read_capacity_cmd(&pc
);
1209 if (idefloppy_queue_pc_tail(drive
, &pc
)) {
1210 printk(KERN_ERR
"ide-floppy: Can't get floppy parameters\n");
1213 header_len
= pc
.buffer
[3];
1214 desc_cnt
= header_len
/ 8; /* capacity descriptor of 8 bytes */
1220 * We always skip the first capacity descriptor. That's the current
1221 * capacity. We are interested in the remaining descriptors, the
1222 * formattable capacities.
1224 for (i
= 1; i
< desc_cnt
; i
++) {
1225 unsigned int desc_start
= 4 + i
*8;
1227 if (u_index
>= u_array_size
)
1228 break; /* User-supplied buffer too small */
1230 blocks
= be32_to_cpu(*(u32
*)&pc
.buffer
[desc_start
]);
1231 length
= be16_to_cpu(*(u16
*)&pc
.buffer
[desc_start
+ 6]);
1233 if (put_user(blocks
, argp
))
1237 if (put_user(length
, argp
))
1244 if (put_user(u_index
, arg
))
1250 ** Get ATAPI_FORMAT_UNIT progress indication.
1252 ** Userland gives a pointer to an int. The int is set to a progress
1253 ** indicator 0-65536, with 65536=100%.
1255 ** If the drive does not support format progress indication, we just check
1256 ** the dsc bit, and return either 0 or 65536.
1259 static int idefloppy_get_format_progress(ide_drive_t
*drive
, int __user
*arg
)
1261 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
1263 int progress_indication
= 0x10000;
1266 idefloppy_create_request_sense_cmd(&pc
);
1267 if (idefloppy_queue_pc_tail(drive
, &pc
)) {
1271 if (floppy
->sense_key
== 2 &&
1273 floppy
->ascq
== 4) {
1274 progress_indication
= floppy
->progress_indication
;
1276 /* Else assume format_unit has finished, and we're
1279 unsigned long flags
;
1282 local_irq_save(flags
);
1283 stat
= drive
->hwif
->INB(IDE_STATUS_REG
);
1284 local_irq_restore(flags
);
1286 progress_indication
= ((stat
& SEEK_STAT
) == 0) ? 0 : 0x10000;
1288 if (put_user(progress_indication
, arg
))
1295 * Return the current floppy capacity.
1297 static sector_t
idefloppy_capacity (ide_drive_t
*drive
)
1299 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
1300 unsigned long capacity
= floppy
->blocks
* floppy
->bs_factor
;
1306 * idefloppy_identify_device checks if we can support a drive,
1307 * based on the ATAPI IDENTIFY command results.
1309 static int idefloppy_identify_device (ide_drive_t
*drive
,struct hd_driveid
*id
)
1311 struct idefloppy_id_gcw gcw
;
1312 #if IDEFLOPPY_DEBUG_INFO
1314 #endif /* IDEFLOPPY_DEBUG_INFO */
1316 *((u16
*) &gcw
) = id
->config
;
1319 /* kludge for Apple PowerBook internal zip */
1320 if ((gcw
.device_type
== 5) &&
1321 !strstr(id
->model
, "CD-ROM") &&
1322 strstr(id
->model
, "ZIP"))
1323 gcw
.device_type
= 0;
1326 #if IDEFLOPPY_DEBUG_INFO
1327 printk(KERN_INFO
"Dumping ATAPI Identify Device floppy parameters\n");
1328 switch (gcw
.protocol
) {
1329 case 0: case 1: sprintf(buffer
, "ATA");break;
1330 case 2: sprintf(buffer
, "ATAPI");break;
1331 case 3: sprintf(buffer
, "Reserved (Unknown to ide-floppy)");break;
1333 printk(KERN_INFO
"Protocol Type: %s\n", buffer
);
1334 switch (gcw
.device_type
) {
1335 case 0: sprintf(buffer
, "Direct-access Device");break;
1336 case 1: sprintf(buffer
, "Streaming Tape Device");break;
1337 case 2: case 3: case 4: sprintf (buffer
, "Reserved");break;
1338 case 5: sprintf(buffer
, "CD-ROM Device");break;
1339 case 6: sprintf(buffer
, "Reserved");
1340 case 7: sprintf(buffer
, "Optical memory Device");break;
