[PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversions
[linux-2.6.git] / arch / ia64 / sn / kernel / xpnet.c
blobe5c6d3c0a8e9a852ac37ae43e620ffa820bc0b05
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
7 */
11 * Cross Partition Network Interface (XPNET) support
13 * XPNET provides a virtual network layered on top of the Cross
14 * Partition communication layer.
16 * XPNET provides direct point-to-point and broadcast-like support
17 * for an ethernet-like device. The ethernet broadcast medium is
18 * replaced with a point-to-point message structure which passes
19 * pointers to a DMA-capable block that a remote partition should
20 * retrieve and pass to the upper level networking layer.
25 #include <linux/config.h>
26 #include <linux/module.h>
27 #include <linux/kernel.h>
28 #include <linux/pci.h>
29 #include <linux/init.h>
30 #include <linux/ioport.h>
31 #include <linux/netdevice.h>
32 #include <linux/etherdevice.h>
33 #include <linux/delay.h>
34 #include <linux/ethtool.h>
35 #include <linux/mii.h>
36 #include <linux/smp.h>
37 #include <linux/string.h>
38 #include <asm/sn/bte.h>
39 #include <asm/sn/io.h>
40 #include <asm/sn/sn_sal.h>
41 #include <asm/types.h>
42 #include <asm/atomic.h>
43 #include <asm/sn/xp.h>
47 * The message payload transferred by XPC.
49 * buf_pa is the physical address where the DMA should pull from.
51 * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a
52 * cacheline boundary. To accomplish this, we record the number of
53 * bytes from the beginning of the first cacheline to the first useful
54 * byte of the skb (leadin_ignore) and the number of bytes from the
55 * last useful byte of the skb to the end of the last cacheline
56 * (tailout_ignore).
58 * size is the number of bytes to transfer which includes the skb->len
59 * (useful bytes of the senders skb) plus the leadin and tailout
61 struct xpnet_message {
62 u16 version; /* Version for this message */
63 u16 embedded_bytes; /* #of bytes embedded in XPC message */
64 u32 magic; /* Special number indicating this is xpnet */
65 u64 buf_pa; /* phys address of buffer to retrieve */
66 u32 size; /* #of bytes in buffer */
67 u8 leadin_ignore; /* #of bytes to ignore at the beginning */
68 u8 tailout_ignore; /* #of bytes to ignore at the end */
69 unsigned char data; /* body of small packets */
73 * Determine the size of our message, the cacheline aligned size,
74 * and then the number of message will request from XPC.
76 * XPC expects each message to exist in an individual cacheline.
78 #define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
79 #define XPNET_MSG_DATA_MAX \
80 (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
81 #define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE))
82 #define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
85 #define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1)
86 #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1)
89 * Version number of XPNET implementation. XPNET can always talk to versions
90 * with same major #, and never talk to versions with a different version.
92 #define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor))
93 #define XPNET_VERSION_MAJOR(_v) ((_v) >> 4)
94 #define XPNET_VERSION_MINOR(_v) ((_v) & 0xf)
96 #define XPNET_VERSION _XPNET_VERSION(1,0) /* version 1.0 */
97 #define XPNET_VERSION_EMBED _XPNET_VERSION(1,1) /* version 1.1 */
98 #define XPNET_MAGIC 0x88786984 /* "XNET" */
100 #define XPNET_VALID_MSG(_m) \
101 ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \
102 && (msg->magic == XPNET_MAGIC))
104 #define XPNET_DEVICE_NAME "xp0"
108 * When messages are queued with xpc_send_notify, a kmalloc'd buffer
109 * of the following type is passed as a notification cookie. When the
110 * notification function is called, we use the cookie to decide
111 * whether all outstanding message sends have completed. The skb can
112 * then be released.
114 struct xpnet_pending_msg {
115 struct list_head free_list;
116 struct sk_buff *skb;
117 atomic_t use_count;
120 /* driver specific structure pointed to by the device structure */
121 struct xpnet_dev_private {
122 struct net_device_stats stats;
125 struct net_device *xpnet_device;
128 * When we are notified of other partitions activating, we add them to
129 * our bitmask of partitions to which we broadcast.
