2 * linux/arch/arm/mach-mmp/jasper.c
4 * Support for the Marvell Jasper Development Platform.
6 * Copyright (C) 2009-2010 Marvell International Ltd.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * publishhed by the Free Software Foundation.
13 #include <linux/init.h>
14 #include <linux/kernel.h>
15 #include <linux/platform_device.h>
17 #include <linux/gpio.h>
18 #include <linux/regulator/machine.h>
19 #include <linux/regulator/max8649.h>
20 #include <linux/mfd/max8925.h>
22 #include <asm/mach-types.h>
23 #include <asm/mach/arch.h>
24 #include <mach/addr-map.h>
25 #include <mach/mfp-mmp2.h>
26 #include <mach/mmp2.h>
27 #include <mach/irqs.h>
31 static unsigned long jasper_pin_config
[] __initdata
= {
67 PMIC_PMIC_INT
| MFP_LPM_EDGE_FALL
,
70 static struct regulator_consumer_supply max8649_supply
[] = {
71 REGULATOR_SUPPLY("vcc_core", NULL
),
74 static struct regulator_init_data max8649_init_data
= {
76 .name
= "vcc_core range",
81 .valid_ops_mask
= REGULATOR_CHANGE_VOLTAGE
,
83 .num_consumer_supplies
= 1,
84 .consumer_supplies
= &max8649_supply
[0],
87 static struct max8649_platform_data jasper_max8649_info
= {
88 .mode
= 2, /* VID1 = 1, VID0 = 0 */
90 .ramp_timing
= MAX8649_RAMP_32MV
,
91 .regulator
= &max8649_init_data
,
94 static struct max8925_backlight_pdata jasper_backlight_data
= {
98 static struct max8925_power_pdata jasper_power_data
= {
99 .batt_detect
= 0, /* can't detect battery by ID pin */
100 .topoff_threshold
= MAX8925_TOPOFF_THR_10PER
,
101 .fast_charge
= MAX8925_FCHG_1000MA
,
104 static struct max8925_platform_data jasper_max8925_info
= {
105 .backlight
= &jasper_backlight_data
,
106 .power
= &jasper_power_data
,
107 .irq_base
= IRQ_BOARD_START
,
110 static struct i2c_board_info jasper_twsi1_info
[] = {
114 .platform_data
= &jasper_max8649_info
,
119 .irq
= IRQ_MMP2_PMIC
,
120 .platform_data
= &jasper_max8925_info
,
124 static void __init
jasper_init(void)
126 mfp_config(ARRAY_AND_SIZE(jasper_pin_config
));
128 /* on-chip devices */
131 mmp2_add_twsi(1, NULL
, ARRAY_AND_SIZE(jasper_twsi1_info
));
133 regulator_has_full_constraints();
136 MACHINE_START(MARVELL_JASPER
, "Jasper Development Platform")
137 .phys_io
= APB_PHYS_BASE
,
138 .boot_params
= 0x00000100,
139 .io_pg_offst
= (APB_VIRT_BASE
>> 18) & 0xfffc,
140 .map_io
= pxa_map_io
,
141 .init_irq
= mmp2_init_irq
,
142 .timer
= &mmp2_timer
,
143 .init_machine
= jasper_init
,