drivers/usb/host/xhci-pci.c

   1 /*
   2  * xHCI host controller driver PCI Bus Glue.
   3  *
   4  * Copyright (C) 2008 Intel Corp.
   5  *
   6  * Author: Sarah Sharp
   7  * Some code borrowed from the Linux EHCI driver.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16  * for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software Foundation,
  20  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/pci.h>
  24
  25 #include "xhci.h"
  26
  27 /* Device for a quirk */
  28 #define PCI_VENDOR_ID_FRESCO_LOGIC      0x1b73
  29 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK  0x1000
  30
  31 static const char hcd_name[] = "xhci_hcd";
  32
  33 /* called after powerup, by probe or system-pm "wakeup" */
  34 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
  35 {
  36         /*
  37          * TODO: Implement finding debug ports later.
  38          * TODO: see if there are any quirks that need to be added to handle
  39          * new extended capabilities.
  40          */
  41
  42         /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
  43         if (!pci_set_mwi(pdev))
  44                 xhci_dbg(xhci, "MWI active\n");
  45
  46         xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
  47         return 0;
  48 }
  49
  50 /* called during probe() after chip reset completes */
  51 static int xhci_pci_setup(struct usb_hcd *hcd)
  52 {
  53         struct xhci_hcd         *xhci = hcd_to_xhci(hcd);
  54         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
  55         int                     retval;
  56
  57         xhci->cap_regs = hcd->regs;
  58         xhci->op_regs = hcd->regs +
  59                 HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
  60         xhci->run_regs = hcd->regs +
  61                 (xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
  62         /* Cache read-only capability registers */
  63         xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
  64         xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
  65         xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
  66         xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
  67         xhci_print_registers(xhci);
  68
  69         /* Look for vendor-specific quirks */
  70         if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
  71                         pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
  72                         pdev->revision == 0x0) {
  73                         xhci->quirks |= XHCI_RESET_EP_QUIRK;
  74                         xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
  75                                         " endpoint cmd after reset endpoint\n");
  76         }
  77
  78         /* Make sure the HC is halted. */
  79         retval = xhci_halt(xhci);
  80         if (retval)
  81                 return retval;
  82
  83         xhci_dbg(xhci, "Resetting HCD\n");
  84         /* Reset the internal HC memory state and registers. */
  85         retval = xhci_reset(xhci);
  86         if (retval)
  87                 return retval;
  88         xhci_dbg(xhci, "Reset complete\n");
  89
  90         xhci_dbg(xhci, "Calling HCD init\n");
  91         /* Initialize HCD and host controller data structures. */
  92         retval = xhci_init(hcd);
  93         if (retval)
  94                 return retval;
  95         xhci_dbg(xhci, "Called HCD init\n");
  96
  97         pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
  98         xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
  99
 100         /* Find any debug ports */
 101         return xhci_pci_reinit(xhci, pdev);
 102 }
 103
 104 static const struct hc_driver xhci_pci_hc_driver = {
 105         .description =          hcd_name,
 106         .product_desc =         "xHCI Host Controller",
 107         .hcd_priv_size =        sizeof(struct xhci_hcd),
 108
 109         /*
 110          * generic hardware linkage
 111          */
 112         .irq =                  xhci_irq,
 113         .flags =                HCD_MEMORY | HCD_USB3,
 114
 115         /*
 116          * basic lifecycle operations
 117          */
 118         .reset =                xhci_pci_setup,
 119         .start =                xhci_run,
 120         /* suspend and resume implemented later */
 121         .stop =                 xhci_stop,
 122         .shutdown =             xhci_shutdown,
 123
 124         /*
 125          * managing i/o requests and associated device resources
 126          */
 127         .urb_enqueue =          xhci_urb_enqueue,
 128         .urb_dequeue =          xhci_urb_dequeue,
 129         .alloc_dev =            xhci_alloc_dev,
 130         .free_dev =             xhci_free_dev,
 131         .add_endpoint =         xhci_add_endpoint,
 132         .drop_endpoint =        xhci_drop_endpoint,
 133         .endpoint_reset =       xhci_endpoint_reset,
 134         .check_bandwidth =      xhci_check_bandwidth,
 135         .reset_bandwidth =      xhci_reset_bandwidth,
 136         .address_device =       xhci_address_device,
 137
 138         /*
 139          * scheduling support
 140          */
 141         .get_frame_number =     xhci_get_frame,
 142
 143         /* Root hub support */
 144         .hub_control =          xhci_hub_control,
 145         .hub_status_data =      xhci_hub_status_data,
 146 };
 147
 148 /*-------------------------------------------------------------------------*/
 149
 150 /* PCI driver selection metadata; PCI hotplugging uses this */
 151 static const struct pci_device_id pci_ids[] = { {
 152         /* handle any USB 3.0 xHCI controller */
 153         PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
 154         .driver_data =  (unsigned long) &xhci_pci_hc_driver,
 155         },
 156         { /* end: all zeroes */ }
 157 };
 158 MODULE_DEVICE_TABLE(pci, pci_ids);
 159
 160 /* pci driver glue; this is a "new style" PCI driver module */
 161 static struct pci_driver xhci_pci_driver = {
 162         .name =         (char *) hcd_name,
 163         .id_table =     pci_ids,
 164
 165         .probe =        usb_hcd_pci_probe,
 166         .remove =       usb_hcd_pci_remove,
 167         /* suspend and resume implemented later */
 168
 169         .shutdown =     usb_hcd_pci_shutdown,
 170 };
 171
 172 int xhci_register_pci()
 173 {
 174         return pci_register_driver(&xhci_pci_driver);
 175 }
 176
 177 void xhci_unregister_pci()
 178 {
 179         pci_unregister_driver(&xhci_pci_driver);
 180 }