131 static u64 xpnet_broadcast_partitions;
132 /* protect above */
133 static DEFINE_SPINLOCK(xpnet_broadcast_lock);
136 * Since the Block Transfer Engine (BTE) is being used for the transfer
137 * and it relies upon cache-line size transfers, we need to reserve at
138 * least one cache-line for head and tail alignment. The BTE is
139 * limited to 8MB transfers.
141 * Testing has shown that changing MTU to greater than 64KB has no effect
142 * on TCP as the two sides negotiate a Max Segment Size that is limited
143 * to 64K. Other protocols May use packets greater than this, but for
144 * now, the default is 64KB.
146 #define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES)
147 /* 32KB has been determined to be the ideal */
148 #define XPNET_DEF_MTU (0x8000UL)
152 * The partition id is encapsulated in the MAC address. The following
153 * define locates the octet the partid is in.
155 #define XPNET_PARTID_OCTET 1
156 #define XPNET_LICENSE_OCTET 2
160 * Define the XPNET debug device structure that is to be used with dev_dbg(),
161 * dev_err(), dev_warn(), and dev_info().
163 struct device_driver xpnet_dbg_name = {
164 .name = "xpnet"
167 struct device xpnet_dbg_subname = {
168 .bus_id = {0}, /* set to "" */
169 .driver = &xpnet_dbg_name
172 struct device *xpnet = &xpnet_dbg_subname;
175 * Packet was recevied by XPC and forwarded to us.
177 static void
178 xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
180 struct sk_buff *skb;
181 bte_result_t bret;
182 struct xpnet_dev_private *priv =
183 (struct xpnet_dev_private *) xpnet_device->priv;
186 if (!XPNET_VALID_MSG(msg)) {
188 * Packet with a different XPC version. Ignore.
190 xpc_received(partid, channel, (void *) msg);
192 priv->stats.rx_errors++;
194 return;
196 dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size,
197 msg->leadin_ignore, msg->tailout_ignore);
200 /* reserve an extra cache line */
201 skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES);
202 if (!skb) {
203 dev_err(xpnet, "failed on dev_alloc_skb(%d)\n",
204 msg->size + L1_CACHE_BYTES);
206 xpc_received(partid, channel, (void *) msg);
208 priv->stats.rx_errors++;
210 return;
214 * The allocated skb has some reserved space.
215 * In order to use bte_copy, we need to get the
216 * skb->data pointer moved forward.
218 skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
219 (L1_CACHE_BYTES - 1)) +
220 msg->leadin_ignore));
223 * Update the tail pointer to indicate data actually
224 * transferred.
226 skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore));
229 * Move the data over from the the other side.
231 if ((XPNET_VERSION_MINOR(msg->version) == 1) &&
232 (msg->embedded_bytes != 0)) {
233 dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, "
234 "%lu)\n", skb->data, &msg->data,
235 (size_t) msg->embedded_bytes);
237 memcpy(skb->data, &msg->data, (size_t) msg->embedded_bytes);
238 } else {
239 dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
240 "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
241 (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
242 msg->size);
244 bret = bte_copy(msg->buf_pa,
245 __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
246 msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
248 if (bret != BTE_SUCCESS) {
249 // >>> Need better way of cleaning skb. Currently skb
250 // >>> appears in_use and we can't just call
251 // >>> dev_kfree_skb.