1341 case 0x1f: sprintf(buffer
, "Unknown or no Device type");break;
1342 default: sprintf(buffer
, "Reserved");
1344 printk(KERN_INFO
"Device Type: %x - %s\n", gcw
.device_type
, buffer
);
1345 printk(KERN_INFO
"Removable: %s\n",gcw
.removable
? "Yes":"No");
1346 switch (gcw
.drq_type
) {
1347 case 0: sprintf(buffer
, "Microprocessor DRQ");break;
1348 case 1: sprintf(buffer
, "Interrupt DRQ");break;
1349 case 2: sprintf(buffer
, "Accelerated DRQ");break;
1350 case 3: sprintf(buffer
, "Reserved");break;
1352 printk(KERN_INFO
"Command Packet DRQ Type: %s\n", buffer
);
1353 switch (gcw
.packet_size
) {
1354 case 0: sprintf(buffer
, "12 bytes");break;
1355 case 1: sprintf(buffer
, "16 bytes");break;
1356 default: sprintf(buffer
, "Reserved");break;
1358 printk(KERN_INFO
"Command Packet Size: %s\n", buffer
);
1359 #endif /* IDEFLOPPY_DEBUG_INFO */
1361 if (gcw
.protocol
!= 2)
1362 printk(KERN_ERR
"ide-floppy: Protocol is not ATAPI\n");
1363 else if (gcw
.device_type
!= 0)
1364 printk(KERN_ERR
"ide-floppy: Device type is not set to floppy\n");
1365 else if (!gcw
.removable
)
1366 printk(KERN_ERR
"ide-floppy: The removable flag is not set\n");
1367 else if (gcw
.drq_type
== 3) {
1368 printk(KERN_ERR
"ide-floppy: Sorry, DRQ type %d not supported\n", gcw
.drq_type
);
1369 } else if (gcw
.packet_size
!= 0) {
1370 printk(KERN_ERR
"ide-floppy: Packet size is not 12 bytes long\n");
1376 #ifdef CONFIG_IDE_PROC_FS
1377 static void idefloppy_add_settings(ide_drive_t
*drive
)
1379 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
1382 * drive setting name read/write data type min max mul_factor div_factor data pointer set function
1384 ide_add_setting(drive
, "bios_cyl", SETTING_RW
, TYPE_INT
, 0, 1023, 1, 1, &drive
->bios_cyl
, NULL
);
1385 ide_add_setting(drive
, "bios_head", SETTING_RW
, TYPE_BYTE
, 0, 255, 1, 1, &drive
->bios_head
, NULL
);
1386 ide_add_setting(drive
, "bios_sect", SETTING_RW
, TYPE_BYTE
, 0, 63, 1, 1, &drive
->bios_sect
, NULL
);
1387 ide_add_setting(drive
, "ticks", SETTING_RW
, TYPE_BYTE
, 0, 255, 1, 1, &floppy
->ticks
, NULL
);
1390 static inline void idefloppy_add_settings(ide_drive_t
*drive
) { ; }
1394 * Driver initialization.
1396 static void idefloppy_setup (ide_drive_t
*drive
, idefloppy_floppy_t
*floppy
)
1398 struct idefloppy_id_gcw gcw
;
1400 *((u16
*) &gcw
) = drive
->id
->config
;
1401 floppy
->pc
= floppy
->pc_stack
;
1402 if (gcw
.drq_type
== 1)
1403 set_bit(IDEFLOPPY_DRQ_INTERRUPT
, &floppy
->flags
);
1405 * We used to check revisions here. At this point however
1406 * I'm giving up. Just assume they are all broken, its easier.
1408 * The actual reason for the workarounds was likely
1409 * a driver bug after all rather than a firmware bug,
1410 * and the workaround below used to hide it. It should
1411 * be fixed as of version 1.9, but to be on the safe side
1412 * we'll leave the limitation below for the 2.2.x tree.
1415 if (!strncmp(drive
->id
->model
, "IOMEGA ZIP 100 ATAPI", 20)) {
1416 set_bit(IDEFLOPPY_ZIP_DRIVE
, &floppy
->flags
);
1417 /* This value will be visible in the /proc/ide/hdx/settings */
1418 floppy
->ticks
= IDEFLOPPY_TICKS_DELAY
;
1419 blk_queue_max_sectors(drive
->queue
, 64);
1423 * Guess what? The IOMEGA Clik! drive also needs the
1424 * above fix. It makes nasty clicking noises without
1425 * it, so please don't remove this.