252 dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
253 "error=0x%x\n", (void *)msg->buf_pa,
254 (void *)__pa((u64)skb->data &
255 ~(L1_CACHE_BYTES - 1)),
256 msg->size, bret);
258 xpc_received(partid, channel, (void *) msg);
260 priv->stats.rx_errors++;
262 return;
266 dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
267 "skb->end=0x%p skb->len=%d\n", (void *) skb->head,
268 (void *) skb->data, (void *) skb->tail, (void *) skb->end,
269 skb->len);
271 skb->dev = xpnet_device;
272 skb->protocol = eth_type_trans(skb, xpnet_device);
273 skb->ip_summed = CHECKSUM_UNNECESSARY;
275 dev_dbg(xpnet, "passing skb to network layer; \n\tskb->head=0x%p "
276 "skb->data=0x%p skb->tail=0x%p skb->end=0x%p skb->len=%d\n",
277 (void *) skb->head, (void *) skb->data, (void *) skb->tail,
278 (void *) skb->end, skb->len);
281 xpnet_device->last_rx = jiffies;
282 priv->stats.rx_packets++;
283 priv->stats.rx_bytes += skb->len + ETH_HLEN;
285 netif_rx_ni(skb);
286 xpc_received(partid, channel, (void *) msg);
291 * This is the handler which XPC calls during any sort of change in
292 * state or message reception on a connection.
294 static void
295 xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel,
296 void *data, void *key)
298 long bp;
301 DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
302 DBUG_ON(channel != XPC_NET_CHANNEL);
304 switch(reason) {
305 case xpcMsgReceived: /* message received */
306 DBUG_ON(data == NULL);
308 xpnet_receive(partid, channel, (struct xpnet_message *) data);
309 break;
311 case xpcConnected: /* connection completed to a partition */
312 spin_lock_bh(&xpnet_broadcast_lock);
313 xpnet_broadcast_partitions |= 1UL << (partid -1 );
314 bp = xpnet_broadcast_partitions;
315 spin_unlock_bh(&xpnet_broadcast_lock);
317 netif_carrier_on(xpnet_device);
319 dev_dbg(xpnet, "%s connection created to partition %d; "
320 "xpnet_broadcast_partitions=0x%lx\n",
321 xpnet_device->name, partid, bp);
322 break;
324 default:
325 spin_lock_bh(&xpnet_broadcast_lock);
326 xpnet_broadcast_partitions &= ~(1UL << (partid -1 ));
327 bp = xpnet_broadcast_partitions;
328 spin_unlock_bh(&xpnet_broadcast_lock);
330 if (bp == 0) {
331 netif_carrier_off(xpnet_device);
334 dev_dbg(xpnet, "%s disconnected from partition %d; "
335 "xpnet_broadcast_partitions=0x%lx\n",
336 xpnet_device->name, partid, bp);
337 break;
343 static int
344 xpnet_dev_open(struct net_device *dev)
346 enum xpc_retval ret;
349 dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %d, "
350 "%d)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
351 XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
352 XPNET_MAX_IDLE_KTHREADS);
354 ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
355 XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
356 XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
357 if (ret != xpcSuccess) {
358 dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
359 "ret=%d\n", dev->name, ret);
361 return -ENOMEM;
364 dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name);
366 return 0;
370 static int
371 xpnet_dev_stop(struct net_device *dev)
373 xpc_disconnect(XPC_NET_CHANNEL);
375 dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name);
377 return 0;
381 static int
382 xpnet_dev_change_mtu(struct net_device *dev, int new_mtu)
384 /* 68 comes from min TCP+IP+MAC header */
385 if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) {
386 dev_err(xpnet, "ifconfig %s mtu %d failed; value must be "
387 "between 68 and %ld\n", dev->name, new_mtu,
388 XPNET_MAX_MTU);
389 return -EINVAL;
392 dev->mtu = new_mtu;
393 dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu);
394 return 0;
399 * Required for the net_device structure.
401 static int
402 xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map)
404 return 0;
409 * Return statistics to the caller.
411 static struct net_device_stats *
412 xpnet_dev_get_stats(struct net_device *dev)
414 struct xpnet_dev_private *priv;
417 priv = (struct xpnet_dev_private *) dev->priv;
419 return &priv->stats;
424 * Notification that the other end has received the message and
425 * DMA'd the skb information. At this point, they are done with
426 * our side. When all recipients are done processing, we
427 * release the skb and then release our pending message structure.