1427 if (strncmp(drive
->id
->model
, "IOMEGA Clik!", 11) == 0) {
1428 blk_queue_max_sectors(drive
->queue
, 64);
1429 set_bit(IDEFLOPPY_CLIK_DRIVE
, &floppy
->flags
);
1433 (void) ide_floppy_get_capacity(drive
);
1434 idefloppy_add_settings(drive
);
1437 static void ide_floppy_remove(ide_drive_t
*drive
)
1439 idefloppy_floppy_t
*floppy
= drive
->driver_data
;
1440 struct gendisk
*g
= floppy
->disk
;
1442 ide_proc_unregister_driver(drive
, floppy
->driver
);
1446 ide_floppy_put(floppy
);
1449 static void idefloppy_cleanup_obj(struct kref
*kref
)
1451 struct ide_floppy_obj
*floppy
= to_ide_floppy(kref
);
1452 ide_drive_t
*drive
= floppy
->drive
;
1453 struct gendisk
*g
= floppy
->disk
;
1455 drive
->driver_data
= NULL
;
1456 g
->private_data
= NULL
;
1461 #ifdef CONFIG_IDE_PROC_FS
1462 static int proc_idefloppy_read_capacity
1463 (char *page
, char **start
, off_t off
, int count
, int *eof
, void *data
)
1465 ide_drive_t
*drive
= (ide_drive_t
*)data
;
1468 len
= sprintf(page
,"%llu\n", (long long)idefloppy_capacity(drive
));
1469 PROC_IDE_READ_RETURN(page
,start
,off
,count
,eof
,len
);
1472 static ide_proc_entry_t idefloppy_proc
[] = {
1473 { "capacity", S_IFREG
|S_IRUGO
, proc_idefloppy_read_capacity
, NULL
},
1474 { "geometry", S_IFREG
|S_IRUGO
, proc_ide_read_geometry
, NULL
},
1475 { NULL
, 0, NULL
, NULL
}
1477 #endif /* CONFIG_IDE_PROC_FS */
1479 static int ide_floppy_probe(ide_drive_t
*);
1481 static ide_driver_t idefloppy_driver
= {
1483 .owner
= THIS_MODULE
,
1484 .name
= "ide-floppy",
1485 .bus
= &ide_bus_type
,
1487 .probe
= ide_floppy_probe
,
1488 .remove
= ide_floppy_remove
,
1489 .version
= IDEFLOPPY_VERSION
,
1490 .media
= ide_floppy
,
1491 .supports_dsc_overlap
= 0,
1492 .do_request
= idefloppy_do_request
,
1493 .end_request
= idefloppy_do_end_request
,
1494 .error
= __ide_error
,
1495 .abort
= __ide_abort
,
1496 #ifdef CONFIG_IDE_PROC_FS
1497 .proc
= idefloppy_proc
,
1501 static int idefloppy_open(struct inode
*inode
, struct file
*filp
)
1503 struct gendisk
*disk
= inode
->i_bdev
->bd_disk
;
1504 struct ide_floppy_obj
*floppy
;
1509 debug_log("Reached %s\n", __func__
);
1511 if (!(floppy
= ide_floppy_get(disk
)))
1514 drive
= floppy
->drive
;
1518 if (floppy
->openers
== 1) {
1519 clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS
, &floppy
->flags
);
1522 idefloppy_create_test_unit_ready_cmd(&pc
);
1523 if (idefloppy_queue_pc_tail(drive
, &pc
)) {
1524 idefloppy_create_start_stop_cmd(&pc
, 1);
1525 (void) idefloppy_queue_pc_tail(drive
, &pc
);
1528 if (ide_floppy_get_capacity(drive
)
1529 && (filp
->f_flags
& O_NDELAY
) == 0
1531 ** Allow O_NDELAY to open a drive without a disk, or with
1532 ** an unreadable disk, so that we can get the format
1533 ** capacity of the drive or begin the format - Sam