429 static void
430 xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel,
431 void *__qm)
433 struct xpnet_pending_msg *queued_msg =
434 (struct xpnet_pending_msg *) __qm;
437 DBUG_ON(queued_msg == NULL);
439 dev_dbg(xpnet, "message to %d notified with reason %d\n",
440 partid, reason);
442 if (atomic_dec_return(&queued_msg->use_count) == 0) {
443 dev_dbg(xpnet, "all acks for skb->head=-x%p\n",
444 (void *) queued_msg->skb->head);
446 dev_kfree_skb_any(queued_msg->skb);
447 kfree(queued_msg);
453 * Network layer has formatted a packet (skb) and is ready to place it
454 * "on the wire". Prepare and send an xpnet_message to all partitions
455 * which have connected with us and are targets of this packet.
457 * MAC-NOTE: For the XPNET driver, the MAC address contains the
458 * destination partition_id. If the destination partition id word
459 * is 0xff, this packet is to broadcast to all partitions.
461 static int
462 xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
464 struct xpnet_pending_msg *queued_msg;
465 enum xpc_retval ret;
466 struct xpnet_message *msg;
467 u64 start_addr, end_addr;
468 long dp;
469 u8 second_mac_octet;
470 partid_t dest_partid;
471 struct xpnet_dev_private *priv;
472 u16 embedded_bytes;
475 priv = (struct xpnet_dev_private *) dev->priv;
478 dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
479 "skb->end=0x%p skb->len=%d\n", (void *) skb->head,
480 (void *) skb->data, (void *) skb->tail, (void *) skb->end,
481 skb->len);
485 * The xpnet_pending_msg tracks how many outstanding
486 * xpc_send_notifies are relying on this skb. When none
487 * remain, release the skb.
489 queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC);
490 if (queued_msg == NULL) {
491 dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping "
492 "packet\n", sizeof(struct xpnet_pending_msg));
494 priv->stats.tx_errors++;
496 return -ENOMEM;
500 /* get the beginning of the first cacheline and end of last */
501 start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1));
502 end_addr = L1_CACHE_ALIGN((u64) skb->tail);
504 /* calculate how many bytes to embed in the XPC message */
505 embedded_bytes = 0;
506 if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
507 /* skb->data does fit so embed */
508 embedded_bytes = skb->len;
513 * Since the send occurs asynchronously, we set the count to one
514 * and begin sending. Any sends that happen to complete before
515 * we are done sending will not free the skb. We will be left
516 * with that task during exit. This also handles the case of
517 * a packet destined for a partition which is no longer up.
519 atomic_set(&queued_msg->use_count, 1);
520 queued_msg->skb = skb;
523 second_mac_octet = skb->data[XPNET_PARTID_OCTET];
524 if (second_mac_octet == 0xff) {
525 /* we are being asked to broadcast to all partitions */
526 dp = xpnet_broadcast_partitions;
527 } else if (second_mac_octet != 0) {
528 dp = xpnet_broadcast_partitions &
529 (1UL << (second_mac_octet - 1));
530 } else {
531 /* 0 is an invalid partid. Ignore */
532 dp = 0;
534 dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
537 * If we wanted to allow promiscous mode to work like an
538 * unswitched network, this would be a good point to OR in a
539 * mask of partitions which should be receiving all packets.
543 * Main send loop.
545 for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
546 dest_partid++) {
549 if (!(dp & (1UL << (dest_partid - 1)))) {
550 /* not destined for this partition */
551 continue;
554 /* remove this partition from the destinations mask */
555 dp &= ~(1UL << (dest_partid - 1));
558 /* found a partition to send to */
560 ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
561 XPC_NOWAIT, (void **)&msg);
562 if (unlikely(ret != xpcSuccess)) {
563 continue;
566 msg->embedded_bytes = embedded_bytes;
567 if (unlikely(embedded_bytes != 0)) {
568 msg->version = XPNET_VERSION_EMBED;
569 dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
570 &msg->data, skb->data, (size_t) embedded_bytes);
571 memcpy(&msg->data, skb->data, (size_t) embedded_bytes);
572 } else {
573 msg->version = XPNET_VERSION;
575 msg->magic = XPNET_MAGIC;
576 msg->size = end_addr - start_addr;
577 msg->leadin_ignore = (u64) skb->data - start_addr;
578 msg->tailout_ignore = end_addr - (u64) skb->tail;
579 msg->buf_pa = __pa(start_addr);
581 dev_dbg(xpnet, "sending XPC message to %d:%d\nmsg->buf_pa="
582 "0x%lx, msg->size=%u, msg->leadin_ignore=%u, "
583 "msg->tailout_ignore=%u\n", dest_partid,
584 XPC_NET_CHANNEL, msg->buf_pa, msg->size,
585 msg->leadin_ignore, msg->tailout_ignore);
588 atomic_inc(&queued_msg->use_count);
590 ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
591 xpnet_send_completed, queued_msg);
592 if (unlikely(ret != xpcSuccess)) {
593 atomic_dec(&queued_msg->use_count);
594 continue;
599 if (atomic_dec_return(&queued_msg->use_count) == 0) {
600 dev_dbg(xpnet, "no partitions to receive packet destined for "
601 "%d\n", dest_partid);
604 dev_kfree_skb(skb);
605 kfree(queued_msg);
608 priv->stats.tx_packets++;
609 priv->stats.tx_bytes += skb->len;
611 return 0;
616 * Deal with transmit timeouts coming from the network layer.
618 static void
619 xpnet_dev_tx_timeout (struct net_device *dev)
621 struct xpnet_dev_private *priv;
624 priv = (struct xpnet_dev_private *) dev->priv;
626 priv->stats.tx_errors++;
627 return;
631 static int __init
632 xpnet_init(void)
634 int i;
635 u32 license_num;
636 int result = -ENOMEM;
639 if (!ia64_platform_is("sn2")) {
640 return -ENODEV;
643 dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
646 * use ether_setup() to init the majority of our device
647 * structure and then override the necessary pieces.
649 xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
650 XPNET_DEVICE_NAME, ether_setup);
651 if (xpnet_device == NULL) {
652 return -ENOMEM;
655 netif_carrier_off(xpnet_device);
657 xpnet_device->mtu = XPNET_DEF_MTU;
658 xpnet_device->change_mtu = xpnet_dev_change_mtu;
659 xpnet_device->open = xpnet_dev_open;
660 xpnet_device->get_stats = xpnet_dev_get_stats;
661 xpnet_device->stop = xpnet_dev_stop;
662 xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit;
663 xpnet_device->tx_timeout = xpnet_dev_tx_timeout;
664 xpnet_device->set_config = xpnet_dev_set_config;
667 * Multicast assumes the LSB of the first octet is set for multicast
668 * MAC addresses. We chose the first octet of the MAC to be unlikely
669 * to collide with any vendor's officially issued MAC.
671 xpnet_device->dev_addr[0] = 0xfe;
672 xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
673 license_num = sn_partition_serial_number_val();
674 for (i = 3; i >= 0; i--) {
675 xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
676 license_num & 0xff;
677 license_num = license_num >> 8;
681 * ether_setup() sets this to a multicast device. We are
682 * really not supporting multicast at this time.
684 xpnet_device->flags &= ~IFF_MULTICAST;
687 * No need to checksum as it is a DMA transfer. The BTE will
688 * report an error if the data is not retrievable and the
689 * packet will be dropped.
691 xpnet_device->features = NETIF_F_NO_CSUM;
693 result = register_netdev(xpnet_device);
694 if (result != 0) {
695 free_netdev(xpnet_device);
698 return result;
700 module_init(xpnet_init);
703 static void __exit
704 xpnet_exit(void)
706 dev_info(xpnet, "unregistering network device %s\n",
707 xpnet_device[0].name);
709 unregister_netdev(xpnet_device);
711 free_netdev(xpnet_device);
713 module_exit(xpnet_exit);
716 MODULE_AUTHOR("Silicon Graphics, Inc.");
717 MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)");
718 MODULE_LICENSE("GPL");