1537 goto out_put_floppy
;
1540 if (floppy
->wp
&& (filp
->f_mode
& 2)) {
1542 goto out_put_floppy
;
1544 set_bit(IDEFLOPPY_MEDIA_CHANGED
, &floppy
->flags
);
1545 /* IOMEGA Clik! drives do not support lock/unlock commands */
1546 if (!test_bit(IDEFLOPPY_CLIK_DRIVE
, &floppy
->flags
)) {
1547 idefloppy_create_prevent_cmd(&pc
, 1);
1548 (void) idefloppy_queue_pc_tail(drive
, &pc
);
1550 check_disk_change(inode
->i_bdev
);
1551 } else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS
, &floppy
->flags
)) {
1553 goto out_put_floppy
;
1559 ide_floppy_put(floppy
);
1563 static int idefloppy_release(struct inode
*inode
, struct file
*filp
)
1565 struct gendisk
*disk
= inode
->i_bdev
->bd_disk
;
1566 struct ide_floppy_obj
*floppy
= ide_floppy_g(disk
);
1567 ide_drive_t
*drive
= floppy
->drive
;
1570 debug_log("Reached %s\n", __func__
);
1572 if (floppy
->openers
== 1) {
1573 /* IOMEGA Clik! drives do not support lock/unlock commands */
1574 if (!test_bit(IDEFLOPPY_CLIK_DRIVE
, &floppy
->flags
)) {
1575 idefloppy_create_prevent_cmd(&pc
, 0);
1576 (void) idefloppy_queue_pc_tail(drive
, &pc
);
1579 clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS
, &floppy
->flags
);
1584 ide_floppy_put(floppy
);
1589 static int idefloppy_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
1591 struct ide_floppy_obj
*floppy
= ide_floppy_g(bdev
->bd_disk
);
1592 ide_drive_t
*drive
= floppy
->drive
;
1594 geo
->heads
= drive
->bios_head
;
1595 geo
->sectors
= drive
->bios_sect
;
1596 geo
->cylinders
= (u16
)drive
->bios_cyl
; /* truncate */
1600 static int ide_floppy_lockdoor(idefloppy_floppy_t
*floppy
, idefloppy_pc_t
*pc
,
1601 unsigned long arg
, unsigned int cmd
)
1603 if (floppy
->openers
> 1)
1606 /* The IOMEGA Clik! Drive doesn't support this command -
1607 * no room for an eject mechanism */
1608 if (!test_bit(IDEFLOPPY_CLIK_DRIVE
, &floppy
->flags
)) {
1609 int prevent
= arg
? 1 : 0;
1611 if (cmd
== CDROMEJECT
)
1614 idefloppy_create_prevent_cmd(pc
, prevent
);
1615 (void) idefloppy_queue_pc_tail(floppy
->drive
, pc
);
1618 if (cmd
== CDROMEJECT
) {
1619 idefloppy_create_start_stop_cmd(pc
, 2);
1620 (void) idefloppy_queue_pc_tail(floppy
->drive
, pc
);
1626 static int ide_floppy_format_unit(idefloppy_floppy_t
*floppy
,
1629 int blocks
, length
, flags
, err
= 0;
1632 if (floppy
->openers
> 1) {
1633 /* Don't format if someone is using the disk */
1634 clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS
, &floppy
->flags
);
1638 set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS
, &floppy
->flags
);
1641 * Send ATAPI_FORMAT_UNIT to the drive.
1643 * Userland gives us the following structure:
1645 * struct idefloppy_format_command {
1651 * flags is a bitmask, currently, the only defined flag is:
1653 * 0x01 - verify media after format.
1655 if (get_user(blocks
, arg
) ||
1656 get_user(length
, arg
+1) ||
1657 get_user(flags
, arg
+2)) {
1662 (void) idefloppy_get_sfrp_bit(floppy
->drive
);
1663 idefloppy_create_format_unit_cmd(&pc
, blocks
, length
, flags
);
1665 if (idefloppy_queue_pc_tail(floppy
->drive
, &pc
))
1670 clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS
, &floppy
->flags
);
1675 static int idefloppy_ioctl(struct inode
*inode
, struct file
*file
,
1676 unsigned int cmd
, unsigned long arg
)
1678 struct block_device
*bdev
= inode
->i_bdev
;
1679 struct ide_floppy_obj
*floppy
= ide_floppy_g(bdev
->bd_disk
);
1680 ide_drive_t
*drive
= floppy
->drive
;
1682 void __user
*argp
= (void __user
*)arg
;
1688 case CDROM_LOCKDOOR
:
1689 return ide_floppy_lockdoor(floppy
, &pc
, arg
, cmd
);
1690 case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED
:
1692 case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY
:
1693 return ide_floppy_get_format_capacities(drive
, argp
);
1694 case IDEFLOPPY_IOCTL_FORMAT_START
:
1695 if (!(file
->f_mode
& 2))
1698 return ide_floppy_format_unit(floppy
, (int __user
*)arg
);
1699 case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS
:
1700 return idefloppy_get_format_progress(drive
, argp
);
1704 * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
1705 * and CDROM_SEND_PACKET (legacy) ioctls
1707 if (cmd
!= CDROM_SEND_PACKET
&& cmd
!= SCSI_IOCTL_SEND_COMMAND
)
1708 err
= scsi_cmd_ioctl(file
, bdev
->bd_disk
->queue
,
1709 bdev
->bd_disk
, cmd
, argp
);
1714 err
= generic_ide_ioctl(drive
, file
, bdev
, cmd
, arg
);
1719 static int idefloppy_media_changed(struct gendisk
*disk
)
1721 struct ide_floppy_obj
*floppy
= ide_floppy_g(disk
);
1722 ide_drive_t
*drive
= floppy
->drive
;
1724 /* do not scan partitions twice if this is a removable device */
1725 if (drive
->attach
) {
1729 return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED
, &floppy
->flags
);
1732 static int idefloppy_revalidate_disk(struct gendisk
*disk
)
1734 struct ide_floppy_obj
*floppy
= ide_floppy_g(disk
);
1735 set_capacity(disk
, idefloppy_capacity(floppy
->drive
));
1739 static struct block_device_operations idefloppy_ops
= {
1740 .owner
= THIS_MODULE
,
1741 .open
= idefloppy_open
,
1742 .release
= idefloppy_release
,
1743 .ioctl
= idefloppy_ioctl
,
1744 .getgeo
= idefloppy_getgeo
,
1745 .media_changed
= idefloppy_media_changed
,
1746 .revalidate_disk
= idefloppy_revalidate_disk
1749 static int ide_floppy_probe(ide_drive_t
*drive
)
1751 idefloppy_floppy_t
*floppy
;
1754 if (!strstr("ide-floppy", drive
->driver_req
))
1756 if (!drive
->present
)
1758 if (drive
->media
!= ide_floppy
)
1760 if (!idefloppy_identify_device (drive
, drive
->id
)) {
1761 printk (KERN_ERR
"ide-floppy: %s: not supported by this version of ide-floppy\n", drive
->name
);
1765 printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive
->name
);
1768 if ((floppy
= kzalloc(sizeof (idefloppy_floppy_t
), GFP_KERNEL
)) == NULL
) {
1769 printk (KERN_ERR
"ide-floppy: %s: Can't allocate a floppy structure\n", drive
->name
);
1773 g
= alloc_disk(1 << PARTN_BITS
);
1775 goto out_free_floppy
;
1777 ide_init_disk(g
, drive
);
1779 ide_proc_register_driver(drive
, &idefloppy_driver
);
1781 kref_init(&floppy
->kref
);
1783 floppy
->drive
= drive
;
1784 floppy
->driver
= &idefloppy_driver
;
1787 g
->private_data
= &floppy
->driver
;
1789 drive
->driver_data
= floppy
;
1791 idefloppy_setup (drive
, floppy
);
1793 g
->minors
= 1 << PARTN_BITS
;
1794 g
->driverfs_dev
= &drive
->gendev
;
1795 g
->flags
= drive
->removable
? GENHD_FL_REMOVABLE
: 0;
1796 g
->fops
= &idefloppy_ops
;
1807 MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
1809 static void __exit
idefloppy_exit (void)
1811 driver_unregister(&idefloppy_driver
.gen_driver
);
1814 static int __init
idefloppy_init(void)
1816 printk("ide-floppy driver " IDEFLOPPY_VERSION
"\n");
1817 return driver_register(&idefloppy_driver
.gen_driver
);
1820 MODULE_ALIAS("ide:*m-floppy*");
1821 module_init(idefloppy_init
);
1822 module_exit(idefloppy_exit
);
1823 MODULE_LICENSE("GPL");